Python PureUGen Examples

Example #1

 def __init__(self, calculation_rate=None, delay_time=0.2, maximum_delay_time=0.2, source=None):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         delay_time=delay_time,
         maximum_delay_time=maximum_delay_time,
         source=source,
     )

Example #2

File: Delay1.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     source=None,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         source=source,
     )

Example #3

 def __init__(
     self,
     calculation_rate=None,
     frequency=440.,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         )

Example #4

File: Saw.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     frequency=440.,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
     )

Example #5

 def __init__(
     self,
     source=None,
     calculation_rate=None,
     ):
     PureUGen.__init__(
         self,
         source=source,
         calculation_rate=calculation_rate,
         )

Example #6

File: SinOscFB.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     feedback=0,
     frequency=440,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         feedback=feedback,
         frequency=frequency,
     )

Example #7

File: Select.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     array=None,
     which=None,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         array=array,
         which=which,
         )

Example #8

File: SinOscFB.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     feedback=0,
     frequency=440,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         feedback=feedback,
         frequency=frequency,
         )

Example #9

File: SyncSaw.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     saw_frequency=440,
     sync_frequency=440,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         saw_frequency=saw_frequency,
         sync_frequency=sync_frequency,
         )

Example #10

 def __init__(
     self,
     calculation_rate=None,
     buffer_id=None,
     source=None,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         buffer_id=buffer_id,
         source=source,
         )

Example #11

 def __init__(
     self,
     calculation_rate=None,
     frequency=440.,
     initial_phase=0.,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         initial_phase=initial_phase,
         )

Example #12

File: Select.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     array=None,
     which=None,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         array=array,
         which=which,
     )

Example #13

 def __init__(
     self,
     calculation_rate=None,
     frequency=440.,
     initial_phase=0.,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         initial_phase=initial_phase,
     )

Example #14

 def __init__(
     self,
     calculation_rate=None,
     frequency=440,
     initial_phase=0,
     width=0.5,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         initial_phase=initial_phase,
         width=width,
         )

Example #15

File: DelayN.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     delay_time=0.2,
     maximum_delay_time=0.2,
     source=None,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         delay_time=delay_time,
         maximum_delay_time=maximum_delay_time,
         source=source,
         )

Example #16

 def __init__(
     self,
     calculation_rate=None,
     bwfrequency=880,
     formfrequency=1760,
     fundfrequency=440,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         bwfrequency=bwfrequency,
         formfrequency=formfrequency,
         fundfrequency=fundfrequency,
     )

Example #17

 def __init__(
     self,
     calculation_rate=None,
     beats=0.5,
     buffer_id=None,
     frequency=440,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         beats=beats,
         buffer_id=buffer_id,
         frequency=frequency,
     )

Example #18

 def __init__(
     self,
     calculation_rate=None,
     buffer_id=None,
     octave=12,
     source=None,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         buffer_id=buffer_id,
         octave=octave,
         source=source,
     )

Example #19

 def __init__(
     self,
     calculation_rate=None,
     exp=0.3333,
     frequency=None,
     root=None,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         exp=exp,
         frequency=frequency,
         root=root,
         )

Example #20

 def __init__(
     self,
     calculation_rate=None,
     buffer_id=None,
     frequency=440,
     phase=0,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         buffer_id=buffer_id,
         frequency=frequency,
         phase=phase,
     )

Example #21

File: VOsc.py Project: digideskio/supriya

 def __init__(
     self,
     calculation_rate=None,
     bufpos=None,
     frequency=440,
     phase=0,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         bufpos=bufpos,
         frequency=frequency,
         phase=phase,
         )

Example #22

File: COsc.py Project: digideskio/supriya

 def __init__(
     self,
     calculation_rate=None,
     beats=0.5,
     buffer_id=None,
     frequency=440,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         beats=beats,
         buffer_id=buffer_id,
         frequency=frequency,
         )

Example #23

File: LFPulse.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     frequency=440,
     initial_phase=0,
     width=0.5,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         initial_phase=initial_phase,
         width=width,
     )

