def run(self):
# parameters
Sim.scheduler.reset()
# setup network
net = Network('experiment.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=self.window,
fast_retransmit=self.fast_retransmit,
measure=True)
TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=self.window,
fast_retransmit=self.fast_retransmit,
measure=True)
# send a file
with open(self.filename, 'rb') as f:
while True:
data = f.read()
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
Sim.scheduler.run()
result_file = open("results.txt", "r")
results = result_file.read()
result_file.close()
f = open("experiment.csv", "a")
f.write(str(self.window) + "," + results + "\n")
def run(self):
# parameters
Sim.scheduler.reset()
Sim.set_debug('AppHandler')
Sim.set_debug('TCP')
# setup network
net = Network('network.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=self.window,
fast_retransmit=self.fast_retransmit)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=self.window,
fast_retransmit=self.fast_retransmit)
# send a file
with open(self.filename, 'rb') as f:
while True:
data = f.read(10000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# run the simulation
Sim.scheduler.run()
if self.print_queueing_delay:
print('average queueing delay: {}'.format(
c2.total_queueing_delay / c2.total_packets_received))
def __init__(self, ipAddress):
self.sq = Queue()
self.rq = Queue()
self.struct = Struct('BBbB') #command, selector, value, checksum
self.sender = TCP(isServer=False,
isSender=True,
host=ipAddress,
port=1234,
q=self.sq)
self.receiver = TCP(isServer=False,
isSender=False,
host=ipAddress,
port=5678,
q=self.rq)
def run(self):
# parameters
Sim.scheduler.reset()
Sim.set_debug('AppHandler')
Sim.set_debug('TCP')
Sim.set_debug('Plot')
# setup network
net = Network('basic.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=self.window)
TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=self.window)
# send a file
with open(self.filename, 'rb') as f:
while True:
data = f.read()
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
Sim.scheduler.run()
def run(self):
# parameters
Sim.scheduler.reset()
Sim.set_debug('AppHandler')
Sim.set_debug('TCP')
Sim.set_debug('Plot')
# setup network
net = Network('./networks/one-hop.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=self.window,
drop=self.drops)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=self.window,
drop=self.drops)
# setup fast retransmit
if self.fast_retransmit:
c1.set_fast_retransmit_enabled(True)
c2.set_fast_retransmit_enabled(True)
# send a file
with open(self.filename, 'rb') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# run the simulation
Sim.scheduler.run()
def __init__(self, camera, pnts_pattern):
self.rep = Representation()
self.h = Homography(pnts_pattern)
self.tcp = TCP()
self.a = Angle()
self.camera = camera
self.hom = np.zeros((3, 3))
self.inv_hom = np.zeros((3, 3))
self.Frame = np.zeros((3, 3))
self.inv_Frame = np.zeros((3, 3))
self.hom_final_camera = np.zeros((3, 3))
def main(url):
parsed = urlparse(url)
# exit on unsupported application protocol
if parsed.scheme.lower() != 'http':
print '"' + parsed.scheme + '"' + ' scheme address is not supported'
sys.exit()
host = parsed.netloc
filename = getFilename(parsed.path)
request = getRequest(parsed.path, host)
print filename
print request
# Initiate the download
startTime = time.time()
sock = TCP()
sock.connect(host)
sock.sendGet(request)
# Start the retrieve
filedata = sock.transmission()
print filedata
# if found it is a non-200 packet, exit
if not filedata.startswith("HTTP/1.1 200"):
print ('Non-200 HTTP status code is not supported')
sys.exit(0)
# remove the HTTP header:
pos = filedata.find("\r\n\r\n")
if pos > -1:
pos += 4
filedata = filedata[pos:]
endTime = time.time()
# save file to disk
saveFile(filename, filedata)
print len(filedata),
print 'Bytes received'
#timecost = '%.2g' % (endTime - startTime)
#print timecost,
#print 'seconds passed. Average speed:',
#throughput = '%f' % (len(filedata) / float(timecost) / 1000)
#print throughput,
#print 'KBps'
sock.sock.close()
print('Ethernet Frame:')
print(TAB_1 + 'Destination: {}, Source: {}, Protocol: {}'.format(
eth.dest_mac, eth.src_mac, eth.proto))
# IPv4
if eth.proto == 8:
ipv4 = IPv4(eth.data)
print(TAB_1 + 'IPv4 Packet:')
print(TAB_2 + 'Version: {}, Header Length: {}, TTL: {},'.format(
ipv4.version, ipv4.header_length, ipv4.ttl))
print(TAB_2 + 'Protocol: {}, Source: {}, Target: {}'.format(
ipv4.proto, ipv4.src, ipv4.target))
# TCP
if ipv4.proto == 6:
tcp = TCP(ipv4.data)
print(TAB_1 + 'TCP Segment:')
print(TAB_2 + 'Source Port: {}, Destination Port: {}'.format(
tcp.src_port, tcp.dest_port))
print(TAB_2 + 'Sequence: {}, Acknowledgment: {}'.format(
tcp.sequence, tcp.acknowledgment))
print(TAB_2 + 'Flags:')
print(TAB_3 + 'URG: {}, ACK: {}, PSH: {}'.format(
tcp.flag_urg, tcp.flag_ack, tcp.flag_psh))
print(TAB_3 + 'RST: {}, SYN: {}, FIN:{}'.format(
tcp.flag_rst, tcp.flag_syn, tcp.flag_fin))
if len(tcp.data) > 0:
# HTTP
if tcp.src_port == 80 or tcp.dest_port == 80:
print(TAB_2 + 'HTTP Data:')
def run(self):
# parameters
Sim.scheduler.reset()
Sim.set_debug('AppHandler')
#Sim.set_debug('TCP')
Sim.set_debug('Link')
net = Network('networks/one-hop-queue.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
# send a file
with open(self.filename, 'r') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# run the simulation
Sim.scheduler.run()
# print some results
print
print "========== Overall results =========="
time = Sim.scheduler.current_time()
print "Total time: %f seconds" % time
avg = numpy.mean(c2.queueing_delay_list)
print "Average queueing delay: %f" % avg
max = numpy.max(c2.queueing_delay_list)
print "Max queueing delay: %f" % max
file_size = os.path.getsize(self.filename)
print "File size: %i" % file_size
throughput = file_size / time
print "Throughput: %f" % throughput
plotter = Plotter()
#print "Saving the sequence plot"
#plotter.create_sequence_plot(c1.x, c1.y, c1.dropX, c1.dropY, c1.ackX, c1.ackY)
self.c2 = c2
self.c1 = c1
self.t1 = t1
self.t2 = t2
self.net = net
plotter.rateTimePlot(c2.packets_received, Sim.scheduler.current_time(),
'one/rateTime.png')
def run(self):
# parameters
Sim.scheduler.reset()
#Sim.set_debug('AppHandler')
#Sim.set_debug('TCP')
Sim.set_debug('Link')
net = Network('networks/two.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a1 = AppHandler('test1.txt')
a2 = AppHandler('test2.txt')
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a1,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a1,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
c3 = TCP(t1,
n1.get_address('n2'),
2,
n2.get_address('n1'),
2,
a2,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
c4 = TCP(t2,
n2.get_address('n1'),
2,
n1.get_address('n2'),
2,
a2,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
# send a file
with open('test1.txt', 'r') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
with open('test2.txt', 'r') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c3.send)
# run the simulation
Sim.scheduler.run()
# print some results
print
print "========== Overall results =========="
time = Sim.scheduler.current_time()
print "Total time: %f seconds" % time
avg = numpy.mean(c2.queueing_delay_list)
print "Average queueing delay: %f" % avg
max = numpy.max(c2.queueing_delay_list)
print "Max queueing delay: %f" % max
file_size = os.path.getsize(self.filename)
print "File size: %i" % file_size
throughput = file_size / time
print "Throughput: %f" % throughput
# Variables for debugging
self.c3 = c3
self.c4 = c4
self.c2 = c2
self.c1 = c1
self.t1 = t1
self.t2 = t2
self.net = net
linkab = n1.links[0]
self.linkab = linkab
l = linkab
# Plotting
plotter = Plotter()
# Plot sequence charts
plotter.clear()
plotter.create_sequence_plot(c1.x,
c1.y,
c1.dropX,
c1.dropY,
c1.ackX,
c1.ackY,
chart_name='two/sequence1.png')
plotter.clear()
plotter.create_sequence_plot(c3.x,
c3.y,
c3.dropX,
c3.dropY,
c3.ackX,
c3.ackY,
chart_name='two/sequence2.png')
# Plot receiver rate
plotter.clear()
plotter.rateTimePlot(c2.packets_received,
Sim.scheduler.current_time(),
chart_name=None)
plotter.rateTimePlot(c4.packets_received,
Sim.scheduler.current_time(),
