Example #1
0
	def translate_header(self, header):
		self.sk2_mt.doc_units = uc2const.UNIT_PT
		center = [0.0, 0.0]
		p = [self.wwidth, self.wheight]
		x0, y0 = apply_trafo_to_point(center, self.get_trafo())
		x1, y1 = apply_trafo_to_point(p, self.get_trafo())
		width = abs(x1 - x0)
		height = abs(y1 - y0)

		ornt = uc2const.PORTRAIT
		if width > height: ornt = uc2const.LANDSCAPE
		page_fmt = ['Custom', (width, height), ornt]

		pages_obj = self.sk2_mtds.get_pages_obj()
		pages_obj.page_format = page_fmt
		self.page = sk2_model.Page(pages_obj.config, pages_obj, 'WMF page')
		self.page.page_format = deepcopy(page_fmt)
		pages_obj.childs = [self.page, ]
		pages_obj.page_counter = 1

		self.layer = sk2_model.Layer(self.page.config, self.page)
		self.page.childs = [self.layer, ]

		for record in header.childs:
			try:
				self.translate_record(record)
			except:
				print wmfconst.WMF_RECORD_NAMES[record.func]
				for item in sys.exc_info(): print item
Example #2
0
	def render_image(self, ctx, obj):
		if not obj.cache_cdata: libimg.update_image(self.cms, obj)

		canvas_matrix = ctx.get_matrix()
		canvas_trafo = libcairo.get_trafo_from_matrix(canvas_matrix)
		zoom = canvas_trafo[0]

		h = obj.size[1]
		lu_corner = libgeom.apply_trafo_to_point([0.0, float(h)], obj.trafo)
		x0, y0 = libgeom.apply_trafo_to_point(lu_corner, canvas_trafo)

		m11, m12, m21, m22 = obj.trafo[:4]
		matrix = cairo.Matrix(zoom * m11, -zoom * m12,
							- zoom * m21, zoom * m22, x0, y0)
		ctx.set_matrix(matrix)

		if self.contour_flag:
			if not obj.cache_gray_cdata:
				libimg.update_gray_image(self.cms, obj)
			ctx.set_source_surface(obj.cache_gray_cdata)
			if zoom * abs(m11) > .98:
				ctx.get_source().set_filter(cairo.FILTER_NEAREST)
			ctx.paint_with_alpha(0.3)
		else:
			ctx.set_source_surface(obj.cache_cdata)
			if zoom * abs(m11) > .98:
				ctx.get_source().set_filter(cairo.FILTER_NEAREST)
			ctx.paint()

		ctx.set_matrix(canvas_matrix)
Example #3
0
	def get_path(self):
		ret = [[], [], self.closed]
		inv_trafo = libgeom.invert_trafo(self.trafo)
		ret[0] = libgeom.apply_trafo_to_point(self.start_point.point, inv_trafo)
		for item in self.points:
			ret[1].append(libgeom.apply_trafo_to_point(item.point, inv_trafo))
		return ret
Example #4
0
	def apply_trafo(self, trafo):
		if len(self.point) == 2:
			self.point = libgeom.apply_trafo_to_point(self.point, trafo)
		else:
			p0, p1, p2, marker = deepcopy(self.point)
			p1 = libgeom.apply_trafo_to_point(p1, trafo)
			p2 = libgeom.apply_trafo_to_point(p2, trafo)
			self.point = [p0, p1, p2, marker]
Example #5
0
	def tr_rectangle(self, chunk):
		bottom, right, top, left = get_data('<hhhh', chunk)
		left, top = apply_trafo_to_point([left, top], self.get_trafo())
		right, bottom = apply_trafo_to_point([right, bottom], self.get_trafo())

		cfg = self.layer.config
		sk2_style = self.get_style()
		rect = [left, top, right - left, bottom - top]
		rect = sk2_model.Rectangle(cfg, self.layer, rect, style=sk2_style)
		self.layer.childs.append(rect)
Example #6
0
	def tr_round_rectangle(self, chunk):
		eh, ew, bottom, right, top, left = get_data('<hhhhhh', chunk)
		corners = 4 * [0.0, ]
		if eh and ew:
			coef = max(ew / abs(right - left), eh / abs(bottom - top))
			corners = 4 * [coef, ]
		left, top = apply_trafo_to_point([left, top], self.get_trafo())
		right, bottom = apply_trafo_to_point([right, bottom], self.get_trafo())

		cfg = self.layer.config
		sk2_style = self.get_style()
		rect = [left, top, right - left, bottom - top]
		rect = sk2_model.Rectangle(cfg, self.layer, rect,
								style=sk2_style, corners=corners)
		self.layer.childs.append(rect)
Example #7
0
	def tr_textout(self, chunk):
		length = get_data('<h', chunk[:2])[0]

		encoding = self.get_encoding()
		txt = chunk[8:8 + length].decode(encoding)
		txt_length = len(txt)
		txt = txt.encode('utf-8')
		y, x, = get_data('<hhhh', chunk[8 + length:16 + length])
		p = apply_trafo_to_point([x, y], self.get_trafo())

		cfg = self.layer.config
		sk2_style, tags = self.get_text_style()
		markup = [[tags, (0, txt_length)]]
		tr = [] + libgeom.NORMAL_TRAFO
		text = sk2_model.Text(cfg, self.layer, p, txt, -1, tr, sk2_style)
		text.markup = markup
		if self.dc.opacity:
			bg_style = [[], [], [], []]
			clr = [] + self.dc.bgcolor
			clr = [uc2const.COLOR_RGB, clr, 1.0, '', '']
			bg_style[0] = [sk2_const.FILL_EVENODD, sk2_const.FILL_SOLID, clr]
			text.update()
			bbox = [] + text.cache_bbox
			rect = bbox[:2] + [bbox[2] - bbox[0], bbox[3] - bbox[1]]
			rect = sk2_model.Rectangle(cfg, self.layer, rect, style=bg_style)
			self.layer.childs.append(rect)
		if self.dc.font[-2]:
			tr = libgeom.trafo_rotate_grad(self.dc.font[-2], p[0], p[1])
			text.trafo = libgeom.multiply_trafo(text.trafo, tr)
			if self.dc.opacity:
				rect.trafo = libgeom.multiply_trafo(rect.trafo, tr)
		self.layer.childs.append(text)
Example #8
0
	def apply_trafo(self, trafo):
		p = libgeom.apply_trafo_to_point(self.get_point(), trafo)
		if self.point == self.base_point:
			self.point.point[1] = p
		else:
			self.point.point[0] = p
		self.point.update_connection()
Example #9
0
	def update_bbox(self):
		bp = libgeom.apply_trafo_to_point([0.0, 0.0], self.trafo)
		self.cache_bbox = 2 * bp
		index = 0
		for item in self.cache_cpath:
			if not item:
				data = self.cache_layout_data[index]
				bp = [data[0], data[4]]
				bbox = 2 * libgeom.apply_trafo_to_point(bp, self.trafo)
			else:
				bbox = libgeom.get_cpath_bbox(item)
			if not self.cache_bbox:
				self.cache_bbox = bbox
			else:
				self.cache_bbox = libgeom.sum_bbox(self.cache_bbox, bbox)
			index += 1
Example #10
0
	def tr_stretch_dib(self, chunk):
		src_h, src_w, = get_data('<hh', chunk[6:10])
		dst_h, dst_w, dst_y, dst_x = get_data('<hhhh', chunk[14:22])
		imagestr = wmflib.dib_to_imagestr(chunk[22:])

		tr = self.get_trafo()
		p0 = apply_trafo_to_point([dst_x, dst_y], tr)
		p1 = apply_trafo_to_point([dst_w + dst_x, dst_h + dst_y], tr)
		w = abs(p1[0] - p0[0])
		h = abs(p1[1] - p0[1])
		trafo = [w / src_w, 0.0, 0.0, h / src_h, p0[0], p0[1] - h]

		pixmap = sk2_model.Pixmap(self.layer.config)

