def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
session = self._get_session(email=watch_user["Username"], password=watch_user["Password"])
# Then, check for users with new activities
self._rate_limit()
watch_activities_resp = session.get("http://connect.garmin.com/proxy/activitylist-service/activities/subscriptionFeed?limit=1000")
try:
watch_activities = watch_activities_resp.json()
except ValueError:
raise Exception("Could not parse new activities list: %s %s" % (watch_activities_resp.status_code, watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"]) for x in watch_activities["activityList"]]
active_user_pairs.sort(key=lambda x: x[1]) # Highest IDs last (so they make it into the dict, supplanting lower IDs where appropriate)
active_users = dict(active_user_pairs)
active_user_recs = [ServiceRecord(x) for x in db.connections.find({"ExternalID": {"$in": list(active_users.keys())}}, {"Config": 1, "ExternalID": 1, "Service": 1})]
if len(active_user_recs) != len(active_users.keys()):
logger.warning("Mismatch %d records found for %d active users" % (len(active_user_recs), len(active_users.keys())))
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration()["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec.ExternalID)
active_user_rec.SetConfiguration({"WatchUserLastID": this_active_id, "WatchUserKey": watch_user_key})
self._rate_limit()
pending_connections_resp = session.get("http://connect.garmin.com/proxy/userprofile-service/connection/pending")
try:
pending_connections = pending_connections_resp.json()
except ValueError:
logger.error("Could not parse pending connection requests: %s %s" % (pending_connections_resp.status_code, pending_connections_resp.text))
else:
valid_pending_connections_external_ids = [x["ExternalID"] for x in db.connections.find({"Service": "garminconnect", "ExternalID": {"$in": [x["displayName"] for x in pending_connections]}}, {"ExternalID": 1})]
logger.info("Accepting %d, denying %d connection requests for %s" % (len(valid_pending_connections_external_ids), len(pending_connections) - len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect["displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = session.put("http://connect.garmin.com/proxy/userprofile-service/connection/accept/%s" % pending_connect["connectionRequestId"])
if connect_resp.status_code != 200:
logger.error("Error accepting request on watch account %s: %s %s" % (watch_user["Name"], connect_resp.status_code, connect_resp.text))
else:
self._rate_limit()
ignore_resp = session.put("http://connect.garmin.com/proxy/userprofile-service/connection/decline/%s" % pending_connect["connectionRequestId"])
return to_sync_ids
def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
session = self._get_session(email=watch_user["Username"], password=watch_user["Password"], skip_cache=True)
# Then, check for users with new activities
self._rate_limit()
watch_activities_resp = session.get("http://connect.garmin.com/proxy/activitylist-service/activities/subscriptionFeed?limit=1000")
try:
watch_activities = watch_activities_resp.json()
except ValueError:
raise Exception("Could not parse new activities list: %s %s" % (watch_activities_resp.status_code, watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"]) for x in watch_activities["activityList"]]
active_user_pairs.sort(key=lambda x: x[1]) # Highest IDs last (so they make it into the dict, supplanting lower IDs where appropriate)
active_users = dict(active_user_pairs)
active_user_recs = [ServiceRecord(x) for x in db.connections.find({"ExternalID": {"$in": list(active_users.keys())}, "Service": "garminconnect"}, {"Config": 1, "ExternalID": 1, "Service": 1})]
if len(active_user_recs) != len(active_users.keys()):
logger.warning("Mismatch %d records found for %d active users" % (len(active_user_recs), len(active_users.keys())))
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration()["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec.ExternalID)
active_user_rec.SetConfiguration({"WatchUserLastID": this_active_id, "WatchUserKey": watch_user_key})
self._rate_limit()
pending_connections_resp = session.get("http://connect.garmin.com/proxy/userprofile-service/connection/pending")
try:
pending_connections = pending_connections_resp.json()
except ValueError:
logger.error("Could not parse pending connection requests: %s %s" % (pending_connections_resp.status_code, pending_connections_resp.text))
else:
valid_pending_connections_external_ids = [x["ExternalID"] for x in db.connections.find({"Service": "garminconnect", "ExternalID": {"$in": [x["displayName"] for x in pending_connections]}}, {"ExternalID": 1})]
logger.info("Accepting %d, denying %d connection requests for %s" % (len(valid_pending_connections_external_ids), len(pending_connections) - len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect["displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = session.put("http://connect.garmin.com/proxy/userprofile-service/connection/accept/%s" % pending_connect["connectionRequestId"])
if connect_resp.status_code != 200:
logger.error("Error accepting request on watch account %s: %s %s" % (watch_user["Name"], connect_resp.status_code, connect_resp.text))
else:
self._rate_limit()
ignore_resp = session.put("http://connect.garmin.com/proxy/userprofile-service/connection/decline/%s" % pending_connect["connectionRequestId"])
return to_sync_ids
def _user_watch_user(self, serviceRecord):
if not serviceRecord.GetConfiguration()["WatchUserKey"]:
user_key = random.choice(list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))
logger.info("Assigning %s a new watch user %s" % (serviceRecord.ExternalID, user_key))
serviceRecord.SetConfiguration({"WatchUserKey": user_key})
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[user_key]
else:
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[serviceRecord.GetConfiguration()["WatchUserKey"]]
def _user_watch_user(self, serviceRecord):
if not serviceRecord.GetConfiguration()["WatchUserKey"]:
user_key = random.choice(list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))
logger.info("Assigning %s a new watch user %s" % (serviceRecord.ExternalID, user_key))
serviceRecord.SetConfiguration({"WatchUserKey": user_key})
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[user_key]
else:
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[serviceRecord.GetConfiguration()["WatchUserKey"]]
class GarminConnectService(ServiceBase):
ID = "garminconnect"
DisplayName = "Garmin Connect"
DisplayAbbreviation = "GC"
AuthenticationType = ServiceAuthenticationType.UsernamePassword
RequiresExtendedAuthorizationDetails = True
PartialSyncRequiresTrigger = len(GARMIN_CONNECT_USER_WATCH_ACCOUNTS) > 0
PartialSyncTriggerPollInterval = timedelta(minutes=20)
PartialSyncTriggerPollMultiple = len(
GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys())
ConfigurationDefaults = {"WatchUserKey": None, "WatchUserLastID": 0}
_activityMappings = {
"running": ActivityType.Running,
"cycling": ActivityType.Cycling,
"mountain_biking": ActivityType.MountainBiking,
"walking": ActivityType.Walking,
"hiking": ActivityType.Hiking,
"resort_skiing_snowboarding": ActivityType.DownhillSkiing,
"cross_country_skiing": ActivityType.CrossCountrySkiing,
"skate_skiing":
ActivityType.CrossCountrySkiing, # Well, it ain't downhill?
"backcountry_skiing_snowboarding":
ActivityType.CrossCountrySkiing, # ish
"skating": ActivityType.Skating,
"swimming": ActivityType.Swimming,
"rowing": ActivityType.Rowing,
"elliptical": ActivityType.Elliptical,
"fitness_equipment": ActivityType.Gym,
"rock_climbing": ActivityType.Climbing,
"mountaineering": ActivityType.Climbing,
"all":
ActivityType.Other, # everything will eventually resolve to this
"multi_sport": ActivityType.Other # Most useless type? You decide!
}
_reverseActivityMappings = { # Removes ambiguities when mapping back to their activity types
"running": ActivityType.Running,
"cycling": ActivityType.Cycling,
"mountain_biking": ActivityType.MountainBiking,
"walking": ActivityType.Walking,
"hiking": ActivityType.Hiking,
"resort_skiing_snowboarding": ActivityType.DownhillSkiing,
"cross_country_skiing": ActivityType.CrossCountrySkiing,
"skating": ActivityType.Skating,
"swimming": ActivityType.Swimming,
"rowing": ActivityType.Rowing,
"elliptical": ActivityType.Elliptical,
"fitness_equipment": ActivityType.Gym,
"rock_climbing": ActivityType.Climbing,
"other": ActivityType.Other # I guess? (vs. "all" that is)
}
SupportedActivities = list(_activityMappings.values())
SupportsHR = SupportsCadence = True
SupportsActivityDeletion = True
_sessionCache = SessionCache("garminconnect",
lifetime=timedelta(minutes=120),
freshen_on_get=True)
_reauthAttempts = 1 # per request
_unitMap = {
"mph": ActivityStatisticUnit.MilesPerHour,
"kph": ActivityStatisticUnit.KilometersPerHour,
"hmph": ActivityStatisticUnit.HectometersPerHour,
"hydph": ActivityStatisticUnit.HundredYardsPerHour,
"celcius": ActivityStatisticUnit.DegreesCelcius,
"fahrenheit": ActivityStatisticUnit.DegreesFahrenheit,
"mile": ActivityStatisticUnit.Miles,
"kilometer": ActivityStatisticUnit.Kilometers,
"foot": ActivityStatisticUnit.Feet,
"meter": ActivityStatisticUnit.Meters,
"yard": ActivityStatisticUnit.Yards,
"kilocalorie": ActivityStatisticUnit.Kilocalories,
"bpm": ActivityStatisticUnit.BeatsPerMinute,
"stepsPerMinute": ActivityStatisticUnit.DoubledStepsPerMinute,
"rpm": ActivityStatisticUnit.RevolutionsPerMinute,
"watt": ActivityStatisticUnit.Watts,
"second": ActivityStatisticUnit.Seconds,
"ms": ActivityStatisticUnit.Milliseconds
}
_obligatory_headers = {"Referer": "https://sync.tapiriik.com"}
def __init__(self):
cachedHierarchy = cachedb.gc_type_hierarchy.find_one()
if not cachedHierarchy:
rawHierarchy = requests.get(
"https://connect.garmin.com/proxy/activity-service-1.2/json/activity_types",
headers=self._obligatory_headers).text
self._activityHierarchy = json.loads(rawHierarchy)["dictionary"]
cachedb.gc_type_hierarchy.insert({"Hierarchy": rawHierarchy})
else:
self._activityHierarchy = json.loads(
cachedHierarchy["Hierarchy"])["dictionary"]
rate_lock_path = tempfile.gettempdir(
) + "/gc_rate.%s.lock" % HTTP_SOURCE_ADDR
# Ensure the rate lock file exists (...the easy way)
open(rate_lock_path, "a").close()
self._rate_lock = open(rate_lock_path, "r+")
def _rate_limit(self):
import fcntl, struct, time
min_period = 1 # I appear to been banned from Garmin Connect while determining this.
fcntl.flock(self._rate_lock, fcntl.LOCK_EX)
try:
self._rate_lock.seek(0)
last_req_start = self._rate_lock.read()
if not last_req_start:
last_req_start = 0
else:
last_req_start = float(last_req_start)
wait_time = max(0, min_period - (time.time() - last_req_start))
time.sleep(wait_time)
self._rate_lock.seek(0)
self._rate_lock.write(str(time.time()))
self._rate_lock.flush()
finally:
fcntl.flock(self._rate_lock, fcntl.LOCK_UN)
def _request_with_reauth(self, serviceRecord, req_lambda):
for i in range(self._reauthAttempts + 1):
session = self._get_session(record=serviceRecord, skip_cache=i > 0)
self._rate_limit()
result = req_lambda(session)
if result.status_code not in (403, 500):
return result
# Pass the failed response back any ways - another handler will catch it and provide a nicer error
return result
def _get_session(self,
record=None,
email=None,
password=None,
skip_cache=False):
from tapiriik.auth.credential_storage import CredentialStore
cached = self._sessionCache.Get(record.ExternalID if record else email)
if cached and not skip_cache:
logger.debug("Using cached credential")
return cached
if record:
# longing for C style overloads...
password = CredentialStore.Decrypt(
record.ExtendedAuthorization["Password"])
email = CredentialStore.Decrypt(
record.ExtendedAuthorization["Email"])
session = requests.Session()
