def layercake_volume_ascii_regulargrid_mpiregularmap(filename=None,verticalsandwich=False,onlysurface=False):
import sys
import start as start
#
mpiflag,iproc,numproc,mpi = start.start_mpi()
#
numpy = start.start_numpy()
cfg = start.start_cfg(filename=filename)
from utilities import geo2utm, savegeometry,savesurf,cubit_command_check
from math import sqrt
#
try:
mpi.barrier()
except:
pass
#
#
command = "comment '"+"PROC: "+str(iproc)+"/"+str(numproc)+" '"
cubit_command_check(iproc,command,stop=True)
if verticalsandwich: cubit.cmd("comment 'Starting Vertical Sandwich'")
#
#get icpuy,icpux values
if mpiflag:
icpux = iproc % cfg.nproc_xi
icpuy = int(iproc / cfg.nproc_xi)
else:
icpuy=int(cfg.id_proc/cfg.nproc_xi)
icpux=cfg.id_proc%cfg.nproc_xi
#
if cfg.geometry_format == 'ascii':
#for the original surfaces
#number of points in the files that describe the topography
import local_volume
if cfg.localdir_is_globaldir:
if iproc == 0 or not mpiflag:
coordx_0,coordy_0,elev_0,nx_0,ny_0=local_volume.read_grid(filename)
print 'end of reading grd files '+str(nx_0*ny_0)+ ' points'
else:
pass
if iproc == 0 or not mpiflag:
coordx=mpi.bcast(coordx_0)
else:
coordx=mpi.bcast()
if iproc == 0 or not mpiflag:
coordy=mpi.bcast(coordy_0)
else:
coordy=mpi.bcast()
if iproc == 0 or not mpiflag:
elev=mpi.bcast(elev_0)
else:
elev=mpi.bcast()
if iproc == 0 or not mpiflag:
nx=mpi.bcast(nx_0)
else:
nx=mpi.bcast()
if iproc == 0 or not mpiflag:
ny=mpi.bcast(ny_0)
else:
ny=mpi.bcast()
else:
coordx,coordy,elev,nx,ny=local_volume.read_grid(filename)
print str(iproc)+ ' end of receving grd files '
nx_segment=int(nx/cfg.nproc_xi)+1
ny_segment=int(ny/cfg.nproc_eta)+1
elif cfg.geometry_format=='regmesh': # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
if cfg.depth_bottom != cfg.zdepth[0]:
if iproc == 0: print 'the bottom of the block is at different depth than depth[0] in the configuration file'
nx= cfg.nproc_xi+1
ny= cfg.nproc_eta+1
nx_segment=2
ny_segment=2
#if iproc == 0: print nx,ny,cfg.cpux,cfg.cpuy
xp=(cfg.xmax-cfg.xmin)/float((nx-1))
yp=(cfg.ymax-cfg.ymin)/float((ny-1))
#
elev=numpy.zeros([nx,ny,cfg.nz],float)
coordx=numpy.zeros([nx,ny],float)
coordy=numpy.zeros([nx,ny],float)
#
#
xlength=(cfg.xmax-cfg.xmin)/float(cfg.nproc_xi) #length of x slide for chunk
ylength=(cfg.ymax-cfg.ymin)/float(cfg.nproc_eta) #length of y slide for chunk
nelem_chunk_x=1
nelem_chunk_y=1
ivxtot=nelem_chunk_x+1
ivytot=nelem_chunk_y+1
xstep=xlength #distance between vertex on x
ystep=ylength
for i in range(0,cfg.nz):
elev[:,:,i] = cfg.zdepth[i]
icoord=0
for iy in range(0,ny):
for ix in range(0,nx):
icoord=icoord+1
coordx[ix,iy]=cfg.xmin+xlength*(ix)
coordy[ix,iy]=cfg.ymin+ylength*(iy)
#print coordx,coordy,nx,ny
#
print 'end of building grid '+str(iproc)
print 'number of point: ', len(coordx)*len(coordy)
#
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#for each processor
#
nxmin_cpu=(nx_segment-1)*(icpux)
nymin_cpu=(ny_segment-1)*(icpuy)
nxmax_cpu=min(nx-1,(nx_segment-1)*(icpux+1))
nymax_cpu=min(ny-1,(ny_segment-1)*(icpuy+1))
#if iproc == 0:
# print nx_segment,ny_segment,nx,ny
# print icpux,icpuy,nxmin_cpu,nxmax_cpu
# print icpux,icpuy,nymin_cpu,nymax_cpu
# print coordx[0,0],coordx[nx-1,ny-1]
# print coordy[0,0],coordy[nx-1,ny-1]
#
#
icurve=0
isurf=0
ivertex=0
#
#create vertex
for inz in range(0,cfg.nz):
if cfg.sea and inz==cfg.nz-1: #sea layer
sealevel=True
bathymetry=False
elif cfg.sea and inz==cfg.nz-2: #bathymetry layer
sealevel=False
bathymetry=True
else:
sealevel=False
bathymetry=False
print sealevel,bathymetry
if cfg.bottomflat and inz == 0: #bottom layer
#
if cfg.geometry_format == 'ascii':
lv=cubit.get_last_id("vertex")
x_current,y_current=(coordx[nxmin_cpu,nymin_cpu],coordy[nxmin_cpu,nymin_cpu])
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
x_current,y_current=(coordx[nxmin_cpu,nymax_cpu],coordy[nxmin_cpu,nymax_cpu])