		libimg.set_image_data(self.sk2_doc.cms, pixmap, imagestr)
		pixmap.trafo = trafo
		self.layer.childs.append(pixmap)
Example #11
0
	def tr_arc(self, chunk, arc_type=sk2_const.ARC_ARC):
		ye, xe, ys, xs, bottom, right, top, left = get_data('<hhhhhhhh',
																chunk)
		left, top = apply_trafo_to_point([left, top], self.get_trafo())
		right, bottom = apply_trafo_to_point([right, bottom], self.get_trafo())
		xs, ys = apply_trafo_to_point([xs, ys], self.get_trafo())
		xe, ye = apply_trafo_to_point([xe, ye], self.get_trafo())

		if left != right and top != bottom:
			t = [(right - left) / 2, 0, 0, (bottom - top) / 2,
						(right + left) / 2, (top + bottom) / 2]
			t = libgeom.invert_trafo(t)
			xs, ys = apply_trafo_to_point([xs, ys], t)
			xe, ye = apply_trafo_to_point([xe, ye], t)
			end_angle = libgeom.get_point_angle([xs, ys], [0.0, 0.0])
			start_angle = libgeom.get_point_angle([xe, ye], [0.0, 0.0])
		else:
			start_angle = end_angle = 0.0

		cfg = self.layer.config
		sk2_style = self.get_style()
		if arc_type == sk2_const.ARC_ARC: sk2_style[0] = []
		rect = [left, top, right - left, bottom - top]
		ellipse = sk2_model.Circle(cfg, self.layer, rect, start_angle,
								end_angle, arc_type, sk2_style)
		self.layer.childs.append(ellipse)
Example #12
0
    def tr_round_rectangle(self, chunk):
        eh, ew, bottom, right, top, left = get_data('<hhhhhh', chunk)
        corners = 4 * [
            0.0,
        ]
        if eh and ew:
            coef = max(ew / abs(right - left), eh / abs(bottom - top))
            corners = 4 * [
                coef,
            ]
        left, top = apply_trafo_to_point([left, top], self.get_trafo())
        right, bottom = apply_trafo_to_point([right, bottom], self.get_trafo())

        cfg = self.layer.config
        sk2_style = self.get_style()
        rect = [left, top, right - left, bottom - top]
        rect = sk2_model.Rectangle(cfg,
                                   self.layer,
                                   rect,
                                   style=sk2_style,
                                   corners=corners)
        self.layer.childs.append(rect)
Example #13
0
	def apply_moving(self, event, start=False, final=False):
		point = event.get_point()
		wpoint = self.canvas.point_win_to_doc(point)
		invtrafo = libgeom.invert_trafo(self.target.trafo)
		x, y = libgeom.apply_trafo_to_point(wpoint, invtrafo)
		x -= 0.5
		y -= 0.5
		angle = 0.0
		if x > 0 and y > 0:
			angle = math.atan(y / x)
		elif x == 0 and y > 0:
			angle = math.pi / 2.0
		elif x < 0 and y > 0:
			angle = math.atan(-x / y) + math.pi / 2.0
		elif x < 0 and y == 0:
			angle = math.pi
		elif x < 0 and y < 0:
			angle = math.atan(y / x) + math.pi
		elif x == 0 and y < 0:
			angle = 1.5 * math.pi
		elif x > 0 and y < 0:
			angle = math.atan(x / -y) + 1.5 * math.pi
		elif x > 0 and y == 0:
			angle = 0.0
		elif x == 0 and y == 0:
			return
		if event.is_ctrl():
			fixed_angle = math.pi * config.ellipse_fixed_angle / 180.0
			angle //= fixed_angle
			angle *= fixed_angle
		else:
			contra_point = self.start_point
			if start:contra_point = self.end_point
			if contra_point.is_pressed(point):
				angle = contra_point.get_angle()
		circle_type = self.orig_type
		if event.is_alt() and not circle_type == sk2_const.ARC_ARC:
			circle_type = sk2_const.ARC_CHORD
			if libgeom.distance([x, y]) < 0.5:
				circle_type = sk2_const.ARC_PIE_SLICE
		angle1 = self.orig_angle1
		angle2 = self.orig_angle2
		if start: angle1 = angle
		else: angle2 = angle
		if final:
			self.api.set_circle_properties_final(circle_type, angle1, angle2,
				self.orig_type, self.orig_angle1, self.orig_angle2, self.target)
		else:
			self.api.set_circle_properties(circle_type, angle1,
										angle2, self.target)
		self.update_points()
    def translate_header(self, header):
        self.sk2_mt.doc_units = uc2const.UNIT_PT
        center = [0.0, 0.0]
        p = [self.wwidth, self.wheight]
        x0, y0 = apply_trafo_to_point(center, self.get_trafo())
        x1, y1 = apply_trafo_to_point(p, self.get_trafo())
        width = abs(x1 - x0)
        height = abs(y1 - y0)

        ornt = uc2const.PORTRAIT
        if width > height:
            ornt = uc2const.LANDSCAPE
        page_fmt = ['Custom', (width, height), ornt]

        pages_obj = self.sk2_mtds.get_pages_obj()
        pages_obj.page_format = page_fmt
        self.page = sk2_model.Page(pages_obj.config, pages_obj, 'WMF page')
        self.page.page_format = deepcopy(page_fmt)
        pages_obj.childs = [
            self.page,
        ]
        pages_obj.page_counter = 1

        self.layer = sk2_model.Layer(self.page.config, self.page)
        self.page.childs = [
            self.layer,
        ]

        for record in header.childs:
            try:
                self.translate_record(record)
            except Exception as e:
                LOG.error('ERREC-->%s',
                          wmf_const.WMF_RECORD_NAMES[record.func])
                LOG.error('Record index %s', str(header.childs.index(record)))
                LOG.error('Error: %s', e)
Example #15
0
    def _text(self, element):
        (x, y), chunk = self.read_point(element.params)
        flg, chunk = self.read_enum(chunk)
        txt, chunk = self.read_str(chunk)
        p0 = libgeom.apply_trafo_to_point([x, y], self.get_trafo())

        py, px = self.cgm['text.orientation']
        py = libgeom.normalize_point(py)
        px = libgeom.normalize_point(px)
        tr = libgeom.sub_points(px, p0) + libgeom.sub_points(py, p0) + p0

        text = sk2_model.Text(self.layer.config, self.layer,
                              p0, txt, -1,
                              style=self.get_style(text=True))
        self.layer.childs.append(text)
Example #16
0
 def get_vector(path, trafo):
     p0 = p1 = path[0]
     is_cp = libgeom.is_curve_point
     t = 0.001
     for point in path[1]:
         p0 = point[0] if is_cp(point) else point
         if not p0 == p1:
             break
         elif is_cp(point) and p1 != point[2]:
             p0 = libgeom.split_bezier_curve(p1, point, t)[0][2]
             break
     return [
         libgeom.apply_trafo_to_point(p, trafo)
         for p in (p0, p1)
     ]
Example #17
0
    def apply_rounding(self, point, final=False, inplace=False):
        wpoint = self.canvas.point_win_to_doc(point)
        invtrafo = libgeom.invert_trafo(self.target.trafo)
        wpoint = libgeom.apply_trafo_to_point(wpoint, invtrafo)
        corners = [] + self.target.corners
        name = str(self.rnd_index) + str(self.rnd_subindex)

        if self.stop2:
            val = abs(wpoint[0] - self.start[0])
            val2 = abs(wpoint[1] - self.start[1])
            start = self.start
            if val > val2:
                if self.rnd_index in (0, 2):
                    stop = self.stop2
                    res = (wpoint[0] - start[0]) / (stop[0] - start[0])
                else:
                    stop = self.stop
                    res = (wpoint[0] - start[0]) / (stop[0] - start[0])
            else:
                if self.rnd_index in (0, 2):
                    stop = self.stop
                    res = (wpoint[1] - start[1]) / (stop[1] - start[1])
                else:
                    stop = self.stop2
                    res = (wpoint[1] - start[1]) / (stop[1] - start[1])
        else:
            start = self.start
            stop = self.stop
            if name in H_ORIENT:
                res = (wpoint[0] - start[0]) / (stop[0] - start[0])
            else:
                res = (wpoint[1] - start[1]) / (stop[1] - start[1])

