def setup_network_electrolyzer(self, instance):
"""
Set up network for electrolyzer tests.
"""
fw = cmp.source('feed water')
cw_in = cmp.source('cooling water')
o2 = cmp.sink('oxygen sink')
h2 = cmp.sink('hydrogen sink')
cw_out = cmp.sink('cooling water sink')
instance.set_attr(pr_c=0.99)
cw_el = con.connection(cw_in,
'out1',
instance,
'in1',
fluid={
'H2O': 1,
'H2': 0,
'O2': 0
},
T=20,
p=1)
el_cw = con.connection(instance, 'out1', cw_out, 'in1', T=45)
self.nw.add_conns(cw_el, el_cw)
fw_el = con.connection(fw, 'out1', instance, 'in2', m=0.1, T=20, p=10)
el_o2 = con.connection(instance, 'out2', o2, 'in1')
el_h2 = con.connection(instance, 'out3', h2, 'in1', T=50)
self.nw.add_conns(fw_el, el_o2, el_h2)
def setup(self):
self.nw = nwk.network(['H2O', 'N2', 'O2', 'Ar', 'CO2', 'H2'])
self.comb = cmp.combustion_chamber('combustion chamber')
c1 = con.connection(cmp.source('air'), 'out1', self.comb, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', self.comb, 'in2')
c3 = con.connection(self.comb, 'out1', cmp.sink('flue gas'), 'in1')
self.nw.add_conns(c1, c2, c3)
def test_condenser(self):
"""
Test component properties of condenser.
"""
tesin = cmp.sink('TES in')
tesout = cmp.source('TES out')
hsin = cmp.sink('Cond in')
hsout = cmp.source('Cond out')
he = cmp.condenser('condenser')
tes_he = con.connection(tesout, 'out1', he, 'in2')
he_tes = con.connection(he, 'out2', tesin, 'in1')
hs_he = con.connection(hsout, 'out1', he, 'in1')
he_hs = con.connection(he, 'out1', hsin, 'in1')
self.nw.add_conns(tes_he, he_tes, hs_he, he_hs)
# design specification
he.set_attr(pr1=0.98, pr2=0.98, ttd_u=5, design=['pr2', 'ttd_u', 'ttd_l'], offdesign=['zeta2', 'kA'])
hs_he.set_attr(T=100, p0=0.5, fluid={'N2': 0, 'O2': 0, 'Ar': 0, 'INCOMP::DowQ': 0, 'H2O': 1, 'NH3': 0, 'CO2': 0, 'CH4': 0})
tes_he.set_attr(T=30, p=5, fluid={'N2': 0, 'O2': 0, 'Ar': 0, 'INCOMP::DowQ': 0, 'H2O': 1, 'NH3': 0, 'CO2': 0, 'CH4': 0})
he_tes.set_attr(T=40)
he.set_attr(Q=-80e3)
self.nw.solve('design')
# check heat flow
Q = hs_he.m.val_SI * (he_hs.h.val_SI - hs_he.h.val_SI)
self.nw.save('tmp')
ttd_u = hlp.T_mix_ph([0, hs_he.p.val_SI, hlp.h_mix_pQ(hs_he.to_flow(), 1), hs_he.fluid.val]) - he_tes.T.val_SI
p = hs_he.p.val_SI
eq_(round(ttd_u, 1), round(he.ttd_u.val, 1), 'Value of terminal temperature difference must be ' + str(he.ttd_u.val) + ', is ' + str(ttd_u) + '.')
# check lower terminal temperature difference
he.set_attr(ttd_l=20, ttd_u=np.nan)
self.nw.solve('design')
eq_(round(he_hs.T.val - tes_he.T.val, 1), round(he.ttd_l.val, 1), 'Value of terminal temperature difference must be ' + str(he.ttd_l.val) + ', is ' + str(he_hs.T.val - tes_he.T.val) + '.')