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
x_current,y_current=(coordx[nxmax_cpu,nymax_cpu],coordy[nxmax_cpu,nymax_cpu])
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
x_current,y_current=(coordx[nxmax_cpu,nymin_cpu],coordy[nxmax_cpu,nymin_cpu])
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
lv2=cubit.get_last_id("vertex")
cubitcommand= 'create surface vertex '+str(lv+1)+' to '+str(lv2)
cubit.cmd(cubitcommand)
#
isurf = isurf + 1
else:
lv=cubit.get_last_id("vertex")
x_current,y_current=geo2utm(coordx[nxmin_cpu,nymin_cpu],coordy[nxmin_cpu,nymin_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
x_current,y_current=geo2utm(coordx[nxmin_cpu,nymax_cpu],coordy[nxmin_cpu,nymax_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
x_current,y_current=geo2utm(coordx[nxmax_cpu,nymax_cpu],coordy[nxmax_cpu,nymax_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
x_current,y_current=geo2utm(coordx[nxmax_cpu,nymin_cpu],coordy[nxmax_cpu,nymin_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( cfg.depth_bottom )
cubit.cmd(cubitcommand)
#
lv2=cubit.get_last_id("vertex")
cubitcommand= 'create surface vertex '+str(lv+1)+' to '+str(lv2)
cubit.cmd(cubitcommand)
#
isurf = isurf + 1
else:
if cfg.geometry_format == 'regmesh':
zvertex=cfg.zdepth[inz]
lv=cubit.get_last_id("vertex")
x_current,y_current=geo2utm(coordx[nxmin_cpu,nymin_cpu],coordy[nxmin_cpu,nymin_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( zvertex )
cubit.cmd(cubitcommand)
#
x_current,y_current=geo2utm(coordx[nxmin_cpu,nymax_cpu],coordy[nxmin_cpu,nymax_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( zvertex )
cubit.cmd(cubitcommand)
#
x_current,y_current=geo2utm(coordx[nxmax_cpu,nymax_cpu],coordy[nxmax_cpu,nymax_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( zvertex )
cubit.cmd(cubitcommand)
#
x_current,y_current=geo2utm(coordx[nxmax_cpu,nymin_cpu],coordy[nxmax_cpu,nymin_cpu],'utm')
cubitcommand= 'create vertex '+ str( x_current )+ ' ' + str( y_current) +' '+ str( zvertex )
cubit.cmd(cubitcommand)
#
cubitcommand= 'create surface vertex '+str(lv+1)+' '+str(lv+2)+' '+str(lv+3)+' '+str(lv+4)
cubit.cmd(cubitcommand)
#
isurf = isurf + 1
elif cfg.geometry_format == 'ascii':
vertex=[]
for iy in range(nymin_cpu,nymax_cpu+1):
ivx=0
for ix in range(nxmin_cpu,nxmax_cpu+1):
zvertex=elev[ix,iy,inz]
#zvertex=adjust_sea_layers(zvertex,sealevel,bathymetry,cfg)
x_current,y_current=(coordx[ix,iy],coordy[ix,iy])
#
vertex.append(' Position '+ str( x_current ) +' '+ str( y_current )+' '+ str( zvertex ) )
#
print 'proc',iproc, 'vertex list created....',len(vertex)
n=max(nx,ny)
uline=[]
vline=[]
iv=0
cubit.cmd("set info off")
cubit.cmd("set echo off")
cubit.cmd("set journal off")
for iy in range(0,nymax_cpu-nymin_cpu+1):
positionx=''
for ix in range(0,nxmax_cpu-nxmin_cpu+1):
positionx=positionx+vertex[iv]
iv=iv+1
command='create curve spline '+positionx
cubit.cmd(command)
#print command
uline.append( cubit.get_last_id("curve") )
for ix in range(0,nxmax_cpu-nxmin_cpu+1):
positiony=''
for iy in range(0,nymax_cpu-nymin_cpu+1):
positiony=positiony+vertex[ix+iy*(nxmax_cpu-nxmin_cpu+1)]
command='create curve spline '+positiony
cubit.cmd(command)
#print command
vline.append( cubit.get_last_id("curve") )
#
cubit.cmd("set info "+cfg.cubit_info)
cubit.cmd("set echo "+cfg.echo_info)
cubit.cmd("set journal "+cfg.jou_info)
#
#
print 'proc',iproc, 'lines created....',len(uline),'*',len(vline)
umax=max(uline)
umin=min(uline)
vmax=max(vline)
vmin=min(vline)
ner=cubit.get_error_count()
cubitcommand= 'create surface net u curve '+ str( umin )+' to '+str( umax )+ ' v curve '+ str( vmin )+ ' to '+str( vmax )+' heal'
cubit.cmd(cubitcommand)
ner2=cubit.get_error_count()
if ner == ner2:
command = "del curve all"
cubit.cmd(command)
isurf=isurf+1
#
else:
raise NameError, 'error, check geometry_format, it should be ascii or regmesh' #
