def verify_psuutil_data(dut, *argv, **kwargs):
"""
API to get psuutil data based on type of the command
Author: Prudvi Mangadu ([email protected])
:param dut:
:param argv:
:param kwargs:
:return:
"""
result = True
for each_mode in argv:
output = get_psuutil_data(dut, each_mode)
if "numpsus" in each_mode and int(output['numpsus']) != len(
kwargs['psu_list']):
st.error("Incorrect Number of PSUs detected.")
result = False
if "status" in each_mode:
psu_li = cutils.dicts_list_values(output, "psu")
for psu in kwargs['psu_list']:
if psu not in psu_li:
st.error("PSU - {} is not present in DUT.")
result = False
status_li = cutils.dicts_list_values(output, "status")
for status in status_li:
if status not in ['NOT OK', 'OK']:
st.error("Invalid PSU status in DUT.")
result = False
if "OK" not in status_li:
st.error("None of the PSU status is - OK")
result = False
return result
def get_ndp_count(dut, cli_type="", **kwargs):
"""
To get ndp count
Author: Prudvi Mangadu ([email protected])
:param dut:
:return:
"""
cli_type = st.get_ui_type(dut, cli_type=cli_type)
if cli_type == 'click':
command = "show ndp | grep 'Total number of entries'"
output = st.show(dut, command)
out = dicts_list_values(output, 'count')
elif cli_type == 'klish':
command = "show ipv6 neighbors summary"
if 'vrf' in kwargs:
command = "show ipv6 neighbors vrf {} summary".format(
kwargs["vrf"])
output = st.show(dut, command, type='klish')
out = dicts_list_values(output, 'count')
elif cli_type in ['rest-patch', 'rest-put']:
if kwargs.get('vrf'):
out = show_ndp(dut, vrf=kwargs['vrf'], cli_type=cli_type)
else:
out = show_ndp(dut, cli_type=cli_type)
return len(out)
else:
st.error("Unsupported CLI_TYPE: {}".format(cli_type))
return False
return int(out[0]) if out else 0
def verify_hardware_map_status(dut, queues, itter_count=30, delay=1):
"""
To verify the Queue init in hardware
:param dut:
:param queues:
:param itter_count:
:param delay:
:return:
"""
command = redis.build(dut, redis.COUNTERS_DB, "keys *MAP*")
queues_li = utils.make_list(queues)
i = 1
while True:
output = st.show(dut, command)
output_list = utils.filter_and_select(output, ["name"], None)
output_list = utils.dicts_list_values(output_list, "name")
result = True
for each_q in queues_li:
if each_q not in output_list:
st.log("{} not yet init.".format(each_q))
result = False
if result:
return True
if i > itter_count:
st.log("Max {} tries Exceeded.Exiting..".format(i))
return False
i += 1
st.wait(delay)
def bcmcmd_l3_entry_only_config(dut, **kwargs):
if "action" not in kwargs:
st.error("Mandatory params num, action are not provided")
return False
valid = 1
if kwargs["action"] == "delete":
valid = 0
output = bcmcmd_get_l3_entry(dut)
name_list = utils.dicts_list_values(output, "names")
if "L3_ENTRY_ONLY" in name_list:
num = int(
utils.filter_and_select(
output, [], {"names": "L3_ENTRY_ONLY"})[0]['entries']) - 1
command = "bcmcmd 'mod L3_ENTRY_ONLY 1 {} VALID={}'".format(num, valid)
elif "L3_ENTRY_ONLY_SINGLE" in name_list:
num = int(
utils.filter_and_select(
output, [],
{"names": "L3_ENTRY_ONLY_SINGLE"})[0]['entries']) - 1
command = "bcmcmd 'mod L3_ENTRY_ONLY_SINGLE 1 {} BASE_VALID={}'".format(
num, valid)
elif "L3_ENTRY_SINGLE" in name_list:
num = int(
utils.filter_and_select(
output, [], {"names": "L3_ENTRY_SINGLE"})[0]['entries']) - 1
command = "bcmcmd 'mod L3_ENTRY_SINGLE 1 {} BASE_VALID={}'".format(
num, valid)
else:
st.error(
"L3_ENTRY_ONLY | L3_ENTRY_ONLY_SINGLE | L3_ENTRY_SINGLE not found in - listmem l3_entry"
)
return False
st.config(dut, command)
return True
def get_ndp_count(dut):
"""
To get ndp count
Author: Prudvi Mangadu ([email protected])
:param dut:
:return:
"""
command = "show ndp | grep 'Total number of entries'"
output = st.show(dut, command)
out = dicts_list_values(output, 'count')
return int(out[0]) if out else 0
def get(dut, *argv, **kwargs):
"""
verify commands summary
Author: prudviraj k ([email protected])
:param dut:
:param argv:
:param :get_value:
:return:
"""
if not (kwargs.get('get_value') and kwargs.get('match')):
st.error("Mandatory arguments 'get_value', 'match' is not given")
output = show(dut, *argv, **kwargs)
if not output:
return None
entries = filter_and_select(output, None, kwargs['match'])
out = dicts_list_values(entries, kwargs['get_value'])
return integer_parse(out[0])
def get_arp_count(dut, ipaddress=None, interface=None, cli_type="", **kwargs):
"""
To get arp count
Author: Prudvi Mangadu ([email protected])
:param dut:
:param ipaddress:
:param interface:
:return:
"""
cli_type = st.get_ui_type(dut, cli_type=cli_type)
if cli_type == "click":
command = "show arp"
if ipaddress:
command += " {}".format(ipaddress)
if interface:
command += " -if {}".format(interface)
command += " | grep 'Total number of entries'"