# check kA value
self.nw.solve('offdesign', design_path='tmp')
eq_(round(p, 1), round(hs_he.p.val_SI, 1), 'Value of condensing pressure be ' + str(p) + ', is ' + str(hs_he.p.val_SI) + '.')
shutil.rmtree('./tmp', ignore_errors=True)
def setup(self):
self.nw = nwk.network(['TESPy::fuel', 'TESPy::fuel_fg', 'Air'])
self.comb = cmp.combustion_chamber_stoich('combustion chamber')
c1 = con.connection(cmp.source('air'), 'out1', self.comb, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', self.comb, 'in2')
c3 = con.connection(self.comb, 'out1', cmp.sink('flue gas'), 'in1')
self.nw.add_conns(c1, c2, c3)
def test_network_connection_error_target():
nw = nwk.network(['water'])
source1 = cmp.source('source1')
source2 = cmp.source('source2')
sink = cmp.sink('sink')
a = con.connection(source1, 'out1', sink, 'in1')
b = con.connection(source2, 'out1', sink, 'in1')
nw.add_conns(a, b)
nw.check_network()
def test_combustion_chamber_missing_fuel(self):
"""
Test no fuel in network.
"""
nw = nwk.network(['H2O', 'N2', 'O2', 'Ar', 'CO2'])
comb = cmp.combustion_chamber('combustion chamber')
c1 = con.connection(cmp.source('air'), 'out1', comb, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', comb, 'in2')
c3 = con.connection(comb, 'out1', cmp.sink('flue gas'), 'in1')
nw.add_conns(c1, c2, c3)
nw.solve('design', init_only=True)
def test_heat_ex(self):
"""
Test component properties of heat exchanger.
"""
tesin = cmp.sink('TES in')
tesout = cmp.source('TES out')
hsin = cmp.sink('HS in')
hsout = cmp.source('HS out')
he = cmp.heat_exchanger('heat exchanger')
tes_he = con.connection(tesout, 'out1', he, 'in2')
he_tes = con.connection(he, 'out2', tesin, 'in1')
hs_he = con.connection(hsout, 'out1', he, 'in1')
he_hs = con.connection(he, 'out1', hsin, 'in1')
self.nw.add_conns(tes_he, he_tes, hs_he, he_hs)
# design specification
he.set_attr(pr1=0.98, pr2=0.98, ttd_u=5, design=['pr1', 'pr2', 'ttd_u'], offdesign=['zeta1', 'zeta2', 'kA'])
hs_he.set_attr(T=120, p=3, fluid={'N2': 0, 'O2': 0, 'Ar': 0, 'INCOMP::DowQ': 0, 'H2O': 1, 'NH3': 0, 'CO2': 0, 'CH4': 0})
he_hs.set_attr(T=70)
tes_he.set_attr(T=40, p=5, fluid={'N2': 0, 'O2': 0, 'Ar': 1, 'INCOMP::DowQ': 0, 'H2O': 0, 'NH3': 0, 'CO2': 0, 'CH4': 0})
b = con.bus('heat transfer', P=-80e3)
b.add_comps({'c': he})
self.nw.add_busses(b)
self.nw.solve('design')
# check heat flow
Q = hs_he.m.val_SI * (he_hs.h.val_SI - hs_he.h.val_SI)
self.nw.save('tmp')
eq_(round(hs_he.T.val - he_tes.T.val, 1), round(he.ttd_u.val, 1), 'Value of terminal temperature difference must be ' + str(he.ttd_u.val) + ', is ' + str(hs_he.T.val - he_tes.T.val) + '.')
# check lower terminal temperature difference
he_hs.set_attr(T=np.nan)
he.set_attr(ttd_l=20)
self.nw.solve('design')
eq_(round(he_hs.T.val - tes_he.T.val, 1), round(he.ttd_l.val, 1), 'Value of terminal temperature difference must be ' + str(he.ttd_l.val) + ', is ' + str(he_hs.T.val - tes_he.T.val) + '.')
# check kA value
self.nw.solve('offdesign', design_path='tmp')
eq_(round(Q, 1), round(he.Q.val, 1), 'Value of heat flow must be ' + str(he.Q.val) + ', is ' + str(Q) + '.')
