def run_FAST(self, fst_vt, case_list, case_name_list, channels):
# FAST wrapper setup
fastBatch = runFAST_pywrapper_batch(FAST_ver=self.FAST_ver)
fastBatch.FAST_exe = self.FAST_exe
fastBatch.FAST_runDirectory = self.FAST_runDirectory
fastBatch.FAST_InputFile = self.FAST_InputFile
fastBatch.FAST_directory = self.FAST_directory
fastBatch.debug_level = self.debug_level
fastBatch.dev_branch = self.dev_branch
fastBatch.fst_vt = fst_vt
fastBatch.post = return_timeseries
fastBatch.case_list = case_list
fastBatch.case_name_list = case_name_list
fastBatch.channels = channels
# Run FAST
if self.mpi_run:
FAST_Output = fastBatch.run_mpi(self.mpi_comm_map_down)
else:
if self.cores == 1:
FAST_Output = fastBatch.run_serial()
else:
FAST_Output = fastBatch.run_multi(self.cores)
self.fst_vt = fst_vt
return FAST_Output
case_inputs[("AeroDyn15", "AFAeroMod")] = {'vals': [2], 'group': 0}
case_inputs[("AeroDyn15", "TwrPotent")] = {'vals': [0], 'group': 0}
case_inputs[("AeroDyn15", "TwrShadow")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "TwrAero")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "SkewMod")] = {'vals': [2], 'group': 0}
case_inputs[("AeroDyn15", "TipLoss")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "HubLoss")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "TanInd")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "AIDrag")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "TIDrag")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "UseBlCm")] = {'vals': ['True'], 'group': 0}
case_list, case_name_list = iec.execute(case_inputs=case_inputs)
# Run FAST cases
fastBatch = runFAST_pywrapper_batch(FAST_ver='OpenFAST', dev_branch=True)
if eagle:
fastBatch.FAST_exe = '/home/pbortolo/openfast/build/glue-codes/openfast/openfast' # Path to executable
fastBatch.FAST_InputFile = 'OpenFAST_BAR_01.fst' # FAST input file (ext=.fst)
fastBatch.FAST_directory = '/home/pbortolo/wisdem_1_0_0/BAR/OpenFAST_Models/BAR_01' # Path to fst directory files
else:
fastBatch.FAST_exe = '/Users/pbortolo/work/2_openfast/openfast/build/glue-codes/openfast/openfast' # Path to executable
fastBatch.FAST_InputFile = 'OpenFAST_BAR_00.fst' # FAST input file (ext=.fst)
fastBatch.FAST_directory = '/Users/pbortolo/work/2_openfast/BAR/OpenFAST_Models/BAR_00' # Path to fst directory files
fastBatch.FAST_runDirectory = iec.run_dir
fastBatch.case_list = case_list
fastBatch.case_name_list = case_name_list
fastBatch.debug_level = 2
if eagle:
fastBatch.run_multi(36)
def generate_rotperf_fast(self, openfast_path, FAST_runDirectory=None, run_BeamDyn=False,
debug_level=1, run_type='multi'):
'''
Use openfast to generate Cp surface data. Will be slow, especially if using BeamDyn,
but may be necessary if cc-blade is not sufficient.
