def test_network_component_labels():
nw = nwk.network(['water'])
source = cmp.source('label')
sink = cmp.sink('label')
a = con.connection(source, 'out1', sink, 'in1')
nw.add_conns(a)
nw.check_network()
def test_network_overdetermination():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1', m=1, p=1e5, x=1, h=1e6, fluid={'water': 1}, fluid_balance=True)
nw.add_conns(a)
nw.solve('design')
def test_network_underdetermination():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1', m=1)
nw.add_conns(a)
nw.solve('design')
def test_network_network_consistency_inlets():
nw = nwk.network(['water'])
merge = cmp.merge('merge')
sink = cmp.sink('label')
a = con.connection(merge, 'out1', sink, 'in1')
nw.add_conns(a)
nw.check_network()
def test_network_network_consistency_outlets():
nw = nwk.network(['water', 'air'])
source = cmp.source('source')
splitter = cmp.splitter('splitter')
a = con.connection(source, 'out1', splitter, 'in1')
nw.add_conns(a)
nw.check_network()
def test_network_instanciation_no_fluids():
nw = nwk.network([])
so = cmp.source('source')
si = cmp.sink('sink')
conn = con.connection(so, 'out1', si, 'in1')
nw.add_conns(conn)
nw.solve('design', init_only=True)
def construct_network(path):
"""
creates TESPy network from the data provided in the .csv-file
:param path: path to stored network data
:type path: str
:returns: nw (*tespy.networks.network*) - TESPy network object
"""
# read network .csv-file
netw = pd.read_csv(path + '/netw.csv',
sep=';',
decimal='.',
converters={'fluids': ast.literal_eval})
f_list = netw['fluids'][0]
kwargs = {}
kwargs['m_unit'] = netw['m_unit'][0]
kwargs['p_unit'] = netw['p_unit'][0]
kwargs['p_range'] = [netw['p_min'][0], netw['p_max'][0]]
kwargs['h_unit'] = netw['h_unit'][0]
kwargs['h_range'] = [netw['h_min'][0], netw['h_max'][0]]
kwargs['T_unit'] = netw['T_unit'][0]
kwargs['T_range'] = [netw['T_min'][0], netw['T_max'][0]]
# create network object with its properties
nw = nwk.network(fluids=f_list, **kwargs)
return nw
def setup(self):
self.nw = nwk.network(['water', 'air'])
self.comp = cmp.cogeneration_unit('cogeneration unit')
self.pipe = cmp.pipe('pipe')
self.conn = con.connection(self.comp, 'out1', self.pipe, 'in1')
self.bus = con.bus('mybus')
self.sub = subsys.subsystem('MySub')
def construct_network(path):
r"""
Creates TESPy network from the data provided in the netw.csv-file.
Parameters
----------
path : str
Base-path to stored network data.
Returns
-------
nw : tespy.networks.network
TESPy network object.
"""
# read network .csv-file
netw = pd.read_csv(path + 'netw.csv', sep=';', decimal='.',
converters={'fluids': ast.literal_eval})
f_list = netw['fluids'][0]
kwargs = {}
kwargs['m_unit'] = netw['m_unit'][0]
kwargs['p_unit'] = netw['p_unit'][0]
kwargs['p_range'] = [netw['p_min'][0], netw['p_max'][0]]
kwargs['h_unit'] = netw['h_unit'][0]
kwargs['h_range'] = [netw['h_min'][0], netw['h_max'][0]]
kwargs['T_unit'] = netw['T_unit'][0]
kwargs['T_range'] = [netw['T_min'][0], netw['T_max'][0]]
# create network object with its properties
nw = nwk.network(fluids=f_list, **kwargs)
return nw
def setup(self):
self.nw = nwk.network(['H2O', 'N2', 'O2', 'Ar', 'CO2', 'H2'])
self.comb = cmp.combustion_chamber('combustion chamber')
c1 = con.connection(cmp.source('air'), 'out1', self.comb, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', self.comb, 'in2')
c3 = con.connection(self.comb, 'out1', cmp.sink('flue gas'), 'in1')
self.nw.add_conns(c1, c2, c3)
