Example #1
0
 def send(self, channel, cmd, data):
     assert isinstance(data, binary_type)
     assert len(data) <= 65535
     p = struct.pack('!ccHHH', b('S'), b('S'), channel, cmd, len(data)) + data
     self.outbuf.append(p)
     debug2(' > channel=%d cmd=%s len=%d (fullness=%d)\n'
            % (channel, cmd_to_name.get(cmd, hex(cmd)),
               len(data), self.fullness))
     self.fullness += len(data)
Example #2
0
    def _log(self, mux):

        #  Avoid double counting of the handlers.  Handlers contain both udp and dns channel.
        #  This is only true for the server.

        dns_channels = self.get_and_reset_max_dns_channels()
        udp_channels = self.get_and_reset_max_udp_channels()
        handlers = self.get_and_reset_max_handlers() - (dns_channels +
                                                        udp_channels)

        outbufs = self.get_and_reset_max_outbufs()
        fullness = self.get_and_reset_max_fullness()
        too_full_flush_count = self.get_and_reset_too_full_flush_count()
        mux_wrapper_buffer_size = self.get_and_reset_size_to_edge()
        paused_to_the_edge_count = self.get_and_reset_paused_to_edge_count()
        executed_read_count = self.get_and_reset_executed_read_count()
        executed_write_count = self.get_and_reset_executed_write_count()
        select_count = self.get_and_reset_select_count()
        mux_not_ready_for_read_count = self.get_and_reset_mux_not_ready_for_read_count(
        )
        mux_not_ready_for_write_count = self.get_and_reset_mux_not_ready_for_write_count(
        )

        # This is needed because the dns and upd channels are on a timer. Timing might make the max dns and udp to
        # be larger than handlers.

        if handlers < 0:
            handlers = 0

        # We manipulate these values.  Just guarding against mistakes.

        if fullness < 0:
            fullness = 0

        if mux_wrapper_buffer_size < 0:
            mux_wrapper_buffer_size = 0

        debug1(
            'handlers %d, dns_channels %d, upd_channels %d, mux_size %d, mux_outbufs %d, mux_flush_count %d, '
            'size_to_edge %d, paused_to_edge_count %d, executed_read_count %d, executed_write_count %d, '
            'select_count %d, mux_not_ready_for_read_count %d, mux_not_ready_for_write_count %d\n'
            % (handlers, dns_channels, udp_channels, fullness, outbufs,
               too_full_flush_count, mux_wrapper_buffer_size,
               paused_to_the_edge_count, executed_read_count,
               executed_write_count, select_count,
               mux_not_ready_for_read_count, mux_not_ready_for_write_count))

        p = struct.pack('!ccHHHHHHLLLLLLL', b('M'), b('M'), handlers,
                        dns_channels, udp_channels, outbufs,
                        too_full_flush_count, paused_to_the_edge_count,
                        fullness, mux_wrapper_buffer_size, executed_read_count,
                        executed_write_count, select_count,
                        mux_not_ready_for_read_count,
                        mux_not_ready_for_write_count)

