def do_install_disk(cls, disk, disk_name, image_creator, workdir, oe_builddir,
                        bootimg_dir, kernel_dir, native_sysroot):
        """
        Assemble partitions to disk image

        Called after all partitions have been prepared and assembled into a
        disk image. In this case, we install the MBR.
        """
        mbrfile = os.path.join(native_sysroot, "usr/share/syslinux/")
        if image_creator.ptable_format == 'msdos':
            mbrfile += "mbr.bin"
        elif image_creator.ptable_format == 'gpt':
            mbrfile += "gptmbr.bin"
        else:
            msger.error("Unsupported partition table: %s" % \
                        image_creator.ptable_format)

        if not os.path.exists(mbrfile):
            msger.error("Couldn't find %s. Has syslinux-native been baked?" % mbrfile)

        full_path = disk['disk'].device
        msger.debug("Installing MBR on disk %s as %s with size %s bytes" \
                    % (disk_name, full_path, disk['min_size']))

        ret_code = runner.show(['dd', 'if=%s' % mbrfile, 'of=%s' % full_path, 'conv=notrunc'])
        if ret_code != 0:
            raise ImageError("Unable to set MBR to %s" % full_path)
Example #2
0
    def do_install_disk(cls, disk, disk_name, creator, workdir, oe_builddir,
                        bootimg_dir, kernel_dir, native_sysroot):
        """
        Called after all partitions have been prepared and assembled into a
        disk image.  In this case, we install the MBR.
        """
        mbrfile = "%s/syslinux/" % bootimg_dir
        if creator.ptable_format == 'msdos':
            mbrfile += "mbr.bin"
        elif creator.ptable_format == 'gpt':
            mbrfile += "gptmbr.bin"
        else:
            raise WicError("Unsupported partition table: %s" %
                           creator.ptable_format)

        if not os.path.exists(mbrfile):
            raise WicError(
                "Couldn't find %s.  If using the -e option, do you "
                "have the right MACHINE set in local.conf?  If not, "
                "is the bootimg_dir path correct?" % mbrfile)

        full_path = creator._full_path(workdir, disk_name, "direct")
        logger.debug("Installing MBR on disk %s as %s with size %s bytes",
                     disk_name, full_path, disk.min_size)

        rcode = runner.show(
            ['dd',
             'if=%s' % mbrfile,
             'of=%s' % full_path, 'conv=notrunc'])
        if rcode != 0:
            raise WicError("Unable to set MBR to %s" % full_path)
    def do_install_disk(cls, disk, disk_name, creator, workdir, oe_builddir,
                        bootimg_dir, kernel_dir, native_sysroot):
        """
        Called after all partitions have been prepared and assembled into a
        disk image.  In this case, we install the MBR.
        """
        mbrfile = "%s/syslinux/" % bootimg_dir
        if creator.ptable_format == 'msdos':
            mbrfile += "mbr.bin"
        elif creator.ptable_format == 'gpt':
            mbrfile += "gptmbr.bin"
        else:
            msger.error("Unsupported partition table: %s" % creator.ptable_format)

        if not os.path.exists(mbrfile):
            msger.error("Couldn't find %s.  If using the -e option, do you "
                        "have the right MACHINE set in local.conf?  If not, "
                        "is the bootimg_dir path correct?" % mbrfile)

        full_path = creator._full_path(workdir, disk_name, "direct")
        msger.debug("Installing MBR on disk %s as %s with size %s bytes" \
                    % (disk_name, full_path, disk['min_size']))

        rcode = runner.show(['dd', 'if=%s' % mbrfile,
                             'of=%s' % full_path, 'conv=notrunc'])
        if rcode != 0:
            raise ImageError("Unable to set MBR to %s" % full_path)
Example #4
0
    def do_install_disk(self, disk, disk_name, cr, workdir, oe_builddir,
                        bootimg_dir, kernel_dir, native_sysroot):
        """
        Called after all partitions have been prepared and assembled into a
        disk image.  In this case, we install the MBR.
        """
        mbrfile = "%s/syslinux/" % bootimg_dir
        if cr._ptable_format == 'msdos':
            mbrfile += "mbr.bin"

