def runcode(self, code, source):
"""Execute a code object.
This version temporarily re-assigns sys.displayhook
so as to give feedback about type when echoing a value
entered at the prompt.
"""
saved_dp = sys.displayhook
sys.displayhook = self.show_expression_value
try:
exec_code(code, self.locals, source=source, username=self.username)
#exec code in self.locals
except:
sys.stderr.write(errors.simplify_traceback(source, self.username))
else:
if softspace(sys.stdout, 0):
print
sys.displayhook = saved_dp
def runcode(self, code, source):
"""Execute a code object.
When an exception occurs, errors.simplify_traceback() is called to
display a traceback. All exceptions are caught.
A note about KeyboardInterrupt: this exception may occur
elsewhere in this code, and may not always be caught. The
caller should be prepared to deal with it.
"""
try:
exec_code(code, self.locals, source=source, username=self.username)
#exec code in self.locals
except:
sys.stderr.write(errors.simplify_traceback(source, self.username))
else:
if softspace(sys.stdout, 0):
print('')
def runcode(self, code, source):
"""Execute a code object.
This version temporarily re-assigns sys.displayhook
so as to give feedback about type when echoing a value
entered at the prompt.
"""
saved_dp = sys.displayhook
sys.displayhook = self.show_expression_value
try:
exec_code(code, self.locals, source=source, username=self.username)
# exec code in self.locals
except:
sys.stderr.write(errors.simplify_traceback(source, self.username))
else:
if softspace(sys.stdout, 0):
print
sys.displayhook = saved_dp
def runcode(self, code, source):
"""Execute a code object.
When an exception occurs, errors.simplify_traceback() is called to
display a traceback. All exceptions are caught.
A note about KeyboardInterrupt: this exception may occur
elsewhere in this code, and may not always be caught. The
caller should be prepared to deal with it.
"""
try:
exec_code(code, self.locals, source=source, username=self.username)
# exec code in self.locals
except:
sys.stderr.write(errors.simplify_traceback(source, self.username))
else:
if softspace(sys.stdout, 0):
print("")
def run(self):
"""run the code, redirecting stdout, stderr, stdin and
returning the string representing the output
"""
sys.stdin.register_thread(self.channel)
sys.stdout.register_thread(self.channel)
sys.stderr.register_thread(self.channel)
try:
try:
self.ccode = compile(self.code, "User's code", 'exec')
except:
try:
if self.friendly:
sys.stderr.write(errors.simplify_traceback(self.code, self.username))
else:
traceback.print_exc()
return
except:
sys.stderr.write("Recovering from internal error in Interpreter.run()")
sys.stderr.write("self.channel =%s"%self.channel)
return
if not self.ccode: #code does nothing
return
try:
# logging the user input first, if required
if self.username and self.channel in config[self.username]['logging_uids']:
vlam_type = config[self.username]['logging_uids'][self.channel][1]
if vlam_type == 'editor':
user_code = self.code.split("\n")
log_id = config[self.username]['logging_uids'][self.channel][0]
if user_code:
user_code = '\n'.join(user_code)
if not user_code.endswith('\n'):
user_code += '\n'
else:
user_code = _("# no code entered by user\n")
data = "<span class='stdin'>" + user_code + "</span>"
config[self.username]['log'][log_id].append(data)
log_session(username)
exec_code(self.ccode, self.symbols, source=None,
username=self.username)
#exec self.ccode in self.symbols#, {}
# note: previously, the "local" directory used for exec
# was simply an empty directory. However, this meant that
# module names imported outside a function definition
# were not available inside that function. This is why
# we have commented out the {} as a reminder; self.symbols
# will be used for holding both global and local variables.
except:
try:
if self.friendly:
sys.stderr.write(errors.simplify_traceback(self.code, self.username))
else:
traceback.print_exc()
except:
sys.stderr.write("Recovering from internal error in Interpreter.run()")
sys.stderr.write(".. after trying to call exec_code.")