        mux.send(0, ssnet.CMD_METRICS, p)
Example #3
0
 def send(self, channel, cmd, data):
     assert isinstance(data, binary_type)
     assert len(data) <= 65535
     p = struct.pack('!ccHHH', b('S'), b('S'), channel, cmd, len(data)) \
         + data
     if self.outbuf and (len(data) + HDR_LEN) <= (BUFFER_SIZE - len(self.outbuf[-1])):
         self.outbuf[-1] = self.outbuf[-1] + p
     else:
         self.outbuf.append(p)
     debug2(' > channel=%d cmd=%s len=%d outbuf=%d (fullness=%d)\n'
            % (channel, cmd_to_name.get(cmd, hex(cmd)),
               len(data), len(self.outbuf[-1]), self.fullness))
     self.fullness += len(data)
Example #4
0
 def hostwatch_ready(sock):
     assert(hw.pid)
     content = hw.sock.recv(4096)
     if content:
         lines = (hw.leftover + content).split(b('\n'))
         if lines[-1]:
             # no terminating newline: entry isn't complete yet!
             hw.leftover = lines.pop()
             lines.append(b(''))
         else:
             hw.leftover = b('')
         mux.send(0, ssnet.CMD_HOST_LIST, b('\n').join(lines))
     else:
         raise Fatal('hostwatch process died')
Example #5
0
 def hostwatch_ready(sock):
     assert (hw.pid)
     content = hw.sock.recv(4096)
     if content:
         lines = (hw.leftover + content).split(b('\n'))
         if lines[-1]:
             # no terminating newline: entry isn't complete yet!
             hw.leftover = lines.pop()
             lines.append(b(''))
         else:
             hw.leftover = b('')
         mux.send(0, ssnet.CMD_HOST_LIST, b('\n').join(lines))
     else:
         raise Fatal('hostwatch process died')
Example #6
0
 def __init__(self, rsock, wsock):
     Handler.__init__(self, [rsock, wsock])
     self.rsock = rsock
     self.wsock = wsock
     self.new_channel = self.got_dns_req = self.got_routes = None
     self.got_udp_open = self.got_udp_data = self.got_udp_close = None
     self.got_host_req = self.got_host_list = None
     self.channels = {}
     self.chani = 0
     self.want = 0
     self.inbuf = b('')
     self.outbuf = []
     self.fullness = 0
     self.too_full = False
     self.send(0, CMD_PING, b('chicken'))
Example #7
0
 def __init__(self, rsock, wsock):
     Handler.__init__(self, [rsock, wsock])
     self.rsock = rsock
     self.wsock = wsock
     self.new_channel = self.got_dns_req = self.got_routes = None
     self.got_udp_open = self.got_udp_data = self.got_udp_close = None
     self.got_host_req = self.got_host_list = None
     self.channels = {}
     self.chani = 0
     self.want = 0
     self.inbuf = b('')
     self.outbuf = []
     self.fullness = 0
     self.too_full = False
     self.send(0, CMD_PING, b('chicken'))
Example #8
0
 def fill(self):
     if self.buf:
         return
     rb = self.uread()
     if rb:
         self.buf.append(rb)
     if rb == b(''):  # empty string means EOF; None means temporarily empty
         self.noread()
Example #9
0
 def fill(self):
     if self.buf:
         return
     rb = self.uread()
     if rb:
         self.buf.append(rb)
     if rb == b(''):  # empty string means EOF; None means temporarily empty
         self.noread()
Example #10
0
 def handle(self):
     self.fill()
     # log('inbuf is: (%d,%d) %r\n'
     #     % (self.want, len(self.inbuf), self.inbuf))
     while 1:
         if len(self.inbuf) >= (self.want or HDR_LEN):
             (s1, s2, channel, cmd, datalen) = \
                 struct.unpack('!ccHHH', self.inbuf[:HDR_LEN])
             assert(s1 == b('S'))
             assert(s2 == b('S'))
             self.want = datalen + HDR_LEN
         if self.want and len(self.inbuf) >= self.want:
             data = self.inbuf[HDR_LEN:self.want]
             self.inbuf = self.inbuf[self.want:]
             self.want = 0
             self.got_packet(channel, cmd, data)
         else:
             break
Example #11
0
 def handle(self):
     self.fill()
     # log('inbuf is: (%d,%d) %r\n'
     #     % (self.want, len(self.inbuf), self.inbuf))
     while 1:
         if len(self.inbuf) >= (self.want or HDR_LEN):
