def __init__(self):
GPIOPort.__init__(self, 54)
self.export = range(54)
self.post_value = True
self.post_function = True
self.gpio_setup = []
self.gpio_reset = []
def __init__(self):
GPIOPort.__init__(self, 54)
self.export = range(54)
self.post_value = True
self.post_function = True
self.gpio_setup = []
self.gpio_reset = []
def __init__(self, slave=0x60, prescale0=0, prescale1=0, ledmode=0b1110):
# Check parameter sanity
pres0 = toint(prescale0)
if not pres0 in range(0, 0xFF + 1):
raise ValueError("prescale0 value %d out of range [%d..%d]" %
(pres0, 0x00, 0xFF))
pres1 = toint(prescale1)
if not pres1 in range(0, 0xFF + 1):
raise ValueError("prescale1 value %d out of range [%d..%d]" %
(pres1, 0x00, 0xFF))
lmode = toint(ledmode)
if not lmode in range(0, 0x0F + 1):
raise ValueError("ledmode value %d out of range [%d..%d]" %
(lmode, 0x00, 0x0F))
# Go for it
I2C.__init__(self, toint(slave))
PWM.__init__(self, self.PWM_CHANNELS, self.PWM_RESOLUTION,
self.__calculateFrequency__(pres0))
DAC.__init__(self, self.DAC_CHANNELS, self.DAC_RESOLUTION, self.VREF)
GPIOPort.__init__(self, self.GPIO_CHANNELS, self.GPIO_BANKS)
d = bytearray(5)
d[0] = pres0
d[1] = self.D_PWM0
d[2] = pres1
d[3] = self.D_PWM1
d[4] = lmode | 0xF0
self.writeRegisters((self.PSC0 | self.FLAG_AI), d)
def __init__(self): #TODO Change the count to match exact count (not NEEDED currently) GPIOPort.__init__(self, 33) #TODO Get those values back from config file (not NEEDED currently) self.post_value = True self.post_function = True #card lists self.cards = []
def __init__(self, slave=0x20):
slave = toint(slave)
if slave in range(0x20, 0x28):
name = "PCF8574"
elif slave in range(0x38, 0x40):
name = "PCF8574A"
else:
raise ValueError("Bad slave address for PCF8574(A) : 0x%02X not in range [0x20..0x27, 0x38..0x3F]" % slave)
I2C.__init__(self, slave, name)
GPIOPort.__init__(self, 8)
self.portWrite(0xFF)
self.portRead()
def __init__(self, slave=0x20, invert_oe=False, outconf=0xFF):
# Check parameter sanity
oconf = toint(outconf)
if oconf != 0xFF:
if not oconf in range(0, 0xFF):
raise ValueError("outconf value %d out of range [%d..%d]" %
(oconf, 0x00, 0xFE))
# Go for it
I2C.__init__(self, toint(slave))
GPIOPort.__init__(self, self.CHANNELS, self.BANKS)
iv_oe = str2bool(invert_oe)
if iv_oe:
self.writeRegister(self.MODE,
(self.VAL_MODEDEF | self.FLAG_OEPOLHI))
else:
self.writeRegister(self.MODE, self.VAL_MODEDEF)
self.writeRegister(self.OUTCONF, oconf)
self.reset()
def __init__(self, slave=None):
OneWire.__init__(self, slave, 0x29, "2408", "DS2408")
GPIOPort.__init__(self, 8)
self.portWrite(0x00)
def __init__(self, channelCount):
GPIOPort.__init__(self, channelCount)
self.banks = int(channelCount / 8)
def __init__(self, channelCount):
GPIOPort.__init__(self, channelCount)
self.banks = int(channelCount / 8)
def __init__(self, slave=None):
OneWire.__init__(self, slave, 0x29, "2408")
GPIOPort.__init__(self, 8)
self.portWrite(0x00)
def __init__(self):
GPIOPort.__init__(self, 54)
self.export = range(54)
self.post_value = True
self.post_function = True
def __init__(self, slave=None, family=0x29, extra="2408", channelCount=8):
OneWire.__init__(self, slave, family, extra)
GPIOPort.__init__(self, channelCount)
self. __resetFunctions__()
self.__portWrite__(0xFF) # Turn off output transistors to allow reading
def __init__(self):
GPIOPort.__init__(self, 54)
self.export = range(54)
self.post_value = True
self.post_function = True
def __family__(self):
return [
PWM.__family__(self),
DAC.__family__(self),
GPIOPort.__family__(self)
]
def __init__(self, slave=0x20):
I2C.__init__(self, toint(slave))
GPIOPort.__init__(self, self.CHANNELS)
self.reset()