# JSIG CAS, cool I guess.
# Not quite OAuth though, so I'll continue to collect raw credentials.
# Commented stuff left in case this ever breaks because of missing parameters...
data = {
"username": email,
"password": password,
"_eventId": "submit",
"embed": "true",
# "displayNameRequired": "false"
}
params = {
"service": "https://connect.garmin.com/post-auth/login",
# "redirectAfterAccountLoginUrl": "http://connect.garmin.com/post-auth/login",
# "redirectAfterAccountCreationUrl": "http://connect.garmin.com/post-auth/login",
# "webhost": "olaxpw-connect00.garmin.com",
"clientId": "GarminConnect",
# "gauthHost": "https://sso.garmin.com/sso",
# "rememberMeShown": "true",
# "rememberMeChecked": "false",
"consumeServiceTicket": "false",
# "id": "gauth-widget",
# "embedWidget": "false",
# "cssUrl": "https://static.garmincdn.com/com.garmin.connect/ui/src-css/gauth-custom.css",
# "source": "http://connect.garmin.com/en-US/signin",
# "createAccountShown": "true",
# "openCreateAccount": "false",
# "usernameShown": "true",
# "displayNameShown": "false",
# "initialFocus": "true",
# "locale": "en"
}
# I may never understand what motivates people to mangle a perfectly good protocol like HTTP in the ways they do...
preResp = session.get("https://sso.garmin.com/sso/login",
params=params)
if preResp.status_code != 200:
raise APIException("SSO prestart error %s %s" %
(preResp.status_code, preResp.text))
data["lt"] = re.search("name=\"lt\"\s+value=\"([^\"]+)\"",
preResp.text).groups(1)[0]
ssoResp = session.post("https://sso.garmin.com/sso/login",
params=params,
data=data,
allow_redirects=False)
if ssoResp.status_code != 200 or "temporarily unavailable" in ssoResp.text:
raise APIException("SSO error %s %s" %
(ssoResp.status_code, ssoResp.text))
if "renewPassword" in ssoResp.text:
raise APIException("Reset password",
block=True,
user_exception=UserException(
UserExceptionType.RenewPassword,
intervention_required=True))
ticket_match = re.search("ticket=([^']+)'", ssoResp.text)
if not ticket_match:
raise APIException("Invalid login",
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
ticket = ticket_match.groups(1)[0]
# ...AND WE'RE NOT DONE YET!
self._rate_limit()
gcRedeemResp = session.get(
"https://connect.garmin.com/post-auth/login",
params={"ticket": ticket},
allow_redirects=False)
if gcRedeemResp.status_code != 302:
raise APIException("GC redeem-start error %s %s" %
(gcRedeemResp.status_code, gcRedeemResp.text))
# There are 6 redirects that need to be followed to get the correct cookie
# ... :(
expected_redirect_count = 6
current_redirect_count = 1
while True:
self._rate_limit()
gcRedeemResp = session.get(gcRedeemResp.headers["location"],
allow_redirects=False)
if current_redirect_count >= expected_redirect_count and gcRedeemResp.status_code != 200:
raise APIException(
"GC redeem %d/%d error %s %s" %
(current_redirect_count, expected_redirect_count,
gcRedeemResp.status_code, gcRedeemResp.text))
if gcRedeemResp.status_code == 200 or gcRedeemResp.status_code == 404:
break
current_redirect_count += 1
if current_redirect_count > expected_redirect_count:
break
self._sessionCache.Set(record.ExternalID if record else email, session)
session.headers.update(self._obligatory_headers)
return session
def WebInit(self):
self.UserAuthorizationURL = WEB_ROOT + reverse(
"auth_simple", kwargs={"service": self.ID})
def Authorize(self, email, password):
from tapiriik.auth.credential_storage import CredentialStore
session = self._get_session(email=email,
password=password,
skip_cache=True)
# TODO: http://connect.garmin.com/proxy/userprofile-service/socialProfile/ has the proper immutable user ID, not that anyone ever changes this one...
self._rate_limit()
username = session.get(
"http://connect.garmin.com/user/username").json()["username"]
if not len(username):
raise APIException("Unable to retrieve username",
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
return (username, {}, {
"Email": CredentialStore.Encrypt(email),
"Password": CredentialStore.Encrypt(password)
})
def UserUploadedActivityURL(self, uploadId):
return "https://connect.garmin.com/modern/activity/%d" % uploadId
def _resolveActivityType(self, act_type):
# Mostly there are two levels of a hierarchy, so we don't really need this as the parent is included in the listing.
# But maybe they'll change that some day?
while act_type not in self._activityMappings:
try:
act_type = [
x["parent"]["key"] for x in self._activityHierarchy
if x["key"] == act_type
][0]
except IndexError:
raise ValueError(
"Activity type not found in activity hierarchy")
return self._activityMappings[act_type]
def DownloadActivityList(self, serviceRecord, exhaustive=False):
#http://connect.garmin.com/proxy/activity-search-service-1.0/json/activities?&start=0&limit=50
page = 1
pageSz = 100
activities = []
exclusions = []
while True:
logger.debug("Req with " + str({
"start": (page - 1) * pageSz,
"limit": pageSz
}))
res = self._request_with_reauth(
serviceRecord, lambda session: session.get(
"https://connect.garmin.com/modern/proxy/activity-search-service-1.0/json/activities",
params={
"start": (page - 1) * pageSz,
"limit": pageSz
}))
try:
res = res.json()["results"]
except ValueError:
res_txt = res.text # So it can capture in the log message
raise APIException("Parse failure in GC list resp: %s - %s" %
(res.status_code, res.text))
if "activities" not in res:
break # No activities on this page - empty account.
for act in res["activities"]:
act = act["activity"]
activity = UploadedActivity()
# Don't really know why sumSampleCountTimestamp doesn't appear in swim activities - they're definitely timestamped...
activity.Stationary = "sumSampleCountSpeed" not in act and "sumSampleCountTimestamp" not in act
activity.GPS = "endLatitude" in act
activity.Private = act["privacy"]["key"] == "private"
try:
activity.TZ = pytz.timezone(act["activityTimeZone"]["key"])
except pytz.exceptions.UnknownTimeZoneError:
activity.TZ = pytz.FixedOffset(
float(act["activityTimeZone"]["offset"]) * 60)
logger.debug("Name " + act["activityName"]["value"] + ":")
if len(act["activityName"]["value"].strip(
)) and act["activityName"][
"value"] != "Untitled": # This doesn't work for internationalized accounts, oh well.
activity.Name = act["activityName"]["value"]
if len(act["activityDescription"]["value"].strip()):
activity.Notes = act["activityDescription"]["value"]
# beginTimestamp/endTimestamp is in UTC
activity.StartTime = pytz.utc.localize(
datetime.utcfromtimestamp(
float(act["beginTimestamp"]["millis"]) / 1000))
if "sumElapsedDuration" in act:
activity.EndTime = activity.StartTime + timedelta(
0, round(float(act["sumElapsedDuration"]["value"])))
elif "sumDuration" in act:
activity.EndTime = activity.StartTime + timedelta(
minutes=float(act["sumDuration"]
["minutesSeconds"].split(":")[0]),
seconds=float(act["sumDuration"]
["minutesSeconds"].split(":")[1]))
else:
activity.EndTime = pytz.utc.localize(
datetime.utcfromtimestamp(
float(act["endTimestamp"]["millis"]) / 1000))
logger.debug("Activity s/t " + str(activity.StartTime) +
" on page " + str(page))
activity.AdjustTZ()
if "sumDistance" in act and float(
act["sumDistance"]["value"]) != 0:
activity.Stats.Distance = ActivityStatistic(
self._unitMap[act["sumDistance"]["uom"]],
value=float(act["sumDistance"]["value"]))
if "device" in act and act["device"]["key"] != "unknown":
devId = DeviceIdentifier.FindMatchingIdentifierOfType(
DeviceIdentifierType.GC, {"Key": act["device"]["key"]})
ver_split = act["device"]["key"].split(".")
ver_maj = None
ver_min = None
if len(ver_split) == 4:
# 2.90.0.0
ver_maj = int(ver_split[0])
ver_min = int(ver_split[1])
activity.Device = Device(devId,
verMaj=ver_maj,
verMin=ver_min)
activity.Type = self._resolveActivityType(
act["activityType"]["key"])
activity.CalculateUID()
activity.ServiceData = {"ActivityID": int(act["activityId"])}
activities.append(activity)
logger.debug("Finished page " + str(page) + " of " +
str(res["search"]["totalPages"]))
if not exhaustive or int(res["search"]["totalPages"]) == page:
break
else:
page += 1
return activities, exclusions
def _downloadActivitySummary(self, serviceRecord, activity):
activityID = activity.ServiceData["ActivityID"]
res = self._request_with_reauth(
serviceRecord, lambda session: session.
get("https://connect.garmin.com/modern/proxy/activity-service-1.3/json/activity/"
+ str(activityID)))
try:
raw_data = res.json()
except ValueError:
raise APIException("Failure downloading activity summary %s:%s" %
(res.status_code, res.text))
stat_map = {}
def mapStat(gcKey, statKey, type):
stat_map[gcKey] = {"key": statKey, "attr": type}
def applyStats(gc_dict, stats_obj):
for gc_key, stat in stat_map.items():
if gc_key in gc_dict:
value = float(gc_dict[gc_key]["value"])
units = self._unitMap[gc_dict[gc_key]["uom"]]
if math.isinf(value):
continue # GC returns the minimum speed as "-Infinity" instead of 0 some times :S
getattr(stats_obj, stat["key"]).update(
ActivityStatistic(units, **({
stat["attr"]: value
})))
mapStat("SumMovingDuration", "MovingTime", "value")
mapStat("SumDuration", "TimerTime", "value")
mapStat("SumDistance", "Distance", "value")
mapStat("MinSpeed", "Speed", "min")
mapStat("MaxSpeed", "Speed", "max")
mapStat("WeightedMeanSpeed", "Speed", "avg")
mapStat("MinAirTemperature", "Temperature", "min")
mapStat("MaxAirTemperature", "Temperature", "max")
mapStat("WeightedMeanAirTemperature", "Temperature", "avg")
mapStat("SumEnergy", "Energy", "value")
mapStat("MaxHeartRate", "HR", "max")
mapStat("WeightedMeanHeartRate", "HR", "avg")
mapStat("MaxDoubleCadence", "RunCadence", "max")
mapStat("WeightedMeanDoubleCadence", "RunCadence", "avg")
mapStat("MaxBikeCadence", "Cadence", "max")
mapStat("WeightedMeanBikeCadence", "Cadence", "avg")
mapStat("MinPower", "Power", "min")
mapStat("MaxPower", "Power", "max")
mapStat("WeightedMeanPower", "Power", "avg")
mapStat("MinElevation", "Elevation", "min")
mapStat("MaxElevation", "Elevation", "max")
mapStat("GainElevation", "Elevation", "gain")
mapStat("LossElevation", "Elevation", "loss")
applyStats(raw_data["activity"]["activitySummary"], activity.Stats)
for lap_data in raw_data["activity"]["totalLaps"]["lapSummaryList"]:
lap = Lap()
if "BeginTimestamp" in lap_data:
lap.StartTime = pytz.utc.localize(
datetime.utcfromtimestamp(
float(lap_data["BeginTimestamp"]["value"]) / 1000))
if "EndTimestamp" in lap_data:
lap.EndTime = pytz.utc.localize(
datetime.utcfromtimestamp(
float(lap_data["EndTimestamp"]["value"]) / 1000))
elapsed_duration = None
if "SumElapsedDuration" in lap_data:
elapsed_duration = timedelta(seconds=round(
float(lap_data["SumElapsedDuration"]["value"])))
elif "SumDuration" in lap_data:
elapsed_duration = timedelta(
seconds=round(float(lap_data["SumDuration"]["value"])))
if lap.StartTime and elapsed_duration:
# Always recalculate end time based on duration, if we have the start time
lap.EndTime = lap.StartTime + elapsed_duration
if not lap.StartTime and lap.EndTime and elapsed_duration:
# Sometimes calculate start time based on duration
lap.StartTime = lap.EndTime - elapsed_duration
if not lap.StartTime or not lap.EndTime:
# Garmin Connect is weird.
raise APIExcludeActivity(
"Activity lap has no BeginTimestamp or EndTimestamp",
user_exception=UserException(UserExceptionType.Corrupt))
applyStats(lap_data, lap.Stats)
activity.Laps.append(lap)
# In Garmin Land, max can be smaller than min for this field :S
if activity.Stats.Power.Max is not None and activity.Stats.Power.Min is not None and activity.Stats.Power.Min > activity.Stats.Power.Max:
activity.Stats.Power.Min = None
def DownloadActivity(self, serviceRecord, activity):
# First, download the summary stats and lap stats
self._downloadActivitySummary(serviceRecord, activity)
if len(activity.Laps) == 1:
activity.Stats = activity.Laps[
0].Stats # They must be identical to pass the verification
if activity.Stationary:
# Nothing else to download
return activity
# https://connect.garmin.com/proxy/activity-service-1.3/json/activityDetails/####
activityID = activity.ServiceData["ActivityID"]
res = self._request_with_reauth(
serviceRecord, lambda session: session.
