def trigger_pause(self):
if not self.connected:
print "Device not connected"
return False
data = []
pause_trig = PV('pause_trigger_source')
acquisition_mode = PV('acquisition_mode')
poll(evt=1.e-5, iot=0.01)
print "starting setup is, acquisition: " + str(
acquisition_mode.get()) + " stoptrig: " + str(pause_trig.get())
acquisition_mode.put(0)
poll(evt=1.e-5, iot=0.01)
#pause_trig.put(1)
util.put_check(pause_trig, 1)
print "trig1: " + str(pause_trig.get())
poll(evt=1.0, iot=1.01)
print "trig2: " + str(pause_trig.get())
data.append(pause_trig.get() == 1)
time.sleep(3)
print "trig3: " + str(pause_trig.get())
#pause_trig.put(0)
util.put_check(pause_trig, 0)
poll(evt=1.0, iot=1.01)
data.append(pause_trig.get() == 0)
time.sleep(3)
print "trig4: " + str(pause_trig.get())
return data
def burst_size(self):
if not self.connected:
print "Device not connected"
return False
data = []
count = PV('in_counts_3')
trig_mode = PV('trig_mode')
low3 = PV('low_limit_3')
int_time = PV('analog_out_period')
trig_burst = PV('trig_burst')
trig_buffer = PV('trig_buffer')
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
util.put_check(trig_mode, 0)
low3.put(0.0)
int_time.put(10e-4)
util.put_check(trig_buffer, 0)
util.put_check(trig_burst, 1000)
poll(evt=1.e-5, iot=0.01)
def getCount(pvname, value, **kw):
data.append(value)
count.add_callback(getCount)
t0 = time.time()
init.put(1)
t1 = time.time()
# while caget('paused_state') != 1:
# if time.time() - t1 > 30:
# return "pause state never reached"
# else:
# pass
pass1 = len(data)
util.put_check(trig_burst, 10000)
time.sleep(0.1)
t2 = time.time()
init.put(1)
t3 = time.time()
# while caget('paused_state') != 1:
# if time.time() - t3 > 30:
# return "pause state never reached 2nd time"
# else:
# pass
pass2 = len(data) - pass1
# teardown
util.put_check(trig_burst, 0)
return pass1, pass2
def buffering_low(self):
status = PV('status')
if not util.check_device('C1', self.proc) and status.get() in range(0,3):
print "device not connected"
return False
count3 = PV('in_counts_3')
low_3 = PV('low_limit_3')
low_4 = PV('low_limit_4')
trig_buffer = PV('trig_buffer')
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
data3 = []
def getCount3(pvname, value, **kw):
data3.append(value)
if util.put_check(low_3, 0.0) and util.put_check(low_4, 0.0) and util.put_check(trig_buffer, 1000) and util.put_fuzzy('analog_out_period', 10e-5, 0.05):
pass
else:
print "setting not taking place"
return False, False
count3.add_callback(getCount3)
init.put(1)
t0 = time.time()
while time.time() - t0 < 3:
poll(evt=1.e-5, iot=0.01)
time.sleep(2)
return len(data3)
def stopcount_value(self, value):
initial_check = util.expect(self.proc, ["A1"])
data1 = []
def getData1(pvname, value, **kw):
if value != 0:
data1.append(value)
analog1 = PV('analogIn1')
stop_count = PV('outStopCount')
init = PV('initiate')
analog2 = PV('analogIn2')
poll(evt=1.e-5, iot=0.01)
analog1.wait_for_connection()
analog2.wait_for_connection()
init.wait_for_connection()
stop_count.wait_for_connection()
util.put_check(stop_count, value)
analog1.add_callback(getData1)
init.put(1)
poll(evt=1.e-5, iot=0.01)
t0 = time.time()
while time.time() - t0 < 10:
poll(evt=1.e-5, iot=0.01)
run = len(data1)
return run
def trigger_start(self):
if not self.connected:
print "Device not connected"
return False
status = PV('status')
print status.get()
if status.get() not in range(0,3):
print "status"
return False
data = []