# trigger errors for negative terminal temperature differences at given kA-value
he.set_attr(ttd_l=np.nan)
# ttd_l
he_hs.set_attr(T=30)
try:
self.nw.solve('offdesign', design_path='tmp')
except ValueError:
pass
# ttd_u
he_hs.set_attr(T=np.nan)
he_tes.set_attr(T=130)
try:
self.nw.solve('offdesign', design_path='tmp')
except ValueError:
pass
shutil.rmtree('./tmp', ignore_errors=True)
def test_network_instanciation_no_fluids():
nw = nwk.network([])
so = cmp.source('source')
si = cmp.sink('sink')
conn = con.connection(so, 'out1', si, 'in1')
nw.add_conns(conn)
nw.solve('design', init_only=True)
def test_network_missing_data_in_individual_design_case_file():
nw = nwk.network(['water'])
source = cmp.source('source')
pipe = cmp.pipe('pipe', Q=0, pr=0.95, design=['pr'], offdesign=['zeta'])
sink = cmp.sink('sink')
a = con.connection(source, 'out1', pipe, 'in1', m=1, p=1e5, T=293.15,
fluid={'water': 1})
b = con.connection(pipe, 'out1', sink, 'in1', design_path='tmp2')
nw.add_conns(a, b)
nw.solve('design')
nw.save('tmp')
nw.save('tmp2')
inputs = open('./tmp/conn.csv')
all_lines = inputs.readlines()
all_lines.pop(len(all_lines) - 1)
inputs.close()
with open('./tmp2/conn.csv', 'w') as out:
for line in all_lines:
out.write(line.strip() + '\n')
try:
nw.solve('offdesign', design_path='tmp')
except hlp.TESPyNetworkError:
pass
shutil.rmtree('./tmp', ignore_errors=True)
shutil.rmtree('./tmp2', ignore_errors=True)
def test_network_overdetermination():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1', m=1, p=1e5, x=1, h=1e6, fluid={'water': 1}, fluid_balance=True)
nw.add_conns(a)
nw.solve('design')
def test_network_underdetermination():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1', m=1)
nw.add_conns(a)
nw.solve('design')
def test_network_network_consistency_outlets():
nw = nwk.network(['water', 'air'])
source = cmp.source('source')
splitter = cmp.splitter('splitter')
a = con.connection(source, 'out1', splitter, 'in1')
nw.add_conns(a)
nw.check_network()
def test_network_mode():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1')
nw.add_conns(a)
nw.solve('ofdesign')
def test_network_component_labels():
nw = nwk.network(['water'])
source = cmp.source('label')
sink = cmp.sink('label')
a = con.connection(source, 'out1', sink, 'in1')
nw.add_conns(a)
nw.check_network()
def setup(self):
self.nw = nwk.network(
['INCOMP::DowQ', 'H2O', 'NH3', 'N2', 'O2', 'Ar', 'CO2', 'CH4'],
T_unit='C',
p_unit='bar',
v_unit='m3 / s')
self.source = cmp.source('source')
self.sink = cmp.sink('sink')
def test_network_linear_dependency():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1', m=1, p=1e5, h=1e6, x=1)
nw.add_conns(a)
nw.solve('design')
eq_(nw.lin_dep, True, 'This test must result in a linear dependency of the jacobian matrix.')
def setup_network_21(self, instance):
"""
Set up network for components with two inlets and one outlet.
"""
c1 = con.connection(self.source, 'out1', instance, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', instance, 'in2')
c3 = con.connection(instance, 'out1', self.sink, 'in1')
self.nw.add_conns(c1, c2, c3)
return c1, c2, c3
def test_network_connection_error_source():
nw = nwk.network(['water'])
source = cmp.source('source')
sink1 = cmp.sink('sink1')
sink2 = cmp.sink('sink2')
a = con.connection(source, 'out1', sink1, 'in1')
b = con.connection(source, 'out1', sink2, 'in1')
nw.add_conns(a, b)
nw.check_network()
def test_network_no_progress():
nw = nwk.network(['water'])
source = cmp.source('source')
pipe = cmp.pipe('pipe', pr=1, Q=-100e3)
sink = cmp.sink('sink')
a = con.connection(source, 'out1', pipe, 'in1', m=1, p=1e5, T=280, fluid={'water': 1})
b = con.connection(pipe, 'out1', sink, 'in1')
nw.add_conns(a, b)
nw.solve('design')
eq_(nw.progress, False, 'This test must result in a calculation making no progress, as the pipe\'s outlet enthalpy is below fluid property range.')
