def random_integer_partition(n, seed=None):
"""
Generates a random integer partition summing to ``n`` as a list
of reverse-sorted integers.
Examples
========
>>> from sympy.combinatorics.partitions import random_integer_partition
For the following, a seed is given so a known value can be shown; in
practice, the seed would not be given.
>>> random_integer_partition(100, seed=[1, 1, 12, 1, 2, 1, 85, 1])
[85, 12, 2, 1]
>>> random_integer_partition(10, seed=[1, 2, 3, 1, 5, 1])
[5, 3, 1, 1]
>>> random_integer_partition(1)
[1]
"""
from sympy.utilities.randtest import _randint
n = as_int(n)
if n < 1:
raise ValueError('n must be a positive integer')
randint = _randint(seed)
partition = []
while (n > 0):
k = randint(1, n)
mult = randint(1, n//k)
partition.append((k, mult))
n -= k*mult
partition.sort(reverse=True)
partition = flatten([[k]*m for k, m in partition])
return partition
def random_integer_partition(n, seed=None):
"""
Generates a random integer partition summing to ``n`` as a list
of reverse-sorted integers.
Examples
========
>>> from sympy.combinatorics.partitions import random_integer_partition
For the following, a seed is given so a known value can be shown; in
practice, the seed would not be given.
>>> random_integer_partition(100, seed=[1, 1, 12, 1, 2, 1, 85, 1])
[85, 12, 2, 1]
>>> random_integer_partition(10, seed=[1, 2, 3, 1, 5, 1])
[5, 3, 1, 1]
>>> random_integer_partition(1)
[1]
"""
from sympy.utilities.randtest import _randint
n = as_int(n)
if n < 1:
raise ValueError('n must be a positive integer')
randint = _randint(seed)
partition = []
while (n > 0):
k = randint(1, n)
mult = randint(1, n // k)
partition.append((k, mult))
n -= k * mult
partition.sort(reverse=True)
partition = flatten([[k] * m for k, m in partition])
return partition
def dmp_zz_wang(f, u, K, mod=None, seed=None):
"""
Factor primitive square-free polynomials in `Z[X]`.
Given a multivariate polynomial `f` in `Z[x_1,...,x_n]`, which is
primitive and square-free in `x_1`, computes factorization of `f` into
irreducibles over integers.
The procedure is based on Wang's Enhanced Extended Zassenhaus
algorithm. The algorithm works by viewing `f` as a univariate polynomial
in `Z[x_2,...,x_n][x_1]`, for which an evaluation mapping is computed::
x_2 -> a_2, ..., x_n -> a_n
where `a_i`, for `i = 2, ..., n`, are carefully chosen integers. The
mapping is used to transform `f` into a univariate polynomial in `Z[x_1]`,
which can be factored efficiently using Zassenhaus algorithm. The last
step is to lift univariate factors to obtain true multivariate
factors. For this purpose a parallel Hensel lifting procedure is used.
The parameter ``seed`` is passed to _randint and can be used to seed randint
(when an integer) or (for testing purposes) can be a sequence of numbers.