             (s1, s2, channel, cmd, datalen) = \
                 struct.unpack('!ccHHH', self.inbuf[:HDR_LEN])
             assert(s1 == b('S'))
             assert(s2 == b('S'))
             self.want = datalen + HDR_LEN
         if self.want and len(self.inbuf) >= self.want:
             data = self.inbuf[HDR_LEN:self.want]
             self.inbuf = self.inbuf[self.want:]
             self.want = 0
             self.got_packet(channel, cmd, data)
         else:
             break
Example #12
0
 def callback(self, sock):
     try:
         data, peer = sock.recvfrom(4096)
     except socket.error:
         _, e = sys.exc_info()[:2]
         log('UDP recv from %r port %d: %s\n' % (peer[0], peer[1], e))
         return
     debug2('UDP response: %d bytes\n' % len(data))
     hdr = b("%s,%r," % (peer[0], peer[1]))
     self.mux.send(self.chan, ssnet.CMD_UDP_DATA, hdr + data)
Example #13
0
 def callback(self, sock):
     try:
         data, peer = sock.recvfrom(4096)
     except socket.error:
         _, e = sys.exc_info()[:2]
         log('UDP recv from %r port %d: %s\n' % (peer[0], peer[1], e))
         return
     debug2('UDP response: %d bytes\n' % len(data))
     hdr = b("%s,%r," % (peer[0], peer[1]))
     self.mux.send(self.chan, ssnet.CMD_UDP_DATA, hdr + data)
Example #14
0
 def fill(self):
     self.rsock.setblocking(False)
     try:
         read = _nb_clean(os.read, self.rsock.fileno(), 32768)
     except OSError:
         _, e = sys.exc_info()[:2]
         raise Fatal('other end: %r' % e)
     # log('<<< %r\n' % b)
     if read == b(''):  # EOF
         self.ok = False
     if read:
         self.inbuf += read
Example #15
0
 def uread(self):
     if self.connect_to:
         return None  # still connecting
     if self.shut_read:
         return
     self.rsock.setblocking(False)
     try:
         return _nb_clean(os.read, self.rsock.fileno(), 65536)
     except OSError:
         _, e = sys.exc_info()[:2]
         self.seterr('uread: %s' % e)
         return b('')  # unexpected error... we'll call it EOF
Example #16
0
 def uread(self):
     if self.connect_to:
         return None  # still connecting
     if self.shut_read:
         return
     self.rsock.setblocking(False)
     try:
         return _nb_clean(os.read, self.rsock.fileno(), 65536)
     except OSError:
         _, e = sys.exc_info()[:2]
         self.seterr('uread: %s' % e)
         return b('')  # unexpected error... we'll call it EOF
Example #17
0
 def fill(self):
     self.rsock.setblocking(False)
     try:
         read = _nb_clean(os.read, self.rsock.fileno(), LATENCY_BUFFER_SIZE)
     except OSError:
         _, e = sys.exc_info()[:2]
         raise Fatal('other end: %r' % e)
     # log('<<< %r\n' % b)
     if read == b(''):  # EOF
         self.ok = False
     if read:
         self.inbuf += read
Example #18
0
 def udp_req(channel, cmd, data):
     debug2('Incoming UDP request channel=%d, cmd=%d\n' % (channel, cmd))
     if cmd == ssnet.CMD_UDP_DATA:
         (dstip, dstport, data) = data.split(b(','), 2)
         dstport = int(dstport)
         debug2('is incoming UDP data. %r %d.\n' % (dstip, dstport))
         h = udphandlers[channel]
         h.send((dstip, dstport), data)
     elif cmd == ssnet.CMD_UDP_CLOSE:
         debug2('is incoming UDP close\n')
         h = udphandlers[channel]
         h.ok = False
         del mux.channels[channel]
Example #19
0
 def udp_req(channel, cmd, data):
     debug2('Incoming UDP request channel=%d, cmd=%d\n' % (channel, cmd))
     if cmd == ssnet.CMD_UDP_DATA:
         (dstip, dstport, data) = data.split(b(','), 2)
         dstport = int(dstport)
         debug2('is incoming UDP data. %r %d.\n' % (dstip, dstport))
         h = udphandlers[channel]
         h.send((dstip, dstport), data)
     elif cmd == ssnet.CMD_UDP_CLOSE:
         debug2('is incoming UDP close\n')
         h = udphandlers[channel]
         h.ok = False
         del mux.channels[channel]
Example #20
0
    def maybe_resume(self, wrote):
        self.buf_total = self.buf_total - wrote

