def __init__(self):
"""Constructor."""
# setup user interface
self.widget = QtGui.QWidget()
self.ui = Ui_HyDesign()
self.ui.setupUi(self.widget)
# module HyDesign
self.XSData = {
"Type": 0,
"Slope": 1.0,
"Roughness": 24.0,
"Discharge": "",
"RectWidth": 10.0,
"RectHeight": 1.0,
"TrapWidth": 10.0,
"TrapHeight": 1.0,
"TrapLeftSl": 1.0,
"TrapRightSl": 1.0,
"TriaHeight": 1.0,
"TriaLeftSl": 1.0,
"TriaRightSl": 1.0,
"CircWidth": 5.0,
"CircRadius": 10.0,
"ParaWidth": 10.0,
"ParaHeight": 2.0
}
self.ui.comboBoxTypeXSection.clear()
self.ui.comboBoxTypeXSection.addItem("Rectangle")
self.ui.comboBoxTypeXSection.addItem("Trapezoid")
self.ui.comboBoxTypeXSection.addItem("Triangle")
self.ui.comboBoxTypeXSection.addItem("Circle")
self.ui.comboBoxTypeXSection.addItem("Parabola")
self.ui.comboBoxTypeXSection.setCurrentIndex(self.XSData["Type"])
self.setType()
# connections combo box
self.ui.comboBoxTypeXSection.activated.connect(self.setType)
# connections double spin box maximum discharge
self.ui.doubleSpinBoxStrickler.valueChanged.connect(self.calcDischarge)
self.ui.doubleSpinBoxSlope.valueChanged.connect(self.calcDischarge)
# connections double spin box rectangle
self.ui.doubleSpinBoxRectWidth.valueChanged.connect(self.calcRect)
self.ui.doubleSpinBoxRectHeight.valueChanged.connect(self.calcRect)
# connections double spin box trapezoid
self.ui.doubleSpinBoxTrapWidth.valueChanged.connect(self.calcTrap)
self.ui.doubleSpinBoxTrapHeight.valueChanged.connect(self.calcTrap)
self.ui.doubleSpinBoxTrapLeftSl.valueChanged.connect(self.calcTrap)
self.ui.doubleSpinBoxTrapRightSl.valueChanged.connect(self.calcTrap)
# connections double spin box triangle
self.ui.doubleSpinBoxTriaHeight.valueChanged.connect(self.calcTria)
self.ui.doubleSpinBoxTriaLeftSl.valueChanged.connect(self.calcTria)
self.ui.doubleSpinBoxTriaRightSl.valueChanged.connect(self.calcTria)
# connections double spin box circle
self.ui.doubleSpinBoxCircWidth.valueChanged.connect(self.calcCirc)
self.ui.doubleSpinBoxCircRadius.valueChanged.connect(self.calcCirc)
# connections double spin box barabola
self.ui.doubleSpinBoxParaWidth.valueChanged.connect(self.calcPara)
self.ui.doubleSpinBoxParaHeight.valueChanged.connect(self.calcPara)
self.calcDischarge()
class WrapHyDesign():
"""Wrapper for legend in result subwindow"""
def __init__(self):
"""Constructor."""
# setup user interface
self.widget = QtGui.QWidget()
self.ui = Ui_HyDesign()
self.ui.setupUi(self.widget)
# module HyDesign
self.XSData = {
"Type": 0,
"Slope": 1.0,
"Roughness": 24.0,
"Discharge": "",
"RectWidth": 10.0,
"RectHeight": 1.0,
"TrapWidth": 10.0,
"TrapHeight": 1.0,
"TrapLeftSl": 1.0,
"TrapRightSl": 1.0,
"TriaHeight": 1.0,
"TriaLeftSl": 1.0,
"TriaRightSl": 1.0,
"CircWidth": 5.0,
"CircRadius": 10.0,
"ParaWidth": 10.0,
"ParaHeight": 2.0
}
self.ui.comboBoxTypeXSection.clear()
self.ui.comboBoxTypeXSection.addItem("Rectangle")
self.ui.comboBoxTypeXSection.addItem("Trapezoid")
self.ui.comboBoxTypeXSection.addItem("Triangle")
self.ui.comboBoxTypeXSection.addItem("Circle")
self.ui.comboBoxTypeXSection.addItem("Parabola")
self.ui.comboBoxTypeXSection.setCurrentIndex(self.XSData["Type"])
self.setType()
# connections combo box
self.ui.comboBoxTypeXSection.activated.connect(self.setType)
# connections double spin box maximum discharge
self.ui.doubleSpinBoxStrickler.valueChanged.connect(self.calcDischarge)
self.ui.doubleSpinBoxSlope.valueChanged.connect(self.calcDischarge)
# connections double spin box rectangle
self.ui.doubleSpinBoxRectWidth.valueChanged.connect(self.calcRect)
self.ui.doubleSpinBoxRectHeight.valueChanged.connect(self.calcRect)
# connections double spin box trapezoid
self.ui.doubleSpinBoxTrapWidth.valueChanged.connect(self.calcTrap)
self.ui.doubleSpinBoxTrapHeight.valueChanged.connect(self.calcTrap)
self.ui.doubleSpinBoxTrapLeftSl.valueChanged.connect(self.calcTrap)
self.ui.doubleSpinBoxTrapRightSl.valueChanged.connect(self.calcTrap)