        if res < 0.0:
            res = 0.0
        if res > 1.0:
            res = 1.0

        if inplace:
            corners[self.rnd_index] = res
        else:
            corners = [res, res, res, res]
        if final:
            self.api.set_rect_corners_final(corners, self.orig_corners,
                                            self.target)
        else:
            self.api.set_rect_corners(corners, self.target)
        self.update_points()
Example #18
0
	def get_trafo(self):
		trafo = [] + sk2_const.NORMAL_TRAFO
		bbox = self.get_selection_bbox()
		w, h = self.get_selection_size()
		new_w = self.h_spin.get_point_value()
		new_h = self.v_spin.get_point_value()
		trafo[0] = new_w / w
		trafo[3] = new_h / h

		bp = [bbox[0] + w * (1.0 + self.orientation[0]) / 2.0,
			bbox[1] + h * (1.0 + self.orientation[1]) / 2.0]

		new_bp = libgeom.apply_trafo_to_point(bp, trafo)
		trafo[4] = bp[0] - new_bp[0]
		trafo[5] = bp[1] - new_bp[1]
		return trafo
Example #19
0
    def translate_text(self, obj, cfg):
        trafo_rotate = libgeom.trafo_rotate(obj.angle)
        base_point = libgeom.apply_trafo_to_point([obj.x, obj.y], self.trafo)
        base_point[1] -= obj.font_size
        trafo = [72.0 / 90.0, 0.0, 0.0, 72.0 / 90.0] + base_point
        trafo = libgeom.multiply_trafo(trafo_rotate, trafo)
        text_style = self.get_text_style(obj)
        props = dict(point=[0.0, obj.font_size],
                     style=text_style,
                     text=obj.string,
                     trafo=trafo)
        new_obj = sk2_model.Text(cfg, **props)

        txt_length = len(obj.string)
        tags = []
        new_obj.markup = [[tags, (0, txt_length)]]
        return new_obj
Example #20
0
    def get_index_by_point(self, point):
        doc_point = self.canvas.win_to_doc(point)
        inv_trafo = libgeom.invert_trafo(self.target.trafo)
        doc_point = libgeom.apply_trafo_to_point(doc_point, inv_trafo)

        line = -1
        for item in self.target.cache_line_points:
            line += 1
            if doc_point[1] >= item[1]: break

        index = self.lines[line][0]
        for item in range(*self.lines[line]):
            layout = self.target.cache_layout_data
            pos = layout[index][0] + layout[index][2] / 2.0
            if doc_point[0] <= pos: break
            index += 1
        return index
Example #21
0
	def apply_resizing(self, point, final=False):
		wpoint = self.canvas.point_win_to_doc(point)
		invtrafo = libgeom.invert_trafo(self.target.trafo)
		wpoint = libgeom.apply_trafo_to_point(wpoint, invtrafo)
		rect = self.target.get_rect()
		corners = [] + self.target.corners
		if self.res_index == 0:
			rect[2] -= wpoint[0] - rect[0]
			rect[0] = wpoint[0]
			if rect[2] < 0:
				self.res_index = 2
				c0, c1, c2, c3 = corners
				corners = [c3, c2, c1, c0]
		elif self.res_index == 1:
			rect[3] = wpoint[1] - rect[1]
			if rect[3] < 0:
				self.res_index = 3
				c0, c1, c2, c3 = corners
				corners = [c1, c0, c3, c2]
		elif self.res_index == 2:
			rect[2] = wpoint[0] - rect[0]
			if rect[2] < 0:
				self.res_index = 0
				c0, c1, c2, c3 = corners
				corners = [c3, c2, c1, c0]
		elif self.res_index == 3:
			rect[3] -= wpoint[1] - rect[1]
			rect[1] = wpoint[1]
			if rect[3] < 0:
				self.res_index = 1
				c0, c1, c2, c3 = corners
				corners = [c1, c0, c3, c2]
		rect = libgeom.normalize_rect(rect)
		if final:
			self.api.set_rect_final(self.target, rect, self.orig_rect)
			if not corners == self.orig_corners:
				self.api.set_rect_corners_final(corners, self.orig_corners,
										self.target)
				self.orig_corners = [] + self.target.corners
			self.orig_rect = self.target.get_rect()
		else:
			self.api.set_rect(self.target, rect)
			if not corners == self.target.corners:
				self.api.set_rect_corners(corners, self.target)
		self.update_points()
Example #22
0
	def apply_rounding(self, point, final=False, inplace=False):
		wpoint = self.canvas.point_win_to_doc(point)
		invtrafo = libgeom.invert_trafo(self.target.trafo)
		wpoint = libgeom.apply_trafo_to_point(wpoint, invtrafo)
		corners = [] + self.target.corners
		name = str(self.rnd_index) + str(self.rnd_subindex)

		res = 0.0
		if self.stop2:
			val = abs(wpoint[0] - self.start[0])
			val2 = abs(wpoint[1] - self.start[1])
			start = self.start
			if val > val2:
				if self.rnd_index in (0, 2):
					stop = self.stop2
					res = (wpoint[0] - start[0]) / (stop[0] - start[0])
				else:
					stop = self.stop
					res = (wpoint[0] - start[0]) / (stop[0] - start[0])
			else:
				if self.rnd_index in (0, 2):
					stop = self.stop
					res = (wpoint[1] - start[1]) / (stop[1] - start[1])
				else:
					stop = self.stop2
					res = (wpoint[1] - start[1]) / (stop[1] - start[1])
		else:
			start = self.start
			stop = self.stop
			if name in H_ORIENT:
				res = (wpoint[0] - start[0]) / (stop[0] - start[0])
			else:
				res = (wpoint[1] - start[1]) / (stop[1] - start[1])

		if res < 0.0: res = 0.0
		if res > 1.0: res = 1.0

		if inplace: corners[self.rnd_index] = res
		else: corners = [res, res, res, res]
		if final:
			self.api.set_rect_corners_final(corners, self.orig_corners,
										self.target)
		else:
			self.api.set_rect_corners(corners, self.target)
		self.update_points()
Example #23
0
 def apply_resizing(self, point, final=False):
     wpoint = self.canvas.point_win_to_doc(point)
     invtrafo = libgeom.invert_trafo(self.target.trafo)
     wpoint = libgeom.apply_trafo_to_point(wpoint, invtrafo)
     rect = self.target.get_rect()
     corners = [] + self.target.corners
     if self.res_index == 0:
         rect[2] -= wpoint[0] - rect[0]
         rect[0] = wpoint[0]
         if rect[2] < 0:
             self.res_index = 2
             c0, c1, c2, c3 = corners
             corners = [c3, c2, c1, c0]
     elif self.res_index == 1:
         rect[3] = wpoint[1] - rect[1]
         if rect[3] < 0:
             self.res_index = 3
             c0, c1, c2, c3 = corners
             corners = [c1, c0, c3, c2]
     elif self.res_index == 2:
         rect[2] = wpoint[0] - rect[0]
         if rect[2] < 0:
             self.res_index = 0
             c0, c1, c2, c3 = corners
             corners = [c3, c2, c1, c0]
     elif self.res_index == 3:
         rect[3] -= wpoint[1] - rect[1]
         rect[1] = wpoint[1]
         if rect[3] < 0:
             self.res_index = 1
             c0, c1, c2, c3 = corners
             corners = [c1, c0, c3, c2]
     rect = libgeom.normalize_rect(rect)
     if final:
         self.api.set_rect_final(self.target, rect, self.orig_rect)
         if not corners == self.orig_corners:
             self.api.set_rect_corners_final(corners, self.orig_corners,
                                             self.target)
             self.orig_corners = [] + self.target.corners
         self.orig_rect = self.target.get_rect()
     else:
         self.api.set_rect(self.target, rect)
         if not corners == self.target.corners:
             self.api.set_rect_corners(corners, self.target)
     self.update_points()
Example #24
0
    def _calc_bottom_scale_trafo(self, event):
        is_centering = event.is_shift()
        is_constraining = event.is_ctrl()
        is_snapping = not is_constraining

