def cosimulate(self, sim_cycles, dut_factory, ref_factory, args,
arg_types, **kwargs):
return myhdl_cosimulation(
sim_cycles, dut_factory, ref_factory, args, arg_types, **kwargs)
def cosimulate(self, sim_cycles, dut_factory, ref_factory, args,
arg_types, **kwargs):
return myhdl_cosimulation(sim_cycles, dut_factory, ref_factory,
args, arg_types, **kwargs)
def test_data_read(self):
''' The master BFM should send the requested Address and Protections
in the address transaction.
The master BFM should correctly receive the Data and Response in the
response transaction.
'''
cycles = 4000
@block
def testbench(clock):
master_bfm = self.axi_lite.model(
clock, self.nreset, self.axi_lite_interface)
slave_write_bfm = self.SimpleAxiLiteWriteSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
slave_read_bfm = self.SimpleAxiLiteReadSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
add_read_transaction_prob = 0.05
t_check_state = enum(
'IDLE', 'TRANSACTIONS', 'CHECK_RESPONSE')
check_state = Signal(t_check_state.IDLE)
expected = {'addr': 0,
'prot': 0,
'data': 0,
'resp': 0,}
control = {'addr_sent': False,
'data_sent': False,
'rd_data_transaction': None,}
@always(clock.posedge)
def check():
if check_state == t_check_state.IDLE:
if random.random() < add_read_transaction_prob:
# Create the random data that we will request from the
# BFM.
expected['addr'] = random.randint(
0, 2**self.addr_width-1)
expected['prot'] = random.randint(0, 2**len(
self.axi_lite_interface.ARPROT)-1)
# At random times set up an axi lite read transaction
self.axi_lite.add_read_transaction(
read_address=expected['addr'],
read_protection=expected['prot'],
address_delay=random.randint(0, 15),
data_delay=random.randint(0, 15))
control['addr_sent'] = False
control['data_sent'] = False
check_state.next = t_check_state.TRANSACTIONS
elif check_state == t_check_state.TRANSACTIONS:
if self.axi_lite_interface.ARVALID:
# If valid is asserted, the requested address and
# protection should be output.
assert(
self.axi_lite_interface.ARADDR==
expected['addr'])
assert(
self.axi_lite_interface.ARPROT==
expected['prot'])
if self.axi_lite_interface.ARREADY:
# Handshake has occurred.
control['addr_sent'] = True
if (self.axi_lite_interface.RVALID and
self.axi_lite_interface.RREADY):
# Record the response to check that the BFM receives
# and reports it correctly
expected['data'] = (
self.axi_lite_interface.RDATA)
expected['resp'] = (
self.axi_lite_interface.RRESP)
# Handshake has occurred.
control['data_sent'] = True
if (control['addr_sent'] and
control['data_sent']):
# All transactions have occured.
check_state.next = t_check_state.CHECK_RESPONSE
elif check_state == t_check_state.CHECK_RESPONSE:
# Remove the response from the responses Queue and check
# it is correct.
try:
control['rd_data_transaction'] = (
self.axi_lite.read_responses.get(True, timeout=1))
except queue.Empty:
raise Exception("Timeout")
assert(control['rd_data_transaction']['rd_data']==(
expected['data']))
assert(control['rd_data_transaction']['rd_resp']==(
expected['resp']))
check_state.next = t_check_state.IDLE
return check, master_bfm, slave_write_bfm, slave_read_bfm
myhdl_cosimulation(
cycles, None, testbench, self.args, self.arg_types)
def test_write_signals_outside_of_transaction_values(self):
'''
After a transaction has been added to a master BFM and before the
transaction is complete, the following should be true:
Whilst an address transaction has not happened and AWVALID has not
been asserted, or after an address transaction has happened, the value
on AWADDR and AWPROT should be different to that expected during the
address transaction.
Whilst a data transaction has not happened and WVALID has not
been asserted, or after a data transaction has happened, the value on
WDATA and WSTRB should be different to that expected during the data
transaction.
Note: These are not required by the AXI-Lite spec, but are to help
prevent a class of bugs in which the data lines are read outside of
their respective transactions.
'''
cycles = 4000
@block
def testbench(clock):
master_bfm = self.axi_lite.model(
clock, self.nreset, self.axi_lite_interface)
slave_write_bfm = self.SimpleAxiLiteWriteSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
slave_read_bfm = self.SimpleAxiLiteReadSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
add_write_transaction_prob = 0.05
t_check_state = enum(
'IDLE', 'AWAITING_TRANSACTION_FIRST', 'AWAITING_TRANSACTION',
'ADDR_RECEIVED', 'DATA_RECEIVED', 'AWAITING_RESPONSE')
check_state = Signal(t_check_state.IDLE)
expected = {'addr': 0,
'data': 0,
'strbs': 0,
'prot': 0,
'resp': 0,}
@always(clock.posedge)
def check():
def check_address_sigs(
awaiting_transaction=True, do_asserts=True):
'''Check the signals are not what is expected unless
the address transaction is happening.
Return whether a transaction is happening.
