def cmd_set_seed(parent):
# 设置seed
seed = parent.ui.Seed.toPlainText()
seed = re.sub(r'\s+', '', seed) # 去除空白字符
if len(seed) != 32:
QMessageBox.warning(parent, "Warning", "请输入16位hex的内容(可用空格分割)")
return
try:
b = BitArray(hex=seed).bytes
except CreationError:
QMessageBox.warning(parent, "Warning", "请输入16位hex的内容(可用空格分割)")
return
# save seed
print("[INFO]: 设置seed: ", end="")
print(' '.join(format(x, '02x') for x in b))
save_aes_key(parent)
# update seed
settings['aes_seed'] = b
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['set_seed'], b'\x10', b)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_rf_ch_close(parent):
# 射频通道关闭
print("[INFO]: 射频通道关闭")
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['rf_ch_close'], b'\x00', None)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_switch_antenna(parent):
# 切换天线至本机
print("[INFO]: 切换天线至本机")
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['switch_antenna'], b'\x00', None)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_get_status(parent):
# 下传工参
print("[INFO]: 下传工参")
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['get_status'], b'\x00', None)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_ftp_start(parent):
'''
FTP 开始传输
'''
print("[INFO]: FTP开始传输")
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['ftp_start'], b'\x00', None)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_reset(parent):
'''
发送复位命令
'''
print("[INFO]: 发送复位命令")
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['reset'], b'\x00', None)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_send_hex(parent):
# 这里利用了seed窗口进行hex发送, hex数据不经过数据包 直接进入数据帧
seed = parent.ui.Seed.toPlainText()
seed = re.sub(r'\s+', '', seed) # 去除空白字符
try:
b = BitArray(hex=seed).bytes
except CreationError:
QMessageBox.warning(parent, "Warning", "请0~F的hex内容(可用空格分割)")
return
print("[INFO]: hex: ", end="")
print(' '.join(format(x, '02x') for x in b))
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_set_sat_block_num(parent):
block_num = parent.ui.sat_block_num.text()
try:
block_num = int(block_num)
b = BitArray(uint=block_num, length=16).bytes
except (CreationError, ValueError):
QMessageBox.warning(parent, "Warning", "请输入0~65535之间的内容")
return
print("[INFO]: 设置星上包数: ", end="")
print(' '.join(format(x, '02x') for x in b))
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['set_block_num'], b'\x02', b)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_set_speed(parent):
'''
设置天线接收速率
'''
aos_packet = AOS_Packet()
index = parent.ui.comboBox_speed.currentIndex()
speed = None
if index == 0:
print('[INFO]: 设置天线接收速率--12kbps')
speed = cmd_code['sys_speed']['12kbps']
else:
print('[INFO]: 设置天线接收速率--100kbps')
speed = cmd_code['sys_speed']['100kbps']
b_data = aos_packet.gen_packet(cmd_code['set_speed'], b'\x01', speed)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_set_nid(parent):
# 设置nid
nid = parent.ui.nid.text()
if len(nid) > 2 or len(nid) == 0:
QMessageBox.warning(parent, "Warning", "请输入00~0F之间的内容")
return
try:
b = BitArray(hex=nid).bytes
except CreationError:
QMessageBox.warning(parent, "Warning", "请输入00~0F之间的内容")
return
print("[INFO]: 设置nid: ", end="")
print(' '.join(format(x, '02x') for x in b))
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['set_nid'], b'\x01', b)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_del_file(parent):
# 删除文件
del_file_no = parent.ui.del_file_no.text()
if len(del_file_no) > 2 or len(del_file_no) == 0:
QMessageBox.warning(parent, "Warning", "请输入00~0F之间的内容")
return
try:
b = BitArray(hex=del_file_no).bytes
except CreationError:
QMessageBox.warning(parent, "Warning", "请输入00~0F之间的内容")
return
print('[INFO]: 删除文件: ', end="")
print(' '.join(format(x, '02x') for x in b))
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['del_file'], b'\x01', b)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_get_file_block(parent):
# 下传文件数据块
file_block = parent.ui.file_block.text()
file_block = re.sub(r'\s+', '', file_block) # 去除空白字符
if len(file_block) != 16:
QMessageBox.warning(parent, "Warning", "请输入8位hex的内容(可用空格分割)")
return
try:
b = BitArray(hex=file_block).bytes
except CreationError:
QMessageBox.warning(parent, "Warning", "请输入8位hex的内容(可用空格分割)")
return
print("[INFO]: 下传文件数据块: ", end="")
print(' '.join(format(x, '02x') for x in b))
aos_packet = AOS_Packet()
b_data = aos_packet.gen_packet(cmd_code['get_file_block'], b'\x08', b)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_gongcan_download_time(parent):
# 30s工参下传
aos_packet = AOS_Packet()
index = parent.ui.gongcan_download_time_cb.currentIndex()
if index == 0:
print("[INFO]: 30s下传工参: 开")
b_data = aos_packet.gen_packet(
cmd_code['set_gongcan_download_time'], b'\x01',
cmd_code['gongcan_download_time']['open'])
elif index == 1:
print("[INFO]: 30s下传工参: 关")
b_data = aos_packet.gen_packet(
cmd_code['set_gongcan_download_time'], b'\x01',
cmd_code['gongcan_download_time']['close'])
elif index == 2:
cmd_rf_ch_close(None)
return
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
def cmd_set_mod(parent):
'''
设置工作模式
'''
aos_packet = AOS_Packet()
index = parent.ui.comboBox_mode.currentIndex()
mod = None
if index == 0:
print('[INFO]: 缓存模式')
mod = cmd_code['sys_mod']['buf_mod']
elif index == 1:
print('[INFO]: 实时转发模式')
mod = cmd_code['sys_mod']['proxy_mod']
elif index == 2:
print('[INFO]: 数据注入模式')
mod = cmd_code['sys_mod']['data_mod']
else:
print('[ERROR]: index ERROR')
b_data = aos_packet.gen_packet(cmd_code['set_mod'], b'\x01', mod)
# 发前KISS
k = KISS_Encoder_One_Frame()
b_data = k.encode(b_data)
# 发送
kiss_frame.presend_cmd(b_data)
