def getReplacedSVGTemplateLines(self, fileName, rotatedBoundaryLayers):
"Get the lines of text from the svg_template.txt file."
#( layers.length + 1 ) * (margin + sliceDimY * unitScale + txtHeight) + margin + txtHeight + margin + 110
svgTemplateText = gcodec.getFileTextInFileDirectory(
__file__, 'svg_template.svg')
originalTextLines = gcodec.getTextLines(svgTemplateText)
self.margin = getParameterFromJavascript(originalTextLines, 'margin',
self.margin)
self.textHeight = getParameterFromJavascript(originalTextLines,
'textHeight',
self.textHeight)
javascriptControlsWidth = getParameterFromJavascript(
originalTextLines, 'javascripControlBoxX', 510.0)
noJavascriptControlsHeight = getParameterFromJavascript(
originalTextLines, 'noJavascriptControlBoxY', 110.0)
controlTop = len(rotatedBoundaryLayers) * (
self.margin + self.extent.y * self.unitScale +
self.textHeight) + 2.0 * self.margin + self.textHeight
# width = margin + (sliceDimX * unitScale) + margin;
svgTemplateText = getReplacedInQuotes(
'height',
self.getRounded(controlTop + noJavascriptControlsHeight +
self.margin), svgTemplateText)
width = 2.0 * self.margin + max(self.extent.y * self.unitScale,
javascriptControlsWidth)
svgTemplateText = getReplacedInQuotes('width', self.getRounded(width),
svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'layerThickness', self.getRounded(self.layerThickness),
svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'maxX', self.getRounded(self.cornerMaximum.x), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'minX', self.getRounded(self.cornerMinimum.x), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'dimX', self.getRounded(self.extent.x), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'maxY', self.getRounded(self.cornerMaximum.y), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'minY', self.getRounded(self.cornerMinimum.y), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'dimY', self.getRounded(self.extent.y), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'maxZ', self.getRounded(self.cornerMaximum.z), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'minZ', self.getRounded(self.cornerMinimum.z), svgTemplateText)
svgTemplateText = getReplacedWordAndInQuotes(
'dimZ', self.getRounded(self.extent.z), svgTemplateText)
summarizedFilename = gcodec.getSummarizedFilename(
fileName) + ' SVG Slice File'
svgTemplateText = getReplacedWordAndInQuotes('Title',
summarizedFilename,
svgTemplateText)
noJavascriptControlsTagString = '<g id="noJavascriptControls" fill="#000" transform="translate(%s, %s)">' % (
self.getRounded(self.margin), self.getRounded(controlTop))
svgTemplateText = getReplacedTagString(noJavascriptControlsTagString,
'noJavascriptControls',
svgTemplateText)
# <g id="noJavascriptControls" fill="#000" transform="translate(20, 1400)">
return gcodec.getTextLines(svgTemplateText)
def getCraftedGcode(self, gcodeText, coolRepository):
"Parse gcode text and store the cool gcode."
self.coolRepository = coolRepository
self.coolEndText = preferences.getFileInAlterationsOrGivenDirectory(os.path.dirname(__file__), "Cool_End.gcode")
self.coolEndLines = gcodec.getTextLines(self.coolEndText)
self.coolStartText = preferences.getFileInAlterationsOrGivenDirectory(
os.path.dirname(__file__), "Cool_Start.gcode"
)
self.coolStartLines = gcodec.getTextLines(self.coolStartText)
self.cornerMaximum = complex(-999999999.0, -999999999.0)
self.cornerMinimum = complex(999999999.0, 999999999.0)
self.halfCorner = complex(coolRepository.minimumOrbitalRadius.value, coolRepository.minimumOrbitalRadius.value)
self.lines = gcodec.getTextLines(gcodeText)
self.minimumArea = 4.0 * coolRepository.minimumOrbitalRadius.value * coolRepository.minimumOrbitalRadius.value
self.parseInitialization()
for lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[lineIndex]
self.parseCorner(line)
margin = 0.2 * self.perimeterWidth
halfCornerMargin = self.halfCorner + complex(margin, margin)
self.cornerMaximum -= halfCornerMargin
self.cornerMinimum += halfCornerMargin
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
if coolRepository.turnFanOffAtEnding.value:
self.distanceFeedRate.addLine("M107")
return self.distanceFeedRate.output.getvalue()
def getReplacedSVGTemplateLines( self, fileName, rotatedBoundaryLayers ): "Get the lines of text from the svg_template.tmpl file." #( layers.length + 1 ) * (margin + sliceDimY * unitScale + txtHeight) + margin + txtHeight + margin + 110 svgTemplateText = gcodec.getFileTextInFileDirectory( __file__, 'svg_template.tmpl' ) originalTextLines = gcodec.getTextLines( svgTemplateText ) self.margin = getParameterFromJavascript( originalTextLines, 'margin', self.margin ) self.textHeight = getParameterFromJavascript( originalTextLines, 'textHeight', self.textHeight ) javascriptControlsWidth = getParameterFromJavascript( originalTextLines, 'javascripControlBoxX', 510.0 ) noJavascriptControlsHeight = getParameterFromJavascript( originalTextLines, 'noJavascriptControlBoxY', 110.0 ) controlTop = len( rotatedBoundaryLayers ) * ( self.margin + self.extent.y * self.unitScale + self.textHeight ) + 2.0 * self.margin + self.textHeight # width = margin + (sliceDimX * unitScale) + margin; svgTemplateText = getReplacedInQuotes( 'height', self.getRounded( controlTop + noJavascriptControlsHeight + self.margin ), svgTemplateText ) width = 2.0 * self.margin + max( self.extent.y * self.unitScale, javascriptControlsWidth ) svgTemplateText = getReplacedInQuotes( 'width', self.getRounded( width ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'layerThickness', self.getRounded( self.layerThickness ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'maxX', self.getRounded( self.cornerMaximum.x ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'minX', self.getRounded( self.cornerMinimum.x ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'dimX', self.getRounded( self.extent.x ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'maxY', self.getRounded( self.cornerMaximum.y ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'minY', self.getRounded( self.cornerMinimum.y ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'dimY', self.getRounded( self.extent.y ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'maxZ', self.getRounded( self.cornerMaximum.z ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'minZ', self.getRounded( self.cornerMinimum.z ), svgTemplateText ) svgTemplateText = getReplacedWordAndInQuotes( 'dimZ', self.getRounded( self.extent.z ), svgTemplateText ) summarizedFilename = gcodec.getSummarizedFilename( fileName ) + ' SVG Slice File' svgTemplateText = getReplacedWordAndInQuotes( 'Title', summarizedFilename, svgTemplateText ) noJavascriptControlsTagString = '<g id="noJavascriptControls" fill="#000" transform="translate(%s, %s)">' % ( self.getRounded( self.margin ), self.getRounded( controlTop ) ) svgTemplateText = getReplacedTagString( noJavascriptControlsTagString, 'noJavascriptControls', svgTemplateText ) # <g id="noJavascriptControls" fill="#000" transform="translate(20, 1400)"> return gcodec.getTextLines( svgTemplateText )
def getCraftedGcode( self, gcodeText, homePreferences ): "Parse gcode text and store the home gcode." self.lines = gcodec.getTextLines( gcodeText ) self.homePreferences = homePreferences self.parseInitialization( homePreferences ) self.homingText = preferences.getFileInAlterationsOrGivenDirectory( os.path.dirname( __file__ ), homePreferences.nameOfHomingFile.value ) self.homingLines = gcodec.getTextLines( self.homingText ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode(self, gcodeText, homeRepository):
"Parse gcode text and store the home gcode."
self.homingText = settings.getFileInAlterationsOrGivenDirectory(
os.path.dirname(__file__), homeRepository.nameOfHomingFile.value)
if len(self.homingText) < 1:
return gcodeText
self.lines = gcodec.getTextLines(gcodeText)
self.homeRepository = homeRepository
self.parseInitialization(homeRepository)
self.homingLines = gcodec.getTextLines(self.homingText)
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
return self.distanceFeedRate.output.getvalue()
def parseGcode(self, combPreferences, gcodeText):
"Parse gcode text and store the comb gcode."