def test_network_max_iter():
nw = nwk.network(['water'])
source = cmp.source('source')
pipe = cmp.pipe('pipe', pr=1, Q=100e3)
sink = cmp.sink('sink')
a = con.connection(source, 'out1', pipe, 'in1', m=1, p=1e5, T=280, fluid={'water': 1})
b = con.connection(pipe, 'out1', sink, 'in1')
nw.add_conns(a, b)
nw.solve('design', max_iter=2)
eq_(nw.max_iter, nw.iter + 1, 'This test must result in the itercount being equal to the max iter statement.')
"""
from tespy import con, cmp, nwk
import numpy as np
from matplotlib import pyplot as plt
import pandas as pd
# %% network
fluid_list = ['H2O']
nw = nwk.network(fluids=fluid_list, p_unit='bar', T_unit='C')
# %% components
# sinks & sources
back = cmp.source('to collector')
feed = cmp.sink('from collector')
# collector
coll = cmp.solar_collector(label='solar thermal collector')
# %% connections
b_c = con.connection(back, 'out1', coll, 'in1')
c_f = con.connection(coll, 'out1', feed, 'in1')
nw.add_conns(b_c, c_f)
# %% component parameters
# set pressure ratio and heat flow, as well as dimensional parameters of
# %% network
nw = nwk.network(fluids=['water', 'NH3'],
T_unit='C',
p_unit='bar',
h_unit='kJ / kg',
m_unit='kg / s',
p_range=[0.1, 100],
T_range=[1, 500],
h_range=[15, 5000])
# %% components
# sources & sinks
c_in = cmp.source('coolant in')
cb = cmp.source('consumer back flow')
cf = cmp.sink('consumer feed flow')
ves = cmp.sink('vessel')
# consumer system
cd = cmp.condenser('condenser')
rp = cmp.pump('recirculation pump')
cons = cmp.heat_exchanger_simple('consumer')
# %% connections
# consumer system
p_brine_in = 9.4
T_brine_out = 69.1
# calculation
T_before_turbine = PropsSI('T', 'P', p_after_pump*0.957627118*0.955752212*1e5, 'Q', 1, 'Isopentane')-273.15+2.3
# basic network
nw = nwk.network(fluids=fluids)
nw.set_attr(p_unit='bar', T_unit='C', h_unit='kJ / kg')
# main components
condenser = cmp.condenser('condenser')
ihe = cmp.heat_exchanger('internal heat exchanger')
pump = cmp.pump('feeding pump')
turbine = cmp.turbine('turbine')
p_and_e = cmp.heat_exchanger('preheater and evaporator')
# cooling air
source_ca = cmp.source('cooling air source')
sink_ca = cmp.sink('cooling air sink')
#brine
source_b = cmp.source('brine source')
sink_b = cmp.sink('brine sink')
# working fluid
source_wf_1 = cmp.source('working fluid source before turbine')
sink_wf_1 = cmp.sink('working fluid sink from before turbine')
source_wf_2 = cmp.source('working fluid source from ihe')
sink_wf_2 = cmp.sink('working fluid sink from ihe')
# connections
# main cycle
p_and_e_wf_in = con.connection(source_wf_2, 'out1', p_and_e, 'in2')
p_and_e_wf_out = con.connection(p_and_e, 'out2', sink_wf_2, 'in1')
turbine_wf_in = con.connection(source_wf_1, 'out1', turbine, 'in1')
turbine_ihe = con.connection(turbine, 'out1', ihe, 'in1')
split = cmp.splitter(label='splitter1') turbine_lp = cmp.turbine(label='turbine_lp') # condenser and preheater condenser = cmp.condenser(label='condenser') preheater = cmp.condenser(label='preheater') valve_pre = cmp.valve(label='valve_pre') valve = cmp.valve(label='valve1') merge = cmp.merge(label='merge1') # feed water pump = cmp.pump(label='pump') steam_generator = cmp.heat_exchanger_simple(label='steam generator') # sources and sinks source = cmp.source(label='source') sink = cmp.sink(label='sink') # for cooling water source_cw = cmp.source(label='source_cw') sink_cw = cmp.sink(label='sink_cw') # %% connections # turbine part fs_in = con.connection(source, 'out1', valve_turb, 'in1') fs = con.connection(valve_turb, 'out1', turbine_hp, 'in1') ext = con.connection(turbine_hp, 'out1', split, 'in1') ext_v = con.connection(split, 'out1', valve_pre, 'in1') v_pre = con.connection(valve_pre, 'out1', preheater, 'in1') ext_turb = con.connection(split, 'out2', turbine_lp, 'in1')