def test_network_missing_data_in_individual_design_case_file():
nw = nwk.network(['water'])
source = cmp.source('source')
pipe = cmp.pipe('pipe', Q=0, pr=0.95, design=['pr'], offdesign=['zeta'])
sink = cmp.sink('sink')
a = con.connection(source, 'out1', pipe, 'in1', m=1, p=1e5, T=293.15,
fluid={'water': 1})
b = con.connection(pipe, 'out1', sink, 'in1', design_path='tmp2')
nw.add_conns(a, b)
nw.solve('design')
nw.save('tmp')
nw.save('tmp2')
inputs = open('./tmp/conn.csv')
all_lines = inputs.readlines()
all_lines.pop(len(all_lines) - 1)
inputs.close()
with open('./tmp2/conn.csv', 'w') as out:
for line in all_lines:
out.write(line.strip() + '\n')
try:
nw.solve('offdesign', design_path='tmp')
except hlp.TESPyNetworkError:
pass
shutil.rmtree('./tmp', ignore_errors=True)
shutil.rmtree('./tmp2', ignore_errors=True)
def setup(self):
self.nw = nwk.network(['TESPy::fuel', 'TESPy::fuel_fg', 'Air'])
self.comb = cmp.combustion_chamber_stoich('combustion chamber')
c1 = con.connection(cmp.source('air'), 'out1', self.comb, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', self.comb, 'in2')
c3 = con.connection(self.comb, 'out1', cmp.sink('flue gas'), 'in1')
self.nw.add_conns(c1, c2, c3)
def test_network_mode():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1')
nw.add_conns(a)
nw.solve('ofdesign')
def test_network_linear_dependency():
nw = nwk.network(['water'])
source = cmp.source('source')
sink = cmp.sink('sink')
a = con.connection(source, 'out1', sink, 'in1', m=1, p=1e5, h=1e6, x=1)
nw.add_conns(a)
nw.solve('design')
eq_(nw.lin_dep, True, 'This test must result in a linear dependency of the jacobian matrix.')
def setup(self):
self.nw = nwk.network(
['INCOMP::DowQ', 'H2O', 'NH3', 'N2', 'O2', 'Ar', 'CO2', 'CH4'],
T_unit='C',
p_unit='bar',
v_unit='m3 / s')
self.source = cmp.source('source')
self.sink = cmp.sink('sink')
def test_network_connection_error_target():
nw = nwk.network(['water'])
source1 = cmp.source('source1')
source2 = cmp.source('source2')
sink = cmp.sink('sink')
a = con.connection(source1, 'out1', sink, 'in1')
b = con.connection(source2, 'out1', sink, 'in1')
nw.add_conns(a, b)
nw.check_network()
def test_network_connection_error_source():
nw = nwk.network(['water'])
source = cmp.source('source')
sink1 = cmp.sink('sink1')
sink2 = cmp.sink('sink2')
a = con.connection(source, 'out1', sink1, 'in1')
b = con.connection(source, 'out1', sink2, 'in1')
nw.add_conns(a, b)
nw.check_network()
def test_network_max_iter():
nw = nwk.network(['water'])
source = cmp.source('source')
pipe = cmp.pipe('pipe', pr=1, Q=100e3)
sink = cmp.sink('sink')
a = con.connection(source, 'out1', pipe, 'in1', m=1, p=1e5, T=280, fluid={'water': 1})
b = con.connection(pipe, 'out1', sink, 'in1')
nw.add_conns(a, b)
nw.solve('design', max_iter=2)
eq_(nw.max_iter, nw.iter + 1, 'This test must result in the itercount being equal to the max iter statement.')
def test_network_no_progress():
nw = nwk.network(['water'])
source = cmp.source('source')
pipe = cmp.pipe('pipe', pr=1, Q=-100e3)
sink = cmp.sink('sink')
a = con.connection(source, 'out1', pipe, 'in1', m=1, p=1e5, T=280, fluid={'water': 1})
b = con.connection(pipe, 'out1', sink, 'in1')
nw.add_conns(a, b)
nw.solve('design')
eq_(nw.progress, False, 'This test must result in a calculation making no progress, as the pipe\'s outlet enthalpy is below fluid property range.')
def test_combustion_chamber_missing_fuel(self):
"""
Test no fuel in network.