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization(combPreferences)
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseAddJitter(line)
self.lines = gcodec.getTextLines(self.output.getvalue())
self.initializeMoreParameters()
for self.lineIndex in xrange(len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(combPreferences, line)
for self.lineIndex in xrange(len(self.lines)):
line = self.lines[self.lineIndex]
self.parseAddTravel(line)
def parseGcode( self, combPreferences, gcodeText ): "Parse gcode text and store the comb gcode." self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization( combPreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseAddJitter( line ) self.lines = gcodec.getTextLines( self.output.getvalue() ) self.initializeMoreParameters() for self.lineIndex in xrange( len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( combPreferences, line ) for self.lineIndex in xrange( len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseAddTravel( line )
def parseGcode( self, gcodeText, loopTailorPreferences ): "Parse gcode text and store the clip gcode." self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization( loopTailorPreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def parseGcode( self, fileName, gcodeText, beholdPreferences ): "Parse gcode text and store the vector output." self.beholdPreferences = beholdPreferences self.fileName = fileName self.gcodeText = gcodeText self.initializeActiveLocation() self.cornerHigh = Vector3( - 999999999.0, - 999999999.0, - 999999999.0 ) self.cornerLow = Vector3( 999999999.0, 999999999.0, 999999999.0 ) self.goAroundExtruderOffTravel = beholdPreferences.goAroundExtruderOffTravel.value self.lines = gcodec.getTextLines( gcodeText ) self.isThereALayerStartWord = gcodec.isThereAFirstWord( '(<layer>', self.lines, 1 ) for line in self.lines: self.parseCorner( line ) if len( self.layerTops ) > 0: self.layerTops[ - 1 ] += 912345678.9 if len( self.layerTops ) > 1: self.oneMinusBrightnessOverTopLayerIndex = ( 1.0 - beholdPreferences.bottomLayerBrightness.value ) / float( len( self.layerTops ) - 1 ) self.firstTopLayer = len( self.layerTops ) - self.beholdPreferences.numberOfFillTopLayers.value self.centerComplex = 0.5 * ( self.cornerHigh.dropAxis( 2 ) + self.cornerLow.dropAxis( 2 ) ) self.centerBottom = Vector3( self.centerComplex.real, self.centerComplex.imag, self.cornerLow.z ) self.scale = beholdPreferences.pixelsPerMillimeter.value self.scaleCenterBottom = self.scale * self.centerBottom self.scaleCornerHigh = self.scale * self.cornerHigh.dropAxis( 2 ) self.scaleCornerLow = self.scale * self.cornerLow.dropAxis( 2 ) print( "The lower left corner of the behold window is at %s, %s" % ( self.cornerLow.x, self.cornerLow.y ) ) print( "The upper right corner of the behold window is at %s, %s" % ( self.cornerHigh.x, self.cornerHigh.y ) ) self.cornerImaginaryTotal = self.cornerHigh.y + self.cornerLow.y margin = complex( 5.0, 5.0 ) self.marginCornerLow = self.scaleCornerLow - margin self.screenSize = margin + 2.0 * ( self.scaleCornerHigh - self.marginCornerLow ) self.initializeActiveLocation() for self.lineIndex in xrange( len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line ) self.skeinPanes.sort( compareLayerSequence )
def getCraftedGcode( self, gcodeStepRepository, gcodeText ): "Parse gcode text and store the gcode." self.gcodeStepRepository = gcodeStepRepository lines = gcodec.getTextLines( gcodeText ) for line in lines: self.parseLine( line ) return self.output.getvalue()
def parseGcode( self, gcodeText, skeinviewPreferences ): "Parse gcode text and store the vector output." self.arrowType = None if skeinviewPreferences.drawArrows.value: self.arrowType = 'last' self.initializeActiveLocation() self.cornerHigh = Vector3( - 999999999.0, - 999999999.0, - 999999999.0 ) self.cornerLow = Vector3( 999999999.0, 999999999.0, 999999999.0 ) self.goAroundExtruderOffTravel = skeinviewPreferences.goAroundExtruderOffTravel.value self.lines = gcodec.getTextLines( gcodeText ) self.isThereALayerStartWord = gcodec.isThereAFirstWord( '(<layer>', self.lines, 1 ) for line in self.lines: self.parseCorner( line ) self.scale = skeinviewPreferences.pixelsWidthExtrusion.value / abs( self.extrusionWidth ) self.scaleCornerHigh = self.scale * self.cornerHigh.dropAxis( 2 ) self.scaleCornerLow = self.scale * self.cornerLow.dropAxis( 2 ) print( "The lower left corner of the skeinview window is at %s, %s" % ( self.cornerLow.x, self.cornerLow.y ) ) print( "The upper right corner of the skeinview window is at %s, %s" % ( self.cornerHigh.x, self.cornerHigh.y ) ) self.cornerImaginaryTotal = self.cornerHigh.y + self.cornerLow.y margin = complex( 5.0, 5.0 ) self.marginCornerLow = self.scaleCornerLow - margin self.scaleSize = margin + self.scaleCornerHigh - self.marginCornerLow self.initializeActiveLocation() self.colorNames = [ 'brown', 'red', 'orange', 'yellow', 'green', 'blue', 'purple' ] for self.lineIndex in xrange( len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def parseGcode(self, fileName, gcodeText, repository):
"Parse gcode text and store the vector output."
