def execute_test_case_setup(self, setup_section, table_format): """ Executes a test case 'SETUP' section The test case 'SETUP' section is mainly used for insert tests. These tests need to have some actions performed before each test case to ensure the target tables are empty. The current supported setup actions: RESET <table name> - Drop and recreate the table DROP PARTITIONS <table name> - Drop all partitions from the table """ setup_section = QueryTestSectionReader.build_query(setup_section) for row in setup_section.split('\n'): row = row.lstrip() if row.startswith('RESET'): db_name, table_name = QueryTestSectionReader.get_table_name_components(\ table_format, row.split('RESET')[1]) self.__reset_table(db_name, table_name) self.client.execute("invalidate metadata " + db_name + "." + table_name) elif row.startswith('DROP PARTITIONS'): db_name, table_name = QueryTestSectionReader.get_table_name_components(\ table_format, row.split('DROP PARTITIONS')[1]) self.__drop_partitions(db_name, table_name) self.client.execute("invalidate metadata " + db_name + "." + table_name) else: assert False, 'Unsupported setup command: %s' % row
def __build_query(self): """Populates db, query_str, table_format_str""" self.db = QueryTestSectionReader.get_db_name(self.test_vector, self.scale_factor) self.query_str = QueryTestSectionReader.build_query(self.query_str.strip()) self.table_format_str = '%s/%s/%s' % (self.test_vector.file_format, self.test_vector.compression_codec, self.test_vector.compression_type)
def execute_test_case_setup(self, setup_section, table_format): """ Executes a test case 'SETUP' section The test case 'SETUP' section is mainly used for insert tests. These tests need to have some actions performed before each test case to ensure the target tables are empty. The current supported setup actions: RESET <table name> - Drop and recreate the table DROP PARTITIONS <table name> - Drop all partitions from the table """ setup_section = QueryTestSectionReader.build_query(setup_section) for row in setup_section.split('\n'): row = row.lstrip() if row.startswith('RESET'): db_name, table_name = QueryTestSectionReader.get_table_name_components(\ table_format, row.split('RESET')[1]) self.__reset_table(db_name, table_name) self.client.execute("invalidate metadata " + db_name + "." + table_name) elif row.startswith('DROP PARTITIONS'): db_name, table_name = QueryTestSectionReader.get_table_name_components(\ table_format, row.split('DROP PARTITIONS')[1]) self.__drop_partitions(db_name, table_name) self.client.execute("invalidate metadata " + db_name + "." + table_name) else: assert False, 'Unsupported setup command: %s' % row
def __init__(self, test_section, test_file_name, test_db_name): if 'CREATE_VIEW' not in test_section: assert 0, 'Error in test file %s. Test cases require a '\ 'CREATE_VIEW section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) self.create_exp_res = None # get map of expected results from test sections if 'CREATE_VIEW_RESULTS' in test_section: self.create_exp_res =\ self._get_expected_results(test_section['CREATE_VIEW_RESULTS']) else: assert 0, 'Error in test file %s. Test cases require a '\ 'CREATE_VIEW_RESULTS section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) self.query_hive_exp_res = None if 'QUERY_HIVE_VIEW_RESULTS' in test_section: self.query_hive_exp_res =\ self._get_expected_results(test_section['QUERY_HIVE_VIEW_RESULTS']) self.query_impala_exp_res = None if 'QUERY_IMPALA_VIEW_RESULTS' in test_section: self.query_impala_exp_res =\ self._get_expected_results(test_section['QUERY_IMPALA_VIEW_RESULTS']) if self.query_hive_exp_res is None and self.query_impala_exp_res is None: assert 0, 'Error in test file %s. Test cases require a QUERY_HIVE_VIEW_RESULTS '\ 'or QUERY_IMPALA_VIEW_RESULTS section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) # clean test section, remove comments etc. self.create_view_sql = QueryTestSectionReader.build_query(test_section['CREATE_VIEW']) view_name = self._get_view_name(self.create_view_sql) if view_name.find(".") != -1: assert 0, 'Error in test file %s. Found unexpected view name %s that is '\ 'qualified with a