def __init__(self, image_file, **kwargs):
super().__init__(image_file, locator_scope=rayonix_locator_scope, **kwargs)
cfgs = self._ds.env().configStore()
rayonix_cfg = cfgs.get(psana.Rayonix.ConfigV2, psana.Source("Rayonix"))
if self.params.rayonix.bin_size is None:
assert rayonix_cfg.binning_f() == rayonix_cfg.binning_s()
bin_size = rayonix_cfg.binning_f()
else:
bin_size = self.params.rayonix.bin_size
self._pixel_size = rayonix_tbx.get_rayonix_pixel_size(bin_size)
self._image_size = rayonix_tbx.get_rayonix_detector_dimensions(self._ds.env())
def set_up_hitfinder(self):
# See r17537 of mod_average.py.
device = cspad_tbx.address_split(self.address)[2]
if device == 'Cspad':
img_dim = (1765, 1765)
pixel_size = cspad_tbx.pixel_size
elif device == 'marccd':
img_dim = (4500, 4500)
pixel_size = 0.079346
elif device == 'Rayonix':
img_dim = rayonix_tbx.get_rayonix_detector_dimensions(
self.bin_size)
pixel_size = rayonix_tbx.get_rayonix_pixel_size(self.bin_size)
else:
raise RuntimeError("Unsupported device %s" % self.address)
if self.beam_center is None:
self.beam_center = [0, 0]
self.hitfinder_d = cspad_tbx.dpack(
active_areas=self.active_areas,
beam_center_x=pixel_size * self.beam_center[0],
beam_center_y=pixel_size * self.beam_center[1],
data=flex.int(flex.grid(img_dim[0], img_dim[1]), 0),
xtal_target=self.m_xtal_target)
if device == 'Cspad':
# Figure out which ASIC:s are on the central four sensors. This
# only applies to the CSPAD.
assert len(self.active_areas) % 4 == 0
distances = flex.double()
for i in range(0, len(self.active_areas), 4):
cenasic = (
(self.active_areas[i + 0] + self.active_areas[i + 2]) / 2,
(self.active_areas[i + 1] + self.active_areas[i + 3]) / 2)
distances.append(
math.hypot(cenasic[0] - self.beam_center[0],
cenasic[1] - self.beam_center[1]))
orders = flex.sort_permutation(distances)
# Use the central 8 ASIC:s (central 4 sensors).
flags = flex.int(len(self.active_areas) // 4, 0)
for i in range(8):
flags[orders[i]] = 1
self.asic_filter = "distl.tile_flags=" + ",".join(
["%1d" % b for b in flags])
elif device == 'marccd':
# There is only one active area for the MAR CCD, so use it.
self.asic_filter = "distl.tile_flags=1"
elif device == 'Rayonix':
# There is only one active area for the Rayonix, so use it.
self.asic_filter = "distl.tile_flags=1"
def _detector(self):
import psana
pixel_size = rayonix_tbx.get_rayonix_pixel_size(self.params.rayonix.bin_size)
return self._detector_factory.simple(
sensor = 'UNKNOWN',
distance = 100.0,
beam_centre = (50., 50.),
fast_direction = '+x',
slow_direction = '-y',
pixel_size = (pixel_size, pixel_size),
image_size = rayonix_tbx.get_rayonix_detector_dimensions(self.params.rayonix.bin_size),
trusted_range = (rayonix_tbx.rayonix_min_trusted_value, rayonix_tbx.rayonix_saturated_value),
mask = [])
def set_up_hitfinder(self):
# See r17537 of mod_average.py.
device = cspad_tbx.address_split(self.address)[2]
if device == 'Cspad':
img_dim = (1765, 1765)
pixel_size = cspad_tbx.pixel_size
elif device == 'marccd':
img_dim = (4500, 4500)
pixel_size = 0.079346
elif device == 'Rayonix':
img_dim = rayonix_tbx.get_rayonix_detector_dimensions(self.bin_size)
pixel_size = rayonix_tbx.get_rayonix_pixel_size(self.bin_size)
else:
raise RuntimeError("Unsupported device %s" % self.address)
if self.beam_center is None:
self.beam_center = [0,0]
self.hitfinder_d = cspad_tbx.dpack(
active_areas=self.active_areas,
beam_center_x=pixel_size * self.beam_center[0],
beam_center_y=pixel_size * self.beam_center[1],
data=flex.int(flex.grid(img_dim[0], img_dim[1]), 0),
xtal_target=self.m_xtal_target)
if device == 'Cspad':
# Figure out which ASIC:s are on the central four sensors. This
# only applies to the CSPAD.
assert len(self.active_areas) % 4 == 0
distances = flex.double()
for i in range(0, len(self.active_areas), 4):
cenasic = ((self.active_areas[i + 0] + self.active_areas[i + 2]) / 2,
(self.active_areas[i + 1] + self.active_areas[i + 3]) / 2)
distances.append(math.hypot(cenasic[0] - self.beam_center[0],
cenasic[1] - self.beam_center[1]))
orders = flex.sort_permutation(distances)
# Use the central 8 ASIC:s (central 4 sensors).
flags = flex.int(len(self.active_areas) // 4, 0)
for i in range(8):
flags[orders[i]] = 1
self.asic_filter = "distl.tile_flags=" + ",".join(
["%1d" % b for b in flags])
elif device == 'marccd':
# There is only one active area for the MAR CCD, so use it.
self.asic_filter = "distl.tile_flags=1"
elif device == 'Rayonix':
# There is only one active area for the Rayonix, so use it.
self.asic_filter = "distl.tile_flags=1"
def __init__(self, params, run, detector, **kwargs):
from xfel.cxi.cspad_ana import rayonix_tbx
import psana
FormatXTCSingleEvent.__init__(self, params, run, detector, **kwargs)
self._cached_detector = {}
cfgs = run.env().configStore()
rayonix_cfg = cfgs.get(psana.Rayonix.ConfigV2, psana.Source("Rayonix"))
if params.rayonix.bin_size is None:
assert rayonix_cfg.binning_f() == rayonix_cfg.binning_s()
bin_size = rayonix_cfg.binning_f()
else:
bin_size = params.rayonix.bin_size
self._pixel_size = rayonix_tbx.get_rayonix_pixel_size(bin_size)
self._image_size = rayonix_tbx.get_rayonix_detector_dimensions(
run.env())
def __init__(self, image_file, **kwargs):
super(FormatXTCRayonix, self).__init__(
image_file, locator_scope=rayonix_locator_scope, **kwargs
)
self._ds = FormatXTCRayonix._get_datasource(image_file, self.params)
self._env = self._ds.env()
self.populate_events()
self.n_images = len(self.times)
cfgs = self._ds.env().configStore()
rayonix_cfg = cfgs.get(psana.Rayonix.ConfigV2, psana.Source("Rayonix"))
if self.params.rayonix.bin_size is None:
assert rayonix_cfg.binning_f() == rayonix_cfg.binning_s()
bin_size = rayonix_cfg.binning_f()
else:
bin_size = self.params.rayonix.bin_size
self._pixel_size = rayonix_tbx.get_rayonix_pixel_size(bin_size)
self._image_size = rayonix_tbx.get_rayonix_detector_dimensions(self._ds.env())
def beginjob(self, evt, env):
"""The beginjob() function does one-time initialisation from
event- or environment data. It is called at an XTC configure
transition.