self.fileName = fileName
self.gcodeText = gcodeText
self.repository = repository
self.initializeActiveLocation()
self.cornerHigh = Vector3(-999999999.0, -999999999.0, -999999999.0)
self.cornerLow = Vector3(999999999.0, 999999999.0, 999999999.0)
self.lines = gcodec.getTextLines(gcodeText)
self.isThereALayerStartWord = gcodec.isThereAFirstWord(
'(<layer>', self.lines, 1)
self.parseInitialization()
for line in self.lines[self.lineIndex:]:
self.parseCorner(line)
self.cornerHighComplex = self.cornerHigh.dropAxis(2)
self.cornerLowComplex = self.cornerLow.dropAxis(2)
self.scale = repository.scale.value
self.scaleCornerHigh = self.scale * self.cornerHighComplex
self.scaleCornerLow = self.scale * self.cornerLowComplex
self.cornerImaginaryTotal = self.cornerHigh.y + self.cornerLow.y
self.margin = complex(10.0, 10.0)
self.marginCornerHigh = self.scaleCornerHigh + self.margin
self.marginCornerLow = self.scaleCornerLow - self.margin
self.screenSize = self.marginCornerHigh - self.marginCornerLow
self.initializeActiveLocation()
self.colorNames = [
'brown', 'red', 'orange', 'yellow', 'green', 'blue', 'purple'
]
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
def parseGcode( self, gcodeText, twitterbotPreferences ): "Parse gcode text and store the twitterbot gcode." self.lines = gcodec.getTextLines( gcodeText ) self.twitterUsername = twitterbotPreferences.twitterUsername.value self.twitterPassword = twitterbotPreferences.twitterPassword.value self.layersBetweenTweets = twitterbotPreferences.layersBetweenTweets.value self.startMessage = twitterbotPreferences.startMessage.value self.progressMessage = twitterbotPreferences.progressMessage.value self.finishMessage = twitterbotPreferences.finishMessage.value self.quips = twitterbotPreferences.quips.value self.quipsList = self.quips.split( '|' ) #print( 'quipsList: ' + str ( self.quipsList ) ) self.prevQuip = '' self.percentageOfQuips = int( twitterbotPreferences.percentageOfQuips.value ) if self.percentageOfQuips <= 0 or self.percentageOfQuips > 10: self.percentageOfQuips = 3 if int( self.layersBetweenTweets ) < 1: self.layersBetweenTweets = 10 self.twitterHashtags = twitterbotPreferences.twitterHashtags.value self.parseInitialization( twitterbotPreferences ) #print( "===> self.lineIndex: " + str( self.lineIndex ) ) self.totalGcodeLines = len( self.lines ) self.linesBetweenQuips = int( round( self.totalGcodeLines / self.percentageOfQuips, 0 ) ) #print( 'self.linesBetweenQuips: ' + str( self.linesBetweenQuips ) ) #print( 'self.totalGcodeLines: ' + str( self.totalGcodeLines ) ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): # quip messages # print( '===> self.lineIndex: ' + str( self.lineIndex ) ) if self.lineIndex % self.linesBetweenQuips == 0 and self.lineIndex > 0 and self.isPrintFinished == False: self.addLine( self.createQuipMessage( self.lineIndex ) ) line = self.lines[ self.lineIndex ] # print( '===> Parsing line ' + str( self.lineIndex ) + ': ' + line ) self.parseLine( line )
def getCraftedGcode( self, gcodeText, binary16ByteRepository ): "Parse gcode text and store the gcode." self.binary16ByteRepository = binary16ByteRepository lines = gcodec.getTextLines( gcodeText ) for line in lines: self.parseLine( line ) return self.output.getvalue()
def getNavigationHypertext( fileText, transferredFileNameIndex, transferredFileNames ):
"Get the hypertext help with navigation lines."
