def get_tpc_intersection(point, direction, box=None):
""" Abstract class to calculate the TPC crossings """
if box is None:
tpc_box = [
TPC.x_min, TPC.x_max, TPC.y_min, TPC.y_max, TPC.z_min, TPC.z_max
]
else:
tpc_box = box
t1 = vtk.mutable(0)
t2 = vtk.mutable(0)
plane1 = vtk.mutable(0)
plane2 = vtk.mutable(0)
entry = [-1., -1., -1.]
exit = [-1., -1., -1.]
l = 5000
ray = [l * direction[0], l * direction[1], l * direction[2]]
end_point = np.add(point, ray).tolist()
vtk.vtkBox().IntersectWithLine(tpc_box, point, end_point, t1, t2, entry,
exit, plane1, plane2)
return [entry, exit]
def __init__(self):
# POINTS
self.points = vtk.vtkPoints()
self.cell = vtk.vtkCellArray()
self.poly = vtk.vtkPolyData()
self.poly.SetPoints(self.points)
self.poly.SetVerts(self.cell)
# mapper = vtk.vtkPolyDataMapper()
# mapper.SetInputData(self.poly)
# self.actor = vtk.vtkActor()
# self.actor.SetMapper(mapper)
# CLIP
box = vtk.vtkBox()
box.SetBounds(0, 1, 0, 1, 0, 1)
self.clipper = vtk.vtkClipPolyData()
self.clipper.SetInputData(self.poly)
self.clipper.SetClipFunction(box)
self.clipper.Update()
mapper_in = vtk.vtkPolyDataMapper()
mapper_in.SetInputConnection(self.clipper.GetOutputPort(1))
actor_in = vtk.vtkActor()
actor_in.SetMapper(mapper_in)
actor_in.GetProperty().SetColor(1, 0, 0)
mapper_out = vtk.vtkPolyDataMapper()
mapper_out.SetInputConnection(self.clipper.GetOutputPort(0))
actor_out = vtk.vtkActor()
actor_out.SetMapper(mapper_out)
actor_out.GetProperty().SetColor(0, 1, 0)
self.actor = vtk.vtkAssembly()
self.actor.AddPart(actor_in)
self.actor.AddPart(actor_out)
for i in range(10000):
self.points_grown_up()
def cutPolyData(dataSet, **kwargs):
# Read options
pt = kwargs.get('point')
normal = kwargs.get('normal')
delta = kwargs.get('maxDist')
if pt == None:
raise RuntimeError('No point provided')
if normal == None:
raise RuntimeError('No normal provided')
# Create plane
plane = vtk.vtkPlane()
plane.SetOrigin(pt[0], pt[1], pt[2])
plane.SetNormal(normal[0], normal[1], normal[2])
cutter = vtk.vtkCutter()
cutter.SetCutFunction(plane)
cutter.SetInputData(dataSet)
if delta == None:
cutter.Update()
return cutter.GetOutput()
else:
# Create a box
box = vtk.vtkBox()
box.SetBounds(pt[0]-delta, pt[0]+delta, pt[1]-delta, pt[1]+delta, pt[2]-delta, pt[2]+delta)
# Clip data with a box
clipper = vtk.vtkClipDataSet()
clipper.SetClipFunction(box)
clipper.SetInputConnection(cutter.GetOutputPort())
clipper.InsideOutOn()
clipper.Update()
return clipper.GetOutput()
def extractDataSetByBounds(fullvtkDataSet, boundvtkDataSet):
"""
Function to extract from a vtkDataSet within bounds of another vtkDataSet.
Returns a extrct filter
"""
# Define a bounding box implicit
if boundvtkDataSet.IsA('vtkDataSet'):
impFunc = vtk.vtkBox()
impFunc.SetBounds(boundvtkDataSet.GetBounds())
elif boundvtkDataSet.IsA('vtkImplicitFunction'):
impFunc = boundvtkDataSet
# Extract all inside and boundaries
if fullvtkDataSet.IsA('vtkPolyData'):
extractFilt = vtk.vtkExtractPolyDataGeometry()
else:
extractFilt = vtk.vtkExtractGeometry()
extractFilt.SetExtractInside(1)
extractFilt.SetExtractBoundaryCells(1)
extractFilt.SetInputData(fullvtkDataSet)
extractFilt.SetImplicitFunction(impFunc)
extractFilt.Update()
return extractFilt
def actor_clip():
sphere = vtk.vtkSphereSource()
sphere.SetCenter(1, 1, 1)
sphere.SetRadius(1)
sphere.Update()
box = vtk.vtkBox()
box.SetBounds(0, 7, -1, 4, -3, 1)
clipper = vtk.vtkClipPolyData()
clipper.SetClipFunction(box)
clipper.SetInputConnection(sphere.GetOutputPort())
clipper.GenerateClippedOutputOn()
clipper.Update()
mapper_in = vtk.vtkPolyDataMapper()
mapper_in.SetInputConnection(clipper.GetOutputPort(1))
actor_in = vtk.vtkActor()
actor_in.SetMapper(mapper_in)
actor_in.GetProperty().SetColor(0, 255, 0)
actor_in.GetProperty().SetPointSize(2)
mapper_out = vtk.vtkPolyDataMapper()
mapper_out.SetInputConnection(clipper.GetOutputPort(0))
actor_out = vtk.vtkActor()
actor_out.SetMapper(mapper_out)
actor_out.GetProperty().SetColor(255, 0, 0)
actor_in.GetProperty().SetPointSize(2)
return actor_in, actor_out
def __init__(self, parent):
QVTKRenderWindowInteractor.__init__(self, parent)
self.renderer = vtk.vtkRenderer()
self.GetRenderWindow().AddRenderer(self.renderer)
interactor = vtk.vtkInteractorStyleSwitch()
self._Iren.SetInteractorStyle(interactor)
self.surface = None
# Remainng calls set up axes.
tprop = vtk.vtkTextProperty()
tprop.SetColor(1,1,1)
# Create a faint outline to go with the axes.
self.outline = vtk.vtkOutlineFilter()
# Initially set up with a box as input. This will be changed
# to a plot once the user clicks something.
self.box = vtk.vtkBox()
self.box.SetBounds(0,10,0,10,0,10)
sample = vtk.vtkSampleFunction()
sample.SetImplicitFunction(self.box)
sample.SetSampleDimensions(2,2,2)
sample.SetModelBounds(0,10,0,10,0,5)
sample.ComputeNormalsOff()
self.outline.SetInputConnection(sample.GetOutputPort())
mapOutline = vtk.vtkPolyDataMapper()
mapOutline.SetInputConnection(self.outline.GetOutputPort())
self.outlineActor = vtk.vtkActor()
self.outlineActor.SetMapper(mapOutline)
self.outlineActor.GetProperty().SetColor(1,1,1)
self.outlineActor.GetProperty().SetOpacity(.25)
self.renderer.AddActor(self.outlineActor)
self.axes = vtk.vtkCubeAxesActor2D()
self.axes.SetCamera(self.renderer.GetActiveCamera())
self.axes.SetFlyModeToOuterEdges()
self.axes.SetLabelFormat("%6.4g")
self.axes.SetFontFactor(0.8)
self.axes.SetAxisTitleTextProperty(tprop)
self.axes.SetAxisLabelTextProperty(tprop)
self.axes.SetXLabel("MPI Rank")
self.axes.SetYLabel("Progress")
self.axes.SetZLabel("Effort")
self.axes.SetInput(sample.GetOutput())
self.renderer.AddViewProp(self.axes)
# Keep original camera around in case it gets changed
self.originalCamera = self.renderer.GetActiveCamera()
self.renderer.GetActiveCamera().Pitch(90) # Want effort to be vertical
self.renderer.GetActiveCamera().OrthogonalizeViewUp()
self.renderer.ResetCamera()
self.renderer.GetActiveCamera().Elevation(15) # Be slightly above the data
def _createTube(self):
logging.debug("In MultiSliceContour::createTube()")
points = vtk.vtkPoints()
for point in self._originalPoints:
points.InsertNextPoint(point)
self._parametricSpline = vtk.vtkParametricSpline()
self._parametricSpline.SetPoints(points)
self._parametricFuntionSource = vtk.vtkParametricFunctionSource()
self._parametricFuntionSource.SetParametricFunction(self._parametricSpline)
self._parametricFuntionSource.SetUResolution(100)
self._tubeFilter = vtk.vtkTubeFilter()
self._tubeFilter.SetNumberOfSides(10)
self._tubeFilter.SetRadius(self._radius)
self._tubeFilter.SetInputConnection(self._parametricFuntionSource.GetOutputPort())
self._tubeActor = []
self._cubes = []
i = 0
for cutter in self._cutters:
cutter.SetInputConnection(self._tubeFilter.GetOutputPort())
cutter.Update()
cube = vtk.vtkBox()
#TODO change imagebounds to planesourceRange
cube.SetBounds(self._scene.slice[i].getBounds())
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(cube)
clip.SetInputConnection(cutter.GetOutputPort())
clip.InsideOutOn()
clip.Update()
self._cubes.append(cube)
tubeMapper=vtk.vtkPolyDataMapper()
tubeMapper.ScalarVisibilityOff()
tubeMapper.SetInputConnection(clip.GetOutputPort())
tubeMapper.GlobalImmediateModeRenderingOn()
tubeActor = vtk.vtkActor()
tubeActor.SetMapper(tubeMapper)
tubeActor.GetProperty().LightingOff()
tubeActor.GetProperty().SetColor(self.lineColor)
tubeActor.SetUserTransform(self._scene.slice[i].resliceTransform.GetInverse())
self._tubeActor.append(tubeActor)
self._scene.renderer.AddActor(tubeActor)
i = i+1
def bound_polydata_by_image(image, poly, threshold):
bound = vtk.vtkBox()
image.ComputeBounds()
b_bound = image.GetBounds()
b_bound = [
b + threshold if (i % 2) == 0 else b - threshold
for i, b in enumerate(b_bound)
]
#print("Bounding box: ", b_bound)
bound.SetBounds(b_bound)
clipper = vtk.vtkClipPolyData()
clipper.SetClipFunction(bound)
clipper.SetInputData(poly)
clipper.InsideOutOn()
clipper.Update()
return clipper.GetOutput()
def __init__(self,model=None):
"""Initilaization method for the MeshVisualization class
This method initializes a new instance of the MeshVisualization
class and visualizes the mesh of the passed GmshModel instance.
