def main():
pipeInnerInput = Blender.Draw.Create(48)
pipeOuterInput = Blender.Draw.Create(50)
pipeDivInput = Blender.Draw.Create(64)
pipeHDivInput = Blender.Draw.Create(1)
pipeRDivInput = Blender.Draw.Create(1)
pipeHeightInput = Blender.Draw.Create(1.0)
block = []
block.append(
("Inner radius:", pipeInnerInput, 0.01, 100, "the inner radius"))
block.append(
("Outer radius:", pipeOuterInput, 0.01, 100, "the outer radius"))
block.append(("Divisions:", pipeDivInput, 4, 100, "number of divisions"))
block.append(
("Height:", pipeHeightInput, 1.00, 100, "the height of the pipe"))
block.append(("Height divisions:", pipeHDivInput, 1, 100,
"number of height divisions"))
block.append(("Radial divisions:", pipeRDivInput, 1, 100,
"number of radial divisions"))
if not Blender.Draw.PupBlock("Lay pipe", block):
return
# Generates the mesh
verts, faces = add_pipe(pipeDivInput.val, pipeHDivInput.val,
pipeRDivInput.val, pipeInnerInput.val,
pipeOuterInput.val, pipeHeightInput.val)
# Adds the mesh to the scene
BPyAddMesh.add_mesh_simple('Pipe', verts, [], faces)
def main():
Draw = Blender.Draw
PREF_MAJOR_RAD = Draw.Create(1.0)
PREF_MINOR_RAD = Draw.Create(0.1)
PREF_OFFSET = Draw.Create(0.0)
PREF_SEG = Draw.Create(36)
if not Draw.PupBlock('Add Cylinder Intersection', [\
('Major Radius:', PREF_MAJOR_RAD, 0.001, 10000, 'Radius for the bigger cylinder'),\
('Minor Radius:', PREF_MINOR_RAD, 0.001, 10000, 'Radius for the smaller cylinder'),\
('Axis Offset:', PREF_OFFSET, 0.000, 10000, 'Axix offset between smaller and bigger cylinder'),\
('Segments:', PREF_SEG, 3, 256, 'Number of segments for the intersection (circle)'),\
]):
return
verts, faces = add_cylinters(PREF_MAJOR_RAD.val, PREF_MINOR_RAD.val, PREF_OFFSET.val, PREF_SEG.val)
BPyAddMesh.add_mesh_simple('CylInters', verts, [], faces)
def main():
Draw = Blender.Draw
PREF_MAJOR_RAD = Draw.Create(1.0)
PREF_MINOR_RAD = Draw.Create(0.25)
PREF_MAJOR_SEG = Draw.Create(48)
PREF_MINOR_SEG = Draw.Create(16)
if not Draw.PupBlock('Add Torus', [\
('Major Radius:', PREF_MAJOR_RAD, 0.01, 100, 'Radius for the main ring of the torus'),\
('Minor Radius:', PREF_MINOR_RAD, 0.01, 100, 'Radius for the minor ring of the torus setting the thickness of the ring'),\
('Major Segments:', PREF_MAJOR_SEG, 3, 256, 'Number of segments for the main ring of the torus'),\
('Minor Segments:', PREF_MINOR_SEG, 3, 256, 'Number of segments for the minor ring of the torus'),\
]):
return
verts, faces = add_torus(PREF_MAJOR_RAD.val, PREF_MINOR_RAD.val, PREF_MAJOR_SEG.val, PREF_MINOR_SEG.val)
BPyAddMesh.add_mesh_simple('Torus', verts, [], faces)
def main():
Draw = Blender.Draw
PREF_MAJOR_RAD = Draw.Create(1.0)
PREF_MINOR_RAD = Draw.Create(0.25)
PREF_MAJOR_SEG = Draw.Create(48)
PREF_MINOR_SEG = Draw.Create(16)
if not Draw.PupBlock('Add Torus', [\
('Major Radius:', PREF_MAJOR_RAD, 0.01, 100, 'Radius for the main ring of the torus'),\
('Minor Radius:', PREF_MINOR_RAD, 0.01, 100, 'Radius for the minor ring of the torus setting the thickness of the ring'),\
('Major Segments:', PREF_MAJOR_SEG, 3, 256, 'Number of segments for the main ring of the torus'),\
('Minor Segments:', PREF_MINOR_SEG, 3, 256, 'Number of segments for the minor ring of the torus'),\
]):
return
verts, faces = add_torus(PREF_MAJOR_RAD.val, PREF_MINOR_RAD.val, PREF_MAJOR_SEG.val, PREF_MINOR_SEG.val)
BPyAddMesh.add_mesh_simple('Torus', verts, [], faces)
def readGmsh2(filename):
Blender.Window.WaitCursor(1)
