def test_preorder_traversal():
expr = Basic(b21, b3)
assert list(preorder_traversal(expr)) == [expr, b21, b2, b1, b1, b3, b2, b1]
assert list(preorder_traversal(("abc", ("d", "ef")))) == [("abc", ("d", "ef")), "abc", ("d", "ef"), "d", "ef"]
result = []
pt = preorder_traversal(expr)
for i in pt:
result.append(i)
if i == b2:
pt.skip()
assert result == [expr, b21, b2, b1, b3, b2]
w, x, y, z = symbols("w:z")
expr = z + w * (x + y)
assert list(preorder_traversal([expr], key=default_sort_key)) == [
[w * (x + y) + z],
w * (x + y) + z,
z,
w * (x + y),
w,
x + y,
x,
y,
]
def test_preorder_traversal():
expr = Basic(b21, b3)
assert list(preorder_traversal(expr)) == [expr, b21, b2, b1, b1, b3, b2, b1]
assert list(preorder_traversal(('abc', ('d', 'ef')))) == [
('abc', ('d', 'ef')), 'abc', ('d', 'ef'), 'd', 'ef']
result = []
pt = preorder_traversal(expr)
for i in pt:
result.append(i)
if i == b2:
pt.skip()
assert result == [expr, b21, b2, b1, b3, b2]
def amount_of_integrals(self):
count = 0
for exp in preorder_traversal(self.sympy_expr):
expression = Expression(exp)
if expression.is_integral():
count += 1
return count
def unitary_transformation(U,
O,
N=None,
collect_operators=None,
independent=False,
expansion_search=True):
"""
Perform a unitary transformation
O = U O U^\dagger
Where U is of the form U = exp(A)
and automatically try to identify series expansions in the resulting
operator expression.
"""
if not isinstance(U, exp):
raise ValueError("U must be a unitary operator on the form U = exp(A)")
A = U.exp
if debug: print("unitary_transformation: using A = ", A)
ops = list(
set([e for e in preorder_traversal(O) if isinstance(e, Operator)]))
if debug: print("ops: ", ops)
subs = {
op: bch_special_closed_form(A, op, independent=independent)
for op in ops
}
if debug:
print("\n".join(["sub {}: {}".format(o, s) for o, s in subs.items()]))
return O.subs(subs, simultaneous=True)
def integrals_solving_possibilities(self) -> List['Expression']:
integrals = []
for exp in preorder_traversal(self.sympy_expr):
exp = Expression(exp)
if exp.is_integral():
integrals.append(exp)
possibilities = []
for integral in integrals:
applied_integral = integral.apply_integral()
# without integral constant
integral_solved = self.get_copy()
integral_solved.replace(integral, applied_integral)
possibilities.append(integral_solved)
# with integral constant
integral_solved = self.get_copy()
integral_solved.replace(integral, applied_integral)
c = sympy.symbols('c')
expression_with_constant = Expression(
sympy.Add(integral_solved.sympy_expr, c))
possibilities.append(expression_with_constant)
return possibilities
def contains_key_var(term):
from sympy.core import basic
for sub in basic.preorder_traversal(term):
if sub in func.round_keys:
return True
else:
return False
def test_preorder_traversal():
expr = Basic(b21, b3)
assert list(preorder_traversal(expr)) == [expr, b21, b2, b1, b1, b3, b2, b1]
assert list(preorder_traversal(('abc', ('d', 'ef')))) == [
('abc', ('d', 'ef')), 'abc', ('d', 'ef'), 'd', 'ef']
result = []
pt = preorder_traversal(expr)
for i in pt:
result.append(i)
if i == b2:
pt.skip()
assert result == [expr, b21, b2, b1, b3, b2]
w, x, y, z = symbols('w:z')
expr = z + w*(x+y)
assert list(preorder_traversal([expr], key=default_sort_key)) == \
[[w*(x + y) + z], w*(x + y) + z, z, w*(x + y), w, x + y, x, y]
def solve_derivatives(self) -> 'Expression':
derivatives_solved = self.get_copy()
for exp in preorder_traversal(self.sympy_expr):
# TODO
exp = Expression(exp)
if exp.is_derivative():
derivative_applied = exp.apply_derivative()
derivatives_solved.replace(exp, derivative_applied)
return derivatives_solved
def sub_post(e):
""" Replace Neg(x) with -x.
"""
replacements = []
for node in preorder_traversal(e):
if isinstance(node, Mul) and node.args[:2] is (S.One, S.NegativeOne):
replacements.append((node, -node))
for node, replacement in replacements:
e = e.xreplace({node: replacement})
return e
def test_preorder_traversal():
expr = Basic(b21, b3)
assert list(
preorder_traversal(expr)) == [expr, b21, b2, b1, b1, b3, b2, b1]
assert list(preorder_traversal(
('abc', ('d', 'ef')))) == [('abc', ('d', 'ef')), 'abc', ('d', 'ef'),
'd', 'ef']
result = []
pt = preorder_traversal(expr)
for i in pt:
result.append(i)
if i == b2:
pt.skip()
assert result == [expr, b21, b2, b1, b3, b2]
w, x, y, z = symbols('w:z')
expr = z + w * (x + y)
assert list(preorder_traversal([expr], key=default_sort_key)) == \
[[w*(x + y) + z], w*(x + y) + z, z, w*(x + y), w, x + y, x, y]
def sub_post(e):
""" Replace Neg(x) with -x.
"""
replacements = []
for node in preorder_traversal(e):
if isinstance(node, Neg):
replacements.append((node, -node.args[0]))
for node, replacement in replacements:
e = e.xreplace({node: replacement})
return e
def sub_post(e):
""" Replace Neg(x) with -x.
"""
replacements = []
for node in preorder_traversal(e):
if isinstance(node, Neg):
replacements.append((node, -node.args[0]))
for node, replacement in replacements:
e = e.xreplace({node: replacement})
return e
def sub_post(e):
""" Replace 1*-1*x with -x.
"""
replacements = []
for node in preorder_traversal(e):
if isinstance(node, Mul) and \
node.args[0] is S.One and node.args[1] is S.NegativeOne:
replacements.append((node, -Mul._from_args(node.args[2:])))
for node, replacement in replacements:
e = e.xreplace({node: replacement})
return e
def sub_post(e):
""" Replace 1*-1*x with -x.
"""
replacements = []
for node in preorder_traversal(e):
if isinstance(node, Mul) and \
node.args[0] is S.One and node.args[1] is S.NegativeOne:
replacements.append((node, -Mul._from_args(node.args[2:])))
for node, replacement in replacements:
e = e.xreplace({node: replacement})
return e
def test_preorder_traversal():
expr = Basic(b21, b3)
assert list(
preorder_traversal(expr)) == [expr, b21, b2, b1, b1, b3, b2, b1]
assert list(preorder_traversal(("abc", ("d", "ef")))) == [
("abc", ("d", "ef")),
"abc",
("d", "ef"),
"d",
"ef",
]
result = []
pt = preorder_traversal(expr)
for i in pt:
result.append(i)
if i == b2:
pt.skip()
assert result == [expr, b21, b2, b1, b3, b2]
w, x, y, z = symbols("w:z")
expr = z + w * (x + y)
assert list(preorder_traversal([expr], keys=default_sort_key)) == [
[w * (x + y) + z],
w * (x + y) + z,
z,
w * (x + y),
w,
x + y,
x,
y,
]
assert list(preorder_traversal((x + y) * z, keys=True)) == [
z * (x + y),
z,
x + y,
x,
y,
]
def replace_derivatives_for_json(self):
replacements = []
for exp in preorder_traversal(self.sympy_expr):
# TODO
expression = Expression(exp)
if expression.is_derivative():
content = Expression(exp.args[0]).to_latex()
variable = Expression(exp.args[1][0]).to_latex()
replacement = '\\frac{d(%s)}{d%s}' % (content, variable)
replacements.append({
"derivative": expression.to_latex(),
"replacement": replacement
})
return replacements
def atoms(self, *types):
"""Returns the atoms that form the current object.
Similar to SymPy atoms() method, but this method
doesn't throw an exception when one of the arguments
is of type 'int'.
"""
if types:
types = tuple(
[t if isinstance(t, type) else type(t) for t in types])
nodes = basic.preorder_traversal(self)
if types:
result = {node for node in nodes if isinstance(node, types)}
else:
result = {node for node in nodes if not isinstance(node, int) and not node.args}
return result
def derivatives_solving_possibilities(self) -> List['Expression']:
derivatives = []
for exp in preorder_traversal(self.sympy_expr):
exp = Expression(exp)
if exp.is_derivative():
derivatives.append(exp)
possibilities = []
for derivative in derivatives:
derivative_solved = self.get_copy()
derivative_solved.replace(derivative,
derivative.apply_derivative())
possibilities.append(derivative_solved)
return possibilities
def combsimp(expr):
r"""
Simplify combinatorial expressions.
Explanation
===========
This function takes as input an expression containing factorials,
binomials, Pochhammer symbol and other "combinatorial" functions,
and tries to minimize the number of those functions and reduce
the size of their arguments.
The algorithm works by rewriting all combinatorial functions as
gamma functions and applying gammasimp() except simplification
steps that may make an integer argument non-integer. See docstring
of gammasimp for more information.
Then it rewrites expression in terms of factorials and binomials by
rewriting gammas as factorials and converting (a+b)!/a!b! into
binomials.
If expression has gamma functions or combinatorial functions
with non-integer argument, it is automatically passed to gammasimp.
Examples
========
>>> from sympy.simplify import combsimp
>>> from sympy import factorial, binomial, symbols
>>> n, k = symbols('n k', integer = True)
>>> combsimp(factorial(n)/factorial(n - 3))
n*(n - 2)*(n - 1)
>>> combsimp(binomial(n+1, k+1)/binomial(n, k))
(n + 1)/(k + 1)
"""
expr = expr.rewrite(gamma, piecewise=False)
if any(
isinstance(node, gamma) and not node.args[0].is_integer
for node in preorder_traversal(expr)):
return gammasimp(expr)
expr = _gammasimp(expr, as_comb=True)
expr = _gamma_as_comb(expr)
return expr
def is_subexpression(self, t):
"""Return True if the term is contained in the given expression.