@param evt Event data object, a configure object
@param env Environment object
"""
super(common_mode_correction, self).beginjob(evt, env)
# Load the dark image and ensure it is signed and at least 32 bits
# wide, since it will be used for differencing. If a dark image
# is provided, a standard deviation image is required, and all the
# ADU scales must match up.
#
# XXX Can we zap all the ADU_SCALE stuff?
#
# XXX Do we really need to store the substituted values in the
# instance here? At least self._dark_path is referenced later on.
#
# Note that this will load the dark, standard deviation and gain
# once (SEVERAL TIMES) for each process, but the gain is that we
# can do substitutions. But it is only done at the beginning of
# the job.
self.dark_img = None
if self._dark_path is not None:
self._dark_path = cspad_tbx.getOptEvalOrString(
cspad_tbx.pathsubst(self._dark_path, evt, env))
assert self._dark_stddev_path is not None
dark_dict = easy_pickle.load(self._dark_path)
#assert "ADU_SCALE" not in dark_dict # force use of recalculated dark
self.dark_img = dark_dict['DATA']
assert isinstance(self.dark_img, flex.double)
self._dark_stddev_path = cspad_tbx.getOptEvalOrString(
cspad_tbx.pathsubst(self._dark_stddev_path, evt, env))
self.dark_stddev = easy_pickle.load(self._dark_stddev_path)['DATA']
assert isinstance(self.dark_stddev, flex.double)
self.dark_mask = (self.dark_stddev > 0)
# Load the mask image and ensure it is signed and at least 32 bits
# wide, since it will be used for differencing.
self.gain_map = None
if self._gain_map_path is not None:
self._gain_map_path = cspad_tbx.getOptEvalOrString(
cspad_tbx.pathsubst(self._gain_map_path, evt, env))
self.gain_map = easy_pickle.load(self._gain_map_path)['DATA']
if self.gain_map_level is not None:
sel = flex.bool([bool(f) for f in self.gain_map])
sel.reshape(flex.grid(self.gain_map.focus()))
self.gain_map = self.gain_map.set_selected(~sel, self.gain_map_level)
self.gain_map = self.gain_map.set_selected(sel, 1)
assert isinstance(self.gain_map, flex.double)
self.mask_img = None
if self._mask_path is not None:
self._mask_path = cspad_tbx.getOptEvalOrString(
cspad_tbx.pathsubst(self._mask_path, evt, env))
self.mask_img = easy_pickle.load(self._mask_path)['DATA']
assert isinstance(self.mask_img, flex.double) \
or isinstance(self.mask_img, flex.int)
if self.address == 'XppGon-0|marccd-0':
#mod_mar.py will set these during its event function
self.active_areas = None
self.beam_center = None
elif self.address == 'XppEndstation-0|Rayonix-0' or \
self.address == 'MfxEndstation-0|Rayonix-0':
assert self.override_beam_x is not None
assert self.override_beam_y is not None
from xfel.cxi.cspad_ana import rayonix_tbx
maxx, maxy = rayonix_tbx.get_rayonix_detector_dimensions(self.bin_size)
if self.crop_rayonix:
bx = int(round(self.override_beam_x))
by = int(round(self.override_beam_y))
minsize = min([bx,by,maxx-bx,maxy-by])
self.beam_center = minsize,minsize
self.active_areas = flex.int([0,0,2*minsize,2*minsize])
self.rayonix_crop_slice = slice(by-minsize,by+minsize), slice(bx-minsize,bx+minsize)
else:
self.beam_center = self.override_beam_x,self.override_beam_y
self.active_areas = flex.int([0,0,maxx,maxy])
elif self.address == 'XppGon-0|Cspad-0':
evt_time = cspad_tbx.evt_time(evt) # tuple of seconds, milliseconds
timestamp = cspad_tbx.evt_timestamp(evt_time) # human readable format
from iotbx.detectors.cspad_detector_formats import detector_format_version, reverse_timestamp
from xfel.cxi.cspad_ana.cspad_tbx import xpp_active_areas
version_lookup = detector_format_version(self.address, reverse_timestamp(timestamp)[0])
assert version_lookup is not None
self.active_areas = xpp_active_areas[version_lookup]['active_areas']
self.beam_center = [1765 // 2, 1765 // 2]
else:
(self.beam_center, self.active_areas) = cspad_tbx.cbcaa(
cspad_tbx.getConfig(self.address, env), self.sections)
def submit_job(app, job):
import os, libtbx.load_env
from xfel.ui import settings_dir
configs_dir = os.path.join(settings_dir, "cfgs")
if not os.path.exists(configs_dir):
os.makedirs(configs_dir)
target_phil_path = os.path.join(
configs_dir, "%s_%s_r%04d_t%03d_rg%03d_params.phil" %
(app.params.experiment, app.params.experiment_tag, job.run.run,
job.trial.trial, job.rungroup.id))
dispatcher = app.params.dispatcher
phil_str = job.trial.target_phil_str
if job.rungroup.extra_phil_str is not None:
phil_str += "\n" + job.rungroup.extra_phil_str
from xfel.ui import known_dials_dispatchers
if dispatcher in known_dials_dispatchers:
import importlib
orig_phil_scope = importlib.import_module(
known_dials_dispatchers[dispatcher]).phil_scope
from iotbx.phil import parse
if job.rungroup.two_theta_low is not None or job.rungroup.two_theta_high is not None:
override_str = """
radial_average {
enable = True
show_plots = False
verbose = False
output_bins = False
}
"""
phil_scope = orig_phil_scope.fetch(parse(override_str))
else:
phil_scope = orig_phil_scope
trial_params = phil_scope.fetch(parse(phil_str)).extract()
image_format = job.rungroup.format
assert image_format in ['cbf', 'pickle']
if image_format == 'cbf':
if "rayonix" in job.rungroup.detector_address.lower():
mode = "rayonix"
elif "cspad" in job.rungroup.detector_address.lower():
mode = "cspad"
elif "jungfrau" in job.rungroup.detector_address.lower():
mode = "jungfrau"
else:
assert False, "Couldn't figure out what kind of detector is specified by address %s" % job.rungroup.detector_address
if dispatcher == 'cctbx.xfel.xtc_process':
trial_params.format.file_format = image_format
trial_params.format.cbf.mode = mode
elif dispatcher == "cxi.xtc_process":
image_format = 'pickle'
else:
raise RuntimeError("Unknown dispatcher: %s" % dispatcher)
if job.rungroup.calib_dir is not None or job.rungroup.config_str is not None or dispatcher == 'cxi.xtc_process' or image_format == 'pickle':
config_path = os.path.join(
configs_dir, "%s_%s_r%04d_t%03d_rg%03d.cfg" %
(app.params.experiment, app.params.experiment_tag, job.run.run,
job.trial.trial, job.rungroup.id))
else:
config_path = None
# Dictionary for formating the submit phil and, if used, the labelit cfg file
d = dict(
# Generally for the LABELIT backend or image pickles
address=job.rungroup.detector_address,
default_calib_dir=libtbx.env.find_in_repositories(
"xfel/metrology/CSPad/run4/CxiDs1.0_Cspad.0"),
dark_avg_path=job.rungroup.dark_avg_path,
dark_stddev_path=job.rungroup.dark_stddev_path,
untrusted_pixel_mask_path=job.rungroup.untrusted_pixel_mask_path,
detz_parameter=job.rungroup.detz_parameter,
gain_map_path=job.rungroup.gain_map_path,
gain_mask_level=job.rungroup.gain_mask_level,
beamx=job.rungroup.beamx,
beamy=job.rungroup.beamy,
energy=job.rungroup.energy,
binning=job.rungroup.binning,
two_theta_low=job.rungroup.two_theta_low,
two_theta_high=job.rungroup.two_theta_high,
# Generally for job submission
dry_run=app.params.dry_run,
dispatcher=app.params.dispatcher,
cfg=config_path,
experiment=app.params.experiment,
run_num=job.run.run,
output_dir=app.params.output_folder,
use_ffb=app.params.use_ffb,
# Generally for both
trial=job.trial.trial,
rungroup=job.rungroup.rungroup_id,
experiment_tag=app.params.experiment_tag,
calib_dir=job.rungroup.calib_dir,
nproc=app.params.mp.nproc,
queue=app.params.mp.queue,
target=target_phil_path,
host=app.params.db.host,
dbname=app.params.db.name,
user=app.params.db.user,
)
if app.params.db.password is not None and len(app.params.db.password) == 0:
d['password'] = None
else:
d['password'] = app.params.db.password
phil = open(target_phil_path, "w")
if dispatcher == 'cxi.xtc_process':
phil.write(phil_str)
elif dispatcher in known_dials_dispatchers:
extra_scope = None
if dispatcher == 'cctbx.xfel.xtc_process':
if image_format == "cbf":