chart_name='two/rateTime.png')
# Plot queue size
plotter.clear()
plotter.queueSizePlot(l.queue_log_x,
l.queue_log_y,
l.dropped_packets_x,
l.dropped_packets_y,
chart_name='two/queueSize.png')
# Plot congestion window
plotter.clear()
plotter.windowSizePlot(c1.window_x,
c1.window_y,
chart_name="two/windowSize1.png")
plotter.clear()
plotter.windowSizePlot(c3.window_x,
c3.window_y,
chart_name="two/windowSize2.png")
def fn(x, y):
tcp = TCP([x, y], arms=2, armlengths=armlengths)
tcp.computeTcp()
return tcp.tcp # should be list of length 3
def run(self, size):
# parameters
Sim.scheduler.reset()
logging.getLogger('app').setLevel(logging.INFO)
logging.getLogger('bene.link.queue').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.sequence').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.cwnd').setLevel(logging.DEBUG)
if self.debug:
logging.getLogger('bene.tcp').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.sender').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.receiver').setLevel(logging.DEBUG)
# setup network
net = Network('networks/one-hop-q10.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(n2.get_address('n1'), n1.links[0])
n2.add_forwarding_entry(n1.get_address('n2'), n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
window = size
# setup connection
drop = []
filen = ("data/queue-%i.csv" % size)
fd = open(filen, "w")
fd.write("Time_stamp,qDelay\n")
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=window,
drop=drop,
retran=self.retran)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=window,
fd=fd)
# send a file
time_before = Sim.scheduler.current_time()
count = 0
with open(self.filename, 'rb') as f:
while True:
data = f.read(1000)
count += len(data)
# print("0",count)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
Sim.scheduler.run()
time_after = Sim.scheduler.current_time()
Sim.scheduler.reset()
fd.close()
return (time_after - time_before), count
def run(self):
# parameters
Sim.scheduler.reset()
#Sim.set_debug('AppHandler')
#Sim.set_debug('TCP')
Sim.set_debug('Link')
net = Network('networks/one.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a1 = AppHandler('test.txt')
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a1,
window=self.window,
threshold=self.threshold,
fast_recovery=True,
aimdc=5.0 / 6.0)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a1,
window=self.window,
threshold=self.threshold,
fast_recovery=True,
aimdc=5.0 / 6.0)
# send a file
with open('test.txt', 'r') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# run the simulation
Sim.scheduler.run()
# print some results
print
print "========== Overall results =========="
time = Sim.scheduler.current_time()
print "Total time: %f seconds" % time
avg = numpy.mean(c2.queueing_delay_list)
print "Average queueing delay: %f" % avg
max = numpy.max(c2.queueing_delay_list)
print "Max queueing delay: %f" % max
file_size = os.path.getsize(self.filename)
print "File size: %i" % file_size
throughput = file_size / time
print "Throughput: %f" % throughput
plotter = Plotter()
print "Saving the sequence plot"
plotter.create_sequence_plot(c1.x,
c1.y,
c1.dropX,
c1.dropY,
c1.ackX,
c1.ackY,
chart_name='advanced/aimd/sequence.png')
plotter.clear()
plotter.rateTimePlot(c2.packets_received, Sim.scheduler.current_time(),
'advanced/aimd/rateTime1.png')
linkab = n1.links[0]
self.linkab = linkab
plotter.clear()
plotter.queueSizePlot(linkab.queue_log_x,
linkab.queue_log_y,
linkab.dropped_packets_x,
linkab.dropped_packets_y,
chart_name='advanced/aimd/queueSize.png')
plotter.clear()
plotter.windowSizePlot(c1.window_x,
c1.window_y,
chart_name="advanced/aimd/windowSize1.png")
class Cal_camera():
def __init__(self, camera, pnts_pattern):
self.rep = Representation()
self.h = Homography(pnts_pattern)
self.tcp = TCP()
self.a = Angle()
self.camera = camera
self.hom = np.zeros((3, 3))
self.inv_hom = np.zeros((3, 3))
self.Frame = np.zeros((3, 3))
self.inv_Frame = np.zeros((3, 3))
self.hom_final_camera = np.zeros((3, 3))
def get_pxls_homography(self, image, scale=1):
pts_image = self.h.read_image(image, scale)
return pts_image
def calculate_homography(self, pxls_pattern):
self.hom = self.h.calculate(pxls_pattern)
self.inv_hom = linalg.inv(self.hom)
def get_pxl_origin(self, folder, scale=1):
pxl_pnts = []
for f in sorted(folder):
im_uEye = cv2.imread(f)
pxl_pnts.append(self.tcp.read_image(im_uEye, scale))
return pxl_pnts
def get_pxl_orientation(self, folder, scale=1):
for f in sorted(folder):
name = basename(f)
if name == "move_x.jpg":
im_uEye = cv2.imread(f)
pxl_pnts_x = self.tcp.read_image(im_uEye, scale)
elif name == "move_y.jpg":
im_uEye = cv2.imread(f)
pxl_pnts_y = self.tcp.read_image(im_uEye, scale)
elif name == "move_o.jpg":
im_uEye = cv2.imread(f)
pxl_pnts_origin = self.tcp.read_image(im_uEye, scale)
return pxl_pnts_origin, pxl_pnts_x, pxl_pnts_y
def calculate_TCP_orientarion(self, pxl_pnts, pxl_pnts_origin, pxl_pnts_x, pxl_pnts_y, dx, dy):
pxl_TCP = self.tcp.calculate_origin(pxl_pnts)
print "TCP :", pxl_TCP
factor, angle_y, angle_x = self.tcp.calculate_orientation(pxl_pnts_origin, pxl_pnts_x, pxl_pnts_y, dx, dy)
return pxl_TCP, factor, angle_y, angle_x
def calculate_angle_TCP(self, origin, axis_x, pattern):
pnt_origin = self.rep.transform(self.hom, origin)
pnt_x = self.rep.transform(self.hom, axis_x)
pnt_pattern = self.rep.transform(self.hom, pattern)
l_1 = np.float32([pnt_origin[0], pnt_x[0]])
l_2 = pnt_pattern[0:2]
vd1 = self.a.director_vector(l_1[0], l_1[1])
vd2 = self.a.director_vector(l_2[0], l_2[1])
angle = self.a.calculate_angle(vd1, vd2)
return angle
def calculate_frame(self, pxl_TCP, angle):
pnts_TCP = self.rep.transform(self.hom, pxl_TCP)[0]
a = np.deg2rad(angle)
self.Frame = np.float32([[np.cos(a), -np.sin(a), pnts_TCP[0]],
[np.sin(a), np.cos(a), pnts_TCP[1]],
[0, 0, 1]])
self.Orientation = np.float32([[np.cos(a), -np.sin(a), 0],
[np.sin(a), np.cos(a), 0],
[0, 0, 1]])
self.inv_Orientation = linalg.inv(self.Orientation)
self.inv_Frame = linalg.inv(self.Frame)
def calculate_hom_final(self, img, pnts, corners, pnts_final):
# pxls_camera = self.rep.transform(self.inv_hom, pnts)
im_measures = self.rep.define_camera(img.copy(), self.hom)
#------------------ Data in (c)mm
image_axis = self.rep.draw_axis_camera(im_measures, pnts)
#------------------
pnts_Frame = pnts
pnts_camera = self.rep.transform(self.Frame, pnts_Frame)
image_axis_tcp = self.rep.draw_axis_camera(image_axis, pnts_camera)
#------------------
corners_Frame = corners
corners_camera = self.rep.transform(self.Frame, corners_Frame)
img = self.rep.draw_points(image_axis_tcp, corners_camera)
#------------------
pxls_corner = self.rep.transform(self.inv_hom, corners_camera)
self.hom_final_camera, status = cv2.findHomography(pxls_corner.copy(), pnts_final)
self.write_config_file()
return self.hom_final_camera
def write_config_file(self):
hom_vis = self.hom_final_camera
hom_TCP = np.dot(self.inv_hom, self.Frame)
inv_hom_TCP = np.dot(self.inv_Frame, self.hom)
data = dict(
hom_vis=hom_vis.tolist(),
hom=hom_TCP.tolist(),
inv_hom=inv_hom_TCP.tolist(),
)
filename = '../../config/' + self.camera + '_config.yaml'
with open(filename, 'w') as outfile:
yaml.dump(data, outfile)
print data
def visualize_data(self):
print "Homography: "
print self.hom
print "Frame: "
print self.Frame
print "Final homography: "
print self.hom_final_camera
def draw_pattern_axis(self, pnts, img):
pnts_axis_pattern = pnts
pxls_axis_pattern = self.rep.transform(self.inv_hom, pnts_axis_pattern)
pnt_axis_pattern_final = self.rep.transform(self.hom_final_camera, pxls_axis_pattern)
img_pattern_NIT = self.rep.draw_axis_camera(img, pnt_axis_pattern_final)
return img_pattern_NIT
def draw_TCP_axis(self, pnts, img):
pnts_axis = pnts
pnts_axis_TCP = self.rep.transform(self.Frame, pnts_axis)
pxls_axis_TCP = self.rep.transform(self.inv_hom, pnts_axis_TCP)
pnt_axis_TCP_final = self.rep.transform(self.hom_final_camera, pxls_axis_TCP)
img_final_axis = self.rep.draw_axis_camera(img, pnt_axis_TCP_final)
return img_final_axis
def draw_axis(self, pnts, img):
img_TCP = self.draw_pattern_axis(pnts, img)
img_final = self.draw_TCP_axis(pnts, img_TCP)
return img_final
def test_format_message():
test_body = "This is a test!"