Parameters:
-----------
openfast_path: str
path to openfast
FAST_runDirectory: str
directory to run openfast simulations in
run_BeamDyn: bool
Flag to run beamdyn - does not exist yet
debug_level: float
0 - no outputs, 1 - simple outputs, 2 - all outputs
run_type: str
'serial' - run in serial, 'multi' - run using python multiprocessing tools,
'mpi' - run using mpi tools
'''
# Load additional WISDEM tools
from wisdem.aeroelasticse import runFAST_pywrapper, CaseGen_General
from wisdem.aeroelasticse.Util import FileTools
# Load pCrunch tools
from pCrunch import pdTools, Processing
# setup values for surface
v0 = self.v_rated + 2
TSR_initial = np.arange(3, 15,1)
pitch_initial = np.arange(-1,25,1)
rotspeed_initial = TSR_initial*v0/self.rotor_radius * RadSec2rpm # rpms
# Specify Case Inputs
case_inputs = {}
# ------- Setup OpenFAST inputs --------
case_inputs[('Fst','TMax')] = {'vals': [330], 'group': 0}
case_inputs[('Fst','Compinflow')] = {'vals': [1], 'group': 0}
case_inputs[('Fst','CompAero')] = {'vals': [2], 'group': 0}
case_inputs[('Fst','CompServo')] = {'vals': [1], 'group': 0}
case_inputs[('Fst','CompHydro')] = {'vals': [0], 'group': 0}
if run_BeamDyn:
case_inputs[('Fst','CompElast')] = {'vals': [2], 'group': 0}
else:
case_inputs[('Fst','CompElast')] = {'vals': [1], 'group': 0}
case_inputs[('Fst', 'OutFileFmt')] = {'vals': [2], 'group': 0}
# AeroDyn15
case_inputs[('AeroDyn15', 'WakeMod')] = {'vals': [1], 'group': 0}
case_inputs[('AeroDyn15', 'AfAeroMod')] = {'vals': [1], 'group': 0}
case_inputs[('AeroDyn15', 'TwrPotent')] = {'vals': [0], 'group': 0}
# ElastoDyn
case_inputs[('ElastoDyn', 'FlapDOF1')] = {'vals': ['True'], 'group': 0}
case_inputs[('ElastoDyn', 'FlapDOF2')] = {'vals': ['True'], 'group': 0}
case_inputs[('ElastoDyn', 'EdgeDOF')] = {'vals': ['True'], 'group': 0}
case_inputs[('ElastoDyn', 'TeetDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'DrTrDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'GenDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'YawDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'TwFADOF1')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'TwFADOF2')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'TwSSDOF1')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'TwSSDOF2')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'PtfmSgDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'PtfmSwDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'PtfmHvDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'PtfmRDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'PtfmPDOF')] = {'vals': ['False'], 'group': 0}
case_inputs[('ElastoDyn', 'PtfmYDOF')] = {'vals': ['False'], 'group': 0}
# BeamDyn
# NEEDED
# InflowWind
case_inputs[('InflowWind', 'WindType')] = {'vals': [1], 'group': 0}
case_inputs[('InflowWind', 'HWindSpeed')] = {'vals': [v0], 'group': 0}
case_inputs[('InflowWind', 'PLexp')] = {'vals': [0], 'group': 0}
# ServoDyn
case_inputs[('ServoDyn', 'PCMode')] = {'vals': [0], 'group': 0}
case_inputs[('ServoDyn', 'VSContrl')] = {'vals': [0], 'group': 0}
case_inputs[('ServoDyn', 'HSSBrMode')] = {'vals': [0], 'group': 0}
case_inputs[('ServoDyn', 'YCMode')] = {'vals': [0], 'group': 0}
# ------- Setup sweep values inputs --------
case_inputs[('ElastoDyn', 'BlPitch1')] = {'vals': list(pitch_initial), 'group': 1}
case_inputs[('ElastoDyn', 'BlPitch2')] = {'vals': list(pitch_initial), 'group': 1}
case_inputs[('ElastoDyn', 'BlPitch3')] = {'vals': list(pitch_initial), 'group': 1}