elif cli_type == "klish":
command = "show ip arp"
if interface:
intf = get_interface_number_from_name(interface)
command += " interface {} {}".format(intf["type"], intf["number"])
if 'vrf' in kwargs:
command += " vrf {}".format(kwargs["vrf"])
if ipaddress:
st.log("Unsupported attribute ipaddress")
return 0
command += " summary"
elif cli_type in ["rest-patch", "rest-put"]:
show_arp(dut, ipaddress=None, interface=None, vrf="", cli_type="")
if interface:
out = show_arp(dut, interface=interface, cli_type=cli_type)
if 'vrf' in kwargs:
out = show_arp(dut, vrf=kwargs['vrf'], cli_type=cli_type)
if ipaddress:
out = show_arp(dut, ipaddress=ipaddress, cli_type=cli_type)
if not (interface and kwargs.get('vrf') and ipaddress):
out = show_arp(dut, cli_type=cli_type)
return len(out)
else:
st.error("Unsupported CLI_TYPE: {}".format(cli_type))
return False
output = st.show(dut, command, type=cli_type)
out = dicts_list_values(output, 'count')
return int(out[0]) if out else 0
def verify_pddf_psuutils(dut, *argv, **kwargs):
"""
Author: Prudvi Mangadu ([email protected])
:param dut:
:param argv:
:return:
"""
result = True
for each_mode in argv:
output = show_pddf_psuutils(dut, each_mode)
if "numpsus" in each_mode and int(output['numpsus']) != len(
kwargs['psu_list']):
st.error("Incorrect Number of PSUs detected.")
result = False
if "status" in each_mode:
psu_li = cutils.dicts_list_values(output, "psu")
for psu in kwargs['psu_list']:
if psu not in psu_li:
st.error("PSU - {} is not present in DUT.")
result = False
status_li = cutils.dicts_list_values(output, "status")
for status in status_li:
if status not in ['NOT OK', 'OK']:
st.error("Invalid PSU status in DUT.")
result = False
if "OK" not in status_li:
st.error("None of the PSU status is - OK")
result = False
if "mfrinfo" in each_mode:
status_li = cutils.dicts_list_values(output, "psu_status")
if "OK" not in status_li:
st.error("None of the PSU status is - OK")
result = False
if 'seninfo' in each_mode:
status_li = cutils.dicts_list_values(output, "psu_status")
if "OK" not in status_li:
st.error("None of the PSU status is - OK")
result = False
for each in ['voltage', 'current', 'power']:
if '0.0' in cutils.dicts_list_values(output, "each"):
st.error("{} in 'seninfo' is 0.0".format(each))
result = False
if '0' in cutils.dicts_list_values(output, "fan_speed"):
st.error("fan_speed in 'seninfo' is 0.0")
result = False
return result
def get_arp_count(dut, ipaddress=None, interface=None):
"""
To get arp count
Author: Prudvi Mangadu ([email protected])
:param dut:
:param ipaddress:
:param interface:
:return:
"""
command = "show arp"
if ipaddress:
command += " {}".format(ipaddress)
if interface:
command += " -if {}".format(interface)
command += " | grep 'Total number of entries'"
output = st.show(dut, command)
out = dicts_list_values(output, 'count')
return int(out[0]) if out else 0
def get_dict_from_redis_cli(data):
"""
This will convert show_redis_cli_key_search.tmpl output to the dict(key value pair)
Author : Prudvi Mangadu ([email protected])
:param data:
:return:
EX:
data = [{'id': '1', 'name': 'sample'}, {'id': '2', 'name': '100'}, {'id': '3', 'name': 'ipaddress-type'},
{'id': '4', 'name': 'ipv4'}]
return output: {'ipaddress-type': 'ipv4', 'sample': '100'}
"""
id_list = dicts_list_values(data, 'id')
chunks = [id_list[x:x + 2] for x in xrange(0, len(id_list), 2)]
output = {
filter_and_select(data, ['name'], {'id': each[0]})[0]['name']:
filter_and_select(data, ['name'], {'id': each[1]})[0]['name']
for each in chunks
}
return output
def get_all_interfaces(dut, int_type=None, cli_type="click"):
"""
Author: Chaitanya Vella ([email protected])
API to get all the interfaces nin DUT
:param dut: dut object
:param int_type: physical | port_channel
:param cli_type:
:return: interface list
"""
output = interface_status_show(dut, cli_type=cli_type)
out = dicts_list_values(output, 'interface')
if out:
if int_type == 'physical':
return [each for each in out if each.startswith("Ethernet")]
elif int_type == 'port_channel':
return [
each for each in out if each.lower().startswith("portchannel")
]
else:
return out
else:
return []
def verify_port_table_port_config(dut, itter_count=30, delay=1):
"""
To verify the Port Table Port config status
Author: Prudvi Mangadu ([email protected])
:param dut:
:param itter_count:
:param delay:
:return:
"""
command = redis.build(dut, redis.APPL_DB, "HGETALL PORT_TABLE:PortConfigDone")
i = 1
while True:
output = st.show(dut, command)
output_list = utils.filter_and_select(output, ["name"], None)
output_list = utils.dicts_list_values(output_list, "name")
if 'count' in output_list:
st.log("{}".format(output))
return True
if i > itter_count:
st.log("Max {} tries Exceeded.Exiting..".format(i))
return False
i += 1
st.wait(delay)