"""
nw = nwk.network(['H2O', 'N2', 'O2', 'Ar', 'CO2'])
comb = cmp.combustion_chamber('combustion chamber')
c1 = con.connection(cmp.source('air'), 'out1', comb, 'in1')
c2 = con.connection(cmp.source('fuel'), 'out1', comb, 'in2')
c3 = con.connection(comb, 'out1', cmp.sink('flue gas'), 'in1')
nw.add_conns(c1, c2, c3)
nw.solve('design', init_only=True)
from tespy import cmp, con, nwk
# %% network
nw = nwk.network(fluids=['water', 'NH3'],
T_unit='C',
p_unit='bar',
h_unit='kJ / kg',
m_unit='kg / s',
p_range=[0.1, 100],
T_range=[1, 500],
h_range=[15, 5000])
# %% components
# sources & sinks
c_in = cmp.source('coolant in')
cb = cmp.source('consumer back flow')
cf = cmp.sink('consumer feed flow')
amb_in = cmp.source('source ambient')
amb_out = cmp.sink('sink ambient')
cp1 = cmp.sink('compressor 1')
# consumer system
cd = cmp.condenser('condenser')
rp = cmp.pump('recirculation pump')
cons = cmp.heat_exchanger_simple('consumer')
# -*- coding: utf-8 -*- from tespy import con, cmp, nwk import matplotlib.pyplot as plt import pandas as pd import numpy as np # %% network fluids = ['water'] nw = nwk.network(fluids=fluids, p_unit='bar', T_unit='C', h_unit='kJ / kg') # %% components # turbine part valve_turb = cmp.valve(label='valve_turb') turbine_hp = cmp.turbine(label='turbine_hp') split = cmp.splitter(label='splitter1') turbine_lp = cmp.turbine(label='turbine_lp') # condenser and preheater condenser = cmp.condenser(label='condenser') preheater = cmp.condenser(label='preheater') valve_pre = cmp.valve(label='valve_pre') valve = cmp.valve(label='valve1') merge = cmp.merge(label='merge1') # feed water pump = cmp.pump(label='pump') steam_generator = cmp.heat_exchanger_simple(label='steam generator')
def __init__(self,
press_in=0,
press_out=0,
temp_in=0,
temp_out=0,
overh=0,
enth_in=0,
enth_out=0,
entr_in=0,
entr_out=0,
work_fl='',
mass_fl=0,
pr=0,
q_cap=0,
heat_cap=0,
amb_press_in=0,
amb_press_out=0,
amb_temp_in=0,
amb_temp_out=0,
pinch_point=0,
amb_enth_in=0,
amb_enth_out=0,
amb_entr_in=0,
amb_entr_out=0,
amb_work_fl='',
amb_mass_fl=0,
amb_pr=0,
cycle_name='',
use_aspen=False,
exer_in=0,
exer_out=0,
amb_exer_in=0,
amb_exer_out=0):
super().__init__(press_in, press_out, temp_in, temp_out, enth_in,
enth_out, entr_in, entr_out, work_fl, mass_fl,
cycle_name)