#
cubitcommand= 'del vertex all'
cubit.cmd(cubitcommand)
if cfg.save_surface_cubit:
savegeometry(iproc=iproc,surf=True,filename=filename)
#
#
#!create volume
if not onlysurface:
if cfg.nz == 1:
nsurface=2
else:
nsurface=cfg.nz
for inz in range(1,nsurface):
ner=cubit.get_error_count()
create_volume(inz,inz+1,method=cfg.volumecreation_method)
ner2=cubit.get_error_count()
if ner == ner2 and not cfg.debug_geometry:
#cubitcommand= 'del surface 1 to '+ str( cfg.nz )
cubitcommand= 'del surface all'
cubit.cmd(cubitcommand)
list_vol=cubit.parse_cubit_list("volume","all")
if len(list_vol) > 1:
cubitcommand= 'imprint volume all'
cubit.cmd(cubitcommand)
cubitcommand= 'merge all'
cubit.cmd(cubitcommand)
#ner=cubit.get_error_count()
#cubitcommand= 'composite create curve in vol all'
#cubit.cmd(cubitcommand)
savegeometry(iproc,filename=filename)
#if cfg.geological_imprint:
# curvesname=[cfg.outlinebasin_curve,cfg.transition_curve,cfg.faulttrace_curve]
# outdir=cfg.working_dir
# imprint_topography_with_geological_outline(curvesname,outdir)
#
#
cubit.cmd("set info "+cfg.cubit_info)
cubit.cmd("set echo "+cfg.echo_info)
cubit.cmd("set journal "+cfg.jou_info)
def layercake_volume_ascii_regulargrid_mpiregularmap(filename=None,
verticalsandwich=False,
onlysurface=False):
import sys
import start as start
#
mpiflag, iproc, numproc, mpi = start.start_mpi()
#
numpy = start.start_numpy()
cfg = start.start_cfg(filename=filename)
from utilities import geo2utm, savegeometry, savesurf, cubit_command_check
from math import sqrt
#
try:
mpi.barrier()
except:
pass
#
#
command = "comment '" + "PROC: " + str(iproc) + "/" + str(numproc) + " '"
cubit_command_check(iproc, command, stop=True)
if verticalsandwich: cubit.cmd("comment 'Starting Vertical Sandwich'")
#
#get icpuy,icpux values
if mpiflag:
icpux = iproc % cfg.nproc_xi
icpuy = int(iproc / cfg.nproc_xi)
else:
icpuy = int(cfg.id_proc / cfg.nproc_xi)
icpux = cfg.id_proc % cfg.nproc_xi
#
if cfg.geometry_format == 'ascii':
#for the original surfaces
#number of points in the files that describe the topography
import local_volume
if cfg.localdir_is_globaldir:
if iproc == 0 or not mpiflag:
coordx_0, coordy_0, elev_0, nx_0, ny_0 = local_volume.read_grid(
filename)
print 'end of reading grd files ' + str(
nx_0 * ny_0) + ' points'
else:
pass
if iproc == 0 or not mpiflag:
coordx = mpi.bcast(coordx_0)
else:
coordx = mpi.bcast()
if iproc == 0 or not mpiflag:
coordy = mpi.bcast(coordy_0)
else:
coordy = mpi.bcast()
if iproc == 0 or not mpiflag:
elev = mpi.bcast(elev_0)
else:
elev = mpi.bcast()
if iproc == 0 or not mpiflag:
nx = mpi.bcast(nx_0)
else:
nx = mpi.bcast()
if iproc == 0 or not mpiflag:
ny = mpi.bcast(ny_0)
else:
ny = mpi.bcast()
else:
coordx, coordy, elev, nx, ny = local_volume.read_grid(filename)
print str(iproc) + ' end of receving grd files '
nx_segment = int(nx / cfg.nproc_xi) + 1
ny_segment = int(ny / cfg.nproc_eta) + 1
elif cfg.geometry_format == 'regmesh': # !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
if cfg.depth_bottom != cfg.zdepth[0]:
if iproc == 0:
print 'the bottom of the block is at different depth than depth[0] in the configuration file'
nx = cfg.nproc_xi + 1
ny = cfg.nproc_eta + 1
nx_segment = 2
ny_segment = 2
#if iproc == 0: print nx,ny,cfg.cpux,cfg.cpuy
xp = (cfg.xmax - cfg.xmin) / float((nx - 1))
yp = (cfg.ymax - cfg.ymin) / float((ny - 1))
#
elev = numpy.zeros([nx, ny, cfg.nz], float)
coordx = numpy.zeros([nx, ny], float)
coordy = numpy.zeros([nx, ny], float)
#
#
xlength = (cfg.xmax - cfg.xmin) / float(
cfg.nproc_xi) #length of x slide for chunk
ylength = (cfg.ymax - cfg.ymin) / float(
cfg.nproc_eta) #length of y slide for chunk
nelem_chunk_x = 1
nelem_chunk_y = 1
ivxtot = nelem_chunk_x + 1
ivytot = nelem_chunk_y + 1
xstep = xlength #distance between vertex on x
ystep = ylength
for i in range(0, cfg.nz):
elev[:, :, i] = cfg.zdepth[i]