get("https://connect.garmin.com/modern/proxy/activity-service-1.3/json/activityDetails/"
+ str(activityID) + "?maxSize=999999999"))
try:
raw_data = res.json(
)["com.garmin.activity.details.json.ActivityDetails"]
except ValueError:
raise APIException("Activity data parse error for %s: %s" %
(res.status_code, res.text))
if "measurements" not in raw_data:
activity.Stationary = True # We were wrong, oh well
return activity
attrs_map = {}
def _map_attr(gc_key,
wp_key,
units,
in_location=False,
is_timestamp=False):
attrs_map[gc_key] = {
"key": wp_key,
"to_units": units,
"in_location": in_location, # Blegh
"is_timestamp": is_timestamp # See above
}
_map_attr("directSpeed", "Speed",
ActivityStatisticUnit.MetersPerSecond)
_map_attr("sumDistance", "Distance", ActivityStatisticUnit.Meters)
_map_attr("directHeartRate", "HR",
ActivityStatisticUnit.BeatsPerMinute)
_map_attr("directBikeCadence", "Cadence",
ActivityStatisticUnit.RevolutionsPerMinute)
_map_attr("directDoubleCadence", "RunCadence",
ActivityStatisticUnit.StepsPerMinute) # 2*x mystery solved
_map_attr("directAirTemperature", "Temp",
ActivityStatisticUnit.DegreesCelcius)
_map_attr("directPower", "Power", ActivityStatisticUnit.Watts)
_map_attr("directElevation",
"Altitude",
ActivityStatisticUnit.Meters,
in_location=True)
_map_attr("directLatitude", "Latitude", None, in_location=True)
_map_attr("directLongitude", "Longitude", None, in_location=True)
_map_attr("directTimestamp", "Timestamp", None, is_timestamp=True)
# Figure out which metrics we'll be seeing in this activity
attrs_indexed = {}
for measurement in raw_data["measurements"]:
key = measurement["key"]
if key in attrs_map:
if attrs_map[key]["to_units"]:
attrs_map[key]["from_units"] = self._unitMap[
measurement["unit"]]
if attrs_map[key]["to_units"] == attrs_map[key][
"from_units"]:
attrs_map[key]["to_units"] = attrs_map[key][
"from_units"] = None
attrs_indexed[measurement["metricsIndex"]] = attrs_map[key]
# Process the data frames
frame_idx = 0
active_lap_idx = 0
for frame in raw_data["metrics"]:
wp = Waypoint()
for idx, attr in attrs_indexed.items():
value = frame["metrics"][idx]
target_obj = wp
if attr["in_location"]:
if not wp.Location:
wp.Location = Location()
target_obj = wp.Location
# Handle units
if attr["is_timestamp"]:
value = pytz.utc.localize(
datetime.utcfromtimestamp(value / 1000))
elif attr["to_units"]:
value = ActivityStatistic.convertValue(
value, attr["from_units"], attr["to_units"])
# Write the value (can't use __dict__ because __slots__)
setattr(target_obj, attr["key"], value)
# Fix up lat/lng being zero (which appear to represent missing coords)
if wp.Location and wp.Location.Latitude == 0 and wp.Location.Longitude == 0:
wp.Location.Latitude = None
wp.Location.Longitude = None
# Please visit a physician before complaining about this
if wp.HR == 0:
wp.HR = None
# Bump the active lap if required
while (active_lap_idx < len(activity.Laps) - 1
and # Not the last lap
activity.Laps[active_lap_idx + 1].StartTime <= wp.Timestamp
):
active_lap_idx += 1
activity.Laps[active_lap_idx].Waypoints.append(wp)
frame_idx += 1
return activity
def UploadActivity(self, serviceRecord, activity):
#/proxy/upload-service-1.1/json/upload/.fit
fit_file = FITIO.Dump(activity)
files = {
"data":
("tap-sync-" + str(os.getpid()) + "-" + activity.UID + ".fit",
fit_file)
}
res = self._request_with_reauth(
serviceRecord, lambda session: session.post(
"https://connect.garmin.com/proxy/upload-service-1.1/json/upload/.fit",
files=files))
res = res.json()["detailedImportResult"]
if len(res["successes"]) == 0:
if len(res["failures"]) and len(
res["failures"][0]["messages"]) and res["failures"][0][
"messages"][0]["content"] == "Duplicate activity":
logger.debug("Duplicate")
return # ...cool?
raise APIException("Unable to upload activity %s" % res)
if len(res["successes"]) > 1:
raise APIException(
"Uploaded succeeded, resulting in too many activities")
actid = res["successes"][0]["internalId"]
name = activity.Name # Capture in logs
notes = activity.Notes
# Update activity metadata not included in the FIT file.
metadata_object = {}
if activity.Name and activity.Name.strip():
metadata_object["activityName"] = activity.Name
if activity.Notes and activity.Notes.strip():
metadata_object["description"] = activity.Notes
if activity.Type not in [
ActivityType.Running, ActivityType.Cycling, ActivityType.Other
]:
# Set the legit activity type - whatever it is, it's not supported by the FIT schema
acttype = [
k for k, v in self._reverseActivityMappings.items()
if v == activity.Type
]
if len(acttype) == 0:
raise APIWarning(
"GarminConnect does not support activity type " +
activity.Type)
else:
acttype = acttype[0]
metadata_object["activityTypeDTO"] = {"typeKey": acttype}
if activity.Private:
metadata_object["accessControlRuleDTO"] = {"typeKey": "private"}
if metadata_object:
metadata_object["activityId"] = actid
encoding_headers = {
"Content-Type": "application/json; charset=UTF-8"
} # GC really, really needs this part, otherwise it throws obscure errors like "Invalid signature for signature method HMAC-SHA1"
res = self._request_with_reauth(
serviceRecord, lambda session: session.
put("https://connect.garmin.com/proxy/activity-service/activity/"
+ str(actid),
data=json.dumps(metadata_object),
headers=encoding_headers))
if res.status_code != 204:
raise APIWarning("Unable to set activity metadata - %d %s" %
(res.status_code, res.text))
return actid
def _user_watch_user(self, serviceRecord):
if not serviceRecord.GetConfiguration()["WatchUserKey"]:
user_key = random.choice(
list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))
logger.info("Assigning %s a new watch user %s" %
(serviceRecord.ExternalID, user_key))
serviceRecord.SetConfiguration({"WatchUserKey": user_key})
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[user_key]
else:
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[
serviceRecord.GetConfiguration()["WatchUserKey"]]
def SubscribeToPartialSyncTrigger(self, serviceRecord):
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/request/cpfair
# (the poll worker finishes the connection)
user_name = self._user_watch_user(serviceRecord)["Name"]
logger.info("Requesting connection to %s from %s" %
(user_name, serviceRecord.ExternalID))
self._rate_limit()
resp = self._get_session(record=serviceRecord, skip_cache=True).put(
"https://connect.garmin.com/proxy/userprofile-service/connection/request/%s"
% user_name)
try:
assert resp.status_code == 200
assert resp.json()["requestStatus"] == "Created"
except:
raise APIException(
"Connection request failed with user watch account %s: %s %s" %
(user_name, resp.status_code, resp.text))
else:
serviceRecord.SetConfiguration(
{"WatchConnectionID": resp.json()["id"]})
serviceRecord.SetPartialSyncTriggerSubscriptionState(True)
def UnsubscribeFromPartialSyncTrigger(self, serviceRecord):
# GET http://connect.garmin.com/proxy/userprofile-service/socialProfile/connections to get the ID
# {"fullName":null,"userConnections":[{"userId":5754439,"displayName":"TapiirikAPITEST","fullName":null,"location":null,"profileImageUrlMedium":null,"profileImageUrlSmall":null,"connectionRequestId":1566024,"userConnectionStatus":2,"userRoles":["ROLE_CONNECTUSER","ROLE_FITNESS_USER"],"userPro":false}]}
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/end/1904201
# Unfortunately there's no way to delete a pending request - the poll worker will do this from the other end
active_watch_user = self._user_watch_user(serviceRecord)
session = self._get_session(email=active_watch_user["Username"],
password=active_watch_user["Password"],
skip_cache=True)
if "WatchConnectionID" in serviceRecord.GetConfiguration():
self._rate_limit()
dc_resp = session.put(
"https://connect.garmin.com/modern/proxy/userprofile-service/connection/end/%s"
% serviceRecord.GetConfiguration()["WatchConnectionID"])
if dc_resp.status_code != 200:
raise APIException(
"Error disconnecting user watch accunt %s from %s: %s %s" %
(active_watch_user, serviceRecord.ExternalID,
dc_resp.status_code, dc_resp.text))
serviceRecord.SetConfiguration({
"WatchUserKey": None,
"WatchConnectionID": None
})
serviceRecord.SetPartialSyncTriggerSubscriptionState(False)
else:
# I broke Garmin Connect by having too many connections per account, so I can no longer query the connection list
# All the connection request emails are sitting unopened in an email inbox, though, so I'll be backfilling the IDs from those
raise APIException("Did not store connection ID")
def ShouldForcePartialSyncTrigger(self, serviceRecord):
# The poll worker can't see private activities.
return serviceRecord.GetConfiguration()["sync_private"]
def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/modern/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(
GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
session = self._get_session(email=watch_user["Username"],
password=watch_user["Password"],
skip_cache=True)
# Then, check for users with new activities
self._rate_limit()
watch_activities_resp = session.get(
"https://connect.garmin.com/modern/proxy/activitylist-service/activities/subscriptionFeed?limit=1000"
)
try:
watch_activities = watch_activities_resp.json()
except ValueError:
raise Exception("Could not parse new activities list: %s %s" %
(watch_activities_resp.status_code,
watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"])
for x in watch_activities["activityList"]]
active_user_pairs.sort(
key=lambda x: x[1]
) # Highest IDs last (so they make it into the dict, supplanting lower IDs where appropriate)
active_users = dict(active_user_pairs)
active_user_recs = [
ServiceRecord(x) for x in db.connections.find(
{
"ExternalID": {
"$in": list(active_users.keys())
},
"Service": "garminconnect"
}, {
"Config": 1,
"ExternalID": 1,
"Service": 1
})
]
if len(active_user_recs) != len(active_users.keys()):
logger.warning("Mismatch %d records found for %d active users" %
(len(active_user_recs), len(active_users.keys())))
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration(
)["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec.ExternalID)
active_user_rec.SetConfiguration({
"WatchUserLastID": this_active_id,
"WatchUserKey": watch_user_key
})
self._rate_limit()
pending_connections_resp = session.get(
"https://connect.garmin.com/modern/proxy/userprofile-service/connection/pending"
)
try:
pending_connections = pending_connections_resp.json()
except ValueError:
logger.error("Could not parse pending connection requests: %s %s" %
(pending_connections_resp.status_code,
pending_connections_resp.text))
else:
valid_pending_connections_external_ids = [
x["ExternalID"] for x in db.connections.find(
{
"Service": "garminconnect",
"ExternalID": {
"$in":
[x["displayName"] for x in pending_connections]
}
}, {"ExternalID": 1})
]
logger.info(
"Accepting %d, denying %d connection requests for %s" %
(len(valid_pending_connections_external_ids),
len(pending_connections) -
len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect[
"displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = session.put(
"https://connect.garmin.com/modern/proxy/userprofile-service/connection/accept/%s"
% pending_connect["connectionRequestId"])
if connect_resp.status_code != 200:
logger.error(
"Error accepting request on watch account %s: %s %s"
% (watch_user["Name"], connect_resp.status_code,
connect_resp.text))
else:
self._rate_limit()
session.put(
"https://connect.garmin.com/modern/proxy/userprofile-service/connection/decline/%s"
% pending_connect["connectionRequestId"])
return to_sync_ids
def RevokeAuthorization(self, serviceRecord):
# nothing to do here...
pass
def DeleteCachedData(self, serviceRecord):
# nothing cached...
pass
def DeleteActivity(self, serviceRecord, uploadId):
session = self._get_session(record=serviceRecord)
self._rate_limit()
del_res = session.delete(
"https://connect.garmin.com/modern/proxy/activity-service/activity/%d"
% uploadId)
del_res.raise_for_status()
def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/modern/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
logger.debug("Initiating session for watch user %s", watch_user["Username"])
sess_args = {
"email": watch_user["Username"],
"password": watch_user["Password"]
