Python save Examples

Example #1

File: collect_i2c.py Project: Overtuner/pi-yacht-monitor

def readPCF8574_OUT_INV(config):
    logger.debug('--------------------')
    logger.debug('Now reading DigitalOut invers')
    address = int(config["address"],16)
    busnumber = int(config["bus"])
    logger.debug('Busnumber: %s', busnumber)
    logger.debug('Address: %s', address)
    bus = smbus.SMBus(busnumber)
    state = bus.read_byte(address);
    logger.debug('State dez: %s', state)
    logger.debug('State bin: %s', bin(state))

    for i in range(0,8):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_name = config[port + "name"]
            value = 1&(state>>(7-i))
            value = 0 if value==1 else 1
            try:
                givenvalue=int(config[port + "givenvalue"])
            except:
                givenvalue=value
            if value != givenvalue:
                value = writePCF8574_OUT_INV(config,i,givenvalue)
                time.sleep(0.1)
            storagehandler.save("boat." + in_name,value)

Example #2

File: collect_i2c.py Project: fwoell/pi-yacht-monitor

def readPCF8574_OUT_INV(config):
    logger.debug('--------------------')
    logger.debug('Now reading DigitalOut invers')
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    logger.debug('Busnumber: %s', busnumber)
    logger.debug('Address: %s', address)
    bus = smbus.SMBus(busnumber)
    state = bus.read_byte(address)
    logger.debug('State dez: %s', state)
    logger.debug('State bin: %s', bin(state))

    for i in range(0, 8):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_name = config[port + "name"]
            value = 1 & (state >> (7 - i))
            value = 0 if value == 1 else 1
            try:
                givenvalue = int(config[port + "givenvalue"])
            except:
                givenvalue = value
            if value != givenvalue:
                value = writePCF8574_OUT_INV(config, i, givenvalue)
                time.sleep(0.1)
            storagehandler.save("boat." + in_name, value)

Example #3

File: collect_i2c.py Project: Overtuner/pi-yacht-monitor

def readPCF8574_IN(config):
    logger.debug('--------------------')
    logger.debug('Now reading DigitalIn')
    address = int(config["address"],16)
    busnumber = int(config["bus"])
    bus = smbus.SMBus(busnumber)
    state = bus.read_byte(address)
    for i in range(0,8):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_name = config[port + "name"]
            value = 1&(state>>i)
            storagehandler.save("boat." + in_name,value)

Example #4

File: collect_i2c.py Project: fwoell/pi-yacht-monitor

def readPCF8574_IN(config):
    logger.debug('--------------------')
    logger.debug('Now reading DigitalIn')
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    bus = smbus.SMBus(busnumber)
    state = bus.read_byte(address)
    for i in range(0, 8):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_name = config[port + "name"]
            value = 1 & (state >> i)
            storagehandler.save("boat." + in_name, value)

Example #5

File: collect_i2c.py Project: Overtuner/pi-yacht-monitor

def readPCF8574_OUT(config):
    logger.debug('--------------------')
    logger.debug('Now reading DigitalOut')
    address = int(config["address"],16)
    busnumber = int(config["bus"])
    logger.debug('Busnumber: %s', busnumber)
    logger.debug('Address: %s', address)
    bus = smbus.SMBus(busnumber)
    state = bus.read_byte(address);
    logger.debug('State: %s', state)

    for i in range(0,8):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_name = config[port + "name"]
            value = 1&(state>>7-i)
            logger.debug('In_Name: %s', in_name)
            logger.debug('Value: %s', value)
            storagehandler.save("boat." + in_name,value)

Example #6

File: collect_i2c.py Project: fwoell/pi-yacht-monitor

def readPCF8574_OUT(config):
    logger.debug('--------------------')
    logger.debug('Now reading DigitalOut')
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    logger.debug('Busnumber: %s', busnumber)
    logger.debug('Address: %s', address)
    bus = smbus.SMBus(busnumber)
    state = bus.read_byte(address)
    logger.debug('State: %s', state)

    for i in range(0, 8):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_name = config[port + "name"]
            value = 1 & (state >> 7 - i)
            logger.debug('In_Name: %s', in_name)
            logger.debug('Value: %s', value)
            storagehandler.save("boat." + in_name, value)

Example #7

File: collect_i2c.py Project: Overtuner/pi-yacht-monitor

def readLM75(config):
    logger.debug('--------------------')
    logger.debug('Now reading LM75')
    address = int(config["address"],16)
    busnumber = int(config["bus"])
    name = config["name"]
    bus = smbus.SMBus(busnumber)
    logger.debug('Busnumber: %s', busnumber)
    logger.debug('Address: %s', address)
    logger.debug('Name: %s', name)
    raw_temp = bus.read_word_data(address, 0)
    logger.debug('Raw Temp: %s', raw_temp)
    vorkomma = raw_temp & 0xFF
    nachkomma = raw_temp >> 15
    temp = 0
    if (vorkomma & 0x80) != 0x80:
        temp = vorkomma + nachkomma * 0.5
    else:
        vorkomma = -((~vorkomma & 0xFF) + 1)
        temp = vorkomma + nachkomma * 0.5
    logger.debug('Temperatur: %s', temp)
    storagehandler.save("boat." + name,temp)