trial_params.input.address = job.rungroup.detector_address
trial_params.format.cbf.detz_offset = job.rungroup.detz_parameter
trial_params.format.cbf.override_energy = job.rungroup.energy
trial_params.format.cbf.invalid_pixel_mask = job.rungroup.untrusted_pixel_mask_path
if mode == 'cspad':
trial_params.format.cbf.cspad.gain_mask_value = job.rungroup.gain_mask_level
elif mode == 'rayonix':
trial_params.format.cbf.rayonix.bin_size = job.rungroup.binning
trial_params.format.cbf.rayonix.override_beam_x = job.rungroup.beamx
trial_params.format.cbf.rayonix.override_beam_y = job.rungroup.beamy
trial_params.dispatch.process_percent = job.trial.process_percent
if trial_params.input.known_orientations_folder is not None:
trial_params.input.known_orientations_folder = trial_params.input.known_orientations_folder.format(
run=job.run.run)
else:
trial_params.spotfinder.lookup.mask = job.rungroup.untrusted_pixel_mask_path
trial_params.integration.lookup.mask = job.rungroup.untrusted_pixel_mask_path
locator_path = os.path.join(
configs_dir, "%s_%s_r%04d_t%03d_rg%03d.loc" %
(app.params.experiment, app.params.experiment_tag, job.run.run,
job.trial.trial, job.rungroup.id))
locator = open(locator_path, 'w')
locator.write("experiment=%s\n" % app.params.experiment)
locator.write("run=%d\n" % job.run.run)
locator.write("detector_address=%s\n" %
job.rungroup.detector_address)
if image_format == "cbf":
if mode == 'rayonix':
from xfel.cxi.cspad_ana import rayonix_tbx
pixel_size = rayonix_tbx.get_rayonix_pixel_size(
job.rungroup.binning)
fast, slow = rayonix_tbx.get_rayonix_detector_dimensions(
job.rungroup.binning)
extra_scope = parse(
"geometry { detector { panel { origin = (%f, %f, %f) } } }"
%
(-job.rungroup.beamx * pixel_size, job.rungroup.beamy *
pixel_size, -job.rungroup.detz_parameter))
locator.write("rayonix.bin_size=%s\n" %
job.rungroup.binning)
locator.close()
d['locator'] = locator_path
if job.rungroup.two_theta_low is not None or job.rungroup.two_theta_high is not None:
try:
trial_params.radial_average.two_theta_low = job.rungroup.two_theta_low
trial_params.radial_average.two_theta_high = job.rungroup.two_theta_high
except AttributeError:
pass # not all dispatchers support radial averaging
working_phil = phil_scope.format(python_object=trial_params)
if extra_scope:
working_phil = working_phil.fetch(extra_scope)
diff_phil = orig_phil_scope.fetch_diff(source=working_phil)
phil.write(diff_phil.as_str())
phil.close()
if config_path is not None:
if dispatcher != 'cxi.xtc_process':
d['untrusted_pixel_mask_path'] = None # Don't pass a pixel mask to mod_image_dict as it will
# will be used during dials processing directly
config_str = "[psana]\n"
if job.rungroup.calib_dir is not None:
config_str += "calib-dir=%s\n" % job.rungroup.calib_dir
modules = []
if job.rungroup.config_str is not None:
for line in job.rungroup.config_str.split("\n"):
if line.startswith('['):
modules.append(line.lstrip('[').rstrip(']'))
if dispatcher == 'cxi.xtc_process':
modules.insert(0, 'my_ana_pkg.mod_radial_average')
modules.extend(
['my_ana_pkg.mod_hitfind:index', 'my_ana_pkg.mod_dump:index'])
elif image_format == 'pickle':
modules.insert(0, 'my_ana_pkg.mod_radial_average')
modules.extend(['my_ana_pkg.mod_image_dict'])
if app.params.dump_shots:
modules.insert(0, 'my_ana_pkg.mod_dump:shot')
if len(modules) > 0:
config_str += "modules = %s\n" % (" ".join(modules))
if job.rungroup.config_str is not None:
config_str += job.rungroup.config_str + "\n"
if dispatcher == 'cxi.xtc_process' or image_format == 'pickle':
d['address'] = d['address'].replace('.', '-').replace(
':', '|') # old style address
if dispatcher == 'cxi.xtc_process':
template = open(
os.path.join(
libtbx.env.find_in_repositories("xfel/ui/db/cfgs"),
"index_all.cfg"))
elif image_format == 'pickle':
template = open(
os.path.join(
libtbx.env.find_in_repositories("xfel/ui/db/cfgs"),
"image_dict.cfg"))
for line in template.readlines():
config_str += line.format(**d)
template.close()
d['address'] = job.rungroup.detector_address
cfg = open(config_path, 'w')
cfg.write(config_str)
cfg.close()
if dispatcher != 'cxi.xtc_process':
d['untrusted_pixel_mask_path'] = job.rungroup.untrusted_pixel_mask_path
submit_phil_path = os.path.join(
configs_dir, "%s_%s_r%04d_t%03d_rg%03d_submit.phil" %
(app.params.experiment, app.params.experiment_tag, job.run.run,
job.trial.trial, job.rungroup.id))
submit_root = libtbx.env.find_in_repositories("xfel/ui/db/cfgs")
if dispatcher in ['cxi.xtc_process', 'cctbx.xfel.xtc_process']:
template = open(os.path.join(submit_root, "submit_xtc_process.phil"))
elif dispatcher == 'cctbx.xfel.process':
template = open(os.path.join(submit_root, "submit_xfel_process.phil"))
else:
test_root = os.path.join(submit_root, "submit_" + dispatcher + ".phil")
if os.path.exists(test_root):
template = open(test_root)
else:
template = open(os.path.joins(submit_root, "submit.phil"))
phil = open(submit_phil_path, "w")
if dispatcher == 'cxi.xtc_process':
d['target'] = None # any target phil will be in mod_hitfind
for line in template.readlines():
phil.write(line.format(**d))
d['target'] = target_phil_path
template.close()
phil.close()
from xfel.command_line.cxi_mpi_submit import Script as submit_script
return submit_script().run([submit_phil_path])
def run(self):
""" Process all images assigned to this thread """
params, options = self.parser.parse_args(show_diff_phil=True)
if params.input.experiment is None or \
params.input.run_num is None or \
params.input.address is None:
raise Usage(self.usage)
if params.format.file_format == "cbf":
if params.format.cbf.detz_offset is None:
raise Usage(self.usage)
elif params.format.file_format == "pickle":
if params.input.cfg is None:
raise Usage(self.usage)
else:
raise Usage(self.usage)
if not os.path.exists(params.output.output_dir):
raise Sorry("Output path not found:" + params.output.output_dir)
#Environment variable redirect for CBFLib temporary CBF_TMP_XYZ file output
if params.format.file_format == "cbf":
if params.output.tmp_output_dir is None:
tmp_dir = os.path.join(params.output.output_dir, '.tmp')
else:
tmp_dir = os.path.join(params.output.tmp_output_dir, '.tmp')
if not os.path.exists(tmp_dir):
with show_mail_on_error():
try:
os.makedirs(tmp_dir)
# Can fail if running multiprocessed - that's OK if the folder was created
except OSError as e: # In Python 2, a FileExistsError is just an OSError
if e.errno != errno.EEXIST: # If this OSError is not a FileExistsError
raise
os.environ['CBF_TMP_DIR'] = tmp_dir
# Save the paramters
self.params = params
self.options = options
from mpi4py import MPI
comm = MPI.COMM_WORLD
rank = comm.Get_rank(
) # each process in MPI has a unique id, 0-indexed
size = comm.Get_size() # size: number of processes running in this job
# set up psana
if params.input.cfg is not None:
psana.setConfigFile(params.input.cfg)
if params.input.calib_dir is not None:
psana.setOption('psana.calib-dir', params.input.calib_dir)
dataset_name = "exp=%s:run=%s:idx" % (params.input.experiment,
params.input.run_num)
if params.input.xtc_dir is not None:
dataset_name = "exp=%s:run=%s:idx:dir=%s" % (
params.input.experiment, params.input.run_num,
params.input.xtc_dir)
ds = psana.DataSource(dataset_name)
if params.format.file_format == "cbf":
src = psana.Source('DetInfo(%s)' % params.input.address)
psana_det = psana.Detector(params.input.address, ds.env())
# set this to sys.maxint to analyze all events
if params.dispatch.max_events is None:
max_events = sys.maxsize
else:
max_events = params.dispatch.max_events
for run in ds.runs():
if params.format.file_format == "cbf":
if params.format.cbf.mode == "cspad":
# load a header only cspad cbf from the slac metrology
base_dxtbx = cspad_cbf_tbx.env_dxtbx_from_slac_metrology(