start_trig = PV('start_trigger_source')
acquisition_mode = PV('acquisition_mode')
poll(evt=1.e-5, iot=0.01)
print "starting setup is, acquisition: " + str(acquisition_mode.get()) + " stoptrig: " + str(start_trig.get())
acquisition_mode.put(0)
poll(evt=1.e-5, iot=0.01)
#start_trig.put(1)
util.put_check(start_trig, 1)
print "trig1: " + str(start_trig.get())
poll(evt=1.0, iot=1.01)
print "trig2: " + str(start_trig.get())
data.append(start_trig.get() == 1)
time.sleep(3)
print "trig3: " + str(start_trig.get())
#start_trig.put(0)
util.put_check(start_trig, 0)
poll(evt=1.0, iot=1.01)
data.append(start_trig.get() == 0)
time.sleep(3)
print "trig4: " + str(start_trig.get())
return data
def buffering(self, value):
check = util.expect(self.proc, ["C1"])
count3 = PV('in_counts_3')
low3 = PV('low_limit_3')
trig_buffer = PV('trig_buffer', auto_monitor=False)
int_time = PV('analog_out_period')
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
data = []
#camonitor('trig_buffer')
def getCount1(pvname, value, **kw):
data.append(value)
util.put_check(low3, 0.0)
util.put_check(trig_buffer, value)
util.put_fuzzy('analog_out_period', 10e-5, 0.05)
print "set value " + str(value)
print "buffer value " + str(trig_buffer.get())
#time.sleep(5)
#print "buffer value " + str(trig_buffer.get())
count3.add_callback(getCount1)
init.put(1)
poll(evt=1.e-5, iot=0.01)
t0 = time.time()
while time.time() - t0 < 5:
poll(evt=1.e-5, iot=0.01)
run1 = len(data)
return run1
def set_analog_outs(self):
a1 = PV('analog_out_1')
a2 = PV('analog_out_2')
d = []
j = []
#print a1.get(), a2.get()
a2.connect()
#poll(evt=1.0, iot=0.01)
a1.connect()
poll(evt=1.0, iot=0.01)
print a2.info
for i in range(10):
if i % 2 == 1:
util.put_check(a2, 0.45)
#util.put_check(a1, float(i))
else:
util.put_check(a2, 0.5)
#util.put_check(a1, float(i))
#j.append(a1.get())
d.append(a2.get())
print a1.status
#util.put_check(a2, value2)
print d
print j
return d
def test_stopcount():
proc = pexpect.spawn(
"/home/steve/workspace/ig2_medical/ig2-2.6.7 /home/steve/workspace/ig2_medical/m10_stopcount.xml"
)
proc.expect([pexpect.TIMEOUT, pexpect.EOF, 'Announce\(\) success'],
timeout=10)
print proc.after
#util.pv_check('status', 0)
stop = 1001
data1 = []
data2 = []
def getData1(pvname, value, **kw):
if value != 0:
data1.append(value)
def getData2(pvname, value, **kw):
if value != 0:
data2.append(value)
analog1 = PV('analogIn1')
stop_count = PV('outStopCount')
init = PV('initiate')
analog2 = PV('analogIn2')
analog1.wait_for_connection()
analog2.wait_for_connection()
init.wait_for_connection()
stop_count.wait_for_connection()
analog1.add_callback(getData1)
if util.put_check('outStopCount', stop):
init.put(1)
t0 = time.time()
while time.time() - t0 < 30:
poll(evt=1.e-5, iot=0.01)
else:
print "Stopcount not set"
return False
buffered_run = len(data1)
analog2.add_callback(getData2)
time.sleep(2)
if util.put_check('outStopCount', -1):
init.put(1)
t0 = time.time()
while time.time() - t0 < 30:
poll(evt=1.e-5, iot=0.01)
else:
print "Stopcount not set 2nd time"
return False
unbuffered_run = len(data2)
return buffered_run, unbuffered_run
def io(self):
if not self.connected:
print "Device not connected"
return False
d_o = []
a_o = []
d_i = []
a_i = []
d_outs = {
1: PV('digitalOut1'),
2: PV('digitalOut2'),
3: PV('digitalOut3'),
4: PV('digitalOut4'),
5: PV('digitalOut5'),
6: PV('digitalOut6'),
7: PV('digitalOut7'),
8: PV('digitalOut8')
}
d_ins = {
1: PV('digitalIn1'),