import numpy as np
import pandas as pd
# %% network
nw = nwk.network(fluids=['water', 'NH3', 'air'],
T_unit='C',
p_unit='bar',
h_unit='kJ / kg',
m_unit='kg / s')
# %% components
# sources & sinks
c_in = cmp.source('coolant in')
cb = cmp.source('consumer back flow')
cf = cmp.sink('consumer feed flow')
amb = cmp.source('ambient air')
amb_out1 = cmp.sink('sink ambient 1')
amb_out2 = cmp.sink('sink ambient 2')
c_out = cmp.sink('coolant out')
# ambient air system
sp = cmp.splitter('splitter')
fan = cmp.compressor('fan')
# consumer system
cd = cmp.condenser('condenser')
dhp = cmp.pump('district heating pump')
def test_cogeneration_unit(self):
"""
Test component properties of cogeneration unit.
"""
amb = cmp.source('ambient')
sf = cmp.source('fuel')
fg = cmp.sink('flue gas outlet')
cw_in1 = cmp.source('cooling water inlet1')
cw_in2 = cmp.source('cooling water inlet2')
cw_out1 = cmp.sink('cooling water outlet1')
cw_out2 = cmp.sink('cooling water outlet2')
chp = cmp.cogeneration_unit('cogeneration unit', fuel='CH4')
amb_comb = con.connection(amb, 'out1', chp, 'in3')
sf_comb = con.connection(sf, 'out1', chp, 'in4')
comb_fg = con.connection(chp, 'out3', fg, 'in1')
self.nw.add_conns(sf_comb, amb_comb, comb_fg)
cw1_chp1 = con.connection(cw_in1, 'out1', chp, 'in1')
cw2_chp2 = con.connection(cw_in2, 'out1', chp, 'in2')
self.nw.add_conns(cw1_chp1, cw2_chp2)
chp1_cw = con.connection(chp, 'out1', cw_out1, 'in1')
chp2_cw = con.connection(chp, 'out2', cw_out2, 'in1')
self.nw.add_conns(chp1_cw, chp2_cw)
air = {
'N2': 0.7556,
'O2': 0.2315,
'Ar': 0.0129,
'INCOMP::DowQ': 0,
'H2O': 0,
'NH3': 0,
'CO2': 0,
'CH4': 0
}
fuel = {
'N2': 0,
'O2': 0,
'Ar': 0,
'INCOMP::DowQ': 0,
'H2O': 0,
'NH3': 0,
'CO2': 0.04,
'CH4': 0.96
}
water1 = {
'N2': 0,
'O2': 0,
'Ar': 0,
'INCOMP::DowQ': 0,
'H2O': 1,
'NH3': 0,
'CO2': 0,
'CH4': 0
}
water2 = {
'N2': 0,
'O2': 0,
'Ar': 0,
'INCOMP::DowQ': 0,
'H2O': 1,
'NH3': 0,
'CO2': 0,
'CH4': 0
}
chp.set_attr(fuel='CH4',
pr1=0.99,
pr2=0.99,
lamb=1.2,
design=['pr1', 'pr2'],
offdesign=['zeta1', 'zeta2'])
amb_comb.set_attr(p=5, T=30, fluid=air)
sf_comb.set_attr(T=30, fluid=fuel)
cw1_chp1.set_attr(p=3, T=60, m=50, fluid=water1)
cw2_chp2.set_attr(p=3, T=80, m=50, fluid=water2)
TI = con.bus('thermal input')
Q1 = con.bus('heat output 1')
Q2 = con.bus('heat output 2')
Q = con.bus('heat output')
Qloss = con.bus('thermal heat loss')
TI.add_comps({'c': chp, 'p': 'TI'})
Q1.add_comps({'c': chp, 'p': 'Q1'})
Q2.add_comps({'c': chp, 'p': 'Q2'})
Q.add_comps({'c': chp, 'p': 'Q'})
Qloss.add_comps({'c': chp, 'p': 'Qloss'})
self.nw.add_busses(TI, Q1, Q2, Q, Qloss)
ti = 1e6
TI.set_attr(P=ti)
# design point
self.nw.solve('design')
self.nw.save('tmp')
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
eq_(
round(TI.P.val, 1), round(chp.ti.val,
1), 'Value of thermal input must be ' +
str(TI.P.val) + ', is ' + str(chp.ti.val) + '.')