run, params.input.address)
if base_dxtbx is None:
raise Sorry(
"Couldn't load calibration file for run %d" %
run.run())
elif params.format.cbf.mode == "rayonix":
# load a header only rayonix cbf from the input parameters
detector_size = rayonix_tbx.get_rayonix_detector_dimensions(
ds.env())
base_dxtbx = rayonix_tbx.get_dxtbx_from_params(
params.format.cbf.rayonix, detector_size)
# list of all events
times = run.times()
if params.dispatch.selected_events:
times = [
t for t in times
if cspad_tbx.evt_timestamp((t.seconds(), t.nanoseconds() /
1e6)) in params.input.timestamp
]
nevents = min(len(times), max_events)
# chop the list into pieces, depending on rank. This assigns each process
# events such that the get every Nth event where N is the number of processes
mytimes = [
times[i] for i in range(nevents) if (i + rank) % size == 0
]
for i in range(len(mytimes)):
evt = run.event(mytimes[i])
id = evt.get(psana.EventId)
print("Event #", i, " has id:", id)
timestamp = cspad_tbx.evt_timestamp(
cspad_tbx.evt_time(evt)) # human readable format
if timestamp is None:
print("No timestamp, skipping shot")
continue
if evt.get("skip_event") or "skip_event" in [
key.key() for key in evt.keys()
]:
print("Skipping event", timestamp)
continue
t = timestamp
s = t[0:4] + t[5:7] + t[8:10] + t[11:13] + t[14:16] + t[
17:19] + t[20:23]
print("Processing shot", s)
if params.format.file_format == "pickle":
if evt.get("skip_event"):
print("Skipping event", id)
continue
# the data needs to have already been processed and put into the event by psana
data = evt.get(params.format.pickle.out_key)
if data is None:
print("No data")
continue
# set output paths according to the templates
path = os.path.join(params.output.output_dir,
"shot-" + s + ".pickle")
print("Saving", path)
easy_pickle.dump(path, data)
elif params.format.file_format == "cbf":
if params.format.cbf.mode == "cspad":
# get numpy array, 32x185x388
data = cspad_cbf_tbx.get_psana_corrected_data(
psana_det,
evt,
use_default=False,
dark=True,
common_mode=None,
apply_gain_mask=params.format.cbf.cspad.
gain_mask_value is not None,
gain_mask_value=params.format.cbf.cspad.
gain_mask_value,
per_pixel_gain=False)
distance = cspad_tbx.env_distance(
params.input.address, run.env(),
params.format.cbf.detz_offset)
elif params.format.cbf.mode == "rayonix":
data = rayonix_tbx.get_data_from_psana_event(
evt, params.input.address)
distance = params.format.cbf.detz_offset
if distance is None:
print("No distance, skipping shot")
continue
if self.params.format.cbf.override_energy is None:
wavelength = cspad_tbx.evt_wavelength(evt)
if wavelength is None:
print("No wavelength, skipping shot")
continue
else:
wavelength = 12398.4187 / self.params.format.cbf.override_energy
# stitch together the header, data and metadata into the final dxtbx format object
if params.format.cbf.mode == "cspad":
image = cspad_cbf_tbx.format_object_from_data(
base_dxtbx,
data,
distance,
wavelength,
timestamp,
params.input.address,
round_to_int=False)
elif params.format.cbf.mode == "rayonix":
image = rayonix_tbx.format_object_from_data(
base_dxtbx, data, distance, wavelength, timestamp,
params.input.address)
path = os.path.join(params.output.output_dir,
"shot-" + s + ".cbf")
print("Saving", path)
# write the file
import pycbf
image._cbf_handle.write_widefile(path.encode(), pycbf.CBF,\
pycbf.MIME_HEADERS|pycbf.MSG_DIGEST|pycbf.PAD_4K, 0)
run.end()
ds.end()
def average(argv=None):
if argv == None:
argv = sys.argv[1:]
try:
from mpi4py import MPI
except ImportError:
raise Sorry("MPI not found")
command_line = (libtbx.option_parser.option_parser(
usage="""
%s [-p] -c config -x experiment -a address -r run -d detz_offset [-o outputdir] [-A averagepath] [-S stddevpath] [-M maxpath] [-n numevents] [-s skipnevents] [-v] [-m] [-b bin_size] [-X override_beam_x] [-Y override_beam_y] [-D xtc_dir] [-f]
To write image pickles use -p, otherwise the program writes CSPAD CBFs.
Writing CBFs requires the geometry to be already deployed.
Examples:
cxi.mpi_average -c cxi49812/average.cfg -x cxi49812 -a CxiDs1.0:Cspad.0 -r 25 -d 571
Use one process on the current node to process all the events from run 25 of
experiment cxi49812, using a detz_offset of 571.
mpirun -n 16 cxi.mpi_average -c cxi49812/average.cfg -x cxi49812 -a CxiDs1.0:Cspad.0 -r 25 -d 571
As above, using 16 cores on the current node.
bsub -a mympi -n 100 -o average.out -q psanaq cxi.mpi_average -c cxi49812/average.cfg -x cxi49812 -a CxiDs1.0:Cspad.0 -r 25 -d 571 -o cxi49812
As above, using the psanaq and 100 cores, putting the log in average.out and
the output images in the folder cxi49812.
""" % libtbx.env.dispatcher_name)
.option(None, "--as_pickle", "-p",
action="store_true",
default=False,
dest="as_pickle",
help="Write results as image pickle files instead of cbf files")
.option(None, "--config", "-c",
type="string",
default=None,
dest="config",
metavar="PATH",
help="psana config file")
.option(None, "--experiment", "-x",
type="string",
default=None,
dest="experiment",
help="experiment name (eg cxi84914)")
.option(None, "--run", "-r",
type="int",
default=None,
dest="run",
help="run number")
.option(None, "--address", "-a",
type="string",
default="CxiDs2.0:Cspad.0",
dest="address",
help="detector address name (eg CxiDs2.0:Cspad.0)")
.option(None, "--detz_offset", "-d",
type="float",
default=None,
dest="detz_offset",
help="offset (in mm) from sample interaction region to back of CSPAD detector rail (CXI), or detector distance (XPP)")
.option(None, "--outputdir", "-o",
type="string",
default=".",
dest="outputdir",
metavar="PATH",
help="Optional path to output directory for output files")
.option(None, "--averagebase", "-A",
type="string",
default="{experiment!l}_avg-r{run:04d}",
dest="averagepath",
metavar="PATH",
help="Path to output average image without extension. String substitution allowed")
.option(None, "--stddevbase", "-S",
type="string",
default="{experiment!l}_stddev-r{run:04d}",
dest="stddevpath",
metavar="PATH",
help="Path to output standard deviation image without extension. String substitution allowed")
.option(None, "--maxbase", "-M",
type="string",
default="{experiment!l}_max-r{run:04d}",
dest="maxpath",
metavar="PATH",
help="Path to output maximum projection image without extension. String substitution allowed")
.option(None, "--numevents", "-n",
type="int",
default=None,
dest="numevents",
help="Maximum number of events to process. Default: all")
.option(None, "--skipevents", "-s",
type="int",
default=0,
dest="skipevents",
help="Number of events in the beginning of the run to skip. Default: 0")
.option(None, "--verbose", "-v",
action="store_true",
default=False,
dest="verbose",
help="Print more information about progress")
.option(None, "--pickle-optical-metrology", "-m",
action="store_true",
default=False,
dest="pickle_optical_metrology",
help="If writing pickle files, use the optical metrology in the experiment's calib directory")
.option(None, "--bin_size", "-b",
type="int",
default=None,
dest="bin_size",
help="Rayonix detector bin size")
.option(None, "--override_beam_x", "-X",
type="float",
default=None,
dest="override_beam_x",
help="Rayonix detector beam center x coordinate")
.option(None, "--override_beam_y", "-Y",
type="float",
default=None,
dest="override_beam_y",
help="Rayonix detector beam center y coordinate")
.option(None, "--calib_dir", "-C",
type="string",
default=None,
dest="calib_dir",
metavar="PATH",
help="calibration directory")
.option(None, "--xtc_dir", "-D",
type="string",
default=None,
dest="xtc_dir",
metavar="PATH",
help="xtc stream directory")
.option(None, "--use_ffb", "-f",
action="store_true",
default=False,
dest="use_ffb",
help="Use the fast feedback filesystem at LCLS. Only for the active experiment!")