Within the method, basic visualization settings are defined, before the
visualization method is called.
Parameters:
model: GmshModel object instance
model for which the mesh has to be visualized
"""
# plausibility checks for input arguments
if model is None:
raise TypeError("No model instance to visualize passed. For the visualization of a model, that model has to be known. Check your input data.")
self.model=model
# set plotting theme
pv.set_plot_theme("paraview") # use Paraview style for plotting
# get necessary model information for the default configuration
physicalIDs=model.getIDsFromTags(model.gmshAPI.getPhysicalGroups(dim=model.dimension)) # get group IDs for physical groups of the highest dimension
modelBBox=model._getGmshModelBoundingBox() # get the overall bounding box of the Gmsh model
# define settings
self.defaultSettings={
"lowerThreshold": min(physicalIDs), # set lower threshold value to minimum value of active scalar field
"upperThreshold": max(physicalIDs), # set upper threshold value to minimum value of active scalar field
"boxBounds": modelBBox.T.reshape(6) # define bounds of extraction box to match bounds of the model (factor 1.25 will be applied automatically)
}
self.currentSettings=cp.deepcopy(self.defaultSettings) # copy default settings as initial version of current settings
# initialize arrays required for proper mesh visualization
self.plotterObj=pv.Plotter(title="GmshModel Mesh Visualization") # initialize plotterObj from pyvista and set title
self.mesh=None # initialize mesh
self.thresholdAlgorithm=None # initialize threshold algorithm
self.extractionBox=vtk.vtkBox() # initiliaze dummy extraction box to update information of boxWidget
self.extractionBoxBounds=pv.PolyData() # initialize dummy extraction box bounds to store information of boxWidget bounds
self.extractionAlgorithm=None # initialize extraction algorithm
self.activeWidgets=[] # initialize list of active widgets
# visualize the model mesh
self.visualizeMesh()
def prepContinents(fnm):
""" This converts vcs continents files to vtkpolydata
Author: Charles Doutriaux
Input: vcs continent file name
"""
if vcsContinents.has_key(fnm):
return vcsContinents[fnm]
poly =vtk.vtkPolyData()
cells = vtk.vtkCellArray()
pts = vtk.vtkPoints()
f=open(fnm)
ln=f.readline()
while ln.strip().split()!=["-99","-99"]:
# Many lines, need to know number of points
N = int(ln.split()[0])
# Now create and store these points
n=0
npts = pts.GetNumberOfPoints()
while n<N:
ln=f.readline()
sp=ln.split()
sn = len(sp)
didIt = False
if sn%2 == 0:
try:
spts = []
for i in range(sn/2):
l,L = float(sp[i*2]),float(sp[i*2+1])
spts.append([l,L])
for p in spts:
pts.InsertNextPoint(p[1],p[0],0.)
n+=sn
didIt = True
except:
didIt = False
if didIt is False:
while len(ln)>2:
l,L=float(ln[:8]),float(ln[8:16])
pts.InsertNextPoint(L,l,0.)
ln=ln[16:]
n+=2
ln = vtk.vtkPolyLine()
ln.GetPointIds().SetNumberOfIds(N/2)
for i in range(N/2): ln.GetPointIds().SetId(i,i+npts)
cells.InsertNextCell(ln)
ln=f.readline()
poly.SetPoints(pts)
poly.SetLines(cells)
# The dataset has some duplicate lines that extend outside of x=[-180, 180],
# which will cause wrapping artifacts for certain projections (e.g.
# Robinson). Clip out the duplicate data:
box = vtk.vtkBox()
box.SetXMin(-180., -90., 0.)
box.SetXMax(180., 90., 1.)
clipper = vtk.vtkClipPolyData()
clipper.SetInputData(poly)
clipper.InsideOutOn()
clipper.SetClipFunction(box)
clipper.Update()
poly = clipper.GetOutput()
vcsContinents[fnm]=poly
return poly
def main():
colors = vtk.vtkNamedColors()
# create a sphere
sphere = vtk.vtkSphere()
sphere.SetRadius(1)
sphere.SetCenter(1, 0, 0)
# create a box
box = vtk.vtkBox()
box.SetBounds(-1, 1, -1, 1, -1, 1)
# combine the two implicit functions
boolean = vtk.vtkImplicitBoolean()
boolean.SetOperationTypeToDifference()
# boolean.SetOperationTypeToUnion()
# boolean.SetOperationTypeToIntersection()
boolean.AddFunction(box)
boolean.AddFunction(sphere)
# The sample function generates a distance function from the implicit
# function. This is then contoured to get a polygonal surface.
sample = vtk.vtkSampleFunction()
sample.SetImplicitFunction(boolean)
sample.SetModelBounds(-1, 2, -1, 1, -1, 1)
sample.SetSampleDimensions(40, 40, 40)
sample.ComputeNormalsOff()
# contour
surface = vtk.vtkContourFilter()
surface.SetInputConnection(sample.GetOutputPort())
surface.SetValue(0, 0.0)
# mapper
mapper = vtk.vtkPolyDataMapper()
mapper.SetInputConnection(surface.GetOutputPort())
mapper.ScalarVisibilityOff()
actor = vtk.vtkActor()
actor.SetMapper(mapper)
actor.GetProperty().EdgeVisibilityOn()
actor.GetProperty().SetColor(colors.GetColor3d('AliceBlue'))
actor.GetProperty().SetEdgeColor(colors.GetColor3d('SteelBlue'))
# A renderer and render window
renderer = vtk.vtkRenderer()
renderer.SetBackground(colors.GetColor3d('Silver'))
# add the actor
renderer.AddActor(actor)
# render window
renwin = vtk.vtkRenderWindow()
renwin.AddRenderer(renderer)
# An interactor
interactor = vtk.vtkRenderWindowInteractor()
interactor.SetRenderWindow(renwin)
# Start
interactor.Initialize()
renwin.Render()
# renderer.GetActiveCamera().AddObserver('ModifiedEvent', CameraModifiedCallback)
renderer.GetActiveCamera().SetPosition(5.0, -4.0, 1.6)
renderer.GetActiveCamera().SetViewUp(0.1, 0.5, 0.9)
renderer.GetActiveCamera().SetDistance(6.7)
renwin.Render()
interactor.Start()
def getModelROIStencil(self):
import time
_t0 = time.time()
t1 = self.__Transform.GetInverse()
roi_type = self.getModelROIType()
roi_orientation = self.getModelROIOrientation()
# bounds, extent and center
b = self.getModelROIBounds()
# abort early if we haven't been fully set up yet
if b is None:
return None
# determine transformed boundary
_index = [[0, 2, 4], [0, 2, 5], [0, 3, 4], [0, 3, 5], [1, 2, 4], [1, 2, 5], [1, 3, 4], [1, 3, 5]]
b_t = [1e38, -1e38, 1e38, -1e38, 1e38, -1e38]