# connections double spin box triangle
self.ui.doubleSpinBoxTriaHeight.valueChanged.connect(self.calcTria)
self.ui.doubleSpinBoxTriaLeftSl.valueChanged.connect(self.calcTria)
self.ui.doubleSpinBoxTriaRightSl.valueChanged.connect(self.calcTria)
# connections double spin box circle
self.ui.doubleSpinBoxCircWidth.valueChanged.connect(self.calcCirc)
self.ui.doubleSpinBoxCircRadius.valueChanged.connect(self.calcCirc)
# connections double spin box barabola
self.ui.doubleSpinBoxParaWidth.valueChanged.connect(self.calcPara)
self.ui.doubleSpinBoxParaHeight.valueChanged.connect(self.calcPara)
self.calcDischarge()
def updateQ(self, Q):
self.ui.labelDischarge.setText("%.3f %s" % (round(Q, 3), " m\xb3/s"))
def calcRect(self):
w = self.ui.doubleSpinBoxRectWidth.value()
h = self.ui.doubleSpinBoxRectHeight.value()
J= self.ui.doubleSpinBoxSlope.value()/100.0
kst = self.ui.doubleSpinBoxStrickler.value()
A = w*h
U = w+2*h
if U>0:
R = A/U
else:
R = 0
Q = kst * math.pow(R, 2.0/3.0) * math.pow(J, 1.0/2.0)*A
self.updateQ(Q)
self.drawXSection()
def calcTrap(self):
w = self.ui.doubleSpinBoxTrapWidth.value()
h = self.ui.doubleSpinBoxTrapHeight.value()
sl = self.ui.doubleSpinBoxTrapLeftSl.value()
sr = self.ui.doubleSpinBoxTrapRightSl.value()
e = h/sl
f = h/sr
A = 0
U = 0
if w - e - f <= 0:
a = w / (1/sl + 1/sr)
m = a/sl
n = a/sr
A = w/2*a
U = math.sqrt(pow(a, 2)+pow(m, 2)) + math.sqrt(pow(a, 2)+pow(n, 2))
else:
c = w-e-f
A = (w+c)/2*h
U = math.sqrt(pow(h, 2)+pow(e, 2)) + math.sqrt(pow(h, 2)+pow(f, 2)) + c
J= self.ui.doubleSpinBoxSlope.value()/100.0
kst = self.ui.doubleSpinBoxStrickler.value()
if U>0:
R = A/U
else:
R = 0
Q = kst * math.pow(R, 2.0/3.0) * math.pow(J, 1.0/2.0)*A
self.updateQ(Q)
self.drawXSection()
def calcTria(self):
h = self.ui.doubleSpinBoxTriaHeight.value()
sl = self.ui.doubleSpinBoxTriaLeftSl.value()
sr = self.ui.doubleSpinBoxTriaRightSl.value()
w = h/sl + h/sr
J= self.ui.doubleSpinBoxSlope.value()/100.0
kst = self.ui.doubleSpinBoxStrickler.value()
e = h/sl
f = h/sr
A = (e+f)/2*h
U = math.sqrt(pow(h, 2)+pow(e, 2)) + math.sqrt(pow(h, 2)+pow(f, 2))
if U>0:
R = A/U
else:
R = 0
Q = kst * math.pow(R, 2.0/3.0) * math.pow(J, 1.0/2.0)*A
self.updateQ(Q)
self.drawXSection()
def calcCirc(self):
w = self.ui.doubleSpinBoxCircWidth.value()
r = self.ui.doubleSpinBoxCircRadius.value()
if w >= 2*r:
r = w/2
self.ui.doubleSpinBoxCircRadius.setValue(r)
a = 0
if r > 0:
a = 2*math.asin(w/2/r)
J= self.ui.doubleSpinBoxSlope.value()/100.0
kst = self.ui.doubleSpinBoxStrickler.value()
A = math.pow(r, 2)/2*(a-math.sin(a))
U = r*a
if U>0:
R = A/U
else:
R = 0
Q = kst * math.pow(R, 2.0/3.0) * math.pow(J, 1.0/2.0)*A
self.updateQ(Q)
self.drawXSection()
def calcPara(self):
w = self.ui.doubleSpinBoxParaWidth.value()
h = self.ui.doubleSpinBoxParaHeight.value()
J= self.ui.doubleSpinBoxSlope.value()/100.0
kst = self.ui.doubleSpinBoxStrickler.value()
A = 0
U = 0
if h > 0:
A = 2.0/3.0*w/math.sqrt(h)*math.pow(h, 3.0/2.0)
U = 2*((8*math.pow(h, 2)*math.sqrt(math.pow(w,2)/math.pow(h,2)+16)+math.pow(w,2)*math.log(8*math.pow(h,2)*(math.sqrt(math.pow(w,2)/math.pow(h,2)+16)+4)+math.pow(w,2)))/(32*h)-math.pow(w,2)*math.log(math.pow(w,2))/(32*h))
else:
A = 0
U = 0
if U>0:
R = A/U
else:
R = 0
Q = kst * math.pow(R, 2.0/3.0) * math.pow(J, 1.0/2.0)*A
self.updateQ(Q)
self.drawXSection()
def calcDischarge(self):
type = self.ui.comboBoxTypeXSection.currentIndex()
self.ui.stackedWidgetType.setCurrentIndex(type)
if type == 0:
self.calcRect()
elif type == 1:
self.calcTrap()
elif type == 2:
self.calcTria()
elif type == 3:
self.calcCirc()
elif type == 4:
self.calcPara()
def updateUi(self):
self.updateUiRect()
self.updateUiTrap()
self.updateUiTria()
self.updateUiCirc()
self.updateUiPara()
self.ui.labelDischarge.setText(self.XSData["Discharge"])
def setType(self):
self.calcDischarge()
self.updateUi()
def checkRectangle(self):
w = self.ui.doubleSpinBoxRectWidth.value()
h = self.ui.doubleSpinBoxRectHeight.value()
if w == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Breite!")