Vector = Blender.Mathutils.Vector
file = open(filename, 'r')
line = file.readline()
line = file.readline()
line = file.readline()
line = file.readline()
line = file.readline()
words = line.split()
if len(words) != 1:
Blender.Draw.PupMenu('Error%t|File format error 1')
return
num_nodes = int(float(words[0]))
verts = []
for i in range(0, num_nodes):
line = file.readline()
words = line.split()
if len(words) != 4:
Blender.Draw.PupMenu('Error%t|File format error 2')
return
x = float(words[1])
y = float(words[2])
z = float(words[3])
verts.append(Vector(x, y, z))
line = file.readline()
line = file.readline()
line = file.readline()
words = line.split()
if len(words) != 1:
Blender.Draw.PupMenu('Error%t|File format error 3')
return
num_elements = int(float(words[0]))
faces = []
for i in range(0, num_elements):
line = file.readline()
words = line.split()
if len(words) < 3:
Blender.Draw.PupMenu('Error%t|File format error 4')
return
element_type = int(float(words[1]))
num_tags = int(float(words[2]))
read_element = 0
if element_type == 2:
if len(words) != 3 + 3 + num_tags:
Blender.Draw.PupMenu('Error%t|File format error 5')
return
read_element = 1
if element_type == 3:
if len(words) != 3 + 4 + num_tags:
Blender.Draw.PupMenu('Error%t|File format error 6')
return
read_element = 1
if read_element == 1:
face_verts = []
for j in range(3 + num_tags, len(words)):
idx = int(float(words[j])) - 1
face_verts.append(idx)
faces.append(face_verts)
BPyAddMesh.add_mesh_simple('gmsh_object', verts, [], faces)
Blender.Window.WaitCursor(0)
Blender.Window.RedrawAll()
def readGmsh2(filename):
Blender.Window.WaitCursor(1)
#mesh = Blender.NMesh.New()
Vector = Blender.Mathutils.Vector
file = open(filename, 'r')
line = file.readline()
line = file.readline()
line = file.readline()
line = file.readline()
line = file.readline()
words = line.split()
if len(words) != 1:
Blender.Draw.PupMenu('Error%t|File format error 1')
return
num_nodes = int(float(words[0]))
verts = []
for i in range(0, num_nodes):
line = file.readline()
words = line.split()
if len(words) != 4:
Blender.Draw.PupMenu('Error%t|File format error 2')
return
x = float(words[1])
y = float(words[2])
z = float(words[3])
verts.append( Vector(x,y,z) )
line = file.readline()
line = file.readline()
line = file.readline()
words = line.split()
if len(words) != 1:
Blender.Draw.PupMenu('Error%t|File format error 3')
return
num_elements = int(float(words[0]))
faces = []
for i in range(0, num_elements):
line = file.readline()
words = line.split()
if len(words) < 3:
Blender.Draw.PupMenu('Error%t|File format error 4')
return
element_type = int(float(words[1]))
num_tags = int(float(words[2]))
read_element = 0
if element_type == 2:
if len(words) != 3 + 3 + num_tags:
Blender.Draw.PupMenu('Error%t|File format error 5')
return
read_element = 1
if element_type == 3:
if len(words) != 3 + 4 + num_tags:
Blender.Draw.PupMenu('Error%t|File format error 6')
return
read_element = 1
if read_element == 1:
face_verts = []
for j in range(3+num_tags, len(words)):
idx = int(float(words[j])) - 1
face_verts.append(idx)
faces.append(face_verts)
BPyAddMesh.add_mesh_simple('gmsh_object', verts, [], faces)
Blender.Window.WaitCursor(0)
Blender.Window.RedrawAll()
def main():
BPyAddMesh.add_mesh_simple('EmptyMesh', [], [], [])