References
==========
1. [Wang78]_
2. [Geddes92]_
"""
from sympy.utilities.randtest import _randint
randint = _randint(seed)
ct, T = dmp_zz_factor(dmp_LC(f, K), u - 1, K)
b = dmp_zz_mignotte_bound(f, u, K)
p = K(nextprime(b))
if mod is None:
if u == 1:
mod = 2
else:
mod = 1
history, configs, A, r = set([]), [], [K.zero] * u, None
try:
cs, s, E = dmp_zz_wang_test_points(f, T, ct, A, u, K)
_, H = dup_zz_factor_sqf(s, K)
r = len(H)
if r == 1:
return [f]
configs = [(s, cs, E, H, A)]
except EvaluationFailed:
pass
eez_num_configs = query('EEZ_NUMBER_OF_CONFIGS')
eez_num_tries = query('EEZ_NUMBER_OF_TRIES')
eez_mod_step = query('EEZ_MODULUS_STEP')
while len(configs) < eez_num_configs:
for _ in xrange(eez_num_tries):
A = [K(randint(-mod, mod)) for _ in xrange(u)]
if tuple(A) not in history:
history.add(tuple(A))
else:
continue
try:
cs, s, E = dmp_zz_wang_test_points(f, T, ct, A, u, K)
except EvaluationFailed:
continue
_, H = dup_zz_factor_sqf(s, K)
rr = len(H)
if r is not None:
if rr != r: # pragma: no cover
if rr < r:
configs, r = [], rr
else:
continue
else:
r = rr
if r == 1:
return [f]
configs.append((s, cs, E, H, A))
if len(configs) == eez_num_configs:
break
else:
mod += eez_mod_step
s_norm, s_arg, i = None, 0, 0
for s, _, _, _, _ in configs:
_s_norm = dup_max_norm(s, K)
if s_norm is not None:
if _s_norm < s_norm:
s_norm = _s_norm
s_arg = i
else:
s_norm = _s_norm
i += 1
_, cs, E, H, A = configs[s_arg]
orig_f = f
try:
f, H, LC = dmp_zz_wang_lead_coeffs(f, T, cs, E, H, A, u, K)
factors = dmp_zz_wang_hensel_lifting(f, H, LC, A, p, u, K)
except ExtraneousFactors: # pragma: no cover
if query('EEZ_RESTART_IF_NEEDED'):
return dmp_zz_wang(orig_f, u, K, mod + 1)
else:
raise ExtraneousFactors(
"we need to restart algorithm with better parameters")
negative, result = 0, []
for f in factors:
_, f = dmp_ground_primitive(f, u, K)
if K.is_negative(dmp_ground_LC(f, u, K)):
f = dmp_neg(f, u, K)
result.append(f)
return result
def dmp_zz_wang(f, u, K, mod=None, seed=None):
"""
Factor primitive square-free polynomials in `Z[X]`.
Given a multivariate polynomial `f` in `Z[x_1,...,x_n]`, which is
primitive and square-free in `x_1`, computes factorization of `f` into
irreducibles over integers.
The procedure is based on Wang's Enhanced Extended Zassenhaus
algorithm. The algorithm works by viewing `f` as a univariate polynomial
in `Z[x_2,...,x_n][x_1]`, for which an evaluation mapping is computed::
x_2 -> a_2, ..., x_n -> a_n
where `a_i`, for `i = 2, ..., n`, are carefully chosen integers. The
mapping is used to transform `f` into a univariate polynomial in `Z[x_1]`,
which can be factored efficiently using Zassenhaus algorithm. The last
step is to lift univariate factors to obtain true multivariate
factors. For this purpose a parallel Hensel lifting procedure is used.
The parameter ``seed`` is passed to _randint and can be used to seed randint
(when an integer) or (for testing purposes) can be a sequence of numbers.
References
==========
1. [Wang78]_
2. [Geddes92]_
"""
from sympy.utilities.randtest import _randint
randint = _randint(seed)
ct, T = dmp_zz_factor(dmp_LC(f, K), u - 1, K)
b = dmp_zz_mignotte_bound(f, u, K)
p = K(nextprime(b))
if mod is None:
if u == 1:
mod = 2
else:
mod = 1
history, configs, A, r = set([]), [], [K.zero]*u, None
try:
cs, s, E = dmp_zz_wang_test_points(f, T, ct, A, u, K)
_, H = dup_zz_factor_sqf(s, K)
r = len(H)
if r == 1:
return [f]
configs = [(s, cs, E, H, A)]
except EvaluationFailed:
pass
