def __init__(self, screen, interval):
self.running = True
self.screen = screen
self.interval = interval
# master parameters, used in rendering and updated by playlist advancer thread
self.masterParams = PulseEffectParameters()
# if we got a curses screen, use it for debug input through the keyboard
if self.screen:
# re-open stdout with a buffer size of 0. this makes print commands work again.
sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
self.screen.clear()
self.screen.refresh()
# put keyboard state into effect parameters
keymonitor = KeyboardMonitorThread(self.masterParams, self.screen)
keymonitor.start()
points_filename = os.path.abspath(os.path.join(os.path.dirname(__file__),
'..', 'models', 'pulse_pod.json'))
model = PulseModel(points_filename=points_filename)
# a playlist. each entry in a playlist can contain one or more effect layers
# (if more than one, they are all rendered into the same frame...mixing method
# is determined by individual effect layers' render implementations)
playlist = Playlist([
[
AverageLayer(
OrbitalLayer(0.0013, 0.0011, 3.0, 5.0, 1, 3.0),
OrbitalLayer(0.0007, 0.0011, 5.0, 5.0, -1, 5.0),
)
],
])
# the renderer manages a playlist (or dict of multiple playlists), as well as transitions
# and gamma correction
renderer = Renderer(playlists={'all': playlist}, gamma=2.2)
# the controller manages the animation loop - creates frames, calls into the renderer
# at appropriate intervals, updates the time stored in master params, and sends frames
# out over OPC
controller = AnimationController(model, renderer, self.masterParams)
# a thread that periodically advances the active playlist within the renderer.
# TODO: example to demonstrate swapping between multiple playlists with custom fades
advancer = PlaylistAdvanceThread(renderer, switchInterval=self.interval)
advancer.start()
# A thread that listens for heartbeats and special effects. Heartbeats information
# will update the master parameters, which are available to all effect layers.
# Special effects will be added as the last layer of effects
pulseListenerThread = PulseListenerThread(self, self.masterParams)
pulseListenerThread.start()
try:
controller.drawingLoop()
except KeyboardInterrupt:
pulseListenerThread.terminate()
def main(screen):
# master parameters, used in rendering and updated by playlist advancer thread
masterParams = EffectParameters()
# if we got a curses screen, use it for button emulation through the keyboard
if screen:
# re-open stdout with a buffer size of 0. this makes print commands work again.
sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
screen.clear()
screen.refresh()
# put keyboard state into effect parameters
keymonitor = KeyboardMonitorThread(masterParams, screen)
keymonitor.start()
# model = SomaModel('../../cad/SomaPointParsing/input_points.json')
model = SomaModel()
# a playlist. each entry in a playlist can contain one or more effect layers
# (if more than one, they are all rendered into the same frame...mixing method
# is determined by individual effect layers' render implementations)
playlist = Playlist([
# [
# RandomPhaseLayer(model),
# ColorCycleLayer()
# ],
# [
# ColorPaletteBattleLayer(model)
# ],
[HolidayColorWiper(model,
colors=[(204,31,31), (36,143,0), (255,255,255)],
timer=3
)
],
# [
#PhotoColorsLayer(model),
# InvertColorsLayer(),
#InvertColorByRegionLayer(model),
# ],
# [
# SineWaveLayer(color = (0.2, 0.5, 1)),
# # SomaTestLayer(),
# # ColorBlinkyLayer(),
# ],
# [
# PhotoColorsLayer(model),
# DimBrightButtonLayer(),
# # ColorWave(model),
# SpeckLayer(button=0),
# SpeckLayer(button=1),
# #PhotoColorsLayer(model),
# #DimBrightButtonLayer()
# #AddressTestLayer(),
# #TestPatternLayer(),
# #ColorWave(model),
# # ColorWiper(model),
# # MultiplierLayer(ColorWave(model), ColorWiper(model)),
# ],
# [
# FireflySwarmLayer(),
# ButtonTestLayer()
# RandomPhaseLayer(model)
# MultiplierLayer(AxonChaseLayer(),ColorWave(model))
# AxonChaseLayer(segments=['all'])
# ColorWave(model),
# ColorWave(model),
# AxonChaseLayer()
# ],
# [
# AxonChaseLayer(color=(0,1,0), trigger_threshold=0.2, cycle_time=1.5),
# AxonChaseLayer(color=(0,0,1), trigger_threshold=0.1, cycle_time=1.5),
# ],
])
# the renderer manages a playlist (or dict of multiple playlists), as well as transitions
# and gamma correction
renderer = Renderer(playlists={'all': playlist}, gamma=2.2)
# the controller manages the animation loop - creates frames, calls into the renderer
# at appropriate intervals, updates the time stored in master params, and sends frames
# out over OPC
controller = AnimationController(model, renderer, masterParams)