icoord = 0
for iy in range(0, ny):
for ix in range(0, nx):
icoord = icoord + 1
coordx[ix, iy] = cfg.xmin + xlength * (ix)
coordy[ix, iy] = cfg.ymin + ylength * (iy)
#print coordx,coordy,nx,ny
#
print 'end of building grid ' + str(iproc)
print 'number of point: ', len(coordx) * len(coordy)
#
#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#for each processor
#
nxmin_cpu = (nx_segment - 1) * (icpux)
nymin_cpu = (ny_segment - 1) * (icpuy)
nxmax_cpu = min(nx - 1, (nx_segment - 1) * (icpux + 1))
nymax_cpu = min(ny - 1, (ny_segment - 1) * (icpuy + 1))
#if iproc == 0:
# print nx_segment,ny_segment,nx,ny
# print icpux,icpuy,nxmin_cpu,nxmax_cpu
# print icpux,icpuy,nymin_cpu,nymax_cpu
# print coordx[0,0],coordx[nx-1,ny-1]
# print coordy[0,0],coordy[nx-1,ny-1]
#
#
icurve = 0
isurf = 0
ivertex = 0
#
#create vertex
for inz in range(0, cfg.nz):
if cfg.sea and inz == cfg.nz - 1: #sea layer
sealevel = True
bathymetry = False
elif cfg.sea and inz == cfg.nz - 2: #bathymetry layer
sealevel = False
bathymetry = True
else:
sealevel = False
bathymetry = False
print sealevel, bathymetry
if cfg.bottomflat and inz == 0: #bottom layer
#
if cfg.geometry_format == 'ascii':
lv = cubit.get_last_id("vertex")
x_current, y_current = (coordx[nxmin_cpu,
nymin_cpu], coordy[nxmin_cpu,
nymin_cpu])
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
x_current, y_current = (coordx[nxmin_cpu,
nymax_cpu], coordy[nxmin_cpu,
nymax_cpu])
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
x_current, y_current = (coordx[nxmax_cpu,
nymax_cpu], coordy[nxmax_cpu,
nymax_cpu])
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
x_current, y_current = (coordx[nxmax_cpu,
nymin_cpu], coordy[nxmax_cpu,
nymin_cpu])
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
lv2 = cubit.get_last_id("vertex")
cubitcommand = 'create surface vertex ' + str(
lv + 1) + ' to ' + str(lv2)
cubit.cmd(cubitcommand)
#
isurf = isurf + 1
else:
lv = cubit.get_last_id("vertex")
x_current, y_current = geo2utm(coordx[nxmin_cpu, nymin_cpu],
coordy[nxmin_cpu,
nymin_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
x_current, y_current = geo2utm(coordx[nxmin_cpu, nymax_cpu],
coordy[nxmin_cpu,
nymax_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
x_current, y_current = geo2utm(coordx[nxmax_cpu, nymax_cpu],
coordy[nxmax_cpu,
nymax_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
x_current, y_current = geo2utm(coordx[nxmax_cpu, nymin_cpu],
coordy[nxmax_cpu,
nymin_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(cfg.depth_bottom)
cubit.cmd(cubitcommand)
#
lv2 = cubit.get_last_id("vertex")
cubitcommand = 'create surface vertex ' + str(
lv + 1) + ' to ' + str(lv2)
cubit.cmd(cubitcommand)
#
isurf = isurf + 1
else:
if cfg.geometry_format == 'regmesh':
zvertex = cfg.zdepth[inz]
lv = cubit.get_last_id("vertex")
x_current, y_current = geo2utm(coordx[nxmin_cpu, nymin_cpu],
coordy[nxmin_cpu,
nymin_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(zvertex)
cubit.cmd(cubitcommand)
#
x_current, y_current = geo2utm(coordx[nxmin_cpu, nymax_cpu],
coordy[nxmin_cpu,
nymax_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(zvertex)
cubit.cmd(cubitcommand)
#
x_current, y_current = geo2utm(coordx[nxmax_cpu, nymax_cpu],
coordy[nxmax_cpu,
nymax_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(zvertex)
cubit.cmd(cubitcommand)
#
x_current, y_current = geo2utm(coordx[nxmax_cpu, nymin_cpu],
coordy[nxmax_cpu,
nymin_cpu], 'utm')
cubitcommand = 'create vertex ' + str(x_current) + ' ' + str(
y_current) + ' ' + str(zvertex)
cubit.cmd(cubitcommand)
#
cubitcommand = 'create surface vertex ' + str(
lv + 1) + ' ' + str(lv + 2) + ' ' + str(lv +
3) + ' ' + str(lv +
4)
cubit.cmd(cubitcommand)
#
isurf = isurf + 1
elif cfg.geometry_format == 'ascii':
vertex = []
for iy in range(nymin_cpu, nymax_cpu + 1):
ivx = 0
for ix in range(nxmin_cpu, nxmax_cpu + 1):