        m11, m21, m12, m22, dx, dy = sk2const.NORMAL_TRAFO
        start_point = self.canvas.win_to_doc(self.start)
        end_point = self.canvas.win_to_doc(self.end)
        bbox = self.presenter.selection.bbox
        middle_points = libgeom.bbox_middle_points(bbox)
        point = middle_points[3]
        base_y = bbox[3]
        h = libgeom.bbox_size(bbox)[1]

        if is_centering:
            shift_y = h / 2.0 + self.selection.center_offset[1]
            ratio_y = h / shift_y if shift_y else 1.0
            ratio_y = ratio_y if abs(ratio_y) < MAX_RATIO_TRAFO else 1.0
            shift_y = h - shift_y
        else:
            shift_y, ratio_y = 0.0, 1.0

        change_y = h + (start_point[1] - end_point[1]) * ratio_y
        if is_constraining and h and change_y:
            if -h < change_y < h:
                change_y = 1.0 / (h // change_y) * h
            else:
                change_y = h + (change_y - h / 2) // h * h

        m22 = change_y / h if h and change_y else 1.0
        dy = base_y - base_y * m22 + shift_y * (m22 - 1.0)

        if is_snapping:
            trafo = [m11, m21, m12, m22, dx, dy]
            p = libgeom.apply_trafo_to_point(point, trafo)
            flag, _wp, end_point = self.snap.snap_point(p, False)
            start_point = point
            if flag:
                change_y = h + (start_point[1] - end_point[1]) * ratio_y
                m22 = change_y / h if h else 1.0
                dy = base_y - base_y * m22 + shift_y * (m22 - 1.0)

        return [m11 or EPSILON, m21, m12, m22 or EPSILON, dx, dy]
Example #25
0
    def _calc_left_scale_trafo(self, event):
        is_centering = event.is_shift()
        is_constraining = event.is_ctrl()
        is_snapping = not is_constraining

        m11, m21, m12, m22, dx, dy = sk2const.NORMAL_TRAFO
        start_point = self.canvas.win_to_doc(self.start)
        end_point = self.canvas.win_to_doc(self.end)
        bbox = self.presenter.selection.bbox
        middle_points = libgeom.bbox_middle_points(bbox)
        point = middle_points[0]
        base_x = bbox[2]
        w = libgeom.bbox_size(bbox)[0]

        if is_centering:
            shift_x = w / 2.0 + self.selection.center_offset[0]
            ratio_x = w / shift_x if shift_x else 1.0
            ratio_x = ratio_x if abs(ratio_x) < MAX_RATIO_TRAFO else 1.0
            shift_x = w - shift_x
        else:
            shift_x, ratio_x = 0.0, 1.0

        change_x = w + (start_point[0] - end_point[0]) * ratio_x
        if is_constraining and w and change_x:
            if -w < change_x < w:
                change_x = 1.0 / (w // change_x) * w
            else:
                change_x = w + (change_x - w / 2) // w * w

        m11 = change_x / w if w and change_x else 1.0
        dx = base_x - base_x * m11 + shift_x * (m11 - 1.0)

        if is_snapping:
            trafo = [m11, m21, m12, m22, dx, dy]
            p = libgeom.apply_trafo_to_point(point, trafo)
            flag, _wp, end_point = self.snap.snap_point(p, False)
            start_point = point
            if flag:
                change_x = w + (start_point[0] - end_point[0]) * ratio_x
                m11 = change_x / w if w else 1.0
                dx = base_x - base_x * m11 + shift_x * (m11 - 1.0)

        return [m11 or EPSILON, m21, m12, m22 or EPSILON, dx, dy]
Example #26
0
	def get_trafo(self):
		angle1 = self.h_shear.get_angle_value()
		angle2 = self.v_shear.get_angle_value()

		m12 = math.tan(angle1)
		m21 = math.tan(angle2)
		m11 = 1.0
		m22 = 1.0 - (m12 * m21)
		trafo = [m11, m21, -m12, m22, 0, 0]

		bbox = self.get_selection_bbox()
		w, h = self.get_selection_size()
		bp = [bbox[0] + w * (1.0 + self.orientation[0]) / 2.0,
			bbox[1] + h * (1.0 + self.orientation[1]) / 2.0]

		new_bp = libgeom.apply_trafo_to_point(bp, trafo)
		trafo[4] = bp[0] - new_bp[0]
		trafo[5] = bp[1] - new_bp[1]
		return trafo
    def get_trafo(self):
        trafo = [] + sk2const.NORMAL_TRAFO
        bbox = self.get_selection_bbox()
        w, h = self.get_selection_size()
        trafo[0] = self.h_spin.get_value() / 100.0
        trafo[3] = self.v_spin.get_value() / 100.0

        if self.h_mirror.get_value():
            trafo[0] *= -1.0
        if self.v_mirror.get_value():
            trafo[3] *= -1.0

        bp = [
            bbox[0] + w * (1.0 + self.orientation[0]) / 2.0,
            bbox[1] + h * (1.0 + self.orientation[1]) / 2.0
        ]

        new_bp = libgeom.apply_trafo_to_point(bp, trafo)
        trafo[4] = bp[0] - new_bp[0]
        trafo[5] = bp[1] - new_bp[1]
        return trafo
Example #28
0
	def apply_midpoint_change(self, point, index, control=False, final=False):
		wpoint = self.canvas.point_win_to_doc(point)
		invtrafo = libgeom.invert_trafo(self.target.trafo)
		x, y = libgeom.apply_trafo_to_point(wpoint, invtrafo)
		radius = self.target.get_midpoint_radius()
		angle = self.target.get_midpoint_angle(index)
		coef2 = libgeom.get_point_radius([x, y]) / radius
		if control:
			props = [self.orig_angle1, self.orig_angle2,
					self.orig_coef1, coef2]
		else:
			angle2 = libgeom.get_point_angle([x, y]) - angle
			props = [self.orig_angle1, angle2,
					self.orig_coef1, coef2]
		if final:
			props_before = [self.orig_angle1, self.orig_angle2,
					self.orig_coef1, self.orig_coef2]
			self.api.set_polygon_properties_final(props, props_before,
												self.target)
		else:
			self.api.set_polygon_properties(props, self.target)
		self.update_points()
    def tr_exttextout(self, chunk):
        y, x, length = get_data('<hhh', chunk[:6])
        dl = 0
        if length % 2:
            length += 1
            dl += 1
        p = apply_trafo_to_point([x, y], self.get_trafo())

        encoding = self.get_encoding()
        pos = 16 if not len(chunk) - 8 == length else 8
        txt = chunk[pos:pos + length - dl].decode(encoding)
        txt_length = len(txt)
        txt = txt.encode('utf-8')

        cfg = self.layer.config
        sk2_style, tags = self.get_text_style()
        markup = [[tags, (0, txt_length)]]
        tr = [] + libgeom.NORMAL_TRAFO