helpTextEnd = fileText.find( '</p>' )
helpTextStart = fileText.find( '<p>' )
helpText = fileText[ helpTextStart : helpTextEnd ]
lines = gcodec.getTextLines( helpText )
headings = []
headingLineTable = {}
for line in lines:
addToHeadings( headingLineTable, headings, line )
headingsToBeenAdded = True
output = cStringIO.StringIO()
for line in lines:
if line[ : 2 ] == '==':
if headingsToBeenAdded:
output.write( '<br />\n' )
for heading in headings:
heading.addToOutput( output )
output.write( '<br />\n' )
headingsToBeenAdded = False
if line in headingLineTable:
line = headingLineTable[ line ]
output.write( line + '\n' )
helpText = output.getvalue()
previousFileName = 'contents.html'
previousIndex = transferredFileNameIndex - 1
if previousIndex >= 0:
previousFileName = transferredFileNames[ previousIndex ]
previousLinkText = '<a href="%s">Previous</a>' % previousFileName
navigationLine = getNavigationLine( '<a href="contents.html">Contents</a>', previousLinkText, getNextLinkText( transferredFileNames, transferredFileNameIndex + 1 ) )
helpText = navigationLine + helpText + '<br />\n<br />\n' + navigationLine + '<hr>\n'
return fileText[ : helpTextStart ] + helpText + fileText[ helpTextEnd : ]
def getCraftedGcode(self, gcodeText, binary16ByteRepository):
"Parse gcode text and store the gcode."
self.binary16ByteRepository = binary16ByteRepository
lines = gcodec.getTextLines(gcodeText)
for line in lines:
self.parseLine(line)
return self.output.getvalue()
def parseGcode( self, fileName, gcodeText, skeinviewPreferences ): "Parse gcode text and store the vector output." self.fileName = fileName self.gcodeText = gcodeText self.initializeActiveLocation() self.cornerHigh = Vector3( - 999999999.0, - 999999999.0, - 999999999.0 ) self.cornerLow = Vector3( 999999999.0, 999999999.0, 999999999.0 ) self.goAroundExtruderOffTravel = skeinviewPreferences.goAroundExtruderOffTravel.value self.lines = gcodec.getTextLines( gcodeText ) self.isThereALayerStartWord = gcodec.isThereAFirstWord( '(<layer>', self.lines, 1 ) for line in self.lines: self.parseCorner( line ) self.cornerHighComplex = self.cornerHigh.dropAxis( 2 ) self.cornerLowComplex = self.cornerLow.dropAxis( 2 ) self.scale = skeinviewPreferences.pixelsPerMillimeter.value self.scaleCornerHigh = self.scale * self.cornerHighComplex self.scaleCornerLow = self.scale * self.cornerLowComplex self.cornerImaginaryTotal = self.cornerHigh.y + self.cornerLow.y self.margin = complex( 10.0, 10.0 ) self.marginCornerHigh = self.scaleCornerHigh + self.margin self.marginCornerLow = self.scaleCornerLow - self.margin self.screenSize = self.marginCornerHigh - self.marginCornerLow self.initializeActiveLocation() self.colorNames = [ 'brown', 'red', 'orange', 'yellow', 'green', 'blue', 'purple' ] for self.lineIndex in xrange( len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def getCraftedGcode( self, gcodeText, raftRepository ): "Parse gcode text and store the raft gcode." self.raftRepository = raftRepository self.supportEndText = preferences.getFileInAlterationsOrGivenDirectory( os.path.dirname( __file__ ), 'Support_End.gcode' ) self.supportEndLines = gcodec.getTextLines( self.supportEndText ) self.supportStartText = preferences.getFileInAlterationsOrGivenDirectory( os.path.dirname( __file__ ), 'Support_Start.gcode' ) self.supportStartLines = gcodec.getTextLines( self.supportStartText ) self.minimumSupportRatio = math.tan( math.radians( raftRepository.supportMinimumAngle.value ) ) self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization() if raftRepository.addRaftElevateNozzleOrbitSetAltitude.value: self.addRaft() self.addTemperature( raftRepository.temperatureShapeFirstLayerOutline.value ) for line in self.lines[ self.lineIndex : ]: self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def parseGcode( self, fileName, gcodeText, repository ): "Parse gcode text and store the vector output." self.fileName = fileName self.gcodeText = gcodeText self.repository = repository self.initializeActiveLocation() self.cornerHigh = Vector3( - 999999999.0, - 999999999.0, - 999999999.0 ) self.cornerLow = Vector3( 999999999.0, 999999999.0, 999999999.0 ) self.lines = gcodec.getTextLines( gcodeText ) self.isThereALayerStartWord = gcodec.isThereAFirstWord( '(<layer>', self.lines, 1 ) self.parseInitialization() for