sce = bpy.data.scenes.active for k,v in d.items(): y = 0.0 x = 0.0 z = 0.0 x2 = v.duration y2 = v.velocity/64; str = '' for n in v.name: str += n #print(x,x2,y,y2,str,v.name) verts, faces = add_mymesh(x,x2,y,y2) BPyAddMesh.add_mesh_simple(str, verts, [], faces) timeline = v.start time = v.start * 25 duration = v.duration * 25 vel = v.velocity pitch = v.pitch channel = v.channel obj = Blender.Object.Get(str) if obj: temp = obj.getLocation() temp = [timeline + temp[0], ((channel-1))*2.169 + temp[1], v.velocity/127] print temp
def readEngrid(filename):
Blender.Window.WaitCursor(1)
Vector = Blender.Mathutils.Vector
in_file = file(filename, "r")
line = in_file.readline()
Nobjects = int(line)
#print "Nobjects=",Nobjects
object_names = []
for i in range(0, Nobjects):
line = in_file.readline()
object_names.append(line.strip())
#print "object_names=",object_names
global_verts = []
offset = 0
for i_object in range(0, Nobjects):
line = in_file.readline()
words = line.split()
Nverts = int(words[0])
Nfaces = int(words[1])
#print "Nverts=",Nverts
#print "Nfaces=",Nfaces
local_verts = []
for i_vert in range(0, Nverts):
line = in_file.readline()
words = line.split()
x = float(words[0])
y = float(words[1])
z = float(words[2])
#print "x,y,z=",x,y,z
local_verts.append(Vector(x, y, z))
global_verts.append(Vector(x, y, z))
faces = []
for i_face in range(0, Nfaces):
line = in_file.readline()
words = line.split()
if len(words) < 3:
Blender.Draw.PupMenu('Error%t|File format error 4')
return
Nverts_in_face = int(words[0])
if len(words) != 1 + Nverts_in_face:
Blender.Draw.PupMenu('Error%t|File format error 5')
return
face_verts = []
for i_face_vert in range(0, Nverts_in_face):
idx = int(words[i_face_vert + 1]) - offset
face_verts.append(idx)
#print "face_verts=",face_verts
faces.append(face_verts)
#print "Adding object ",object_names[i_object]
BPyAddMesh.add_mesh_simple(object_names[i_object], local_verts, [],
faces)
offset += Nverts
in_file.close()
Blender.Window.WaitCursor(0)
Blender.Window.RedrawAll()
def readEngrid(filename):
Blender.Window.WaitCursor(1)
Vector = Blender.Mathutils.Vector
in_file = file(filename, "r")
line = in_file.readline()
Nobjects = int(line)
#print "Nobjects=",Nobjects
object_names = []
for i in range(0, Nobjects):
line = in_file.readline()
object_names.append(line.strip())
#print "object_names=",object_names
global_verts = []
offset = 0
for i_object in range(0, Nobjects):
line = in_file.readline()
words = line.split()
Nverts = int(words[0])
Nfaces = int(words[1])
#print "Nverts=",Nverts
#print "Nfaces=",Nfaces
local_verts = []
for i_vert in range(0, Nverts):
line = in_file.readline()
words = line.split()
x = float(words[0])
y = float(words[1])
z = float(words[2])
#print "x,y,z=",x,y,z
local_verts.append( Vector(x,y,z) )
global_verts.append( Vector(x,y,z) )
faces = []
for i_face in range(0, Nfaces):
line = in_file.readline()
words = line.split()
if len(words) < 3:
Blender.Draw.PupMenu('Error%t|File format error 4')
return
Nverts_in_face = int(words[0])
if len(words) != 1 + Nverts_in_face:
Blender.Draw.PupMenu('Error%t|File format error 5')
return
face_verts = []
for i_face_vert in range(0, Nverts_in_face):
idx = int(words[i_face_vert + 1]) - offset
face_verts.append(idx)
#print "face_verts=",face_verts
faces.append(face_verts)
#print "Adding object ",object_names[i_object]
BPyAddMesh.add_mesh_simple(object_names[i_object], local_verts, [], faces)
offset += Nverts
in_file.close()
Blender.Window.WaitCursor(0)
Blender.Window.RedrawAll()
def main():
BPyAddMesh.add_mesh_simple('EmptyMesh', [], [], [])