        if not os.path.exists(mbrfile):
            msger.error(
                "Couldn't find %s.  If using the -e option, do you have the right MACHINE set in local.conf?  If not, is the bootimg_dir path correct?"
                % mbrfile)

        full_path = cr._full_path(workdir, disk_name, "direct")
        msger.debug("Installing MBR on disk %s as %s with size %s bytes" \
                    % (disk_name, full_path, disk['min_size']))

        rc = runner.show(
            ['dd',
             'if=%s' % mbrfile,
             'of=%s' % full_path, 'conv=notrunc'])
        if rc != 0:
            raise ImageError("Unable to set MBR to %s" % full_path)
Example #5
0
    def do_install_disk(cls, disk, disk_name, image_creator, workdir,
                        oe_builddir, bootimg_dir, kernel_dir, native_sysroot):
        """
        Assemble partitions to disk image

        Called after all partitions have been prepared and assembled into a
        disk image. In this case, we install the MBR.
        """
        mbrfile = os.path.join(native_sysroot, "usr/share/syslinux/")
        if image_creator.ptable_format == 'msdos':
            mbrfile += "mbr.bin"
        elif image_creator.ptable_format == 'gpt':
            mbrfile += "gptmbr.bin"
        else:
            msger.error("Unsupported partition table: %s" % \
                        image_creator.ptable_format)

        if not os.path.exists(mbrfile):
            msger.error("Couldn't find %s. Has syslinux-native been baked?" %
                        mbrfile)

        full_path = disk['disk'].device
        msger.debug("Installing MBR on disk %s as %s with size %s bytes" \
                    % (disk_name, full_path, disk['min_size']))

        ret_code = runner.show(
            ['dd',
             'if=%s' % mbrfile,
             'of=%s' % full_path, 'conv=notrunc'])
        if ret_code != 0:
            raise ImageError("Unable to set MBR to %s" % full_path)
    def do_install_disk(self, disk, disk_name, cr, workdir, oe_builddir, bootimg_dir, kernel_dir, native_sysroot):
        """
        Called after all partitions have been prepared and assembled into a
        disk image.  In this case, we install the MBR.
        """
        mbrfile = "%s/syslinux/" % bootimg_dir
        if cr._ptable_format == "msdos":
            mbrfile += "mbr.bin"

        if not os.path.exists(mbrfile):
            msger.error(
                "Couldn't find %s.  If using the -e option, do you have the right MACHINE set in local.conf?  If not, is the bootimg_dir path correct?"
                % mbrfile
            )

        full_path = cr._full_path(workdir, disk_name, "direct")
        msger.debug("Installing MBR on disk %s as %s with size %s bytes" % (disk_name, full_path, disk["min_size"]))

        rc = runner.show(["dd", "if=%s" % mbrfile, "of=%s" % full_path, "conv=notrunc"])
        if rc != 0:
            raise ImageError("Unable to set MBR to %s" % full_path)
Example #7
0
    def __clean_tmpdir(self):
        if not self.enabletmpfs:
            return

        runner.show('umount -l %s' % self.workdir)
Example #8
0
    def __setup_tmpdir(self):
        if not self.enabletmpfs:
            return

        runner.show('mount -t tmpfs -o size=4G tmpfs %s' % self.workdir)
Example #9
0
    def __clean_tmpdir(self):
        if not self.enabletmpfs:
            return

        runner.show('umount -l %s' % self.workdir)
Example #10
0
    def __setup_tmpdir(self):
        if not self.enabletmpfs:
            return

        runner.show('mount -t tmpfs -o size=4G tmpfs %s' % self.workdir)