# a thread that periodically advances the active playlist within the renderer.
# TODO: example to demonstrate swapping between multiple playlists with custom fades
advancer = PlaylistAdvanceThread(renderer, switchInterval=10)
advancer.start()
# go!
controller.drawingLoop()
def main(screen, interval):
# master parameters, used in rendering and updated by playlist advancer thread
masterParams = EffectParameters()
# if we got a curses screen, use it for button emulation through the keyboard
if screen:
# re-open stdout with a buffer size of 0. this makes print commands work again.
sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
screen.clear()
screen.refresh()
# put keyboard state into effect parameters
keymonitor = KeyboardMonitorThread(masterParams, screen)
keymonitor.start()
else:
ButtonMonitorThread(masterParams).start()
model = SomaModel() #address_filename="../addresses.txt")
# a playlist. each entry in a playlist can contain one or more effect layers
# (if more than one, they are all rendered into the same frame...mixing method
# is determined by individual effect layers' render implementations)
playlist = Playlist([
# This is a very handy layer for debugging. Steps through LEDs in
# order of frame index in response to a button push, printing the
# address of the lit LED.
#[ControlledAddressTestLayer()],
#[TriangleWaveLayer()],
[
PhotoColorsLayer(model),
DimBrightButtonLayer(),
SpeckLayer(button=0),
SpeckLayer(button=1),
Lightning(),
Repair(),
],
[
MultiplierLayer(ColorWave(model, grayscale=True),
ColorWiper(model)),
Lightning(),
Repair(),
],
[
RandomPhaseLayer(model),
ColorCycleLayer(0.00003, 0.0001),
Lightning(),
Repair(),
],
#[
# ColorPaletteBattleLayer(model),
# Repair(),
#],
[
MorseLayer2([
"figure", "action", "light", "yang", "synergy",
"unity in dual", "SOMA"
], [
"ground", "intention", "darkness", "yin", "discord",
"order from chaos", "FLG"
]),
ColorCycleLayer(0.0003, 0.0005),
Lightning(),
Repair(),
],
])
# the renderer manages a playlist (or dict of multiple playlists), as well as transitions
# and gamma correction
renderer = Renderer(playlists={'all': playlist}, gamma=2.2)
# the controller manages the animation loop - creates frames, calls into the renderer
# at appropriate intervals, updates the time stored in master params, and sends frames
# out over OPC
controller = AnimationController(model, renderer, masterParams)
# a thread that periodically advances the active playlist within the renderer.
# TODO: example to demonstrate swapping between multiple playlists with custom fades
advancer = PlaylistAdvanceThread(renderer, switchInterval=interval)
advancer.start()
# go!
controller.drawingLoop()
def main(screen, interval):
# master parameters, used in rendering and updated by playlist advancer thread
masterParams = EffectParameters()
# if we got a curses screen, use it for button emulation through the keyboard
if screen:
# re-open stdout with a buffer size of 0. this makes print commands work again.
sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
screen.clear()
screen.refresh()
# put keyboard state into effect parameters
keymonitor = KeyboardMonitorThread(masterParams, screen)
keymonitor.start()
else:
ButtonMonitorThread(masterParams).start()
model = SomaModel() #address_filename="../addresses.txt")
