def test_send_when_not_open_must_fail(self):
'''
Test that sending a command when the device is not open will fail.
'''
mock_monitor = mock()
mock_device = mock()
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
logger=self._logger)
when(mock_device).is_open().thenReturn(False)
self.assertFalse(controller.send('foo'))
verify(mock_device, times=0).send(any(), any())
def test_start_and_stop(self):
'''
Basic start and stop test.
'''
mock_monitor = mock()
mock_device = mock()
when(mock_device).get_vendor_id().thenReturn(0)
when(mock_device).get_product_id().thenReturn(0)
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
logger=self._logger)
controller.start()
self.assertTrue(controller.running)
controller.stop()
self.assertFalse(controller.running)
def test_send_recv_must_fail(self):
'''
Generate an IOError on receive.
'''
mock_monitor = mock()
mock_device = mock()
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
logger=self._logger)
when(mock_device).is_open().thenReturn(True)
when(mock_device).receive().thenRaise(IOError())
when(mock_device).get_packet_size().thenReturn(64)
self.assertFalse(controller.send('foo'))
verify(mock_device, times=1).send(any())
verify(mock_device, times=1).receive()
def test_send_command_understood(self):
'''
Test that the device understood the command.
'''
mock_monitor = mock()
mock_device = mock()
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
logger=self._logger)
when(mock_device).is_open().thenReturn(True)
data = 'ack' + '\0' * (64 - len('ack'))
when(mock_device).receive().thenReturn(data)
when(mock_device).get_packet_size().thenReturn(64)
self.assertTrue(controller.send('foo'))
verify(mock_device, times=1).send(any())
verify(mock_device, times=1).receive()
def test_start_with_device_disconnected(self):
'''
Test that the add event does not get invoked on start-up.
'''
event = Event()
event.clear()
def _add_handler():
self._logger.debug('Invoked')
event.set()
mock_monitor = MockDeviceMonitor(dormant=True)
mock_device = mock()
when(mock_device).get_vendor_id().thenReturn(0)
when(mock_device).get_product_id().thenReturn(0)
when(mock_device).is_open().thenReturn(False)
# Execute
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
add_event_handler=_add_handler,
logger=self._logger)
controller.start()
self.assertTrue(controller.running)
event.wait(0.1)
controller.stop()
self.assertFalse(controller.running)
# The event must not have been raised
self.assertFalse(event.is_set(), 'Add handler must not be invoked')
# Verify mocks
inorder.verify(mock_device, times=1).get_vendor_id()
inorder.verify(mock_device, times=1).get_product_id()
inorder.verify(mock_device, times=1).open()
# Once on start-up and once on shutdown
# But, it seems mockito needs it to be verified twice, otherwise
# the verify.close will fail.
inorder.verify(mock_device, times=2).is_open()
inorder.verify(mock_device, times=2).is_open()
inorder.verify(mock_device, times=0).close()
def test_without_handlers_must_still_open_and_close_device(self):
'''
Test that, without handlers, the device gets opened and closed.
'''
# Setup
mock_monitor = MockDeviceMonitor(dormant=True)
mock_device = mock()
when(mock_device).get_vendor_id().thenReturn(0)
when(mock_device).get_product_id().thenReturn(0)
when(mock_device).is_open().thenReturn(True)
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
logger=self._logger)
# Execute
controller.start()
self.assertTrue(controller.running)
controller.stop()
self.assertFalse(controller.running)
# Verify mocks
verify(mock_device, times=1).open()
verify(mock_device, times=1).close()
def test_stop_and_stop_again(self):
'''
Trying to stop twice must not fail.
'''
mock_device = mock()
when(mock_device).get_vendor_id().thenReturn(0)
when(mock_device).get_product_id().thenReturn(0)
when(mock_device).is_opened().thenReturn(True)
mock_monitor = mock()
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
logger=self._logger)
controller.start()
self.assertTrue(controller.running)
controller.stop()
self.assertFalse(controller.running)
controller.stop()
self.assertFalse(controller.running)
def test_manually_with_different_device_modules_and_managers(self):
'''
Manual testing: Blink all lights a few times. You must be able to
connect and disconnect the device while executing. It doesn't really
matter whether the device is initially connected or disconnected.