2: PV('digitalIn2'),
3: PV('digitalIn3'),
4: PV('digitalIn4'),
5: PV('digitalIn5'),
6: PV('digitalIn6'),
7: PV('digitalIn7'),
8: PV('digitalIn8')
}
a_outs = {
1: PV('analogOut1'),
2: PV('analogOut2'),
3: PV('analogOut3'),
4: PV('analogOut4'),
5: PV('analogOut5'),
6: PV('analogOut6'),
7: PV('analogOut7'),
8: PV('analogOut8')
}
a_ins = {
1: PV('analogIn1'),
2: PV('analogIn2'),
3: PV('analogIn3'),
4: PV('analogIn4'),
5: PV('analogIn5'),
6: PV('analogIn6'),
7: PV('analogIn7'),
8: PV('analogIn8'),
}
poll(evt=1.e-5, iot=0.01)
for i in range(0, 8):
d_o.append(util.put_check(d_outs[i + 1], 1))
a_o.append(util.put_check(a_outs[i + 1], i))
d_i.append(util.pv_check(d_ins[i + 1], 1))
a_i.append(a_ins[i + 1].get() != None)
return [x for sublist in [d_i, a_i, d_o, a_o] for x in sublist]
def buffering(self):
poll(evt=1.9, iot=0.01)
status = PV('status')
poll(evt=1.9, iot=0.01)
start_time = time.time()
while status.get() not in (0, 3):
print str(status.get()) + "not connected yet"
print status.info
print status
connected = status.get() in (0, 3)
poll(evt=1.0, iot=0.51)
if time.time() - start_time >= 60:
connected = False
print "timed out"
break
print util.expect(self.proc, ["C1"])
count3 = PV('in_counts_3')
count4 = PV('in_counts_4')
low_3 = PV('low_limit_3')
low_4 = PV('low_limit_4')
trig_buffer = PV('trig_buffer')
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
data3 = []
data4 = []
def getCount3(pvname, value, **kw):
data3.append(value)
def getCount4(pvname, value, **kw):
data4.append(value)
if util.put_check(
low_3, 0.0) and util.put_check(low_4, 0.0) and util.put_check(
trig_buffer, 1000) and util.put_fuzzy(
'analog_out_period', 10e-5, 0.05):
pass
else:
print "setting not taking place"
return False, False
t0 = time.time()
time.sleep(1)
count3.add_callback(getCount3)
count4.add_callback(getCount4)
poll(evt=1.e-5, iot=0.01)
init.put(1)
poll(evt=1.e-5, iot=0.01)
while time.time() - t0 < 3:
poll(evt=1.e-5, iot=0.01)
# end = self.proc.expect(
# ['Announce\(\) success', pexpect.TIMEOUT, pexpect.EOF], timeout=3)
return len(data3), len(data4)
def set_integration(self, value):
check = util.expect(self.proc, ["C1"])
int_time = PV('analog_out_period', auto_monitor=False)
util.put_check(int_time, value)
print int_time.get()
print int_time.get()
print "before| intended: " + str(value) + " actual: " + str(
int_time.get()) + " close check: " + str(
util.isclose(value, int_time.get(use_monitor=False)))
return int_time.get()
def stopcount(self):
#self.proc = pexpect.spawn("/home/steve/workspace/ig2_medical/ig2-2.6.7 /home/steve/workspace/ig2_medical/m10_stopcount.xml")
if not self.connected:
print "Device not connected"
return False
#util.pv_check('status', 0)
#self.stop = 1001
def getData1(pvname, value, **kw):
if value != 0:
self.data1.append(value)
def getData2(pvname, value, **kw):
if value != 0:
self.data2.append(value)
analog1 = PV('analogIn1')
stop_count = PV('outStopCount')
init = PV('initiate')
analog2 = PV('analogIn2')
poll(evt=1.e-5, iot=0.01)
analog1.wait_for_connection()
analog2.wait_for_connection()
init.wait_for_connection()
stop_count.wait_for_connection()
analog1.add_callback(getData1)
if util.put_check(stop_count, self.stop):
init.put(1)
t0 = time.time()
while time.time() - t0 < 10:
poll(evt=1.e-5, iot=0.01)
else:
print "Stopcount not set"
return False
buffered_run = len(self.data1)
analog2.add_callback(getData2)
if util.put_check(stop_count, -1):
init.put(1)