>>> from arxpy.bitvector.core import Constant, Variable
>>> t = Constant(1, 4) + Variable("v", 4)
>>> Variable("v", 4).is_subexpression(t)
True
>>> Constant(2, 4).is_subexpression(t)
False
"""
assert isinstance(t, Term)
for sub in basic.preorder_traversal(t):
if self == sub:
return True
else:
return False
def combsimp(expr):
r"""
Simplify combinatorial expressions.
This function takes as input an expression containing factorials,
binomials, Pochhammer symbol and other "combinatorial" functions,
and tries to minimize the number of those functions and reduce
the size of their arguments.
The algorithm works by rewriting all combinatorial functions as
gamma functions and applying gammasimp() except simplification
steps that may make an integer argument non-integer. See docstring
of gammasimp for more information.
Then it rewrites expression in terms of factorials and binomials by
rewriting gammas as factorials and converting (a+b)!/a!b! into
binomials.
If expression has gamma functions or combinatorial functions
with non-integer argument, it is automatically passed to gammasimp.
Examples
========
>>> from sympy.simplify import combsimp
>>> from sympy import factorial, binomial, symbols
>>> n, k = symbols('n k', integer = True)
>>> combsimp(factorial(n)/factorial(n - 3))
n*(n - 2)*(n - 1)
>>> combsimp(binomial(n+1, k+1)/binomial(n, k))
(n + 1)/(k + 1)
"""
expr = expr.rewrite(gamma)
if any(isinstance(node, gamma) and not node.args[0].is_integer
for node in preorder_traversal(expr)):
return gammasimp(expr);
expr = _gammasimp(expr, as_comb = True)
expr = _gamma_as_comb(expr)
return expr
def _sympy_dict_to_profile(self, pd):
"""Given a sympy dictionary indicating solutions to indifference equations, return a support structure."""
#The probabilities in the profile here might be a number or an expression
profile = [{} for ii in range(self.player_count)]
for elm in pd.keys():
name = str(elm)
pieces = name.split('_')
player = int(pieces[1])
action = int(pieces[2])
profile[player][action] = pd[elm]
# The profile also must include self-referntial values for symbolic probabilities e.g
# if sympy says player 0 has an action profile of 0: 1 - p_0_1 the we must also include in his action dict a value 1: p_0_1
for elm in pd.values():
if isinstance(elm, Expr):
for arg in preorder_traversal(elm):
if isinstance(arg, Symbol):
name = str(arg)
pieces = name.split('_')
player = int(pieces[1])
action = int(pieces[2])
profile[player][action] = arg
return profile
def differentiate_finite(expr, *symbols,
# points=1, x0=None, wrt=None, evaluate=True, #Py2:
**kwargs):
r""" Differentiate expr and replace Derivatives with finite differences.
Parameters
==========
expr : expression
\*symbols : differentiate with respect to symbols
points: sequence, coefficient or undefined function, optional
see ``Derivative.as_finite_difference``
x0: number or Symbol, optional
see ``Derivative.as_finite_difference``
wrt: Symbol, optional
see ``Derivative.as_finite_difference``
Examples
========
>>> from sympy import sin, Function, differentiate_finite
>>> from sympy.abc import x, y, h
>>> f, g = Function('f'), Function('g')
>>> differentiate_finite(f(x)*g(x), x, points=[x-h, x+h])
-f(-h + x)*g(-h + x)/(2*h) + f(h + x)*g(h + x)/(2*h)
``differentiate_finite`` works on any expression, including the expressions
with embedded derivatives:
>>> differentiate_finite(f(x) + sin(x), x, 2)
-2*f(x) + f(x - 1) + f(x + 1) - 2*sin(x) + sin(x - 1) + sin(x + 1)
>>> differentiate_finite(f(x, y), x, y)
f(x - 1/2, y - 1/2) - f(x - 1/2, y + 1/2) - f(x + 1/2, y - 1/2) + f(x + 1/2, y + 1/2)
>>> differentiate_finite(f(x)*g(x).diff(x), x)
(-g(x) + g(x + 1))*f(x + 1/2) - (g(x) - g(x - 1))*f(x - 1/2)
To make finite difference with non-constant discretization step use
undefined functions:
>>> dx = Function('dx')
>>> differentiate_finite(f(x)*g(x).diff(x), points=dx(x))
-(-g(x - dx(x)/2 - dx(x - dx(x)/2)/2)/dx(x - dx(x)/2) +
g(x - dx(x)/2 + dx(x - dx(x)/2)/2)/dx(x - dx(x)/2))*f(x - dx(x)/2)/dx(x) +
(-g(x + dx(x)/2 - dx(x + dx(x)/2)/2)/dx(x + dx(x)/2) +
g(x + dx(x)/2 + dx(x + dx(x)/2)/2)/dx(x + dx(x)/2))*f(x + dx(x)/2)/dx(x)
"""
# Key-word only arguments only available in Python 3
points = kwargs.pop('points', 1)
x0 = kwargs.pop('x0', None)
wrt = kwargs.pop('wrt', None)
evaluate = kwargs.pop('evaluate', False)
if any(term.is_Derivative for term in list(preorder_traversal(expr))):
evaluate = False
if kwargs:
raise ValueError("Unknown kwargs: %s" % kwargs)
Dexpr = expr.diff(*symbols, evaluate=evaluate)
if evaluate:
SymPyDeprecationWarning(feature="``evaluate`` flag",
issue=17881,
deprecated_since_version="1.5").warn()
return Dexpr.replace(
lambda arg: arg.is_Derivative,
lambda arg: arg.as_finite_difference(points=points, x0=x0, wrt=wrt))
else:
DFexpr = Dexpr.as_finite_difference(points=points, x0=x0, wrt=wrt)
return DFexpr.replace(
lambda arg: isinstance(arg, Subs),
lambda arg: arg.expr.as_finite_difference(
points=points, x0=arg.point[0], wrt=arg.variables[0]))
def minimal_polynomial(ex, x=None, **args):
"""
Computes the minimal polynomial of an algebraic number.
Parameters
==========
ex : algebraic number expression
x : indipendent variable of the minimal polynomial
Options
=======
compose : if ``True`` _minpoly1`` is used, else the ``groebner`` algorithm
polys : if ``True`` returns a ``Poly`` object
Notes
=====
By default ``compose=True``, the minimal polynomial of the subexpressions of ``ex``
are computed, then the arithmetic operations on them are performed using the resultant
and factorization.
If ``compose=False``, a bottom-up algorithm is used with ``groebner``.
The default algorithm stalls less frequently.
Examples
========
>>> from sympy import minimal_polynomial, sqrt, solve
>>> from sympy.abc import x
>>> minimal_polynomial(sqrt(2), x)
x**2 - 2
>>> minimal_polynomial(sqrt(2) + sqrt(3), x)
x**4 - 10*x**2 + 1
>>> minimal_polynomial(solve(x**3 + x + 3)[0], x)
x**3 + x + 3
"""
from sympy.polys.polytools import degree
from sympy.core.function import expand_multinomial
from sympy.core.basic import preorder_traversal
compose = args.get('compose', True)
polys = args.get('polys', False)
ex = sympify(ex)
for expr in preorder_traversal(ex):
if expr.is_AlgebraicNumber:
compose = False
break
if ex.is_AlgebraicNumber:
compose = False
if x is not None:
x, cls = sympify(x), Poly
else:
x, cls = Dummy('x'), PurePoly
if compose:
result = _minpoly1(ex, x)
result = result.primitive()[1]
c = result.coeff(x**degree(result, x))
if c < 0:
result = expand_mul(-result)
c = -c
return cls(result, x, field=True) if polys else result
generator = numbered_symbols('a', cls=Dummy)
mapping, symbols, replace = {}, {}, []
def update_mapping(ex, exp, base=None):
a = generator.next()
symbols[ex] = a
if base is not None:
mapping[ex] = a**exp + base
else:
mapping[ex] = exp.as_expr(a)
return a
def bottom_up_scan(ex):
if ex.is_Atom:
if ex is S.ImaginaryUnit:
if ex not in mapping:
return update_mapping(ex, 2, 1)
else:
return symbols[ex]
elif ex.is_Rational:
return ex
elif ex.is_Add:
return Add(*[ bottom_up_scan(g) for g in ex.args ])
elif ex.is_Mul:
return Mul(*[ bottom_up_scan(g) for g in ex.args ])
elif ex.is_Pow:
if ex.exp.is_Rational:
if ex.exp < 0 and ex.base.is_Add:
coeff, terms = ex.base.as_coeff_add()
elt, _ = primitive_element(terms, polys=True)
alg = ex.base - coeff
# XXX: turn this into eval()
inverse = invert(elt.gen + coeff, elt).as_expr()
base = inverse.subs(elt.gen, alg).expand()
if ex.exp == -1:
return bottom_up_scan(base)
else:
ex = base**(-ex.exp)
if not ex.exp.is_Integer:
base, exp = (
ex.base**ex.exp.p).expand(), Rational(1, ex.exp.q)
else:
base, exp = ex.base, ex.exp
base = bottom_up_scan(base)
expr = base**exp
if expr not in mapping:
return update_mapping(expr, 1/exp, -base)
else:
return symbols[expr]
elif ex.is_AlgebraicNumber:
if ex.root not in mapping:
return update_mapping(ex.root, ex.minpoly)
else:
return symbols[ex.root]
raise NotAlgebraic("%s doesn't seem to be an algebraic number" % ex)
def simpler_inverse(ex):
"""
Returns True if it is more likely that the minimal polynomial
algorithm works better with the inverse
"""
if ex.is_Pow:
if (1/ex.exp).is_integer and ex.exp < 0:
if ex.base.is_Add:
return True
if ex.is_Mul:
hit = True
a = []
for p in ex.args:
if p.is_Add:
return False
if p.is_Pow:
if p.base.is_Add and p.exp > 0:
return False
if hit:
return True
return False
inverted = False
ex = expand_multinomial(ex)
if ex.is_AlgebraicNumber:
if not polys:
return ex.minpoly.as_expr(x)
else:
return ex.minpoly.replace(x)
elif ex.is_Rational:
result = ex.q*x - ex.p
else:
inverted = simpler_inverse(ex)
if inverted:
ex = ex**-1
res = None
if ex.is_Pow and (1/ex.exp).is_Integer:
n = 1/ex.exp
res = _minimal_polynomial_sq(ex.base, n, x)
elif _is_sum_surds(ex):
res = _minimal_polynomial_sq(ex, S.One, x)
if res is not None:
result = res
if res is None:
bus = bottom_up_scan(ex)
F = [x - bus] + mapping.values()
G = groebner(F, symbols.values() + [x], order='lex')
_, factors = factor_list(G[-1])
# by construction G[-1] has root `ex`
result = _choose_factor(factors, x, ex)
if inverted:
result = _invertx(result, x)
if result.coeff(x**degree(result, x)) < 0:
result = expand_mul(-result)
if polys:
return cls(result, x, field=True)
else:
return result
def _mask_nc(eq, name=None):
"""
Return ``eq`` with non-commutative objects replaced with Dummy
symbols. A dictionary that can be used to restore the original
values is returned: if it is None, the expression is noncommutative
and cannot be made commutative. The third value returned is a list
of any non-commutative symbols that appear in the returned equation.