        global _global_mux_wrapper_buffer_size
        _global_mux_wrapper_buffer_size -= wrote

        debug3(
            'Global mux wrap buf size: %d. Individual buf size: %d. On channel %s\n'
            % (_global_mux_wrapper_buffer_size, self.buf_total, self.channel))

        if self.isPaused and self.buf_total < INDIVIDUAL_BUFFER_RESUME_SIZE:
            self.mux.send(self.channel, CMD_RESUME, b(''))
            self.isPaused = False
            log('Global mux wrap buf size: %d. Individual buf size: %d (below threshold). Sent CMD_RESUME on channel %s\n'
                % (_global_mux_wrapper_buffer_size, self.buf_total,
                   self.channel))
Example #21
0
 def fill(self):
     try:
         os.set_blocking(self.rfile.fileno(), False)
     except AttributeError:
         # python < 3.5
         flags = fcntl.fcntl(self.rfile.fileno(), fcntl.F_GETFL)
         flags |= os.O_NONBLOCK
         flags = fcntl.fcntl(self.rfile.fileno(), fcntl.F_SETFL, flags)
     try:
         read = _nb_clean(os.read, self.rfile.fileno(), LATENCY_BUFFER_SIZE)
     except OSError:
         _, e = sys.exc_info()[:2]
         raise Fatal('other end: %r' % e)
     # log('<<< %r' % b)
     if read == b(''):  # EOF
         self.ok = False
     if read:
         self.inbuf += read
Example #22
0
    def maybe_pause(self, data):
        self.buf_total = self.buf_total + len(data)

        global _global_mux_wrapper_buffer_size
        _global_mux_wrapper_buffer_size += len(data)
        self.metrics.save_max_mux_wrapper_buffer_size(
            _global_mux_wrapper_buffer_size)

        debug3(
            'Global mux wrap buf size: %d. Individual buf size: %d. On channel %s\n'
            % (_global_mux_wrapper_buffer_size, self.buf_total, self.channel))

        if not self.isPaused and _global_mux_wrapper_buffer_size > PAUSE_TRAFFIC_TO_EDGE_THRESHOLD and self.buf_total\
                > INDIVIDUAL_BUFFER_PAUSE_SIZE:
            self.mux.send(self.channel, CMD_PAUSE, b(''))
            self.isPaused = True
            self.metrics.incr_paused_to_the_edge_count()
            log('Global mux wrap buf size: %d (above threshold). Individual buf size: %d (above threshold). Sent CMD_PAUSE on channel %s\n'
                % (_global_mux_wrapper_buffer_size, self.buf_total,
                   self.channel))
Example #23
0
 def fill(self):
     try:
         os.set_blocking(self.rfile.fileno(), False)
     except AttributeError:
         # python < 3.5
         flags = fcntl.fcntl(self.rfile.fileno(), fcntl.F_GETFL)
         flags |= os.O_NONBLOCK
         flags = fcntl.fcntl(self.rfile.fileno(), fcntl.F_SETFL, flags)
     try:
         # If LATENCY_BUFFER_SIZE is inappropriately large, we will
         # get a MemoryError here. Read no more than 1MiB.
         read = _nb_clean(os.read, self.rfile.fileno(),
                          min(1048576, LATENCY_BUFFER_SIZE))
     except OSError:
         _, e = sys.exc_info()[:2]
         raise Fatal('other end: %r' % e)
     # log('<<< %r' % b)
     if read == b(''):  # EOF
         self.ok = False
     if read:
         self.inbuf += read
Example #24
0
 def uread(self):
     if self.shut_read:
         return b('')  # EOF
     else:
         return None  # no data available right now
Example #25
0
 def nowrite(self):
     if not self.shut_write:
         self.mux.send(self.channel, CMD_TCP_EOF, b(''))
         self.setnowrite()
Example #26
0
 def noread(self):
     if not self.shut_read:
         self.mux.send(self.channel, CMD_TCP_STOP_SENDING, b(''))
         self.setnoread()
Example #27
0
 def noread(self):
     if not self.shut_read:
         debug2('%r: done reading\n' % self)
         self.shut_read = True
         self.mux.send(self.channel, CMD_TCP_STOP_SENDING, b(''))
         self.maybe_close()
Example #28
0
 def noread(self):
     if not self.shut_read:
         debug2('%r: done reading\n' % self)
         self.shut_read = True
         self.mux.send(self.channel, CMD_TCP_STOP_SENDING, b(''))
         self.maybe_close()
Example #29
0
 def nowrite(self):
     if not self.shut_write:
         self.mux.send(self.channel, CMD_TCP_EOF, b(''))
         self.setnowrite()
Example #30
0
def main(latency_control):
    debug1('Starting server with Python version %s\n'
           % platform.python_version())