is_identity = True
# is transform identity?
is_identity = self.__Transform.GetMatrix().Determinant() == 1.0
# is_identity = False
for i in range(8):
i2 = _index[i]
pt = [b[i2[0]], b[i2[1]], b[i2[2]]]
_temp = self.__Transform.TransformPoint(pt[0], pt[1], pt[2])
b_t[0] = min(_temp[0], b_t[0])
b_t[1] = max(_temp[0], b_t[1])
b_t[2] = min(_temp[1], b_t[2])
b_t[3] = max(_temp[1], b_t[3])
b_t[4] = min(_temp[2], b_t[4])
b_t[5] = max(_temp[2], b_t[5])
e_t = self._BoundsToExtent(b_t)
# sanity check - check for inversion (caused by negative spacing)
e_t = list(e_t)
for i in range(3):
if e_t[i * 2] > e_t[i * 2 + 1]:
v = e_t[i * 2]
e_t[i * 2] = e_t[i * 2 + 1]
e_t[i * 2 + 1] = v
# expand stencil extent by one pixel on all sides
e_t = (e_t[0] - 1, e_t[1] + 1, e_t[2] - 1, e_t[3] + 1, e_t[4] - 1, e_t[5] + 1)
# make sure we're dealing with ints
e_t = map(int, e_t)
if is_identity:
# fast, but limited to canonical objects
self._StencilGenerator = vtk.vtkROIStencilSource()
else:
# slow, but more generic
self._StencilGenerator = vtk.vtkImplicitFunctionToImageStencil()
self._StencilGenerator.SetOutputOrigin(self.getImageOrigin())
self._StencilGenerator.SetOutputSpacing(self.getImageSpacing())
# set extent of stencil - taking into account transformation
self._StencilGenerator.SetOutputWholeExtent(e_t)
if is_identity:
# use DG's fast routines
if roi_type == "box":
self._StencilGenerator.SetShapeToBox()
elif roi_type == "cylinder":
if roi_orientation == "X":
self._StencilGenerator.SetShapeToCylinderX()
elif roi_orientation == "Y":
self._StencilGenerator.SetShapeToCylinderY()
elif roi_orientation == "Z":
self._StencilGenerator.SetShapeToCylinderZ()
elif roi_type == "ellipsoid":
self._StencilGenerator.SetShapeToEllipsoid()
self._StencilGenerator.SetBounds(b)
else:
# use JG's slow routines
if roi_type == "box":
obj = vtk.vtkBox()
obj.SetTransform(t1)
obj.SetBounds(b)
elif roi_type == "cylinder":
cyl = vtk.vtkCylinder()
cyl.SetRadius(1.0)
xc, yc, zc = (b[1] + b[0]) * 0.5, (b[3] + b[2]) * 0.5, (b[5] + b[4]) * 0.5
diam_a, diam_b, diam_c = (b[1] - b[0]), (b[3] - b[2]), (b[5] - b[4])
# The cylinder is infinite in extent, so needs to be cropped by using the intersection
# of three implicit functions -- the cylinder, and two cropping
# planes
obj = vtk.vtkImplicitBoolean()
obj.SetOperationTypeToIntersection()
obj.AddFunction(cyl)
clip1 = vtk.vtkPlane()
clip1.SetNormal(0, 1, 0)
obj.AddFunction(clip1)
clip2 = vtk.vtkPlane()
clip2.SetNormal(0, -1, 0)
obj.AddFunction(clip2)
t2 = vtk.vtkTransform()
t2.Translate(xc, yc, zc)
if roi_orientation == "X":
# cylinder is infinite in extent in the y-axis
t2.Scale(1, diam_b / 2.0, diam_c / 2.0)
t2.RotateZ(90)
r = diam_a / 2.0
elif roi_orientation == "Y":
# cylinder is infinite in extent in the y-axis
t2.Scale(diam_a / 2.0, 1, diam_c / 2.0)
r = diam_b / 2.0
elif roi_orientation == "Z":
# cylinder is infinite in extent in the y-axis
t2.Scale(diam_a / 2.0, diam_b / 2.0, 1)
t2.RotateX(90)
r = diam_c / 2.0
clip1.SetOrigin(0, r, 0)
clip2.SetOrigin(0, -r, 0)
# combine transforms
t2.SetInput(self.__Transform)
obj.SetTransform(t2.GetInverse())
elif roi_type == "ellipsoid":
obj = vtk.vtkSphere()
obj.SetRadius(1.0)
xc, yc, zc = (b[1] + b[0]) * 0.5, (b[3] + b[2]) * 0.5, (b[5] + b[4]) * 0.5
diam_a, diam_b, diam_c = (b[1] - b[0]), (b[3] - b[2]), (b[5] - b[4])
t2 = vtk.vtkTransform()
t2.Translate(xc, yc, zc)
t2.Scale(diam_a / 2.0, diam_b / 2.0, diam_c / 2.0)
# combine transforms
t2.SetInput(self.__Transform)
obj.SetTransform(t2.GetInverse())
self._StencilGenerator.SetInput(obj)
_t1 = time.time()
self._StencilGenerator.Update()
_t2 = time.time()
return self._StencilGenerator.GetOutput()
def __init__(self,
name,
file_path="",
density=0,
volume=0,
mass=0,
J_zz=0,
u_CAD=np.zeros(3),
r_CAD=np.zeros(3),
theta=np.zeros(3),
dR=np.zeros(3),
dtheta=np.zeros(3),
color=np.ones(3, dtype="float32"),
_dict={},
connected_to_ground=False,
parent=None):
"""
Constructor of body class
:param name: body name (string)
:param filename: absolute path file of body properties
:param density: density of the material of the body
:param volume: volume of the body (as float) in m^3
:param mass: mass of the body (as float) in kg
:param J_zz: mass moment of inertia of a body against z-axis (as float) in kg*m^2
:param u_CAD: a vector to mass center of a body in body CAD CS (as array) in m
:param r_CAD: a vector to body CAD CS in GCS of a system (as array) in m
:param theta: orientation angles (numpy array) in degrees
:param dR: a vector of velocities (numpy array) in m/s
:param dtheta: a vector of angular velocities (numpy array) in deg/s
:param color: a color vector (RGB)
:param properties_file: a path to mass and geometry properties data in .dat file (todo)
:param geometry_data_file: a path to geometry .stl or .obj file (todo)
"""
super(RigidBody, self).__init__(name=name,
file_path=file_path,
parent=parent)
# type of body
self.body_type = "rigid body"
# body id
self.body_id = self._count()
# body coordinates
self.q_i_size = 3
# geometry and physical properties
self.mass = mass
self.J_zz = J_zz
# size of mass matrix
self.M_size = self.q_i_dim = 3
# material properties
self.density = density
self.volume = volume
# visualization properties
# size
self.size = 1.
# coordinate system properties
self.u_CAD = u_CAD
self.r_CAD = r_CAD
# dynamic properties
# transform with respect to selected CS
# options: CAD, LCS
self.transformCS = "CAD"
self.R = self.u_CAD + self.r_CAD
# (initial) coordinates and angles (in degrees)
self.theta = theta
# (initial) translational and rotational velocities
self.dR = dR
self.dtheta = dtheta
# visualization properties
self.color = color
# connected to ground
self._connected_to_ground = connected_to_ground
# set directory to read body data from file
self.file_path = file_path
# os.chdir(MBD_folder_abs_path)
# read body properties file
if os.path.isfile(self.file_path):
self._dict = read_body_data_file.read_body_data_file(
self.file_path)
self.add_attributes_from_dict(self._dict)
# check if both files exist
if not os.path.isfile(self.file_path):
raise IOError, "Properties file not found!"
if self._geometry_type == self.geometry_file_extension and self.geometry_filename is not None:
if not os.path.isfile(self.geometry_filename):
print "Geometry file %s not found!" % self.geometry_filename
# additional translation due to rotation with respect to CAD CS
# self.u_CAD[0:2] = Ai_ui_P_vector(self.u_CAD[0:2], 0)#self.theta[2]
_R = self.u_CAD - Ai_ui_P_vector(self.u_CAD,
self.theta[2]) #np.zeros(3)#
# reevaluate R, based on body data from .dat file
if all(self.u_CAD == np.zeros(3)) and all(self.r_CAD == np.zeros(3)):
pass
else:
self.R = self.u_CAD + self.r_CAD
# create geometry object
# read geometry file and save vertices and normals
if self._parent is not None:
os.chdir(self._parent._parent.MBD_folder_abs_path)
if self.geometry_filename is not None:
if os.path.isfile(self.geometry_filename):
# get extension
self._geometry_type = os.path.splitext(
self.geometry_filename)[1]
if self._geometry_type == ".stl":
self.geometry = Geometry(self.geometry_filename,
parent=self)
elif self._geometry_type == ".txt":
self.geometry = Geometry2D(self.geometry_filename,
parent=self)
else:
raise ValueError, "Object attribute _geometry_type not correct!"
elif self._geometry_type == "line":
self.geometry = Line(parent=self)
elif self._geometry_type == "cylinder":
self.geometry = vtk.vtkCylinderSource()
self.geometry.SetRadius(self.R0)
self.geometry.SetHeight(self.L)
self.geometry.SetResolution(40)
elif self._geometry_type == "box-cylinder":
self.geometry_list = [None, None]
# create a box
box = vtk.vtkBox()
box.SetBounds(-self.a, +self.a, -self.b, +self.b, -self.c, +self.c)
# create a sphere
cylinder = vtk.vtkCylinder()
cylinder.SetRadius(self.R0)
# cylinder.SetCenter(0,0,0)
geometry_list = [box, cylinder]
# combine the two implicit functions
boolean = vtk.vtkImplicitBoolean()
boolean.SetOperationTypeToDifference()
# boolean.SetOperationTypeToUnion()
# boolean.SetOperationTypeToIntersection()
for geometry in geometry_list:
boolean.AddFunction(geometry)
# The sample function generates a distance function from the implicit
# function. This is then contoured to get a polygonal surface.
sample = vtk.vtkSampleFunction()
sample.SetImplicitFunction(boolean)
sample.SetModelBounds(-10E-3, +10E-3, -10E-3, +10E-3, -10E-3,
+10E-3)
sample.SetSampleDimensions(40, 40, 40)
sample.ComputeNormalsOn()
# contour
self.surface = vtk.vtkContourFilter()
self.surface.SetInputConnection(sample.GetOutputPort())
self.surface.SetValue(0, 0.0)
else:
if self.geometry is None:
print "Body geometry file %s not found! Attribute self.geometry for body %s not created." % (
self.geometry_filename, self._name)
# add additional attributes to geometry object
_dict_geometry = extract_from_dictionary_by_string_in_key(
_dict, "geometry.")
if self.geometry is not None and _dict_geometry:
self.geometry.add_attributes_from_dict(_dict_geometry)
if (self.r_CAD == np.zeros(3)).all() and (self.u_CAD
== np.zeros(3)).all():
self.r_CAD = self.R
def getModelROIStencil(self):
import time
_t0 = time.time()
t1 = self.__Transform.GetInverse()
roi_type = self.getModelROIType()
roi_orientation = self.getModelROIOrientation()
# bounds, extent and center
b = self.getModelROIBounds()
# abort early if we haven't been fully set up yet
if b is None:
return None
# determine transformed boundary
_index = [
[0, 2, 4], [0, 2, 5], [0, 3, 4], [0, 3, 5],
[1, 2, 4], [1, 2, 5], [1, 3, 4], [1, 3, 5],
]
b_t = [1e38, -1e38, 1e38, -1e38, 1e38, -1e38]