database' % (test_file_name, view_name) # add db prefix and suffixes to indicate which engine created the view self.hive_view_name = test_db_name + '.' + view_name + '_hive' self.impala_view_name = test_db_name + '.' + view_name + '_impala' self.hive_create_view_sql =\ self.create_view_sql.replace(view_name, self.hive_view_name, 1) self.impala_create_view_sql =\ self.create_view_sql.replace(view_name, self.impala_view_name, 1) # SQL to explain a simple query on the view created by Hive in Hive and Impala if self.query_hive_exp_res is not None: self.query_hive_view_sql = 'explain select * from %s' % (self.hive_view_name) # SQL to explain a simple query on the view created by Impala in Hive and Impala if self.query_impala_exp_res is not None: self.query_impala_view_sql = 'explain select * from %s' % (self.impala_view_name) self.drop_hive_view_sql = "drop view %s" % (self.hive_view_name) self.drop_impala_view_sql = "drop view %s" % (self.impala_view_name)
def __init__(self, test_section, test_file_name, test_db_name): if 'CREATE_VIEW' not in test_section: assert 0, 'Error in test file %s. Test cases require a '\ 'CREATE_VIEW section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) self.create_exp_res = None # get map of expected results from test sections if 'CREATE_VIEW_RESULTS' in test_section: self.create_exp_res =\ self._get_expected_results(test_section['CREATE_VIEW_RESULTS']) else: assert 0, 'Error in test file %s. Test cases require a '\ 'CREATE_VIEW_RESULTS section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) self.query_hive_exp_res = None if 'QUERY_HIVE_VIEW_RESULTS' in test_section: self.query_hive_exp_res =\ self._get_expected_results(test_section['QUERY_HIVE_VIEW_RESULTS']) self.query_impala_exp_res = None if 'QUERY_IMPALA_VIEW_RESULTS' in test_section: self.query_impala_exp_res =\ self._get_expected_results(test_section['QUERY_IMPALA_VIEW_RESULTS']) if self.query_hive_exp_res is None and self.query_impala_exp_res is None: assert 0, 'Error in test file %s. Test cases require a QUERY_HIVE_VIEW_RESULTS '\ 'or QUERY_IMPALA_VIEW_RESULTS section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) # clean test section, remove comments etc. self.create_view_sql = QueryTestSectionReader.build_query(test_section['CREATE_VIEW']) view_name = self._get_view_name(self.create_view_sql) if view_name.find(".") != -1: assert 0, 'Error in test file %s. Found unexpected view name %s that is '\ 'qualified with a database' % (test_file_name, view_name) # add db prefix and suffixes to indicate which engine created the view self.hive_view_name = test_db_name + '.' + view_name + '_hive' self.impala_view_name = test_db_name + '.' + view_name + '_impala' self.hive_create_view_sql =\ self.create_view_sql.replace(view_name, self.hive_view_name, 1) self.impala_create_view_sql =\ self.create_view_sql.replace(view_name, self.impala_view_name, 1) # SQL to explain a simple query on the view created by Hive in Hive and Impala if self.query_hive_exp_res is not None: self.query_hive_view_sql = 'explain select * from %s' % (self.hive_view_name) # SQL to explain a simple query on the view created by Impala in Hive and Impala if self.query_impala_exp_res is not None: self.query_impala_view_sql = 'explain select * from %s' % (self.impala_view_name) self.drop_hive_view_sql = "drop view %s" % (self.hive_view_name) self.drop_impala_view_sql = "drop view %s" % (self.impala_view_name)
def _build_query(self): """Populates db, query_str, table_format_str""" self.db = QueryTestSectionReader.get_db_name(self.test_vector, self.scale_factor) self.query_str = QueryTestSectionReader.build_query( self.query_str.strip()) self.table_format_str = '%s/%s/%s' % ( self.test_vector.file_format, self.test_vector.compression_codec, self.test_vector.compression_type)
def __process_create_section(self, section, test_file_name, test_db_name, table_type): self.existing_table = False self.create_table_sql = QueryTestSectionReader.build_query(remove_comments(section)) name = self.__get_table_name(self.create_table_sql, table_type) assert name.find(".") == -1, 'Error in test file %s. Found unexpected %s '\ 'name %s that is qualified with a database' % (table_type, test_file_name, name) self.table_name = test_db_name + '.' + name self.create_table_sql = self.create_table_sql.replace(name, self.table_name, 1) self.show_create_table_sql = 'show create %s %s' % (table_type, self.table_name) self.drop_table_sql = "drop %s %s" % (table_type, self.table_name)