``name``, if given, is the name that will be used with numbered Dummy
variables that will replace the non-commutative objects and is mainly
used for doctesting purposes.
Notes
=====
All non-commutative objects other than Symbols are replaced with
a non-commutative Symbol. Identical objects will be identified
by identical symbols.
If there is only 1 non-commutative object in an expression it will
be replaced with a commutative symbol. Otherwise, the non-commutative
entities are retained and the calling routine should handle
replacements in this case since some care must be taken to keep
track of the ordering of symbols when they occur within Muls.
Examples
========
>>> from sympy.physics.secondquant import Commutator, NO, F, Fd
>>> from sympy import symbols
>>> from sympy.core.exprtools import _mask_nc
>>> from sympy.abc import x, y
>>> A, B, C = symbols('A,B,C', commutative=False)
One nc-symbol:
>>> _mask_nc(A**2 - x**2, 'd')
(_d0**2 - x**2, {_d0: A}, [])
Multiple nc-symbols:
>>> _mask_nc(A**2 - B**2, 'd')
(A**2 - B**2, {}, [A, B])
An nc-object with nc-symbols but no others outside of it:
>>> _mask_nc(1 + x*Commutator(A, B), 'd')
(_d0*x + 1, {_d0: Commutator(A, B)}, [])
>>> _mask_nc(NO(Fd(x)*F(y)), 'd')
(_d0, {_d0: NO(CreateFermion(x)*AnnihilateFermion(y))}, [])
Multiple nc-objects:
>>> eq = x*Commutator(A, B) + x*Commutator(A, C)*Commutator(A, B)
>>> _mask_nc(eq, 'd')
(x*_d0 + x*_d1*_d0, {_d0: Commutator(A, B), _d1: Commutator(A, C)}, [_d0, _d1])
Multiple nc-objects and nc-symbols:
>>> eq = A*Commutator(A, B) + B*Commutator(A, C)
>>> _mask_nc(eq, 'd')
(A*_d0 + B*_d1, {_d0: Commutator(A, B), _d1: Commutator(A, C)}, [_d0, _d1, A, B])
"""
name = name or 'mask'
# Make Dummy() append sequential numbers to the name
def numbered_names():
i = 0
while True:
yield name + str(i)
i += 1
names = numbered_names()
def Dummy(*args, **kwargs):
from sympy import Dummy
return Dummy(next(names), *args, **kwargs)
expr = eq
if expr.is_commutative:
return eq, {}, []
# identify nc-objects; symbols and other
rep = []
nc_obj = set()
nc_syms = set()
pot = preorder_traversal(expr, keys=default_sort_key)
for i, a in enumerate(pot):
if any(a == r[0] for r in rep):
pot.skip()
elif not a.is_commutative:
if a.is_symbol:
nc_syms.add(a)
pot.skip()
elif not (a.is_Add or a.is_Mul or a.is_Pow):
nc_obj.add(a)
pot.skip()
# If there is only one nc symbol or object, it can be factored regularly
# but polys is going to complain, so replace it with a Dummy.
if len(nc_obj) == 1 and not nc_syms:
rep.append((nc_obj.pop(), Dummy()))
elif len(nc_syms) == 1 and not nc_obj:
rep.append((nc_syms.pop(), Dummy()))
# Any remaining nc-objects will be replaced with an nc-Dummy and
# identified as an nc-Symbol to watch out for
nc_obj = sorted(nc_obj, key=default_sort_key)
for n in nc_obj:
nc = Dummy(commutative=False)
rep.append((n, nc))
nc_syms.add(nc)
expr = expr.subs(rep)
nc_syms = list(nc_syms)
nc_syms.sort(key=default_sort_key)
return expr, {v: k for k, v in rep}, nc_syms
def minimal_polynomial(ex, x=None, **args):
"""
Computes the minimal polynomial of an algebraic element.
Parameters
==========
ex : algebraic element expression
x : independent variable of the minimal polynomial
Options
=======
compose : if ``True`` ``_minpoly_compose`` is used, if ``False`` the ``groebner`` algorithm
polys : if ``True`` returns a ``Poly`` object
domain : ground domain
Notes
=====
By default ``compose=True``, the minimal polynomial of the subexpressions of ``ex``
are computed, then the arithmetic operations on them are performed using the resultant
and factorization.
If ``compose=False``, a bottom-up algorithm is used with ``groebner``.
The default algorithm stalls less frequently.
If no ground domain is given, it will be generated automatically from the expression.
Examples
========
>>> from sympy import minimal_polynomial, sqrt, solve, QQ
>>> from sympy.abc import x, y
>>> minimal_polynomial(sqrt(2), x)
x**2 - 2
>>> minimal_polynomial(sqrt(2), x, domain=QQ.algebraic_field(sqrt(2)))
x - sqrt(2)
>>> minimal_polynomial(sqrt(2) + sqrt(3), x)
x**4 - 10*x**2 + 1
>>> minimal_polynomial(solve(x**3 + x + 3)[0], x)
x**3 + x + 3
>>> minimal_polynomial(sqrt(y), x)
x**2 - y
"""
from sympy.polys.polytools import degree
from sympy.polys.domains import FractionField
from sympy.core.basic import preorder_traversal
compose = args.get('compose', True)
polys = args.get('polys', False)
dom = args.get('domain', None)
ex = sympify(ex)
for expr in preorder_traversal(ex):
if expr.is_AlgebraicNumber:
compose = False
break
if x is not None:
x, cls = sympify(x), Poly
else:
x, cls = Dummy('x'), PurePoly
if not dom:
dom = FractionField(QQ, list(ex.free_symbols)) if ex.free_symbols else QQ
if hasattr(dom, 'symbols') and x in dom.symbols:
raise GeneratorsError("the variable %s is an element of the ground domain %s" % (x, dom))
if compose:
result = _minpoly_compose(ex, x, dom)
result = result.primitive()[1]
c = result.coeff(x**degree(result, x))
if c.is_negative:
result = expand_mul(-result)
return cls(result, x, field=True) if polys else result.collect(x)
if not dom.is_QQ:
raise NotImplementedError("groebner method only works for QQ")
result = _minpoly_groebner(ex, x, cls)
return cls(result, x, field=True) if polys else result.collect(x)
def apart(f, x=None, full=False, **options):
"""
Compute partial fraction decomposition of a rational function.
Given a rational function ``f`` compute partial fraction decomposition
of ``f``. Two algorithms are available: one is based on undetermined
coefficients method and the other is Bronstein's full partial fraction
decomposition algorithm.
Examples
========
>>> from sympy.polys.partfrac import apart
>>> from sympy.abc import x, y
By default, using the undetermined coefficients method:
>>> apart(y/(x + 2)/(x + 1), x)
-y/(x + 2) + y/(x + 1)
You can choose Bronstein's algorithm by setting ``full=True``:
>>> apart(y/(x**2 + x + 1), x)
y/(x**2 + x + 1)
>>> apart(y/(x**2 + x + 1), x, full=True)
RootSum(_w**2 + _w + 1, Lambda(_a, (-2*_a*y/3 - y/3)/(-_a + x)))
See Also
========
apart_list, assemble_partfrac_list
"""
allowed_flags(options, [])
f = sympify(f)
if f.is_Atom:
return f
else:
P, Q = f.as_numer_denom()
_options = options.copy()
options = set_defaults(options, extension=True)
try:
(P, Q), opt = parallel_poly_from_expr((P, Q), x, **options)
except PolynomialError as msg:
if f.is_commutative:
raise PolynomialError(msg)
# non-commutative
if f.is_Mul:
c, nc = f.args_cnc(split_1=False)
nc = f.func(*[apart(i, x=x, full=full, **_options) for i in nc])
if c:
c = apart(f.func._from_args(c), x=x, full=full, **_options)
return c*nc
else:
return nc
elif f.is_Add:
c = []
nc = []
for i in f.args:
if i.is_commutative:
c.append(i)
else:
try:
nc.append(apart(i, x=x, full=full, **_options))
except NotImplementedError:
nc.append(i)
return apart(f.func(*c), x=x, full=full, **_options) + f.func(*nc)
else:
reps = []
pot = preorder_traversal(f)
next(pot)
for e in pot:
try:
reps.append((e, apart(e, x=x, full=full, **_options)))
pot.skip() # this was handled successfully
except NotImplementedError:
pass
return f.xreplace(dict(reps))
if P.is_multivariate:
fc = f.cancel()
if fc != f:
return apart(fc, x=x, full=full, **_options)
raise NotImplementedError(
"multivariate partial fraction decomposition")
common, P, Q = P.cancel(Q)
poly, P = P.div(Q, auto=True)
P, Q = P.rat_clear_denoms(Q)
if Q.degree() <= 1:
partial = P/Q
else:
if not full:
partial = apart_undetermined_coeffs(P, Q)
else:
partial = apart_full_decomposition(P, Q)
terms = S.Zero
for term in Add.make_args(partial):
if term.has(RootSum):
terms += term
else:
terms += factor(term)
return common*(poly.as_expr() + terms)
def minimal_polynomial(ex, x=None, compose=True, polys=False, domain=None):
"""
Computes the minimal polynomial of an algebraic element.