zvertex = elev[ix, iy, inz]
#zvertex=adjust_sea_layers(zvertex,sealevel,bathymetry,cfg)
x_current, y_current = (coordx[ix, iy], coordy[ix, iy])
#
vertex.append(' Position ' + str(x_current) + ' ' +
str(y_current) + ' ' + str(zvertex))
#
print 'proc', iproc, 'vertex list created....', len(vertex)
n = max(nx, ny)
uline = []
vline = []
iv = 0
cubit.cmd("set info off")
cubit.cmd("set echo off")
cubit.cmd("set journal off")
for iy in range(0, nymax_cpu - nymin_cpu + 1):
positionx = ''
for ix in range(0, nxmax_cpu - nxmin_cpu + 1):
positionx = positionx + vertex[iv]
iv = iv + 1
command = 'create curve spline ' + positionx
cubit.cmd(command)
#print command
uline.append(cubit.get_last_id("curve"))
for ix in range(0, nxmax_cpu - nxmin_cpu + 1):
positiony = ''
for iy in range(0, nymax_cpu - nymin_cpu + 1):
positiony = positiony + vertex[
ix + iy * (nxmax_cpu - nxmin_cpu + 1)]
command = 'create curve spline ' + positiony
cubit.cmd(command)
#print command
vline.append(cubit.get_last_id("curve"))
#
cubit.cmd("set info " + cfg.cubit_info)
cubit.cmd("set echo " + cfg.echo_info)
cubit.cmd("set journal " + cfg.jou_info)
#
#
print 'proc', iproc, 'lines created....', len(uline), '*', len(
vline)
umax = max(uline)
umin = min(uline)
vmax = max(vline)
vmin = min(vline)
ner = cubit.get_error_count()
cubitcommand = 'create surface net u curve ' + str(
umin) + ' to ' + str(umax) + ' v curve ' + str(
vmin) + ' to ' + str(vmax) + ' heal'
cubit.cmd(cubitcommand)
ner2 = cubit.get_error_count()
if ner == ner2:
command = "del curve all"
cubit.cmd(command)
isurf = isurf + 1
#
else:
raise NameError, 'error, check geometry_format, it should be ascii or regmesh' #
#
cubitcommand = 'del vertex all'
cubit.cmd(cubitcommand)
if cfg.save_surface_cubit:
savegeometry(iproc=iproc, surf=True, filename=filename)
#
#
#!create volume
if not onlysurface:
if cfg.nz == 1:
nsurface = 2
else:
nsurface = cfg.nz
for inz in range(1, nsurface):
ner = cubit.get_error_count()
create_volume(inz, inz + 1, method=cfg.volumecreation_method)
ner2 = cubit.get_error_count()
if ner == ner2 and not cfg.debug_geometry:
#cubitcommand= 'del surface 1 to '+ str( cfg.nz )
cubitcommand = 'del surface all'
cubit.cmd(cubitcommand)
list_vol = cubit.parse_cubit_list("volume", "all")
if len(list_vol) > 1:
cubitcommand = 'imprint volume all'
cubit.cmd(cubitcommand)
cubitcommand = 'merge all'
cubit.cmd(cubitcommand)
#ner=cubit.get_error_count()
#cubitcommand= 'composite create curve in vol all'
#cubit.cmd(cubitcommand)
savegeometry(iproc, filename=filename)
#if cfg.geological_imprint:
# curvesname=[cfg.outlinebasin_curve,cfg.transition_curve,cfg.faulttrace_curve]
# outdir=cfg.working_dir
# imprint_topography_with_geological_outline(curvesname,outdir)
#
#
cubit.cmd("set info " + cfg.cubit_info)
cubit.cmd("set echo " + cfg.echo_info)
cubit.cmd("set journal " + cfg.jou_info)
def mesh_layercake_regularmap(filename=None):
import sys,os
import start as start
mpiflag,iproc,numproc,mpi = start.start_mpi()
from utilities import importgeometry,savemesh,get_v_h_list,cubit_command_check
#
numpy = start.start_numpy()
cfg = start.start_cfg(filename=filename)
from math import sqrt
from sets import Set
#
class cubitvolume:
def __init__(self,ID,intervalv,centerpoint,dimension):
self.ID=ID
self.intervalv=intervalv
self.centerpoint=centerpoint
self.dim=dimension
def __repr__(self):
msg="(vol:%3i, vertical interval: %4i, centerpoint: %8.2f)" % (self.ID, self.intervalv,self.centerpoint)
return msg
#
def by_z(x,y):
return cmp(x.centerpoint,y.centerpoint)
#
#
#
list_vol=cubit.parse_cubit_list("volume","all")
if len(list_vol) != 0:
pass
else:
geometryfile='geometry_vol_'+str(iproc)+'.cub'
importgeometry(geometryfile,iproc=iproc)
#
command = 'composite create curve all'
cubit.cmd(command)
print '###"No valid composites can be created from the specified curves." is NOT a critical ERROR.'