    if helpers.verbose >= 1:
        helpers.logprefix = ' s: '
    else:
        helpers.logprefix = 'server: '
    debug1('latency control setting = %r\n' % latency_control)

    routes = list(list_routes())
    debug1('available routes:\n')
    for r in routes:
        debug1('  %d/%s/%d\n' % r)

    # synchronization header
    sys.stdout.write('\0\0SSHUTTLE0001')
    sys.stdout.flush()

    handlers = []
    mux = Mux(socket.fromfd(sys.stdin.fileno(),
                            socket.AF_INET, socket.SOCK_STREAM),
              socket.fromfd(sys.stdout.fileno(),
                            socket.AF_INET, socket.SOCK_STREAM))
    handlers.append(mux)
    routepkt = ''
    for r in routes:
        routepkt += '%d,%s,%d\n' % r
    mux.send(0, ssnet.CMD_ROUTES, b(routepkt))

    hw = Hostwatch()
    hw.leftover = b('')

    def hostwatch_ready(sock):
        assert(hw.pid)
        content = hw.sock.recv(4096)
        if content:
            lines = (hw.leftover + content).split(b('\n'))
            if lines[-1]:
                # no terminating newline: entry isn't complete yet!
                hw.leftover = lines.pop()
                lines.append(b(''))
            else:
                hw.leftover = b('')
            mux.send(0, ssnet.CMD_HOST_LIST, b('\n').join(lines))
        else:
            raise Fatal('hostwatch process died')

    def got_host_req(data):
        if not hw.pid:
            (hw.pid, hw.sock) = start_hostwatch(data.strip().split())
            handlers.append(Handler(socks=[hw.sock],
                                    callback=hostwatch_ready))
    mux.got_host_req = got_host_req

    def new_channel(channel, data):
        (family, dstip, dstport) = data.decode("ASCII").split(',', 2)
        family = int(family)
        dstport = int(dstport)
        outwrap = ssnet.connect_dst(family, dstip, dstport)
        handlers.append(Proxy(MuxWrapper(mux, channel), outwrap))
    mux.new_channel = new_channel

    dnshandlers = {}

    def dns_req(channel, data):
        debug2('Incoming DNS request channel=%d.\n' % channel)
        h = DnsProxy(mux, channel, data)
        handlers.append(h)
        dnshandlers[channel] = h
    mux.got_dns_req = dns_req

    udphandlers = {}

    def udp_req(channel, cmd, data):
        debug2('Incoming UDP request channel=%d, cmd=%d\n' % (channel, cmd))
        if cmd == ssnet.CMD_UDP_DATA:
            (dstip, dstport, data) = data.split(",", 2)
            dstport = int(dstport)
            debug2('is incoming UDP data. %r %d.\n' % (dstip, dstport))
            h = udphandlers[channel]
            h.send((dstip, dstport), data)
        elif cmd == ssnet.CMD_UDP_CLOSE:
            debug2('is incoming UDP close\n')
            h = udphandlers[channel]
            h.ok = False
            del mux.channels[channel]