        text = sk2_model.Text(cfg, self.layer, p, txt, -1, tr, sk2_style)
        text.markup = markup
        rect = None
        if self.dc.opacity:
            bg_style = [[], [], [], []]
            clr = [] + self.dc.bgcolor
            clr = [uc2const.COLOR_RGB, clr, 1.0, '', '']
            bg_style[0] = [sk2const.FILL_EVENODD, sk2const.FILL_SOLID, clr]
            text.update()
            bbox = [] + text.cache_bbox
            rect = bbox[:2] + [bbox[2] - bbox[0], bbox[3] - bbox[1]]
            rect = sk2_model.Rectangle(cfg, self.layer, rect, style=bg_style)
            rect.trafo = tr
            self.layer.childs.append(rect)
        if self.dc.font[-2]:
            tr = libgeom.trafo_rotate_grad(self.dc.font[-2], p[0], p[1])
            text.trafo = libgeom.multiply_trafo(text.trafo, tr)
            if self.dc.opacity:
                rect.trafo = libgeom.multiply_trafo(rect.trafo, tr)
        self.layer.childs.append(text)
Example #30
0
 def apply_midpoint_change(self, point, index, control=False, final=False):
     wpoint = self.canvas.point_win_to_doc(point)
     invtrafo = libgeom.invert_trafo(self.target.trafo)
     x, y = libgeom.apply_trafo_to_point(wpoint, invtrafo)
     radius = self.target.get_midpoint_radius()
     angle = self.target.get_midpoint_angle(index)
     coef2 = libgeom.get_point_radius([x, y]) / radius
     if control:
         props = [self.orig_angle1, self.orig_angle2,
                  self.orig_coef1, coef2]
     else:
         angle2 = libgeom.get_point_angle([x, y]) - angle
         props = [self.orig_angle1, angle2,
                  self.orig_coef1, coef2]
     if final:
         props_before = [self.orig_angle1, self.orig_angle2,
                         self.orig_coef1, self.orig_coef2]
         self.api.set_polygon_properties_final(props, props_before,
                                               self.target)
     else:
         self.api.set_polygon_properties(props, self.target)
     self.update_points()
Example #31
0
 def apply_trafo_before(self, trafo):
     if not len(self.point) == 2:
         p0, p1, p2, marker = deepcopy(self.point)
         p0 = libgeom.apply_trafo_to_point(p0, trafo)
         self.point = [p0, p1, p2, marker]
Example #32
0
    def _calc_bottom_right_scale_trafo(self, event):
        is_centering = event.is_shift()
        is_constraining = event.is_ctrl()
        is_snapping = True

        m11, m21, m12, m22, dx, dy = sk2const.NORMAL_TRAFO
        start_point = self.canvas.win_to_doc(self.start)
        end_point = self.canvas.win_to_doc(self.end)
        bbox = self.presenter.selection.bbox
        bbox_points = libgeom.bbox_points(bbox)
        point = bbox_points[2]
        base_x, base_y = bbox_points[1]
        w, h = libgeom.bbox_size(bbox)

        if is_centering:
            shift_x = w / 2.0 - self.selection.center_offset[0]
            shift_y = h / 2.0 + self.selection.center_offset[1]

            ratio_x = w / shift_x if shift_x else 1.0
            ratio_y = h / shift_y if shift_y else 1.0

            ratio_x = ratio_x if abs(ratio_x) < MAX_RATIO_TRAFO else 1.0
            ratio_y = ratio_y if abs(ratio_y) < MAX_RATIO_TRAFO else 1.0

            shift_x = shift_x - w
            shift_y = h - shift_y
        else:
            shift_x, ratio_x = 0.0, 1.0
            shift_y, ratio_y = 0.0, 1.0

        change_x = w + (end_point[0] - start_point[0]) * ratio_x
        change_y = h + (start_point[1] - end_point[1]) * ratio_y
        if is_constraining:
            if w < h:
                m11 = m22 = change_x / w if w and change_x else 1.0
            else:
                m11 = m22 = change_y / h if h and change_y else 1.0
        else:
            m11 = change_x / w if w and change_x else 1.0
            m22 = change_y / h if h and change_y else 1.0

        dx = base_x - base_x * m11 + shift_x * (m11 - 1.0)
        dy = base_y - base_y * m22 + shift_y * (m22 - 1.0)

        if is_snapping:
            trafo = [m11, m21, m12, m22, dx, dy]
            p = libgeom.apply_trafo_to_point(point, trafo)
            flag, _wp, end_point = self.snap.snap_point(p, False)
            start_point = point
            if flag:
                change_x = w + (end_point[0] - start_point[0]) * ratio_x
                change_y = h + (start_point[1] - end_point[1]) * ratio_y

                if is_constraining:
                    if self.snap.active_snap[0] is not None:
                        m11 = m22 = change_x / w if w and change_x else 1.0
                    else:
                        m11 = m22 = change_y / h if h and change_y else 1.0
                else:
                    m11 = change_x / w if w and change_x else 1.0
                    m22 = change_y / h if h and change_y else 1.0

                dx = base_x - base_x * m11 + shift_x * (m11 - 1.0)
                dy = base_y - base_y * m22 + shift_y * (m22 - 1.0)