# ti via component
TI.set_attr(P=np.nan)
chp.set_attr(ti=ti)
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
eq_(
round(ti, 1), round(chp.ti.val,
1), 'Value of thermal input must be ' +
str(ti) + ', is ' + str(chp.ti.val) + '.')
chp.set_attr(ti=np.nan)
# Q1 via bus
Q1.set_attr(P=chp.Q1.val)
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
eq_(
round(ti, 1), round(chp.ti.val,
1), 'Value of thermal input must be ' +
str(ti) + ', is ' + str(chp.ti.val) + '.')
heat1 = chp1_cw.m.val_SI * (chp1_cw.h.val_SI - cw1_chp1.h.val_SI)
eq_(
round(heat1, 1), round(chp.Q1.val,
1), 'Value of thermal input must be ' +
str(heat1) + ', is ' + str(chp.Q1.val) + '.')
Q1.set_attr(P=np.nan)
# Q2 via bus
Q2.set_attr(P=1.2 * chp.Q2.val)
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
# due to characteristic function Q1 is equal to Q2 for this cogeneration unit
heat1 = chp1_cw.m.val_SI * (chp1_cw.h.val_SI - cw1_chp1.h.val_SI)
eq_(
round(heat1, 1), round(chp.Q2.val,
1), 'Value of heat output 2 must be ' +
str(heat1) + ', is ' + str(chp.Q2.val) + '.')
# Q2 via component
Q2.set_attr(P=np.nan)
chp.set_attr(Q2=heat1)
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
heat1 = chp1_cw.m.val_SI * (chp1_cw.h.val_SI - cw1_chp1.h.val_SI)
eq_(
round(heat1, 1), round(chp.Q2.val,
1), 'Value of heat output 2 must be ' +
str(heat1) + ', is ' + str(chp.Q2.val) + '.')
# Q via bus
chp.set_attr(Q2=np.nan)
Q.set_attr(P=1.5 * chp.Q1.val)
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
eq_(
round(Q.P.val,
1), round(2 * chp.Q2.val,
1), 'Value of total heat output (' + str(Q.P.val) +
') must be twice as much as value of heat output 2 (' +
str(chp.Q2.val) + ').')
# Qloss via bus
Q.set_attr(P=np.nan)
Qloss.set_attr(P=1e5)
self.nw.solve('offdesign', init_path='tmp', design_path='tmp')
eq_(
round(Qloss.P.val, 1), round(chp.Qloss.val,
1), 'Value of heat loss must be ' +
str(Qloss.P.val) + ', is ' + str(chp.Qloss.val) + '.')