}
# These seems to fail with a 500 (talkking about a timeout) the first time, so keep trying.
SERVER_ERROR_RETRIES = 10
PAGE_SIZE = 100
TOTAL_SIZE = 1000
# Then, check for users with new activities
watch_activities = []
for i in range(1, TOTAL_SIZE, PAGE_SIZE):
for x in range(SERVER_ERROR_RETRIES):
logger.debug("Fetching activity list from %d - attempt %d", i, x)
watch_activities_resp = self._request_with_reauth(
lambda session: session.get("https://connect.garmin.com/modern/proxy/activitylist-service/activities/subscriptionFeed",
params={"limit": PAGE_SIZE, "start": i}),
**sess_args)
if watch_activities_resp.status_code != 500:
break
try:
watch_activities += watch_activities_resp.json()["activityList"]
except ValueError:
raise Exception("Could not parse new activities list: %s %s" % (watch_activities_resp.status_code, watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"]) for x in watch_activities]
active_user_pairs.sort(key=lambda x: x[1]) # Highest IDs last (so they make it into the dict, supplanting lower IDs where appropriate)
active_users = dict(active_user_pairs)
active_user_recs = [ServiceRecord(x) for x in db.connections.find({"ExternalID": {"$in": list(active_users.keys())}, "Service": "garminconnect"}, {"Config": 1, "ExternalID": 1, "Service": 1})]
if len(active_user_recs) != len(active_users.keys()):
logger.warning("Mismatch %d records found for %d active users" % (len(active_user_recs), len(active_users.keys())))
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration()["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec.ExternalID)
active_user_rec.SetConfiguration({"WatchUserLastID": this_active_id, "WatchUserKey": watch_user_key})
for x in range(SERVER_ERROR_RETRIES):
self._rate_limit()
logger.debug("Fetching connection request list - attempt %d", x)
pending_connections_resp = self._request_with_reauth(
lambda session: session.get("https://connect.garmin.com/modern/proxy/userprofile-service/connection/pending"),
**sess_args)
if pending_connections_resp.status_code != 500:
break
try:
pending_connections = pending_connections_resp.json()
except ValueError:
logger.error("Could not parse pending connection requests: %s %s" % (pending_connections_resp.status_code, pending_connections_resp.text))
else:
valid_pending_connections_external_ids = [x["ExternalID"] for x in db.connections.find({"Service": "garminconnect", "ExternalID": {"$in": [x["displayName"] for x in pending_connections]}}, {"ExternalID": 1})]
logger.info("Accepting %d, denying %d connection requests for %s" % (len(valid_pending_connections_external_ids), len(pending_connections) - len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect["displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = self._request_with_reauth(
lambda session: session.put("https://connect.garmin.com/modern/proxy/userprofile-service/connection/accept/%s" % pending_connect["connectionRequestId"]),
**sess_args)
if connect_resp.status_code != 200:
logger.error("Error accepting request on watch account %s: %s %s" % (watch_user["Name"], connect_resp.status_code, connect_resp.text))
else:
self._rate_limit()
self._request_with_reauth(
lambda session: session.put("https://connect.garmin.com/modern/proxy/userprofile-service/connection/decline/%s" % pending_connect["connectionRequestId"]),
**sess_args)
return to_sync_ids
def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/modern/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
logger.debug("Initiating session for watch user %s", watch_user["Username"])
sess_args = {
"email": watch_user["Username"],
"password": watch_user["Password"]
}
# These seems to fail with a 500 (talkking about a timeout) the first time, so keep trying.
SERVER_ERROR_RETRIES = 10
PAGE_SIZE = 100
TOTAL_SIZE = 1000
# Then, check for users with new activities
watch_activities = []
for i in range(1, TOTAL_SIZE, PAGE_SIZE):
for x in range(SERVER_ERROR_RETRIES):
logger.debug("Fetching activity list from %d - attempt %d", i, x)
watch_activities_resp = self._request_with_reauth(
lambda session: session.get("https://connect.garmin.com/modern/proxy/activitylist-service/activities/subscriptionFeed",
params={"limit": PAGE_SIZE, "start": i}),
**sess_args)
if watch_activities_resp.status_code != 500:
break
try:
watch_activities += watch_activities_resp.json()["activityList"]
except ValueError:
raise Exception("Could not parse new activities list: %s %s" % (watch_activities_resp.status_code, watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"]) for x in watch_activities]
active_user_pairs.sort(key=lambda x: x[1]) # Highest IDs last (so they make it into the dict, supplanting lower IDs where appropriate)
active_users = dict(active_user_pairs)
active_user_recs = [ServiceRecord(x) for x in db.connections.find({"ExternalID": {"$in": list(active_users.keys())}, "Service": "garminconnect"}, {"Config": 1, "ExternalID": 1, "Service": 1})]
if len(active_user_recs) != len(active_users.keys()):
logger.warning("Mismatch %d records found for %d active users" % (len(active_user_recs), len(active_users.keys())))
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration()["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec.ExternalID)
active_user_rec.SetConfiguration({"WatchUserLastID": this_active_id, "WatchUserKey": watch_user_key})
for x in range(SERVER_ERROR_RETRIES):
self._rate_limit()
logger.debug("Fetching connection request list - attempt %d", x)
pending_connections_resp = self._request_with_reauth(
lambda session: session.get("https://connect.garmin.com/modern/proxy/userprofile-service/connection/pending"),
**sess_args)
if pending_connections_resp.status_code != 500:
break
try:
pending_connections = pending_connections_resp.json()
except ValueError:
logger.error("Could not parse pending connection requests: %s %s" % (pending_connections_resp.status_code, pending_connections_resp.text))
else:
valid_pending_connections_external_ids = [x["ExternalID"] for x in db.connections.find({"Service": "garminconnect", "ExternalID": {"$in": [x["displayName"] for x in pending_connections]}}, {"ExternalID": 1})]
logger.info("Accepting %d, denying %d connection requests for %s" % (len(valid_pending_connections_external_ids), len(pending_connections) - len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect["displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = self._request_with_reauth(
lambda session: session.put("https://connect.garmin.com/modern/proxy/userprofile-service/connection/accept/%s" % pending_connect["connectionRequestId"]),
**sess_args)
if connect_resp.status_code != 200:
logger.error("Error accepting request on watch account %s: %s %s" % (watch_user["Name"], connect_resp.status_code, connect_resp.text))
else:
self._rate_limit()
self._request_with_reauth(
lambda session: session.put("https://connect.garmin.com/modern/proxy/userprofile-service/connection/decline/%s" % pending_connect["connectionRequestId"]),
**sess_args)
return to_sync_ids
class GarminConnectService(ServiceBase):
ID = "garminconnect"
DisplayName = "Garmin Connect"
DisplayAbbreviation = "GC"
AuthenticationType = ServiceAuthenticationType.UsernamePassword
RequiresExtendedAuthorizationDetails = True
PartialSyncRequiresTrigger = len(GARMIN_CONNECT_USER_WATCH_ACCOUNTS) > 0
PartialSyncTriggerPollInterval = timedelta(minutes=20)
PartialSyncTriggerPollMultiple = len(
GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys())
# +1 from default due to my embarrassing inability to...
# a) create a reasonable schema to allow for these updates.
# b) write a query to reset the counters in the existing schema.
DownloadRetryCount = 6
ConfigurationDefaults = {"WatchUserKey": None, "WatchUserLastID": 0}
_activityMappings = {
"running": ActivityType.Running,
"indoor_running": ActivityType.Running,
"cycling": ActivityType.Cycling,
"mountain_biking": ActivityType.MountainBiking,
"walking": ActivityType.Walking,
"hiking": ActivityType.Hiking,
"resort_skiing_snowboarding": ActivityType.DownhillSkiing,
"cross_country_skiing": ActivityType.CrossCountrySkiing,
"skate_skiing":
ActivityType.CrossCountrySkiing, # Well, it ain't downhill?
"backcountry_skiing_snowboarding":
ActivityType.CrossCountrySkiing, # ish
"skating": ActivityType.Skating,
"swimming": ActivityType.Swimming,
"rowing": ActivityType.Rowing,
"elliptical": ActivityType.Elliptical,
"fitness_equipment": ActivityType.Gym,
"rock_climbing": ActivityType.Climbing,
"mountaineering": ActivityType.Climbing,
"strength_training": ActivityType.StrengthTraining,
"stand_up_paddleboarding": ActivityType.StandUpPaddling,
"all":
ActivityType.Other, # everything will eventually resolve to this
"multi_sport": ActivityType.Other # Most useless type? You decide!
}
_reverseActivityMappings = { # Removes ambiguities when mapping back to their activity types
"running": ActivityType.Running,
"cycling": ActivityType.Cycling,
"mountain_biking": ActivityType.MountainBiking,
"walking": ActivityType.Walking,
"hiking": ActivityType.Hiking,
"resort_skiing_snowboarding": ActivityType.DownhillSkiing,
"cross_country_skiing": ActivityType.CrossCountrySkiing,
"skating": ActivityType.Skating,
"swimming": ActivityType.Swimming,
"rowing": ActivityType.Rowing,
"elliptical": ActivityType.Elliptical,
"fitness_equipment": ActivityType.Gym,
"rock_climbing": ActivityType.Climbing,
"strength_training": ActivityType.StrengthTraining,
"stand_up_paddleboarding": ActivityType.StandUpPaddling,
"other": ActivityType.Other # I guess? (vs. "all" that is)
}
SupportedActivities = list(_activityMappings.values())
SupportsHR = SupportsCadence = True
SupportsActivityDeletion = True
_sessionCache = SessionCache("garminconnect",
lifetime=timedelta(minutes=120),
freshen_on_get=True)
_reauthAttempts = 1 # per request
_unitMap = {
"mph": ActivityStatisticUnit.MilesPerHour,
"kph": ActivityStatisticUnit.KilometersPerHour,
"hmph": ActivityStatisticUnit.HectometersPerHour,
"hydph": ActivityStatisticUnit.HundredYardsPerHour,
"celcius": ActivityStatisticUnit.DegreesCelcius,
"fahrenheit": ActivityStatisticUnit.DegreesFahrenheit,
"mile": ActivityStatisticUnit.Miles,
"kilometer": ActivityStatisticUnit.Kilometers,
"foot": ActivityStatisticUnit.Feet,
"meter": ActivityStatisticUnit.Meters,
"yard": ActivityStatisticUnit.Yards,
"kilocalorie": ActivityStatisticUnit.Kilocalories,
"bpm": ActivityStatisticUnit.BeatsPerMinute,
"stepsPerMinute": ActivityStatisticUnit.DoubledStepsPerMinute,
"rpm": ActivityStatisticUnit.RevolutionsPerMinute,
"watt": ActivityStatisticUnit.Watts,
"second": ActivityStatisticUnit.Seconds,
"ms": ActivityStatisticUnit.Milliseconds,
"mps": ActivityStatisticUnit.MetersPerSecond
}
_obligatory_headers = {"Referer": "https://sync.tapiriik.com"}
def __init__(self):
cachedHierarchy = cachedb.gc_type_hierarchy.find_one()
if not cachedHierarchy:
rawHierarchy = requests.get(
"https://connect.garmin.com/modern/proxy/activity-service/activity/activityTypes",
headers=self._obligatory_headers).text
self._activityHierarchy = json.loads(rawHierarchy)
cachedb.gc_type_hierarchy.insert({"Hierarchy": rawHierarchy})
else:
self._activityHierarchy = json.loads(cachedHierarchy["Hierarchy"])
# hashmaps for determining parent type key
self._typeKeyParentMap = {}
self._typeIdKeyMap = {}
for x in self._activityHierarchy:
self._typeKeyParentMap[x["typeKey"]] = x["parentTypeId"]
self._typeIdKeyMap[x["typeId"]] = x["typeKey"]
rate_lock_path = tempfile.gettempdir(
) + "/gc_rate.%s.lock" % HTTP_SOURCE_ADDR
# Ensure the rate lock file exists (...the easy way)
open(rate_lock_path, "a").close()
self._rate_lock = open(rate_lock_path, "r+")
def _rate_limit(self):
import fcntl, struct, time
min_period = 1 # I appear to been banned from Garmin Connect while determining this.
fcntl.flock(self._rate_lock, fcntl.LOCK_EX)
try:
self._rate_lock.seek(0)
last_req_start = self._rate_lock.read()
if not last_req_start:
last_req_start = 0
else:
last_req_start = float(last_req_start)
wait_time = max(0, min_period - (time.time() - last_req_start))
time.sleep(wait_time)
self._rate_lock.seek(0)
self._rate_lock.write(str(time.time()))
self._rate_lock.flush()
finally:
fcntl.flock(self._rate_lock, fcntl.LOCK_UN)
def _request_with_reauth(self,
req_lambda,
serviceRecord=None,
email=None,
password=None):
for i in range(self._reauthAttempts + 1):
session = self._get_session(record=serviceRecord,
email=email,
password=password,
skip_cache=i > 0)
self._rate_limit()
result = req_lambda(session)
if result.status_code not in (403, 500):
return result
# Pass the failed response back any ways - another handler will catch it and provide a nicer error
return result
def _get_session(self,
record=None,
email=None,
password=None,
skip_cache=False):
from tapiriik.auth.credential_storage import CredentialStore
cached = self._sessionCache.Get(record.ExternalID if record else email)
if cached and not skip_cache:
logger.debug("Using cached credential")
return cached
if record:
# longing for C style overloads...
password = CredentialStore.Decrypt(
record.ExtendedAuthorization["Password"])
email = CredentialStore.Decrypt(
record.ExtendedAuthorization["Email"])
session = requests.Session()