).process(args=argv)
if len(command_line.args) > 0 or \
command_line.options.as_pickle is None or \
command_line.options.experiment is None or \
command_line.options.run is None or \
command_line.options.address is None or \
command_line.options.detz_offset is None or \
command_line.options.averagepath is None or \
command_line.options.stddevpath is None or \
command_line.options.maxpath is None or \
command_line.options.pickle_optical_metrology is None:
command_line.parser.show_help()
return
# set this to sys.maxint to analyze all events
if command_line.options.numevents is None:
maxevents = sys.maxint
else:
maxevents = command_line.options.numevents
comm = MPI.COMM_WORLD
rank = comm.Get_rank()
size = comm.Get_size()
if command_line.options.config is not None:
psana.setConfigFile(command_line.options.config)
dataset_name = "exp=%s:run=%d:idx"%(command_line.options.experiment, command_line.options.run)
if command_line.options.xtc_dir is not None:
if command_line.options.use_ffb:
raise Sorry("Cannot specify the xtc_dir and use SLAC's ffb system")
dataset_name += ":dir=%s"%command_line.options.xtc_dir
elif command_line.options.use_ffb:
# as ffb is only at SLAC, ok to hardcode /reg/d here
dataset_name += ":dir=/reg/d/ffb/%s/%s/xtc"%(command_line.options.experiment[0:3],command_line.options.experiment)
ds = psana.DataSource(dataset_name)
address = command_line.options.address
src = psana.Source('DetInfo(%s)'%address)
if not command_line.options.as_pickle:
psana_det = psana.Detector(address, ds.env())
nevent = np.array([0.])
for run in ds.runs():
runnumber = run.run()
# list of all events
if command_line.options.skipevents > 0:
print "Skipping first %d events"%command_line.options.skipevents
times = run.times()[command_line.options.skipevents:]
nevents = min(len(times),maxevents)
# chop the list into pieces, depending on rank. This assigns each process
# events such that the get every Nth event where N is the number of processes
mytimes = [times[i] for i in xrange(nevents) if (i+rank)%size == 0]
for i in xrange(len(mytimes)):
if i%10==0: print 'Rank',rank,'processing event',rank*len(mytimes)+i,', ',i,'of',len(mytimes)
evt = run.event(mytimes[i])
#print "Event #",rank*mylength+i," has id:",evt.get(EventId)
if 'Rayonix' in command_line.options.address:
data = evt.get(Camera.FrameV1,src)
if data is None:
print "No data"
continue
data=data.data16().astype(np.float64)
elif command_line.options.as_pickle:
data = evt.get(psana.ndarray_float64_3, src, 'image0')
else:
# get numpy array, 32x185x388
data = psana_det.calib(evt) # applies psana's complex run-dependent calibrations
if data is None:
print "No data"
continue
d = cspad_tbx.env_distance(address, run.env(), command_line.options.detz_offset)
if d is None:
print "No distance, skipping shot"
continue
if 'distance' in locals():
distance += d
else:
distance = np.array([float(d)])
w = cspad_tbx.evt_wavelength(evt)
if w is None:
print "No wavelength, skipping shot"
continue
if 'wavelength' in locals():
wavelength += w
else:
wavelength = np.array([w])
t = cspad_tbx.evt_time(evt)
if t is None:
print "No timestamp, skipping shot"
continue
if 'timestamp' in locals():
timestamp += t[0] + (t[1]/1000)
else:
timestamp = np.array([t[0] + (t[1]/1000)])
if 'sum' in locals():
sum+=data
else:
sum=np.array(data, copy=True)
if 'sumsq' in locals():
sumsq+=data*data
else:
sumsq=data*data
if 'maximum' in locals():
maximum=np.maximum(maximum,data)
else:
maximum=np.array(data, copy=True)
nevent += 1
#sum the images across mpi cores
if size > 1:
print "Synchronizing rank", rank
totevent = np.zeros(nevent.shape)
comm.Reduce(nevent,totevent)
if rank == 0 and totevent[0] == 0:
raise Sorry("No events found in the run")
sumall = np.zeros(sum.shape).astype(sum.dtype)
comm.Reduce(sum,sumall)
sumsqall = np.zeros(sumsq.shape).astype(sumsq.dtype)
comm.Reduce(sumsq,sumsqall)
maxall = np.zeros(maximum.shape).astype(maximum.dtype)
comm.Reduce(maximum,maxall, op=MPI.MAX)
waveall = np.zeros(wavelength.shape).astype(wavelength.dtype)
comm.Reduce(wavelength,waveall)
distall = np.zeros(distance.shape).astype(distance.dtype)
comm.Reduce(distance,distall)
timeall = np.zeros(timestamp.shape).astype(timestamp.dtype)
comm.Reduce(timestamp,timeall)
if rank==0:
if size > 1:
print "Synchronized"
# Accumulating floating-point numbers introduces errors,
# which may cause negative variances. Since a two-pass
# approach is unacceptable, the standard deviation is
# clamped at zero.
mean = sumall / float(totevent[0])
variance = (sumsqall / float(totevent[0])) - (mean**2)
variance[variance < 0] = 0
stddev = np.sqrt(variance)
wavelength = waveall[0] / totevent[0]
distance = distall[0] / totevent[0]
pixel_size = cspad_tbx.pixel_size
saturated_value = cspad_tbx.cspad_saturated_value
timestamp = timeall[0] / totevent[0]
timestamp = (int(timestamp), timestamp % int(timestamp) * 1000)
timestamp = cspad_tbx.evt_timestamp(timestamp)
if command_line.options.as_pickle:
extension = ".pickle"
else:
extension = ".cbf"
dest_paths = [cspad_tbx.pathsubst(command_line.options.averagepath + extension, evt, ds.env()),
cspad_tbx.pathsubst(command_line.options.stddevpath + extension, evt, ds.env()),
cspad_tbx.pathsubst(command_line.options.maxpath + extension, evt, ds.env())]
dest_paths = [os.path.join(command_line.options.outputdir, path) for path in dest_paths]
if 'Rayonix' in command_line.options.address:
from xfel.cxi.cspad_ana import rayonix_tbx
pixel_size = rayonix_tbx.get_rayonix_pixel_size(command_line.options.bin_size)
beam_center = [command_line.options.override_beam_x,command_line.options.override_beam_y]
detector_dimensions = rayonix_tbx.get_rayonix_detector_dimensions(command_line.options.bin_size)
active_areas = flex.int([0,0,detector_dimensions[0],detector_dimensions[1]])
split_address = cspad_tbx.address_split(address)
old_style_address = split_address[0] + "-" + split_address[1] + "|" + split_address[2] + "-" + split_address[3]
for data, path in zip([mean, stddev, maxall], dest_paths):
print "Saving", path
d = cspad_tbx.dpack(
active_areas=active_areas,
address=old_style_address,
beam_center_x=pixel_size * beam_center[0],
beam_center_y=pixel_size * beam_center[1],
data=flex.double(data),
distance=distance,
pixel_size=pixel_size,
saturated_value=rayonix_tbx.rayonix_saturated_value,
timestamp=timestamp,
wavelength=wavelength)
easy_pickle.dump(path, d)
elif command_line.options.as_pickle:
split_address = cspad_tbx.address_split(address)
old_style_address = split_address[0] + "-" + split_address[1] + "|" + split_address[2] + "-" + split_address[3]
xpp = 'xpp' in address.lower()
if xpp:
evt_time = cspad_tbx.evt_time(evt) # tuple of seconds, milliseconds
timestamp = cspad_tbx.evt_timestamp(evt_time) # human readable format
from xfel.detector_formats import detector_format_version, reverse_timestamp
from xfel.cxi.cspad_ana.cspad_tbx import xpp_active_areas
version_lookup = detector_format_version(old_style_address, reverse_timestamp(timestamp)[0])
assert version_lookup is not None
active_areas = xpp_active_areas[version_lookup]['active_areas']
beam_center = [1765 // 2, 1765 // 2]
else:
if command_line.options.calib_dir is not None:
metro_path = command_line.options.calib_dir
elif command_line.options.pickle_optical_metrology:
from xfel.cftbx.detector.cspad_cbf_tbx import get_calib_file_path
metro_path = get_calib_file_path(run.env(), address, run)
else:
metro_path = libtbx.env.find_in_repositories("xfel/metrology/CSPad/run4/CxiDs1.0_Cspad.0")
sections = parse_calib.calib2sections(metro_path)
beam_center, active_areas = cspad_tbx.cbcaa(
cspad_tbx.getConfig(address, ds.env()), sections)
class fake_quad(object):
def __init__(self, q, d):
self.q = q
self.d = d
def quad(self):
return self.q
def data(self):
return self.d
if xpp:
quads = [fake_quad(i, mean[i*8:(i+1)*8,:,:]) for i in xrange(4)]
mean = cspad_tbx.image_xpp(old_style_address, None, ds.env(), active_areas, quads = quads)
mean = flex.double(mean.astype(np.float64))
quads = [fake_quad(i, stddev[i*8:(i+1)*8,:,:]) for i in xrange(4)]
stddev = cspad_tbx.image_xpp(old_style_address, None, ds.env(), active_areas, quads = quads)
stddev = flex.double(stddev.astype(np.float64))
quads = [fake_quad(i, maxall[i*8:(i+1)*8,:,:]) for i in xrange(4)]
maxall = cspad_tbx.image_xpp(old_style_address, None, ds.env(), active_areas, quads = quads)
maxall = flex.double(maxall.astype(np.float64))
else:
quads = [fake_quad(i, mean[i*8:(i+1)*8,:,:]) for i in xrange(4)]
mean = cspad_tbx.CsPadDetector(
address, evt, ds.env(), sections, quads=quads)
mean = flex.double(mean.astype(np.float64))
quads = [fake_quad(i, stddev[i*8:(i+1)*8,:,:]) for i in xrange(4)]
stddev = cspad_tbx.CsPadDetector(
address, evt, ds.env(), sections, quads=quads)
stddev = flex.double(stddev.astype(np.float64))
quads = [fake_quad(i, maxall[i*8:(i+1)*8,:,:]) for i in xrange(4)]
maxall = cspad_tbx.CsPadDetector(
address, evt, ds.env(), sections, quads=quads)
maxall = flex.double(maxall.astype(np.float64))
for data, path in zip([mean, stddev, maxall], dest_paths):
print "Saving", path
d = cspad_tbx.dpack(
active_areas=active_areas,
address=old_style_address,
beam_center_x=pixel_size * beam_center[0],
beam_center_y=pixel_size * beam_center[1],
data=data,
distance=distance,
pixel_size=pixel_size,
saturated_value=saturated_value,
timestamp=timestamp,
wavelength=wavelength)
easy_pickle.dump(path, d)
else:
# load a header only cspad cbf from the slac metrology
from xfel.cftbx.detector import cspad_cbf_tbx
import pycbf
base_dxtbx = cspad_cbf_tbx.env_dxtbx_from_slac_metrology(run, address)
if base_dxtbx is None:
raise Sorry("Couldn't load calibration file for run %d"%run.run())
for data, path in zip([mean, stddev, maxall], dest_paths):
print "Saving", path
cspad_img = cspad_cbf_tbx.format_object_from_data(base_dxtbx, data, distance, wavelength, timestamp, address)
cspad_img._cbf_handle.write_widefile(path, pycbf.CBF,\
pycbf.MIME_HEADERS|pycbf.MSG_DIGEST|pycbf.PAD_4K, 0)
def average(argv=None):
if argv == None:
argv = sys.argv[1:]
try:
from mpi4py import MPI
except ImportError:
raise Sorry("MPI not found")
command_line = (libtbx.option_parser.option_parser(usage="""
%s [-p] -c config -x experiment -a address -r run -d detz_offset [-o outputdir] [-A averagepath] [-S stddevpath] [-M maxpath] [-n numevents] [-s skipnevents] [-v] [-m] [-b bin_size] [-X override_beam_x] [-Y override_beam_y] [-D xtc_dir] [-f] [-g gain_mask_value] [--min] [--minpath minpath]
To write image pickles use -p, otherwise the program writes CSPAD CBFs.
Writing CBFs requires the geometry to be already deployed.
Examples:
cxi.mpi_average -c cxi49812/average.cfg -x cxi49812 -a CxiDs1.0:Cspad.0 -r 25 -d 571
Use one process on the current node to process all the events from run 25 of
experiment cxi49812, using a detz_offset of 571.
mpirun -n 16 cxi.mpi_average -c cxi49812/average.cfg -x cxi49812 -a CxiDs1.0:Cspad.0 -r 25 -d 571
As above, using 16 cores on the current node.
bsub -a mympi -n 100 -o average.out -q psanaq cxi.mpi_average -c cxi49812/average.cfg -x cxi49812 -a CxiDs1.0:Cspad.0 -r 25 -d 571 -o cxi49812
As above, using the psanaq and 100 cores, putting the log in average.out and
the output images in the folder cxi49812.
""" % libtbx.env.dispatcher_name).option(
None,
"--as_pickle",
"-p",
action="store_true",
default=False,
dest="as_pickle",
help="Write results as image pickle files instead of cbf files"
).option(
None,
"--raw_data",
"-R",
action="store_true",
default=False,
dest="raw_data",
help=
"Disable psana corrections such as dark pedestal subtraction or common mode (cbf only)"
).option(
None,
"--background_pickle",
"-B",
default=None,
dest="background_pickle",
help=""
).option(
None,
"--config",
"-c",
type="string",
default=None,
dest="config",
metavar="PATH",
help="psana config file"
).option(
None,
"--experiment",
"-x",
type="string",
default=None,
dest="experiment",
help="experiment name (eg cxi84914)"
).option(
None,
"--run",
"-r",
type="int",
default=None,
dest="run",
help="run number"
).option(
None,
"--address",
"-a",
type="string",
default="CxiDs2.0:Cspad.0",
dest="address",
help="detector address name (eg CxiDs2.0:Cspad.0)"
).option(
None,
"--detz_offset",
"-d",
type="float",
default=None,
dest="detz_offset",
help=
"offset (in mm) from sample interaction region to back of CSPAD detector rail (CXI), or detector distance (XPP)"
).option(
None,
"--outputdir",
"-o",
type="string",
default=".",
dest="outputdir",
metavar="PATH",
help="Optional path to output directory for output files"
).option(
None,
"--averagebase",
"-A",
type="string",
default="{experiment!l}_avg-r{run:04d}",
dest="averagepath",
metavar="PATH",
help=
"Path to output average image without extension. String substitution allowed"
).option(
None,
"--stddevbase",
"-S",
type="string",
default="{experiment!l}_stddev-r{run:04d}",
dest="stddevpath",
metavar="PATH",
help=
"Path to output standard deviation image without extension. String substitution allowed"
).option(
None,
"--maxbase",
"-M",
type="string",
default="{experiment!l}_max-r{run:04d}",
dest="maxpath",
metavar="PATH",
help=
"Path to output maximum projection image without extension. String substitution allowed"
).option(
None,
"--numevents",
"-n",
type="int",
default=None,
dest="numevents",
help="Maximum number of events to process. Default: all"
).option(
None,
"--skipevents",
"-s",
type="int",
default=0,
dest="skipevents",
help="Number of events in the beginning of the run to skip. Default: 0"
).option(
None,
"--verbose",
"-v",
action="store_true",
default=False,
dest="verbose",
help="Print more information about progress"
).option(
None,
"--pickle-optical-metrology",
"-m",
action="store_true",
default=False,
dest="pickle_optical_metrology",
help=
"If writing pickle files, use the optical metrology in the experiment's calib directory"
).option(
None,
"--bin_size",
"-b",
type="int",
default=None,
dest="bin_size",
help="Rayonix detector bin size"
).option(
None,
"--override_beam_x",
"-X",
type="float",
default=None,
dest="override_beam_x",
help="Rayonix detector beam center x coordinate"
).option(
None,
"--override_beam_y",
"-Y",
type="float",
default=None,
dest="override_beam_y",
help="Rayonix detector beam center y coordinate"
).option(
None,
"--calib_dir",
"-C",
type="string",
default=None,
dest="calib_dir",
metavar="PATH",
help="calibration directory"
).option(
None,
"--pickle_calib_dir",
"-P",
type="string",
default=None,
dest="pickle_calib_dir",
metavar="PATH",
help=
"pickle calibration directory specification. Replaces --calib_dir functionality."