#
command = "compress all"
cubit.cmd(command)
list_vol=cubit.parse_cubit_list("volume","all")
nvol=len(list_vol)
vol=[]
for id_vol in list_vol:
p=cubit.get_center_point("volume",id_vol)
vol.append(cubitvolume(id_vol,1,p[2],0))
vol.sort(by_z)
#
for id_vol in range(0,nvol):
vol[id_vol].intervalv=cfg.iv_interval[id_vol]
#
#
surf_vertical=[]
surf_or=[]
top_surface=0
top_surface_add=''
bottom_surface=0
#
zmin_box=cubit.get_total_bounding_box("volume",list_vol)[6]
xmin_box=cubit.get_total_bounding_box("volume",list_vol)[0]
xmax_box=cubit.get_total_bounding_box("volume",list_vol)[1]
ymin_box=cubit.get_total_bounding_box("volume",list_vol)[3]
ymax_box=cubit.get_total_bounding_box("volume",list_vol)[4]
#
#
#interval assignement
surf_or,surf_vertical,list_curve_or,list_curve_vertical,bottom,top = get_v_h_list(list_vol,chktop=cfg.chktop)
print 'vertical surfaces: ',surf_vertical
for k in surf_vertical:
command = "surface "+str(k)+" scheme submap"
cubit.cmd(command)
for k in surf_or:
command = "surface "+str(k)+" scheme "+cfg.or_mesh_scheme
cubit.cmd(command)
#
ucurve,vcurve=get_uv_curve(list_curve_or)
schemepave=False
#
ucurve_interval={}
for k in ucurve:
length=cubit.get_curve_length(k)
interval=int(2*round(.5*length/cfg.size,0))
ucurve_interval[k]=interval
command = "curve "+str(k)+" interval "+str(interval)
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
command = "curve "+str(k)+" scheme equal"
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
if max(ucurve_interval.values()) != min(ucurve_interval.values()):
schemepave=True
print 'mesh scheme is set to pave'
for sk in surf_or:
command = "surface "+str(sk)+" scheme pave"
cubit.cmd(command)
#
vcurve_interval={}
for k in vcurve:
length=cubit.get_curve_length(k)
interval=int(2*round(.5*length/cfg.size,0))
vcurve_interval[k]=interval
command = "curve "+str(k)+" interval "+str(interval)
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
command = "curve "+str(k)+" scheme equal"
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
if max(vcurve_interval.values()) != min(vcurve_interval.values()):
print 'mesh scheme is set to pave'
schemepave=True
for sk in surf_or:
command = "surface "+str(sk)+" scheme pave"
cubit.cmd(command)
#
for s in surf_vertical:
lcurve=cubit.get_relatives("surface",s,"curve")
interval_store=[]
for k in lcurve:
interval_curve=cubit.get_mesh_intervals('curve',k)
if k in list_curve_vertical:
volume_id = cubit.get_owning_volume("curve", k)
for idv in range(0,nvol):
if vol[idv].ID == volume_id:
int_v=vol[idv].intervalv
command = "curve "+str(k)+" interval "+str(int_v)
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
command = "curve "+str(k)+" scheme equal"
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
else:
interval_store.append((k,interval_curve))
if len(interval_store) != 0:
interval_min=min([iv[1] for iv in interval_store])
command = "curve "+' '.join(str(iv[0]) for iv in interval_store)+" interval "+str(interval_min)
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
command = "curve "+' '.join(str(iv[0]) for iv in interval_store)+" scheme equal"
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
command = "surface "+str(s)+" scheme submap"
cubit.cmd(command)
#cubit_error_stop(iproc,command,ner)
#
#meshing
if cfg.or_mesh_scheme == 'pave' or schemepave:
command='mesh surf '+' '.join(str(t) for t in top)
status=cubit_command_check(iproc,command,stop=True)
#cubit.cmd(command)
elif cfg.or_mesh_scheme == 'map':
command='mesh surf '+' '.join(str(t) for t in bottom)
status=cubit_command_check(iproc,command,stop=True)
#cubit.cmd(command)
for id_volume in range(nvol-1,-1,-1):
command = "mesh vol "+str(vol[id_volume].ID)
status=cubit_command_check(iproc,command,stop=False)
if not status:
for s in surf_vertical:
command_surf="mesh surf "+str(s)
cubit.cmd(command_surf)
command_set_meshvol='volume all redistribute nodes on\nvolume all autosmooth target off\nvolume all scheme Sweep Vector 0 0 -1\nvolume all sweep smooth Auto\n'
status=cubit_command_check(iproc,command_set_meshvol,stop=False)
status=cubit_command_check(iproc,command,stop=True)
#
#smoothing
print iproc, 'untangling...'
cmd="volume all smooth scheme untangle beta 0.02 cpu 10"
cubit.cmd(cmd)
cmd="smooth volume all"
cubit.cmd(cmd)
if cfg.smoothing:
print 'smoothing .... '+str(cfg.smoothing)
cubitcommand= 'surf all smooth scheme laplacian '
cubit.cmd(cubitcommand)
cubitcommand= 'smooth surf all'
cubit.cmd(cubitcommand)
#
cubitcommand= 'vol all smooth scheme laplacian '
cubit.cmd(cubitcommand)
cubitcommand= 'smooth vol all'
cubit.cmd(cubitcommand)
#
#
##vertical refinement
##for nvol = 3
##
##___________________________ interface 4
##
##vol 2
##___________________________ interface 3
##
##vol 1
##___________________________ interface 2
##
##vol 0
##___________________________ interface 1
##
refinement(nvol,vol,filename=filename)
#
#top layer vertical coarsening
print 'coarsening top layer... ',cfg.coarsening_top_layer
if cfg.coarsening_top_layer:
from sets import Set
cubitcommand= 'del mesh vol '+str(vol[-1].ID)+ ' propagate'
cubit.cmd(cubitcommand)
s1=Set(list_curve_vertical)
command = "group 'list_curve_tmp' add curve "+"in vol "+str(vol[-1].ID)
cubit.cmd(command)
group=cubit.get_id_from_name("list_curve_tmp")
list_curve_tmp=cubit.get_group_curves(group)
command = "delete group "+ str(group)
cubit.cmd(command)
s2=Set(list_curve_tmp)
lc=list(s1 & s2)
#
cubitcommand= 'curve '+' '.join(str(x) for x in lc)+' interval '+str(cfg.actual_vertical_interval_top_layer)
cubit.cmd(cubitcommand)
cubitcommand= 'mesh vol '+str(vol[-1].ID)
cubit.cmd(cubitcommand)
#
n=cubit.get_sideset_id_list()
if len(n) != 0:
command = "del sideset all"
cubit.cmd(command)
n=cubit.get_block_id_list()
if len(n) != 0:
command = "del block all"
cubit.cmd(command)
#
import boundary_definition
entities=['face']
print iproc, 'hex block definition...'
