def _ifup_vlan_with_slave_bond_hwaddr_sync(vlan):
"""
When NM is active and the network includes a vlan on top of a bond, the
following scenario may occur:
- VLAN over a bond with slaves is already defined in the system and
VDSM is about to acquire it to define on it a network.
- The VLAN iface is re-created while the bond slaves are temporary
detached, causing the vlan to be created with the bond temporary
mac address, which is different from the original existing address.
Therefore, following the VLAN ifup command, its mac address is compared
with the first bond slave. In case they differ, the vlan device is
recreated.
Bond mode 5 & 6 is excluded from the mac sync check.
"""
bond = vlan.device
bond_mode = Ifcfg._get_bond_mode(bond)
if not bond.slaves or bond_mode == '5' or bond_mode == '6':
_ifup(vlan)
return
blocking = _blocking_action_required(vlan)
for attempt in range(5):
if blocking:
_ifup(vlan, blocking=blocking)
else:
with waitfor.waitfor_link_exists(vlan.name):
_ifup(vlan, blocking=blocking)
vlan_hwaddr = link_iface.iface(vlan.name).address()
slaves_hwaddr = [
link_iface.iface(slave.name).address() for slave in bond.slaves
]
if slaves_hwaddr[0] == vlan_hwaddr:
return
bond_hwaddr = link_iface.iface(bond.name).address()
logging.info(
'%s. vlan@bond hwaddr is not in sync (v/b/[s]): %s/%s/%s',
attempt,
vlan_hwaddr,
bond_hwaddr,
slaves_hwaddr,
)
ifdown(vlan.name)
raise ConfigNetworkError(
ERR_BAD_BONDING,
'While adding vlan {} over bond {}, '
'the bond hwaddr was not in sync '
'whith its slaves.'.format(vlan.name, vlan.device.name),
)
def _ifup_vlan_with_slave_bond_hwaddr_sync(vlan):
"""
When NM is active and the network includes a vlan on top of a bond, the
following scenario may occur:
- VLAN over a bond with slaves is already defined in the system and
VDSM is about to acquire it to define on it a network.
- The VLAN iface is re-created while the bond slaves are temporary
detached, causing the vlan to be created with the bond temporary
mac address, which is different from the original existing address.
Therefore, following the VLAN ifup command, its mac address is compared
with the first bond slave. In case they differ, the vlan device is
recreated.
Bond mode 5 & 6 is excluded from the mac sync check.
"""
bond = vlan.device
bond_mode = Ifcfg._get_bond_mode(bond)
if not bond.slaves or bond_mode == '5' or bond_mode == '6':
_ifup(vlan)
return
blocking = _blocking_action_required(vlan)
for attempt in range(5):
if blocking:
_ifup(vlan, blocking=blocking)
else:
with waitfor.waitfor_link_exists(vlan.name):
_ifup(vlan, blocking=blocking)
vlan_hwaddr = link_iface.iface(vlan.name).address()
slaves_hwaddr = [link_iface.iface(slave.name).address()
for slave in bond.slaves]
if slaves_hwaddr[0] == vlan_hwaddr:
return
bond_hwaddr = link_iface.iface(bond.name).address()
logging.info(
'%s. vlan@bond hwaddr is not in sync (v/b/[s]): %s/%s/%s',
attempt, vlan_hwaddr, bond_hwaddr, slaves_hwaddr)
ifdown(vlan.name)
raise ConfigNetworkError(
ERR_BAD_BONDING,
'While adding vlan {} over bond {}, '
'the bond hwaddr was not in sync '
'whith its slaves.'.format(vlan.name, vlan.device.name))
def _ifup_vlan_with_slave_bond_hwaddr_sync(vlan):
"""
When NM is active and the network includes a vlan on top of a bond, the
following scenario may occur:
- VLAN over a bond with slaves is already defined in the system and
VDSM is about to acquire it to define on it a network.
- The VLAN iface is re-created while the bond slaves are temporary
detached, causing the vlan to be created with the bond temporary
mac address, which is different from the original existing address.
Therefore, following the VLAN ifup command, its mac address is compared
with the first bond slave. In case they differ, the vlan device is
recreated.
"""
bond = vlan.device
if not bond.slaves:
_ifup(vlan)
return
blocking = _blocking_action_required(vlan)
for attempt in range(5):
if blocking:
_ifup(vlan, blocking=blocking)
else:
with waitfor.waitfor_link_exists(vlan.name):
_ifup(vlan, blocking=blocking)
if (link_iface.mac_address(bond.slaves[0].name) ==
link_iface.mac_address(vlan.name)):
return
logging.info('Config vlan@bond: hwaddr not in sync (%s)', attempt)
ifdown(vlan.name)
raise ConfigNetworkError(
ERR_BAD_BONDING,
'While adding vlan {} over bond {}, '
'the bond hwaddr was not in sync '
'whith its slaves.'.format(vlan.name, vlan.device.name))