is_identity = True
# is transform identity?
is_identity = self.__Transform.GetMatrix().Determinant() == 1.0
#is_identity = False
for i in range(8):
i2 = _index[i]
pt = [b[i2[0]], b[i2[1]], b[i2[2]]]
_temp = self.__Transform.TransformPoint(pt[0], pt[1], pt[2])
b_t[0] = min(_temp[0], b_t[0])
b_t[1] = max(_temp[0], b_t[1])
b_t[2] = min(_temp[1], b_t[2])
b_t[3] = max(_temp[1], b_t[3])
b_t[4] = min(_temp[2], b_t[4])
b_t[5] = max(_temp[2], b_t[5])
e_t = self._BoundsToExtent(b_t)
# sanity check - check for inversion (caused by negative spacing)
e_t = list(e_t)
for i in range(3):
if e_t[i * 2] > e_t[i * 2 + 1]:
v = e_t[i * 2]
e_t[i * 2] = e_t[i * 2 + 1]
e_t[i * 2 + 1] = v
# expand stencil extent by one pixel on all sides
e_t = (e_t[0] - 1, e_t[1] + 1, e_t[2] - 1,
e_t[3] + 1, e_t[4] - 1, e_t[5] + 1)
# make sure we're dealing with ints
e_t = map(int, e_t)
if is_identity:
# fast, but limited to canonical objects
self._StencilGenerator = vtk.vtkROIStencilSource()
else:
# slow, but more generic
self._StencilGenerator = vtk.vtkImplicitFunctionToImageStencil()
self._StencilGenerator.SetOutputOrigin(self.getImageOrigin())
self._StencilGenerator.SetOutputSpacing(self.getImageSpacing())
# set extent of stencil - taking into account transformation
self._StencilGenerator.SetOutputWholeExtent(e_t)
if is_identity:
# use DG's fast routines
if roi_type == 'box':
self._StencilGenerator.SetShapeToBox()
elif roi_type == 'cylinder':
if roi_orientation == 'X':
self._StencilGenerator.SetShapeToCylinderX()
elif roi_orientation == 'Y':
self._StencilGenerator.SetShapeToCylinderY()
elif roi_orientation == 'Z':
self._StencilGenerator.SetShapeToCylinderZ()
elif roi_type == 'ellipsoid':
self._StencilGenerator.SetShapeToEllipsoid()
self._StencilGenerator.SetBounds(b)
else:
# use JG's slow routines
if roi_type == 'box':
obj = vtk.vtkBox()
obj.SetTransform(t1)
obj.SetBounds(b)
elif roi_type == 'cylinder':
cyl = vtk.vtkCylinder()
cyl.SetRadius(1.0)
xc, yc, zc = (b[1] + b[0]) * \
0.5, (b[3] + b[2]) * 0.5, (b[5] + b[4]) * 0.5
diam_a, diam_b, diam_c = (
b[1] - b[0]), (b[3] - b[2]), (b[5] - b[4])
# The cylinder is infinite in extent, so needs to be cropped by using the intersection
# of three implicit functions -- the cylinder, and two cropping
# planes
obj = vtk.vtkImplicitBoolean()
obj.SetOperationTypeToIntersection()
obj.AddFunction(cyl)
clip1 = vtk.vtkPlane()
clip1.SetNormal(0, 1, 0)
obj.AddFunction(clip1)
clip2 = vtk.vtkPlane()
clip2.SetNormal(0, -1, 0)
obj.AddFunction(clip2)
t2 = vtk.vtkTransform()
t2.Translate(xc, yc, zc)
if roi_orientation == 'X':
# cylinder is infinite in extent in the y-axis
t2.Scale(1, diam_b / 2.0, diam_c / 2.0)
t2.RotateZ(90)
r = diam_a / 2.0
elif roi_orientation == 'Y':
# cylinder is infinite in extent in the y-axis
t2.Scale(diam_a / 2.0, 1, diam_c / 2.0)
r = diam_b / 2.0
elif roi_orientation == 'Z':
# cylinder is infinite in extent in the y-axis
t2.Scale(diam_a / 2.0, diam_b / 2.0, 1)
t2.RotateX(90)
r = diam_c / 2.0
clip1.SetOrigin(0, r, 0)
clip2.SetOrigin(0, -r, 0)
# combine transforms
t2.SetInput(self.__Transform)
obj.SetTransform(t2.GetInverse())
elif roi_type == 'ellipsoid':
obj = vtk.vtkSphere()
obj.SetRadius(1.0)
xc, yc, zc = (b[1] + b[0]) * \
0.5, (b[3] + b[2]) * 0.5, (b[5] + b[4]) * 0.5
diam_a, diam_b, diam_c = (
b[1] - b[0]), (b[3] - b[2]), (b[5] - b[4])
t2 = vtk.vtkTransform()
t2.Translate(xc, yc, zc)
t2.Scale(diam_a / 2.0, diam_b / 2.0, diam_c / 2.0)
# combine transforms
t2.SetInput(self.__Transform)
obj.SetTransform(t2.GetInverse())
self._StencilGenerator.SetInput(obj)
_t1 = time.time()
self._StencilGenerator.Update()
_t2 = time.time()
return self._StencilGenerator.GetOutput()
def Execute(args):
print("clip surface")
mesh_reader = vmtkscripts.vmtkMeshReader()
mesh_reader.InputFileName = args.mesh_file
mesh_reader.Execute()
mesh2surf = vmtkscripts.vmtkMeshToSurface()
mesh2surf.Mesh = mesh_reader.Mesh
mesh2surf.CleanOutput = 0
mesh2surf.Execute()
scale_cfd = vmtkscripts.vmtkSurfaceScaling()
scale_cfd.ScaleFactor = args.scale # meters to mm
scale_cfd.Surface = mesh2surf.Surface
scale_cfd.Execute()
surface = vtk.vtkPolyData()
surface.DeepCopy(scale_cfd.Surface)
reader_trim = vmtkscripts.vmtkSurfaceReader()
reader_trim.InputFileName = args.polydata_trim
reader_trim.Execute()
br_trim = reader_trim.Surface
reader_ext = vmtkscripts.vmtkSurfaceReader()
reader_ext.InputFileName = args.polydata_ext
reader_ext.Execute()
br_ext = reader_ext.Surface
# have to make sure that they both have the same number of GetNumberOfPoints
assert br_trim.GetNumberOfPoints() == br_ext.GetNumberOfPoints()
locator = vtk.vtkPointLocator()
locator.SetDataSet(br_trim)
locator.BuildLocator()
point_ext = [0.0, 0.0, 0.0]
pt_cross = [0.0, 0.0, 0.0]
pt_dot = 0.0
count = 0
for trim_id in range(br_ext.GetNumberOfPoints()):
# get extension point
point_ext = br_ext.GetPoint(trim_id)
#closest trim point
point_trim_id = locator.FindClosestPoint(point_ext)
point_trim = br_trim.GetPoint(point_trim_id)
# check that the points are close to the same direction
pt_trim_normal = br_trim.GetPointData().GetArray(
"BoundaryNormals").GetTuple(point_trim_id)
pt_ext_normal = br_ext.GetPointData().GetArray(
"BoundaryNormals").GetTuple(trim_id)
#print(pt_trim_normal, pt_ext_normal)
pt_dot = vtk.vtkMath.Dot(pt_trim_normal, pt_ext_normal)
#vtk.vtkMath.Cross(pt_trim_normal, pt_ext_normal, pt_cross)
#print(pt_dot, vtk.vtkMath.Norm(pt_cross))#, pt_cross)
if (pt_dot < 0.95):
print("help the vectors aren't colinear")
assert pt_dot > .95
v = np.array(point_ext) - np.array(point_trim) #pt1 - pt2
v_mag = np.linalg.norm(v)
n = v / v_mag
# print("should be 1.0", np.linalg.norm(n), n)
b1, b2 = hughes_moeller(n) #orthogonal basis
#Get maximum radius
box_radius = br_ext.GetPointData().GetArray("BoundaryRadius").GetTuple(
trim_id)
box_radius_trim = br_trim.GetPointData().GetArray(
"BoundaryRadius").GetTuple(point_trim_id)
#print(box_radius_trim, box_radius)
extra_room = args.margin
extra_z = 0.0
r_max = extra_room * max([box_radius[0], box_radius_trim[0]
]) # max radius
z_max = extra_room * v_mag
#create transformation matrix
R = np.zeros((4, 4), dtype=np.float64)
R[:3, 0] = b1 #x
R[:3, 1] = b2 #y
R[:3, 2] = n #z
R[:3, 3] = np.array(point_trim) # the beginning of the clip
R[3, 3] = 1.0
trans_matrix = vtk.vtkTransform()
trans_inverse = vtk.vtkTransform()
trans_matrix.SetMatrix(list(R.ravel()))
#print(trans_matrix.GetMatrix())
trans_inverse.DeepCopy(trans_matrix)
trans_inverse.Inverse()
# point to define bounds
dims_min = [-r_max, -r_max, -extra_z * z_max]
dims_max = [r_max, r_max, z_max]
planes = vtk.vtkBox()
planes.SetBounds(dims_min[0], dims_max[0], dims_min[1], dims_max[1],
dims_min[2], dims_max[2])
planes.SetTransform(trans_inverse)
clipper = vtk.vtkTableBasedClipDataSet()
clipper.SetInputData(surface)
clipper.SetClipFunction(planes)
clipper.InsideOutOff()
#clipper.SetMergeTolerance(1.0E-6)
clipper.Update()
#print(clipper.GetMergeTolerance())
surface = clipper.GetOutput()
#test = vtk.vtkCubeSource()
#test.SetBounds (dims_min[0], dims_max[0], dims_min[1], dims_max[1], dims_min[2], dims_max[2])
#trans_cube = vtk.vtkTransformPolyDataFilter()
#trans_cube.SetInputConnection(test.GetOutputPort())
#trans_cube.SetTransform(trans_matrix)
#trans_cube.Update()
#writer2 = vmtkscripts.vmtkSurfaceWriter()
#writer2.OutputFileName = os.path.join(os.path.split(args.out_file)[0], "test_clip_box_{0}.vtp".format(count))
#writer2.Input = trans_cube.GetOutput()
#writer2.Execute()
count += 1
geom = vtk.vtkGeometryFilter()
geom.SetInputData(surface)
geom.Update()
writer = vmtkscripts.vmtkSurfaceWriter()
writer.OutputFileName = args.out_file
writer.Input = geom.GetOutput()
writer.Execute()
def slice_polyplane(mesh,profile,updir='y'):
transL1 = vtk.vtkTransform()
if updir=='y':
transL1.RotateX(90)
elif updir=='x':
transL1.RotateY(90)
elif updir=='z':
pass
trans = vtk.vtkTransformFilter()
trans.SetTransform(transL1)
trans.SetInputData(mesh)
trans.Update()
pts = vtk.vtkPoints()
for pt in profile.points:
pts.InsertNextPoint((pt[0],pt[1],0))
# check if labels are between profile points:
label_abscissae = [0 for k in profile.labels]
x0 = 0
for kpt in range(len(profile.points)-1):
pt0 = profile.points[kpt]
pt1 = profile.points[kpt+1]
dL = ((pt0[0]-pt1[0])**2+(pt0[1]-pt1[1])**2)**0.5
for kppt in range(len(profile.labels)):
pt = profile.labels[kppt][:2]
d0 = ((pt0[0]-pt[0])**2+(pt0[1]-pt[1])**2)**0.5
d1 = ((pt1[0]-pt[0])**2+(pt1[1]-pt[1])**2)**0.5
if d0<dL and d1<=dL:
if abs((d0+d1-dL)/dL)>1e-2:
print('check vtktools.slice_polyplane')
label_abscissae[kppt] = x0+d0
x0 += dL
pd = vtk.vtkPolyData()
pd.SetPoints(pts)
pl = vtk.vtkPolyLine()
pl.GetPointIds().SetNumberOfIds(len(profile.points))
for kpt in range(len(profile.points)):
pl.GetPointIds().SetId(kpt,kpt)
ca = vtk.vtkCellArray()
ca.InsertNextCell(pl)
pd.SetLines(ca)
pd.Allocate(1,1)
pd.InsertNextCell(pl.GetCellType(),pl.GetPointIds())
pl = vtk.vtkPolyLine.SafeDownCast(pd.GetCell(0))
bounds = pl.GetBounds()
box = vtk.vtkBox()
box.SetBounds(bounds[0],bounds[1],bounds[2],bounds[3],-1000,1000)
pplane = vtk.vtkPolyPlane()
pplane.SetPolyLine(pl)
cut = vtk.vtkCutter()
cut.SetInputConnection(trans.GetOutputPort())
cut.SetCutFunction(pplane)
cut.Update()
clip = vtk.vtkClipPolyData()
clip.SetInputConnection(cut.GetOutputPort())
clip.SetClipFunction(box)
clip.InsideOutOn()
clip.Update()
output = clip.GetOutput()
abscissae = []
for kp in range(output.GetNumberOfPoints()):
pt = output.GetPoint(kp)
abscissae.append(project_on_polyline(pt[0],pt[1],pts))
return abscissae,output,label_abscissae
def getvtkdata(self, ci, timestep):
PI= 3.141592654
contour=False
firstval = ci.datafields.split(',')[0]
#print ("First: ", firstval)
if ((firstval == 'vo') or (firstval == 'qc') or (firstval == 'cvo') or (firstval == 'pcvo') or (firstval == 'qcc')):
datafields = 'u'
computation = firstval #We are doing a computation, so we need to know which one.