Parameters
==========
ex : Expr
Element or expression whose minimal polynomial is to be calculated.
x : Symbol, optional
Independent variable of the minimal polynomial
compose : boolean, optional (default=True)
Method to use for computing minimal polynomial. If ``compose=True``
(default) then ``_minpoly_compose`` is used, if ``compose=False`` then
groebner bases are used.
polys : boolean, optional (default=False)
If ``True`` returns a ``Poly`` object else an ``Expr`` object.
domain : Domain, optional
Ground domain
Notes
=====
By default ``compose=True``, the minimal polynomial of the subexpressions of ``ex``
are computed, then the arithmetic operations on them are performed using the resultant
and factorization.
If ``compose=False``, a bottom-up algorithm is used with ``groebner``.
The default algorithm stalls less frequently.
If no ground domain is given, it will be generated automatically from the expression.
Examples
========
>>> from sympy import minimal_polynomial, sqrt, solve, QQ
>>> from sympy.abc import x, y
>>> minimal_polynomial(sqrt(2), x)
x**2 - 2
>>> minimal_polynomial(sqrt(2), x, domain=QQ.algebraic_field(sqrt(2)))
x - sqrt(2)
>>> minimal_polynomial(sqrt(2) + sqrt(3), x)
x**4 - 10*x**2 + 1
>>> minimal_polynomial(solve(x**3 + x + 3)[0], x)
x**3 + x + 3
>>> minimal_polynomial(sqrt(y), x)
x**2 - y
"""
from sympy.polys.polytools import degree
from sympy.polys.domains import FractionField
from sympy.core.basic import preorder_traversal
ex = sympify(ex)
if ex.is_number:
# not sure if it's always needed but try it for numbers (issue 8354)
ex = _mexpand(ex, recursive=True)
for expr in preorder_traversal(ex):
if expr.is_AlgebraicNumber:
compose = False
break
if x is not None:
x, cls = sympify(x), Poly
else:
x, cls = Dummy('x'), PurePoly
if not domain:
if ex.free_symbols:
domain = FractionField(QQ, list(ex.free_symbols))
else:
domain = QQ
if hasattr(domain, 'symbols') and x in domain.symbols:
raise GeneratorsError("the variable %s is an element of the ground "
"domain %s" % (x, domain))
if compose:
result = _minpoly_compose(ex, x, domain)
result = result.primitive()[1]
c = result.coeff(x**degree(result, x))
if c.is_negative:
result = expand_mul(-result)
return cls(result, x, field=True) if polys else result.collect(x)
if not domain.is_QQ:
raise NotImplementedError("groebner method only works for QQ")
result = _minpoly_groebner(ex, x, cls)
return cls(result, x, field=True) if polys else result.collect(x)
def minimal_polynomial(ex, x=None, compose=True, polys=False, domain=None):
"""
Computes the minimal polynomial of an algebraic element.
Parameters
==========
ex : Expr
Element or expression whose minimal polynomial is to be calculated.
x : Symbol, optional
Independent variable of the minimal polynomial
compose : boolean, optional (default=True)
Method to use for computing minimal polynomial. If ``compose=True``
(default) then ``_minpoly_compose`` is used, if ``compose=False`` then
groebner bases are used.
polys : boolean, optional (default=False)
If ``True`` returns a ``Poly`` object else an ``Expr`` object.
domain : Domain, optional
Ground domain
Notes
=====
By default ``compose=True``, the minimal polynomial of the subexpressions of ``ex``
are computed, then the arithmetic operations on them are performed using the resultant
and factorization.
If ``compose=False``, a bottom-up algorithm is used with ``groebner``.
The default algorithm stalls less frequently.
If no ground domain is given, it will be generated automatically from the expression.
Examples
========
>>> from sympy import minimal_polynomial, sqrt, solve, QQ
>>> from sympy.abc import x, y
>>> minimal_polynomial(sqrt(2), x)
x**2 - 2
>>> minimal_polynomial(sqrt(2), x, domain=QQ.algebraic_field(sqrt(2)))
x - sqrt(2)
>>> minimal_polynomial(sqrt(2) + sqrt(3), x)
x**4 - 10*x**2 + 1
>>> minimal_polynomial(solve(x**3 + x + 3)[0], x)
x**3 + x + 3
>>> minimal_polynomial(sqrt(y), x)
x**2 - y
"""
from sympy.polys.polytools import degree
from sympy.polys.domains import FractionField
from sympy.core.basic import preorder_traversal
ex = sympify(ex)
if ex.is_number:
# not sure if it's always needed but try it for numbers (issue 8354)
ex = _mexpand(ex, recursive=True)
for expr in preorder_traversal(ex):
if expr.is_AlgebraicNumber:
compose = False
break
if x is not None:
x, cls = sympify(x), Poly
else:
x, cls = Dummy('x'), PurePoly
if not domain:
if ex.free_symbols:
domain = FractionField(QQ, list(ex.free_symbols))
else:
domain = QQ
if hasattr(domain, 'symbols') and x in domain.symbols:
raise GeneratorsError("the variable %s is an element of the ground "
"domain %s" % (x, domain))
if compose:
result = _minpoly_compose(ex, x, domain)
result = result.primitive()[1]
c = result.coeff(x**degree(result, x))
if c.is_negative:
result = expand_mul(-result)
return cls(result, x, field=True) if polys else result.collect(x)
if not domain.is_QQ:
raise NotImplementedError("groebner method only works for QQ")
result = _minpoly_groebner(ex, x, cls)
return cls(result, x, field=True) if polys else result.collect(x)
def minimal_polynomial(ex, x=None, **args):
"""
Computes the minimal polynomial of an algebraic element.
Parameters
==========
ex : algebraic element expression
x : independent variable of the minimal polynomial
Options
=======
compose : if ``True`` ``_minpoly_compose`` is used, if ``False`` the ``groebner`` algorithm
polys : if ``True`` returns a ``Poly`` object
domain : ground domain
Notes
=====
By default ``compose=True``, the minimal polynomial of the subexpressions of ``ex``
are computed, then the arithmetic operations on them are performed using the resultant
and factorization.
If ``compose=False``, a bottom-up algorithm is used with ``groebner``.
The default algorithm stalls less frequently.
If no ground domain is given, it will be generated automatically from the expression.
Examples
========
>>> from sympy import minimal_polynomial, sqrt, solve, QQ
>>> from sympy.abc import x, y
>>> minimal_polynomial(sqrt(2), x)
x**2 - 2
>>> minimal_polynomial(sqrt(2), x, domain=QQ.algebraic_field(sqrt(2)))
x - sqrt(2)
>>> minimal_polynomial(sqrt(2) + sqrt(3), x)
x**4 - 10*x**2 + 1
>>> minimal_polynomial(solve(x**3 + x + 3)[0], x)
x**3 + x + 3
>>> minimal_polynomial(sqrt(y), x)
x**2 - y
"""
from sympy.polys.polytools import degree
from sympy.polys.domains import FractionField
from sympy.core.basic import preorder_traversal
compose = args.get('compose', True)
polys = args.get('polys', False)
dom = args.get('domain', None)
ex = sympify(ex)
for expr in preorder_traversal(ex):
if expr.is_AlgebraicNumber:
compose = False
break
if x is not None:
x, cls = sympify(x), Poly
else:
x, cls = Dummy('x'), PurePoly
if not dom:
dom = FractionField(QQ, list(
ex.free_symbols)) if ex.free_symbols else QQ
if hasattr(dom, 'symbols') and x in dom.symbols:
raise GeneratorsError(
"the variable %s is an element of the ground domain %s" % (x, dom))
if compose:
result = _minpoly_compose(ex, x, dom)
result = result.primitive()[1]
c = result.coeff(x**degree(result, x))
if c.is_negative:
result = expand_mul(-result)
return cls(result, x, field=True) if polys else result.collect(x)
if not dom.is_QQ:
raise NotImplementedError("groebner method only works for QQ")
result = _minpoly_groebner(ex, x, cls)
return cls(result, x, field=True) if polys else result.collect(x)
def cse(exprs, symbols=None, optimizations=None, postprocess=None):
""" Perform common subexpression elimination on an expression.
Parameters
==========
exprs : list of sympy expressions, or a single sympy expression
The expressions to reduce.
symbols : infinite iterator yielding unique Symbols
The symbols used to label the common subexpressions which are pulled
out. The ``numbered_symbols`` generator is useful. The default is a
stream of symbols of the form "x0", "x1", etc. This must be an infinite
iterator.
optimizations : list of (callable, callable) pairs, optional
The (preprocessor, postprocessor) pairs. If not provided,
``sympy.simplify.cse.cse_optimizations`` is used.
postprocess : a function which accepts the two return values of cse and
returns the desired form of output from cse, e.g. if you want the
replacements reversed the function might be the following lambda:
lambda r, e: return reversed(r), e
Returns
=======
replacements : list of (Symbol, expression) pairs
All of the common subexpressions that were replaced. Subexpressions
earlier in this list might show up in subexpressions later in this list.
reduced_exprs : list of sympy expressions
The reduced expressions with all of the replacements above.