        return [m11 or EPSILON, m21, m12, m22 or EPSILON, dx, dy]
Example #33
0
	def get_point(self):
		return libgeom.apply_trafo_to_point(self.point, self.target.trafo)
Example #34
0
	def _calc_trafo(self, event):
		control = shift = False
		if event.state & gtk.gdk.CONTROL_MASK:
			control = True
		if event.state & gtk.gdk.SHIFT_MASK:
			shift = True
		mark = self.canvas.resize_marker
		start_point = self.canvas.win_to_doc(self.start)
		end_point = self.canvas.win_to_doc(self.end)
		bbox = self.presenter.selection.bbox
		middle_points = libgeom.bbox_middle_points(bbox)
		w = bbox[2] - bbox[0]
		h = bbox[3] - bbox[1]
		m11 = m22 = 1.0
		m12 = m21 = 0.0
		dx = dy = 0.0
		snap = [None, None]
		if mark == 0:
			dx = start_point[0] - end_point[0]
			dy = end_point[1] - start_point[1]
			if shift:
				if control:
					m11 = (w + 2.0 * dx) / w
					m22 = (h + 2.0 * dy) / h
					dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
					dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = (w + 2.0 * dx) / w
						dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					point = middle_points[1]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = p_doc[1] - point[1]
						m22 = (h + 2.0 * dy) / h
						dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + 2.0 * dx) / w
					else:
						m11 = m22 = (h + 2.0 * dy) / h
					dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
					dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = m22 = (w + 2.0 * dx) / w
						dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
						dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[1]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = p_doc[1] - point[1]
							m11 = m22 = (h + 2.0 * dy) / h
							dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
							dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
			else:
				if control:
					m11 = (w + dx) / w
					m22 = (h + dy) / h
					dx = -(bbox[2] * m11 - bbox[2])
					dy = -(bbox[1] * m22 - bbox[1])
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = (w + dx) / w
						dx = -(bbox[2] * m11 - bbox[2])
						snap[0] = self.snap.active_snap[0]
					point = middle_points[1]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = p_doc[1] - point[1]
						m22 = (h + dy) / h
						dy = -(bbox[1] * m22 - bbox[1])
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + dx) / w
					else:
						m11 = m22 = (h + dy) / h
					dx = -(bbox[2] * m11 - bbox[2])
					dy = -(bbox[1] * m22 - bbox[1])
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = m22 = (w + dx) / w
						dx = -(bbox[2] * m11 - bbox[2])
						dy = -(bbox[1] * m22 - bbox[1])
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[1]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = p_doc[1] - point[1]
							m11 = m22 = (h + dy) / h
							dx = -(bbox[2] * m11 - bbox[2])
							dy = -(bbox[1] * m22 - bbox[1])
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
		if mark == 1:
			dy = end_point[1] - start_point[1]
			if shift:
				m22 = (h + 2.0 * dy) / h
				dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
				#---- snapping
				point = middle_points[1]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dy = p_doc[1] - point[1]
				m22 = (h + 2.0 * dy) / h
				dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
				#---- snapping
			else:
				m22 = (h + dy) / h
				dy = -(bbox[1] * m22 - bbox[1])
				#---- snapping
				point = middle_points[1]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dy = p_doc[1] - point[1]
				m22 = (h + dy) / h
				dy = -(bbox[1] * m22 - bbox[1])
				#---- snapping
		if mark == 2:
			dx = end_point[0] - start_point[0]
			dy = end_point[1] - start_point[1]
			if shift:
				if control:
					m11 = (w + 2.0 * dx) / w
					m22 = (h + 2.0 * dy) / h
					dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
					dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = (w + 2.0 * dx) / w
						dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					point = middle_points[1]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = p_doc[1] - point[1]
						m22 = (h + 2.0 * dy) / h
						dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + 2.0 * dx) / w
					else:
						m11 = m22 = (h + 2.0 * dy) / h
					dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
					dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = m22 = (w + 2.0 * dx) / w
						dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
						dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[1]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = p_doc[1] - point[1]
							m11 = m22 = (h + 2.0 * dy) / h
							dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
							dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
			else:
				if control:
					m11 = (w + dx) / w
					m22 = (h + dy) / h
					dx = -(bbox[0] * m11 - bbox[0])
					dy = -(bbox[1] * m22 - bbox[1])
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = (w + dx) / w
						dx = -(bbox[0] * m11 - bbox[0])
						snap[0] = self.snap.active_snap[0]
					point = middle_points[1]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = p_doc[1] - point[1]
						m22 = (h + dy) / h
						dy = -(bbox[1] * m22 - bbox[1])
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + dx) / w
					else:
						m11 = m22 = (h + dy) / h
					dx = -(bbox[0] * m11 - bbox[0])
					dy = -(bbox[1] * m22 - bbox[1])
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = m22 = (w + dx) / w
						dx = -(bbox[0] * m11 - bbox[0])
						dy = -(bbox[1] * m22 - bbox[1])
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[1]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = p_doc[1] - point[1]
							m11 = m22 = (h + dy) / h
							dx = -(bbox[0] * m11 - bbox[0])
							dy = -(bbox[1] * m22 - bbox[1])
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
		if mark == 3:
			dx = start_point[0] - end_point[0]
			if shift:
				m11 = (w + 2.0 * dx) / w
				dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
				#---- snapping
				point = middle_points[0]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dx = point[0] - p_doc[0]
				m11 = (w + 2.0 * dx) / w
				dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
				#---- snapping
			else:
				m11 = (w + dx) / w
				dx = -(bbox[2] * m11 - bbox[2])
				#---- snapping
				point = middle_points[0]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dx = point[0] - p_doc[0]
				m11 = (w + dx) / w
				dx = -(bbox[2] * m11 - bbox[2])
				#---- snapping
		if mark == 5:
			dx = end_point[0] - start_point[0]
			if shift:
				m11 = (w + 2.0 * dx) / w
				dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
				#---- snapping
				point = middle_points[2]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dx = p_doc[0] - point[0]
				m11 = (w + 2.0 * dx) / w
				dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
				#---- snapping
			else:
				m11 = (w + dx) / w
				dx = -(bbox[0] * m11 - bbox[0])
				#---- snapping
				point = middle_points[2]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dx = p_doc[0] - point[0]
				m11 = (w + dx) / w
				dx = -(bbox[0] * m11 - bbox[0])
				#---- snapping
		if mark == 6:
			dx = start_point[0] - end_point[0]
			dy = start_point[1] - end_point[1]
			if shift:
				if control:
					m11 = (w + 2.0 * dx) / w
					m22 = (h + 2.0 * dy) / h
					dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
					dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = (w + 2.0 * dx) / w
						dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					point = middle_points[3]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = point[1] - p_doc[1]
						m22 = (h + 2.0 * dy) / h
						dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + 2.0 * dx) / w
					else:
						m11 = m22 = (h + 2.0 * dy) / h
					dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
					dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = m22 = (w + 2.0 * dx) / w
						dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
						dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[3]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = point[1] - p_doc[1]
							m11 = m22 = (h + 2.0 * dy) / h
							dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
							dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
			else:
				if control:
					m11 = (w + dx) / w
					m22 = (h + dy) / h
					dx = -(bbox[2] * m11 - bbox[2])
					dy = -(bbox[3] * m22 - bbox[3])
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = (w + dx) / w
						dx = -(bbox[2] * m11 - bbox[2])
						snap[0] = self.snap.active_snap[0]
					point = middle_points[3]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = point[1] - p_doc[1]
						m22 = (h + dy) / h
						dy = -(bbox[3] * m22 - bbox[3])
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + dx) / w
					else:
						m11 = m22 = (h + dy) / h
					dx = -(bbox[2] * m11 - bbox[2])
					dy = -(bbox[3] * m22 - bbox[3])
					#---- snapping
					point = middle_points[0]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = point[0] - p_doc[0]
						m11 = m22 = (w + dx) / w
						dx = -(bbox[2] * m11 - bbox[2])
						dy = -(bbox[3] * m22 - bbox[3])
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[3]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = point[1] - p_doc[1]
							m11 = m22 = (h + dy) / h
							dx = -(bbox[2] * m11 - bbox[2])
							dy = -(bbox[3] * m22 - bbox[3])
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
		if mark == 7:
			dy = start_point[1] - end_point[1]
			if shift:
				m22 = (h + 2.0 * dy) / h
				dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
				#---- snapping
				point = middle_points[3]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dy = point[1] - p_doc[1]
				m22 = (h + 2.0 * dy) / h
				dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
				#---- snapping
			else:
				m22 = (h + dy) / h
				dy = -(bbox[3] * m22 - bbox[3])
				#---- snapping
				point = middle_points[3]
				trafo = [m11, m21, m12, m22, dx, dy]
				p = libgeom.apply_trafo_to_point(point, trafo)
				f, p, p_doc = self.snap.snap_point(p, False)
				dy = point[1] - p_doc[1]
				m22 = (h + dy) / h
				dy = -(bbox[3] * m22 - bbox[3])
				#---- snapping
		if mark == 8:
			dx = end_point[0] - start_point[0]
			dy = start_point[1] - end_point[1]
			if shift:
				if control:
					m11 = (w + 2.0 * dx) / w
					m22 = (h + 2.0 * dy) / h
					dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
					dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = (w + 2.0 * dx) / w
						dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					point = middle_points[3]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = point[1] - p_doc[1]
						m22 = (h + 2.0 * dy) / h
						dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + 2.0 * dx) / w
					else:
						m11 = m22 = (h + 2.0 * dy) / h
					dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
					dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = m22 = (w + 2.0 * dx) / w
						dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
						dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[3]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = point[1] - p_doc[1]
							m11 = m22 = (h + 2.0 * dy) / h
							dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
							dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
			else:
				if control:
					m11 = (w + dx) / w
					m22 = (h + dy) / h
					dx = -(bbox[0] * m11 - bbox[0])
					dy = -(bbox[3] * m22 - bbox[3])
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = (w + dx) / w
						dx = -(bbox[0] * m11 - bbox[0])
						snap[0] = self.snap.active_snap[0]
					point = middle_points[3]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
					if f:
						dy = point[1] - p_doc[1]
						m22 = (h + dy) / h
						dy = -(bbox[3] * m22 - bbox[3])
						snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping
				else:
					if abs(dx) < abs(dy):
						m11 = m22 = (w + dx) / w
					else:
						m11 = m22 = (h + dy) / h
					dx = -(bbox[0] * m11 - bbox[0])
					dy = -(bbox[3] * m22 - bbox[3])
					#---- snapping
					point = middle_points[2]
					trafo = [m11, m21, m12, m22, dx, dy]
					p = libgeom.apply_trafo_to_point(point, trafo)
					f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
					if f:
						dx = p_doc[0] - point[0]
						m11 = m22 = (w + dx) / w
						dx = -(bbox[0] * m11 - bbox[0])
						dy = -(bbox[3] * m22 - bbox[3])
						snap[0] = self.snap.active_snap[0]
					else:
						point = middle_points[3]
						trafo = [m11, m21, m12, m22, dx, dy]
						p = libgeom.apply_trafo_to_point(point, trafo)
						f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
						if f:
							dy = point[1] - p_doc[1]
							m11 = m22 = (h + dy) / h
							dx = -(bbox[0] * m11 - bbox[0])
							dy = -(bbox[3] * m22 - bbox[3])
							snap[1] = self.snap.active_snap[1]
					self.snap.active_snap = snap
					#---- snapping

		if mark == 11:
			change_x = end_point[0] - start_point[0]
			m12 = change_x / h
			dx = -bbox[1] * m12
		if mark == 16:
			change_x = start_point[0] - end_point[0]
			m12 = change_x / h
			dx = -bbox[3] * m12
		if mark == 13:
			change_y = start_point[1] - end_point[1]
			m21 = change_y / w
			dy = -bbox[2] * m21
		if mark == 14:
			change_y = end_point[1] - start_point[1]
			m21 = change_y / w
			dy = -bbox[0] * m21