# JSIG CAS, cool I guess.
# Not quite OAuth though, so I'll continue to collect raw credentials.
# Commented stuff left in case this ever breaks because of missing parameters...
data = {
"username": email,
"password": password,
"_eventId": "submit",
"embed": "true",
# "displayNameRequired": "false"
}
params = {
"service": "https://connect.garmin.com/modern",
# "redirectAfterAccountLoginUrl": "http://connect.garmin.com/modern",
# "redirectAfterAccountCreationUrl": "http://connect.garmin.com/modern",
# "webhost": "olaxpw-connect00.garmin.com",
"clientId": "GarminConnect",
"gauthHost": "https://sso.garmin.com/sso",
# "rememberMeShown": "true",
# "rememberMeChecked": "false",
"consumeServiceTicket": "false",
# "id": "gauth-widget",
# "embedWidget": "false",
# "cssUrl": "https://static.garmincdn.com/com.garmin.connect/ui/src-css/gauth-custom.css",
# "source": "http://connect.garmin.com/en-US/signin",
# "createAccountShown": "true",
# "openCreateAccount": "false",
# "usernameShown": "true",
# "displayNameShown": "false",
# "initialFocus": "true",
# "locale": "en"
}
# I may never understand what motivates people to mangle a perfectly good protocol like HTTP in the ways they do...
preResp = session.get("https://sso.garmin.com/sso/login",
params=params)
if preResp.status_code != 200:
raise APIException("SSO prestart error %s %s" %
(preResp.status_code, preResp.text))
ssoResp = session.post("https://sso.garmin.com/sso/login",
params=params,
data=data,
allow_redirects=False)
if ssoResp.status_code != 200 or "temporarily unavailable" in ssoResp.text:
raise APIException("SSO error %s %s" %
(ssoResp.status_code, ssoResp.text))
if ">sendEvent('FAIL')" in ssoResp.text:
raise APIException("Invalid login",
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
if ">sendEvent('ACCOUNT_LOCKED')" in ssoResp.text:
raise APIException("Account Locked",
block=True,
user_exception=UserException(
UserExceptionType.Locked,
intervention_required=True))
if "renewPassword" in ssoResp.text:
raise APIException("Reset password",
block=True,
user_exception=UserException(
UserExceptionType.RenewPassword,
intervention_required=True))
# ...AND WE'RE NOT DONE YET!
self._rate_limit()
gcRedeemResp = session.get("https://connect.garmin.com/modern",
allow_redirects=False)
if gcRedeemResp.status_code != 302:
raise APIException("GC redeem-start error %s %s" %
(gcRedeemResp.status_code, gcRedeemResp.text))
url_prefix = "https://connect.garmin.com"
# There are 6 redirects that need to be followed to get the correct cookie
# ... :(
max_redirect_count = 7
current_redirect_count = 1
while True:
self._rate_limit()
url = gcRedeemResp.headers["location"]
# Fix up relative redirects.
if url.startswith("/"):
url = url_prefix + url
url_prefix = "/".join(url.split("/")[:3])
gcRedeemResp = session.get(url, allow_redirects=False)
if current_redirect_count >= max_redirect_count and gcRedeemResp.status_code != 200:
raise APIException(
"GC redeem %d/%d error %s %s" %
(current_redirect_count, max_redirect_count,
gcRedeemResp.status_code, gcRedeemResp.text))
if gcRedeemResp.status_code == 200 or gcRedeemResp.status_code == 404:
break
current_redirect_count += 1
if current_redirect_count > max_redirect_count:
break
self._sessionCache.Set(record.ExternalID if record else email, session)
session.headers.update(self._obligatory_headers)
return session
def WebInit(self):
self.UserAuthorizationURL = WEB_ROOT + reverse(
"auth_simple", kwargs={"service": self.ID})
def Authorize(self, email, password):
from tapiriik.auth.credential_storage import CredentialStore
session = self._get_session(email=email,
password=password,
skip_cache=True)
self._rate_limit()
try:
dashboard = session.get("http://connect.garmin.com/modern")
userdata_json_str = re.search(
r"VIEWER_SOCIAL_PROFILE\s*=\s*JSON\.parse\((.+)\);$",
dashboard.text, re.MULTILINE).group(1)
userdata = json.loads(json.loads(userdata_json_str))
username = userdata["displayName"]
except Exception as e:
raise APIException("Unable to retrieve username: %s" % e,
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
return (username, {}, {
"Email": CredentialStore.Encrypt(email),
"Password": CredentialStore.Encrypt(password)
})
def UserUploadedActivityURL(self, uploadId):
return "https://connect.garmin.com/modern/activity/%d" % uploadId
def _resolveActivityType(self, act_type):
# Mostly there are two levels of a hierarchy, so we don't really need this as the parent is included in the listing.
# But maybe they'll change that some day?
while act_type not in self._activityMappings:
try:
act_type = self._typeIdKeyMap[self._typeKeyParentMap[act_type]]
except IndexError:
raise ValueError(
"Activity type not found in activity hierarchy")
return self._activityMappings[act_type]
def DownloadActivityList(self, serviceRecord, exhaustive=False):
#https://connect.garmin.com/modern/proxy/activitylist-service/activities/search/activities?limit=20&start=0
page = 1
pageSz = 100
activities = []
exclusions = []
while True:
logger.debug("Req with " + str({
"start": (page - 1) * pageSz,
"limit": pageSz
}))
res = self._request_with_reauth(
lambda session: session.get(
"https://connect.garmin.com/modern/proxy/activitylist-service/activities/search/activities",
params={
"start": (page - 1) * pageSz,
"limit": pageSz
}), serviceRecord)
try:
res = res.json()
except ValueError:
res_txt = res.text # So it can capture in the log message
raise APIException("Parse failure in GC list resp: %s - %s" %
(res.status_code, res_txt))
for act in res:
activity = UploadedActivity()
# stationary activities have movingDuration = None while non-gps static activities have 0.0
activity.Stationary = act["movingDuration"] is None
activity.GPS = act["hasPolyline"]
activity.Private = act["privacy"]["typeKey"] == "private"
activity_name = act["activityName"]
logger.debug("Name " + activity_name if activity_name
is not None else "Untitled" + ":")
if activity_name is not None and len(
activity_name.strip()
) and activity_name != "Untitled": # This doesn't work for internationalized accounts, oh well.
activity.Name = activity_name
activity_description = act["description"]
if activity_description is not None and len(
activity_description.strip()):
activity.Notes = activity_description
activity.StartTime = pytz.utc.localize(
datetime.strptime(act["startTimeGMT"],
"%Y-%m-%d %H:%M:%S"))
if act["elapsedDuration"] is not None:
activity.EndTime = activity.StartTime + timedelta(
0,
float(act["elapsedDuration"]) / 1000)
elif act["duration"] is not None:
activity.EndTime = activity.StartTime + timedelta(
0, float(act["duration"]))
else:
# somehow duration is not defined. Set 1 second then.
activity.EndTime = activity.StartTime + timedelta(0, 1)
logger.debug("Activity s/t " + str(activity.StartTime) +
" on page " + str(page))
if "distance" in act and act["distance"] and float(
act["distance"]) != 0:
activity.Stats.Distance = ActivityStatistic(
ActivityStatisticUnit.Meters,
value=float(act["distance"]))
activity.Type = self._resolveActivityType(
act["activityType"]["typeKey"])
activity.CalculateUID()
activity.ServiceData = {"ActivityID": int(act["activityId"])}
activities.append(activity)
logger.debug("Finished page " + str(page))
if not exhaustive or len(res) == 0:
break
else:
page += 1
return activities, exclusions
def _downloadActivitySummary(self, serviceRecord, activity):
activityID = activity.ServiceData["ActivityID"]
summary_resp = self._request_with_reauth(
lambda session: session.
get("https://connect.garmin.com/modern/proxy/activity-service/activity/"
+ str(activityID)), serviceRecord)
try:
summary_data = summary_resp.json()
except ValueError:
raise APIException("Failure downloading activity summary %s:%s" %
(summary_resp.status_code, summary_resp.text))
stat_map = {}
def mapStat(gcKey, statKey, type, units):
stat_map[gcKey] = {"key": statKey, "attr": type, "units": units}
def applyStats(gc_dict, stats_obj):
for gc_key, stat in stat_map.items():
if gc_key in gc_dict:
value = float(gc_dict[gc_key])
if math.isinf(value):
continue # GC returns the minimum speed as "-Infinity" instead of 0 some times :S
getattr(stats_obj, stat["key"]).update(
ActivityStatistic(stat["units"],
**({
stat["attr"]: value
})))
mapStat("movingDuration", "MovingTime", "value",
ActivityStatisticUnit.Seconds)
mapStat("duration", "TimerTime", "value",
ActivityStatisticUnit.Seconds)
mapStat("distance", "Distance", "value", ActivityStatisticUnit.Meters)
mapStat("maxSpeed", "Speed", "max",
ActivityStatisticUnit.MetersPerSecond)
mapStat("averageSpeed", "Speed", "avg",
ActivityStatisticUnit.MetersPerSecond)
mapStat("calories", "Energy", "value",
ActivityStatisticUnit.Kilocalories)
mapStat("maxHR", "HR", "max", ActivityStatisticUnit.BeatsPerMinute)
mapStat("averageHR", "HR", "avg", ActivityStatisticUnit.BeatsPerMinute)
mapStat("minElevation", "Elevation", "min",
ActivityStatisticUnit.Meters)
mapStat("maxElevation", "Elevation", "max",
ActivityStatisticUnit.Meters)
mapStat("elevationGain", "Elevation", "gain",
ActivityStatisticUnit.Meters)
mapStat("elevationLoss", "Elevation", "loss",
ActivityStatisticUnit.Meters)
mapStat("averageBikeCadence", "Cadence", "avg",
ActivityStatisticUnit.RevolutionsPerMinute)
mapStat("averageCadence", "Cadence", "avg",
ActivityStatisticUnit.StepsPerMinute)
applyStats(summary_data["summaryDTO"], activity.Stats)
laps_resp = self._request_with_reauth(
lambda session: session.
get("https://connect.garmin.com/modern/proxy/activity-service/activity/%s/splits"
% str(activityID)), serviceRecord)
try:
laps_data = laps_resp.json()
except ValueError:
raise APIException(
"Failure downloading activity laps summary %s:%s" %
(laps_resp.status_code, laps_resp.text))
for lap_data in laps_data["lapDTOs"]:
lap = Lap()
if "startTimeGMT" in lap_data:
lap.StartTime = pytz.utc.localize(
datetime.strptime(lap_data["startTimeGMT"],
"%Y-%m-%dT%H:%M:%S.0"))
elapsed_duration = None
if "elapsedDuration" in lap_data:
elapsed_duration = timedelta(
seconds=round(float(lap_data["elapsedDuration"])))
elif "duration" in lap_data:
elapsed_duration = timedelta(
seconds=round(float(lap_data["duration"])))
if lap.StartTime and elapsed_duration:
# Always recalculate end time based on duration, if we have the start time
lap.EndTime = lap.StartTime + elapsed_duration
if not lap.StartTime and lap.EndTime and elapsed_duration:
# Sometimes calculate start time based on duration
lap.StartTime = lap.EndTime - elapsed_duration
if not lap.StartTime or not lap.EndTime:
# Garmin Connect is weird.
raise APIExcludeActivity(
"Activity lap has no BeginTimestamp or EndTimestamp",
user_exception=UserException(UserExceptionType.Corrupt))
applyStats(lap_data, lap.Stats)
activity.Laps.append(lap)
# In Garmin Land, max can be smaller than min for this field :S
if activity.Stats.Power.Max is not None and activity.Stats.Power.Min is not None and activity.Stats.Power.Min > activity.Stats.Power.Max:
activity.Stats.Power.Min = None
def DownloadActivity(self, serviceRecord, activity):
# First, download the summary stats and lap stats
self._downloadActivitySummary(serviceRecord, activity)
if len(activity.Laps) == 1:
activity.Stats = activity.Laps[
0].Stats # They must be identical to pass the verification
if activity.Stationary:
# Nothing else to download
return activity
# https://connect.garmin.com/modern/proxy/download-service/export/tcx/activity/###
activityID = activity.ServiceData["ActivityID"]
res = self._request_with_reauth(
lambda session: session.
get("https://connect.garmin.com/modern/proxy/download-service/export/tcx/activity/{}"
.format(activityID)), serviceRecord)
try:
tcx_data = res.text
activity = TCXIO.Parse(tcx_data.encode('utf-8'), activity)
except ValueError:
raise APIException("Activity data parse error for %s: %s" %
(res.status_code, res.text))
return activity
def UploadActivity(self, serviceRecord, activity):
#/proxy/upload-service-1.1/json/upload/.fit
fit_file = FITIO.Dump(activity)
files = {
"data":
("tap-sync-" + str(os.getpid()) + "-" + activity.UID + ".fit",
fit_file)
}
res = self._request_with_reauth(
lambda session: session.post(
"https://connect.garmin.com/modern/proxy/upload-service/upload/.fit",
files=files,
headers={"nk": "NT"}), serviceRecord)
try:
res = res.json()["detailedImportResult"]
except ValueError:
raise APIException("Bad response during GC upload: %s %s" %
(res.status_code, res.text))
if len(res["successes"]) == 0:
if len(res["failures"]) and len(
res["failures"][0]["messages"]) and res["failures"][0][
"messages"][0]["content"] == "Duplicate activity":
logger.debug("Duplicate")
return # ...cool?