"""
from sympy.matrices import Matrix
if symbols is None:
symbols = numbered_symbols()
else:
# In case we get passed an iterable with an __iter__ method instead of
# an actual iterator.
symbols = iter(symbols)
seen_subexp = set()
muls = set()
adds = set()
to_eliminate = set()
if optimizations is None:
# Pull out the default here just in case there are some weird
# manipulations of the module-level list in some other thread.
optimizations = list(cse_optimizations)
# Handle the case if just one expression was passed.
if isinstance(exprs, Basic):
exprs = [exprs]
# Preprocess the expressions to give us better optimization opportunities.
reduced_exprs = [preprocess_for_cse(e, optimizations) for e in exprs]
# Find all of the repeated subexpressions.
for expr in reduced_exprs:
if not isinstance(expr, Basic):
continue
pt = preorder_traversal(expr)
for subtree in pt:
inv = 1 / subtree if subtree.is_Pow else None
if subtree.is_Atom or iterable(subtree) or inv and inv.is_Atom:
# Exclude atoms, since there is no point in renaming them.
continue
if subtree in seen_subexp:
if inv and _coeff_isneg(subtree.exp):
# save the form with positive exponent
subtree = inv
to_eliminate.add(subtree)
pt.skip()
continue
if inv and inv in seen_subexp:
if _coeff_isneg(subtree.exp):
# save the form with positive exponent
subtree = inv
to_eliminate.add(subtree)
pt.skip()
continue
elif subtree.is_Mul:
muls.add(subtree)
elif subtree.is_Add:
adds.add(subtree)
seen_subexp.add(subtree)
# process adds - any adds that weren't repeated might contain
# subpatterns that are repeated, e.g. x+y+z and x+y have x+y in common
adds = [set(a.args) for a in ordered(adds)]
for i in xrange(len(adds)):
for j in xrange(i + 1, len(adds)):
com = adds[i].intersection(adds[j])
if len(com) > 1:
to_eliminate.add(Add(*com))
# remove this set of symbols so it doesn't appear again
adds[i] = adds[i].difference(com)
adds[j] = adds[j].difference(com)
for k in xrange(j + 1, len(adds)):
if not com.difference(adds[k]):
adds[k] = adds[k].difference(com)
# process muls - any muls that weren't repeated might contain
# subpatterns that are repeated, e.g. x*y*z and x*y have x*y in common
# use SequenceMatcher on the nc part to find the longest common expression
# in common between the two nc parts
sm = difflib.SequenceMatcher()
muls = [a.args_cnc(cset=True) for a in ordered(muls)]
for i in xrange(len(muls)):
if muls[i][1]:
sm.set_seq1(muls[i][1])
for j in xrange(i + 1, len(muls)):
# the commutative part in common
ccom = muls[i][0].intersection(muls[j][0])
# the non-commutative part in common
if muls[i][1] and muls[j][1]:
# see if there is any chance of an nc match
ncom = set(muls[i][1]).intersection(set(muls[j][1]))
if len(ccom) + len(ncom) < 2:
continue
# now work harder to find the match
sm.set_seq2(muls[j][1])
i1, _, n = sm.find_longest_match(0, len(muls[i][1]), 0,
len(muls[j][1]))
ncom = muls[i][1][i1:i1 + n]
else:
ncom = []
com = list(ccom) + ncom
if len(com) < 2:
continue
to_eliminate.add(Mul(*com))
# remove ccom from all if there was no ncom; to update the nc part
# would require finding the subexpr and then replacing it with a
# dummy to keep bounding nc symbols from being identified as a
# subexpr, e.g. removing B*C from A*B*C*D might allow A*D to be
# identified as a subexpr which would not be right.
if not ncom:
muls[i][0] = muls[i][0].difference(ccom)
for k in xrange(j, len(muls)):
if not ccom.difference(muls[k][0]):
muls[k][0] = muls[k][0].difference(ccom)
# make to_eliminate canonical; we will prefer non-Muls to Muls
# so select them first (non-Muls will have False for is_Mul and will
# be first in the ordering.
to_eliminate = list(ordered(to_eliminate, lambda _: _.is_Mul))
# Substitute symbols for all of the repeated subexpressions.
replacements = []
reduced_exprs = list(reduced_exprs)
hit = True
for i, subtree in enumerate(to_eliminate):
if hit:
sym = next(symbols)
hit = False
if subtree.is_Pow and subtree.exp.is_Rational:
update = lambda x: x.xreplace({subtree: sym, 1 / subtree: 1 / sym})
else:
update = lambda x: x.subs(subtree, sym)
# Make the substitution in all of the target expressions.
for j, expr in enumerate(reduced_exprs):
old = reduced_exprs[j]
reduced_exprs[j] = update(expr)
hit = hit or (old != reduced_exprs[j])
# Make the substitution in all of the subsequent substitutions.
for j in range(i + 1, len(to_eliminate)):
old = to_eliminate[j]
to_eliminate[j] = update(to_eliminate[j])
hit = hit or (old != to_eliminate[j])
if hit:
replacements.append((sym, subtree))
# Postprocess the expressions to return the expressions to canonical form.
for i, (sym, subtree) in enumerate(replacements):
subtree = postprocess_for_cse(subtree, optimizations)
replacements[i] = (sym, subtree)
reduced_exprs = [
postprocess_for_cse(e, optimizations) for e in reduced_exprs
]
# remove replacements that weren't used more than once
_remove_singletons(replacements, reduced_exprs)
if isinstance(exprs, Matrix):
reduced_exprs = [Matrix(exprs.rows, exprs.cols, reduced_exprs)]
if postprocess is None:
return replacements, reduced_exprs
return postprocess(replacements, reduced_exprs)
def minimal_polynomial(ex, x=None, **args):
"""
Computes the minimal polynomial of an algebraic number.
Parameters
==========
ex : algebraic number expression
x : indipendent variable of the minimal polynomial
Options
=======
compose : if ``True`` _minpoly1`` is used, else the ``groebner`` algorithm
polys : if ``True`` returns a ``Poly`` object
Notes
=====
By default ``compose=True``, the minimal polynomial of the subexpressions of ``ex``
are computed, then the arithmetic operations on them are performed using the resultant
and factorization.
If ``compose=False``, a bottom-up algorithm is used with ``groebner``.
The default algorithm stalls less frequently.
Examples
========
>>> from sympy import minimal_polynomial, sqrt, solve
>>> from sympy.abc import x
>>> minimal_polynomial(sqrt(2), x)
x**2 - 2
>>> minimal_polynomial(sqrt(2) + sqrt(3), x)
x**4 - 10*x**2 + 1
>>> minimal_polynomial(solve(x**3 + x + 3)[0], x)
x**3 + x + 3
"""
from sympy.polys.polytools import degree
from sympy.core.function import expand_multinomial
from sympy.core.basic import preorder_traversal
compose = args.get('compose', True)
polys = args.get('polys', False)
ex = sympify(ex)
for expr in preorder_traversal(ex):
if expr.is_AlgebraicNumber:
compose = False
break
if ex.is_AlgebraicNumber:
compose = False
if x is not None:
x, cls = sympify(x), Poly
else:
x, cls = Dummy('x'), PurePoly
if compose:
result = _minpoly1(ex, x)
result = result.primitive()[1]
c = result.coeff(x**degree(result, x))
if c < 0:
result = expand_mul(-result)
c = -c
return cls(result, x, field=True) if polys else result
generator = numbered_symbols('a', cls=Dummy)
mapping, symbols, replace = {}, {}, []
def update_mapping(ex, exp, base=None):
a = generator.next()
symbols[ex] = a
if base is not None:
mapping[ex] = a**exp + base
else:
mapping[ex] = exp.as_expr(a)
return a
def bottom_up_scan(ex):
if ex.is_Atom:
if ex is S.ImaginaryUnit:
if ex not in mapping:
return update_mapping(ex, 2, 1)
else:
return symbols[ex]
elif ex.is_Rational:
return ex
elif ex.is_Add:
return Add(*[bottom_up_scan(g) for g in ex.args])
elif ex.is_Mul:
return Mul(*[bottom_up_scan(g) for g in ex.args])
elif ex.is_Pow:
if ex.exp.is_Rational:
if ex.exp < 0 and ex.base.is_Add:
coeff, terms = ex.base.as_coeff_add()
elt, _ = primitive_element(terms, polys=True)
alg = ex.base - coeff
# XXX: turn this into eval()
inverse = invert(elt.gen + coeff, elt).as_expr()
base = inverse.subs(elt.gen, alg).expand()
if ex.exp == -1:
return bottom_up_scan(base)
else:
ex = base**(-ex.exp)
if not ex.exp.is_Integer:
base, exp = (ex.base**ex.exp.p).expand(), Rational(
1, ex.exp.q)
else:
base, exp = ex.base, ex.exp
base = bottom_up_scan(base)
expr = base**exp
if expr not in mapping:
return update_mapping(expr, 1 / exp, -base)
else:
return symbols[expr]
elif ex.is_AlgebraicNumber:
if ex.root not in mapping:
return update_mapping(ex.root, ex.minpoly)
else:
return symbols[ex.root]
raise NotAlgebraic("%s doesn't seem to be an algebraic number" % ex)
def simpler_inverse(ex):
"""
Returns True if it is more likely that the minimal polynomial
algorithm works better with the inverse
"""
if ex.is_Pow:
if (1 / ex.exp).is_integer and ex.exp < 0:
if ex.base.is_Add:
return True
if ex.is_Mul:
hit = True
a = []
for p in ex.args:
if p.is_Add:
return False
if p.is_Pow:
if p.base.is_Add and p.exp > 0:
return False
if hit:
return True
return False
inverted = False
ex = expand_multinomial(ex)
if ex.is_AlgebraicNumber:
if not polys:
return ex.minpoly.as_expr(x)
else:
return ex.minpoly.replace(x)
elif ex.is_Rational:
result = ex.q * x - ex.p
else:
inverted = simpler_inverse(ex)
if inverted:
ex = ex**-1
res = None
if ex.is_Pow and (1 / ex.exp).is_Integer:
n = 1 / ex.exp
res = _minimal_polynomial_sq(ex.base, n, x)
elif _is_sum_surds(ex):
res = _minimal_polynomial_sq(ex, S.One, x)
if res is not None:
result = res
if res is None:
bus = bottom_up_scan(ex)
F = [x - bus] + mapping.values()
G = groebner(F, symbols.values() + [x], order='lex')
_, factors = factor_list(G[-1])
# by construction G[-1] has root `ex`
result = _choose_factor(factors, x, ex)
if inverted:
result = _invertx(result, x)
if result.coeff(x**degree(result, x)) < 0:
result = expand_mul(-result)
if polys:
return cls(result, x, field=True)
else:
return result
def apart(f, x=None, full=False, **options):
"""
Compute partial fraction decomposition of a rational function.