    def udp_open(channel, data):
        debug2('Incoming UDP open.\n')
        family = int(data)
        mux.channels[channel] = lambda cmd, data: udp_req(channel, cmd, data)
        if channel in udphandlers:
            raise Fatal('UDP connection channel %d already open' % channel)
        else:
            h = UdpProxy(mux, channel, family)
            handlers.append(h)
            udphandlers[channel] = h
    mux.got_udp_open = udp_open

    while mux.ok:
        if hw.pid:
            assert(hw.pid > 0)
            (rpid, rv) = os.waitpid(hw.pid, os.WNOHANG)
            if rpid:
                raise Fatal(
                    'hostwatch exited unexpectedly: code 0x%04x\n' % rv)

        ssnet.runonce(handlers, mux)
        if latency_control:
            mux.check_fullness()

        if dnshandlers:
            now = time.time()
            remove = []
            for channel, h in dnshandlers.items():
                if h.timeout < now or not h.ok:
                    debug3('expiring dnsreqs channel=%d\n' % channel)
                    remove.append(channel)
                    h.ok = False
            for channel in remove:
                del dnshandlers[channel]
        if udphandlers:
            remove = []
            for channel, h in udphandlers.items():
                if not h.ok:
                    debug3('expiring UDP channel=%d\n' % channel)
                    remove.append(channel)
                    h.ok = False
            for channel in remove:
                del udphandlers[channel]
Example #31
0
 def check_fullness(self):
     if self.fullness > 32768:
         if not self.too_full:
             self.send(0, CMD_PING, b('rttest'))
         self.too_full = True
Example #32
0
 def check_fullness(self):
     if self.fullness > 32768:
         if not self.too_full:
             self.send(0, CMD_PING, b('rttest'))
         self.too_full = True
Example #33
0
 def nowrite(self):
     if not self.shut_write:
         debug2('%r: done writing\n' % self)
         self.shut_write = True
         self.mux.send(self.channel, CMD_TCP_EOF, b(''))
         self.maybe_close()
Example #34
0
 def noread(self):
     if not self.shut_read:
         self.mux.send(self.channel, CMD_TCP_STOP_SENDING, b(''))
         self.setnoread()
Example #35
0
def main(latency_control, auto_hosts):
    debug1('Starting server with Python version %s\n' %
           platform.python_version())

    if helpers.verbose >= 1:
        helpers.logprefix = ' s: '
    else:
        helpers.logprefix = 'server: '
    debug1('latency control setting = %r\n' % latency_control)

    routes = list(list_routes())
    debug1('available routes:\n')
    for r in routes:
        debug1('  %d/%s/%d\n' % r)

    # synchronization header
    sys.stdout.write('\0\0SSHUTTLE0001')
    sys.stdout.flush()

    handlers = []
    mux = Mux(
        socket.fromfd(sys.stdin.fileno(), socket.AF_INET, socket.SOCK_STREAM),
        socket.fromfd(sys.stdout.fileno(), socket.AF_INET, socket.SOCK_STREAM))
    handlers.append(mux)
    routepkt = ''
    for r in routes:
        routepkt += '%d,%s,%d\n' % r
    mux.send(0, ssnet.CMD_ROUTES, b(routepkt))

    hw = Hostwatch()
    hw.leftover = b('')

    def hostwatch_ready(sock):
        assert (hw.pid)
        content = hw.sock.recv(4096)
        if content:
            lines = (hw.leftover + content).split(b('\n'))
            if lines[-1]:
                # no terminating newline: entry isn't complete yet!
                hw.leftover = lines.pop()
                lines.append(b(''))
            else:
                hw.leftover = b('')
            mux.send(0, ssnet.CMD_HOST_LIST, b('\n').join(lines))
        else:
            raise Fatal('hostwatch process died')