def __process_create_section(self, section, test_file_name, test_db_name, table_type): self.existing_table = False self.create_table_sql = QueryTestSectionReader.build_query(remove_comments(section)) name = self.__get_table_name(self.create_table_sql, table_type) assert name.find(".") == -1, 'Error in test file %s. Found unexpected %s '\ 'name %s that is qualified with a database' % (table_type, test_file_name, name) self.table_name = test_db_name + '.' + name self.create_table_sql = self.create_table_sql.replace(name, self.table_name, 1) self.show_create_table_sql = 'show create %s %s' % (table_type, self.table_name) self.drop_table_sql = "drop %s %s" % (table_type, self.table_name)
def run_test_case(self, test_file_name, vector, use_db=None, multiple_impalad=False, encoding=None, test_file_vars=None): """ Runs the queries in the specified test based on the vector values Runs the query using targeting the file format/compression specified in the test vector and the exec options specified in the test vector. If multiple_impalad=True a connection to a random impalad will be chosen to execute each test section. Otherwise, the default impalad client will be used. If 'protocol' (either 'hs2' or 'beeswax') is set in the vector, a client for that protocol is used. Otherwise we use the default: beeswax. Additionally, the encoding for all test data can be specified using the 'encoding' parameter. This is useful when data is ingested in a different encoding (ex. latin). If not set, the default system encoding will be used. If a dict 'test_file_vars' is provided, then all keys will be replaced with their values in queries before they are executed. Callers need to avoid using reserved key names, see 'reserved_keywords' below. """ table_format_info = vector.get_value('table_format') exec_options = vector.get_value('exec_option') protocol = vector.get_value('protocol') # Resolve the current user's primary group name. group_id = pwd.getpwnam(getuser()).pw_gid group_name = grp.getgrgid(group_id).gr_name target_impalad_clients = list() if multiple_impalad: target_impalad_clients =\ [ImpalaTestSuite.create_impala_client(host_port, protocol=protocol) for host_port in self.__get_cluster_host_ports(protocol)] else: if protocol == 'beeswax': target_impalad_clients = [self.client] else: assert protocol == 'hs2' target_impalad_clients = [self.hs2_client] # Change the database to reflect the file_format, compression codec etc, or the # user specified database for all targeted impalad. for impalad_client in target_impalad_clients: ImpalaTestSuite.change_database(impalad_client, table_format_info, use_db, pytest.config.option.scale_factor) impalad_client.set_configuration(exec_options) sections = self.load_query_test_file(self.get_workload(), test_file_name, encoding=encoding) for test_section in sections: if 'SHELL' in test_section: assert len(test_section) == 1, \ "SHELL test sections can't contain other sections" cmd = test_section['SHELL']\ .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX)\ .replace('$FILESYSTEM_NAME', FILESYSTEM_NAME)\ .replace('$IMPALA_HOME', IMPALA_HOME) if use_db: cmd = cmd.replace('$DATABASE', use_db) LOG.info("Shell command: " + cmd) check_call(cmd, shell=True) continue if 'QUERY' not in test_section: assert 0, 'Error in test file %s. Test cases require a -- QUERY section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) if 'SETUP' in test_section: self.execute_test_case_setup(test_section['SETUP'], table_format_info) # TODO: support running query tests against different scale factors query = QueryTestSectionReader.build_query(test_section['QUERY'] .replace('$GROUP_NAME', group_name) .replace('$IMPALA_HOME', IMPALA_HOME) .