).option(
None,
"--xtc_dir",
"-D",
type="string",
default=None,
dest="xtc_dir",
metavar="PATH",
help="xtc stream directory"
).option(
None,
"--use_ffb",
"-f",
action="store_true",
default=False,
dest="use_ffb",
help=
"Use the fast feedback filesystem at LCLS. Only for the active experiment!"
).option(
None,
"--gain_mask_value",
"-g",
type="float",
default=None,
dest="gain_mask_value",
help=
"Ratio between low and high gain pixels, if CSPAD in mixed-gain mode. Only used in CBF averaging mode."
).option(
None,
"--min",
None,
action="store_true",
default=False,
dest="do_minimum_projection",
help="Output a minimum projection"
).option(
None,
"--minpath",
None,
type="string",
default="{experiment!l}_min-r{run:04d}",
dest="minpath",
metavar="PATH",
help=
"Path to output minimum image without extension. String substitution allowed"
)).process(args=argv)
if len(command_line.args) > 0 or \
command_line.options.as_pickle is None or \
command_line.options.experiment is None or \
command_line.options.run is None or \
command_line.options.address is None or \
command_line.options.detz_offset is None or \
command_line.options.averagepath is None or \
command_line.options.stddevpath is None or \
command_line.options.maxpath is None or \
command_line.options.pickle_optical_metrology is None:
command_line.parser.show_help()
return
# set this to sys.maxint to analyze all events
if command_line.options.numevents is None:
maxevents = sys.maxint
else:
maxevents = command_line.options.numevents
comm = MPI.COMM_WORLD
rank = comm.Get_rank()
size = comm.Get_size()
if command_line.options.config is not None:
psana.setConfigFile(command_line.options.config)
dataset_name = "exp=%s:run=%d:idx" % (command_line.options.experiment,
command_line.options.run)
if command_line.options.xtc_dir is not None:
if command_line.options.use_ffb:
raise Sorry("Cannot specify the xtc_dir and use SLAC's ffb system")
dataset_name += ":dir=%s" % command_line.options.xtc_dir
elif command_line.options.use_ffb:
# as ffb is only at SLAC, ok to hardcode /reg/d here
dataset_name += ":dir=/reg/d/ffb/%s/%s/xtc" % (
command_line.options.experiment[0:3],
command_line.options.experiment)
if command_line.options.calib_dir is not None:
psana.setOption('psana.calib-dir', command_line.options.calib_dir)
ds = psana.DataSource(dataset_name)
address = command_line.options.address
src = psana.Source('DetInfo(%s)' % address)
nevent = np.array([0.])
if command_line.options.background_pickle is not None:
background = easy_pickle.load(
command_line.options.background_pickle)['DATA'].as_numpy_array()
for run in ds.runs():
runnumber = run.run()
if not command_line.options.as_pickle:
psana_det = psana.Detector(address, ds.env())
# list of all events
if command_line.options.skipevents > 0:
print "Skipping first %d events" % command_line.options.skipevents
elif "Rayonix" in command_line.options.address:
print "Skipping first image in the Rayonix detector" # Shuttering issue
command_line.options.skipevents = 1
times = run.times()[command_line.options.skipevents:]
nevents = min(len(times), maxevents)
# chop the list into pieces, depending on rank. This assigns each process
# events such that the get every Nth event where N is the number of processes
mytimes = [times[i] for i in xrange(nevents) if (i + rank) % size == 0]
for i in xrange(len(mytimes)):
if i % 10 == 0:
print 'Rank', rank, 'processing event', rank * len(
mytimes) + i, ', ', i, 'of', len(mytimes)
evt = run.event(mytimes[i])
#print "Event #",rank*mylength+i," has id:",evt.get(EventId)
if 'Rayonix' in command_line.options.address or 'FeeHxSpectrometer' in command_line.options.address or 'XrayTransportDiagnostic' in command_line.options.address:
data = evt.get(psana.Camera.FrameV1, src)
if data is None:
print "No data"
continue
data = data.data16().astype(np.float64)
elif command_line.options.as_pickle:
data = evt.get(psana.ndarray_float64_3, src, 'image0')
else:
# get numpy array, 32x185x388
from xfel.cftbx.detector.cspad_cbf_tbx import get_psana_corrected_data
if command_line.options.raw_data:
data = get_psana_corrected_data(psana_det,
evt,
use_default=False,
dark=False,
common_mode=None,
apply_gain_mask=False,
per_pixel_gain=False)
else:
if command_line.options.gain_mask_value is None:
data = get_psana_corrected_data(psana_det,
evt,
use_default=True)
else:
data = get_psana_corrected_data(
psana_det,
evt,
use_default=False,
dark=True,
common_mode=None,
apply_gain_mask=True,
gain_mask_value=command_line.options.
gain_mask_value,
per_pixel_gain=False)
if data is None:
print "No data"
continue
if command_line.options.background_pickle is not None:
data -= background
if 'FeeHxSpectrometer' in command_line.options.address or 'XrayTransportDiagnostic' in command_line.options.address:
distance = np.array([0.0])
wavelength = np.array([1.0])
else:
d = cspad_tbx.env_distance(address, run.env(),
command_line.options.detz_offset)
if d is None:
print "No distance, using distance", command_line.options.detz_offset
assert command_line.options.detz_offset is not None
if 'distance' not in locals():
distance = np.array([command_line.options.detz_offset])
else:
distance += command_line.options.detz_offset
else:
if 'distance' in locals():
distance += d
else:
distance = np.array([float(d)])
w = cspad_tbx.evt_wavelength(evt)
if w is None:
print "No wavelength"
if 'wavelength' not in locals():
wavelength = np.array([1.0])
else:
if 'wavelength' in locals():
wavelength += w
else:
wavelength = np.array([w])
t = cspad_tbx.evt_time(evt)
if t is None:
print "No timestamp, skipping shot"
continue
if 'timestamp' in locals():
timestamp += t[0] + (t[1] / 1000)
else:
timestamp = np.array([t[0] + (t[1] / 1000)])
if 'sum' in locals():
sum += data
else:
sum = np.array(data, copy=True)
if 'sumsq' in locals():
sumsq += data * data
else:
sumsq = data * data
if 'maximum' in locals():
maximum = np.maximum(maximum, data)
else:
maximum = np.array(data, copy=True)
if command_line.options.do_minimum_projection:
if 'minimum' in locals():
minimum = np.minimum(minimum, data)
else:
minimum = np.array(data, copy=True)
nevent += 1
#sum the images across mpi cores
if size > 1:
print "Synchronizing rank", rank
totevent = np.zeros(nevent.shape)
comm.Reduce(nevent, totevent)
if rank == 0 and totevent[0] == 0:
raise Sorry("No events found in the run")
sumall = np.zeros(sum.shape).astype(sum.dtype)
comm.Reduce(sum, sumall)
sumsqall = np.zeros(sumsq.shape).astype(sumsq.dtype)
comm.Reduce(sumsq, sumsqall)
maxall = np.zeros(maximum.shape).astype(maximum.dtype)
comm.Reduce(maximum, maxall, op=MPI.MAX)
if command_line.options.do_minimum_projection:
minall = np.zeros(maximum.shape).astype(minimum.dtype)
comm.Reduce(minimum, minall, op=MPI.MIN)
waveall = np.zeros(wavelength.shape).astype(wavelength.dtype)
comm.Reduce(wavelength, waveall)
distall = np.zeros(distance.shape).astype(distance.dtype)
comm.Reduce(distance, distall)
timeall = np.zeros(timestamp.shape).astype(timestamp.dtype)
comm.Reduce(timestamp, timeall)
if rank == 0:
if size > 1:
print "Synchronized"