if ((firstval == 'cvo') or (firstval == 'qcc') or (firstval == 'pcvo')):
overlap = 3 #This was 2, but due to rounding because of the spacing, 3 is required.
#Save a copy of the original request
oci = jhtdblib.CutoutInfo()
oci.xstart = ci.xstart
oci.ystart = ci.ystart
oci.zstart = ci.zstart
oci.xlen = ci.xlen
oci.ylen = ci.ylen
oci.zlen = ci.zlen
ci = self.expandcutout(ci, overlap) #Expand the cutout by the overlap
contour = True
else:
datafields = ci.datafields.split(',') #There could be multiple components, so we will have to loop
computation = ''
#Split component into list and add them to the image
#Check to see if we have a value for vorticity or q contour
fieldlist = list(datafields)
image = vtk.vtkImageData()
rg = vtk.vtkRectilinearGrid()
for field in fieldlist:
if (ci.xlen > 61 and ci.ylen > +61 and ci.zlen > 61 and ci.xstep ==1 and ci.ystep ==1 and ci.zstep ==1 and not contour):
#Do this if cutout is too large
#Note: we don't want to get cubed data if we are doing cubes for contouring.
data=GetData().getcubedrawdata(ci, timestep, field)
else:
data=GetData().getrawdata(ci, timestep, field)
vtkdata = numpy_support.numpy_to_vtk(data.flat, deep=True, array_type=vtk.VTK_FLOAT)
components = Datafield.objects.get(shortname=field).components
vtkdata.SetNumberOfComponents(components)
vtkdata.SetName(Datafield.objects.get(shortname=field).longname)
#We need to see if we need to subtract one on end of extent edges.
image.SetExtent(ci.xstart, ci.xstart+((ci.xlen+ci.xstep-1)/ci.xstep)-1, ci.ystart, ci.ystart+((ci.ylen+ci.ystep-1)/ci.ystep)-1, ci.zstart, ci.zstart+((ci.zlen+ci.zstep-1)/ci.zstep)-1)
#image.SetExtent(ci.xstart, ci.xstart+int(ci.xlen)-1, ci.ystart, ci.ystart+int(ci.ylen)-1, ci.zstart, ci.zstart+int(ci.zlen)-1)
image.GetPointData().AddArray(vtkdata)
if (Datafield.objects.get(shortname=field).longname == "Velocity"):
#Set the Velocity Array as vectors in the image.
image.GetPointData().SetVectors(image.GetPointData().GetArray("Velocity"))
#Get spacing from database and multiply it by the step. Don't do this on the contour--it is performed later on.
#if (contour):
#We need to scale the threshold to the spacing of the dataset. This is because we build the cubes
#on a 1 spacing cube in order to get proper overlap on the contours.
#ci.threshold = ci.threshold*Dataset.objects.get(dbname_text=ci.dataset).xspacing
#else:
xspacing = Dataset.objects.get(dbname_text=ci.dataset).xspacing
yspacing = Dataset.objects.get(dbname_text=ci.dataset).yspacing
zspacing = Dataset.objects.get(dbname_text=ci.dataset).zspacing
#Check if we need a rectilinear grid, and set it up if so.
if (ci.dataset == 'channel'):
ygrid = jhtdblib.JHTDBLib().getygrid()
#print("Ygrid: ")
#print (ygrid)
#Not sure about contouring channel yet, so we are going back to original variables at this point.
rg.SetExtent(ci.xstart, ci.xstart+((ci.xlen+ci.xstep-1)/ci.xstep)-1, ci.ystart, ci.ystart+((ci.ylen+ci.ystep-1)/ci.ystep)-1, ci.zstart, ci.zstart+((ci.zlen+ci.zstep-1)/ci.zstep)-1)
#components = Datafield.objects.get(shortname=field).components
#vtkdata.SetNumberOfComponents(components)
#vtkdata.SetName(Datafield.objects.get(shortname=field).longname)
rg.GetPointData().AddArray(vtkdata)
#import pdb;pdb.set_trace()
#This isn't possible--we will have to do something about this in the future.
#rg.SetSpacing(ci.xstep,ci.ystep,ci.zstep)
xg = np.arange(0,2047.0)
zg = np.arange(0,1535.0)
for x in xg:
xg[x] = 8*PI/2048*x
for z in zg:
zg[z] = 3*PI/2048*z
vtkxgrid=numpy_support.numpy_to_vtk(xg, deep=True,
array_type=vtk.VTK_FLOAT)
vtkzgrid=numpy_support.numpy_to_vtk(zg, deep=True,
array_type=vtk.VTK_FLOAT)
vtkygrid=numpy_support.numpy_to_vtk(ygrid,
deep=True, array_type=vtk.VTK_FLOAT)
rg.SetXCoordinates(vtkxgrid)
rg.SetZCoordinates(vtkzgrid)
rg.SetYCoordinates(vtkygrid)
image = rg #we rewrite the image since we may be doing a
#computation below
else:
image.SetSpacing(xspacing*ci.xstep,yspacing*ci.ystep,zspacing*ci.zstep)
#See if we are doing a computation
if (computation == 'vo'):
start = time.time()
vorticity = vtk.vtkCellDerivatives()
vorticity.SetVectorModeToComputeVorticity()
vorticity.SetTensorModeToPassTensors()
vorticity.SetInputData(image)
#print("Computing Vorticity")
vorticity.Update()
end = time.time()
comptime = end-start
print("Vorticity Computation time: " + str(comptime) + "s")
return image
elif (computation == 'cvo' or computation == 'pcvo'):
start = time.time()
vorticity = vtk.vtkCellDerivatives()
vorticity.SetVectorModeToComputeVorticity()
vorticity.SetTensorModeToPassTensors()
vorticity.SetInputData(image)
#print("Computing Voricity")
vorticity.Update()
vend = time.time()
comptime = vend-start
print("Vorticity Computation time: " + str(comptime) + "s")
mag = vtk.vtkImageMagnitude()
cp = vtk.vtkCellDataToPointData()
cp.SetInputData(vorticity.GetOutput())
#print("Computing magnitude")
cp.Update()
mend = time.time()
image.GetPointData().SetScalars(cp.GetOutput().GetPointData().GetVectors())
mag.SetInputData(image)
mag.Update()
comptime = mend-vend
print("Magnitude Computation time: " + str(comptime) + "s")
c = vtk.vtkContourFilter()
c.SetValue(0,ci.threshold)
c.SetInputData(mag.GetOutput())
print("Computing Contour with threshold", ci.threshold)
c.Update()
cend = time.time()
comptime = cend-mend
print("Contour Computation time: " + str(comptime) + "s")
#Now we need to clip out the overlap
box = vtk.vtkBox()
#set box to requested size
#The OCI deepcopy didn't seem to work. Manually taking the overlap again.