t0 = time.time()
while time.time() - t0 < 10:
poll(evt=1.e-5, iot=0.01)
else:
print "Stopcount not set 2nd time"
return False
unbuffered_run = len(self.data2)
print unbuffered_run, buffered_run
return buffered_run, unbuffered_run
def buffering(self):
if not self.connected:
print "Device not connected"
return False
count3 = PV('in_counts_3')
count4 = PV('in_counts_4')
low3 = PV('low_limit_3')
low4 = PV('low_limit_4')
trig_buffer = PV('trig_buffer')
int_time = PV('analog_out_period')
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
data1 = []
data2 = []
def getCount1(pvname, value, **kw):
data1.append(value)
def getCount2(pvname, value, **kw):
data2.append(value)
if util.put_check(
low3, 0.0) and util.put_check(low4, 0.0) and util.put_check(
trig_buffer, 1000) and util.put_fuzzy(
'analog_out_period', 10e-5, 0.05):
pass
else:
print "setting not taking place"
return False, False
time.sleep(1)
count3.add_callback(getCount1)
init.put(1)
t0 = time.time()
while time.time() - t0 < 3:
poll(evt=1.e-5, iot=0.01)
run1 = len(data1)
count3.remove_callback(1)
count3.add_callback(getCount2)
if util.put_check(trig_buffer, 500):
pass
else:
print "setting 2nd time not taking place"
return False, False
init.put(1)
t1 = time.time()
while time.time() - t1 < 3:
poll(evt=1.e-5, iot=0.01)
run2 = len(data2)
return run1, run2
def get_state(self):
#print str(util.isclose(1.79999995232, 1.8))
state = PV('r_g0_state')
outp = PV('g0_pressure')
#outp.wait_for_connection()
#print outp.get()
util.put_check(outp, 1.8)
print outp.get()
return state.get()
def stopcount_value(self):
if not self.connected:
print "Device not connected"
return False
#util.pv_check('status', 0)
#self.stop = 1001
data1 = []
data2 = []
def getData1(pvname, value, **kw):
if value != 0:
data1.append(value)
def getData2(pvname, value, **kw):
if value != 0:
data2.append(value)
analog1 = PV('analogIn1')
stop_count = PV('outStopCount')
init = PV('initiate')
analog2 = PV('analogIn2')
poll(evt=1.e-5, iot=0.01)
analog1.wait_for_connection()
analog2.wait_for_connection()
init.wait_for_connection()
stop_count.wait_for_connection()
util.put_check(stop_count, 100)
analog1.add_callback(getData1)
init.put(1)
poll(evt=1.e-5, iot=0.01)
t0 = time.time()
while time.time() - t0 < 10:
poll(evt=1.e-5, iot=0.01)
first_run = len(data1)
analog1.remove_callback(0)
analog1.add_callback(getData2)
time.sleep(2)
util.put_check(stop_count, 200)
init.put(1)
poll(evt=1.e-5, iot=0.01)
t0 = time.time()
while time.time() - t0 < 10:
poll(evt=1.e-5, iot=0.01)
second_run = len(data2)
return first_run, second_run
def run(mode):
util.put_check(accum_mode, mode)
time.sleep(1)
init.put(1)
poll(evt=1.e-5, iot=0.01)
t0 = time.time()
while time.time() - t0 < 5:
poll(evt=1.e-5, iot=0.01)
init.put(0)
poll(evt=1.e-5, iot=0.01)
def close_valve(self):
command = PV('c_v1_command')
state = PV('r_v1_state')
c_open_close = PV('c_v1_open_close')
r_open_close = PV('r_v1_open_close')
if state.get() == 0:
#c_open_close.put(1)
util.put_check(c_open_close, 1)
#c_open_close.put(0)
util.put_check(c_open_close, 0)
poll(evt=1.e-5, iot=0.01)
return state.get()
def integration_set(self):
data = []
if not self.connected:
print "Device not connected"
return False
count = PV('in_counts_3')
trig_mode, low3, low4, trig_buffer, int_time, init = PV(
'trig_mode'), PV('low_limit_3'), PV('low_limit_4'), PV(
'trig_buffer'), PV('analog_out_period'), PV('initiate')
trig_mode.put(1)
low3.put(0.0)