Example #8

File: collect_i2c.py Project: Overtuner/pi-yacht-monitor

def readPCF8591(config):
    address = int(config["address"],16)
    busnumber = int(config["bus"])
    bus = smbus.SMBus(busnumber)
    logger.debug('Now reading HorterAnalogIn')
    logger.debug('Busnumber: ')
    logger.debug('Address: ')

    for i in range(0,4):
        port = "in"+str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_factor = float(config[port + "factor"])
            in_name   = config[port + "name"]
            value = int("0x0" + str(i),16)
            bus.write_byte(address,value)
            time.sleep(0.2)
            bus.read_byte(address)
            time.sleep(0.2)
            voltage_raw = bus.read_byte(address)
            voltage = round(voltage_raw * in_factor,2)
            storagehandler.save("boat." + in_name,voltage)

Example #9

File: collect_i2c.py Project: fwoell/pi-yacht-monitor

def readLM75(config):
    logger.debug('--------------------')
    logger.debug('Now reading LM75')
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    name = config["name"]
    bus = smbus.SMBus(busnumber)
    logger.debug('Busnumber: %s', busnumber)
    logger.debug('Address: %s', address)
    logger.debug('Name: %s', name)
    raw_temp = bus.read_word_data(address, 0)
    logger.debug('Raw Temp: %s', raw_temp)
    vorkomma = raw_temp & 0xFF
    nachkomma = raw_temp >> 15
    temp = 0
    if (vorkomma & 0x80) != 0x80:
        temp = vorkomma + nachkomma * 0.5
    else:
        vorkomma = -((~vorkomma & 0xFF) + 1)
        temp = vorkomma + nachkomma * 0.5
    logger.debug('Temperatur: %s', temp)
    storagehandler.save("boat." + name, temp)

Example #10

File: collect_i2c.py Project: fwoell/pi-yacht-monitor

def readPCF8591(config):
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    bus = smbus.SMBus(busnumber)
    logger.debug('Now reading HorterAnalogIn')
    logger.debug('Busnumber: ')
    logger.debug('Address: ')

    for i in range(0, 4):
        port = "in" + str(i) + "-"
        in_active = config[port + "active"]
        if in_active == "1":
            in_factor = float(config[port + "factor"])
            in_name = config[port + "name"]
            value = int("0x0" + str(i), 16)
            bus.write_byte(address, value)
            time.sleep(0.2)
            bus.read_byte(address)
            time.sleep(0.2)
            voltage_raw = bus.read_byte(address)
            voltage = round(voltage_raw * in_factor, 2)
            storagehandler.save("boat." + in_name, voltage)

Example #11

File: collect_i2c.py Project: fwoell/pi-yacht-monitor

def readHORTER_PIC18F13K22_AD(config):
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    bus = smbus.SMBus(busnumber)
    data = bus.read_i2c_block_data(address, 0, 11)
    pointer = data[0]
    raw0 = data[1] + data[2] * 256
    raw1 = data[3] + data[4] * 256
    raw2 = data[5] + data[6] * 256
    raw3 = data[7] + data[8] * 256
    raw4 = data[9] + data[10] * 256
    if config["in0-active"] == "1":
        in_factor = float(config["in0-factor"])
        in_name = config["in0-name"]
        voltage = round(raw0 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in1-active"] == "1":
        in_factor = float(config["in1-factor"])
        in_name = config["in1-name"]
        voltage = round(raw1 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in2-active"] == "1":
        in_factor = float(config["in2-factor"])
        in_name = config["in2-name"]
        voltage = round(raw2 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in3-active"] == "1":
        in_factor = float(config["in3-factor"])
        in_name = config["in3-name"]
        voltage = round(raw3 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in4-active"] == "1":
        in_factor = float(config["in4-factor"])
        in_name = config["in4-name"]
        voltage = round(raw4 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)

Example #12

File: collect_i2c.py Project: pi-yacht-monitor/pi-yacht-monitor

def readHORTER_PIC18F13K22_AD(config):
    address = int(config["address"], 16)
    busnumber = int(config["bus"])
    bus = smbus.SMBus(busnumber)
    data = bus.read_i2c_block_data(address, 0, 11)
    pointer = data[0]
    raw0 = data[1] + data[2] * 256
    raw1 = data[3] + data[4] * 256
    raw2 = data[5] + data[6] * 256
    raw3 = data[7] + data[8] * 256
    raw4 = data[9] + data[10] * 256
    if config["in0-active"] == "1":
        in_factor = float(config["in0-factor"])
        in_name = config["in0-name"]
        voltage = round(raw0 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in1-active"] == "1":
        in_factor = float(config["in1-factor"])
        in_name = config["in1-name"]
        voltage = round(raw1 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in2-active"] == "1":
        in_factor = float(config["in2-factor"])
        in_name = config["in2-name"]
        voltage = round(raw2 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in3-active"] == "1":
        in_factor = float(config["in3-factor"])
        in_name = config["in3-name"]
        voltage = round(raw3 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)
    if config["in4-active"] == "1":
        in_factor = float(config["in4-factor"])
        in_name = config["in4-name"]
        voltage = round(raw4 * in_factor, 2)
        storagehandler.save("boat." + in_name, voltage)