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX) .replace('$FILESYSTEM_NAME', FILESYSTEM_NAME) .replace('$SECONDARY_FILESYSTEM', os.getenv("SECONDARY_FILESYSTEM") or str()) .replace('$USER', getuser()) .replace('$INTERNAL_LISTEN_HOST', INTERNAL_LISTEN_HOST) .replace('$INTERNAL_LISTEN_IP', INTERNAL_LISTEN_IP)) if use_db: query = query.replace('$DATABASE', use_db) reserved_keywords = ["$DATABASE", "$FILESYSTEM_PREFIX", "$FILESYSTEM_NAME", "$GROUP_NAME", "$IMPALA_HOME", "$NAMENODE", "$QUERY", "$SECONDARY_FILESYSTEM", "$USER"] if test_file_vars: for key, value in test_file_vars.iteritems(): if key in reserved_keywords: raise RuntimeError("Key {0} is reserved".format(key)) query = query.replace(key, value) if 'QUERY_NAME' in test_section: LOG.info('Query Name: \n%s\n' % test_section['QUERY_NAME']) # Support running multiple queries within the same test section, only verifying the # result of the final query. The main use case is to allow for 'USE database' # statements before a query executes, but it is not limited to that. # TODO: consider supporting result verification of all queries in the future result = None target_impalad_client = choice(target_impalad_clients) query_options_changed = [] try: user = None if 'USER' in test_section: # Create a new client so the session will use the new username. user = test_section['USER'].strip() target_impalad_client = self.create_impala_client(protocol=protocol) for query in query.split(';'): set_pattern_match = SET_PATTERN.match(query) if set_pattern_match != None: query_options_changed.append(set_pattern_match.groups()[0]) assert set_pattern_match.groups()[0] not in vector.get_value("exec_option"), \ "%s cannot be set in the '.test' file since it is in the test vector. " \ "Consider deepcopy()-ing the vector and removing this option in the " \ "python test." % set_pattern_match.groups()[0] result = self.__execute_query(target_impalad_client, query, user=user) except Exception as e: if 'CATCH' in test_section: self.__verify_exceptions(test_section['CATCH'], str(e), use_db) continue raise finally: if len(query_options_changed) > 0: self.__restore_query_options(query_options_changed, target_impalad_client) if 'CATCH' in test_section and '__NO_ERROR__' not in test_section['CATCH']: expected_str = " or ".join(test_section['CATCH']).strip() \ .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX) \ .replace('$FILESYSTEM_NAME', FILESYSTEM_NAME) \ .replace('$NAMENODE', NAMENODE) \ .replace('$IMPALA_HOME', IMPALA_HOME) assert False, "Expected exception: %s" % expected_str assert result is not None assert result.success # Decode the results read back if the data is stored with a specific encoding. if encoding: result.data = [row.decode(encoding) for row in result.data] # Replace $NAMENODE in the expected results with the actual namenode URI. if 'RESULTS' in test_section: # Combining 'RESULTS' with 'DML_RESULTS" is currently unsupported because # __verify_results_and_errors calls verify_raw_results which always checks # ERRORS, TYPES, LABELS, etc. which doesn't make sense if there are two # different result sets to consider (IMPALA-4471). assert 'DML_RESULTS' not in test_section self.__verify_results_and_errors(vector, test_section, result, use_db) else: # TODO: Can't validate errors without expected results for now. assert 'ERRORS' not in test_section,\ "'ERRORS' sections must have accompanying 'RESULTS' sections" # If --update_results, then replace references to the namenode URI with $NAMENODE. if pytest.config.option.update_results and 'RESULTS' in test_section: test_section['RESULTS'] = test_section['RESULTS'] \ .replace(NAMENODE, '$NAMENODE') \ .replace('$IMPALA_HOME', IMPALA_HOME) \ .replace(INTERNAL_LISTEN_HOST, '$INTERNAL_LISTEN_HOST') \ .replace(INTERNAL_LISTEN_IP, '$INTERNAL_LISTEN_IP') rt_profile_info = None if 'RUNTIME_PROFILE_%s' % table_format_info.file_format in test_section: # If this table format has a RUNTIME_PROFILE section specifically for it, evaluate # that section and ignore any general RUNTIME_PROFILE sections. rt_profile_info = 'RUNTIME_PROFILE_%s' % table_format_info.file_format elif 'RUNTIME_PROFILE' in test_section: rt_profile_info = 'RUNTIME_PROFILE' if rt_profile_info is not None: rt_profile = verify_runtime_profile(test_section[rt_profile_info], result.runtime_profile, update_section=pytest.config.option.update_results) if pytest.config.option.update_results: test_section[rt_profile_info] = "".join(rt_profile) if 'DML_RESULTS' in test_section: assert 'ERRORS' not in test_section # The limit is specified to ensure the queries aren't unbounded. We shouldn't have # test files that are checking the contents of tables larger than that anyways. dml_results_query = "select * from %s limit 1000" % \ test_section['DML_RESULTS_TABLE'] dml_result = self.