raise APIException("Unable to upload activity %s" % res)
if len(res["successes"]) > 1:
raise APIException(
"Uploaded succeeded, resulting in too many activities")
actid = res["successes"][0]["internalId"]
name = activity.Name # Capture in logs
notes = activity.Notes
# Update activity metadata not included in the FIT file.
metadata_object = {}
if activity.Name and activity.Name.strip():
metadata_object["activityName"] = activity.Name
if activity.Notes and activity.Notes.strip():
metadata_object["description"] = activity.Notes
if activity.Type not in [
ActivityType.Running, ActivityType.Cycling, ActivityType.Other
]:
# Set the legit activity type - whatever it is, it's not supported by the FIT schema
acttype = [
k for k, v in self._reverseActivityMappings.items()
if v == activity.Type
]
if len(acttype) == 0:
raise APIWarning(
"GarminConnect does not support activity type " +
activity.Type)
else:
acttype = acttype[0]
metadata_object["activityTypeDTO"] = {"typeKey": acttype}
if activity.Private:
metadata_object["accessControlRuleDTO"] = {"typeKey": "private"}
if metadata_object:
metadata_object["activityId"] = actid
encoding_headers = {
"Content-Type": "application/json; charset=UTF-8"
} # GC really, really needs this part, otherwise it throws obscure errors like "Invalid signature for signature method HMAC-SHA1"
res = self._request_with_reauth(
lambda session: session.
put("https://connect.garmin.com/proxy/activity-service/activity/"
+ str(actid),
data=json.dumps(metadata_object),
headers=encoding_headers), serviceRecord)
if res.status_code != 204:
raise APIWarning("Unable to set activity metadata - %d %s" %
(res.status_code, res.text))
return actid
def _user_watch_user(self, serviceRecord):
if not serviceRecord.GetConfiguration()["WatchUserKey"]:
user_key = random.choice(
list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))
logger.info("Assigning %s a new watch user %s" %
(serviceRecord.ExternalID, user_key))
serviceRecord.SetConfiguration({"WatchUserKey": user_key})
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[user_key]
else:
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[
serviceRecord.GetConfiguration()["WatchUserKey"]]
def SubscribeToPartialSyncTrigger(self, serviceRecord):
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/request/cpfair
# (the poll worker finishes the connection)
user_name = self._user_watch_user(serviceRecord)["Name"]
logger.info("Requesting connection to %s from %s" %
(user_name, serviceRecord.ExternalID))
self._rate_limit()
resp = self._get_session(record=serviceRecord, skip_cache=True).put(
"https://connect.garmin.com/proxy/userprofile-service/connection/request/%s"
% user_name)
try:
assert resp.status_code == 200
assert resp.json()["requestStatus"] == "Created"
except:
raise APIException(
"Connection request failed with user watch account %s: %s %s" %
(user_name, resp.status_code, resp.text))
else:
serviceRecord.SetConfiguration(
{"WatchConnectionID": resp.json()["id"]})
serviceRecord.SetPartialSyncTriggerSubscriptionState(True)
def UnsubscribeFromPartialSyncTrigger(self, serviceRecord):
# GET http://connect.garmin.com/proxy/userprofile-service/socialProfile/connections to get the ID
# {"fullName":null,"userConnections":[{"userId":5754439,"displayName":"TapiirikAPITEST","fullName":null,"location":null,"profileImageUrlMedium":null,"profileImageUrlSmall":null,"connectionRequestId":1566024,"userConnectionStatus":2,"userRoles":["ROLE_CONNECTUSER","ROLE_FITNESS_USER"],"userPro":false}]}
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/end/1904201
# Unfortunately there's no way to delete a pending request - the poll worker will do this from the other end
active_watch_user = self._user_watch_user(serviceRecord)
session = self._get_session(email=active_watch_user["Username"],
password=active_watch_user["Password"],
skip_cache=True)
if "WatchConnectionID" in serviceRecord.GetConfiguration():
self._rate_limit()
dc_resp = session.put(
"https://connect.garmin.com/modern/proxy/userprofile-service/connection/end/%s"
% serviceRecord.GetConfiguration()["WatchConnectionID"])
if dc_resp.status_code != 200:
raise APIException(
"Error disconnecting user watch accunt %s from %s: %s %s" %
(active_watch_user, serviceRecord.ExternalID,
dc_resp.status_code, dc_resp.text))
serviceRecord.SetConfiguration({
"WatchUserKey": None,
"WatchConnectionID": None
})
serviceRecord.SetPartialSyncTriggerSubscriptionState(False)
else:
# I broke Garmin Connect by having too many connections per account, so I can no longer query the connection list
# All the connection request emails are sitting unopened in an email inbox, though, so I'll be backfilling the IDs from those
raise APIException("Did not store connection ID")
def ShouldForcePartialSyncTrigger(self, serviceRecord):
# The poll worker can't see private activities.
return serviceRecord.GetConfiguration()["sync_private"]
def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/modern/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(
GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
logger.debug("Initiating session for watch user %s",
watch_user["Username"])
sess_args = {
"email": watch_user["Username"],
"password": watch_user["Password"]
}
# These seems to fail with a 500 (talkking about a timeout) the first time, so keep trying.
SERVER_ERROR_RETRIES = 10
PAGE_SIZE = 100
TOTAL_SIZE = 1000
# Then, check for users with new activities
watch_activities = []
for i in range(1, TOTAL_SIZE, PAGE_SIZE):
for x in range(SERVER_ERROR_RETRIES):
logger.debug("Fetching activity list from %d - attempt %d", i,
x)
watch_activities_resp = self._request_with_reauth(
lambda session: session.get(
"https://connect.garmin.com/modern/proxy/activitylist-service/activities/subscriptionFeed",
params={
"limit": PAGE_SIZE,
"start": i
}), **sess_args)
if watch_activities_resp.status_code != 500:
break
try:
watch_activities += watch_activities_resp.json(
)["activityList"]
except ValueError:
raise Exception("Could not parse new activities list: %s %s" %
(watch_activities_resp.status_code,
watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"])
for x in watch_activities]
active_user_pairs.sort(
key=lambda x: x[1]
) # Highest IDs last (so they make it into the dict, supplanting lower IDs where appropriate)
active_users = dict(active_user_pairs)
active_user_recs = [
ServiceRecord(x) for x in db.connections.find(
{
"ExternalID": {
"$in": list(active_users.keys())
},
"Service": "garminconnect"
}, {
"Config": 1,
"ExternalID": 1,
"Service": 1
})
]
if len(active_user_recs) != len(active_users.keys()):
logger.warning("Mismatch %d records found for %d active users" %
(len(active_user_recs), len(active_users.keys())))
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration(
)["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec.ExternalID)
active_user_rec.SetConfiguration({
"WatchUserLastID": this_active_id,
"WatchUserKey": watch_user_key
})
for x in range(SERVER_ERROR_RETRIES):
self._rate_limit()
logger.debug("Fetching connection request list - attempt %d", x)
pending_connections_resp = self._request_with_reauth(
lambda session: session.
get("https://connect.garmin.com/modern/proxy/userprofile-service/connection/pending"
), **sess_args)
if pending_connections_resp.status_code != 500:
break
try:
pending_connections = pending_connections_resp.json()
except ValueError:
logger.error("Could not parse pending connection requests: %s %s" %
(pending_connections_resp.status_code,
pending_connections_resp.text))
else:
valid_pending_connections_external_ids = [
x["ExternalID"] for x in db.connections.find(
{
"Service": "garminconnect",
"ExternalID": {
"$in":
[x["displayName"] for x in pending_connections]
}
}, {"ExternalID": 1})
]
logger.info(
"Accepting %d, denying %d connection requests for %s" %
(len(valid_pending_connections_external_ids),
len(pending_connections) -
len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect[
"displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = self._request_with_reauth(
lambda session: session.
put("https://connect.garmin.com/modern/proxy/userprofile-service/connection/accept/%s"
% pending_connect["connectionRequestId"]),
**sess_args)
if connect_resp.status_code != 200:
logger.error(
"Error accepting request on watch account %s: %s %s"
% (watch_user["Name"], connect_resp.status_code,
connect_resp.text))
else:
self._rate_limit()
self._request_with_reauth(
lambda session: session.
put("https://connect.garmin.com/modern/proxy/userprofile-service/connection/decline/%s"
% pending_connect["connectionRequestId"]),
**sess_args)
return to_sync_ids
def RevokeAuthorization(self, serviceRecord):
# nothing to do here...
pass
def DeleteCachedData(self, serviceRecord):
# nothing cached...
pass
def DeleteActivity(self, serviceRecord, uploadId):
session = self._get_session(record=serviceRecord)
self._rate_limit()
del_res = session.delete(
"https://connect.garmin.com/modern/proxy/activity-service/activity/%d"
% uploadId)
del_res.raise_for_status()
class GarminConnectService(ServiceBase):
ID = "garminconnect"
DisplayName = "Garmin Connect"
DisplayAbbreviation = "GC"
AuthenticationType = ServiceAuthenticationType.UsernamePassword
RequiresExtendedAuthorizationDetails = True
PartialSyncRequiresTrigger = True
PartialSyncTriggerPollInterval = timedelta(minutes=10)
PartialSyncTriggerPollMultiple = len(
GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys())
ConfigurationDefaults = {"WatchUserKey": None, "WatchUserLastID": 0}
_activityMappings = {
"running": ActivityType.Running,
"cycling": ActivityType.Cycling,
"mountain_biking": ActivityType.MountainBiking,
"walking": ActivityType.Walking,
"hiking": ActivityType.Hiking,
"resort_skiing_snowboarding": ActivityType.DownhillSkiing,
"cross_country_skiing": ActivityType.CrossCountrySkiing,
"skate_skiing":
ActivityType.CrossCountrySkiing, # Well, it ain't downhill?
"backcountry_skiing_snowboarding":
ActivityType.CrossCountrySkiing, # ish
"skating": ActivityType.Skating,
"swimming": ActivityType.Swimming,
"rowing": ActivityType.Rowing,
"elliptical": ActivityType.Elliptical,
"fitness_equipment": ActivityType.Gym,
"all": ActivityType.Other # everything will eventually resolve to this
}
_reverseActivityMappings = { # Removes ambiguities when mapping back to their activity types
"running": ActivityType.Running,
"cycling": ActivityType.Cycling,
"mountain_biking": ActivityType.MountainBiking,
"walking": ActivityType.Walking,
"hiking": ActivityType.Hiking,
"resort_skiing_snowboarding": ActivityType.DownhillSkiing,
"cross_country_skiing": ActivityType.CrossCountrySkiing,
"skating": ActivityType.Skating,
"swimming": ActivityType.Swimming,
"rowing": ActivityType.Rowing,
"elliptical": ActivityType.Elliptical,
"fitness_equipment": ActivityType.Gym,
"other": ActivityType.Other # I guess? (vs. "all" that is)
}
SupportedActivities = list(_activityMappings.values())
SupportsHR = SupportsCadence = True
_sessionCache = SessionCache(lifetime=timedelta(minutes=30),
freshen_on_get=True)
_unitMap = {
"mph": ActivityStatisticUnit.MilesPerHour,
"kph": ActivityStatisticUnit.KilometersPerHour,
"hmph": ActivityStatisticUnit.HectometersPerHour,
"hydph": ActivityStatisticUnit.HundredYardsPerHour,
"celcius": ActivityStatisticUnit.DegreesCelcius,
"fahrenheit": ActivityStatisticUnit.DegreesFahrenheit,
"mile": ActivityStatisticUnit.Miles,
"kilometer": ActivityStatisticUnit.Kilometers,
"foot": ActivityStatisticUnit.Feet,
"meter": ActivityStatisticUnit.Meters,
"yard": ActivityStatisticUnit.Yards,
"kilocalorie": ActivityStatisticUnit.Kilocalories,
"bpm": ActivityStatisticUnit.BeatsPerMinute,
"stepsPerMinute": ActivityStatisticUnit.StepsPerMinute,
"rpm": ActivityStatisticUnit.RevolutionsPerMinute,
"watt": ActivityStatisticUnit.Watts
}
def __init__(self):
cachedHierarchy = cachedb.gc_type_hierarchy.find_one()
if not cachedHierarchy:
rawHierarchy = requests.get(
"http://connect.garmin.com/proxy/activity-service-1.2/json/activity_types"
).text
self._activityHierarchy = json.loads(rawHierarchy)["dictionary"]
cachedb.gc_type_hierarchy.insert({"Hierarchy": rawHierarchy})
else:
self._activityHierarchy = json.loads(
cachedHierarchy["Hierarchy"])["dictionary"]
rate_lock_path = "/tmp/gc_rate.%s.lock" % HTTP_SOURCE_ADDR
# Ensure the rate lock file exists (...the easy way)
open(rate_lock_path, "a").close()
self._rate_lock = open(rate_lock_path, "r+")
def _rate_limit(self):
import fcntl, struct, time
min_period = 1 # I appear to been banned from Garmin Connect while determining this.