low4.put(0.0)
util.put_check(trig_buffer, 1000)
#util.put_fuzzy('analog_out_period', 10e-5, 0.01)
int_time.put(10e-5)
poll(evt=1.e-5, iot=0.01)
def getCount(pvname, value, **kw):
data.append(value)
count.add_callback(getCount)
init.put(1)
print trig_mode.get(), low3.get(), low4.get(), trig_buffer.get(
), int_time.get()
print count.value
print count.get()
poll(evt=2.0, iot=2.01)
print count.value
print count.get()
fast = count.value
int_time.put(10e-3)
t1 = time.time()
# while caget('analog_out_period') != 10e-3:
# if time.time() - t1 > 20:
# return "integration period is not being set"
# else:
# pass
init.put(1)
time.sleep(5)
slow = count.value
if slow and fast:
print slow, fast
return slow / (fast + 0.01 * fast), slow / (fast - 0.01 * fast)
else:
print slow, fast
return False
def enable_stopcount(self):
if not self.connected:
print "Device not connected"
return False
stop = 100
data1 = []
data2 = []
def getData1(pvname, value, **kw):
if value != 0:
data1.append(value)
def getData2(pvname, value, **kw):
if value != 0:
data2.append(value)
analog1 = PV('analogIn1')
stop_count = PV('outStopCount')
init = PV('initiate')
analog2 = PV('analogIn2')
poll(evt=1.e-5, iot=0.01)
analog1.wait_for_connection()
analog2.wait_for_connection()
init.wait_for_connection()
stop_count.wait_for_connection()
analog1.add_callback(getData1)
if util.put_check(stop_count, stop):
init.put(1)
t0 = time.time()
while time.time() - t0 < 30:
poll(evt=1.e-5, iot=0.01)
else:
print "Stopcount not set"
return False
buffered_run = len(data1)
analog2.add_callback(getData2)
time.sleep(2)
if util.put_check(stop_count, -1):
init.put(1)
t0 = time.time()
while time.time() - t0 < 30:
poll(evt=1.e-5, iot=0.01)
else:
print "Stopcount not set 2nd time"
return False
unbuffered_run = len(data2)
return buffered_run, unbuffered_run
def set_digital_outs(self, value):
if util.expect(self.proc, ["A1"]) != 3:
print "did not connect"
return False
init = PV('initiate')
d_outs = {1: PV('digitalOut1'), 2: PV('digitalOut2'),
3: PV('digitalOut3'), 4: PV('digitalOut4')}
poll(evt=1.0, iot=0.01)
for i in range(4):
util.put_check(d_outs[i + 1], value[i])
return [v.get() for v in d_outs.values()]
def trigger_stop(self):
if not self.connected:
print "Device not connected"
return False
status = PV('status')
print status.get()
if status.get() not in range(0,3):
print "status"
return False
print caget('status')
#time.sleep(5)
data = []
stop_trig = PV('stop_trigger_source')
acquisition_mode = PV('acquisition_mode')
buff_mode = PV('buffered_acquisition')
stopcount = PV('stop_count')
poll(evt=1.e-5, iot=0.01)
# stopcount.put(0)
# poll(evt=1.e-5, iot=0.01)
# buff_mode.put(0)
# poll(evt=1.e-5, iot=0.01)
# print util.put_check(stopcount, 0)
# print stopcount.get()
# print util.put_check(buff_mode, 0)
# print buff_mode.get()
poll(evt=1.e-5, iot=0.01)
print "starting setup is, acquisition: " + str(acquisition_mode.get()) + " stoptrig: " + str(stop_trig.get())
acquisition_mode.put(0)
poll(evt=1.e-5, iot=0.01)
# buff_mode.put(1)
# poll(evt=1.e-5, iot=0.01)
# stopcount.put(1000)
# poll(evt=1.e-5, iot=0.01)
#stop_trig.put(1)
util.put_check(stop_trig, 1)
print "trig1: " + str(stop_trig.get())
poll(evt=1.0, iot=1.01)
print "trig2: " + str(stop_trig.get())
data.append(stop_trig.get() == 1)
time.sleep(3)
print "trig3: " + str(stop_trig.get())
#stop_trig.put(0)
util.put_check(stop_trig, 0)
poll(evt=1.0, iot=1.01)
data.append(stop_trig.get() == 0)