__execute_query(target_impalad_client, dml_results_query) verify_raw_results(test_section, dml_result, vector.get_value('table_format').file_format, result_section='DML_RESULTS', update_section=pytest.config.option.update_results) if pytest.config.option.update_results: output_file = os.path.join(EE_TEST_LOGS_DIR, test_file_name.replace('/','_') + ".test") write_test_file(output_file, sections, encoding=encoding)
def run_test_case(self, test_file_name, vector, use_db=None, multiple_impalad=False, encoding=None, test_file_vars=None): """ Runs the queries in the specified test based on the vector values Runs the query using targeting the file format/compression specified in the test vector and the exec options specified in the test vector. If multiple_impalad=True a connection to a random impalad will be chosen to execute each test section. Otherwise, the default impalad client will be used. Additionally, the encoding for all test data can be specified using the 'encoding' parameter. This is useful when data is ingested in a different encoding (ex. latin). If not set, the default system encoding will be used. If a dict 'test_file_vars' is provided, then all keys will be replaced with their values in queries before they are executed. Callers need to avoid using reserved key names, see 'reserved_keywords' below. """ table_format_info = vector.get_value('table_format') exec_options = vector.get_value('exec_option') # Resolve the current user's primary group name. group_id = pwd.getpwnam(getuser()).pw_gid group_name = grp.getgrgid(group_id).gr_name target_impalad_clients = list() if multiple_impalad: target_impalad_clients =\ map(ImpalaTestSuite.create_impala_client, IMPALAD_HOST_PORT_LIST) else: target_impalad_clients = [self.client] # Change the database to reflect the file_format, compression codec etc, or the # user specified database for all targeted impalad. for impalad_client in target_impalad_clients: ImpalaTestSuite.change_database(impalad_client, table_format_info, use_db, pytest.config.option.scale_factor) impalad_client.set_configuration(exec_options) sections = self.load_query_test_file(self.get_workload(), test_file_name, encoding=encoding) for test_section in sections: if 'SHELL' in test_section: assert len(test_section) == 1, \ "SHELL test sections can't contain other sections" cmd = test_section['SHELL']\ .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX)\ .replace('$IMPALA_HOME', IMPALA_HOME) if use_db: cmd = cmd.replace('$DATABASE', use_db) LOG.info("Shell command: " + cmd) check_call(cmd, shell=True) continue if 'QUERY' not in test_section: assert 0, 'Error in test file %s. Test cases require a -- QUERY section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) if 'SETUP' in test_section: self.execute_test_case_setup(test_section['SETUP'], table_format_info) # TODO: support running query tests against different scale factors query = QueryTestSectionReader.build_query( test_section['QUERY'].replace( '$GROUP_NAME', group_name).replace('$IMPALA_HOME', IMPALA_HOME).replace( '$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX).replace( '$SECONDARY_FILESYSTEM', os.getenv("SECONDARY_FILESYSTEM") or str())) if use_db: query = query.replace('$DATABASE', use_db) reserved_keywords = [ "$DATABASE", "$FILESYSTEM_PREFIX", "$GROUP_NAME", "$IMPALA_HOME", "$NAMENODE", "$QUERY", "$SECONDARY_FILESYSTEM" ] if test_file_vars: for key, value in test_file_vars.iteritems(): if key in reserved_keywords: raise RuntimeError("Key {0} is reserved".format(key)) query = query.replace(key, value) if 'QUERY_NAME' in test_section: LOG.info('Query Name: \n%s\n' % test_section['QUERY_NAME']) # Support running multiple