def GetSTB(self):
"""
Returns the value of the internal GPIB status byte register.
"""
stb = wxctb.new_intp()
wxctb.intp_assign(stb, 0)
self.device.Ioctl(wxctb.CTB_GPIB_GETRSP,stb)
return wxctb.intp_value(stb)
def GetSTB(self):
"""
Returns the value of the internal GPIB status byte register.
"""
stb = wxctb.new_intp()
wxctb.intp_assign(stb, 0)
self.device.Ioctl(wxctb.CTB_GPIB_GETRSP, stb)
return wxctb.intp_value(stb)
def GetAvailableBytes(self):
"""
Returns the available bytes in the input queue of the serial
driver.
"""
n = wxctb.new_intp()
wxctb.intp_assign(n, 0)
self.device.Ioctl(wxctb.CTB_SER_GETINQUE,n)
return wxctb.intp_value(n)
def GetAvailableBytes(self):
"""
Returns the available bytes in the input queue of the serial
driver.
"""
n = wxctb.new_intp()
wxctb.intp_assign(n, 0)
self.device.Ioctl(wxctb.CTB_SER_GETINQUE, n)
return wxctb.intp_value(n)
def GetEosMode(self):
"""
Get the internal EOS mode (see SetEosMode).
For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosMode()
"""
mode = wxctb.new_intp()
wxctb.intp_assign(mode, 0)
self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_MODE,mode)
return wxctb.intp_value(mode)
def GetEosChar(self):
"""
Get the internal EOS termination character (see SetEosChar).
For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosChar()
"""
eos = wxctb.new_intp()
wxctb.intp_assign(eos, 0)
self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_CHAR,eos)
return wxctb.intp_value(eos)
def GetEosMode(self):
"""
Get the internal EOS mode (see SetEosMode).
For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosMode()
"""
mode = wxctb.new_intp()
wxctb.intp_assign(mode, 0)
self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_MODE, mode)
return wxctb.intp_value(mode)
def GetEosChar(self):
"""
Get the internal EOS termination character (see SetEosChar).
For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosChar()
"""
eos = wxctb.new_intp()
wxctb.intp_assign(eos, 0)
self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_CHAR, eos)
return wxctb.intp_value(eos)
def SetEosMode(self,mode):
"""
Set the EOS mode (handling).m_eosMode may be a combination
of bits ORed together. The following bits can be used:
0x04: Terminate read when EOS is detected.
0x08: Set EOI (End or identify line) with EOS on write function
0x10: Compare all 8 bits of EOS byte rather than low 7 bits
(all read and write functions). For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosMode(0x04 | 0x08)
"""
intp = wxctb.new_intp()
wxctb.intp_assign(intp, mode)
return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_MODE,intp)
def SetEosMode(self, mode):
"""
Set the EOS mode (handling).m_eosMode may be a combination
of bits ORed together. The following bits can be used:
0x04: Terminate read when EOS is detected.
0x08: Set EOI (End or identify line) with EOS on write function
0x10: Compare all 8 bits of EOS byte rather than low 7 bits
(all read and write functions). For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosMode(0x04 | 0x08)
"""
intp = wxctb.new_intp()
wxctb.intp_assign(intp, mode)
return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_MODE, intp)
def SetEosChar(self,eos):
"""
Configure the end-of-string (EOS) termination character.
Note! Defining an EOS byte does not cause the driver to
automatically send that byte at the end of write I/O
operations. The application is responsible for placing the
EOS byte at the end of the data strings that it defines.
(National Instruments NI-488.2M Function Reference Manual)
For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosChar(0x10)
"""
intp = wxctb.new_intp()
wxctb.intp_assign(intp, eos)
return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_CHAR,intp)
def SetEosChar(self, eos):
"""
Configure the end-of-string (EOS) termination character.
Note! Defining an EOS byte does not cause the driver to
automatically send that byte at the end of write I/O
operations. The application is responsible for placing the
EOS byte at the end of the data strings that it defines.
(National Instruments NI-488.2M Function Reference Manual)
For example:
g = wxGPIB()
g.Open(\"gpib1\",1)
eos = g.GetEosChar(0x10)
"""
intp = wxctb.new_intp()
wxctb.intp_assign(intp, eos)
return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_CHAR, intp)