shutil.rmtree('./tmp', ignore_errors=True)
def __init__(self,
press_in=0,
press_out=0,
temp_in=0,
temp_out=0,
overh=0,
enth_in=0,
enth_out=0,
entr_in=0,
entr_out=0,
work_fl='',
mass_fl=0,
pr=0,
q_cap=0,
heat_cap=0,
amb_press_in=0,
amb_press_out=0,
amb_temp_in=0,
amb_temp_out=0,
pinch_point=0,
amb_enth_in=0,
amb_enth_out=0,
amb_entr_in=0,
amb_entr_out=0,
amb_work_fl='',
amb_mass_fl=0,
amb_pr=0,
cycle_name='',
use_aspen=False,
exer_in=0,
exer_out=0,
amb_exer_in=0,
amb_exer_out=0):
super().__init__(press_in, press_out, temp_in, temp_out, enth_in,
enth_out, entr_in, entr_out, work_fl, mass_fl,
cycle_name)
self.q_cap = q_cap
self.heat_cap = heat_cap
self.pr = pr
self.amb_enth_in = amb_enth_in
self.amb_enth_out = amb_enth_out
self.amb_press_in = amb_press_in
self.amb_press_out = amb_press_out
self.amb_temp_in = amb_temp_in
self.amb_temp_out = amb_temp_out
self.amb_entr_in = amb_entr_in
self.amb_entr_out = amb_entr_out
self.pinch_point = pinch_point
self.overh = overh
self.amb_work_fl = amb_work_fl
self.amb_mass_fl = amb_mass_fl
self.amb_pr = amb_pr
self.is_model_correct = True
self.use_aspen = use_aspen
self.exer_in = exer_in
self.exer_out = exer_out
self.amb_exer_in = amb_exer_in
self.amb_exer_out = amb_exer_out
# Applying the condenser model using TESPy. Firstly the components and connections must be set, afterwards
# the function will set the attributes and TESPy engine will calculate the demanded result.
# Setting components:
self.amb_inlet = cmp.sink('inlet of ambient')
self.amb_outlet = cmp.source('outlet of ambient')
self.cycle_inlet = cmp.sink('inlet of cycle')
self.cycle_outlet = cmp.source('outlet of cycle')
self.evaporator = cmp.heat_exchanger('evaporator')
# Setting connections between components:
self.amb_evap = con.connection(self.amb_outlet, 'out1',
self.evaporator, 'in1')
self.evap_amb = con.connection(self.evaporator, 'out1', self.amb_inlet,
'in1')
self.cycle_evap = con.connection(self.cycle_outlet, 'out1',
self.evaporator, 'in2')
self.evap_cycle = con.connection(self.evaporator, 'out2',
self.cycle_inlet, 'in1')
if self.work_fl == '' or self.amb_work_fl == '':
print(
"Working fluid or the ambient working fluid hasn't been set, so creating the TESPy network model"
"can't be completed.\n")
else:
# Putting the connections into the network (TESPy):
# Because TESPy isn't smart enough and it throws error when the working fluid in the cycle
# is the same as the one in ambient,
# it is necessary to make a division of initialization of network basic attributes:
if self.work_fl == self.amb_work_fl:
self.nw = nwk.network(fluids=[self.work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
else:
self.nw = nwk.network(fluids=[self.work_fl, self.amb_work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
self.nw.set_printoptions(print_level='none')
self.nw.add_conns(self.amb_evap, self.evap_amb, self.cycle_evap,
self.evap_cycle)
def __init__(self,
press_in=0,
press_out=0,
temp_in=0,
temp_out=0,
enth_in=0,
enth_out=0,
entr_in=0,
entr_out=0,
work_fl='',
pr=0,
heat_val=0,
mass_fl=0,
temp_cond=0,
overcool=0,
amb_press_in=0,
amb_press_out=0,
amb_temp_in=0,
amb_temp_out=0,
amb_enth_in=0,
amb_enth_out=0,
amb_work_fl='',
amb_mass_fl=0,
amb_pr=0,
cycle_name=''):
super().__init__(press_in, press_out, temp_in, temp_out, enth_in,
enth_out, entr_in, entr_out, work_fl, mass_fl,
cycle_name)
self.heat_val = heat_val
self.pr = pr
self.temp_cond = temp_cond
self.overcool = overcool
if temp_out == 0 and enth_out == 0:
self.temp_out = self.temp_cond - self.overcool
if self.temp_cond == 0 or self.overcool == 0:
print(
"Condenser.__init__(): The value of temp_out hasn't been declared. Therefore it was initialized"
"as: temp_cond minus overcool. It seems however, that one of these values equals 0."