queries within the same test section, only verifying the # result of the final query. The main use case is to allow for 'USE database' # statements before a query executes, but it is not limited to that. # TODO: consider supporting result verification of all queries in the future result = None target_impalad_client = choice(target_impalad_clients) query_options_changed = [] try: user = None if 'USER' in test_section: # Create a new client so the session will use the new username. user = test_section['USER'].strip() target_impalad_client = self.create_impala_client() for query in query.split(';'): set_pattern_match = SET_PATTERN.match(query) if set_pattern_match != None: query_options_changed.append( set_pattern_match.groups()[0]) result = self.__execute_query(target_impalad_client, query, user=user) except Exception as e: if 'CATCH' in test_section: self.__verify_exceptions(test_section['CATCH'], str(e), use_db) continue raise finally: if len(query_options_changed) > 0: self.__restore_query_options(query_options_changed, target_impalad_client) if 'CATCH' in test_section and '__NO_ERROR__' not in test_section[ 'CATCH']: expected_str = " or ".join(test_section['CATCH']).strip() \ .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX) \ .replace('$NAMENODE', NAMENODE) \ .replace('$IMPALA_HOME', IMPALA_HOME) assert False, "Expected exception: %s" % expected_str assert result is not None assert result.success # Decode the results read back if the data is stored with a specific encoding. if encoding: result.data = [row.decode(encoding) for row in result.data] # Replace $NAMENODE in the expected results with the actual namenode URI. if 'RESULTS' in test_section: # Combining 'RESULTS' with 'DML_RESULTS" is currently unsupported because # __verify_results_and_errors calls verify_raw_results which always checks # ERRORS, TYPES, LABELS, etc. which doesn't make sense if there are two # different result sets to consider (IMPALA-4471). assert 'DML_RESULTS' not in test_section self.__verify_results_and_errors(vector, test_section, result, use_db) else: # TODO: Can't validate errors without expected results for now. assert 'ERRORS' not in test_section,\ "'ERRORS' sections must have accompanying 'RESULTS' sections" # If --update_results, then replace references to the namenode URI with $NAMENODE. if pytest.config.option.update_results and 'RESULTS' in test_section: test_section['RESULTS'] = test_section['RESULTS'] \ .replace(NAMENODE, '$NAMENODE') \ .replace('$IMPALA_HOME', IMPALA_HOME) if 'RUNTIME_PROFILE' in test_section: verify_runtime_profile(test_section['RUNTIME_PROFILE'], result.runtime_profile) if 'DML_RESULTS' in test_section: assert 'ERRORS' not in test_section # The limit is specified to ensure the queries aren't unbounded. We shouldn't have # test files that are checking the contents of tables larger than that anyways. dml_results_query = "select * from %s limit 1000" % \ test_section['DML_RESULTS_TABLE'] dml_result = self.__execute_query(target_impalad_client, dml_results_query) verify_raw_results( test_section, dml_result, vector.get_value('table_format').file_format, pytest.config.option.update_results, result_section='DML_RESULTS') if pytest.config.option.update_results: output_file = os.path.join( EE_TEST_LOGS_DIR, test_file_name.replace('/', '_') + ".test") write_test_file(output_file, sections, encoding=encoding)
def run_test_case(self, test_file_name, vector, use_db=None, multiple_impalad=False, encoding=None): """ Runs the queries in the specified test based on the vector values Runs the query using targeting the file format/compression specified in the test vector and the exec options specified in the test vector. If multiple_impalad=True a connection to a random impalad will be chosen to execute each test section. Otherwise, the default impalad client will be used. Additionally, the encoding for all test data can be specified using the 'encoding' parameter. This is useful when data is ingested in a different encoding (ex. latin). If not set, the default system encoding will be used. """ table_format_info = vector.get_value('table_format') exec_options = vector.get_value('exec_option') # Resolve