line in self.lines[ self.lineIndex : ]: self.parseCorner( line ) self.cornerHighComplex = self.cornerHigh.dropAxis( 2 ) self.cornerLowComplex = self.cornerLow.dropAxis( 2 ) self.scale = repository.scale.value self.scaleCornerHigh = self.scale * self.cornerHighComplex self.scaleCornerLow = self.scale * self.cornerLowComplex self.cornerImaginaryTotal = self.cornerHigh.y + self.cornerLow.y self.margin = complex( 10.0, 10.0 ) self.marginCornerHigh = self.scaleCornerHigh + self.margin self.marginCornerLow = self.scaleCornerLow - self.margin self.screenSize = self.marginCornerHigh - self.marginCornerLow self.initializeActiveLocation() self.colorNames = [ 'brown', 'red', 'orange', 'yellow', 'green', 'blue', 'purple' ] for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def getCraftedGcode( self, gcodeText, flowRepository ): "Parse gcode text and store the flow gcode." self.flowRepository = flowRepository self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization() for line in self.lines[ self.lineIndex : ]: self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def readPreferencesFromText(archivablePreferences, text):
"Set an archive to the preferences read from a text."
lines = gcodec.getTextLines(text)
preferenceTable = {}
for preference in archivablePreferences.archive:
preference.addToPreferenceTable(preferenceTable)
for lineIndex in xrange(len(lines)):
setArchiveToLine(lineIndex, lines, preferenceTable)
def __init__( self, xmlText ): "Add empty lists." self.isInComment = False self.parents = [] self.rootElement = None self.lines = gcodec.getTextLines( xmlText ) for line in self.lines: self.parseLine( line )
def parseGcode( self, gcodeText, oozebanePreferences ): "Parse gcode text and store the oozebane gcode." self.lines = gcodec.getTextLines( gcodeText ) self.oozebanePreferences = oozebanePreferences self.parseInitialization( oozebanePreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def parseGcode( self, gcodeText, stretchPreferences ): "Parse gcode text and store the stretch gcode." self.lines = gcodec.getTextLines( gcodeText ) self.stretchPreferences = stretchPreferences self.parseInitialization() for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseStretch( line )
def addFacesGivenText(stlText, triangleMesh, vertexIndexTable):
"Add faces given stl text."
lines = gcodec.getTextLines(stlText)
vertices = []
for line in lines:
if line.find('vertex') != -1:
vertices.append(getVertexGivenLine(line))
addFacesGivenVertices(triangleMesh, vertexIndexTable, vertices)
def getCraftedGcode(self, clipRepository, gcodeText):
"Parse gcode text and store the clip gcode."
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization(clipRepository)
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
return self.distanceFeedRate.output.getvalue()
def __init__(self, xmlText):
"Add empty lists."
self.isInComment = False
self.parents = []
self.rootElement = None
self.lines = gcodec.getTextLines(xmlText)
for line in self.lines:
self.parseLine(line)
def getCraftedGcode( self, clipPreferences, gcodeText ): "Parse gcode text and store the clip gcode." self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization( clipPreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def addFromUpperLowerFile( self, fileName ): "Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory." fileText = preferences.getFileInGivenPreferencesDirectory( os.path.dirname( __file__ ), fileName ) if fileText == '': return fileLines = gcodec.getTextLines( fileText ) for line in fileLines: self.addLine( line )
def getCraftedGcode(self, gcodeText, flowRepository):
"Parse gcode text and store the flow gcode."
self.flowRepository = flowRepository
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization()
for line in self.lines[self.lineIndex:]:
self.parseLine(line)
return self.distanceFeedRate.output.getvalue()
def parseGcode( self, gcodeText, hopPreferences ): "Parse gcode text and store the hop gcode." self.lines = gcodec.getTextLines( gcodeText ) self.minimumSlope = math.tan( math.radians( hopPreferences.minimumHopAngle.value ) ) self.parseInitialization( hopPreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def readPreferencesFromText( archivablePreferences, text ):
"Set an archive to the preferences read from a text."