sys.stderr.write("self.channel = %s"%self.channel)
finally:
if self.doctest:
# attempting to log
if self.username and self.channel in config[self.username]['logging_uids']:
code_lines = self.code.split("\n")
user_code = []
for line in code_lines:
# __teststring identifies the beginning of the code
# that is passed to a doctest (see vlam_doctest.py)
# This will have been appended to the user's code.
if line.startswith("__teststring"):
break
user_code.append(line)
log_id = config[self.username]['logging_uids'][self.channel][0]
if user_code:
user_code = '\n' + '\n'.join(user_code)
if not user_code.endswith('\n'):
user_code += '\n'
else:
user_code = _("# no code entered by user\n")
# separating each attempts
user_code = "\n" + "- "*25 + "\n" + user_code
data = "<span class='stdin'>" + user_code + "</span>"
config[self.username]['log'][log_id].append(data)
log_session(self.username)
# proceed with regular output
if self.friendly:
message, success = errors.simplify_doctest_error_message(
self.doctest_out.getvalue())
if success:
sys.stdout.write(message)
else:
sys.stderr.write(message)
else:
sys.stdout.write(self.doctest_out.getvalue())
sys.stdin.unregister_thread()
sys.stdout.unregister_thread()
sys.stderr.unregister_thread()
def run(self):
"""run the code, redirecting stdout, stderr, stdin and
returning the string representing the output
"""
sys.stdin.register_thread(self.channel)
sys.stdout.register_thread(self.channel)
sys.stderr.register_thread(self.channel)
try:
try:
self.ccode = compile(self.code, "User's code", "exec")
except:
try:
if self.friendly:
sys.stderr.write(errors.simplify_traceback(self.code, self.username))
else:
traceback.print_exc()
return
except:
sys.stderr.write("Recovering from internal error in Interpreter.run()")
sys.stderr.write("self.channel =%s" % self.channel)
return
if not self.ccode: # code does nothing
return
try:
# logging the user input first, if required
if self.username and self.channel in config[self.username]["logging_uids"]:
vlam_type = config[self.username]["logging_uids"][self.channel][1]
if vlam_type == "editor":
user_code = self.code.split("\n")
log_id = config[self.username]["logging_uids"][self.channel][0]
if user_code:
user_code = "\n".join(user_code)
if not user_code.endswith("\n"):
user_code += "\n"
else:
user_code = _("# no code entered by user\n")
data = "<span class='stdin'>" + user_code + "</span>"
config[self.username]["log"][log_id].append(data)
log_session(username)
exec_code(self.ccode, self.symbols, source=None, username=self.username)
# exec self.ccode in self.symbols#, {}
# note: previously, the "local" directory used for exec
# was simply an empty directory. However, this meant that
# module names imported outside a function definition
# were not available inside that function. This is why
# we have commented out the {} as a reminder; self.symbols
# will be used for holding both global and local variables.
except:
try:
if self.friendly:
sys.stderr.write(errors.simplify_traceback(self.code, self.username))
else:
traceback.print_exc()
except:
sys.stderr.write("Recovering from internal error in Interpreter.run()")
sys.stderr.write(".. after trying to call exec_code.")
sys.stderr.write("self.channel = %s" % self.channel)
finally:
if self.doctest:
# attempting to log
if self.username and self.channel in config[self.username]["logging_uids"]:
code_lines = self.code.split("\n")
user_code = []
for line in code_lines:
# __teststring identifies the beginning of the code
# that is passed to a doctest (see vlam_doctest.py)
# This will have been appended to the user's code.
if line.startswith("__teststring"):
break
user_code.append(line)
log_id = config[self.username]["logging_uids"][self.channel][0]
if user_code:
user_code = "\n" + "\n".join(user_code)
if not user_code.endswith("\n"):
user_code += "\n"
else:
user_code = _("# no code entered by user\n")
# separating each attempts
user_code = "\n" + "- " * 25 + "\n" + user_code
data = "<span class='stdin'>" + user_code + "</span>"
config[self.username]["log"][log_id].append(data)
log_session(self.username)
# proceed with regular output
if self.friendly:
message, success = errors.simplify_doctest_error_message(self.doctest_out.getvalue())
if success:
sys.stdout.write(message)
else:
sys.stderr.write(message)
else:
sys.stdout.write(self.doctest_out.getvalue())
sys.stdin.unregister_thread()
sys.stdout.unregister_thread()
sys.stderr.unregister_thread()