Exemple #1
0
 def read_fillMode(self, attr):
     mode = _MerlinCamera.getFillMode()
     attr.set_value(AttrHelper._getDictKey(self.__FillMode, mode))
Exemple #2
0
 def read_triggerOutTTL(self, attr):
     trigout = _MerlinCamera.getTriggerOutTTL()
     attr.set_value(AttrHelper._getDictKey(self.__TriggerOutput, trigout))
Exemple #3
0
 def read_triggerUseDelay(self, attr):
     mode = _MerlinCamera.getTriggerUseDelay()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #4
0
 def read_output2_id(self, attr):        
     id = _RayonixHsInterface.getOutputSignalID(RayonixHsAcq.CHANNEL_2)
     val = AttrHelper._getDictKey(self.__OutputSignalID, id)
     attr.set_value(val)
Exemple #5
0
 def read_gain(self, attr):
     gain = _MerlinCamera.getGain()
     attr.set_value(AttrHelper._getDictKey(self.__GainSetting, gain))
Exemple #6
0
 def read_counter(self, attr):
     counter = _MerlinCamera.getEnableCounters()
     attr.set_value(AttrHelper._getDictKey(self.__Counter,counter))
Exemple #7
0
 def read_triggerOutTTL(self, attr):
     trigout = _MerlinCamera.getTriggerOutTTL()
     attr.set_value(AttrHelper._getDictKey(self.__TriggerOutput,trigout))
Exemple #8
0
 def read_triggered(self, attr):
     mode = _Mythen3Camera.getTriggered()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #9
0
 def read_outputSignalPolarity(self, attr):
     mode = _Mythen3Camera.getOutputSignalPolarity()
     attr.set_value(AttrHelper._getDictKey(self.__Polarity, mode))
Exemple #10
0
 def read_continuousTrigger(self, attr):
     mode = _Mythen3Camera.getContinuousTrigger()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #11
0
 def read_gateMode(self, attr):
     mode = _Mythen3Camera.getGateMode()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #12
0
 def read_rateCorrection(self, attr):
     mode = _Mythen3Camera.getRateCorrection()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #13
0
 def read_badChannelInterpolation(self, attr):
     mode = _Mythen3Camera.getBadChannelInterpolation()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #14
0
 def read_hwStatus(self, attr):
     status = _Mythen3Camera.getHwStatus()
     attr.set_value(AttrHelper._getDictKey(self.__Status, status))
Exemple #15
0
 def read_output2_signal_type(self, attr):
     sig_type = _RayonixHsInterface.getOutputSignalType(
         RayonixHsAcq.CHANNEL_2)
     val = AttrHelper._getDictKey(self.__OutputSignalType, sig_type)
     attr.set_value(val)
Exemple #16
0
 def read_useRawReadout(self, attr):
     mode = _Mythen3Camera.getUseRawReadout()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #17
0
 def read_colourMode(self, attr):
     mode = _MerlinCamera.getColourMode()
     attr.set_value(AttrHelper._getDictKey(self.__ColourMode,mode))
Exemple #18
0
 def read_nbits(self, attr):
     nbits = _Mythen3Camera.getNbits()
     attr.set_value(AttrHelper._getDictKey(self.__Nbits, nbits))
Exemple #19
0
 def read_gain(self, attr):
     gain = _MerlinCamera.getGain()
     attr.set_value(AttrHelper._getDictKey(self.__GainSetting,gain))
Exemple #20
0
 def read_hwStatus(self, attr):
     status = _Mythen3Camera.getHwStatus()
     attr.set_value(AttrHelper._getDictKey(self.__Status, status))
Exemple #21
0
 def read_triggerUseDelay(self, attr):
     mode = _MerlinCamera.getTriggerUseDelay()
     attr.set_value(AttrHelper._getDictKey(self.__Switch,mode))
Exemple #22
0
 def read_badChannelInterpolation(self, attr):
     mode = _Mythen3Camera.getBadChannelInterpolation()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #23
0
 def read_nbits(self, attr):
     nbits = _Mythen3Camera.getNbits()
     attr.set_value(AttrHelper._getDictKey(self.__Nbits, nbits))
Exemple #24
0