'''
if (awaiting_transaction and
self.axi_lite_interface.AWVALID and
self.axi_lite_interface.AWREADY):
return True
elif (awaiting_transaction and
self.axi_lite_interface.AWVALID):
# AWVALID has gone high so the addr should be correct
return False
else:
if do_asserts:
assert(
self.axi_lite_interface.AWADDR !=
expected['addr'])
assert(
self.axi_lite_interface.AWPROT !=
expected['prot'])
return False
def check_data_sigs(
awaiting_transaction=True, do_asserts=True):
'''Check the signals are not what is expected unless
the data transaction is happening.
Return whether a transaction is happening.
'''
if (awaiting_transaction and
self.axi_lite_interface.WVALID and
self.axi_lite_interface.WREADY):
return True
elif (awaiting_transaction and
self.axi_lite_interface.WVALID):
# WVALID has gone high so the data should be correct
return False
else:
if do_asserts:
assert(
self.axi_lite_interface.WDATA !=
expected['data'])
assert(
self.axi_lite_interface.WSTRB !=
expected['strbs'])
return False
if check_state == t_check_state.IDLE:
if random.random() < add_write_transaction_prob:
# Create the random data that we will request from the
# BFM.
expected['addr'] = random.randint(
0, 2**self.addr_width-1)
expected['data'] = random.randint(
0, 2**self.data_width-1)
expected['strbs'] = random.randint(
0, 2**self.wstrb_width-1)
expected['prot'] = random.randint(0, 2**len(
self.axi_lite_interface.AWPROT)-1)
# Set up an axi lite write transaction
self.axi_lite.add_write_transaction(
write_address=expected['addr'],
write_data=expected['data'],
write_strobes=expected['strbs'],
write_protection=expected['prot'],
address_delay=random.randint(0, 15),
data_delay=random.randint(0, 15),
response_ready_delay=random.randint(10, 25))
check_state.next = (
t_check_state.AWAITING_TRANSACTION_FIRST)
elif check_state == t_check_state.AWAITING_TRANSACTION_FIRST:
# In the first cycle, the set up hasn't happened yet so
# we shouldn't check the value.
addr_transaction_happened = (
check_address_sigs(do_asserts=False))
data_transaction_happened = (
check_data_sigs(do_asserts=False))
if (addr_transaction_happened and
data_transaction_happened):
check_state.next = t_check_state.AWAITING_RESPONSE
elif addr_transaction_happened:
check_state.next = t_check_state.ADDR_RECEIVED
elif data_transaction_happened:
check_state.next = t_check_state.DATA_RECEIVED
else:
check_state.next = t_check_state.AWAITING_TRANSACTION
elif check_state == t_check_state.AWAITING_TRANSACTION:
addr_transaction_happened = check_address_sigs()
data_transaction_happened = check_data_sigs()
if (addr_transaction_happened and
data_transaction_happened):
check_state.next = t_check_state.AWAITING_RESPONSE
elif addr_transaction_happened:
check_state.next = t_check_state.ADDR_RECEIVED
elif data_transaction_happened:
check_state.next = t_check_state.DATA_RECEIVED
elif check_state == t_check_state.ADDR_RECEIVED:
addr_transaction_happened = check_address_sigs(False)
data_transaction_happened = check_data_sigs()
if data_transaction_happened:
check_state.next = t_check_state.AWAITING_RESPONSE
elif check_state == t_check_state.DATA_RECEIVED:
addr_transaction_happened = check_address_sigs()
data_transaction_happened = check_data_sigs(False)
if addr_transaction_happened:
check_state.next = t_check_state.AWAITING_RESPONSE
elif check_state == t_check_state.AWAITING_RESPONSE:
check_address_sigs(False)
check_data_sigs(False)
if (self.axi_lite_interface.BVALID and
self.axi_lite_interface.BREADY):
check_state.next = t_check_state.IDLE
else:
pass
return check, master_bfm, slave_write_bfm, slave_read_bfm
myhdl_cosimulation(
cycles, None, testbench, self.args, self.arg_types)
def test_valid(self):
''' Once VALID is asserted it must remain asserted until the handshake
occurs, a rising clock edge at which VALID and READY are both
asserted.
'''
cycles = 4000
@block
def testbench(clock):
master_bfm = self.axi_lite.model(
clock, self.nreset, self.axi_lite_interface)
slave_write_bfm = self.SimpleAxiLiteWriteSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
slave_read_bfm = self.SimpleAxiLiteReadSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
add_write_transaction_prob = 0.05
add_read_transaction_prob = 0.05
check_enable = {'awvalid': False,
'wvalid': False,
'arvalid': False}
@always(clock.posedge)
def check():
if random.random() < add_write_transaction_prob:
# At random times set up an axi lite write transaction
self.axi_lite.add_write_transaction(
write_address=random.randint(
0, 2**self.addr_width-1),
write_data=random.randint(0, 2**self.data_width-1),
write_strobes=random.randint(
0, 2**self.wstrb_width-1),
write_protection=random.randint(0, 2**len(
self.axi_lite_interface.AWPROT)-1),
address_delay=random.randint(0, 15),
data_delay=random.randint(0, 15),
response_ready_delay=random.randint(10, 25))
if random.random() < add_read_transaction_prob:
# At random times set up an axi lite read transaction
self.axi_lite.add_read_transaction(
read_address=random.randint(0, 2**self.addr_width-1),
read_protection=random.randint(0, 2**len(
self.axi_lite_interface.ARPROT)-1),
address_delay=random.randint(0, 15),
data_delay=random.randint(0, 15))
try:
# Try to remove any responses from the responses Queue.
# In this test we are not actually interested in the
# response but we want to prevent the queue from filling
# up
self.axi_lite.write_responses.get(False)
except queue.Empty:
pass
if (self.axi_lite_interface.AWVALID and
self.axi_lite_interface.AWREADY):
# Handshake has occured do not need to check that AWVALID
# stays high.
check_enable['awvalid'] = False
elif self.axi_lite_interface.AWVALID:
# Once AWVALID is set it should remain high until the
# handshake occurs
check_enable['awvalid'] = True
if (self.axi_lite_interface.WVALID and
self.axi_lite_interface.WREADY):
# Handshake has occured do not need to check that WVALID
# stays high.
check_enable['wvalid'] = False
elif self.axi_lite_interface.WVALID:
# Once WVALID is set it should remain high until the
# handshake occurs
check_enable['wvalid'] = True
if (self.axi_lite_interface.ARVALID and
self.axi_lite_interface.ARREADY):
# Handshake has occured do not need to check that ARVALID
# stays high.
check_enable['arvalid'] = False
elif self.axi_lite_interface.ARVALID:
# Once ARVALID is set it should remain high until the
# handshake occurs
check_enable['arvalid'] = True
if check_enable['awvalid']:
assert(
self.axi_lite_interface.AWVALID == True)
if check_enable['wvalid']:
assert(
self.axi_lite_interface.WVALID == True)
if check_enable['arvalid']:
assert(
self.axi_lite_interface.ARVALID == True)
return check, master_bfm, slave_write_bfm, slave_read_bfm
myhdl_cosimulation(
cycles, None, testbench, self.args, self.arg_types)
def test_nreset(self):
''' On nreset the Master should drive ARVALID, AWVALID and WVALID low.
It may only next drive the valid signals one rising edge after the
nreset signal goes high.
We do not care about the other signals.
'''
cycles = 4000
@block
def testbench(clock):
master_bfm = self.axi_lite.model(
clock, self.nreset, self.axi_lite_interface)
slave_write_bfm = self.SimpleAxiLiteWriteSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
slave_read_bfm = self.SimpleAxiLiteReadSlaveBFM(
clock, self.nreset, self.axi_lite_interface)
nreset_high_prob = 0.1
nreset_low_prob = 0.05
add_write_transaction_prob = 0.05
add_read_transaction_prob = 0.05
t_check_state = enum('IDLE', 'CHECK_RESET')
check_state = Signal(t_check_state.IDLE)
@always(clock.posedge)
def check():
if not self.nreset and (random.random() < nreset_high_prob):
self.nreset.next = True
elif self.nreset and (random.random() < nreset_low_prob):
self.nreset.next = False
if random.random() < add_write_transaction_prob:
# At random times set up an axi lite write transaction
self.axi_lite.add_write_transaction(
write_address=random.randint(
0, 2**self.addr_width-1),
write_data=random.randint(0, 2**self.data_width-1),
write_strobes=random.randint(
0, 2**self.wstrb_width-1),
write_protection=random.randint(0, 2**len(
self.axi_lite_interface.AWPROT)-1),
address_delay=random.randint(0, 15),
data_delay=random.randint(0, 15),
response_ready_delay=random.randint(10, 25))
if random.random() < add_read_transaction_prob:
# At random times set up an axi lite read transaction
self.axi_lite.add_read_transaction(
read_address=random.randint(0, 2**self.addr_width-1),
read_protection=random.randint(0, 2**len(
self.axi_lite_interface.ARPROT)-1),
address_delay=random.randint(0, 15),
data_delay=random.randint(0, 15))
try:
# Try to remove any responses from the responses Queue.
# In this test we are not actually interested in the
# response but we want to prevent the queue from filling
# up
self.axi_lite.write_responses.get(False)
except queue.Empty:
pass
try:
# Try to remove any responses from the responses Queue.
# In this test we are not actually interested in the
# response but we want to prevent the queue from filling
# up
self.axi_lite.read_responses.get(False)
except queue.Empty:
pass
if check_state == t_check_state.IDLE:
if not self.nreset:
# Reset has been received so move onto the check_nreset
# state.
check_state.next = t_check_state.CHECK_RESET
if check_state == t_check_state.CHECK_RESET:
assert(
self.axi_lite_interface.ARVALID==False)
assert(
self.axi_lite_interface.AWVALID==False)
assert(
self.axi_lite_interface.WVALID==False)
if self.nreset:
# No longer being nreset so return to IDLE
check_state.next = t_check_state.IDLE
return check, master_bfm, slave_write_bfm, slave_read_bfm
myhdl_cosimulation(
cycles, None, testbench, self.args, self.arg_types)