box.SetBounds(oci.xstart*xspacing, (oci.xstart+oci.xlen)*xspacing, oci.ystart*yspacing, (oci.ystart+oci.ylen)*yspacing, oci.zstart*yspacing,(oci.zstart+oci.zlen)*yspacing)
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(box)
clip.GenerateClippedOutputOn()
clip.SetInputData(c.GetOutput())
clip.InsideOutOn()
clip.Update()
#import pdb;pdb.set_trace()
cropdata = clip.GetOutput()
#Cleanup
image.ReleaseData()
#mag.ReleaseData()
#box.ReleaseData()
#clip.ReleaseData()
#image.Delete()
#box.Delete()
#vorticity.Delete()
end = time.time()
comptime = end-start
print("Total Computation time: " + str(comptime) + "s")
#return cropdata
#We need the output port for appending, so return the clip instead
return clip
elif (computation == 'qcc'):
start = time.time()
q = vtk.vtkGradientFilter()
q.SetInputData(image)
q.SetInputScalars(image.FIELD_ASSOCIATION_POINTS,"Velocity")
q.ComputeQCriterionOn()
q.Update()
image.GetPointData().SetScalars(q.GetOutput().GetPointData().GetVectors("Q-criterion"))
#mag = vtk.vtkImageMagnitude()
#mag.SetInputData(image)
#mag.Update()
mend = time.time()
comptime = mend-start
#print("Magnitude Computation time: " + str(comptime) + "s")
c = vtk.vtkContourFilter()
c.SetValue(0,ci.threshold)
c.SetInputData(image)
print("Computing Contour with threshold", ci.threshold)
c.Update()
cend = time.time()
comptime = cend-mend
print("Q Contour Computation time: " + str(comptime) + "s")
#clip out the overlap here
box = vtk.vtkBox()
#set box to requested size
box.SetBounds(oci.xstart, oci.xstart+oci.xlen-1, oci.ystart, oci.ystart+oci.ylen-1, oci.zstart,oci.zstart+oci.zlen-1)
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(box)
clip.GenerateClippedOutputOn()
clip.SetInputData(c.GetOutput())
clip.InsideOutOn()
clip.Update()
cropdata = clip.GetOutput()
end = time.time()
comptime = end-start
print("Computation time: " + str(comptime) + "s")
#return cropdata
return clip
else:
return image
def __init__(self, parent = None):
super(VTKFrame, self).__init__(parent)
self.vtkWidget = QVTKRenderWindowInteractor(self)
vl = QtGui.QVBoxLayout(self)
vl.addWidget(self.vtkWidget)
vl.setContentsMargins(0, 0, 0, 0)
self.ren = vtk.vtkRenderer()
self.vtkWidget.GetRenderWindow().AddRenderer(self.ren)
self.iren = self.vtkWidget.GetRenderWindow().GetInteractor()
resolution = 10
sphere = vtk.vtkSphereSource()
sphere.SetCenter(0.75, 0, 0)
sphere.SetThetaResolution(resolution)
sphere.SetPhiResolution(resolution)
sphere.Update()
# Add ids to the points and cells of the sphere
cellIdFilter = vtk.vtkIdFilter()
cellIdFilter.SetInputConnection(sphere.GetOutputPort())
cellIdFilter.SetCellIds(True)
cellIdFilter.SetPointIds(False)
cellIdFilter.SetIdsArrayName("CellIds")
cellIdFilter.Update()
pointIdFilter = vtk.vtkIdFilter()
pointIdFilter.SetInputConnection(cellIdFilter.GetOutputPort())
pointIdFilter.SetCellIds(False)
pointIdFilter.SetPointIds(True)
pointIdFilter.SetIdsArrayName("PointIds")
pointIdFilter.Update()
sphereWithIds = pointIdFilter.GetOutput()
cube = vtk.vtkCubeSource()
cube.Update()
implicitCube = vtk.vtkBox()
implicitCube.SetBounds(cube.GetOutput().GetBounds())
clipper = vtk.vtkClipPolyData()
clipper.SetClipFunction(implicitCube)
clipper.SetInput(sphereWithIds)
clipper.InsideOutOn()
clipper.Update()
# Create a mapper and actor for clipped sphere
clippedMapper = vtk.vtkPolyDataMapper()
clippedMapper.SetInputConnection(clipper.GetOutputPort())
clippedMapper.ScalarVisibilityOff()
clippedActor = vtk.vtkActor()
clippedActor.SetMapper(clippedMapper)
clippedActor.GetProperty().SetRepresentationToWireframe()
# Create a mapper and actor for the cube
cubeMapper = vtk.vtkPolyDataMapper()
cubeMapper.SetInputConnection(cube.GetOutputPort())
cubeActor = vtk.vtkActor()
cubeActor.SetMapper(cubeMapper)
cubeActor.GetProperty().SetRepresentationToWireframe()
cubeActor.GetProperty().SetOpacity(0.5)
#create renderers and add actors of plane and cube
self.ren.AddActor(clippedActor)
self.ren.AddActor(cubeActor)
self.ren.SetBackground(0.2, 0.3, 0.4)
self.ren.ResetCamera()
self._initialized = False
# create pipeline # points = vtk.vtkBoundedPointSource() points.SetNumberOfPoints(NPts) points.SetBounds(-3, 3, -1, 1, -1, 1) points.ProduceRandomScalarsOn() points.ProduceCellOutputOff() points.Update() # Create a cylinder cyl = vtk.vtkCylinder() cyl.SetCenter(-2, 0, 0) cyl.SetRadius(0.02) # Create a (thin) box implicit function box = vtk.vtkBox() box.SetBounds(-1, 0.5, -0.5, 0.5, -0.0005, 0.0005) # Create a sphere implicit function sphere = vtk.vtkSphere() sphere.SetCenter(2, 0, 0) sphere.SetRadius(0.8) # Boolean (union) these together imp = vtk.vtkImplicitBoolean() imp.SetOperationTypeToUnion() imp.AddFunction(cyl) imp.AddFunction(box) imp.AddFunction(sphere) # Extract points along sphere surface
def __init__(self):
vtkViewImage.__init__(self)
self.FirstRender = 1
self.FirstImage = 1
self.ShowCurrentPoint = True
self.ShowDirections = True
self.ShowSliceNumber = True
self.Orientation = vtkViewImage.AXIAL_ID
self.InteractionStyle = self.SELECT_INTERACTION
self.LeftButtonInteractionStyle = self.SELECT_INTERACTION
self.MiddleButtonInteractionStyle = self.SELECT_INTERACTION
self.RightButtonInteractionStyle = self.SELECT_INTERACTION
self.WheelInteractionStyle = self.SELECT_INTERACTION
self.Conventions = self.RADIOLOGIC
self.InitialParallelScale = 1.0
self.OverlappingImage = None
self.ImageReslice = vtk.vtkImageReslice()
self.ImageActor = vtk.vtkImageActor()
self.WindowLevelForCorner = vtk.vtkImageMapToWindowLevelColors()
self.WindowLevel = vtk.vtkImageMapToColors()
#self.MaskFilter = vtk.vtkImageBlendWithMask()
self.Blender = vtk.vtkImageBlend()
self.HorizontalLineSource = vtk.vtkLineSource()
self.VerticalLineSource = vtk.vtkLineSource()
self.HorizontalLineActor = vtk.vtkActor()
self.VerticalLineActor = vtk.vtkActor()
self.DataSetCutPlane = vtk.vtkPlane()
self.DataSetCutBox = vtk.vtkBox()
self.DataSetCutPlane.SetOrigin(0,0,0)
self.DataSetCutPlane.SetNormal(0,0,1)
self.DataSetCutBox.SetBounds(0, 0, 0, 0, 0, 0)
self.BoxThickness = 2
self.LinkCameraFocalAndPosition = 0
# set the filters properties
self.Blender.SetBlendModeToNormal()
self.Blender.SetOpacity(0, 0.25)
self.Blender.SetOpacity(1, 0.75)
# set up the vtk pipeline
self.ImageReslice.SetOutputDimensionality(2)
self.ImageReslice.InterpolateOff()
self.ImageReslice.SetInputConnection(self.WindowLevel.GetOutputPort())
self.AuxInput = self.WindowLevel.GetOutput()
self.ResliceInput = self.WindowLevel.GetOutput()
# Interactor Style
self.InitInteractorStyle(self.SELECT_INTERACTION)
# Initialize cursor lines
mapper = vtk.vtkPolyDataMapper()
mapper.SetInputConnection(self.HorizontalLineSource.GetOutputPort())
self.HorizontalLineActor.SetMapper(mapper)
self.HorizontalLineActor.GetProperty().SetColor(1.0, 0.0, 0.0)
#del mapper
self.HorizontalLineActor.SetVisibility(0)
mapper2 = vtk.vtkPolyDataMapper()
mapper2.SetInputConnection(self.VerticalLineSource.GetOutputPort())
self.VerticalLineActor.SetMapper(mapper2)
self.VerticalLineActor.GetProperty().SetColor(1.0, 0.0, 0.0)
#del mapper2
self.VerticalLineActor.SetVisibility(0)
self.CornerAnnotation.SetWindowLevel(self.WindowLevelForCorner)
self.SetOrientation(vtkViewImage.AXIAL_ID)
if self.GetViewImage2DDisplayConventions() == 0:
self.SetConventionsToRadiological()
else:
self.SetConventionsToNeurological()
Log("Filtering node set by depth.")