    def got_host_req(data):
        if not hw.pid:
            (hw.pid, hw.sock) = start_hostwatch(data.strip().split(),
                                                auto_hosts)
            handlers.append(Handler(socks=[hw.sock], callback=hostwatch_ready))

    mux.got_host_req = got_host_req

    def new_channel(channel, data):
        (family, dstip, dstport) = data.decode("ASCII").split(',', 2)
        family = int(family)
        # AF_INET is the same constant on Linux and BSD but AF_INET6
        # is different. As the client and server can be running on
        # different platforms we can not just set the socket family
        # to what comes in the wire.
        if family != socket.AF_INET:
            family = socket.AF_INET6
        dstport = int(dstport)
        outwrap = ssnet.connect_dst(family, dstip, dstport)
        handlers.append(Proxy(MuxWrapper(mux, channel), outwrap))

    mux.new_channel = new_channel

    dnshandlers = {}

    def dns_req(channel, data):
        debug2('Incoming DNS request channel=%d.\n' % channel)
        h = DnsProxy(mux, channel, data)
        handlers.append(h)
        dnshandlers[channel] = h

    mux.got_dns_req = dns_req

    udphandlers = {}

    def udp_req(channel, cmd, data):
        debug2('Incoming UDP request channel=%d, cmd=%d\n' % (channel, cmd))
        if cmd == ssnet.CMD_UDP_DATA:
            (dstip, dstport, data) = data.split(b(','), 2)
            dstport = int(dstport)
            debug2('is incoming UDP data. %r %d.\n' % (dstip, dstport))
            h = udphandlers[channel]
            h.send((dstip, dstport), data)
        elif cmd == ssnet.CMD_UDP_CLOSE:
            debug2('is incoming UDP close\n')
            h = udphandlers[channel]
            h.ok = False
            del mux.channels[channel]

    def udp_open(channel, data):
        debug2('Incoming UDP open.\n')
        family = int(data)
        mux.channels[channel] = lambda cmd, data: udp_req(channel, cmd, data)
        if channel in udphandlers:
            raise Fatal('UDP connection channel %d already open' % channel)
        else:
            h = UdpProxy(mux, channel, family)
            handlers.append(h)
            udphandlers[channel] = h

    mux.got_udp_open = udp_open

    while mux.ok:
        if hw.pid:
            assert (hw.pid > 0)
            (rpid, rv) = os.waitpid(hw.pid, os.WNOHANG)
            if rpid:
                raise Fatal('hostwatch exited unexpectedly: code 0x%04x\n' %
                            rv)

        ssnet.runonce(handlers, mux)
        if latency_control:
            mux.check_fullness()

        if dnshandlers:
            now = time.time()
            remove = []
            for channel, h in dnshandlers.items():
                if h.timeout < now or not h.ok:
                    debug3('expiring dnsreqs channel=%d\n' % channel)
                    remove.append(channel)
                    h.ok = False
            for channel in remove:
                del dnshandlers[channel]
        if udphandlers:
            remove = []
            for channel, h in udphandlers.items():
                if not h.ok:
                    debug3('expiring UDP channel=%d\n' % channel)
                    remove.append(channel)
                    h.ok = False
            for channel in remove:
                del udphandlers[channel]
Example #36
0
 def check_fullness(self):
     if self.fullness > LATENCY_BUFFER_SIZE:
         if not self.too_full:
             self.send(0, CMD_PING, b('rttest'))
         self.too_full = True
Example #37
0
 def uread(self):
     if self.shut_read:
         return b('')  # EOF
     else:
         return None  # no data available right now
Example #38
0
 def nowrite(self):
     if not self.shut_write:
         debug2('%r: done writing\n' % self)
         self.shut_write = True
         self.mux.send(self.channel, CMD_TCP_EOF, b(''))
         self.maybe_close()