expected_message = "b'\\x00\\x00\\x00\\x0f'This is a test!"
assert TCP.format_message(message=test_body) == expected_message
def main(*args, **kwargs):
start = time.time()
global client, passphrase, host, port
network = []
chain = BlockChain(client, passphrase)
files = Filemng(client, chain)
encrypt = files.Load_Both_Keys()
files.Load_Month()
print("Loading Logs")
sensors = Sensor()
sensors.Config_Sensors()
print("Configued Sensors")
que = queue.Queue()
send_que = queue.Queue()
recv_que = queue.Queue()
comm = TCP(encrypt, passphrase, host, port, que, send_que, recv_que)
Showdown = False
while not Showdown:
print("Collecting Sensors data")
Collect_Sensor(chain, sensors)
print("Saving Log")
files.Save_Log()
error = 0
transmit = False
water_count = 0
print("Checking Water level/Levels")
if (float(chain.chain[-1].sensor.water_level) < MAX_WATER_LEVEL
and float(chain.chain[-1].sensor.water_level) != 0.00
or 0 < water_count <= 10):
if (float(chain.chain[-1].sensor.water_level) < MAX_WATER_LEVEL):
water_count = 0
water_count += 1
attenna_status = True #sensors.boot_antenna()
while (not attenna_status and not Showdown):
attenna_status = sensors.boot_antenna()
error += 1
if (error >= 3):
chain.Set_Network_Error(112)
Shutdown(files)
Showdown = True
if (not comm.State):
Start_Comm(comm)
time.sleep(1)
print("Water level High")
transmit = True
print("Checking Unsent Object")
if (Check_Unsent_Blocks(chain) > UNSENT_SEND and not transmit):
attenna_status = True #sensors.boot_antenna()
while (not attenna_status and not Showdown):
attenna_status = sensors.boot_antenna()
error += 1
if (error >= 3):
chain.Set_Network_Error(112)
Shutdown(files)
Showdown = True
if (not comm.State):
Start_Comm(comm)
time.sleep(1)
print("Unsent blocks High")
transmit = True
if (transmit):
Send_Blocks(chain, send_que)
time.sleep(5)
Remove_blocks(chain, recv_que)
print("Transmitting")
else:
print("Nothing to transmitt")
files.Save_Log()
Showdown = True
if not que.empty():
network.append(que.get())
if (len(network) > 0):
chain.Set_Network_Error(network[0][0])
if (network[0][0] == 111):
Showdown = True
time.sleep(2)
print("Cycling ")
print("Shutting Down")
Soft_Shutdown(files, comm)
class PXI:
"""
PXI Class. TODO: write docstring
Attributes:
"""
help_str = ("At any time, type... \n" +
" - 'h' to see this message again \n" +
" - 'r' to reset the connection to CsPy \n" +
" - 'd' to toggle the server DEBUG level logging \n" +
" - 'x' to print the most recently received xml to a file \n" +
" - 'q' to stop the connection and close this server.")
def __init__(self, address: Tuple[str, int]):
self.root_logger = logging.getLogger() # root_logger
self._root_logging_lvl_default = self.root_logger.level
self.sh = self.root_logger.handlers[0] # stream_handler
self._sh_lvl_default = self.sh.level
self.logger = logging.getLogger(self.__class__.__name__)
self.logger.setLevel(logging.DEBUG)
fh = logging.FileHandler('spam.log')
fh.setLevel(logging.DEBUG)
self.logger.addHandler(fh)
self._stop_connections = False
self._reset_connection = False
self._exit_measurement = False
self.cycle_continuously = False
self.return_data = b""
self.return_data_queue = b""
self.measurement_timeout = 0
self.keylisten_thread = None
self.command_queue = Queue(0) # 0 indicates no maximum queue length enforced.
self.element_tags = [] # for debugging
self.devices = []
# instantiate the device objects
self.hsdio = HSDIO(self)
self.tcp = TCP(self, address)
self.analog_input = AnalogInput(self)
self.analog_output = AnalogOutput(self)
self.ttl = TTLInput(self)
# self.daqmx_do = DAQmxDO(self)
self.hamamatsu = Hamamatsu(self)
self.counters = Counters(self)
@property
def stop_connections(self) -> bool:
return self._stop_connections
@stop_connections.setter
def stop_connections(self, value):
self._stop_connections = value
@property
def reset_connection(self) -> bool:
return self._reset_connection
@reset_connection.setter
def reset_connection(self, value):
self._reset_connection = value
@property
def exit_measurement(self) -> bool:
return self._exit_measurement
@exit_measurement.setter
def exit_measurement(self, value):
self._exit_measurement = value
@property
def active_devices(self):
"""
Number of devices that were successfully initialized
"""
return sum(dev.is_initialized for dev in self.devices)
@property
def root_logging_lvl_default(self):
"""
The default root logging level for this server
"""
return self._root_logging_lvl_default
@property
def sh_lvl_default(self):
"""
The default stream handler level for this server
"""
return self._sh_lvl_default
def queue_command(self, command):
self.command_queue.put(command)
def launch_network_thread(self):
self.tcp.launch_network_thread()
def launch_experiment_thread(self):
"""
Launch a thread for the main experiment loop
Thread target method = self.command_loop
"""
self.experiment_thread = threading.Thread(
target=self.command_loop,
name='Experiment Thread'
)
self.experiment_thread.setDaemon(False)
self.experiment_thread.start()
def command_loop(self):
"""
Update devices with xml from CsPy, and get and return data from devices
Pop a command from self.command_queue on each iteration, parse the xml
in that command, and update the instruments accordingly. When the queue
is empty, try to receive measurements from the data if cycling
continuously.
This function handles the switching between updating devices and
getting data from them, while the bulk of the work is done in the
hierarchy of methods in self.parse_xml and self.measurement.