		if mark in (10, 12, 15, 17):
			x0, y0 = bbox[:2]
			shift_x, shift_y = self.selection.center_offset
			center_x = x0 + w / 2.0 + shift_x
			center_y = y0 + h / 2.0 + shift_y
			a1 = math.atan2(start_point[1] - center_y, start_point[0] - center_x)
			a2 = math.atan2(end_point[1] - center_y, end_point[0] - center_x)
			angle = a2 - a1
			if control:
				step = config.rotation_step * math.pi / 180.0
				angle = round(angle / step) * step
			m21 = math.sin(angle)
			m11 = m22 = math.cos(angle)
			m12 = -m21
			dx = center_x - m11 * center_x + m21 * center_y;
			dy = center_y - m21 * center_x - m11 * center_y;

		if not m11: m11 = .0000000001
		if not m22: m22 = .0000000001
		return [m11, m21, m12, m22, dx, dy]
Example #35
0
	def point4wmf(self, point):
		return rndpoint(apply_trafo_to_point(point, self.trafo))
 def get_point(self):
     return libgeom.apply_trafo_to_point(self.point, self.target.trafo)
Example #37
0
	def apply_trafo_before(self, trafo):
		if not len(self.point) == 2:
			p0, p1, p2, marker = deepcopy(self.point)
			p0 = libgeom.apply_trafo_to_point(p0, trafo)
			self.point = [p0, p1, p2, marker]
Example #38
0
	def get_point(self):
		p = libgeom.midpoint(self.start, self.stop, self.coef)
		return libgeom.apply_trafo_to_point(p, self.target.trafo)
Example #39
0
 def is_point_in_layout_bbox(self, point):
     bbox = self.target.cache_layout_bbox
     doc_point = self.canvas.win_to_doc(point)
     inv_trafo = libgeom.invert_trafo(self.target.trafo)
     doc_point = libgeom.apply_trafo_to_point(doc_point, inv_trafo)
     return libgeom.is_point_in_bbox(doc_point, bbox)
 def point4wmf(self, point):
     return rndpoint(apply_trafo_to_point(point, self.trafo))
Example #41
0
	def get_point(self):
		angle = self.get_angle()
		x = 0.5 * math.cos(angle) + 0.5
		y = 0.5 * math.sin(angle) + 0.5
		return libgeom.apply_trafo_to_point([x, y], self.target.trafo)
Example #42
0
 def get_point(self):
     p = libgeom.midpoint(self.start, self.stop, self.coef)
     return libgeom.apply_trafo_to_point(p, self.target.trafo)
Example #43
0
 def get_point(self):
     angle = self.get_angle()
     x = 0.5 * math.cos(angle) + 0.5
     y = 0.5 * math.sin(angle) + 0.5
     return libgeom.apply_trafo_to_point([x, y], self.target.trafo)
Example #44
0
    def _calc_trafo(self, event):
        control = event.is_ctrl()
        shift = event.is_shift()
        mark = self.canvas.resize_marker
        start_point = self.canvas.win_to_doc(self.start)
        end_point = self.canvas.win_to_doc(self.end)
        bbox = self.presenter.selection.bbox
        middle_points = libgeom.bbox_middle_points(bbox)
        w = bbox[2] - bbox[0]
        h = bbox[3] - bbox[1]
        m11 = m22 = 1.0
        m12 = m21 = 0.0
        dx = dy = 0.0
        snap = [None, None]
        if mark == 0:
            dx = start_point[0] - end_point[0]
            dy = end_point[1] - start_point[1]
            if shift:
                if control:
                    m11 = (w + 2.0 * dx) / w
                    m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                    dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = (w + 2.0 * dx) / w
                        dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[1]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = p_doc[1] - point[1]
                        m22 = (h + 2.0 * dy) / h
                        dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + 2.0 * dx) / w
                    else:
                        m11 = m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                    dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = m22 = (w + 2.0 * dx) / w
                        dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                        dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[1]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = p_doc[1] - point[1]
                            m11 = m22 = (h + 2.0 * dy) / h
                            dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 -
                                                                   1.0) / 2.0
                            dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 -
                                                                   1.0) / 2.0
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
            else:
                if control:
                    m11 = (w + dx) / w
                    m22 = (h + dy) / h
                    dx = -(bbox[2] * m11 - bbox[2])
                    dy = -(bbox[1] * m22 - bbox[1])
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = (w + dx) / w
                        dx = -(bbox[2] * m11 - bbox[2])
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[1]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = p_doc[1] - point[1]
                        m22 = (h + dy) / h
                        dy = -(bbox[1] * m22 - bbox[1])
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + dx) / w
                    else:
                        m11 = m22 = (h + dy) / h
                    dx = -(bbox[2] * m11 - bbox[2])
                    dy = -(bbox[1] * m22 - bbox[1])
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = m22 = (w + dx) / w
                        dx = -(bbox[2] * m11 - bbox[2])
                        dy = -(bbox[1] * m22 - bbox[1])
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[1]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = p_doc[1] - point[1]
                            m11 = m22 = (h + dy) / h
                            dx = -(bbox[2] * m11 - bbox[2])
                            dy = -(bbox[1] * m22 - bbox[1])
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
        if mark == 1:
            dy = end_point[1] - start_point[1]
            if shift:
                m22 = (h + 2.0 * dy) / h
                dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                # ---- snapping
                point = middle_points[1]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dy = p_doc[1] - point[1]
                m22 = (h + 2.0 * dy) / h
                dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
            # ---- snapping
            else:
                m22 = (h + dy) / h
                dy = -(bbox[1] * m22 - bbox[1])
                # ---- snapping
                point = middle_points[1]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dy = p_doc[1] - point[1]
                m22 = (h + dy) / h
                dy = -(bbox[1] * m22 - bbox[1])
                # ---- snapping
        if mark == 2:
            dx = end_point[0] - start_point[0]
            dy = end_point[1] - start_point[1]
            if shift:
                if control:
                    m11 = (w + 2.0 * dx) / w
                    m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                    dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = (w + 2.0 * dx) / w
                        dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[1]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = p_doc[1] - point[1]
                        m22 = (h + 2.0 * dy) / h
                        dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + 2.0 * dx) / w
                    else:
                        m11 = m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                    dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = m22 = (w + 2.0 * dx) / w
                        dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                        dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[1]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = p_doc[1] - point[1]
                            m11 = m22 = (h + 2.0 * dy) / h
                            dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 -
                                                                   1.0) / 2.0
                            dy = -(bbox[1] * m22 - bbox[1]) - h * (m22 -
                                                                   1.0) / 2.0
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
            else:
                if control:
                    m11 = (w + dx) / w
                    m22 = (h + dy) / h
                    dx = -(bbox[0] * m11 - bbox[0])
                    dy = -(bbox[1] * m22 - bbox[1])
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = (w + dx) / w
                        dx = -(bbox[0] * m11 - bbox[0])
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[1]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = p_doc[1] - point[1]
                        m22 = (h + dy) / h
                        dy = -(bbox[1] * m22 - bbox[1])
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + dx) / w
                    else:
                        m11 = m22 = (h + dy) / h
                    dx = -(bbox[0] * m11 - bbox[0])
                    dy = -(bbox[1] * m22 - bbox[1])
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = m22 = (w + dx) / w
                        dx = -(bbox[0] * m11 - bbox[0])
                        dy = -(bbox[1] * m22 - bbox[1])
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[1]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = p_doc[1] - point[1]
                            m11 = m22 = (h + dy) / h
                            dx = -(bbox[0] * m11 - bbox[0])
                            dy = -(bbox[1] * m22 - bbox[1])
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
        if mark == 3:
            dx = start_point[0] - end_point[0]
            if shift:
                m11 = (w + 2.0 * dx) / w
                dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                # ---- snapping
                point = middle_points[0]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dx = point[0] - p_doc[0]
                m11 = (w + 2.0 * dx) / w
                dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
            # ---- snapping
            else:
                m11 = (w + dx) / w
                dx = -(bbox[2] * m11 - bbox[2])
                # ---- snapping
                point = middle_points[0]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dx = point[0] - p_doc[0]
                m11 = (w + dx) / w
                dx = -(bbox[2] * m11 - bbox[2])
                # ---- snapping
        if mark == 5:
            dx = end_point[0] - start_point[0]
            if shift:
                m11 = (w + 2.0 * dx) / w
                dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                # ---- snapping
                point = middle_points[2]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dx = p_doc[0] - point[0]
                m11 = (w + 2.0 * dx) / w
                dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
            # ---- snapping
            else:
                m11 = (w + dx) / w
                dx = -(bbox[0] * m11 - bbox[0])
                # ---- snapping
                point = middle_points[2]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dx = p_doc[0] - point[0]
                m11 = (w + dx) / w
                dx = -(bbox[0] * m11 - bbox[0])
                # ---- snapping
        if mark == 6:
            dx = start_point[0] - end_point[0]
            dy = start_point[1] - end_point[1]
            if shift:
                if control:
                    m11 = (w + 2.0 * dx) / w
                    m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                    dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = (w + 2.0 * dx) / w
                        dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[3]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = point[1] - p_doc[1]
                        m22 = (h + 2.0 * dy) / h
                        dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + 2.0 * dx) / w
                    else:
                        m11 = m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                    dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = m22 = (w + 2.0 * dx) / w
                        dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 - 1.0) / 2.0
                        dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[3]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = point[1] - p_doc[1]
                            m11 = m22 = (h + 2.0 * dy) / h
                            dx = -(bbox[2] * m11 - bbox[2]) + w * (m11 -
                                                                   1.0) / 2.0
                            dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 -
                                                                   1.0) / 2.0
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
            else:
                if control:
                    m11 = (w + dx) / w
                    m22 = (h + dy) / h
                    dx = -(bbox[2] * m11 - bbox[2])
                    dy = -(bbox[3] * m22 - bbox[3])
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = (w + dx) / w
                        dx = -(bbox[2] * m11 - bbox[2])
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[3]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = point[1] - p_doc[1]
                        m22 = (h + dy) / h
                        dy = -(bbox[3] * m22 - bbox[3])
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + dx) / w
                    else:
                        m11 = m22 = (h + dy) / h
                    dx = -(bbox[2] * m11 - bbox[2])
                    dy = -(bbox[3] * m22 - bbox[3])
                    # ---- snapping
                    point = middle_points[0]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = point[0] - p_doc[0]
                        m11 = m22 = (w + dx) / w
                        dx = -(bbox[2] * m11 - bbox[2])
                        dy = -(bbox[3] * m22 - bbox[3])
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[3]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = point[1] - p_doc[1]
                            m11 = m22 = (h + dy) / h
                            dx = -(bbox[2] * m11 - bbox[2])
                            dy = -(bbox[3] * m22 - bbox[3])
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
        if mark == 7:
            dy = start_point[1] - end_point[1]
            if shift:
                m22 = (h + 2.0 * dy) / h
                dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                # ---- snapping
                point = middle_points[3]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dy = point[1] - p_doc[1]
                m22 = (h + 2.0 * dy) / h
                dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
            # ---- snapping
            else:
                m22 = (h + dy) / h
                dy = -(bbox[3] * m22 - bbox[3])
                # ---- snapping
                point = middle_points[3]
                trafo = [m11, m21, m12, m22, dx, dy]
                p = libgeom.apply_trafo_to_point(point, trafo)
                f, p, p_doc = self.snap.snap_point(p, False)
                dy = point[1] - p_doc[1]
                m22 = (h + dy) / h
                dy = -(bbox[3] * m22 - bbox[3])
                # ---- snapping
        if mark == 8:
            dx = end_point[0] - start_point[0]
            dy = start_point[1] - end_point[1]
            if shift:
                if control:
                    m11 = (w + 2.0 * dx) / w
                    m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                    dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = (w + 2.0 * dx) / w
                        dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[3]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = point[1] - p_doc[1]
                        m22 = (h + 2.0 * dy) / h
                        dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + 2.0 * dx) / w
                    else:
                        m11 = m22 = (h + 2.0 * dy) / h
                    dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                    dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = m22 = (w + 2.0 * dx) / w
                        dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 - 1.0) / 2.0
                        dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 - 1.0) / 2.0
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[3]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = point[1] - p_doc[1]
                            m11 = m22 = (h + 2.0 * dy) / h
                            dx = -(bbox[0] * m11 - bbox[0]) - w * (m11 -
                                                                   1.0) / 2.0
                            dy = -(bbox[3] * m22 - bbox[3]) + h * (m22 -
                                                                   1.0) / 2.0
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping
            else:
                if control:
                    m11 = (w + dx) / w
                    m22 = (h + dy) / h
                    dx = -(bbox[0] * m11 - bbox[0])
                    dy = -(bbox[3] * m22 - bbox[3])
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = (w + dx) / w
                        dx = -(bbox[0] * m11 - bbox[0])
                        snap[0] = self.snap.active_snap[0]
                    point = middle_points[3]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_x=False)
                    if f:
                        dy = point[1] - p_doc[1]
                        m22 = (h + dy) / h
                        dy = -(bbox[3] * m22 - bbox[3])
                        snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                # ---- snapping
                else:
                    if abs(dx) < abs(dy):
                        m11 = m22 = (w + dx) / w
                    else:
                        m11 = m22 = (h + dy) / h
                    dx = -(bbox[0] * m11 - bbox[0])
                    dy = -(bbox[3] * m22 - bbox[3])
                    # ---- snapping
                    point = middle_points[2]
                    trafo = [m11, m21, m12, m22, dx, dy]
                    p = libgeom.apply_trafo_to_point(point, trafo)
                    f, p, p_doc = self.snap.snap_point(p, False, snap_y=False)
                    if f:
                        dx = p_doc[0] - point[0]
                        m11 = m22 = (w + dx) / w
                        dx = -(bbox[0] * m11 - bbox[0])
                        dy = -(bbox[3] * m22 - bbox[3])
                        snap[0] = self.snap.active_snap[0]
                    else:
                        point = middle_points[3]
                        trafo = [m11, m21, m12, m22, dx, dy]
                        p = libgeom.apply_trafo_to_point(point, trafo)
                        f, p, p_doc = self.snap.snap_point(p,
                                                           False,
                                                           snap_x=False)
                        if f:
                            dy = point[1] - p_doc[1]
                            m11 = m22 = (h + dy) / h
                            dx = -(bbox[0] * m11 - bbox[0])
                            dy = -(bbox[3] * m22 - bbox[3])
                            snap[1] = self.snap.active_snap[1]
                    self.snap.active_snap = snap
                    # ---- snapping