case_inputs[('ElastoDyn', 'RotSpeed')] = {'vals': list(rotspeed_initial), 'group': 2}
# FAST details
fastBatch = runFAST_pywrapper.runFAST_pywrapper_batch(FAST_ver='OpenFAST', dev_branch=True)
fastBatch.FAST_exe = openfast_path # Path to executable
fastBatch.FAST_InputFile = self.fast.FAST_InputFile
fastBatch.FAST_directory = self.fast.FAST_directory
if not FAST_runDirectory:
FAST_runDirectory = os.path.join(os.getcwd(), 'RotPerf_OpenFAST')
fastBatch.FAST_runDirectory = FAST_runDirectory
fastBatch.debug_level = debug_level
# Generate cases
case_name_base = self.TurbineName + '_rotperf'
case_list, case_name_list = CaseGen_General.CaseGen_General(
case_inputs, dir_matrix=fastBatch.FAST_runDirectory, namebase=case_name_base)
fastBatch.case_list = case_list
fastBatch.case_name_list = case_name_list
# Make sure proper outputs exist
var_out = [
# ElastoDyn (this is probably overkill on the outputs)
"BldPitch1", "BldPitch2", "BldPitch3", "Azimuth", "RotSpeed", "GenSpeed", "NacYaw",
"OoPDefl1", "IPDefl1", "TwstDefl1", "OoPDefl2", "IPDefl2", "TwstDefl2", "OoPDefl3",
"IPDefl3", "TwstDefl3", "RootFxc1",
"RootFyc1", "RootFzc1", "RootMxc1", "RootMyc1", "RootMzc1", "RootFxc2", "RootFyc2",
"RootFzc2", "RootMxc2", "RootMyc2", "RootMzc2", "RootFxc3", "RootFyc3", "RootFzc3",
"RootMxc3", "RootMyc3", "RootMzc3", "Spn1MLxb1", "Spn1MLyb1", "Spn1MLzb1", "Spn1MLxb2",
"Spn1MLyb2", "Spn1MLzb2", "Spn1MLxb3", "Spn1MLyb3", "Spn1MLzb3", "RotThrust", "LSSGagFya",
"LSSGagFza", "RotTorq", "LSSGagMya", "LSSGagMza",
# ServoDyn
"GenPwr", "GenTq",
# AeroDyn15
"RtArea", "RtVAvgxh", "B1N3Clrnc", "B2N3Clrnc", "B3N3Clrnc",
"RtAeroCp", 'RtAeroCq', 'RtAeroCt', 'RtTSR', # NECESSARY
# InflowWind
"Wind1VelX",
]
channels = {}
for var in var_out:
channels[var] = True
fastBatch.channels = channels
# Run OpenFAST
if run_type.lower() == 'multi':
fastBatch.run_multi()
elif run_type.lower()=='mpi':
fastBatch.run_mpi()
elif run_type.lower()=='serial':
fastBatch.run_serial()
# ========== Post Processing ==========
# Save statistics
fp = Processing.FAST_Processing()
# Find all outfiles
fname_case_matrix = os.path.join(FAST_runDirectory, 'case_matrix.yaml')
case_matrix = FileTools.load_yaml(fname_case_matrix, package=1)
cm = pd.DataFrame(case_matrix)
# Parse case matrix and find outfiles names
outfiles = []
case_names = cm['Case_Name']
outfiles = []
for name in case_names:
outfiles.append(os.path.join(FAST_runDirectory, name + '.outb'))
# Set some processing parameters
fp.OpenFAST_outfile_list = outfiles
fp.namebase = case_name_base
fp.t0 = 270
fp.parallel_analysis = True
fp.results_dir = os.path.join(FAST_runDirectory,'stats')
fp.verbose = True
# Save for debug!
fp.save_LoadRanking = False
fp.save_SummaryStats = False
print('Processing openfast data on {} cores.'.format(fp.parallel_cores))
# Load and save statistics and load rankings
stats, load_rankings = fp.batch_processing()
# Get means of last 30 seconds of 300 second simulation
CP = stats[0]['RtAeroCp']['mean']
CT = stats[0]['RtAeroCt']['mean']
CQ = stats[0]['RtAeroCq']['mean']
# Reshape Cp, Ct and Cq
Cp = np.transpose(np.reshape(CP, (len(pitch_initial), len(TSR_initial))))
Ct = np.transpose(np.reshape(CT, (len(pitch_initial), len(TSR_initial))))
Cq = np.transpose(np.reshape(CQ, (len(pitch_initial), len(TSR_initial))))
# Store necessary metrics for analysis
self.pitch_initial_rad = pitch_initial * deg2rad
self.TSR_initial = TSR_initial
self.Cp_table = Cp
self.Ct_table = Ct
self.Cq_table = Cq
def runFAST_CaseGenIEC(init_cond, offshore=False):
####
#TMax = 720.
#TStart = 120.
#T_trans = 320.
TMax = 840.