"""
while not (self.stop_connections or self.exit_measurement):
try:
# dequeue xml
xml_str = self.command_queue.get(block=False, timeout=0)
self.parse_xml(xml_str)
except Empty:
self.exit_measurement = False
self.return_data = b"" # clear the return data
if self.cycle_continuously and self.active_devices > 0:
self.logger.debug("Entering cycle continously...")
# This method returns the data
self.return_data_queue = self.measurement()
sleep(0.001) # keep while loop from hogging resources
self.shutdown()
self.logger.info("Exiting Experiment Thread.")
def launch_keylisten_thread(self):
"""
Launch a KeyListener thread to get key presses in the command line
"""
self.keylisten_thread = KeyListener(self.on_key_press)
self.keylisten_thread.setDaemon(True)
self.logger.info("starting keylistener")
self.keylisten_thread.start()
def parse_xml(self, xml_str: str):
"""
Initialize the device instances and other settings from queued xml
Loop over highest tier of xml tags with the root tag='LabView' in the
message received from CsPy, and call the appropriate device class accordingly. the xml is popped
from a queue, which updates in the network_loop whenever a valid
message from CsPy is received.
Args:
'xml_str': (str) xml received from CsPy in the receive_message method
"""
self.exit_measurement = False
self.element_tags = [] # clear the list of received tags
# get the xml root
root = ET.fromstring(xml_str)
if root.tag != "LabView":
self.logger.warning("Not a valid msg for the pxi")
else:
# loop non-recursively over children in root to setup device
# hardware and other server settings
for child in root:
self.element_tags.append(child)
try:
if child.tag == "measure":
# if no data available, take one measurement. Otherwise,
# use the most recent data.
if self.return_data_queue == b"":
self.measurement()
else:
self.return_data = self.return_data_queue
pass
elif child.tag == "pause":
# TODO: set state of server to 'pause';
# i don't know if this a feature that currently gets used,
# so might be able to omit this.
pass
elif child.tag == "run":
# TODO: set state of server to 'run';
# i don't know if this a feature that currently gets used,
# so might be able to omit this.
pass
elif child.tag == "HSDIO":
# setup the HSDIO
self.hsdio.load_xml(child)
self.logger.info("HSDIO XML loaded")
self.hsdio.init()
self.logger.info("HSDIO hardware initialized")
self.hsdio.update()
self.logger.info("HSDIO hardware updated")
elif child.tag == "TTL":
self.ttl.load_xml(child)
self.logger.info("TTLInput XML loaded")
self.ttl.init()
self.logger.info("TTLInput hardware initialized")
elif child.tag == "DAQmxDO":
# self.daqmx_do.load_xml(child)
# self.daqmx_do.init()
pass
elif child.tag == "timeout":
try:
# get timeout in [ms]
self.measurement_timeout = 1000 * float(child.text)
except ValueError as e:
msg = f"{e} \n {child.text} is not valid" + \
f"text for node {child.tag}"
raise XMLError(self, child, message=msg)
elif child.tag == "cycleContinuously":
cycle = False
if child.text.lower() == "true":
cycle = True
self.cycle_continuously = cycle
elif child.tag == "camera":
# set up the Hamamatsu camera
self.hamamatsu.load_xml(child) # Raises ValueError
self.hamamatsu.init() # Raises IMAQErrors
elif child.tag == "AnalogOutput":
# set up the analog_output
self.analog_output.load_xml(child)
self.logger.info("AnalogOutput XML loaded")
self.analog_output.init()
self.logger.info("AnalogOutput initialized")
self.analog_output.update()
self.logger.info("AnalogOutput hardware updated")
elif child.tag == "AnalogInput":
# set up the analog_input
self.analog_input.load_xml(child)
self.analog_input.init()
elif child.tag == "Counters":
# # TODO: implement counters class
# # set up the counters
self.counters.load_xml(child)
self.counters.init()
pass
# # might implement, or might move RF generator functionality to
# # CsPy based on code used by Hybrid.
elif child.tag == "RF_generators":
pass
else:
self.logger.warning(f"Node {child.tag} received is not a valid" +
f"child tag under root <{root.tag}>")
# I do not catch AssertionErrors. The one at the top of load_xml in every
# device class can only occur if the device is passed the wrong xml node,
# which can never occur in pxi.parse_xml, as we check the tag before
# instantiating a device. those assertions are there in case someone down the
# road does something more careless.
except (XMLError, HardwareError) as e:
self.handle_errors(e)
# send a message back to CsPy
self.tcp.send_message(self.return_data)
# clear the return data
self.return_data = b""
self.return_data_queue = b""
def data_to_xml(self) -> str:
"""
Get xml-formatted data string from device measurements
Return the data as an xml string by calling the device class is_out
methods.
Returns:
'return_data': concatenated string of xml-formatted data
"""
return_data = b""
# the devices which have a method named 'data_out' which returns a str
devices = [
self.hamamatsu,
self.counters,
#self.ttl,
# self.counters, #TODO: implement
self.ttl,
self.analog_input
# self.demo # not implemented, and debatable whether it needs to be
]
for dev in devices:
if dev.is_initialized:
try:
return_data += dev.data_out()
except HardwareError as e:
self.handle_errors(e)
self.return_data = return_data
return return_data
def measurement(self) -> str:
"""
Return a queue of the acquired responses queried from device hardware
Returns:
'return_data': string of concatenated responses received from the
device classes
"""
if not (self.stop_connections or self.exit_measurement):
# self.logger.info(f"measurement time lapse= {time()-self.trelative}")
self.trelative = time()
self.reset_data()
self.system_checks()
self.start_tasks()
_is_done = False
_is_error = False
## timed loop to frequently check if tasks are done
tau = 10 # loop period in [ms]
scl = 1e-6 # scale factor to convert ns to ms
devtime = time()
finished_devs = []
while not (_is_done or _is_error or self.stop_connections
or self.exit_measurement):
try:
_is_done = self.is_done()
except HardwareError as e:
self.handle_errors(e)
# sleep to reduce resource usage
sleep(0.001)
try:
self.get_data()
self.system_checks()
self.stop_tasks()
return_data = self.data_to_xml()
return return_data
except Exception as e: # TODO: make less general
self.logger.warning(f"Error encountered {e}\nNo data returned.")
self.handle_errors(e)
return ""
def reset_data(self):
"""
Resets data on devices which need to be reset.
For now, only applies to TTL
"""
try:
self.ttl.reset_data()
except HardwareError as e:
self.handle_errors(e)
def system_checks(self):
"""
Check devices.
For now, only applies to TTL
"""
try:
self.ttl.check()
except HardwareError as e:
self.handle_errors(e)
# wrap batch_method_call calls in convenience functions
def start_tasks(self, handle_error=True):
"""
Start measurement and output tasks for relevant devices
"""
# devices which have a method 'start'
devices = [
self.hsdio,
# self.daqmx_do,
# self.hamamatsu,
self.analog_input,
self.analog_output,
#self.ttl
self.counters
]
self.batch_method_call(devices, 'start', handle_error)
# self.reset_timeout() # TODO : Implement or discard
def stop_tasks(self, handle_error=True):
"""
Stop measurement and output tasks for relevant devices
"""
# devices which have a method 'stop'
devices = [
self.hsdio,
# self.daqmx_do,
self.analog_input,
self.analog_output,
#self.ttl
self.counters # TODO: implement Counters.stop
]
self.batch_method_call(devices, 'stop', handle_error)
def close_tasks(self, handle_error=True):
"""
Close references to tasks for relevant devices
"""
# devices which have a method 'stop'
devices = [
self.hsdio,
# self.daqmx_do,
self.hamamatsu,
self.analog_input,
self.analog_output,
self.ttl,
self.counters # TODO: implement Counters.stop
]
self.batch_method_call(devices, 'close', handle_error)
def get_data(self, handle_error=True):
"""
Get data from the devices
"""
if not (self.stop_connections or self.exit_measurement):
# devices which have a method 'get_data'
devices = [
self.hamamatsu,
self.analog_input,
self.counters # TODO: implement Counters.get_data
]
self.batch_method_call(devices, 'get_data', handle_error)
def is_done(self) -> bool:
"""
Check if devices running processes are done yet
Loops over the device classes and calls the instance's is_done method
for each device capable of running a process and breaks when a process
is found to not be done.