lines = gcodec.getTextLines( text )
preferenceTable = {}
for preference in archivablePreferences.archive:
preference.addToPreferenceTable( preferenceTable )
for lineIndex in xrange( len( lines ) ):
setArchiveToLine( lineIndex, lines, preferenceTable )
def addFacesGivenText( stlText, triangleMesh, vertexIndexTable ): "Add faces given stl text." lines = gcodec.getTextLines( stlText ) vertices = [] for line in lines: if line.find( 'vertex' ) != - 1: vertices.append( getVertexGivenLine( line ) ) addFacesGivenVertices( triangleMesh, vertexIndexTable, vertices )
def getCraftedGcode( self, gcodeText, coolPreferences ): "Parse gcode text and store the cool gcode." self.coolPreferences = coolPreferences self.coolEndText = preferences.getFileInAlterationsOrGivenDirectory( os.path.dirname( __file__ ), 'Cool_End.gcode' ) self.coolEndLines = gcodec.getTextLines( self.coolEndText ) self.coolStartText = preferences.getFileInAlterationsOrGivenDirectory( os.path.dirname( __file__ ), 'Cool_Start.gcode' ) self.coolStartLines = gcodec.getTextLines( self.coolStartText ) self.halfCorner = complex( coolPreferences.minimumOrbitalRadius.value, coolPreferences.minimumOrbitalRadius.value ) self.lines = gcodec.getTextLines( gcodeText ) self.minimumArea = 4.0 * coolPreferences.minimumOrbitalRadius.value * coolPreferences.minimumOrbitalRadius.value self.parseInitialization() for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line ) if coolPreferences.turnFanOffAtEnding.value: self.distanceFeedRate.addLine( 'M107' ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode( self, gcodeText, repository ): "Parse gcode text and store the bevel gcode." self.repository = repository self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization() for lineIndex in xrange( self.lineIndex, len( self.lines ) ): self.parseLine( lineIndex ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode( self, whittlePreferences, gcodeText ): "Parse gcode text and store the whittle gcode." self.whittlePreferences = whittlePreferences self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization() for line in self.lines[ self.lineIndex : ]: self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def parseGcode(self, gcodeText, stretchPreferences):
"Parse gcode text and store the stretch gcode."
self.lines = gcodec.getTextLines(gcodeText)
self.stretchPreferences = stretchPreferences
self.parseInitialization()
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseStretch(line)
def getCraftedGcode(self, gcodeText, repository):
"Parse gcode text and store the bevel gcode."
self.repository = repository
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization()
for lineIndex in xrange(self.lineIndex, len(self.lines)):
self.parseLine(lineIndex)
return self.distanceFeedRate.output.getvalue()
def getCraftedGcode( self, jitterRepository, gcodeText ): "Parse gcode text and store the jitter gcode." self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization( jitterRepository ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseAddJitter( line ) return self.distanceFeedRate.output.getvalue()
def parseGcode(self, gcodeText, raftlessPreferences):
"Parse gcode text and store the raftless gcode."
self.raftlessPreferences = raftlessPreferences
self.wantsExtrusionIntro = self.raftlessPreferences.addExtrusionIntro.value
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization()
for line in self.lines[self.lineIndex:]:
self.parseLine(line)
return self.distanceFeedRate.output.getvalue()
def parseGcode( self, gcodeText, coolPreferences ): "Parse gcode text and store the cool gcode." self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization( coolPreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( coolPreferences, line ) if coolPreferences.turnFanOffAtEnding.value: self.addLine( 'M107' )
def getCraftedGcode(self, gcodeText, stretchRepository):
"Parse gcode text and store the stretch gcode."
self.lines = gcodec.getTextLines(gcodeText)
self.stretchRepository = stretchRepository
self.parseInitialization()
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseStretch(line)
return self.distanceFeedRate.output.getvalue()
def parseGcode(self, gcodeText, hopPreferences):
"Parse gcode text and store the hop gcode."
self.lines = gcodec.getTextLines(gcodeText)
self.minimumSlope = math.tan(
math.radians(hopPreferences.minimumHopAngle.value))
self.parseInitialization(hopPreferences)
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
def getCraftedGcode( self, gcodeText, hopRepository ): "Parse gcode text and store the hop gcode." self.lines = gcodec.getTextLines( gcodeText ) self.minimumSlope = math.tan( math.radians( hopRepository.minimumHopAngle.value ) ) self.parseInitialization( hopRepository ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def parseGcode( self, filletPreferences, gcodeText ): "Parse gcode text and store the bevel gcode." self.cornerFeedrateOverOperatingFeedrate = filletPreferences.cornerFeedrateOverOperatingFeedrate.value self.lines = gcodec.getTextLines( gcodeText ) self.filletPreferences = filletPreferences self.parseInitialization( filletPreferences ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line )
def addFromUpperLowerFile(self, fileName):
"Add lines of text from the fileName or the lowercase fileName, if there is no file by the original fileName in the directory."