boundary_definition.define_bc(entities,parallel=True,cpux=cfg.cpux,cpuy=cfg.cpuy,cpuxmin=0,cpuymin=0,optionsea=False)
#save mesh
print iproc, 'untangling...'
cmd="volume all smooth scheme untangle beta 0.02 cpu 10"
cubit.cmd(cmd)
cmd="smooth volume all"
cubit.cmd(cmd)
print iproc, 'saving...'
savemesh(mpiflag,iproc=iproc,filename=filename)
def mesh_layercake_regularmap(filename=None):
import start as start
mpiflag, iproc, numproc, mpi = start.start_mpi()
from utilities import importgeometry, savemesh, get_v_h_list
from utilities import cubit_command_check, get_cubit_version
#
# numpy = start.start_numpy()
cfg = start.start_cfg(filename=filename)
# from math import sqrt
version_cubit = get_cubit_version()
list_vol = cubit.parse_cubit_list("volume", "all")
if len(list_vol) != 0:
pass
else:
geometryfile = 'geometry_vol_' + str(iproc) + '.cub'
importgeometry(geometryfile, iproc=iproc)
command = 'composite create curve all'
cubit.cmd(command)
print('###"No valid composites can be created from the specified curves." \
is NOT a critical ERROR.')
#
command = "compress all"
cubit.cmd(command)
list_vol = cubit.parse_cubit_list("volume", "all")
nvol = len(list_vol)
vol = []
for id_vol in list_vol:
p = cubit.get_center_point("volume", id_vol)
vol.append(cubitvolume(id_vol, 1, p[2], 0))
vol.sort(by_z)
#
for id_vol in range(0, nvol):
vol[id_vol].intervalv = cfg.iv_interval[id_vol]
#
#
surf_vertical = []
surf_or = []
# top_surface = 0
# top_surface_add = ''
# bottom_surface = 0
# #
# zmin_box = cubit.get_total_bounding_box("volume", list_vol)[6]
# xmin_box = cubit.get_total_bounding_box("volume", list_vol)[0]
# xmax_box = cubit.get_total_bounding_box("volume", list_vol)[1]
# ymin_box = cubit.get_total_bounding_box("volume", list_vol)[3]
# ymax_box = cubit.get_total_bounding_box("volume", list_vol)[4]
#
#
# interval assignement
surf_or, surf_vertical, list_curve_or, list_curve_vertical, \
bottom, top = get_v_h_list(list_vol, chktop=cfg.chktop)
print('vertical surfaces: ', surf_vertical)
for k in surf_vertical:
command = "surface " + str(k) + " scheme submap"
cubit.cmd(command)
for k in surf_or:
command = "surface " + str(k) + " scheme " + cfg.or_mesh_scheme
cubit.cmd(command)
#
ucurve, vcurve = get_uv_curve(list_curve_or)
schemepave = False
#
ucurve_interval = {}
for k in ucurve:
length = cubit.get_curve_length(k)
interval = int(2 * round(.5 * length / cfg.size, 0))
ucurve_interval[k] = interval
command = "curve " + str(k) + " interval " + str(interval)
cubit.cmd(command)
# cubit_error_stop(iproc,command,ner)
command = "curve " + str(k) + " scheme equal"
cubit.cmd(command)
# cubit_error_stop(iproc,command,ner)
if max(ucurve_interval.values()) != min(ucurve_interval.values()):
schemepave = True
print('mesh scheme is set to pave')
for sk in surf_or:
command = "surface " + str(sk) + " scheme pave"
cubit.cmd(command)
#
vcurve_interval = {}
for k in vcurve:
length = cubit.get_curve_length(k)
interval = int(2 * round(.5 * length / cfg.size, 0))
vcurve_interval[k] = interval
command = "curve " + str(k) + " interval " + str(interval)
cubit.cmd(command)
# cubit_error_stop(iproc,command,ner)
command = "curve " + str(k) + " scheme equal"
cubit.cmd(command)
# cubit_error_stop(iproc,command,ner)
if max(vcurve_interval.values()) != min(vcurve_interval.values()):
print('mesh scheme is set to pave')
schemepave = True
for sk in surf_or:
command = "surface " + str(sk) + " scheme pave"
cubit.cmd(command)
#
for s in surf_vertical:
lcurve = cubit.get_relatives("surface", s, "curve")
interval_store = []
for k in lcurve:
interval_curve = cubit.get_mesh_intervals('curve', k)
if k in list_curve_vertical:
volume_id = cubit.get_owning_volume("curve", k)
for idv in range(0, nvol):
if vol[idv].ID == volume_id:
int_v = vol[idv].intervalv
command = "curve " + str(k) + " interval " + str(int_v)
cubit.cmd(command)
# cubit_error_stop(iproc,command,ner)
command = "curve " + str(k) + " scheme equal"
cubit.cmd(command)
# cubit_error_stop(iproc,command,ner)
else:
interval_store.append((k, interval_curve))
if len(interval_store) != 0:
interval_min = min([iv[1] for iv in interval_store])
str_interval = [str(iv[0]) for iv in interval_store]
cmd = "curve " + ' '.join(str_interval) + \
" interval " + str(interval_min)
cubit.cmd(cmd)
command = "curve " + \
' '.join(str(iv[0])
for iv in interval_store) + " scheme equal"
cubit.cmd(command)
command = "surface " + str(s) + " scheme submap"
cubit.cmd(command)
# meshing
if cfg.or_mesh_scheme == 'pave' or schemepave:
command = 'mesh surf ' + ' '.join(str(t) for t in top)
status = cubit_command_check(iproc, command, stop=True)
# cubit.cmd(command)
elif cfg.or_mesh_scheme == 'map':
command = 'mesh surf ' + ' '.join(str(t) for t in bottom)
status = cubit_command_check(iproc, command, stop=True)
# cubit.cmd(command)
for id_volume in range(nvol - 1, -1, -1):
command = "mesh vol " + str(vol[id_volume].ID)
status = cubit_command_check(iproc, command, stop=False)
if not status:
for s in surf_vertical:
command_surf = "mesh surf " + str(s)
cubit.cmd(command_surf)
if version_cubit < 16:
command_set_meshvol = '''volume all redistribute nodes on
volume all autosmooth target off
volume all scheme Sweep Vector 0 0 -1
volume all sweep smooth Auto
'''
else:
command_set_meshvol = '''volume all redistribute nodes on
volume all autosmooth target off
volume all scheme Sweep Vector 0 0 -1
'''
status2 = cubit_command_check(
iproc, command_set_meshvol, stop=False)
status2 = cubit_command_check(iproc, command, stop=False)
if not status2:
_surf = cubit.get_relatives(
'volume', vol[id_volume].ID, 'surface')
local_o_surf = [x for x in _surf if x in surf_or]
cubit.cmd('volume ' + str(vol[id_volume].ID) +
' redistribute nodes off')
cubit.cmd('volume ' + str(vol[id_volume].ID) +
' scheme Sweep source surface ' +
' '.join(str(x) for x in local_o_surf[0:-1]) +
' target surface ' + str(local_o_surf[-1]))
cubit.cmd('volume ' + str(vol[id_volume].ID) +
' autosmooth_target off')
status = cubit_command_check(iproc, command, stop=True)
#
# smoothing
print(iproc, 'untangling...')
cmd = "volume all smooth scheme untangle beta 0.02 cpu 10"
cubit.cmd(cmd)
cmd = "smooth volume all"
cubit.cmd(cmd)
if cfg.smoothing:
print('smoothing .... ' + str(cfg.smoothing))
cubitcommand = 'surf all smooth scheme laplacian '
cubit.cmd(cubitcommand)
cubitcommand = 'smooth surf all'
cubit.cmd(cubitcommand)
#
cubitcommand = 'vol all smooth scheme laplacian '
cubit.cmd(cubitcommand)
cubitcommand = 'smooth vol all'
cubit.cmd(cubitcommand)
#
#
# vertical refinement
# for nvol = 3
##
# ___________________________ interface 4
##
# vol 2
# ___________________________ interface 3
##
# vol 1
# ___________________________ interface 2
##
# vol 0
# ___________________________ interface 1
##
refinement(nvol, vol, filename=filename)
#
# top layer vertical coarsening
print('coarsening top layer... ', cfg.coarsening_top_layer)
if cfg.coarsening_top_layer:
cubitcommand = 'del mesh vol ' + str(vol[-1].ID) + ' propagate'
cubit.cmd(cubitcommand)
s1 = set(list_curve_vertical)
command = "group 'list_curve_tmp' add curve " + \
"in vol " + str(vol[-1].ID)
cubit.cmd(command)
group = cubit.get_id_from_name("list_curve_tmp")
list_curve_tmp = cubit.get_group_curves(group)
command = "delete group " + str(group)
cubit.cmd(command)
s2 = set(list_curve_tmp)
lc = list(s1 & s2)
#
cubitcommand = 'curve ' + \
' '.join(str(x) for x in lc) + ' interval ' + \
str(cfg.actual_vertical_interval_top_layer)
cubit.cmd(cubitcommand)
cubitcommand = 'mesh vol ' + str(vol[-1].ID)
cubit.cmd(cubitcommand)
#
n = cubit.get_sideset_id_list()
if len(n) != 0:
command = "del sideset all"
cubit.cmd(command)
n = cubit.get_block_id_list()
if len(n) != 0:
command = "del block all"
cubit.cmd(command)
#
import boundary_definition
entities = ['face']
print(iproc, 'hex block definition...')
boundary_definition.define_bc(entities, parallel=True,
cpux=cfg.cpux, cpuy=cfg.cpuy,
cpuxmin=0, cpuymin=0, optionsea=False)
# save mesh
print(iproc, 'untangling...')
cmd = "volume all smooth scheme untangle beta 0.02 cpu 10"
cubit.cmd(cmd)
cmd = "smooth volume all"
cubit.cmd(cmd)
print(iproc, 'saving...')
savemesh(mpiflag, iproc=iproc, filename=filename)