Returns:
done
'done': will return True iff all the device processes are done.
"""
done = True
if not (self.stop_connections or self.exit_measurement):
# devices which have a method named 'is_done' that returns a bool
devices = [
self.hsdio,
self.analog_output,
self.analog_input,
# self.daqmx_do
#self.counters
]
try:
for dev in devices:
if dev.is_initialized:
if not dev.is_done():
done = False
break
except HardwareError as e:
self.handle_errors(e)
return done
return done
def reset_timeout(self):
"""
Seems to change a global variable 'Timeout Elapses at' to the current time + timeout
Will that work here?
Returns:
"""
# TODO: Implement
pass
def on_key_press(self, key: str):
"""
Determines what happens for key presses in the command prompt.
This method to be passed into the KeyListener instance to be called
when keys are pressed.
Args:
'key': the returned key from msvcrt.getwch(), e.g. 'h'
"""
if key == 'h': # show the help str
self.logger.info(self.help_str)
if key == 'r': # reset the connection
self.logger.info("Connection reset by user.")
self.reset_connection = True
if key == 'x': # print most recently received xml to file
try:
fname = self.tcp.xml_to_file()
self.logger.info("wrote xml to file "+fname)
except Exception as e:
self.logger.error(f"oops. failed to write to file. + \n {e}")
if key == 'd': # toggle debug/info level root logging
if self.root_logger.level != logging.DEBUG:
self.root_logger.setLevel(logging.DEBUG)
else:
self.root_logger.setLevel(self.root_logging_lvl_default)
self.logger.info("set the root level logging to default")
if self.sh.level != logging.DEBUG:
self.sh.setLevel(logging.DEBUG)
else:
self.sh.setLevel(self.sh_lvl_default)
self.logger.info("set the stream handler level logging to default")
self.logger.debug("Logging level is now DEBUG")
elif key == 'q':
self.logger.info("Connection stopped by user. Closing server.")
self.exit_measurement = True
self.stop_connections = True
else:
self.logger.info("Not a valid keypress. Type \'h\' for help.")
def handle_errors(self, error: Exception, traceback_str: str = ""):
"""
Handle errors caught in the PXI instance
Error handling philosophy:
I. The class where the error originated should log a useful
message detailing the source of the error
II. If error should halt instrument activity, error should be raised
to pxi class. Use logger.error(msg,exc_info=True) to log error
with traceback.
III. If error should not halt instrument activity, use
logger.warning(msg,exc_info=t/f) (t/f = with/without traceback)
IV. When error is raised to pxi class, this function should be
called. A message will be logged to the terminal output as well
as sent to CsPy, warning the user that an error has occurred
and that the PXI settings should be updated.
V. The current measurement cycle should be aborted, and restarted
if self.cycle_continuously == True. Device where error occurred
should be excluded from the measurement cycle until it has been
reinitialized. I.e., devices which read/write signals (e.g.
TTLInput, HSDIO, etc) should continue to cycle if they can
VI. The errors raised in the device classes can should be classified
coarsely, as many errors should result in the same handling
behavior in this function (e.g. all error types pertaining to an XML
initialization failure should result in a message urging the user to
check the XML in CsPy and reinitialize the device). Specific
error types handled here are HardwareError and XMLError, defined
in pxierrors.py
Args:
error : The error that was raised. Maybe it's useful to keep it around
traceback_str : string useful for traceback
"""
# NOTE:
# This code is not a janitor, your mother/father, etc. If your device soiled itself, it is your
# responsibility to clean up the problem where it occurred. The code that follows is only
# intended to change the state the of the server and/or log a report of what happened,
# in response to whatever mess was made.
if self.stop_connections:
return
self.logger.warning("PXIError encountered. Closing the problematic tasks.")
if isinstance(error, XMLError):
self.logger.error(traceback_str + "\n" + error.message + "\n" +
"Fix the pertinent XML in CsPy, then try again.")
self.cycle_message(error.device)
self.reset_exp_thread()
elif isinstance(error, HardwareError):
self.logger.error(traceback_str + "\n" + error.message)
self.cycle_message(error.device)
self.stop_tasks(handle_error=False) # stop all current measurement tasks
error.device.close() # close the reference to the problematic device
self.reset_exp_thread() # this stalls the program currently
# If not a type of error we anticipated, raise it.
else:
raise error
def cycle_message(self, dev: XMLLoader):
"""
Log a message about the status of the server cycling.
Args:
dev: the device instance where the problem occurred
"""
if self.cycle_continuously:
self.logger.warning(f"The server will now cycle, but without {dev}")
else:
self.logger.info(f"The server is not taking data. Cycle continuously to resume, but without {dev}")
def reset_exp_thread(self):
"""
Restart experiment thread after current measurement ends
"""
# self.logger.info("Waiting for the experiment thread to end...")
# self.exit_measurement = True
# while self.experiment_thread.is_alive():
# pass
# self.experiment_thread.join()
self.logger.info("Restarting current experiment thread...")
self.exit_measurement = False
# overwrite the existing thread ref. might be a better way to do this.
self.launch_experiment_thread()
self.logger.info("Experiment thread relaunched")
def batch_method_call(
self,
device_list: List[Instrument],
method: str,
handle_error: bool = True
):
"""
Call a method common to several device classes
Given a list of device instances, assumed to have method 'method' as
well as bool parameter 'is_initialized', 'method' will be called for
each instance.
For now, it is assumed that 'method' takes no arguments, and does
does not return anything.
Args:
device_list: list of device instances
method: name of the method to be called. make sure every device
in device list has a method with this name.
handle_error: Should self.handle_errors() be called to deal with
errors during this operation?
"""
# only iterate over initialized devices
for dev in filter(lambda x: x.is_initialized, device_list):
fun = getattr(dev, method, None)
if fun is None or not callable(fun):
self.logger.warning(f"{dev} does not have a method '{method}'")
continue
try:
fun() # call the method
# self.logger.info("starting the {dev.__class__.__name__}")
except HardwareError as he:
self.logger.info(
f"Error {he} encountered while performing {dev}.{method}()"
f"handle_error = {handle_error}")
if handle_error:
self.handle_errors(he)
def shutdown(self):
"""
Nicely shut down this server
"""
if self.tcp.seeking_connection:
self.tcp.abort()
self.logger.info(f"Attempting to stop devices with stop method")
self.stop_tasks()
self.logger.info(f"Attempting to close devices with close method")
self.close_tasks()
self.logger.info(f"Disabling all devices")
for device in self.devices:
device.enable = False
class Trainer:
def __init__(self, agent):
self.agent = agent
self.name = "Trainer"
def start_training_session(self, num_of_episodes):
for episode_num in range(num_of_episodes):
self.headline_print("start game of episode number {}".format(episode_num + 1))
self.game_id = rest_api.create_game(self.name).content.decode("utf-8")
print("Trainer created game with id: {}".format(self.game_id))
self.tcp = TCP(self.game_id, self.name, self.on_recieved)
self.start_game_with_agent(self.game_id)
self.headline_print("end of episode number {}".format(episode_num + 1))
def start_game_with_agent(self, game_id):
env = QuoridorEnv(game_id, "Agent")
cur_state = env.reset()
done = False
steps_num = 0
while not done:
steps_num += 1
action = self.agent.act(cur_state, env)
new_state, reward, done, _ = env.step(action)
self.agent.remember(cur_state, action, reward, new_state, done)
self.agent.replay(env) # internally iterates default (prediction) model
self.agent.target_train() # iterates target model
cur_state = new_state
print("\n\nGAME FINISHED IN {} STEPS!\n\n".format(steps_num))
def on_recieved(self, json_message):
if json_message["type"] == "NewTurnEvent":
if json_message["nextPlayerToPlay"] == self.name:
myLoc = json_message["currentPosition"]
actions = []
for move in json_message["avialiableMoves"]:
if int(move["x"]) > int(myLoc["x"]):
actions.append(3) # Move Right
elif int(move["x"]) < int(myLoc["x"]):
actions.append(2) # Move Left
elif int(move["y"]) > int(myLoc["y"]):
actions.append(1) # Move Down
elif int(move["y"]) < int(myLoc["y"]):
actions.append(0) # Move Up
actions_len = len(actions)
random_i = np.random.randint(0, actions_len)
act_json = utils.convert_action_to_server(actions[random_i])
self.tcp.write(act_json)
elif json_message["type"] == "GameOverEvent":
pass
elif json_message["type"] == "RoomStateResponse":
if len(json_message["players"]) == 2:
rest_api.start_game(self.game_id)
def headline_print(self, text):
print("====================================================")
print(text)
print("====================================================")
class QuoridorEnv(gym.Env):
"""
players: {
index: number,
start_location: number,
name: string,
targets: [number]
}
"""
def __init__(self, game_id, player_name, is_not_tcp):
self.game_id = game_id
self.player_name = player_name
self.is_my_turn = False
self.winner_status = GameWinnerStatus.NoWinner
self.last_turn_illegal = False
self.action_options = []
self.winning_points_dim = np.zeros(shape=(9, 9), dtype=int)
# join_game(self.game_id, self.player_name)
if not is_not_tcp:
self.tcp = TCP(game_id, player_name, self.on_recieved)
self.wait_for_my_turn()
self.action_space = spaces.Discrete(Global.num_of_actions)
self.observation_space = spaces.Tuple((
spaces.MultiBinary([9, 9]),
spaces.MultiBinary([9, 9]),
spaces.MultiBinary([9, 9]),
spaces.MultiBinary([9, 9]),
spaces.MultiBinary([9, 9])
))
self.seed()
# Start the first game
#self.reset()
def step(self, action):
assert self.action_space.contains(action)
action = int(action)
self.update_board(action)
self.wait_for_my_turn()
reward, done = self.calculate_reward()
self.is_my_turn = False
# self.print_board()
return self.board, reward, done, {}
def wait_for_my_turn(self):
while not self.is_my_turn:
pass
def reset(self):
# self.board = self.init_board()
return self.board
def calculate_reward(self):
reward = -1
done = False
if self.last_turn_illegal:
reward = -10
self.last_turn_illegal = False
if self.winner_status != GameWinnerStatus.NoWinner:
done = True
if self.winner_status == GameWinnerStatus.EnvWinner:
reward = 200
elif self.winner_status == GameWinnerStatus.EnvLoser:
reward = -200
return reward, done
def update_board(self, action):
operation = utils.convert_action_to_server(action)
self.send_to_server(operation) # WAITING
def print_board(self):
os.system('cls')
print('------- TEAM 600 --------')
arrays = np.dsplit(self.board, 4)
for y in range(9):
for x in range(9):
print('|', end='')
if arrays[0][y][x] != 0:
print(1, end='')
elif arrays[1][y][x] != 0:
print(2, end='')
else:
print(' ', end='')
if arrays[3][y][x] != 0:
print('|', end='')
elif y != 0 & arrays[3][y - 1][x] != 0:
print('|', end='')
else:
print(' ', end='')
print('')
for x_wall in range(9):
if arrays[2][y][x_wall] != 0:
print(' ==', end='')
elif x_wall != 0 & arrays[2][y][x_wall - 1] != 0:
print(' ==', end='')
else:
print(' __', end='')
print('')
def get_and_convert_board(self):
board = json.loads(get_board(self.game_id).content)
return convert_board(board, self.winning_points_dim)
def send_to_server(self, operation):
self.tcp.write(operation)
def on_recieved(self, json_message):
if json_message["type"] == "IllegalMove":
# self.is_my_turn = True
self.last_turn_illegal = True
elif json_message["type"] == "NewTurnEvent":
if json_message["nextPlayerToPlay"] == self.player_name:
self.board = self.get_and_convert_board()
self.is_my_turn = True
self.update_action_options(json_message)
elif json_message["type"] == "GameOverEvent":
self.is_my_turn = True
if json_message["winnerName"] == self.player_name:
self.winner_status = GameWinnerStatus.EnvWinner
else:
self.winner_status = GameWinnerStatus.EnvLoser
elif json_message["type"] == "StartGameMessage":
self.update_winning_locations(json_message["players"])
def action_shape(self):
return action_shape()
def observation_shape(self):
return observation_shape()
def update_action_options(self, moves_json):
self.action_options = []
myLoc = moves_json["currentPosition"]
for move in moves_json["avialiableMoves"]:
if int(move["x"]) > int(myLoc["x"]):
self.action_options.append(3) # Move Right
elif int(move["x"]) < int(myLoc["x"]):
self.action_options.append(2) # Move Left
elif int(move["y"]) > int(myLoc["y"]):
self.action_options.append(1) # Move Down
elif int(move["y"]) < int(myLoc["y"]):
self.action_options.append(0) # Move Up
for wall in moves_json["availableWalls"]:
wall_action = 4 + wall["position"]["x"] + (8 * wall["position"]["y"])
if wall["wallDirection"] == "Down":
wall_action += 64
self.action_options.append(wall_action)
def get_action_options(self):
return self.action_options
def update_winning_locations(self, players):
for player in players:
if player["name"] == self.player_name:
for loc in player["endLine"]:
x = int(loc["x"])
y = int(loc["y"])
self.winning_points_dim[y, x] = 1
print(self.winning_points_dim)
class Robot(object):
def __init__(self, ipAddress):
self.sq = Queue()
self.rq = Queue()
self.struct = Struct('BBbB') #command, selector, value, checksum
self.sender = TCP(isServer=False,
isSender=True,
host=ipAddress,
port=1234,
q=self.sq)
self.receiver = TCP(isServer=False,
isSender=False,
host=ipAddress,
port=5678,
q=self.rq)
def motor(self, device, value):
self.send(1, device, value)
def send(self, command, device, value):
self.sq.put(self.struct.pack(command, device, value))
def connect(self):
self.sender.start()
self.receiver.start()
def listen(self):
pass
def disconnect(self):
while not self.sq.empty():
sleep(0.01)
self.sender.running = False
self.receiver.running = False
self.sender.disconnect()
self.receiver.disconnect()
self.sender.join()
self.receiver.join()
def run(self):
# parameters
Sim.scheduler.reset()
logging.getLogger('app').setLevel(logging.INFO)
logging.getLogger('bene.link.queue').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.sequence').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.cwnd').setLevel(logging.DEBUG)
if self.debug:
logging.getLogger('bene.tcp').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.sender').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.receiver').setLevel(logging.DEBUG)
# setup network
net = Network('networks/one-hop-q10.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(n2.get_address('n1'), n1.links[0])
n2.add_forwarding_entry(n1.get_address('n2'), n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
window = self.wsize
# setup connection
drop = []
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=window,
drop=drop,
retran=self.retran)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=window)
# send a file
strin = ""
times = []
for i in range(5):
with open(self.filename, 'rb') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# break
Sim.scheduler.run()
times.append(Sim.scheduler.current_time())
Sim.scheduler.reset()
times.append(sum(times) / len(times))
with open("report/w10000_TESTING.txt", 'w') as f2:
f2.writelines(["%s\n" % item for item in times])
def run(self):
# parameters
Sim.scheduler.reset()