visibleBoneVertices.ComputeBounds()
visibleNodesBounds = visibleBoneVertices.GetBounds()
Log("Bounds of visible bone nodes:",
("%.4f" + " %.4f" * 5) % visibleNodesBounds)
#TODO
#remove last few shaft slices in order to have flat surface
boxBounds = (visibleNodesBounds[0], visibleNodesBounds[1],
visibleNodesBounds[2], visibleNodesBounds[3],
visibleNodesBounds[4], visibleNodesBounds[4] + 10)
Log("Limiting to box bounds:", ("%.4f" + " %.4f" * 5) % boxBounds)
box = vtk.vtkBox()
box.SetBounds(boxBounds)
filter = vtk.vtkExtractGeometry()
filter.SetImplicitFunction(box)
filter.ExtractInsideOn()
filter.ExtractBoundaryCellsOn()
filter.SetInput(0, visibleBoneVertices)
filter.Update()
filteredSurfaceVertices = filter.GetOutput()
Log("Found %d nodes in bounding box." %
filteredSurfaceVertices.GetNumberOfCells())
filteredSurfaceVertices.ComputeBounds()
filteredSurfaceVerticesBounds = filteredSurfaceVertices.GetBounds()
# Save to file so we can examine in ParaView, etc...
depthFilteredBoneNodesFile = os.path.splitext(
def doWrap(Act,wc,wrap=[0.,360], fastClip=True):
if wrap is None:
return Act
Mapper = Act.GetMapper()
data = Mapper.GetInput()
xmn=min(wc[0],wc[1])
xmx=max(wc[0],wc[1])
if numpy.allclose(xmn,1.e20) or numpy.allclose(xmx,1.e20):
xmx = abs(wrap[1])
xmn = -wrap[1]
ymn=min(wc[2],wc[3])
ymx=max(wc[2],wc[3])
if numpy.allclose(ymn,1.e20) or numpy.allclose(ymx,1.e20):
ymx = abs(wrap[0])
ymn = -wrap[0]
## Prepare MultiBlock and puts in oriinal data
appendFilter =vtk.vtkAppendPolyData()
appendFilter.AddInputData(data)
appendFilter.Update()
## X axis wrappping
Amn,Amx = Act.GetXRange()
if wrap[1]!=0.:
i=0
while Amn>xmn:
i+=1
Amn-=wrap[1]
Tpf = vtk.vtkTransformPolyDataFilter()
Tpf.SetInputData(data)
T=vtk.vtkTransform()
T.Translate(-i*wrap[1],0,0)
Tpf.SetTransform(T)
Tpf.Update()
appendFilter.AddInputData(Tpf.GetOutput())
appendFilter.Update()
i=0
while Amx<xmx:
i+=1
Amx+=wrap[1]
Tpf = vtk.vtkTransformPolyDataFilter()
Tpf.SetInputData(data)
T = vtk.vtkTransform()
T.Translate(i*wrap[1],0,0)
Tpf.SetTransform(T)
Tpf.Update()
appendFilter.AddInputData(Tpf.GetOutput())
appendFilter.Update()
# Y axis wrapping
Amn,Amx = Act.GetYRange()
if wrap[0]!=0.:
i=0
while Amn>ymn:
i+=1
Amn-=wrap[0]
Tpf = vtk.vtkTransformPolyDataFilter()
Tpf.SetInputData(data)
T = vtk.vtkTransform()
T.Translate(0,i*wrap[0],0)
Tpf.SetTransform(T)
Tpf.Update()
appendFilter.AddInputData(Tpf.GetOutput())
appendFilter.Update()
i=0
while Amx<ymx:
i+=1
Amx+=wrap[0]
Tpf = vtk.vtkTransformPolyDataFilter()
Tpf.SetInputData(data)
T = vtk.vtkTransform()
T.Translate(0,-i*wrap[0],0)
Tpf.SetTransform(T)
Tpf.Update()
appendFilter.AddInputData(Tpf.GetOutput())
appendFilter.Update()
# Clip the data to the final window:
clipBox = vtk.vtkBox()
clipBox.SetXMin(xmn, ymn, -1.0)
clipBox.SetXMax(xmx, ymx, 1.0)
if fastClip:
clipper = vtk.vtkExtractPolyDataGeometry()
clipper.ExtractInsideOn()
clipper.SetImplicitFunction(clipBox)
clipper.ExtractBoundaryCellsOn()
clipper.PassPointsOff()
else:
clipper = vtk.vtkClipPolyData()
clipper.InsideOutOn()
clipper.SetClipFunction(clipBox)
clipper.SetInputConnection(appendFilter.GetOutputPort())
clipper.Update()
Mapper.SetInputData(clipper.GetOutput())
return Act
actorC.GetProperty().SetAmbient(1)
actorR = vtk.vtkActor()
actorR.SetMapper(mapperR)
actorR.GetProperty().SetRepresentationToWireframe()
actorR.GetProperty().SetAmbient(1)
ren.AddActor(actorL)
ren.AddActor(actorC)
ren.AddActor(actorR)
# Now clip boxes
origin = [0,0,0]
xout = [0,0,0, 0,0,0, 0,0,0, 0,0,0, 0,0,0, 0,0,0]
bds = [0,0, 0,0, 0,0]
clipBox = vtk.vtkBox()
# Left
normal = [1,1,1]
origin = boxL.GetCenter()
pdL = vtk.vtkPolyData()
polyL = vtk.vtkCellArray()
ptsL = vtk.vtkPoints()
pdL.SetPoints(ptsL)
pdL.SetPolys(polyL)
ptsL.SetDataTypeToDouble()
boxL.GetBounds(bds)
numInts = clipBox.IntersectWithPlane(bds, origin, normal, xout)
print("Num ints: ", numInts)
ptsL.SetNumberOfPoints(numInts)
polyL.InsertNextCell(numInts)
def compute_box_func(self, normal, plane_pt, radius):
'''Compute a implicit function for a bounding box.
'''
v = 3 * [0.0]
v[0] = vtk.vtkMath.Random(-10, 10)
v[1] = vtk.vtkMath.Random(-10, 10)
v[2] = vtk.vtkMath.Random(-10, 10)
v1 = 3 * [0.0]
vtk.vtkMath.Cross(normal, v, v1)
vtk.vtkMath.Normalize(v1)
v2 = 3 * [0.0]
vtk.vtkMath.Cross(normal, v1, v2)
matrix = vtk.vtkMatrix4x4()
matrix.Identity()
for i in range(3):
matrix.SetElement(i, 0, normal[i])
matrix.SetElement(i, 1, v1[i])
matrix.SetElement(i, 2, v2[i])
sphere = vtk.vtkSphereSource()
rscale = 2.0
sphere_center = [
plane_pt[i] + rscale * radius * normal[i] for i in range(3)
]
sphere.SetCenter(sphere_center)
sphere.SetRadius(rscale * radius)
sphere.Update()
bounds = 6 * [0.0]
sphere.GetOutput().GetBounds(bounds)
box_func = vtk.vtkBox()
box_func.SetBounds(bounds)
transform = vtk.vtkTransform()
transform.Translate(sphere_center)
#transform.Translate(plane_pt[0], plane_pt[1], plane_pt[2])
transform.Concatenate(matrix)
transform.Scale(1.0, 1.0, 1.0)
transform.Translate(-sphere_center[0], -sphere_center[1],
-sphere_center[2])
#transform.Translate(-plane_pt[0], -plane_pt[1], -plane_pt[2])
transform.Update()
inverse_transform = transform.GetInverse()
#ipt = transform.TransformPoint(plane_pt)
ipt = inverse_transform.TransformPoint(plane_pt)
box_func.SetBounds(bounds)
#box.SetTransform(transform)
box_func.SetTransform(inverse_transform)
cube = vtk.vtkCubeSource()
cube.SetBounds(bounds)
cube.Update()
cube_pd = cube.GetOutput()
transform_pd = vtk.vtkTransformPolyDataFilter()
#transform = vtk.vtkTransform()
#transform.Translate(plane_pt[0], plane_pt[1], plane_pt[2])
#transform.Scale(1.0, 1.0, 1.0)
#transform_pd.SetTransform(inverse_transform);
transform_pd.SetTransform(transform)
transform_pd.SetInputData(cube_pd)
transform_pd.Update()
gr_geom = self.graphics.add_geometry(self.renderer,
transform_pd.GetOutput(),
color=[1.0, 0.0, 1.0])
gr_geom.GetProperty().SetRepresentationToWireframe()
return box_func
def getvtkimage(self, webargs, timestep):
#Setup query
DBSTRING = os.environ['db_connection_string']
conn = pyodbc.connect(DBSTRING, autocommit=True)
cursor = conn.cursor()
#url = "http://localhost:8000/cutout/getcutout/"+ token + "/" + dataset + "/" + datafield + "/" + ts + "," +te + "/" + xs + "," + xe +"/" + ys + "," + ye +"/" + zs + "," + ze
w = webargs.split("/")
ts = int(w[3].split(',')[0])
te = int(w[3].split(',')[1])
xs = int(w[4].split(',')[0])
xe = int(w[4].split(',')[1])
ys = int(w[5].split(',')[0])
ye = int(w[5].split(',')[1])
zs = int(w[6].split(',')[0])
ze = int(w[6].split(',')[1])
extent = (xs, ys, zs, xe, ye, ze)
overlap = 2 #Used only on contours--vorticity and Q-criterion
#Look for step parameters
if (len(w) > 9):
step = True;
s = w[8].split(",")
tstep = s[0]
xstep = float(s[1])
ystep = float(s[2])
zstep = float(s[3])
filterwidth = w[9]
else:
step = False;
xstep = 1
ystep = 1
zstep = 1
filterwidth = 1
cfieldlist = w[2].split(",")
firstval = cfieldlist[0]
maxrange = self.getmaxrange(w[1])
if ((firstval == 'vo') or (firstval == 'qc') or (firstval == 'cvo') or (firstval == 'qcc')):
component = 'u'
computation = firstval #We are doing a computation, so we need to know which one.