TStart = 240.
T_trans = 540.
####
iec = CaseGen_IEC()
# Turbine Data
iec.init_cond = {} # can leave as {} if data not available
iec.init_cond[("ElastoDyn", "RotSpeed")] = {'U': init_cond['Wind1VelX']}
iec.init_cond[("ElastoDyn", "RotSpeed")]['val'] = init_cond['RotSpeed']
iec.init_cond[("ElastoDyn", "BlPitch1")] = {'U': init_cond['Wind1VelX']}
iec.init_cond[("ElastoDyn", "BlPitch1")]['val'] = init_cond['BldPitch1']
iec.init_cond[("ElastoDyn", "BlPitch2")] = iec.init_cond[("ElastoDyn",
"BlPitch1")]
iec.init_cond[("ElastoDyn", "BlPitch3")] = iec.init_cond[("ElastoDyn",
"BlPitch1")]
if offshore:
iec.init_cond[("HydroDyn", "WaveHs")] = {
'U': [3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 25, 40, 50]
}
iec.init_cond[("HydroDyn", "WaveHs")]['val'] = [
1.101917033, 1.101917033, 1.179052649, 1.315715154, 1.536867124,
1.835816514, 2.187994638, 2.598127096, 3.061304068, 3.617035443,
4.027470219, 4.51580671, 4.51580671, 9.686162473, 11.307125
]
iec.init_cond[("HydroDyn", "WaveTp")] = {
'U': [3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 25, 40, 50]
}
iec.init_cond[("HydroDyn", "WaveTp")]['val'] = [
8.515382435, 8.515382435, 8.310063688, 8.006300889, 7.6514231,
7.440581338, 7.460834063, 7.643300307, 8.046899942, 8.521314105,
8.987021024, 9.451641026, 9.451641026, 16.65396967, 18.50491229
]
iec.init_cond[("HydroDyn", "PtfmSurge")] = {'U': [3., 15., 25.]}
iec.init_cond[("HydroDyn", "PtfmSurge")]['val'] = [4., 15., 10.]
iec.init_cond[("HydroDyn", "PtfmPitch")] = {'U': [3., 15., 25.]}
iec.init_cond[("HydroDyn", "PtfmPitch")]['val'] = [-1., 3., 1.3]
iec.init_cond[("HydroDyn", "PtfmHeave")] = {'U': [3., 25.]}
iec.init_cond[("HydroDyn", "PtfmHeave")]['val'] = [0.5, 0.5]
iec.Turbine_Class = 'I' # I, II, III, IV
iec.Turbulence_Class = 'B'
iec.D = 240.
iec.z_hub = 150.
V_rated = 8.25867815
# DLC inputs
iec.dlc_inputs = {}
#iec.dlc_inputs['DLC'] = [1.1]
#iec.dlc_inputs['U'] = [np.arange(3., 26., 2.)] #
#iec.dlc_inputs['Seeds'] = [range(1,7)]
#iec.dlc_inputs['Yaw'] = [[]]
iec.dlc_inputs['DLC'] = [1.1, 1.3, 1.4, 1.5, 6.1, 6.3]
iec.dlc_inputs['U'] = [
np.arange(3., 26., 2.),
np.arange(3., 26., 2.), [V_rated - 2., V_rated, V_rated + 2.],
np.arange(3., 26., 2.), [], []
] #
iec.dlc_inputs['Seeds'] = [
range(1, 7),
range(1, 7), [], [],
range(1, 7),
range(1, 7)
]
iec.dlc_inputs['Yaw'] = [[], [], [], [], [], []]
#iec.dlc_inputs['DLC'] = [1.1]
#iec.dlc_inputs['U'] = [[13.]] #
#iec.dlc_inputs['Seeds'] = [[1]]
#iec.dlc_inputs['Yaw'] = [[]]
iec.transient_dir_change = 'both' # '+','-','both': sign for transient events in EDC, EWS
iec.transient_shear_orientation = 'both' # 'v','h','both': vertical or horizontal shear for EWS
iec.TMax = TMax # wind file length
iec.TStart = T_trans # start of transcient events (annoying different use of TStart var name)
# Naming, file management, etc
iec.wind_dir = 'run_dir/BAR00_IEC_run2/wind'
iec.case_name_base = 'BAR00_IEC_run2'
iec.Turbsim_exe = "TurbSim"