self.q_cap = q_cap
self.heat_cap = heat_cap
self.pr = pr
self.amb_enth_in = amb_enth_in
self.amb_enth_out = amb_enth_out
self.amb_press_in = amb_press_in
self.amb_press_out = amb_press_out
self.amb_temp_in = amb_temp_in
self.amb_temp_out = amb_temp_out
self.amb_entr_in = amb_entr_in
self.amb_entr_out = amb_entr_out
self.pinch_point = pinch_point
self.overh = overh
self.amb_work_fl = amb_work_fl
self.amb_mass_fl = amb_mass_fl
self.amb_pr = amb_pr
self.is_model_correct = True
self.use_aspen = use_aspen
self.exer_in = exer_in
self.exer_out = exer_out
self.amb_exer_in = amb_exer_in
self.amb_exer_out = amb_exer_out
# Applying the condenser model using TESPy. Firstly the components and connections must be set, afterwards
# the function will set the attributes and TESPy engine will calculate the demanded result.
# Setting components:
self.amb_inlet = cmp.sink('inlet of ambient')
self.amb_outlet = cmp.source('outlet of ambient')
self.cycle_inlet = cmp.sink('inlet of cycle')
self.cycle_outlet = cmp.source('outlet of cycle')
self.evaporator = cmp.heat_exchanger('evaporator')
# Setting connections between components:
self.amb_evap = con.connection(self.amb_outlet, 'out1',
self.evaporator, 'in1')
self.evap_amb = con.connection(self.evaporator, 'out1', self.amb_inlet,
'in1')
self.cycle_evap = con.connection(self.cycle_outlet, 'out1',
self.evaporator, 'in2')
self.evap_cycle = con.connection(self.evaporator, 'out2',
self.cycle_inlet, 'in1')
if self.work_fl == '' or self.amb_work_fl == '':
print(
"Working fluid or the ambient working fluid hasn't been set, so creating the TESPy network model"
"can't be completed.\n")
else:
# Putting the connections into the network (TESPy):
# Because TESPy isn't smart enough and it throws error when the working fluid in the cycle
# is the same as the one in ambient,
# it is necessary to make a division of initialization of network basic attributes:
if self.work_fl == self.amb_work_fl:
self.nw = nwk.network(fluids=[self.work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
else:
self.nw = nwk.network(fluids=[self.work_fl, self.amb_work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
self.nw.set_printoptions(print_level='none')
self.nw.add_conns(self.amb_evap, self.evap_amb, self.cycle_evap,
self.evap_cycle)
def test_network_no_connections_error():
nw = nwk.network(['water'])
nw.solve('design')
# -*- coding: utf-8 -*-
"""
Created on Fri Aug 4 10:37:36 2017
@author: witte
"""
from tespy import con, cmp, nwk
import numpy as np
from matplotlib import pyplot as plt
import pandas as pd
# %% network
fluid_list = ['H2O']
nw = nwk.network(fluids=fluid_list, p_unit='bar', T_unit='C')
# %% components
# sinks & sources
back = cmp.source('to collector')
feed = cmp.sink('from collector')
# collector
coll = cmp.solar_collector(label='solar thermal collector')
# %% connections
b_c = con.connection(back, 'out1', coll, 'in1')
c_f = con.connection(coll, 'out1', feed, 'in1')
p_after_pump = 11.8
mass_flow_rate_air = 6142
T_air = -4.7
p_air = 0.61
mass_flow_rate_brine = 3.4199e2
T_brine_in = 146.6
p_brine_in = 9.4
T_brine_out = 69.1
# calculation
T_before_turbine = PropsSI('T', 'P', p_after_pump*0.957627118*0.955752212*1e5, 'Q', 1, 'Isopentane')-273.15+2.3
# basic network
nw = nwk.network(fluids=fluids)
nw.set_attr(p_unit='bar', T_unit='C', h_unit='kJ / kg')
# main components
condenser = cmp.condenser('condenser')
ihe = cmp.heat_exchanger('internal heat exchanger')
pump = cmp.pump('feeding pump')
turbine = cmp.turbine('turbine')
p_and_e = cmp.heat_exchanger('preheater and evaporator')
# cooling air
source_ca = cmp.source('cooling air source')
sink_ca = cmp.sink('cooling air sink')
#brine
source_b = cmp.source('brine source')
sink_b = cmp.sink('brine sink')
# working fluid
source_wf_1 = cmp.source('working fluid source before turbine')
from tespy import nwk, con, cmp, hlp
import numpy as np
from matplotlib import pyplot as plt
nw = nwk.network(['water'], p_unit='bar', T_unit='C', h_unit='kJ / kg')
# %% components
pipe = cmp.pipe('pipe')
pipe2 = cmp.pipe('pipe2')
pipe3 = cmp.pipe('pipe3')
pipe4 = cmp.pipe('pipe4')
pipe5 = cmp.pipe('pipe5')
pipe6 = cmp.pipe('pipe6')
sink = cmp.sink('sink')
source = cmp.source('source')
# %% connections
a = con.connection(source, 'out1', pipe, 'in1')
b = con.connection(pipe, 'out1', pipe2, 'in1')
c = con.connection(pipe2, 'out1', pipe3, 'in1')
d = con.connection(pipe3, 'out1', pipe4, 'in1')
e = con.connection(pipe4, 'out1', pipe5, 'in1')
f = con.connection(pipe5, 'out1', pipe6, 'in1')
g = con.connection(pipe6, 'out1', sink, 'in1')
nw.add_conns(a, b, c, d, e, f, g)
# %% connection parameters
a.set_attr(h=40, fluid={'water': 1}, p=1, m=10)
def __init__(self,
press_in=0,
press_out=0,
temp_in=0,
temp_out=0,
enth_in=0,
enth_out=0,
entr_in=0,
entr_out=0,
work_fl='',
pr=0,
heat_val=0,
mass_fl=0,
temp_cond=0,
overcool=0,
amb_press_in=0,
amb_press_out=0,
amb_temp_in=0,
amb_temp_out=0,
amb_enth_in=0,
amb_enth_out=0,
amb_work_fl='',
amb_mass_fl=0,
amb_pr=0,
cycle_name=''):
super().__init__(press_in, press_out, temp_in, temp_out, enth_in,
enth_out, entr_in, entr_out, work_fl, mass_fl,
cycle_name)
self.heat_val = heat_val
self.pr = pr
self.temp_cond = temp_cond
self.overcool = overcool
if temp_out == 0 and enth_out == 0:
self.temp_out = self.temp_cond - self.overcool
if self.temp_cond == 0 or self.overcool == 0:
print(
"Condenser.__init__(): The value of temp_out hasn't been declared. Therefore it was initialized"
"as: temp_cond minus overcool. It seems however, that one of these values equals 0."