logging.getLogger('app').setLevel(logging.INFO)
logging.getLogger('bene.link.queue').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.sequence').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.cwnd').setLevel(logging.DEBUG)
if self.debug:
logging.getLogger('bene.tcp').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.sender').setLevel(logging.DEBUG)
logging.getLogger('bene.tcp.receiver').setLevel(logging.DEBUG)
# setup network
net = Network('../networks/one-hop.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(n2.get_address('n1'), n1.links[0])
n2.add_forwarding_entry(n1.get_address('n2'), n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
window = self.window
increment = 0
# setup connection
drop = []
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=window,
drop=drop,
fast=self.fast,
com_seq_num=self.com_seq_num,
increment=increment)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=window)
# send a file
with open(self.filename, 'rb') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# run the simulation
Sim.scheduler.run()
def checkServerMailTCP(payloadToBeChecked):
patternT1 = re.compile("HELO", flags=2) # --->124 same 1
#$SMTP_SERVERS 25 destination ip and port msg:"SERVER-MAIL Exim gethostbyname heap buffer overflow attempt"
patternT2 = re.compile("\\x0A", flags=2) #-->124 NOT |0A| same 1
# $SMTP_SERVERS 25 destination ip and port msg:"SERVER-MAIL Exim gethostbyname heap buffer overflow attempt"
patternT3 = re.compile("EHLO", flags=2) #--->125 not patternT2 same 1
# $SMTP_SERVERS 25 destination ip and port msg:"SERVER-MAIL Exim gethostbyname heap buffer overflow attempt"
patternT4 = re.compile("Content-Disposition\\x3A",
flags=2) #same 2 --->145
# $SMTP_SERVERS 25 msg "SERVER-MAIL Content-Disposition attachment"
patternT5 = re.compile("attachment", flags=2) #same 2 --->145
# $SMTP_SERVERS 25 msg "SERVER-MAIL Content-Disposition attachment"
patternT6 = re.compile("WorldMail IMAP4 Server", flags=2) #--->148
#$HOME_NET 143 source ip then source port msg:"SERVER-MAIL Qualcomm WorldMail Server Response"
patternT7 = re.compile("BM", flags=2) #-->181
# $SMTP_SERVERS 25 destination msg:"SERVER-MAIL IBM Domino BMP color palette stack buffer overflow attempt"
patternT8 = re.compile("\\x00 \\x00 \\x00 \\x00", flags=2) # -->181
# $SMTP_SERVERS 25 destination msg:"SERVER-MAIL IBM Domino BMP color palette stack buffer overflow attempt"
patternT9 = re.compile("\\x28 \\x00 \\x00 \\x00|", flags=2) # -->181
# $SMTP_SERVERS 25 destination msg:"SERVER-MAIL IBM Domino BMP color palette stack buffer overflow attempt"
patternT10 = re.compile(
"GIF89a", flags=2) # -->184,185 -->$FILE_DATA_PORTS source port
#$SMTP_SERVERS 25 destination msg:"SERVER-MAIL IBM Lotus Domino Server nrouter.exe malformed GIF parsing remote exploit attempt"
patternT11 = re.compile(
"\\x21 \\xF9 \\x04",
flags=2) # -->184,185-->$FILE_DATA_PORTS source port
# $SMTP_SERVERS 25 destination msg:"SERVER-MAIL IBM Lotus Domino Server nrouter.exe malformed GIF parsing remote exploit attempt"
patternT12 = re.compile(
"\\x00 \\x2C",
flags=2) # -->184 ,185--> $FILE_DATA_PORTS source port
# $SMTP_SERVERS 25 destination msg:"SERVER-MAIL IBM Lotus Domino Server nrouter.exe malformed GIF parsing remote exploit attempt"
if re.search(patternT1, payloadToBeChecked) and (not re.search(
patternT2,
payloadToBeChecked)) and TCP.getdestinationPort() == "25":
print("Alert!!!\t", "SQL sa login failed")
if re.search(patternT3,
payloadToBeChecked) and TCP.getdestinationPort() == "25":
print(
"Alert!!!\t",
"SERVER-MAIL Exim gethostbyname heap buffer overflow attempt")
if re.search(patternT4, payloadToBeChecked) and re.search(
patternT5,
payloadToBeChecked) and TCP.getdestinationPort() == "25":
print("Alert!!!\t", "SERVER-MAIL Content-Disposition attachment")
if re.search(patternT6,
payloadToBeChecked) and TCP.getsourcePort() == "143":
print("Alert!!!\t",
"SERVER-MAIL Qualcomm WorldMail Server Response")
if re.search(patternT7, payloadToBeChecked) and re.search(
patternT8, payloadToBeChecked) and re.search(
patternT9,
payloadToBeChecked) and TCP.getdestinationPort() == "25":
print(
"Alert!!!\t",
"SERVER-MAIL IBM Domino BMP color palette stack buffer overflow attempt"
)
if re.search(patternT10, payloadToBeChecked) and re.search(
patternT11, payloadToBeChecked) and re.search(
patternT12,
payloadToBeChecked) and TCP.getdestinationPort() == "25":
print(
"Alert!!!\t",
"SERVER-MAIL IBM Lotus Domino Server nrouter.exe malformed GIF parsing remote exploit attempt"
)
def run(self):
# parameters
Sim.scheduler.reset()
Sim.set_debug('AppHandler')
Sim.set_debug('TCP')
# setup network
if self.use_queue:
net = Network('networks/one-hop-queue.txt')
else:
net = Network('networks/one-hop.txt')
net.loss(self.loss)
# setup routes
n1 = net.get_node('n1')
n2 = net.get_node('n2')
n1.add_forwarding_entry(address=n2.get_address('n1'), link=n1.links[0])
n2.add_forwarding_entry(address=n1.get_address('n2'), link=n2.links[0])
# setup transport
t1 = Transport(n1)
t2 = Transport(n2)
# setup application
a = AppHandler(self.filename)
# setup connection
c1 = TCP(t1,
n1.get_address('n2'),
1,
n2.get_address('n1'),
1,
a,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
c2 = TCP(t2,
n2.get_address('n1'),
1,
n1.get_address('n2'),
1,
a,
window=self.window,
threshold=self.threshold,
fast_recovery=self.fast_recovery)
# send a file
with open(self.filename, 'r') as f:
while True:
data = f.read(1000)
if not data:
break
Sim.scheduler.add(delay=0, event=data, handler=c1.send)
# run the simulation
Sim.scheduler.run()
# print some results
print
print "========== Overall results =========="
time = Sim.scheduler.current_time()
print "Total time: %f seconds" % time
avg = numpy.mean(c2.queueing_delay_list)
print "Average queueing delay: %f" % avg
max = numpy.max(c2.queueing_delay_list)
print "Max queueing delay: %f" % max
file_size = os.path.getsize(self.filename)
print "File size: %i" % file_size
throughput = file_size / time
print "Throughput: %f" % throughput
print "%i,%f,%f,%f,%i,%f\n" % (self.window, time, avg, max, file_size,
throughput)
if self.loss == 0.0:
print "Outputing results to experiment.csv"
output_fh = open('experiment.csv', 'a')
output_fh.write(
"%i,%f,%f,%f,%i,%f\n" %
(self.window, time, avg, max, file_size, throughput))
output_fh.close()
print "Saving the sequence plot"
self.create_sequence_plot(c1.x, c1.y, c1.dropX, c1.dropY, c1.ackX,
c1.ackY)
def test_format_data():
test_name = "Test"
test_data = "one, two, three, four"
expected_message = "b'\\x00\\x00\\x00\\x04'Testb'\\x00\\x00\\x00\\x15'one, two, three, four"
assert TCP.format_data(name=test_name, data=test_data) == expected_message
def __init__(self):
TCP.__init__(self)
self.cwnd = 1000
# This file is part of openWNS (open Wireless Network Simulator) # _____________________________________________________________________________ # # Copyright (C) 2004-2007 # Chair of Communication Networks (ComNets) # Kopernikusstr. 16, D-52074 Aachen, Germany # phone: ++49-241-80-27910, # fax: ++49-241-80-22242 # email: [email protected] # www: http://www.openwns.org # _____________________________________________________________________________ # # openWNS is free software; you can redistribute it and/or modify it under the # terms of the GNU Lesser General Public License version 2 as published by the # Free Software Foundation; # # openWNS is distributed in the hope that it will be useful, but WITHOUT ANY # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR # A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more # details. # # You should have received a copy of the GNU Lesser General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # ############################################################################### import openwns import tcp.TCP openwns.simulator.OpenWNS.modules.tcp = TCP.TCP()
def checkServerOtherTCP(payloadToBeChecked):