# iec.Turbsim_exe = "/mnt/c/linux/WT_Codes/TurbSim_v2.00.07a-bjj/TurbSim_glin64"
iec.debug_level = 2
iec.overwrite = False
iec.parallel_windfile_gen = True
iec.cores = 24
iec.run_dir = 'run_dir/BAR00_IEC_run2'
iec.flag_enlarge_grid = True
# Run case generator / wind file writing
case_inputs = {}
# case_inputs[("Fst","TStart")] = {'vals':[0.], 'group':0} # 120
# case_inputs[("Fst","TMax")] = {'vals':[200.], 'group':0} # 720
case_inputs[("Fst", "DT")] = {'vals': [0.01], 'group': 0}
case_inputs[("Fst", "OutFileFmt")] = {'vals': [2], 'group': 0}
case_inputs[("Fst", "TMax")] = {'vals': [TMax], 'group': 0} # 720
case_inputs[("Fst", "TStart")] = {'vals': [TStart], 'group': 0} # 120
if offshore:
# case_inputs[("Fst","DT_Out")] = {'vals':[0.05], 'group':0} # 720
case_inputs[("Fst", "CompHydro")] = {'vals': [1], 'group': 0}
case_inputs[("HydroDyn", "WaveMod")] = {'vals': [2], 'group': 0}
case_inputs[("HydroDyn", "WvDiffQTF")] = {
'vals': ["False"],
'group': 0
}
# case_inputs[("Fst","CompSub")] = {'vals':[1], 'group':0}
case_inputs[("ElastoDyn", "PtfmSgDOF")] = {
'vals': ["True"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmSwDOF")] = {
'vals': ["True"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmHvDOF")] = {
'vals': ["True"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmRDOF")] = {'vals': ["True"], 'group': 0}
case_inputs[("ElastoDyn", "PtfmPDOF")] = {'vals': ["True"], 'group': 0}
case_inputs[("ElastoDyn", "PtfmYDOF")] = {'vals': ["True"], 'group': 0}
else:
case_inputs[("Fst", "CompHydro")] = {'vals': [0], 'group': 0}
case_inputs[("Fst", "CompSub")] = {'vals': [0], 'group': 0}
case_inputs[("ElastoDyn", "PtfmSgDOF")] = {
'vals': ["False"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmSwDOF")] = {
'vals': ["False"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmHvDOF")] = {
'vals': ["False"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmRDOF")] = {
'vals': ["False"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmPDOF")] = {
'vals': ["False"],
'group': 0
}
case_inputs[("ElastoDyn", "PtfmYDOF")] = {
'vals': ["False"],
'group': 0
}
case_inputs[("ElastoDyn", "TwFADOF1")] = {'vals': ["False"], 'group': 0}
case_inputs[("ElastoDyn", "TwFADOF2")] = {'vals': ["False"], 'group': 0}
case_inputs[("ElastoDyn", "TwSSDOF1")] = {'vals': ["False"], 'group': 0}
case_inputs[("ElastoDyn", "TwSSDOF2")] = {'vals': ["False"], 'group': 0}
case_inputs[("ElastoDyn", "FlapDOF1")] = {'vals': ["True"], 'group': 0}
case_inputs[("ElastoDyn", "FlapDOF2")] = {'vals': ["True"], 'group': 0}
case_inputs[("ElastoDyn", "EdgeDOF")] = {'vals': ["True"], 'group': 0}
case_inputs[("ElastoDyn", "DrTrDOF")] = {'vals': ["False"], 'group': 0}
case_inputs[("ElastoDyn", "GenDOF")] = {'vals': ["True"], 'group': 0}
case_inputs[("ElastoDyn", "YawDOF")] = {'vals': ["False"], 'group': 0}
case_inputs[("ServoDyn", "PCMode")] = {'vals': [5], 'group': 0}