time.sleep(3)
print "trig4: " + str(stop_trig.get())
return data
def burst2(self, value):
#connect = self.proc.expect([pexpect.TIMEOUT, pexpect.EOF, 'Announce\(\) success'], timeout=1)
if not self.connected:
print "Device not connected"
return False
burst = PV('burst_count')
poll(evt=1.01, iot=1.01)
util.put_check(burst, value)
poll(evt=1.0, iot=1.01)
caput('burst_count', value)
# while burst.get() != 100:
# burst.put(100)
# poll(evt=1.0, iot=1.01)
return burst.get()
def buffering(self):
status = PV('status')
if not util.check_device('C1', self.proc) and status.get() in range(0,3):
print "device not connected"
return False
count3 = PV('in_counts_3')
count4 = PV('in_counts_4')
low_3 = PV('low_limit_3')
low_4 = PV('low_limit_4')
trig_buffer = PV('trig_buffer')
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
data3 = []
data4 = []
def getCount3(pvname, value, **kw):
data3.append(value)
def getCount4(pvname, value, **kw):
data4.append(value)
if util.put_check(low_3, 0.0) and util.put_check(low_4, 0.0) and util.put_check(trig_buffer, 1000) and util.put_fuzzy('analog_out_period', 10e-5, 0.05):
pass
else:
print "setting not taking place"
return False, False
t0 = time.time()
# while caget('trig_buffer')!=1000 and caget('trig_mode')!=1:
# if time.time() - t0 > 20:
# return "buffer or mode never set"
# else:
# pass
#util.put_check('initiate', 1)
time.sleep(1)
count3.add_callback(getCount3)
count4.add_callback(getCount4)
init.put(1)
while time.time() - t0 < 3:
poll(evt=1.e-5, iot=0.01)
# time.sleep(2)
end = self.proc.expect(
['Announce\(\) success', pexpect.TIMEOUT, pexpect.EOF], timeout=3)
#print proc.before
return len(data3), len(data4)
def open_valve(self):
if self.connected != True:
return False
command = PV('c_v1_command')
state = PV('r_v1_state')
c_open_close = PV('c_v1_open_close')
r_open_close = PV('r_v1_open_close')
poll(evt=1.e-5, iot=0.01)
if state.get() == 1.0:
util.put_check(c_open_close, 0)
#c_open_close.put(1)
util.put_check(c_open_close, 1)
poll(evt=1.e-5, iot=0.01)
return state.get()
def set_digital_outs(self, values):
initial_check = util.expect(self.proc, ["A1"])
d_outs = {
1: PV('digitalOut1'),
2: PV('digitalOut2'),
3: PV('digitalOut3'),
4: PV('digitalOut4'),
5: PV('digitalOut5'),
6: PV('digitalOut6'),
7: PV('digitalOut7'),
8: PV('digitalOut8')
}
poll(evt=1.e-5, iot=0.01)
for i in range(0, 8):
util.put_check(d_outs[i + 1], values[i])
return [v.get() for v in d_outs.values()]
def turn_on(self):
command = PV('c_p0_command')
state = PV('r_p0_state')
c_on_off = PV('c_p0_on_off')
r_on_off = PV('r_p0_on_off')
c_normal = PV('c_p0_normal')
c_faulted = PV('c_p0_faulted')
c_freq = PV('c_p0_freq')
if state.get() != 0.0:
util.put_check(c_on_off, 0)
util.put_check(c_on_off, 1)
util.put_check(c_normal, 1)
util.put_check(c_faulted, 0)
util.put_check(c_freq, 490)
return state.get()
def data_types(self):
self.proc.expect(["ENABLED", pexpect.TIMEOUT, pexpect.EOF], timeout=10)
test = []
a_o, a_i, d_o, d_i, s_i, s_o, i_i, i_o = {}, {}, {}, {}, {}, {}, {}, {}
for i in range(1, 513):
a_o[i] = PV('analog_out_' + str(i))
a_i[i] = PV('analog_in_' + str(i))
d_i[i] = PV('digital_in_' + str(i))
d_o[i] = PV('digital_out_' + str(i))
s_i[i] = PV('string_in_' + str(i))
s_o[i] = PV('string_out_' + str(i))
i_i[i] = PV('int_in_' + str(i))
i_o[i] = PV('int_out_' + str(i))
for x in range(1, 513):
test.append(util.put_check(a_o[x], x))
for x in range(1, 513):