Given a rational function ``f`` compute partial fraction decomposition
of ``f``. Two algorithms are available: one is based on undetermined
coefficients method and the other is Bronstein's full partial fraction
decomposition algorithm.
Examples
========
>>> from sympy.polys.partfrac import apart
>>> from sympy.abc import x, y
By default, using the undetermined coefficients method:
>>> apart(y/(x + 2)/(x + 1), x)
-y/(x + 2) + y/(x + 1)
You can choose Bronstein's algorithm by setting ``full=True``:
>>> apart(y/(x**2 + x + 1), x)
y/(x**2 + x + 1)
>>> apart(y/(x**2 + x + 1), x, full=True)
RootSum(_w**2 + _w + 1, Lambda(_a, (-2*_a*y/3 - y/3)/(-_a + x)))
See Also
========
apart_list, assemble_partfrac_list
"""
allowed_flags(options, [])
f = sympify(f)
if f.is_Atom:
return f
else:
P, Q = f.as_numer_denom()
_options = options.copy()
options = set_defaults(options, extension=True)
try:
(P, Q), opt = parallel_poly_from_expr((P, Q), x, **options)
except PolynomialError as msg:
if f.is_commutative:
raise PolynomialError(msg)
# non-commutative
if f.is_Mul:
c, nc = f.args_cnc(split_1=False)
nc = Mul(*[apart(i, x=x, full=full, **_options) for i in nc])
if c:
c = apart(Mul._from_args(c), x=x, full=full, **_options)
return c*nc
else:
return nc
elif f.is_Add:
c = []
nc = []
for i in f.args:
if i.is_commutative:
c.append(i)
else:
try:
nc.append(apart(i, x=x, full=full, **_options))
except NotImplementedError:
nc.append(i)
return apart(Add(*c), x=x, full=full, **_options) + Add(*nc)
else:
reps = []
pot = preorder_traversal(f)
pot.next()
for e in pot:
try:
reps.append((e, apart(e, x=x, full=full, **_options)))
pot.skip() # this was handled successfully
except NotImplementedError:
pass
return f.xreplace(dict(reps))
if P.is_multivariate:
fc = f.cancel()
if fc != f:
return apart(fc, x=x, full=full, **_options)
raise NotImplementedError(
"multivariate partial fraction decomposition")
common, P, Q = P.cancel(Q)
poly, P = P.div(Q, auto=True)
P, Q = P.rat_clear_denoms(Q)
if Q.degree() <= 1:
partial = P/Q
else:
if not full:
partial = apart_undetermined_coeffs(P, Q)
else:
partial = apart_full_decomposition(P, Q)
terms = S.Zero
for term in Add.make_args(partial):
if term.has(RootSum):
terms += term
else:
terms += factor(term)
return common*(poly.as_expr() + terms)
def _mask_nc(eq):
"""Return ``eq`` with non-commutative objects replaced with dummy
symbols. A dictionary that can be used to restore the original
values is returned: if it is None, the expression is
noncommutative and cannot be made commutative. The third value
returned is a list of any non-commutative symbols that appear
in the returned equation.
Notes
=====
All non-commutative objects other than Symbols are replaced with
a non-commutative Symbol. Identical objects will be identified
by identical symbols.
If there is only 1 non-commutative object in an expression it will
be replaced with a commutative symbol. Otherwise, the non-commutative
entities are retained and the calling routine should handle
replacements in this case since some care must be taken to keep
track of the ordering of symbols when they occur within Muls.
Examples
========
>>> from sympy.physics.secondquant import Commutator, NO, F, Fd
>>> from sympy import Dummy, symbols, Sum, Mul, Basic
>>> from sympy.abc import x, y
>>> from sympy.core.exprtools import _mask_nc
>>> A, B, C = symbols('A,B,C', commutative=False)
>>> Dummy._count = 0 # reset for doctest purposes
One nc-symbol:
>>> _mask_nc(A**2 - x**2)
(_0**2 - x**2, {_0: A}, [])
Multiple nc-symbols:
>>> _mask_nc(A**2 - B**2)
(A**2 - B**2, None, [A, B])
An nc-object with nc-symbols but no others outside of it:
>>> _mask_nc(1 + x*Commutator(A, B))
(_1*x + 1, {_1: Commutator(A, B)}, [])
>>> _mask_nc(NO(Fd(x)*F(y)))
(_2, {_2: NO(CreateFermion(x)*AnnihilateFermion(y))}, [])
Multiple nc-objects:
>>> eq = x*Commutator(A, B) + x*Commutator(A, C)*Commutator(A, B)
>>> _mask_nc(eq)
(x*_3 + x*_4*_3, {_3: Commutator(A, B), _4: Commutator(A, C)}, [_3, _4])
Multiple nc-objects and nc-symbols:
>>> eq = A*Commutator(A, B) + B*Commutator(A, C)
>>> _mask_nc(eq)
(A*_5 + B*_6, {_5: Commutator(A, B), _6: Commutator(A, C)}, [_5, _6, A, B])
If there is an object that:
- doesn't contain nc-symbols
- but has arguments which derive from Basic, not Expr
- and doesn't define an _eval_is_commutative routine
then it will give False (or None?) for the is_commutative test. Such
objects are also removed by this routine:
>>> from sympy import Basic, Mul
>>> eq = (1 + Mul(Basic(), Basic(), evaluate=False))
>>> eq.is_commutative
False
>>> _mask_nc(eq)
(_7**2 + 1, {_7: Basic()}, [])
"""
expr = eq
if expr.is_commutative:
return eq, {}, []
# identify nc-objects; symbols and other
rep = []
nc_obj = set()
nc_syms = set()
pot = preorder_traversal(expr, keys=default_sort_key)
for i, a in enumerate(pot):
if any(a == r[0] for r in rep):
pot.skip()
elif not a.is_commutative:
if a.is_Symbol:
nc_syms.add(a)
elif not (a.is_Add or a.is_Mul or a.is_Pow):
if all(s.is_commutative for s in a.free_symbols):
rep.append((a, Dummy()))
else:
nc_obj.add(a)
pot.skip()
# If there is only one nc symbol or object, it can be factored regularly
# but polys is going to complain, so replace it with a Dummy.
if len(nc_obj) == 1 and not nc_syms:
rep.append((nc_obj.pop(), Dummy()))
elif len(nc_syms) == 1 and not nc_obj:
rep.append((nc_syms.pop(), Dummy()))
# Any remaining nc-objects will be replaced with an nc-Dummy and
# identified as an nc-Symbol to watch out for
nc_obj = sorted(nc_obj, key=default_sort_key)
for n in nc_obj:
nc = Dummy(commutative=False)
rep.append((n, nc))
nc_syms.add(nc)
expr = expr.subs(rep)
nc_syms = list(nc_syms)
nc_syms.sort(key=default_sort_key)
return expr, dict([(v, k) for k, v in rep]) or None, nc_syms
def _mask_nc(eq, name=None):
"""
Return ``eq`` with non-commutative objects replaced with Dummy
symbols. A dictionary that can be used to restore the original
values is returned: if it is None, the expression is noncommutative
and cannot be made commutative. The third value returned is a list
of any non-commutative symbols that appear in the returned equation.
``name``, if given, is the name that will be used with numered Dummy
variables that will replace the non-commutative objects and is mainly
used for doctesting purposes.
Notes
=====
All non-commutative objects other than Symbols are replaced with
a non-commutative Symbol. Identical objects will be identified
by identical symbols.
If there is only 1 non-commutative object in an expression it will
be replaced with a commutative symbol. Otherwise, the non-commutative
entities are retained and the calling routine should handle
replacements in this case since some care must be taken to keep
track of the ordering of symbols when they occur within Muls.