fileText = preferences.getFileInGivenPreferencesDirectory(
os.path.dirname(__file__), fileName)
if fileText == '':
return
fileLines = gcodec.getTextLines(fileText)
for line in fileLines:
self.addLine(line)
def getCraftedGcode( self, gcodeText, oozebaneRepository ): "Parse gcode text and store the oozebane gcode." self.lines = gcodec.getTextLines( gcodeText ) self.oozebaneRepository = oozebaneRepository self.parseInitialization( oozebaneRepository ) for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode( self, gcodeText, repository ): "Parse gcode text and store the raftless gcode." self.repository = repository self.wantsExtrusionIntro=self.repository.addExtrusionIntro.value self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization() for line in self.lines[ self.lineIndex : ]: self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode( self, gcodeText, repository ): "Parse gcode text and store the temperature gcode." self.repository = repository self.lines = gcodec.getTextLines( gcodeText ) self.parseInitialization() self.distanceFeedRate.addLines( self.lines[ self.lineIndex : ] ) # for line in self.lines[ self.lineIndex : ]: # self.parseLine( line ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode( self, gcodeText, stretchRepository ): "Parse gcode text and store the stretch gcode." self.lines = gcodec.getTextLines( gcodeText ) self.stretchRepository = stretchRepository self.parseInitialization() for self.lineIndex in xrange( self.lineIndex, len( self.lines ) ): line = self.lines[ self.lineIndex ] self.parseStretch( line ) return self.distanceFeedRate.output.getvalue()
def getCraftedGcode(self, gcodeText, repository):
"Parse gcode text and store the drill gcode."
self.lines = gcodec.getTextLines(gcodeText)
self.repository = repository
self.parseInitialization()
for line in self.lines[self.lineIndex:]:
self.parseSurroundingLoop(line)
for line in self.lines[self.lineIndex:]:
self.parseLine(line)
return self.distanceFeedRate.output.getvalue()
def getCraftedGcode(self, filletRepository, gcodeText):
"Parse gcode text and store the bevel gcode."
self.cornerFeedRateOverOperatingFeedRate = filletRepository.cornerFeedRateOverOperatingFeedRate.value
self.lines = gcodec.getTextLines(gcodeText)
self.filletRepository = filletRepository
self.parseInitialization(filletRepository)
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
return self.distanceFeedRate.output.getvalue()
def parseSVG(self, svgText):
"Parse SVG text and store the layers."
if svgText == '':
return None
svgText = svgText.replace('\t', ' ')
svgText = svgText.replace(';', ' ')
self.lines = gcodec.getTextLines(svgText)
self.parseInitialization()
for lineIndex in xrange(self.lineIndex, len(self.lines)):
self.parseLine(lineIndex)
def addFacesGivenText(objText, triangleMesh):
"Add faces given obj text."
lines = gcodec.getTextLines(objText)
for line in lines:
splitLine = line.split()
firstWord = gcodec.getFirstWord(splitLine)
if firstWord == 'v':
triangleMesh.vertices.append(getVertexGivenLine(line))
elif firstWord == 'f':
triangleMesh.faces.append(getFaceGivenLine(line, triangleMesh))
def getCraftedGcode(self, gcodeText, repository):
"Parse gcode text and store the coil gcode."
self.repository = repository
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization()
self.parseBoundaries()
self.parseUntilLayer()
self.addCoilLayers()
self.distanceFeedRate.addLines(self.shutdownLines)
return self.distanceFeedRate.output.getvalue()
def parseGcode(self, unpausePreferences, gcodeText):
"Parse gcode text and store the unpause gcode."
self.delaySecond = unpausePreferences.delay.value * 0.001
self.maximumSpeed = unpausePreferences.maximumSpeed.value
self.minimumSpeedUpReciprocal = 1.0 / self.maximumSpeed
self.unpausePreferences = unpausePreferences
self.lines = gcodec.getTextLines(gcodeText)
self.parseInitialization()
for self.lineIndex in xrange(self.lineIndex, len(self.lines)):
line = self.lines[self.lineIndex]
self.parseLine(line)