the current user's primary group name. group_id = pwd.getpwnam(getuser()).pw_gid group_name = grp.getgrgid(group_id).gr_name target_impalad_clients = list() if multiple_impalad: target_impalad_clients =\ map(ImpalaTestSuite.create_impala_client, IMPALAD_HOST_PORT_LIST) else: target_impalad_clients = [self.client] # Change the database to reflect the file_format, compression codec etc, or the # user specified database for all targeted impalad. for impalad_client in target_impalad_clients: ImpalaTestSuite.change_database(impalad_client, table_format_info, use_db, pytest.config.option.scale_factor) impalad_client.set_configuration(exec_options) sections = self.load_query_test_file(self.get_workload(), test_file_name, encoding=encoding) for test_section in sections: if 'SHELL' in test_section: assert len(test_section) == 1, \ "SHELL test sections can't contain other sections" cmd = test_section['SHELL']\ .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX)\ .replace('$IMPALA_HOME', IMPALA_HOME) if use_db: cmd = cmd.replace('$DATABASE', use_db) LOG.info("Shell command: " + cmd) check_call(cmd, shell=True) continue if 'QUERY' not in test_section: assert 0, 'Error in test file %s. Test cases require a -- QUERY section.\n%s' %\ (test_file_name, pprint.pformat(test_section)) if 'SETUP' in test_section: self.execute_test_case_setup(test_section['SETUP'], table_format_info) # TODO: support running query tests against different scale factors query = QueryTestSectionReader.build_query(test_section['QUERY'] .replace('$GROUP_NAME', group_name) .replace('$IMPALA_HOME', IMPALA_HOME) .replace('$FILESYSTEM_PREFIX', FILESYSTEM_PREFIX) .replace('$SECONDARY_FILESYSTEM', os.getenv("SECONDARY_FILESYSTEM") or str())) if use_db: query = query.replace('$DATABASE', use_db) if 'QUERY_NAME' in test_section: LOG.info('Query Name: \n%s\n' % test_section['QUERY_NAME']) # Support running multiple queries within the same test section, only verifying the # result of the final query. The main use case is to allow for 'USE database' # statements before a query executes, but it is not limited to that. # TODO: consider supporting result verification of all queries in the future result = None target_impalad_client = choice(target_impalad_clients) query_options_changed = [] try: user = None if 'USER' in test_section: # Create a new client so the session will use the new username. user = test_section['USER'].strip() target_impalad_client = self.create_impala_client() for query in query.split(';'): set_pattern_match = SET_PATTERN.match(query) if set_pattern_match != None: query_options_changed.append(set_pattern_match.groups()[0]) result = self.__execute_query(target_impalad_client, query, user=user) except Exception as e: if 'CATCH' in test_section: self.__verify_exceptions(test_section['CATCH'], str(e), use_db) continue raise finally: if len(query_options_changed) > 0: self.__restore_query_options(query_options_changed, target_impalad_client) if 'CATCH' in test_section: assert test_section['CATCH'].strip() == '' assert result is not None assert result.success # Decode the results read back if the data is stored with a specific encoding. if encoding: result.data = [row.decode(encoding) for row in result.data] # Replace $NAMENODE in the expected results with the actual namenode URI. if 'RESULTS' in test_section: self.__verify_results_and_errors(vector, test_section, result, use_db) else: # TODO: Can't validate errors without expected results for now. assert 'ERRORS' not in test_section,\ "'ERRORS' sections must have accompanying 'RESULTS' sections" # If --update_results, then replace references to the namenode URI with $NAMENODE. if pytest.config.option.update_results and 'RESULTS' in test_section: test_section['RESULTS'] = test_section['RESULTS'] \ .replace(NAMENODE, '$NAMENODE') \ .replace('$IMPALA_HOME', IMPALA_HOME) if 'RUNTIME_PROFILE' in test_section: verify_runtime_profile(test_section['RUNTIME_PROFILE'], result.runtime_profile) if pytest.config.option.update_results: output_file = os.path.join('/tmp', test_file_name.replace('/','_') + ".test") write_test_file(output_file, sections, encoding=encoding)