def configure_serial_console(vm_name, dev_type, guest_log_file=None):
"""
Configure serial console.
:params vm_name: guest name
:params dev_type: device type
:params guest_log_file: the path of VM log file
"""
guest_xml = VMXML.new_from_inactive_dumpxml(vm_name)
guest_xml.remove_all_device_by_type('serial')
guest_xml.remove_all_device_by_type('console')
serial = Serial(dev_type)
serial.target_port = '0'
console = Console(dev_type)
console.target_port = '0'
console.target_type = 'serial'
if dev_type == "file" and guest_log_file is not None:
serial.sources = console.sources = [{
'path': guest_log_file,
'append': 'off'
}]
guest_xml.add_device(serial)
guest_xml.add_device(console)
guest_xml.sync()
def configure_serial_console(vm_name):
"""Configure serial console"""
# Check the primary serial and set it to pty.
VMXML.set_primary_serial(vm_name, 'pty', '0', None)
# Configure VM pty console.
vm_pty_xml = VMXML.new_from_inactive_dumpxml(vm_name)
vm_pty_xml.remove_all_device_by_type('console')
console = Console()
console.target_port = '0'
console.target_type = 'serial'
vm_pty_xml.add_device(console)
vm_pty_xml.sync()
def configure_serial_console(vm_name):
"""Configure serial console"""
# Check the primary serial and set it to pty.
VMXML.set_primary_serial(vm_name, 'pty', '0', None)
# Configure VM pty console.
vm_pty_xml = VMXML.new_from_inactive_dumpxml(vm_name)
vm_pty_xml.remove_all_device_by_type('console')
console = Console()
console.target_port = '0'
console.target_type = 'serial'
vm_pty_xml.add_device(console)
vm_pty_xml.sync()
def run(test, params, env):
"""
Test virtio/virtio-transitional model of serial device
:param test: Test object
:param params: Dictionary with the test parameters
:param env: Dictionary with test environment
"""
def get_free_pci_slot():
"""
Get a free slot from pcie-to-pci-bridge
:return: The free slot
"""
used_slot = []
for dev in pci_devices:
address = dev.find('address')
if (address is not None
and address.get('bus') == pci_bridge_index):
used_slot.append(address.get('slot'))
for slot_index in range(1, 30):
slot = "%0#4x" % slot_index
if slot not in used_slot:
return slot
return None
def test_data_transfer(dev_type):
"""
Test data transfer between guest and host via console/serial device
:param dev_type: The device type to be tested, console or channel
"""
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
console_xml = vmxml.xmltreefile.find('devices').find(dev_type)
host_path = console_xml.find('source').get('path')
guest_path = '/dev/hvc0' if dev_type == 'console' else '/dev/vport0p1'
test_message = 'virtiochannel'
cat_cmd = "cat %s" % host_path
logfile = "test_data_transfer-%s.log" % dev_type
host_process = aexpect.ShellSession(cat_cmd,
auto_close=False,
output_func=utils_misc.log_line,
output_params=(logfile, ))
guest_session = vm.wait_for_login()
guest_session.cmd_output('echo %s > %s' % (test_message, guest_path))
guest_session.close()
try:
host_process.read_until_last_line_matches(test_message, timeout=10)
except aexpect.exceptions.ExpectError as e:
test.fail('Did not catch the expected output from host side,'
' the detail of the failure: %s' % str(e))
finally:
host_process.close()
vm_name = params.get("main_vm", "avocado-vt-vm1")
vm = env.get_vm(params["main_vm"])
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
backup_xml = vmxml.copy()
add_pcie_to_pci_bridge = params.get("add_pcie_to_pci_bridge")
guest_src_url = params.get("guest_src_url")
virtio_model = params['virtio_model']
# Download and replace image when guest_src_url provided
if guest_src_url:
image_name = params['image_path']
target_path = utils_misc.get_path(data_dir.get_data_dir(), image_name)
if not os.path.exists(target_path):
download.get_file(guest_src_url, target_path)
params["blk_source_name"] = target_path
# Add pcie-to-pci-bridge when it is required
if add_pcie_to_pci_bridge:
pci_controllers = vmxml.get_controllers('pci')
for controller in pci_controllers:
if controller.get('model') == 'pcie-to-pci-bridge':
pci_bridge = controller
break
else:
contr_dict = {
'controller_type': 'pci',
'controller_model': 'pcie-to-pci-bridge'
}
pci_bridge = libvirt.create_controller_xml(contr_dict,
"add_controller",
vm_name)
pci_bridge_index = '%0#4x' % int(pci_bridge.get("index"))
try:
# Update interface to virtio-transitional mode for
# rhel6 guest to make it works for login
iface_params = {'model': 'virtio-transitional'}
libvirt.modify_vm_iface(vm_name, "update_iface", iface_params)
libvirt.set_vm_disk(vm, params)
# vmxml will not be updated since set_vm_disk
# sync with another dumped xml inside the function
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Remove all current serial devices
vmxml.remove_all_device_by_type('serial')
vmxml.remove_all_device_by_type('channel')
vmxml.remove_all_device_by_type('console')
vmxml.del_controller('virtio-serial')
vmxml.sync()
# Add virtio-serial with right model
contr_dict = {
'controller_type': 'virtio-serial',
'controller_model': virtio_model
}
if add_pcie_to_pci_bridge:
pci_devices = vmxml.xmltreefile.find('devices').getchildren()
slot = get_free_pci_slot()
addr = '{"bus": %s, "slot": %s}' % (pci_bridge_index, slot)
contr_dict.update({'controller_addr': addr})
libvirt.create_controller_xml(contr_dict, "add_controller", vm_name)
# vmxml will not be updated since set_vm_disk
# sync with another dumped xml inside the function
vmxml = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
# Add channel and console device attached to virtio-serial bus
target_dict = {'type': 'virtio', 'name': 'ptychannel'}
address_dict = {'type': 'virtio-serial', 'controller': '0', 'bus': '0'}
channel_xml = Channel('pty')
channel_xml.target = target_dict
channel_xml.address = address_dict
console_xml = Console()
console_xml.target_port = '0'
console_xml.target_type = 'virtio'
vmxml.add_device(channel_xml)
vmxml.add_device(console_xml)
vmxml.sync()
if vm.is_alive():
vm.destroy()
vm.start(autoconsole=False)
# Test data transfer via console and channel devices
test_data_transfer('console')
test_data_transfer('channel')
finally:
vm.destroy()
backup_xml.sync()