 def read_rateCorrection(self, attr):
     mode = _Mythen3Camera.getRateCorrection()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #25
0
 def read_triggerStopType(self, attr):
     trig = _MerlinCamera.getTriggerStopType()
     attr.set_value(AttrHelper._getDictKey(self.__Trigger, trig))
Exemple #26
0
 def read_continuousTrigger(self, attr):
     mode = _Mythen3Camera.getContinuousTrigger()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #27
0
 def read_triggerOutLVDSInvert(self, attr):
     trigout = _MerlinCamera.getTriggerOutLVDSInvert()
     attr.set_value(AttrHelper._getDictKey(self.__TriggerLevel, trigout))
Exemple #28
0
 def read_gateMode(self, attr):
     mode = _Mythen3Camera.getGateMode()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #29
0
 def read_fileEnable(self, attr):
     mode = _MerlinCamera.getFileEnable()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #30
0
 def read_triggered(self, attr):
     mode = _Mythen3Camera.getTriggered()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #31
0
 def read_output2_id(self, attr):
     id = _RayonixHsInterface.getOutputSignalID(RayonixHsAcq.CHANNEL_2)
     val = AttrHelper._getDictKey(self.__OutputSignalID, id)
     attr.set_value(val)
Exemple #32
0
 def read_outputSignalPolarity(self, attr):
     mode = _Mythen3Camera.getOutputSignalPolarity()
     attr.set_value(AttrHelper._getDictKey(self.__Polarity, mode))
Exemple #33
0
 def read_chargeSumming(self, attr):
     mode = _MerlinCamera.getChargeSumming()
     attr.set_value(AttrHelper._getDictKey(self.__Switch,mode))
Exemple #34
0
 def read_useRawReadout(self, attr):
     mode = _Mythen3Camera.getUseRawReadout()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #35
0
 def read_continuousRW(self, attr):
     mode = _MerlinCamera.getContinuousRW()
     attr.set_value(AttrHelper._getDictKey(self.__Switch,mode))
Exemple #36
0
 def read_chargeSumming(self, attr):
     mode = _MerlinCamera.getChargeSumming()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #37
0
 def read_depth(self, attr):
     depth = _MerlinCamera.getCounterDepth()
     attr.set_value(AttrHelper._getDictKey(self.__Depth,depth))
Exemple #38
0
 def read_colourMode(self, attr):
     mode = _MerlinCamera.getColourMode()
     attr.set_value(AttrHelper._getDictKey(self.__ColourMode, mode))
Exemple #39
0
 def read_triggerStopType(self, attr):
     trig = _MerlinCamera.getTriggerStopType()
     attr.set_value(AttrHelper._getDictKey(self.__Trigger,trig))
Exemple #40
0
 def read_continuousRW(self, attr):
     mode = _MerlinCamera.getContinuousRW()
     attr.set_value(AttrHelper._getDictKey(self.__Switch, mode))
Exemple #41
0
 def read_triggerOutLVDSInvert(self, attr):
     trigout = _MerlinCamera.getTriggerOutLVDSInvert()
     attr.set_value(AttrHelper._getDictKey(self.__TriggerLevel,trigout))
Exemple #42
0
 def read_counter(self, attr):
     counter = _MerlinCamera.getEnableCounters()
     attr.set_value(AttrHelper._getDictKey(self.__Counter, counter))
Exemple #43
0
 def read_fileEnable(self, attr):
     mode = _MerlinCamera.getFileEnable()
     attr.set_value(AttrHelper._getDictKey(self.__Switch,mode))
Exemple #44
0
 def read_depth(self, attr):
     depth = _MerlinCamera.getCounterDepth()
     attr.set_value(AttrHelper._getDictKey(self.__Depth, depth))
Exemple #45
0
 def read_output2_signal_type(self, attr):        
     sig_type = _RayonixHsInterface.getOutputSignalType(RayonixHsAcq.CHANNEL_2)
     val = AttrHelper._getDictKey(self.__OutputSignalType, sig_type)
     attr.set_value(val)
Exemple #46
0
 def read_fillMode(self, attr):
     mode = _MerlinCamera.getFillMode()
     attr.set_value(AttrHelper._getDictKey(self.__FillMode,mode))