patternT1 = re.compile('edit\.action\?', flags=2) #72
#$HOME_NET $HTTP_PORTS destination (msg:"SERVER-OTHER Apache Struts2 skillName remote code execution attempt"
patternT2 = re.compile("skillName=\\x7B \\x28 \\x23", flags=2) #72
patternT3 = re.compile("SOAPAction\\x3A,flags=2") #101
#$HOME_NET [$HTTP_PORTS,5555] destination (msg:"SERVER-OTHER MiniUPnPd ExecuteSoapAction buffer overflow attempt"
patternT4 = re.compile("\x75", flags=2) #109
#$HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT5 = re.compile("nsrmm", flags=2) #109
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT6 = re.compile("mmpool", flags=2) # 110
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT7 = re.compile("mmlocate", flags=2) # 111
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT8 = re.compile("nsrjb", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT9 = re.compile("\\x18 \\x03 \\x03", flags=2) # 645
#$HOME_NET [21,25,443,465,636,992,993,995,2484] -> $EXTERNAL_NET any
# (msg:"SERVER-OTHER OpenSSL TLSv1.2 large heartbeat response - possible ssl heartbleed attempt"
patternT10 = re.compile("\\x18 \\x03 \\x02", flags=2) # 646
# $HOME_NET [21,25,443,465,636,992,993,995,2484] -> $EXTERNAL_NET any
# (msg:"SERVER-OTHER OpenSSL TLSv1.1 large heartbeat response - possible ssl heartbleed attempt"
patternT11 = re.compile("\\x18 \\x03 \\x00", flags=2) # 647
# $HOME_NET [21,25,443,465,636,992,993,995,2484] -> $EXTERNAL_NET any
# (msg:"SERVER-OTHER OpenSSL TLSv1 large heartbeat response - possible ssl heartbleed attempt"
patternT12 = re.compile("\\x18 \\x03 \\x01", flags=2) # 648 --->652
# $HOME_NET [21,25,443,465,636,992,993,995,2484] -> $EXTERNAL_NET any
# (msg:"SERVER-OTHER OpenSSL TLSv3 large heartbeat response - possible ssl heartbleed attempt"
patternT13 = re.compile("\\x18 \\x03 \\x03", flags=2) #
#$EXTERNAL_NETany -> $HOME_NET[21, 25, 443, 465, 636, 992, 993, 995, 2484](msg:"SERVER-OTHER OpenSSL TLSv1.2 heartbeat read overrun attempt"
patternT14 = re.compile("\\x18 \\x03 \\x02", flags=2) #
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT15 = re.compile("\\x18 \\x03 \\x00", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT16 = re.compile("\\x18 \\x03 \\x01", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT17 = re.compile("\\x18 \\x03 \\x01", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT18 = re.compile("\\x18 \\x03 \\x01", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT19 = re.compile("\\x18 \\x03 \\x01", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
patternT20 = re.compile("\\x18 \\x03 \\x01", flags=2) # 112
# $HOME_NET 3000 (msg:"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
if ((re.search(patternT1, payloadToBeChecked))
and (re.search(patternT2, payloadToBeChecked))):
print(
"Alert!!!\t",
"SERVER-OTHER Apache Struts2 skillName remote code execution attempt"
)
if (re.search(patternT3, payloadToBeChecked)):
print(
"Alert!!!\t",
"SERVER-OTHER MiniUPnPd ExecuteSoapAction buffer overflow attempt"
)
if (re.search(patternT4, payloadToBeChecked)
and (TCP.getdestinationPort() == "3000")
and re.search(patternT5, payloadToBeChecked)):
print(
"Alert!!!\t",
"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
)
if (re.search(patternT4, payloadToBeChecked)
and (TCP.getdestinationPort() == "3000")
and re.search(patternT6, payloadToBeChecked)):
print(
"Alert!!!\t",
"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
)
if (re.search(patternT4, payloadToBeChecked)
and (TCP.getdestinationPort() == "3000")
and re.search(patternT7, payloadToBeChecked)):
print(
"Alert!!!\t",
"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
)
if (re.search(patternT4, payloadToBeChecked)
and (TCP.getdestinationPort() == "3000")
and re.search(patternT8, payloadToBeChecked)):
print(
"Alert!!!\t",
"SERVER-OTHER EMC AlphaStor Device Manager command injection attempt"
)
if (re.search(patternT9, payloadToBeChecked)) and (
TCP.getsourcePort() == "21" or TCP.getsourcePort() == "443"
or TCP.getsourcePort() == "25" or TCP.getsourcePort() == "993"
or TCP.getsourcePort() == "992" or TCP.getsourcePort() == "636"
or TCP.getsourcePort() == "465" or TCP.getsourcePort() == "995"
or TCP.getsourcePort() == "2484"):
print(
"Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv1.2 large heartbeat response - possible ssl heartbleed attempt"
)
if (re.search(patternT10, payloadToBeChecked)) and (
TCP.getsourcePort() == "21" or TCP.getsourcePort() == "443"
or TCP.getsourcePort() == "25" or TCP.getsourcePort() == "993"
or TCP.getsourcePort() == "992" or TCP.getsourcePort() == "636"
or TCP.getsourcePort() == "465" or TCP.getsourcePort() == "995"
or TCP.getsourcePort() == "2484"):
print(
"Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv1.1 large heartbeat response - possible ssl heartbleed attempt"
)
if (re.search(patternT11, payloadToBeChecked)) and (
TCP.getsourcePort() == "21" or TCP.getsourcePort() == "443"
or TCP.getsourcePort() == "25" or TCP.getsourcePort() == "993"
or TCP.getsourcePort() == "992" or TCP.getsourcePort() == "636"
or TCP.getsourcePort() == "465" or TCP.getsourcePort() == "995"
or TCP.getsourcePort() == "2484"):
print(
"Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv1 large heartbeat response - possible ssl heartbleed attempt"
)
if (re.search(patternT12, payloadToBeChecked)) and (
TCP.getsourcePort() == "21" or TCP.getsourcePort() == "443"
or TCP.getsourcePort() == "25" or TCP.getsourcePort() == "993"
or TCP.getsourcePort() == "992" or TCP.getsourcePort() == "636"
or TCP.getsourcePort() == "465" or TCP.getsourcePort() == "995"
or TCP.getsourcePort() == "2484"):
print(
"Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv3 large heartbeat response - possible ssl heartbleed attempt"
)
if (re.search(patternT9, payloadToBeChecked)) and (
TCP.getdestinationPort() == "21" or TCP.getdestinationPort()
== "443" or TCP.getdestinationPort() == "25"
or TCP.getdestinationPort() == "993"
or TCP.getdestinationPort() == "992"
or TCP.getdestinationPort() == "636"
or TCP.getdestinationPort() == "465"
or TCP.getdestinationPort() == "995"
or TCP.getdestinationPort() == "2484"):
print(
"Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv1.2 heartbeat read overrun attempt")
if (re.search(patternT10, payloadToBeChecked)) and (
TCP.getdestinationPort() == "21" or TCP.getdestinationPort()
== "443" or TCP.getdestinationPort() == "25"
or TCP.getdestinationPort() == "993"
or TCP.getdestinationPort() == "992"
or TCP.getdestinationPort() == "636"
or TCP.getdestinationPort() == "465"
or TCP.getdestinationPort() == "995"
or TCP.getdestinationPort() == "2484"):
print(
"Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv1.1 heartbeat read overrun attempt")
if (re.search(patternT11, payloadToBeChecked)) and (
TCP.getdestinationPort() == "21" or TCP.getdestinationPort()
== "443" or TCP.getdestinationPort() == "25"
or TCP.getdestinationPort() == "993"
or TCP.getdestinationPort() == "992"
or TCP.getdestinationPort() == "636"
or TCP.getdestinationPort() == "465"
or TCP.getdestinationPort() == "995"
or TCP.getdestinationPort() == "2484"):
print("Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv1 heartbeat read overrun attempt")
if (re.search(patternT12, payloadToBeChecked)) and (
TCP.getdestinationPort() == "21" or TCP.getdestinationPort()
== "443" or TCP.getdestinationPort() == "25"
or TCP.getdestinationPort() == "993"
or TCP.getdestinationPort() == "992"
or TCP.getdestinationPort() == "636"
or TCP.getdestinationPort() == "465"
or TCP.getdestinationPort() == "995"
or TCP.getdestinationPort() == "2484"):
print("Alert!!!\t",
"SERVER-OTHER OpenSSL TLSv3 heartbeat read overrun attempt")