eez_num_configs = query('EEZ_NUMBER_OF_CONFIGS')
eez_num_tries = query('EEZ_NUMBER_OF_TRIES')
eez_mod_step = query('EEZ_MODULUS_STEP')
while len(configs) < eez_num_configs:
for _ in range(eez_num_tries):
A = [ K(randint(-mod, mod)) for _ in range(u) ]
if tuple(A) not in history:
history.add(tuple(A))
else:
continue
try:
cs, s, E = dmp_zz_wang_test_points(f, T, ct, A, u, K)
except EvaluationFailed:
continue
_, H = dup_zz_factor_sqf(s, K)
rr = len(H)
if r is not None:
if rr != r: # pragma: no cover
if rr < r:
configs, r = [], rr
else:
continue
else:
r = rr
if r == 1:
return [f]
configs.append((s, cs, E, H, A))
if len(configs) == eez_num_configs:
break
else:
mod += eez_mod_step
s_norm, s_arg, i = None, 0, 0
for s, _, _, _, _ in configs:
_s_norm = dup_max_norm(s, K)
if s_norm is not None:
if _s_norm < s_norm:
s_norm = _s_norm
s_arg = i
else:
s_norm = _s_norm
i += 1
_, cs, E, H, A = configs[s_arg]
orig_f = f
try:
f, H, LC = dmp_zz_wang_lead_coeffs(f, T, cs, E, H, A, u, K)
factors = dmp_zz_wang_hensel_lifting(f, H, LC, A, p, u, K)
except ExtraneousFactors: # pragma: no cover
if query('EEZ_RESTART_IF_NEEDED'):
return dmp_zz_wang(orig_f, u, K, mod + 1)
else:
raise ExtraneousFactors(
"we need to restart algorithm with better parameters")
negative, result = 0, []
for f in factors:
_, f = dmp_ground_primitive(f, u, K)
if K.is_negative(dmp_ground_LC(f, u, K)):
f = dmp_neg(f, u, K)
result.append(f)
return result
from sympy import (jn, yn, symbols, Symbol, sin, cos, pi, S, jn_zeros, besselj,
bessely, besseli, besselk, hankel1, hankel2, hn1, hn2,
expand_func, sqrt, sinh, cosh, diff, series, gamma, hyper,
Abs, I, O, oo, conjugate)
from sympy.functions.special.bessel import fn
from sympy.functions.special.bessel import (airyai, airybi,
airyaiprime, airybiprime)
from sympy.utilities.randtest import (random_complex_number as randcplx,
verify_numerically as tn,
test_derivative_numerically as td,
_randint)
from sympy.utilities.pytest import raises
from sympy.abc import z, n, k, x
randint = _randint()
def test_bessel_rand():
for f in [besselj, bessely, besseli, besselk, hankel1, hankel2]:
assert td(f(randcplx(), z), z)
for f in [jn, yn, hn1, hn2]:
assert td(f(randint(-10, 10), z), z)
def test_bessel_twoinputs():
for f in [besselj, bessely, besseli, besselk, hankel1, hankel2, jn, yn]:
raises(TypeError, lambda: f(1))
raises(TypeError, lambda: f(1, 2, 3))
from sympy import jn, yn, symbols, sin, cos, pi, S, jn_zeros, besselj, \
bessely, besseli, besselk, hankel1, hankel2, expand_func, \
latex, sqrt, sinh, cosh
from sympy.functions.special.bessel import fn
from sympy.utilities.pytest import raises, skip
from sympy.utilities.randtest import \
random_complex_number as randcplx, \
test_numerically as tn, \
test_derivative_numerically as td, \
_randint
from sympy.abc import z, n, k, x
randint = _randint()
def test_bessel_rand():
for f in [besselj, bessely, besseli, besselk, hankel1, hankel2, jn, yn]:
assert td(f(randcplx(), z), z)
def test_diff():
assert besselj(n, z).diff(z) == besselj(n - 1, z)/2 - besselj(n + 1, z)/2
assert bessely(n, z).diff(z) == bessely(n - 1, z)/2 - bessely(n + 1, z)/2
assert besseli(n, z).diff(z) == besseli(n - 1, z)/2 + besseli(n + 1, z)/2
assert besselk(n, z).diff(z) == -besselk(n - 1, z)/2 - besselk(n + 1, z)/2
assert hankel1(n, z).diff(z) == hankel1(n - 1, z)/2 - hankel1(n + 1, z)/2
assert hankel2(n, z).diff(z) == hankel2(n - 1, z)/2 - hankel2(n + 1, z)/2
def test_rewrite():
from sympy import polar_lift, exp, I