)
self.amb_enth_in = amb_enth_in
self.amb_enth_out = amb_enth_out
self.amb_press_in = amb_press_in
self.amb_press_out = amb_press_out
self.amb_temp_in = amb_temp_in
self.amb_temp_out = amb_temp_out
self.amb_work_fl = amb_work_fl
self.amb_mass_fl = amb_mass_fl
self.amb_pr = amb_pr
# For checking if the values are appropriate in function set_attr_pow_cyc():
self.approved = False
# Applying the condenser model using TESPy. Firstly the components and connections must be set, afterwards
# the function will set the attributes and TESPy solver will calculate the demanded result.
# Setting components:
self.amb_inlet = cmp.sink("inlet of ambient")
self.amb_outlet = cmp.source("outlet of ambient")
self.cycle_inlet = cmp.sink("inlet of cycle")
self.cycle_outlet = cmp.source("outlet of cycle")
self.condenser = cmp.heat_exchanger("condenser")
# Setting connections between components:
self.amb_cond = con.connection(self.amb_outlet, 'out1', self.condenser,
'in2')
self.cond_amb = con.connection(self.condenser, 'out2', self.amb_inlet,
'in1')
self.cycle_cond = con.connection(self.cycle_outlet, 'out1',
self.condenser, 'in1')
self.cond_cycle = con.connection(self.condenser, 'out1',
self.cycle_inlet, 'in1')
if self.work_fl == '' or self.amb_work_fl == '':
print(
"Working fluid or the ambient working fluid hasn't been set, so creating the TESPy network model"
"can't be completed.\n")
else:
# Putting the connections into the network (TESPy):
# Because TESPy isn't smart enough and it throws error when the working fluid in the cycle
# is the same as the one in ambient,
# it is necessary to make a division of initialization of network basic attributes:
if self.work_fl == self.amb_work_fl:
self.nw = nwk.network(fluids=[self.work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
else:
self.nw = nwk.network(fluids=[self.work_fl, self.amb_work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
self.nw.set_printoptions(print_level='none')
self.nw.add_conns(self.amb_cond, self.cond_amb, self.cycle_cond,
self.cond_cycle)
# %% network
nw = nwk.network(fluids=['water', 'NH3'],
T_unit='C',
p_unit='bar',
h_unit='kJ / kg',
m_unit='kg / s',
p_range=[0.1, 100],
T_range=[1, 500],
h_range=[15, 5000])
# %% components
# sources & sinks
c_in = cmp.source('coolant in')
cb = cmp.source('consumer back flow')
cf = cmp.sink('consumer feed flow')
amb_in = cmp.source('source ambient')
amb_out = cmp.sink('sink ambient')
cp1 = cmp.sink('compressor 1')
# consumer system
cd = cmp.condenser('condenser')
rp = cmp.pump('recirculation pump')
cons = cmp.heat_exchanger_simple('consumer')
# evaporator system
from tespy import nwk, con, cmp, hlp
import numpy as np
from matplotlib import pyplot as plt
nw = nwk.network(['water'], p_unit='bar', T_unit='C', h_unit='kJ / kg')
# %% components
pipe = cmp.pipe('pipe')
pipe2 = cmp.pipe('pipe2')
pipe3 = cmp.pipe('pipe3')
pipe4 = cmp.pipe('pipe4')
pipe5 = cmp.pipe('pipe5')
pipe6 = cmp.pipe('pipe6')
sink = cmp.sink('sink')
source = cmp.source('source')
# %% connections
a = con.connection(source, 'out1', pipe, 'in1')
b = con.connection(pipe, 'out1', pipe2, 'in1')
c = con.connection(pipe2, 'out1', pipe3, 'in1')
d = con.connection(pipe3, 'out1', pipe4, 'in1')
e = con.connection(pipe4, 'out1', pipe5, 'in1')
f = con.connection(pipe5, 'out1', pipe6, 'in1')
g = con.connection(pipe6, 'out1', sink, 'in1')
nw.add_conns(a, b, c, d, e, f, g)
# %% connection parameters
a.set_attr(h=40, fluid={'water': 1}, p=1, m=10)