# a playlist. each entry in a playlist can contain one or more effect layers
# (if more than one, they are all rendered into the same frame...mixing method
# is determined by individual effect layers' render implementations)
playlist = Playlist([
# This is a very handy layer for debugging. Steps through LEDs in
# order of frame index in response to a button push, printing the
# address of the lit LED.
#[ControlledAddressTestLayer()],
#[TriangleWaveLayer()],
[
PhotoColorsLayer(model),
DimBrightButtonLayer(),
SpeckLayer(button=0),
SpeckLayer(button=1),
Repair(),
],
[
MultiplierLayer(ColorWave(model, grayscale=True), ColorWiper(model)),
Repair(),
],
[
RandomPhaseLayer(model),
ColorCycleLayer(0.00003, 0.0001),
Lightning(),
Repair(),
],
[
ColorPaletteBattleLayer(model),
Repair(),
],
[
MorseLayer2(["figure", "action", "light", "yang", "synergy", "unity in dual", "SOMA"], ["ground", "intention", "darkness", "yin", "discord", "order from chaos", "FLG"]),
ColorCycleLayer(0.0003, 0.0005),
Lightning(),
Repair(),
],
])
# the renderer manages a playlist (or dict of multiple playlists), as well as transitions
# and gamma correction
renderer = Renderer(playlists={'all': playlist}, gamma=2.2)
# the controller manages the animation loop - creates frames, calls into the renderer
# at appropriate intervals, updates the time stored in master params, and sends frames
# out over OPC
controller = AnimationController(model, renderer, masterParams)
# a thread that periodically advances the active playlist within the renderer.
# TODO: example to demonstrate swapping between multiple playlists with custom fades
advancer = PlaylistAdvanceThread(renderer, switchInterval=interval)
advancer.start()
# go!
controller.drawingLoop()
def main(screen):
# master parameters, used in rendering and updated by playlist advancer thread
masterParams = EffectParameters()
# if we got a curses screen, use it for button emulation through the keyboard
if screen:
# re-open stdout with a buffer size of 0. this makes print commands work again.
sys.stdout = os.fdopen(sys.stdout.fileno(), 'w', 0)
screen.clear()
screen.refresh()
# put keyboard state into effect parameters
keymonitor = KeyboardMonitorThread(masterParams, screen)
keymonitor.start()
# model = SomaModel('../../cad/SomaPointParsing/input_points.json')
model = SomaModel()
# a playlist. each entry in a playlist can contain one or more effect layers
# (if more than one, they are all rendered into the same frame...mixing method
# is determined by individual effect layers' render implementations)
playlist = Playlist([
# [
# RandomPhaseLayer(model),
# ColorCycleLayer()
# ],
# [
# ColorPaletteBattleLayer(model)
# ],
[
HolidayColorWiper(model,
colors=[(204, 31, 31), (36, 143, 0),
(255, 255, 255)],
timer=3)
],
# [
#PhotoColorsLayer(model),
# InvertColorsLayer(),
#InvertColorByRegionLayer(model),
# ],
# [
# SineWaveLayer(color = (0.2, 0.5, 1)),
# # SomaTestLayer(),
# # ColorBlinkyLayer(),
# ],
# [
# PhotoColorsLayer(model),
# DimBrightButtonLayer(),
# # ColorWave(model),
# SpeckLayer(button=0),
# SpeckLayer(button=1),
# #PhotoColorsLayer(model),
# #DimBrightButtonLayer()
# #AddressTestLayer(),
# #TestPatternLayer(),
# #ColorWave(model),
# # ColorWiper(model),
# # MultiplierLayer(ColorWave(model), ColorWiper(model)),
# ],
# [
# FireflySwarmLayer(),
# ButtonTestLayer()
# RandomPhaseLayer(model)
# MultiplierLayer(AxonChaseLayer(),ColorWave(model))
# AxonChaseLayer(segments=['all'])
# ColorWave(model),
# ColorWave(model),
# AxonChaseLayer()
# ],
# [
# AxonChaseLayer(color=(0,1,0), trigger_threshold=0.2, cycle_time=1.5),
# AxonChaseLayer(color=(0,0,1), trigger_threshold=0.1, cycle_time=1.5),
# ],
])
# the renderer manages a playlist (or dict of multiple playlists), as well as transitions
# and gamma correction
renderer = Renderer(playlists={'all': playlist}, gamma=2.2)
# the controller manages the animation loop - creates frames, calls into the renderer
# at appropriate intervals, updates the time stored in master params, and sends frames
# out over OPC
controller = AnimationController(model, renderer, masterParams)
# a thread that periodically advances the active playlist within the renderer.
# TODO: example to demonstrate swapping between multiple playlists with custom fades
advancer = PlaylistAdvanceThread(renderer, switchInterval=10)
advancer.start()
# go!
controller.drawingLoop()