# Accumulating floating-point numbers introduces errors,
# which may cause negative variances. Since a two-pass
# approach is unacceptable, the standard deviation is
# clamped at zero.
mean = sumall / float(totevent[0])
variance = (sumsqall / float(totevent[0])) - (mean**2)
variance[variance < 0] = 0
stddev = np.sqrt(variance)
wavelength = waveall[0] / totevent[0]
distance = distall[0] / totevent[0]
pixel_size = cspad_tbx.pixel_size
saturated_value = cspad_tbx.cspad_saturated_value
timestamp = timeall[0] / totevent[0]
timestamp = (int(timestamp), timestamp % int(timestamp) * 1000)
timestamp = cspad_tbx.evt_timestamp(timestamp)
if command_line.options.as_pickle:
extension = ".pickle"
else:
extension = ".cbf"
dest_paths = [
cspad_tbx.pathsubst(command_line.options.averagepath + extension,
evt, ds.env()),
cspad_tbx.pathsubst(command_line.options.stddevpath + extension,
evt, ds.env()),
cspad_tbx.pathsubst(command_line.options.maxpath + extension, evt,
ds.env())
]
if command_line.options.do_minimum_projection:
dest_paths.append(
cspad_tbx.pathsubst(command_line.options.minpath + extension,
evt, ds.env()))
dest_paths = [
os.path.join(command_line.options.outputdir, path)
for path in dest_paths
]
if 'Rayonix' in command_line.options.address:
all_data = [mean, stddev, maxall]
if command_line.options.do_minimum_projection:
all_data.append(minall)
from xfel.cxi.cspad_ana import rayonix_tbx
pixel_size = rayonix_tbx.get_rayonix_pixel_size(
command_line.options.bin_size)
beam_center = [
command_line.options.override_beam_x,
command_line.options.override_beam_y
]
detector_dimensions = rayonix_tbx.get_rayonix_detector_dimensions(
command_line.options.bin_size)
active_areas = flex.int(
[0, 0, detector_dimensions[0], detector_dimensions[1]])
split_address = cspad_tbx.address_split(address)
old_style_address = split_address[0] + "-" + split_address[
1] + "|" + split_address[2] + "-" + split_address[3]
for data, path in zip(all_data, dest_paths):
print "Saving", path
d = cspad_tbx.dpack(
active_areas=active_areas,
address=old_style_address,
beam_center_x=pixel_size * beam_center[0],
beam_center_y=pixel_size * beam_center[1],
data=flex.double(data),
distance=distance,
pixel_size=pixel_size,
saturated_value=rayonix_tbx.rayonix_saturated_value,
timestamp=timestamp,
wavelength=wavelength)
easy_pickle.dump(path, d)
elif 'FeeHxSpectrometer' in command_line.options.address or 'XrayTransportDiagnostic' in command_line.options.address:
all_data = [mean, stddev, maxall]
split_address = cspad_tbx.address_split(address)
old_style_address = split_address[0] + "-" + split_address[
1] + "|" + split_address[2] + "-" + split_address[3]
if command_line.options.do_minimum_projection:
all_data.append(minall)
for data, path in zip(all_data, dest_paths):
d = cspad_tbx.dpack(address=old_style_address,
data=flex.double(data),
distance=distance,
pixel_size=0.1,
timestamp=timestamp,
wavelength=wavelength)
print "Saving", path
easy_pickle.dump(path, d)
elif command_line.options.as_pickle:
split_address = cspad_tbx.address_split(address)
old_style_address = split_address[0] + "-" + split_address[
1] + "|" + split_address[2] + "-" + split_address[3]
xpp = 'xpp' in address.lower()
if xpp:
evt_time = cspad_tbx.evt_time(
evt) # tuple of seconds, milliseconds
timestamp = cspad_tbx.evt_timestamp(
evt_time) # human readable format
from iotbx.detectors.cspad_detector_formats import detector_format_version, reverse_timestamp
from xfel.cxi.cspad_ana.cspad_tbx import xpp_active_areas
version_lookup = detector_format_version(
old_style_address,
reverse_timestamp(timestamp)[0])
assert version_lookup is not None
active_areas = xpp_active_areas[version_lookup]['active_areas']
beam_center = [1765 // 2, 1765 // 2]
else:
if command_line.options.pickle_calib_dir is not None:
metro_path = command_line.options.pickle_calib_dir
elif command_line.options.pickle_optical_metrology:
from xfel.cftbx.detector.cspad_cbf_tbx import get_calib_file_path
metro_path = get_calib_file_path(run.env(), address, run)
else:
metro_path = libtbx.env.find_in_repositories(
"xfel/metrology/CSPad/run4/CxiDs1.0_Cspad.0")
sections = parse_calib.calib2sections(metro_path)
beam_center, active_areas = cspad_tbx.cbcaa(
cspad_tbx.getConfig(address, ds.env()), sections)
class fake_quad(object):
def __init__(self, q, d):
self.q = q
self.d = d
def quad(self):
return self.q
def data(self):
return self.d
if xpp:
quads = [
fake_quad(i, mean[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
mean = cspad_tbx.image_xpp(old_style_address,
None,
ds.env(),
active_areas,
quads=quads)
mean = flex.double(mean.astype(np.float64))
quads = [
fake_quad(i, stddev[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
stddev = cspad_tbx.image_xpp(old_style_address,
None,
ds.env(),
active_areas,
quads=quads)
stddev = flex.double(stddev.astype(np.float64))
quads = [
fake_quad(i, maxall[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
maxall = cspad_tbx.image_xpp(old_style_address,
None,
ds.env(),
active_areas,
quads=quads)
maxall = flex.double(maxall.astype(np.float64))
if command_line.options.do_minimum_projection:
quads = [
fake_quad(i, minall[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
minall = cspad_tbx.image_xpp(old_style_address,
None,
ds.env(),
active_areas,
quads=quads)
minall = flex.double(minall.astype(np.float64))
else:
quads = [
fake_quad(i, mean[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
mean = cspad_tbx.CsPadDetector(address,
evt,
ds.env(),
sections,
quads=quads)
mean = flex.double(mean.astype(np.float64))
quads = [
fake_quad(i, stddev[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
stddev = cspad_tbx.CsPadDetector(address,
evt,
ds.env(),
sections,
quads=quads)
stddev = flex.double(stddev.astype(np.float64))
quads = [
fake_quad(i, maxall[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
maxall = cspad_tbx.CsPadDetector(address,
evt,
ds.env(),
sections,
quads=quads)
maxall = flex.double(maxall.astype(np.float64))
if command_line.options.do_minimum_projection:
quads = [
fake_quad(i, minall[i * 8:(i + 1) * 8, :, :])
for i in xrange(4)
]
minall = cspad_tbx.CsPadDetector(address,
evt,
ds.env(),
sections,
quads=quads)
minall = flex.double(minall.astype(np.float64))
all_data = [mean, stddev, maxall]
if command_line.options.do_minimum_projection:
all_data.append(minall)
for data, path in zip(all_data, dest_paths):
print "Saving", path
d = cspad_tbx.dpack(active_areas=active_areas,
address=old_style_address,
beam_center_x=pixel_size * beam_center[0],
beam_center_y=pixel_size * beam_center[1],
data=data,
distance=distance,
pixel_size=pixel_size,
saturated_value=saturated_value,
timestamp=timestamp,
wavelength=wavelength)
easy_pickle.dump(path, d)
else:
# load a header only cspad cbf from the slac metrology
from xfel.cftbx.detector import cspad_cbf_tbx
import pycbf
base_dxtbx = cspad_cbf_tbx.env_dxtbx_from_slac_metrology(
run, address)
if base_dxtbx is None:
raise Sorry("Couldn't load calibration file for run %d" %
run.run())
all_data = [mean, stddev, maxall]
if command_line.options.do_minimum_projection:
all_data.append(minall)
for data, path in zip(all_data, dest_paths):
print "Saving", path
cspad_img = cspad_cbf_tbx.format_object_from_data(
base_dxtbx,
data,
distance,
wavelength,
timestamp,
address,
round_to_int=False)
cspad_img._cbf_handle.write_widefile(path, pycbf.CBF,\
pycbf.MIME_HEADERS|pycbf.MSG_DIGEST|pycbf.PAD_4K, 0)