Example #24

File: Formant.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     bwfrequency=880,
     formfrequency=1760,
     fundfrequency=440,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         bwfrequency=bwfrequency,
         formfrequency=formfrequency,
         fundfrequency=fundfrequency,
         )

Example #25

File: VOsc3.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     buffer_id=None,
     freq_1=110,
     freq_2=220,
     freq_3=440,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         buffer_id=buffer_id,
         freq_1=freq_1,
         freq_2=freq_2,
         freq_3=freq_3,
         )

Example #26

 def __init__(
     self,
     calculation_rate=None,
     frequency=1000,
     min_amp=0.32,
     root=0,
     root_amp=1,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         min_amp=min_amp,
         root=root,
         root_amp=root_amp,
     )

Example #27

File: AmpCompA.py Project: digideskio/supriya

 def __init__(
     self,
     calculation_rate=None,
     frequency=1000,
     min_amp=0.32,
     root=0,
     root_amp=1,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         frequency=frequency,
         min_amp=min_amp,
         root=root,
         root_amp=root_amp,
         )

Example #28

File: BufDelayN.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     buffer_id=None,
     calculation_rate=None,
     delay_time=0.2,
     maximum_delay_time=0.2,
     source=None,
     ):
     PureUGen.__init__(
         self,
         buffer_id=int(buffer_id),
         calculation_rate=calculation_rate,
         delay_time=delay_time,
         maximum_delay_time=maximum_delay_time,
         source=source,
         )

Example #29

File: VOsc3.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     bufpos=None,
     freq_1=110,
     freq_2=220,
     freq_3=440,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         bufpos=bufpos,
         freq_1=freq_1,
         freq_2=freq_2,
         freq_3=freq_3,
         )

Example #30

File: LinExp.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     input_maximum=1,
     input_minimum=0,
     output_maximum=2,
     output_minimum=1,
     source=None,
     ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         input_maximum=input_maximum,
         input_minimum=input_minimum,
         output_maximum=output_maximum,
         output_minimum=output_minimum,
         source=source,
         )

Example #31

File: LinExp.py Project: lisongx/supriya

 def __init__(
     self,
     calculation_rate=None,
     input_maximum=1,
     input_minimum=0,
     output_maximum=2,
     output_minimum=1,
     source=None,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         input_maximum=input_maximum,
         input_minimum=input_minimum,
         output_maximum=output_maximum,
         output_minimum=output_minimum,
         source=source,
     )

Example #32

 def __init__(
     self,
     buffer_id=None,
     calculation_rate=None,
     decay_time=1.0,
     delay_time=0.2,
     maximum_delay_time=0.2,
     source=None,
 ):
     PureUGen.__init__(
         self,
         buffer_id=int(buffer_id),
         calculation_rate=calculation_rate,
         decay_time=decay_time,
         delay_time=delay_time,
         maximum_delay_time=maximum_delay_time,
         source=source,
     )

Example #33

 def __init__(
     self,
     calculation_rate=None,
     delay=0,
     depth=0.02,
     depth_variation=0.1,
     frequency=440,
     initial_phase=0,
     onset=0,
     rate=6,
     rate_variation=0.04,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         delay=delay,
         depth=depth,
         depth_variation=depth_variation,
         frequency=frequency,
         initial_phase=initial_phase,
         onset=onset,
         rate=rate,
         rate_variation=rate_variation,
     )

Example #34

File: Vibrato.py Project: andrewyoung1991/supriya

 def __init__(
     self,
     calculation_rate=None,
     delay=0,
     depth=0.02,
     depth_variation=0.1,
     frequency=440,
     initial_phase=0,
     onset=0,
     rate=6,
     rate_variation=0.04,
 ):
     PureUGen.__init__(
         self,
         calculation_rate=calculation_rate,
         delay=delay,
         depth=depth,
         depth_variation=depth_variation,
         frequency=frequency,
         initial_phase=initial_phase,
         onset=onset,
         rate=rate,
         rate_variation=rate_variation,
     )

Example #35

 def __init__(self, calculation_rate=None, buffer_id=None, frequency=440, phase=0):
     PureUGen.__init__(
         self, calculation_rate=calculation_rate, buffer_id=buffer_id, frequency=frequency, phase=phase
     )