test.append(util.put_check(d_o[x], 1))
for x in range(1, 513):
test.append(util.put_check(i_o[x], x))
for x in range(1, 513):
test.append(util.put_check(s_o[x], str(x)))
for x in range(1, 513):
test.append(util.pv_check(a_i[x], 0))
for x in range(1, 513):
test.append(util.pv_check(d_i[x], 0))
for x in range(1, 513):
test.append(util.pv_check(i_i[x], 0))
for x in range(1, 513):
test.append(util.pv_check(s_i[x], ''))
if all(x == True for x in test):
return True
else:
return False
def burst_size(self, value):
check = util.expect(self.proc, ["C1"])
data = []
print check
print self.proc.after
count = PV('in_counts_3')
trig_mode = PV('trig_mode')
low3 = PV('low_limit_3')
int_time = PV('analog_out_period')
trig_burst = PV('trig_burst', auto_monitor=False)
trig_buffer = PV('trig_buffer', auto_monitor=False)
init = PV('initiate')
poll(evt=1.e-5, iot=0.01)
util.put_check(trig_mode, 0)
low3.put(0.0)
int_time.put(10e-4)
util.put_check(trig_buffer, value)
util.put_check(trig_burst, value)
print trig_burst.get(), trig_buffer.get(), trig_mode.get(), value
poll(evt=1.e-5, iot=0.01)
def getCount(pvname, value, **kw):
if value != 0:
data.append(value)
print trig_buffer.get(use_monitor=False)
print trig_burst.get(use_monitor=False)
time.sleep(1)
count.add_callback(getCount)
print len(data)
init.put(1)
t0 = time.time()
while time.time() - t0 < 5:
poll(evt=1.e-5, iot=0.01)
data_length = len(data)
# teardown
print len(data)
print len(data)
print len(data)
util.put_check(trig_burst, 0)
util.put_check(trig_buffer, 0)
#print data
return data_length
def io(self):
# on = pexpect.spawn('curl "http://*****:*****@192.168.100.36/outlet?1=CCL"')
# on2 = pexpect.spawn('curl "http://*****:*****@192.168.100.36/outlet?2=CCL"')
#self.proc = pexpect.spawn("/home/steve/workspace/ig2_medical/ig2-2.6.7 /home/steve/workspace/ig2_medical/m10_io.xml")
if not self.connected:
print "Device not connected"
return False
init = PV('initiate')
d_outs = {
1: PV('digitalOut1'),
2: PV('digitalOut2'),
3: PV('digitalOut3'),
4: PV('digitalOut4')
}
d_ins = {
1: PV('digitalIn1'),
2: PV('digitalIn2'),
3: PV('digitalIn3'),
4: PV('digitalIn4')
}
a_ins = {1: PV('analogIn1'), 2: PV('analogIn2')}
a_outs = {1: PV('analogOut1'), 2: PV('analogOut2')}
# dout1, dout2, dout3, dout4 = PV('digitalOut1'), PV('digitalOut2'), PV('digitalOut3'), PV('digitalOut4')
# din1, din2, din3, din4 = PV('digitalIn1'), PV('digitalIn2'), PV('digitalIn3'), PV('digitalIn4')
# aout1, aout2, aout3, aout4 = PV('analogOut1'), PV('analogOut2'), PV('analogOut3'), PV('analogOut4')
# ain1, ain2, ain3, ain4 = PV('analogIn1'), PV('analogIn2'), PV('analogIn3'), PV('analogIn4')
poll(evt=1.e-5, iot=0.01)
d_i = []
a_i = []
d_o = []
a_o = []
init.put(1)
poll(evt=1.e-5, iot=0.01)
for i in range(0, 4):
d_o.append(util.put_check(d_outs[i + 1], 1))
d_i.append(util.pv_check(d_ins[i + 1], 1))
for i in range(0, 2):
a_o.append(util.put_check(a_outs[i + 1], i))
a_i.append(a_ins[i + 1].get() != None)
print d_o
return [x for sublist in [d_i, a_i, d_o, a_o] for x in sublist]
def turn_off(self):
command = PV('c_p0_command')
state = PV('r_p0_state')
c_on_off = PV('c_p0_on_off')
r_on_off = PV('r_p0_on_off')
c_normal = PV('c_p0_normal')
c_faulted = PV('c_p0_faulted')
c_freq = PV('c_p0_freq')
util.put_check(c_normal, 0)
util.put_check(c_faulted, 0)
util.put_check(c_freq, 1)
print state.get()
if state.get() in (0.0, 3.0, 5.0):
util.put_check(c_on_off, 1)
util.put_check(c_on_off, 0)
return state.get()