        if mark == 11:
            change_x = end_point[0] - start_point[0]
            m12 = change_x / h
            dx = -bbox[1] * m12
        if mark == 16:
            change_x = start_point[0] - end_point[0]
            m12 = change_x / h
            dx = -bbox[3] * m12
        if mark == 13:
            change_y = start_point[1] - end_point[1]
            m21 = change_y / w
            dy = -bbox[2] * m21
        if mark == 14:
            change_y = end_point[1] - start_point[1]
            m21 = change_y / w
            dy = -bbox[0] * m21

        if mark in (10, 12, 15, 17):
            x0, y0 = bbox[:2]
            shift_x, shift_y = self.selection.center_offset
            center_x = x0 + w / 2.0 + shift_x
            center_y = y0 + h / 2.0 + shift_y
            a1 = math.atan2(start_point[1] - center_y,
                            start_point[0] - center_x)
            a2 = math.atan2(end_point[1] - center_y, end_point[0] - center_x)
            angle = a2 - a1
            if control:
                step = config.rotation_step * math.pi / 180.0
                angle = round(angle / step) * step
            m21 = math.sin(angle)
            m11 = m22 = math.cos(angle)
            m12 = -m21
            dx = center_x - m11 * center_x + m21 * center_y
            dy = center_y - m21 * center_x - m11 * center_y

        m11 = m11 or .000001
        m22 = m22 or .000001
        return [m11, m21, m12, m22, dx, dy]