print("Waiting for lock")
fcntl.flock(self._rate_lock, fcntl.LOCK_EX)
try:
print("Have lock")
self._rate_lock.seek(0)
last_req_start = self._rate_lock.read()
if not last_req_start:
last_req_start = 0
else:
last_req_start = float(last_req_start)
wait_time = max(0, min_period - (time.time() - last_req_start))
time.sleep(wait_time)
self._rate_lock.seek(0)
self._rate_lock.write(str(time.time()))
self._rate_lock.flush()
print("Rate limited for %f" % wait_time)
finally:
fcntl.flock(self._rate_lock, fcntl.LOCK_UN)
def _get_cookies(self, record=None, email=None, password=None):
from tapiriik.auth.credential_storage import CredentialStore
cached = self._sessionCache.Get(record.ExternalID if record else email)
if cached:
return cached
if record:
# longing for C style overloads...
password = CredentialStore.Decrypt(
record.ExtendedAuthorization["Password"])
email = CredentialStore.Decrypt(
record.ExtendedAuthorization["Email"])
self._rate_limit()
gcPreResp = requests.get("http://connect.garmin.com/",
allow_redirects=False)
# New site gets this redirect, old one does not
if gcPreResp.status_code == 200:
self._rate_limit()
gcPreResp = requests.get("https://connect.garmin.com/signin",
allow_redirects=False)
req_count = int(
re.search("j_id(\d+)", gcPreResp.text).groups(1)[0])
params = {
"login": "******",
"login:loginUsernameField": email,
"login:password": password,
"login:signInButton": "Sign In"
}
auth_retries = 3 # Did I mention Garmin Connect is silly?
for retries in range(auth_retries):
params["javax.faces.ViewState"] = "j_id%d" % req_count
req_count += 1
self._rate_limit()
resp = requests.post("https://connect.garmin.com/signin",
data=params,
allow_redirects=False,
cookies=gcPreResp.cookies)
if resp.status_code >= 500 and resp.status_code < 600:
raise APIException("Remote API failure")
if resp.status_code != 302: # yep
if "errorMessage" in resp.text:
if retries < auth_retries - 1:
time.sleep(1)
continue
else:
raise APIException(
"Invalid login",
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
else:
raise APIException("Mystery login error %s" %
resp.text)
break
elif gcPreResp.status_code == 302:
# JSIG CAS, cool I guess.
# Not quite OAuth though, so I'll continue to collect raw credentials.
# Commented stuff left in case this ever breaks because of missing parameters...
data = {
"username": email,
"password": password,
"_eventId": "submit",
"embed": "true",
# "displayNameRequired": "false"
}
params = {
"service": "http://connect.garmin.com/post-auth/login",
# "redirectAfterAccountLoginUrl": "http://connect.garmin.com/post-auth/login",
# "redirectAfterAccountCreationUrl": "http://connect.garmin.com/post-auth/login",
# "webhost": "olaxpw-connect00.garmin.com",
"clientId": "GarminConnect",
# "gauthHost": "https://sso.garmin.com/sso",
# "rememberMeShown": "true",
# "rememberMeChecked": "false",
"consumeServiceTicket": "false",
# "id": "gauth-widget",
# "embedWidget": "false",
# "cssUrl": "https://static.garmincdn.com/com.garmin.connect/ui/src-css/gauth-custom.css",
# "source": "http://connect.garmin.com/en-US/signin",
# "createAccountShown": "true",
# "openCreateAccount": "false",
# "usernameShown": "true",
# "displayNameShown": "false",
# "initialFocus": "true",
# "locale": "en"
}
# I may never understand what motivates people to mangle a perfectly good protocol like HTTP in the ways they do...
preResp = requests.get("https://sso.garmin.com/sso/login",
params=params)
if preResp.status_code != 200:
raise APIException("SSO prestart error %s %s" %
(preResp.status_code, preResp.text))
data["lt"] = re.search("name=\"lt\"\s+value=\"([^\"]+)\"",
preResp.text).groups(1)[0]
ssoResp = requests.post("https://sso.garmin.com/sso/login",
params=params,
data=data,
allow_redirects=False,
cookies=preResp.cookies)
if ssoResp.status_code != 200:
raise APIException("SSO error %s %s" %
(ssoResp.status_code, ssoResp.text))
ticket_match = re.search("ticket=([^']+)'", ssoResp.text)
if not ticket_match:
raise APIException("Invalid login",
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
ticket = ticket_match.groups(1)[0]
# ...AND WE'RE NOT DONE YET!
self._rate_limit()
gcRedeemResp1 = requests.get(
"http://connect.garmin.com/post-auth/login",
params={"ticket": ticket},
allow_redirects=False,
cookies=gcPreResp.cookies)
if gcRedeemResp1.status_code != 302:
raise APIException(
"GC redeem 1 error %s %s" %
(gcRedeemResp1.status_code, gcRedeemResp1.text))
self._rate_limit()
gcRedeemResp2 = requests.get(gcRedeemResp1.headers["location"],
cookies=gcPreResp.cookies,
allow_redirects=False)
if gcRedeemResp2.status_code != 302:
raise APIException(
"GC redeem 2 error %s %s" %
(gcRedeemResp2.status_code, gcRedeemResp2.text))
else:
raise APIException("Unknown GC prestart response %s %s" %
(gcPreResp.status_code, gcPreResp.text))
self._sessionCache.Set(record.ExternalID if record else email,
gcPreResp.cookies)
return gcPreResp.cookies
def WebInit(self):
self.UserAuthorizationURL = WEB_ROOT + reverse(
"auth_simple", kwargs={"service": self.ID})
def Authorize(self, email, password):
from tapiriik.auth.credential_storage import CredentialStore
cookies = self._get_cookies(email=email, password=password)
self._rate_limit()
username = requests.get("http://connect.garmin.com/user/username",
cookies=cookies).json()["username"]
if not len(username):
raise APIException("Unable to retrieve username",
block=True,
user_exception=UserException(
UserExceptionType.Authorization,
intervention_required=True))
return (username, {}, {
"Email": CredentialStore.Encrypt(email),
"Password": CredentialStore.Encrypt(password)
})
def _resolveActivityType(self, act_type):
# Mostly there are two levels of a hierarchy, so we don't really need this as the parent is included in the listing.
# But maybe they'll change that some day?
while act_type not in self._activityMappings:
try:
act_type = [
x["parent"]["key"] for x in self._activityHierarchy
if x["key"] == act_type
][0]
except IndexError:
raise ValueError(
"Activity type not found in activity hierarchy")
return self._activityMappings[act_type]
def DownloadActivityList(self, serviceRecord, exhaustive=False):
#http://connect.garmin.com/proxy/activity-search-service-1.0/json/activities?&start=0&limit=50
cookies = self._get_cookies(record=serviceRecord)
page = 1
pageSz = 100
activities = []
exclusions = []
while True:
logger.debug("Req with " + str({
"start": (page - 1) * pageSz,
"limit": pageSz
}))
self._rate_limit()
res = requests.get(
"http://connect.garmin.com/proxy/activity-search-service-1.0/json/activities",
params={
"start": (page - 1) * pageSz,
"limit": pageSz
},
cookies=cookies)
try:
res = res.json()["results"]
except ValueError:
res_txt = res.text # So it can capture in the log message
raise APIException("Parse failure in GC list resp: %s" %
res.status_code)
if "activities" not in res:
break # No activities on this page - empty account.
for act in res["activities"]:
act = act["activity"]
if "sumDistance" not in act:
exclusions.append(
APIExcludeActivity("No distance",
activityId=act["activityId"],
userException=UserException(
UserExceptionType.Corrupt)))
continue
activity = UploadedActivity()
if "sumSampleCountSpeed" not in act and "sumSampleCountTimestamp" not in act: # Don't really know why sumSampleCountTimestamp doesn't appear in swim activities - they're definitely timestamped...
activity.Stationary = True
else:
activity.Stationary = False
try:
activity.TZ = pytz.timezone(act["activityTimeZone"]["key"])
except pytz.exceptions.UnknownTimeZoneError:
activity.TZ = pytz.FixedOffset(
float(act["activityTimeZone"]["offset"]) * 60)
logger.debug("Name " + act["activityName"]["value"] + ":")
if len(act["activityName"]["value"].strip(
)) and act["activityName"][
"value"] != "Untitled": # This doesn't work for internationalized accounts, oh well.
activity.Name = act["activityName"]["value"]
if len(act["activityDescription"]["value"].strip()):
activity.Notes = act["activityDescription"]["value"]
# beginTimestamp/endTimestamp is in UTC
activity.StartTime = pytz.utc.localize(
datetime.utcfromtimestamp(
float(act["beginTimestamp"]["millis"]) / 1000))
if "sumElapsedDuration" in act:
activity.EndTime = activity.StartTime + timedelta(
0, round(float(act["sumElapsedDuration"]["value"])))
elif "sumDuration" in act:
activity.EndTime = activity.StartTime + timedelta(
minutes=float(act["sumDuration"]
["minutesSeconds"].split(":")[0]),
seconds=float(act["sumDuration"]
["minutesSeconds"].split(":")[1]))
else:
activity.EndTime = pytz.utc.localize(
datetime.utcfromtimestamp(
float(act["endTimestamp"]["millis"]) / 1000))
logger.debug("Activity s/t " + str(activity.StartTime) +
" on page " + str(page))
activity.AdjustTZ()
# TODO: fix the distance stats to account for the fact that this incorrectly reported km instead of meters for the longest time.
activity.Stats.Distance = ActivityStatistic(
self._unitMap[act["sumDistance"]["uom"]],
value=float(act["sumDistance"]["value"]))
def mapStat(gcKey, statKey, type, useSourceUnits=False):
nonlocal activity, act
if gcKey in act:
value = float(act[gcKey]["value"])
if math.isinf(value):
return # GC returns the minimum speed as "-Infinity" instead of 0 some times :S
activity.Stats.__dict__[statKey].update(
ActivityStatistic(self._unitMap[act[gcKey]["uom"]],
**({
type: value
})))
if useSourceUnits:
activity.Stats.__dict__[
statKey] = activity.Stats.__dict__[
statKey].asUnits(
self._unitMap[act[gcKey]["uom"]])
if "sumMovingDuration" in act:
activity.Stats.MovingTime = ActivityStatistic(
ActivityStatisticUnit.Time,
value=timedelta(
seconds=float(act["sumMovingDuration"]["value"])))
if "sumDuration" in act:
activity.Stats.TimerTime = ActivityStatistic(
ActivityStatisticUnit.Time,
value=timedelta(
minutes=float(act["sumDuration"]
["minutesSeconds"].split(":")[0]),
seconds=float(act["sumDuration"]
["minutesSeconds"].split(":")[1])))
mapStat(
"minSpeed", "Speed", "min", useSourceUnits=True
) # We need to suppress conversion here, so we can fix the pace-speed issue below
mapStat("maxSpeed", "Speed", "max", useSourceUnits=True)
mapStat("weightedMeanSpeed",
"Speed",
"avg",
useSourceUnits=True)
mapStat("minAirTemperature", "Temperature", "min")
mapStat("maxAirTemperature", "Temperature", "max")
mapStat("weightedMeanAirTemperature", "Temperature", "avg")
mapStat("sumEnergy", "Energy", "value")
mapStat("maxHeartRate", "HR", "max")
mapStat("weightedMeanHeartRate", "HR", "avg")
mapStat("maxRunCadence", "RunCadence", "max")
mapStat("weightedMeanRunCadence", "RunCadence", "avg")
mapStat("maxBikeCadence", "Cadence", "max")
mapStat("weightedMeanBikeCadence", "Cadence", "avg")
mapStat("minPower", "Power", "min")
mapStat("maxPower", "Power", "max")
mapStat("weightedMeanPower", "Power", "avg")
mapStat("minElevation", "Elevation", "min")
mapStat("maxElevation", "Elevation", "max")
mapStat("gainElevation", "Elevation", "gain")
mapStat("lossElevation", "Elevation", "loss")
# In Garmin Land, max can be smaller than min for this field :S
if activity.Stats.Power.Max is not None and activity.Stats.Power.Min is not None and activity.Stats.Power.Min > activity.Stats.Power.Max:
activity.Stats.Power.Min = None
# To get it to match what the user sees in GC.
if activity.Stats.RunCadence.Max is not None:
activity.Stats.RunCadence.Max *= 2
if activity.Stats.RunCadence.Average is not None:
activity.Stats.RunCadence.Average *= 2
# GC incorrectly reports pace measurements as kph/mph when they are in fact in min/km or min/mi
if "minSpeed" in act:
if ":" in act["minSpeed"][
"withUnitAbbr"] and activity.Stats.Speed.Min:
activity.Stats.Speed.Min = 60 / activity.Stats.Speed.Min
if "maxSpeed" in act:
if ":" in act["maxSpeed"][
"withUnitAbbr"] and activity.Stats.Speed.Max:
activity.Stats.Speed.Max = 60 / activity.Stats.Speed.Max
if "weightedMeanSpeed" in act:
if ":" in act["weightedMeanSpeed"][
"withUnitAbbr"] and activity.Stats.Speed.Average:
activity.Stats.Speed.Average = 60 / activity.Stats.Speed.Average
# Similarly, they do weird stuff with HR at times - %-of-max and zones
# ...and we can't just fix these, so we have to calculate it after the fact (blegh)
recalcHR = False
if "maxHeartRate" in act:
if "%" in act["maxHeartRate"]["withUnitAbbr"] or "z" in act[
"maxHeartRate"]["withUnitAbbr"]:
activity.Stats.HR.Max = None
recalcHR = True
if "weightedMeanHeartRate" in act:
if "%" in act["weightedMeanHeartRate"][
"withUnitAbbr"] or "z" in act[
"weightedMeanHeartRate"]["withUnitAbbr"]:
activity.Stats.HR.Average = None
recalcHR = True
activity.Type = self._resolveActivityType(
act["activityType"]["key"])
activity.CalculateUID()
activity.ServiceData = {
"ActivityID": act["activityId"],
"RecalcHR": recalcHR
}
activities.append(activity)
logger.debug("Finished page " + str(page) + " of " +
str(res["search"]["totalPages"]))
if not exhaustive or int(res["search"]["totalPages"]) == page:
break
else:
page += 1
return activities, exclusions
def DownloadActivity(self, serviceRecord, activity):
#http://connect.garmin.com/proxy/activity-service-1.1/tcx/activity/#####?full=true
activityID = activity.ServiceData["ActivityID"]
cookies = self._get_cookies(record=serviceRecord)
self._rate_limit()
res = requests.get(
"http://connect.garmin.com/proxy/activity-service-1.1/tcx/activity/"
+ str(activityID) + "?full=true",
cookies=cookies)
try:
TCXIO.Parse(res.content, activity)
except ValueError as e:
raise APIExcludeActivity("TCX parse error " + str(e),
userException=UserException(
UserExceptionType.Corrupt))
if activity.ServiceData["RecalcHR"]:
logger.debug("Recalculating HR")
avgHR, maxHR = ActivityStatisticCalculator.CalculateAverageMaxHR(
activity)
activity.Stats.HR.coalesceWith(
ActivityStatistic(ActivityStatisticUnit.BeatsPerMinute,
max=maxHR,
avg=avgHR))
if len(activity.Laps) == 1:
activity.Laps[0].Stats.update(
activity.Stats
) # I trust Garmin Connect's stats more than whatever shows up in the TCX
activity.Stats = activity.Laps[
0].Stats # They must be identical to pass the verification
if activity.Stats.Temperature.Min is not None or activity.Stats.Temperature.Max is not None or activity.Stats.Temperature.Average is not None:
logger.debug("Retrieving additional temperature data")
# TCX doesn't have temperature, for whatever reason...
self._rate_limit()
res = requests.get(
"http://connect.garmin.com/proxy/activity-service-1.1/gpx/activity/"
+ str(activityID) + "?full=true",
cookies=cookies)
try:
temp_act = GPXIO.Parse(res.content,
suppress_validity_errors=True)
except ValueError as e:
pass
else:
logger.debug("Merging additional temperature data")
full_waypoints = activity.GetFlatWaypoints()
temp_waypoints = temp_act.GetFlatWaypoints()
merge_idx = 0
for x in range(len(temp_waypoints)):
while full_waypoints[merge_idx].Timestamp < temp_waypoints[
x].Timestamp and merge_idx < len(
full_waypoints) - 1:
merge_idx += 1
full_waypoints[merge_idx].Temp = temp_waypoints[x].Temp
return activity
def UploadActivity(self, serviceRecord, activity):
#/proxy/upload-service-1.1/json/upload/.fit
fit_file = FITIO.Dump(activity)
files = {
"data":
("tap-sync-" + str(os.getpid()) + "-" + activity.UID + ".fit",
fit_file)
}
cookies = self._get_cookies(record=serviceRecord)
self._rate_limit()
res = requests.post(
"http://connect.garmin.com/proxy/upload-service-1.1/json/upload/.tcx",
files=files,
cookies=cookies)
res = res.json()["detailedImportResult"]
if len(res["successes"]) == 0:
raise APIException("Unable to upload activity")
if len(res["successes"]) > 1:
raise APIException(
"Uploaded succeeded, resulting in too many activities")
actid = res["successes"][0]["internalId"]
name = activity.Name # Capture in logs
notes = activity.Notes
encoding_headers = {
"Content-Type": "application/x-www-form-urlencoded; charset=UTF-8"
} # GC really, really needs this part, otherwise it throws obscure errors like "Invalid signature for signature method HMAC-SHA1"
warnings = []
try:
if activity.Name and activity.Name.strip():
self._rate_limit()
res = requests.post(
"http://connect.garmin.com/proxy/activity-service-1.2/json/name/"
+ str(actid),
data=urllib.parse.urlencode({
"value": activity.Name
}).encode("UTF-8"),
cookies=cookies,
headers=encoding_headers)
try:
res = res.json()
except:
raise APIWarning("Activity name request failed - %s" %
res.text)
if "display" not in res or res["display"][
"value"] != activity.Name:
raise APIWarning("Unable to set activity name")
except APIWarning as e:
warnings.append(e)
try:
if activity.Notes and activity.Notes.strip():
self._rate_limit()
res = requests.post(
"https://connect.garmin.com/proxy/activity-service-1.2/json/description/"
+ str(actid),
data=urllib.parse.urlencode({
"value": activity.Notes
}).encode("UTF-8"),
cookies=cookies,
headers=encoding_headers)
try:
res = res.json()
except:
raise APIWarning("Activity notes request failed - %s" %
res.text)
if "display" not in res or res["display"][
"value"] != activity.Notes:
raise APIWarning("Unable to set activity notes")
except APIWarning as e:
warnings.append(e)
try:
if activity.Type not in [
ActivityType.Running, ActivityType.Cycling,
ActivityType.Other
]:
# Set the legit activity type - whatever it is, it's not supported by the TCX schema
acttype = [
k for k, v in self._reverseActivityMappings.items()
if v == activity.Type
]
if len(acttype) == 0:
raise APIWarning(
"GarminConnect does not support activity type " +
activity.Type)
else:
acttype = acttype[0]
self._rate_limit()
res = requests.post(
"https://connect.garmin.com/proxy/activity-service-1.2/json/type/"
+ str(actid),
data={"value": acttype},
cookies=cookies)
res = res.json()
if "activityType" not in res or res["activityType"][
"key"] != acttype:
raise APIWarning("Unable to set activity type")
except APIWarning as e:
warnings.append(e)
if len(warnings):
raise APIWarning(str(warnings)) # Meh
return actid
def _user_watch_user(self, serviceRecord):
if not serviceRecord.GetConfiguration()["WatchUserKey"]:
user_key = random.choice(
list(GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))
logger.info("Assigning %s a new watch user %s" %
(serviceRecord.ExternalID, user_key))
serviceRecord.SetConfiguration({"WatchUserKey": user_key})
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[user_key]
else:
return GARMIN_CONNECT_USER_WATCH_ACCOUNTS[
serviceRecord.GetConfiguration()["WatchUserKey"]]
def SubscribeToPartialSyncTrigger(self, serviceRecord):
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/request/cpfair
# (the poll worker finishes the connection)
user_name = self._user_watch_user(serviceRecord)["Name"]
logger.info("Requesting connection to %s from %s" %
(user_name, serviceRecord.ExternalID))
self._rate_limit()
resp = requests.put(
"http://connect.garmin.com/proxy/userprofile-service/connection/request/%s"
% user_name,
cookies=self._get_cookies(record=serviceRecord))
try:
assert resp.status_code == 200
assert resp.json()["requestStatus"] == "Created"
except:
raise APIException(
"Connection request failed with user watch account %s: %s %s" %
(user_name, resp.status_code, resp.text))
serviceRecord.SetPartialSyncTriggerSubscriptionState(True)
def UnsubscribeFromPartialSyncTrigger(self, serviceRecord):
# GET http://connect.garmin.com/proxy/userprofile-service/socialProfile/connections to get the ID
# {"fullName":null,"userConnections":[{"userId":5754439,"displayName":"TapiirikAPITEST","fullName":null,"location":null,"profileImageUrlMedium":null,"profileImageUrlSmall":null,"connectionRequestId":1566024,"userConnectionStatus":2,"userRoles":["ROLE_CONNECTUSER","ROLE_FITNESS_USER"],"userPro":false}]}
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/end/1904201
# Unfortunately there's no way to delete a pending request - the poll worker will do this from the other end
active_watch_user = self._user_watch_user(serviceRecord)
cookies = self._get_cookies(email=active_watch_user["Username"],
password=active_watch_user["Password"])
self._rate_limit()
connections = requests.get(
"http://connect.garmin.com/proxy/userprofile-service/socialProfile/connections",
cookies=cookies).json()
for connection in connections["userConnections"]:
if connection["displayName"] == serviceRecord.ExternalID:
self._rate_limit()
dc_resp = requests.put(
"http://connect.garmin.com/proxy/userprofile-service/connection/end/%s"
% connection["connectionRequestId"],
cookies=cookies)
if dc_resp.status_code != 200:
raise APIException(
"Error disconnecting user watch accunt %s from %s: %s %s"
% (active_watch_user, connection["displayName"],
dc_resp.status_code, dc_resp.text))
serviceRecord.SetConfiguration({"WatchUserKey": None})
serviceRecord.SetPartialSyncTriggerSubscriptionState(False)
def PollPartialSyncTrigger(self, multiple_index):
# TODO: ensure the appropriate users are connected
# GET http://connect.garmin.com/proxy/userprofile-service/connection/pending to get ID
# [{"userId":6244126,"displayName":"tapiriik-sync-ulukhaktok","fullName":"tapiriik sync ulukhaktok","profileImageUrlSmall":null,"connectionRequestId":1904086,"requestViewed":true,"userRoles":["ROLE_CONNECTUSER"],"userPro":false}]
# PUT http://connect.garmin.com/proxy/userprofile-service/connection/accept/1904086
# ...later...
# GET http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10
# First, accept any pending connections
watch_user_key = sorted(list(
GARMIN_CONNECT_USER_WATCH_ACCOUNTS.keys()))[multiple_index]
watch_user = GARMIN_CONNECT_USER_WATCH_ACCOUNTS[watch_user_key]
cookies = self._get_cookies(email=watch_user["Username"],
password=watch_user["Password"])
self._rate_limit()
pending_connections_resp = requests.get(
"http://connect.garmin.com/proxy/userprofile-service/connection/pending",
cookies=cookies)
try:
pending_connections = pending_connections_resp.json()
except ValueError:
raise Exception(
"Could not parse pending connection requests: %s %s" %
(pending_connections_resp.status_code,
pending_connections_resp.text))
valid_pending_connections_external_ids = [
x["ExternalID"] for x in db.connections.find(
{
"Service": "garminconnect",
"ExternalID": {
"$in": [x["displayName"] for x in pending_connections]
}
}, {"ExternalID": 1})
]
logger.info(
"Accepting %d, denying %d connection requests for %s" %
(len(valid_pending_connections_external_ids),
len(pending_connections) -
len(valid_pending_connections_external_ids), watch_user_key))
for pending_connect in pending_connections:
if pending_connect[
"displayName"] in valid_pending_connections_external_ids:
self._rate_limit()
connect_resp = requests.put(
"http://connect.garmin.com/proxy/userprofile-service/connection/accept/%s"
% pending_connect["connectionRequestId"],
cookies=cookies)
if connect_resp.status_code != 200:
raise APIException(
"Error accepting request on watch account %s: %s %s" %
(watch_user["Name"], connect_resp.status_code,
connect_resp.text))
else:
self._rate_limit()
ignore_resp = requests.put(
"http://connect.garmin.com/proxy/userprofile-service/connection/decline/%s"
% pending_connect["connectionRequestId"],
cookies=cookies)
# Then, check for users with new activities
self._rate_limit()
watch_activities_resp = requests.get(
"http://connect.garmin.com/proxy/activitylist-service/activities/comments/subscriptionFeed?start=1&limit=10",
cookies=cookies)
try:
watch_activities = watch_activities_resp.json()
except ValueError:
raise Exception("Could not parse new activities list: %s %s" %
(watch_activities_resp.status_code,
watch_activities_resp.text))
active_user_pairs = [(x["ownerDisplayName"], x["activityId"])
for x in watch_activities["activityList"]]
active_user_pairs.sort(key=lambda x: x[1],
reverse=True) # Highest IDs first
active_users = dict(active_user_pairs)
active_user_recs = [
ServiceRecord(x) for x in db.connections.find(
{
"Config.WatchUserKey": watch_user_key,
"ExternalID": {
"$in": list(active_users.keys())
}
}, {
"Config": 1,
"ExternalID": 1,
"Service": 1
})
]
to_sync_ids = []
for active_user_rec in active_user_recs:
last_active_id = active_user_rec.GetConfiguration(
)["WatchUserLastID"]
this_active_id = active_users[active_user_rec.ExternalID]
if this_active_id > last_active_id:
to_sync_ids.append(active_user_rec._id)
active_user_rec.SetConfiguration(
{"WatchUserLastID": this_active_id})
return to_sync_ids
def RevokeAuthorization(self, serviceRecord):
# nothing to do here...
pass
def DeleteCachedData(self, serviceRecord):
# nothing cached...
pass