return
elif h == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Hoehe!")
return
else:
self.XSData["Type"] = 0
self.XSData["RectWidth"] = w
self.XSData["RectHeight"] = h
def checkTrapezoid(self):
w = self.ui.doubleSpinBoxTrapWidth.value()
h = self.ui.doubleSpinBoxTrapHeight.value()
sl = self.ui.doubleSpinBoxTrapLeftSl.value()
sr = self.ui.doubleSpinBoxTrapRightSl.value()
if w == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Breite!")
return
elif h == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Hoehe!")
return
else:
self.XSData["Type"] = 1
self.XSData["TrapWidth"] = w
self.XSData["TrapHeight"] = h
self.XSData["TrapLeftSl"] = sl
self.XSData["TrapRightSl"] = sr
def checkTriangle(self):
h = self.ui.doubleSpinBoxTriaHeight.value()
sl = self.ui.doubleSpinBoxTriaLeftSl.value()
sr = self.ui.doubleSpinBoxTriaRightSl.value()
if h == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Hoehe!")
return
else:
self.XSData["Type"] = 2
self.XSData["TriaHeight"] = h
self.XSData["TriaLeftSl"] = sl
self.XSData["TriaRightSl"] = sr
def checkCircle(self):
w = self.ui.doubleSpinBoxCircWidth.value()
r = self.ui.doubleSpinBoxCircRadius.value()
N = self.ui.doubleSpinBoxCircVert.value()
if w == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Breite!")
return
elif r == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltiger Radius!")
return
else:
self.XSData["Type"] = 3
self.XSData["CircWidth"] = w
self.XSData["CircRadius"] = r
self.XSData["CircVert"] = N
def checkParabola(self):
w = self.ui.doubleSpinBoxParaWidth.value()
h = self.ui.doubleSpinBoxParaHeight.value()
N = self.ui.doubleSpinBoxParaVert.value()
if w == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Breite!")
return
elif h == 0.0:
QMessageBox.warning(self, "Eingabefehler", \
"Ungueltige Hoehe!")
return
else:
self.XSData["Type"] = 4
self.XSData["ParaWidth"] = w
self.XSData["ParaHeight"] = h
self.XSData["ParaVert"] = N
def getXSData(self):
return self.XSData, self.xList, self.zList
def updateUiRect(self):
self.ui.doubleSpinBoxRectWidth.setValue(self.XSData["RectWidth"])
self.ui.doubleSpinBoxRectHeight.setValue(self.XSData["RectHeight"])
def updateUiTrap(self):
self.ui.doubleSpinBoxTrapWidth.setValue(self.XSData["TrapWidth"])
self.ui.doubleSpinBoxTrapHeight.setValue(self.XSData["TrapHeight"])
self.ui.doubleSpinBoxTrapLeftSl.setValue(self.XSData["TrapLeftSl"])
self.ui.doubleSpinBoxTrapRightSl.setValue(self.XSData["TrapRightSl"])
def updateUiTria(self):
self.ui.doubleSpinBoxTriaHeight.setValue(self.XSData["TriaHeight"])
self.ui.doubleSpinBoxTriaLeftSl.setValue(self.XSData["TriaLeftSl"])
self.ui.doubleSpinBoxTriaRightSl.setValue(self.XSData["TriaRightSl"])
def updateUiCirc(self):
self.ui.doubleSpinBoxCircWidth.setValue(self.XSData["CircWidth"])
self.ui.doubleSpinBoxCircRadius.setValue(self.XSData["CircRadius"])
def updateUiPara(self):
self.ui.doubleSpinBoxParaWidth.setValue(self.XSData["ParaWidth"])
self.ui.doubleSpinBoxParaHeight.setValue(self.XSData["ParaHeight"])
def drawXSection(self):
pass