)
self.amb_enth_in = amb_enth_in
self.amb_enth_out = amb_enth_out
self.amb_press_in = amb_press_in
self.amb_press_out = amb_press_out
self.amb_temp_in = amb_temp_in
self.amb_temp_out = amb_temp_out
self.amb_work_fl = amb_work_fl
self.amb_mass_fl = amb_mass_fl
self.amb_pr = amb_pr
# For checking if the values are appropriate in function set_attr_pow_cyc():
self.approved = False
# Applying the condenser model using TESPy. Firstly the components and connections must be set, afterwards
# the function will set the attributes and TESPy solver will calculate the demanded result.
# Setting components:
self.amb_inlet = cmp.sink("inlet of ambient")
self.amb_outlet = cmp.source("outlet of ambient")
self.cycle_inlet = cmp.sink("inlet of cycle")
self.cycle_outlet = cmp.source("outlet of cycle")
self.condenser = cmp.heat_exchanger("condenser")
# Setting connections between components:
self.amb_cond = con.connection(self.amb_outlet, 'out1', self.condenser,
'in2')
self.cond_amb = con.connection(self.condenser, 'out2', self.amb_inlet,
'in1')
self.cycle_cond = con.connection(self.cycle_outlet, 'out1',
self.condenser, 'in1')
self.cond_cycle = con.connection(self.condenser, 'out1',
self.cycle_inlet, 'in1')
if self.work_fl == '' or self.amb_work_fl == '':
print(
"Working fluid or the ambient working fluid hasn't been set, so creating the TESPy network model"
"can't be completed.\n")
else:
# Putting the connections into the network (TESPy):
# Because TESPy isn't smart enough and it throws error when the working fluid in the cycle
# is the same as the one in ambient,
# it is necessary to make a division of initialization of network basic attributes:
if self.work_fl == self.amb_work_fl:
self.nw = nwk.network(fluids=[self.work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
else:
self.nw = nwk.network(fluids=[self.work_fl, self.amb_work_fl],
T_unit='K',
p_unit='Pa',
h_unit='J / kg')
self.nw.set_printoptions(print_level='none')
self.nw.add_conns(self.amb_cond, self.cond_amb, self.cycle_cond,
self.cond_cycle)
"""
Created on Mon Jul 16 08:44:36 2018
@author: witte
"""
from tespy import cmp, con, nwk, hlp
import numpy as np
import pandas as pd
# %% network
nw = nwk.network(fluids=['water', 'NH3', 'air'],
T_unit='C',
p_unit='bar',
h_unit='kJ / kg',
m_unit='kg / s')
# %% components
# sources & sinks
c_in = cmp.source('coolant in')
cb = cmp.source('consumer back flow')
cf = cmp.sink('consumer feed flow')
amb = cmp.source('ambient air')
amb_out1 = cmp.sink('sink ambient 1')
amb_out2 = cmp.sink('sink ambient 2')
c_out = cmp.sink('coolant out')
# ambient air system
def setup(self):
self.nw = nwk.network(['water', 'air'])
self.comp = cmp.cogeneration_unit('cogeneration unit')
self.bus = con.bus('power')
self.bus.add_comps({'c': self.comp, 'p': 'Param'})