#check to see if we have a threshold (only for contours)
if (len(cfieldlist) > 1):
threshold = float(cfieldlist[1])
else:
threshold = .6
#New: We need an expanded cutout if contouring. Push the cutout out by 2 in all directions (unless at boundary).
if ((firstval == 'cvo') or (firstval == 'qcc')):
newextent = self.expandcutout(extent, maxrange[0], maxrange[1], maxrange[2], overlap)
contour = True
else:
component = w[2] #There could be multiple components, so we will have to loop
computation = ''
#Split component into list and add them to the image
#Check to see if we have a value for vorticity or q contour
fieldlist = list(component)
for field in fieldlist:
print("Field = %s" % field)
cursor.execute("{CALL turbdev.dbo.GetAnyCutout(?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}",w[1], field, timestep, extent[0], extent[1], extent[2], xstep, ystep, zstep, 1,1,extent[3], extent[4], extent[5],filterwidth,1)
#If data spans across multiple servers, we get multiple sets, so concatenate them.
row = cursor.fetchone()
raw = row[0]
part = 0
print ("First part size is %d" % len(row[0]))
while(cursor.nextset()):
row = cursor.fetchone()
raw = raw + row[0]
part = part +1
print ("added part %d" % part)
print ("Part size is %d" % len(row[0]))
print ("Raw size is %d" % len(raw))
data = np.frombuffer(raw, dtype=np.float32)
conn.close()
vtkdata = numpy_support.numpy_to_vtk(data, deep=True, array_type=vtk.VTK_FLOAT)
components = self.numcomponents(field)
vtkdata.SetNumberOfComponents(components)
vtkdata.SetName(self.componentname(field))
image = vtk.vtkImageData()
if (step):
xes = int(extent[3])/int(xstep)-1
yes = int(extent[4])/int(ystep)-1
zes = int(extent[5])/int(zstep)-1
image.SetExtent(extent[0], extent[0]+extent[3], extent[1], extent[1]+extent[4], extent[2], extenet[2]+extenet[5])
print("Step extent=" +str(xes))
print("xs=" + str(xstep) + " ys = "+ str(ystep) +" zs = " + str(zstep))
else:
image.SetExtent(extent[0], extent[0]+extent[3]-1, extent[1], extent[1]+extent[4]-1, extent[2], extent[2]+extent[5]-1)
image.GetPointData().SetVectors(vtkdata)
if (step): #Magnify to original size
image.SetSpacing(xstep,ystep,zstep)
#Check if we need a rectilinear grid, and set it up if so.
if (w[1] == 'channel'):
ygrid = self.getygrid()
#print("Ygrid: ")
#print (ygrid)
rg = vtk.vtkRectilinearGrid()
#Not sure about contouring channel yet, so we are going back to original variables at this point.
rg.SetExtent(xs, xs+xe-1, ys, ys+ye-1, zs, zs+ze-1)
rg.GetPointData().SetVectors(vtkdata)
xg = np.arange(float(xs),float(xe))
zg = np.arange(float(zs),float(ze))
for x in xg:
xg[x] = 8*3.141592654/2048*x
for z in zg:
zg[z] = 3*3.141592654/2048*z
vtkxgrid=numpy_support.numpy_to_vtk(xg, deep=True,
array_type=vtk.VTK_FLOAT)
vtkzgrid=numpy_support.numpy_to_vtk(zg, deep=True,
array_type=vtk.VTK_FLOAT)
vtkygrid=numpy_support.numpy_to_vtk(ygrid,
deep=True, array_type=vtk.VTK_FLOAT)
rg.SetXCoordinates(vtkxgrid)
rg.SetZCoordinates(vtkzgrid)
rg.SetYCoordinates(vtkygrid)
image = rg #we rewrite the image since we may be doing a
#computation below
#See if we are doing a computation
if (computation == 'vo'):
vorticity = vtk.vtkCellDerivatives()
vorticity.SetVectorModeToComputeVorticity()
vorticity.SetTensorModeToPassTensors()
vorticity.SetInputData(image)
print("Computing Vorticity")
vorticity.Update()
elif (computation == 'cvo'):
vorticity = vtk.vtkCellDerivatives()
vorticity.SetVectorModeToComputeVorticity()
vorticity.SetTensorModeToPassTensors()
vorticity.SetInputData(image)
print("Computing Voricity")
vorticity.Update()
mag = vtk.vtkImageMagnitude()
cp = vtk.vtkCellDataToPointData()
cp.SetInputData(vorticity.GetOutput())
print("Computing magnitude")
cp.Update()
image.GetPointData().SetScalars(cp.GetOutput().GetPointData().GetVectors())
mag.SetInputData(image)
mag.Update()
c = vtk.vtkContourFilter()
c.SetValue(0,threshold)
c.SetInputData(mag.GetOutput())
print("Computing Contour")
c.Update()
#Now we need to clip out the overlap
box = vtk.vtkBox()
#set box to requested size
box.SetBounds(xs, xs+xe-1, ys, ys+ye-1, zs,zs+ze-1)
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(box)
clip.GenerateClippedOutputOn()
clip.SetInputData(c.GetOutput())
clip.InsideOutOn()
clip.Update()
cropdata = clip.GetOutput()
return cropdata
elif (computation == 'qcc'):
q = vtk.vtkGradientFilter()
q.SetInputData(image)
q.SetInputScalars(image.FIELD_ASSOCIATION_POINTS,"Velocity")
q.ComputeQCriterionOn()
q.Update()
#newimage = vtk.vtkImageData()
image.GetPointData().SetScalars(q.GetOutput().GetPointData().GetVectors("Q-criterion"))
mag = vtk.vtkImageMagnitude()
mag.SetInputData(image)
mag.Update()
c = vtk.vtkContourFilter()
c.SetValue(0,threshold)
c.SetInputData(mag.GetOutput())
c.Update()
#clip out the overlap here
box = vtk.vtkBox()
#set box to requested size
box.SetBounds(xs, xs+xe-1, ys, ys+ye-1, zs,zs+ze-1)
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(box)
clip.GenerateClippedOutputOn()
clip.SetInputData(c.GetOutput())
clip.InsideOutOn()
clip.Update()
cropdata = clip.GetOutput()
return cropdata
else:
return image
except urllib2.HTTPError, e:
#print("Error: %s" % (e.reason))
print("Download failed, trying again")
attempts +=1
# check if file downloaded ok
if attempts == 2:
print("Too many retries. Network error or URL issue.")
raise
else:
print("Cropping")
#Crop out the overlap
reader = vtk.vtkXMLPolyDataReader()
reader.SetFileName("temp" +filename + '.vtp')
reader.Update()
polydata = reader.GetOutput()
box = vtk.vtkBox()
#set box to requested size
box.SetBounds(x0, x0+xl-1, y0, y0+yl-1, z0,z0+zl-1)
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(box)
clip.GenerateClippedOutputOn()
clip.SetInputData(polydata)
clip.InsideOutOn()
clip.Update()
cropdata = clip.GetOutput()
writer = vtk.vtkXMLPolyDataWriter()
writer.SetFileName(filename + '-clip.vtp')
writer.SetInputData(cropdata)
writer.Write()
#Remove temp file
os.remove("temp" + filename + ".vtp")
def getcachedcontour(self, ci, timestep):
#This is only called on qcc or cvo
#cube size should be 256 or 512 for production, using 16 for testing.
cubedimension = 256
fullcubesize = [math.ceil(float(ci.xlen)/float(cubedimension))*cubedimension, math.ceil(float(ci.ylen)/float(cubedimension))*cubedimension, math.ceil(float(ci.zlen)/float(cubedimension))*cubedimension]
#print ("Full poly mesh cube size is: ", fullcubesize)
#The corner of the cube must be a multiple of the cubedimension.
corner = [ci.xstart-ci.xstart%cubedimension, ci.ystart-ci.xstart%cubedimension, ci.zstart-ci.xstart%cubedimension]
cubesize = [cubedimension, cubedimension, cubedimension]
#We will try to get cached data, or we will use getvtkdata if we miss. vtkdata does the overlap, so we don't worry about it here.
start = time.time()
cornermap = []
fullcube = vtk.vtkAppendPolyData()
args = []
cubecount = 0
for xcorner in range (ci.xstart-ci.xstart%cubedimension,ci.xstart + ci.xlen, cubedimension):
for ycorner in range (ci.ystart-ci.ystart%cubedimension,ci.ystart + ci.ylen, cubedimension):
for zcorner in range (ci.zstart-ci.zstart%cubedimension,ci.zstart + ci.zlen, cubedimension):
#cornermap.append([xcorner, ycorner, zcorner])
cubecount = cubecount+1
args.append([xcorner, ycorner, zcorner, ci, cubedimension,timestep])
#output = self.buildcube(corners, ci, cubedimension, timestep)
#fullcube.AddInputConnection(output.GetOutputPort())
#Create a process pool for each cube
#print ("Numcubes: ", cubecount)
if (cubecount > 8):
cubecount = 8 #limit to only 8 processes
p = Pool(cubecount)
#print("Pool created..mapping args", args)
#connection.close()
cubelist = p.map(self.buildcube, args)
#p.join() #wait for processes to finish
for filename in cubelist:
r = vtk.vtkXMLPolyDataReader()
r.SetFileName(filename)
#r.Update()
fullcube.AddInputConnection(r.GetOutputPort())
#print("Added:", filename)
connection.close()
#cleanup processes
#p = None
p.close() #free up the ram
#cubelist = None
end = time.time()
comptime = end-start
print("Final Computation time: " + str(comptime) + "s")
print("Done processing.")
xspacing = Dataset.objects.get(dbname_text=ci.dataset).xspacing
yspacing = Dataset.objects.get(dbname_text=ci.dataset).yspacing
zspacing = Dataset.objects.get(dbname_text=ci.dataset).zspacing
box = vtk.vtkBox()
box.SetBounds(ci.xstart*xspacing, (ci.xstart+ci.xlen-1)*xspacing, ci.ystart*yspacing, (ci.ystart+ci.ylen-1)*yspacing, ci.zstart*zspacing, (ci.zstart + ci.zlen-1)*zspacing)
fullcube.Update()
clip = vtk.vtkClipPolyData()
clip.SetClipFunction(box)
clip.GenerateClippedOutputOn()
fco = fullcube.GetOutput()
fco.GetPointData().SetScalars(fco.GetPointData().GetArray("Velocity"))
clip.SetInputData(fco)
clip.InsideOutOn()
clip.Update()
#print clip.GetOutput()
#print("Cleaning cube (removing duplicate points)")
clean = vtk.vtkCleanPolyData()
clean.SetInputConnection(clip.GetOutputPort())
clean.Update()
#Try to cleanup!
clip = None
fullcube = None
box = None
return clean.GetOutput()