Examples
========
>>> from sympy.physics.secondquant import Commutator, NO, F, Fd
>>> from sympy import symbols, Mul
>>> from sympy.core.exprtools import _mask_nc
>>> from sympy.abc import x, y
>>> A, B, C = symbols('A,B,C', commutative=False)
One nc-symbol:
>>> _mask_nc(A**2 - x**2, 'd')
(_d0**2 - x**2, {_d0: A}, [])
Multiple nc-symbols:
>>> _mask_nc(A**2 - B**2, 'd')
(A**2 - B**2, None, [A, B])
An nc-object with nc-symbols but no others outside of it:
>>> _mask_nc(1 + x*Commutator(A, B), 'd')
(_d0*x + 1, {_d0: Commutator(A, B)}, [])
>>> _mask_nc(NO(Fd(x)*F(y)), 'd')
(_d0, {_d0: NO(CreateFermion(x)*AnnihilateFermion(y))}, [])
Multiple nc-objects:
>>> eq = x*Commutator(A, B) + x*Commutator(A, C)*Commutator(A, B)
>>> _mask_nc(eq, 'd')
(x*_d0 + x*_d1*_d0, {_d0: Commutator(A, B), _d1: Commutator(A, C)}, [_d0, _d1])
Multiple nc-objects and nc-symbols:
>>> eq = A*Commutator(A, B) + B*Commutator(A, C)
>>> _mask_nc(eq, 'd')
(A*_d0 + B*_d1, {_d0: Commutator(A, B), _d1: Commutator(A, C)}, [_d0, _d1, A, B])
If there is an object that:
- doesn't contain nc-symbols
- but has arguments which derive from Basic, not Expr
- and doesn't define an _eval_is_commutative routine
then it will give False (or None?) for the is_commutative test. Such
objects are also removed by this routine:
>>> from sympy import Basic
>>> eq = (1 + Mul(Basic(), Basic(), evaluate=False))
>>> eq.is_commutative
False
>>> _mask_nc(eq, 'd')
(_d0**2 + 1, {_d0: Basic()}, [])
"""
name = name or 'mask'
# Make Dummy() append sequential numbers to the name
def numbered_names():
i = 0
while True:
yield name + str(i)
i += 1
names = numbered_names()
def Dummy(*args, **kwargs):
from sympy import Dummy
return Dummy(next(names), *args, **kwargs)
expr = eq
if expr.is_commutative:
return eq, {}, []
# identify nc-objects; symbols and other
rep = []
nc_obj = set()
nc_syms = set()
pot = preorder_traversal(expr, keys=default_sort_key)
for i, a in enumerate(pot):
if any(a == r[0] for r in rep):
pot.skip()
elif not a.is_commutative:
if a.is_Symbol:
nc_syms.add(a)
elif not (a.is_Add or a.is_Mul or a.is_Pow):
if all(s.is_commutative for s in a.free_symbols):
rep.append((a, Dummy()))
else:
nc_obj.add(a)
pot.skip()
# If there is only one nc symbol or object, it can be factored regularly
# but polys is going to complain, so replace it with a Dummy.
if len(nc_obj) == 1 and not nc_syms:
rep.append((nc_obj.pop(), Dummy()))
elif len(nc_syms) == 1 and not nc_obj:
rep.append((nc_syms.pop(), Dummy()))
# Any remaining nc-objects will be replaced with an nc-Dummy and
# identified as an nc-Symbol to watch out for
nc_obj = sorted(nc_obj, key=default_sort_key)
for n in nc_obj:
nc = Dummy(commutative=False)
rep.append((n, nc))
nc_syms.add(nc)
expr = expr.subs(rep)
nc_syms = list(nc_syms)
nc_syms.sort(key=default_sort_key)
return expr, {v: k for k, v in rep} or None, nc_syms
def cse(exprs, symbols=None, optimizations=None, postprocess=None):
""" Perform common subexpression elimination on an expression.
Parameters
==========
exprs : list of sympy expressions, or a single sympy expression
The expressions to reduce.
symbols : infinite iterator yielding unique Symbols
The symbols used to label the common subexpressions which are pulled
out. The ``numbered_symbols`` generator is useful. The default is a
stream of symbols of the form "x0", "x1", etc. This must be an infinite
iterator.
optimizations : list of (callable, callable) pairs, optional
The (preprocessor, postprocessor) pairs. If not provided,
``sympy.simplify.cse.cse_optimizations`` is used.
postprocess : a function which accepts the two return values of cse and
returns the desired form of output from cse, e.g. if you want the
replacements reversed the function might be the following lambda:
lambda r, e: return reversed(r), e
Returns
=======
replacements : list of (Symbol, expression) pairs
All of the common subexpressions that were replaced. Subexpressions
earlier in this list might show up in subexpressions later in this list.
reduced_exprs : list of sympy expressions
The reduced expressions with all of the replacements above.
"""
from sympy.matrices import Matrix
from sympy.simplify.simplify import fraction
if symbols is None:
symbols = numbered_symbols()
else:
# In case we get passed an iterable with an __iter__ method instead of
# an actual iterator.
symbols = iter(symbols)
seen_subexp = set()
muls = set()
adds = set()
to_eliminate = []
to_eliminate_ops_count = []
if optimizations is None:
# Pull out the default here just in case there are some weird
# manipulations of the module-level list in some other thread.
optimizations = list(cse_optimizations)
# Handle the case if just one expression was passed.
if isinstance(exprs, Basic):
exprs = [exprs]
# Preprocess the expressions to give us better optimization opportunities.
reduced_exprs = [preprocess_for_cse(e, optimizations) for e in exprs]
# Find all of the repeated subexpressions.
def insert(subtree):
'''This helper will insert the subtree into to_eliminate while
maintaining the ordering by op count and will skip the insertion
if subtree is already present.'''
ops_count = (subtree.count_ops(), subtree.is_Mul) # prefer non-Mul to Mul
index_to_insert = bisect.bisect(to_eliminate_ops_count, ops_count)
# all i up to this index have op count <= the current op count
# so check that subtree is not yet present from this index down
# (if necessary) to zero.
for i in xrange(index_to_insert - 1, -1, -1):
if to_eliminate_ops_count[i] == ops_count and \
subtree == to_eliminate[i]:
return # already have it
to_eliminate_ops_count.insert(index_to_insert, ops_count)
to_eliminate.insert(index_to_insert, subtree)
for expr in reduced_exprs:
if not isinstance(expr, Basic):
continue
pt = preorder_traversal(expr, key=default_sort_key)
for subtree in pt:
inv = 1/subtree if subtree.is_Pow else None
if subtree.is_Atom or iterable(subtree) or inv and inv.is_Atom:
# Exclude atoms, since there is no point in renaming them.
continue
if subtree in seen_subexp:
if inv and _coeff_isneg(subtree.exp):
# save the form with positive exponent
subtree = inv
insert(subtree)
pt.skip()
continue
if inv and inv in seen_subexp:
if _coeff_isneg(subtree.exp):
# save the form with positive exponent
subtree = inv
insert(subtree)
pt.skip()
continue
elif subtree.is_Mul:
muls.add(subtree)
elif subtree.is_Add:
adds.add(subtree)
seen_subexp.add(subtree)
# process adds - any adds that weren't repeated might contain
# subpatterns that are repeated, e.g. x+y+z and x+y have x+y in common
adds = [set(a.args) for a in adds]
for i in xrange(len(adds)):
for j in xrange(i + 1, len(adds)):
com = adds[i].intersection(adds[j])
if len(com) > 1:
insert(Add(*com))
# remove this set of symbols so it doesn't appear again
adds[i] = adds[i].difference(com)
adds[j] = adds[j].difference(com)
for k in xrange(j + 1, len(adds)):
if not com.difference(adds[k]):
adds[k] = adds[k].difference(com)
# process muls - any muls that weren't repeated might contain
# subpatterns that are repeated, e.g. x*y*z and x*y have x*y in common
# use SequenceMatcher on the nc part to find the longest common expression
# in common between the two nc parts
sm = difflib.SequenceMatcher()
muls = [a.args_cnc(cset=True) for a in muls]
for i in xrange(len(muls)):
if muls[i][1]:
sm.set_seq1(muls[i][1])
for j in xrange(i + 1, len(muls)):
# the commutative part in common
ccom = muls[i][0].intersection(muls[j][0])
# the non-commutative part in common
if muls[i][1] and muls[j][1]:
# see if there is any chance of an nc match
ncom = set(muls[i][1]).intersection(set(muls[j][1]))
if len(ccom) + len(ncom) < 2:
continue
# now work harder to find the match
sm.set_seq2(muls[j][1])
i1, _, n = sm.find_longest_match(0, len(muls[i][1]),
0, len(muls[j][1]))
ncom = muls[i][1][i1:i1 + n]
else:
ncom = []
com = list(ccom) + ncom
if len(com) < 2:
continue
insert(Mul(*com))
# remove ccom from all if there was no ncom; to update the nc part
# would require finding the subexpr and then replacing it with a
# dummy to keep bounding nc symbols from being identified as a
# subexpr, e.g. removing B*C from A*B*C*D might allow A*D to be
# identified as a subexpr which would not be right.
if not ncom:
muls[i][0] = muls[i][0].difference(ccom)
for k in xrange(j, len(muls)):
if not ccom.difference(muls[k][0]):
muls[k][0] = muls[k][0].difference(ccom)
# Substitute symbols for all of the repeated subexpressions.
replacements = []
reduced_exprs = list(reduced_exprs)
hit = True
for i, subtree in enumerate(to_eliminate):
if hit:
sym = symbols.next()
hit = False
if subtree.is_Pow and subtree.exp.is_Rational:
update = lambda x: x.xreplace({subtree: sym, 1/subtree: 1/sym})
else:
update = lambda x: x.subs(subtree, sym)
# Make the substitution in all of the target expressions.
for j, expr in enumerate(reduced_exprs):
old = reduced_exprs[j]
reduced_exprs[j] = update(expr)
hit = hit or (old != reduced_exprs[j])
# Make the substitution in all of the subsequent substitutions.
for j in range(i+1, len(to_eliminate)):
old = to_eliminate[j]
to_eliminate[j] = update(to_eliminate[j])
hit = hit or (old != to_eliminate[j])
if hit:
replacements.append((sym, subtree))
# Postprocess the expressions to return the expressions to canonical form.
for i, (sym, subtree) in enumerate(replacements):
subtree = postprocess_for_cse(subtree, optimizations)
replacements[i] = (sym, subtree)
reduced_exprs = [postprocess_for_cse(e, optimizations)
for e in reduced_exprs]
if isinstance(exprs, Matrix):
reduced_exprs = [Matrix(exprs.rows, exprs.cols, reduced_exprs)]
if postprocess is None:
return replacements, reduced_exprs
return postprocess(replacements, reduced_exprs)
def apart(f, x=None, full=False, **options):
"""
Compute partial fraction decomposition of a rational function.