'''
# Overriding the default log level so that the instructions are clear
# and not obfuscated by the many debug messages.
self._logger.setLevel('INFO')
# You must enable only one of these
use_module = 'pyusb'
#use_module = 'teensyrawhid'
# And one of these
use_monitor = 'pyudev'
#use_monitor = 'polling_device_manager'
# Basics
vendor_id = 0x16c0
product_id = 0x0486
add_timeout_message = 'The add event must have been invoked'
remove_timeout_message = 'The remove event must have been invoked'
iterations = 3
event_delay = 30
blink_delay = 0.5
running = False
# Trick to get past the closure: The pointer of the states dictionary
# can't changed, but its data can. :-)
states = {'paused': True}
# Select the module to test
if use_module == 'pyusb':
interface_number = 1
device = whatsthatlight.devices.PyUsbDevice(vendor_id,
product_id,
interface_number)
elif use_module == 'teensyrawhid':
usage_page = 0xffc9
usage = 0x0004
device = whatsthatlight.devices.TeensyDevice(vendor_id,
product_id,
usage_page,
usage)
else:
raise Exception('Invalid USB device module specified')
# Select the device manager to test
if use_monitor == 'pyudev':
monitor = PyUdevDeviceMonitor(vendor_id,
product_id,
pyudev,
logger=self._logger)
elif use_monitor == 'polling':
monitor = None
else:
raise Exception('Invalid device manager specified')
# Execution controllers
add_event = Event()
remove_event = Event()
paused_event = Event()
add_event.clear()
remove_event.clear()
paused_event.clear()
# Handlers and helpers
def _add_handler():
states['paused'] = False
paused_event.set()
add_event.set()
self._logger.debug('Invoked')
def _remove_handler():
paused_event.clear()
states['paused'] = True
remove_event.set()
self._logger.debug('Invoked')
def _run():
self._logger.debug('Entering run loop')
toggle = True
while running:
if states['paused']:
self._logger.debug('Pausing run loop')
paused_event.wait(event_delay)
self._logger.debug('Resuming run loop')
# No point asserting sent data if the device gets
# disconnected while communicating with it -- it's
# likely to fail.
if toggle:
success = (controller.send('red=on\n') and
controller.send('green=on\n') and
controller.send('yellow=on\n'))
self._logger.debug('All on: {0}'.format(success))
else:
success = (controller.send('red=off\n') and
controller.send('green=off\n') and
controller.send('yellow=off\n'))
self._logger.debug('All off: {0}'.format(success))
toggle = not toggle
sleep(blink_delay)
self._logger.debug('Exiting run loop')
# Setup
thread = Thread(target=_run)
controller = DeviceController(device,
usb_transfer_types.RAW,
monitor,
add_event_handler=_add_handler,
remove_event_handler=_remove_handler,
logger=self._logger)
# Start everything
controller.start()
self.assertTrue(controller.running)
running = True
thread.start()
# Ensure a clean shutdown as to not hang the test unnecessarily
try:
i = 0
while i < iterations:
# Wait until device connected
self._logger.info('Waiting for device to be connected')
add_event.wait(event_delay)
self.assert_(add_event.is_set(), add_timeout_message)
add_event.clear()
# Wait until device disconnected
self._logger.info('Waiting for device to be disconnected')
remove_event.wait(event_delay)
self.assert_(remove_event.is_set(), remove_timeout_message)
remove_event.clear()
# Next iteration
i += 1
except AssertionError:
raise
finally:
# Stop everything
running = False
thread.join()
controller.stop()
self.assertFalse(controller.running)
def test_add_remove_handler_must_be_invoked(self):
'''
Test that the add and remove handlers get invoked.
'''
# Basics
vendor_id_str = '0a1b'
vendor_id = int(vendor_id_str, 16)
product_id_str = '2c3d'
product_id = int(product_id_str, 16)
# Execution controllers
add_event = Event()
remove_event = Event()
add_event.clear()
remove_event.clear()
# Event handlers
def _add_handler():
self._logger.debug('Invoked')
add_event.set()
def _remove_handler():
self._logger.debug('Invoked')
remove_event.set()
mock_device = mock()
when(mock_device).get_vendor_id().thenReturn(vendor_id)
when(mock_device).get_product_id().thenReturn(product_id)
# pyudev provide the values as hex strings, without the 0x prefix
mock_pyudev.vendor_id = vendor_id_str
mock_pyudev.model_id = product_id_str
mock_pyudev.dormant = False
mock_pyudev.delay = 0.1
wait_delay = mock_pyudev.delay * 2
# This VID and PID must match the above
mock_monitor = PyUdevDeviceMonitor(vendor_id,
product_id,
udev_module=mock_pyudev,
logger=self._logger)
controller = DeviceController(mock_device,
usb_transfer_types.RAW,
mock_monitor,
add_event_handler=_add_handler,
remove_event_handler=_remove_handler,
logger=self._logger)
controller.start()
self.assertTrue(controller.running)
# Wait for the handlers to be invoked
add_event.wait(wait_delay)
remove_event.wait(wait_delay)
# Shut down
controller.stop()
self.assertFalse(controller.running)
# Test after stopping so that we don't hang the test if an
# assertion failed
self.assertTrue(add_event.is_set(),
'Add handler must not be invoked')
self.assertTrue(remove_event.is_set(),
'Remove handler must not be invoked')
verify(mock_device, times=2).open()
verify(mock_device, times=1).close()