case_inputs[("ServoDyn", "VSContrl")] = {'vals': [5], 'group': 0}
case_inputs[("AeroDyn15", "WakeMod")] = {'vals': [1], 'group': 0}
case_inputs[("AeroDyn15", "AFAeroMod")] = {'vals': [2], 'group': 0}
case_inputs[("AeroDyn15", "TwrPotent")] = {'vals': [0], 'group': 0}
case_inputs[("AeroDyn15", "TwrShadow")] = {'vals': ['False'], 'group': 0}
case_inputs[("AeroDyn15", "TwrAero")] = {'vals': ['False'], 'group': 0}
case_inputs[("AeroDyn15", "SkewMod")] = {'vals': [1], 'group': 0}
case_inputs[("AeroDyn15", "TipLoss")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "HubLoss")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "TanInd")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "AIDrag")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "TIDrag")] = {'vals': ['True'], 'group': 0}
case_inputs[("AeroDyn15", "IndToler")] = {'vals': [1.e-5], 'group': 0}
case_inputs[("AeroDyn15", "MaxIter")] = {'vals': [5000], 'group': 0}
case_inputs[("AeroDyn15", "UseBlCm")] = {'vals': ['True'], 'group': 0}
case_list, case_name_list = iec.execute(case_inputs=case_inputs)
# Run FAST cases
fastBatch = runFAST_pywrapper_batch(FAST_ver='OpenFAST', dev_branch=True)
fastBatch.post = return_fname
fastBatch.debug_level = 1
fastBatch.FAST_exe = 'openfast' # Path to executable
fastBatch.FAST_InputFile = 'OpenFAST_BAR_00.fst' # FAST input file (ext=.fst)
fastBatch.FAST_namingOut = 'BAR00_IEC_run2'
# fastBatch.FAST_directory = 'IEA-15-240-RWT/OpenFAST' # Path to fst directory files
fastBatch.FAST_directory = "/projects/windse/egaertne/bar_loads/BAR/OpenFAST_Models/BAR_00/"
fastBatch.FAST_runDirectory = 'run_dir/BAR00_IEC_run2/'
fastBatch.case_list = case_list
fastBatch.case_name_list = case_name_list
fastBatch.debug_level = 2
# Out Channels
var_out = [
"TipDxc1", "TipDyc1", "TipDzc1", "TipDxb1", "TipDyb1", "TipDxc2",
"TipDyc2", "TipDzc2", "TipDxb2", "TipDyb2", "TipDxc3", "TipDyc3",
"TipDzc3", "TipDxb3", "TipDyb3", "RootMxc1", "RootMyc1", "RootMzc1",
"RootMxb1", "RootMyb1", "RootMxc2", "RootMyc2", "RootMzc2", "RootMxb2",
"RootMyb2", "RootMxc3", "RootMyc3", "RootMzc3", "RootMxb3", "RootMyb3",
"TwrBsMxt", "TwrBsMyt", "TwrBsMzt", "GenPwr", "GenTq", "RotThrust",
"RtAeroCp", "RtAeroCt", "RotSpeed", "BldPitch1", "TTDspSS", "TTDspFA",
"NacYaw", "Wind1VelX", "Wind1VelY", "Wind1VelZ", "LSSTipMxa",
"LSSTipMya", "LSSTipMza", "LSSTipMxs", "LSSTipMys", "LSSTipMzs",
"LSShftFys", "LSShftFzs"
]
channels = {}
for var in var_out:
channels[var] = True
fastBatch.channels = channels
#fastBatch.run_serial()
output = fastBatch.run_multi(iec.cores)
# results
outdir = 'results/BAR00_IEC_run2/'
outnaming = "BAR00_IEC_run2" + "_outfile_list.dat"
fname = os.path.join(outdir, outnaming)
if not os.path.isdir(outdir):
os.makedirs(outdir)
output = [os.path.abspath(file) for file in output]
np.savetxt(fname, output, fmt='%s')
shutil.copyfile(
os.path.join(fastBatch.FAST_runDirectory, "case_matrix.txt"),
os.path.join(outdir, "case_matrix.txt"))