Given a rational function ``f``, computes the partial fraction
decomposition of ``f``. Two algorithms are available: One is based on the
undertermined coefficients method, the other is Bronstein's full partial
fraction decomposition algorithm.
The undetermined coefficients method (selected by ``full=False``) uses
polynomial factorization (and therefore accepts the same options as
factor) for the denominator. Per default it works over the rational
numbers, therefore decomposition of denominators with non-rational roots
(e.g. irrational, complex roots) is not supported by default (see options
of factor).
Bronstein's algorithm can be selected by using ``full=True`` and allows a
decomposition of denominators with non-rational roots. A human-readable
result can be obtained via ``doit()`` (see examples below).
Examples
========
>>> from sympy.polys.partfrac import apart
>>> from sympy.abc import x, y
By default, using the undetermined coefficients method:
>>> apart(y/(x + 2)/(x + 1), x)
-y/(x + 2) + y/(x + 1)
The undetermined coefficients method does not provide a result when the
denominators roots are not rational:
>>> apart(y/(x**2 + x + 1), x)
y/(x**2 + x + 1)
You can choose Bronstein's algorithm by setting ``full=True``:
>>> apart(y/(x**2 + x + 1), x, full=True)
RootSum(_w**2 + _w + 1, Lambda(_a, (-2*_a*y/3 - y/3)/(-_a + x)))
Calling ``doit()`` yields a human-readable result:
>>> apart(y/(x**2 + x + 1), x, full=True).doit()
(-y/3 - 2*y*(-1/2 - sqrt(3)*I/2)/3)/(x + 1/2 + sqrt(3)*I/2) + (-y/3 -
2*y*(-1/2 + sqrt(3)*I/2)/3)/(x + 1/2 - sqrt(3)*I/2)
See Also
========
apart_list, assemble_partfrac_list
"""
allowed_flags(options, [])
f = sympify(f)
if f.is_Atom:
return f
else:
P, Q = f.as_numer_denom()
_options = options.copy()
options = set_defaults(options, extension=True)
try:
(P, Q), opt = parallel_poly_from_expr((P, Q), x, **options)
except PolynomialError as msg:
if f.is_commutative:
raise PolynomialError(msg)
# non-commutative
if f.is_Mul:
c, nc = f.args_cnc(split_1=False)
nc = f.func(*nc)
if c:
c = apart(f.func._from_args(c), x=x, full=full, **_options)
return c*nc
else:
return nc
elif f.is_Add:
c = []
nc = []
for i in f.args:
if i.is_commutative:
c.append(i)
else:
try:
nc.append(apart(i, x=x, full=full, **_options))
except NotImplementedError:
nc.append(i)
return apart(f.func(*c), x=x, full=full, **_options) + f.func(*nc)
else:
reps = []
pot = preorder_traversal(f)
next(pot)
for e in pot:
try:
reps.append((e, apart(e, x=x, full=full, **_options)))
pot.skip() # this was handled successfully
except NotImplementedError:
pass
return f.xreplace(dict(reps))
if P.is_multivariate:
fc = f.cancel()
if fc != f:
return apart(fc, x=x, full=full, **_options)
raise NotImplementedError(
"multivariate partial fraction decomposition")
common, P, Q = P.cancel(Q)
poly, P = P.div(Q, auto=True)
P, Q = P.rat_clear_denoms(Q)
if Q.degree() <= 1:
partial = P/Q
else:
if not full:
partial = apart_undetermined_coeffs(P, Q)
else:
partial = apart_full_decomposition(P, Q)
terms = S.Zero
for term in Add.make_args(partial):
if term.has(RootSum):
terms += term
else:
terms += factor(term)
return common*(poly.as_expr() + terms)
def apart(f, x=None, full=False, **options):
"""
Compute partial fraction decomposition of a rational function.
Given a rational function ``f`` compute partial fraction decomposition
of ``f``. Two algorithms are available: one is based on undetermined
coefficients method and the other is Bronstein's full partial fraction
decomposition algorithm.
Examples
========
>>> from sympy.polys.partfrac import apart
>>> from sympy.abc import x, y
By default, using the undetermined coefficients method:
>>> apart(y/(x + 2)/(x + 1), x)
-y/(x + 2) + y/(x + 1)
You can choose Bronstein's algorithm by setting ``full=True``:
>>> apart(y/(x**2 + x + 1), x)
y/(x**2 + x + 1)
>>> apart(y/(x**2 + x + 1), x, full=True)
RootSum(_w**2 + _w + 1, Lambda(_a, (-2*_a*y/3 - y/3)/(-_a + x)))
See Also
========
apart_list, assemble_partfrac_list
"""
allowed_flags(options, [])
f = sympify(f)
if f.is_Atom:
return f
else:
P, Q = f.as_numer_denom()
_options = options.copy()
options = set_defaults(options, extension=True)
try:
(P, Q), opt = parallel_poly_from_expr((P, Q), x, **options)
except PolynomialError, msg:
if f.is_commutative:
raise PolynomialError(msg)
# non-commutative
if f.is_Mul:
c, nc = f.args_cnc(split_1=False)
nc = Mul(*[apart(i, x=x, full=full, **_options) for i in nc])
if c:
c = apart(Mul._from_args(c), x=x, full=full, **_options)
return c*nc
else:
return nc
elif f.is_Add:
c = []
nc = []
for i in f.args:
if i.is_commutative:
c.append(i)
else:
try:
nc.append(apart(i, x=x, full=full, **_options))
except NotImplementedError:
nc.append(i)
return apart(Add(*c), x=x, full=full, **_options) + Add(*nc)
else:
reps = []
pot = preorder_traversal(f)
pot.next()
for e in pot:
try:
reps.append((e, apart(e, x=x, full=full, **_options)))
pot.skip() # this was handled successfully
except NotImplementedError:
pass
return f.xreplace(dict(reps))
def apart(f, x=None, full=False, **options):
"""
Compute partial fraction decomposition of a rational function.
Given a rational function ``f``, computes the partial fraction
decomposition of ``f``. Two algorithms are available: One is based on the
undertermined coefficients method, the other is Bronstein's full partial
fraction decomposition algorithm.
The undetermined coefficients method (selected by ``full=False``) uses
polynomial factorization (and therefore accepts the same options as
factor) for the denominator. Per default it works over the rational
numbers, therefore decomposition of denominators with non-rational roots
(e.g. irrational, complex roots) is not supported by default (see options
of factor).
Bronstein's algorithm can be selected by using ``full=True`` and allows a
decomposition of denominators with non-rational roots. A human-readable
result can be obtained via ``doit()`` (see examples below).
Examples
========
>>> from sympy.polys.partfrac import apart
>>> from sympy.abc import x, y
By default, using the undetermined coefficients method:
>>> apart(y/(x + 2)/(x + 1), x)
-y/(x + 2) + y/(x + 1)
The undetermined coefficients method does not provide a result when the
denominators roots are not rational:
>>> apart(y/(x**2 + x + 1), x)
y/(x**2 + x + 1)
You can choose Bronstein's algorithm by setting ``full=True``:
>>> apart(y/(x**2 + x + 1), x, full=True)
RootSum(_w**2 + _w + 1, Lambda(_a, (-2*_a*y/3 - y/3)/(-_a + x)))
Calling ``doit()`` yields a human-readable result:
>>> apart(y/(x**2 + x + 1), x, full=True).doit()
(-y/3 - 2*y*(-1/2 - sqrt(3)*I/2)/3)/(x + 1/2 + sqrt(3)*I/2) + (-y/3 -
2*y*(-1/2 + sqrt(3)*I/2)/3)/(x + 1/2 - sqrt(3)*I/2)
See Also
========
apart_list, assemble_partfrac_list
"""
allowed_flags(options, [])
f = sympify(f)
if f.is_Atom:
return f
else:
P, Q = f.as_numer_denom()
_options = options.copy()
options = set_defaults(options, extension=True)
try:
(P, Q), opt = parallel_poly_from_expr((P, Q), x, **options)
except PolynomialError as msg:
if f.is_commutative:
raise PolynomialError(msg)
# non-commutative
if f.is_Mul:
c, nc = f.args_cnc(split_1=False)
nc = f.func(*nc)
if c:
c = apart(f.func._from_args(c), x=x, full=full, **_options)
return c*nc
else:
return nc
elif f.is_Add:
c = []
nc = []
for i in f.args:
if i.is_commutative:
c.append(i)
else:
try:
nc.append(apart(i, x=x, full=full, **_options))
except NotImplementedError:
nc.append(i)
return apart(f.func(*c), x=x, full=full, **_options) + f.func(*nc)
else:
reps = []
pot = preorder_traversal(f)
next(pot)
for e in pot:
try:
reps.append((e, apart(e, x=x, full=full, **_options)))
pot.skip() # this was handled successfully
except NotImplementedError:
pass
return f.xreplace(dict(reps))
if P.is_multivariate:
fc = f.cancel()
if fc != f:
return apart(fc, x=x, full=full, **_options)
raise NotImplementedError(
"multivariate partial fraction decomposition")
common, P, Q = P.cancel(Q)
poly, P = P.div(Q, auto=True)
P, Q = P.rat_clear_denoms(Q)
if Q.degree() <= 1:
partial = P/Q
else:
if not full:
partial = apart_undetermined_coeffs(P, Q)
else:
partial = apart_full_decomposition(P, Q)
terms = S.Zero
for term in Add.make_args(partial):
if term.has(RootSum):
terms += term
else:
terms += factor(term)
return common*(poly.as_expr() + terms)
def contains_integral(self):
for exp in preorder_traversal(self.sympy_expr):
expression = Expression(exp)
if expression.is_integral():
return True
return False
