# Netmax switch example with iot port good one :)
import time
import Netmaxiot
# Connect the Netmaxiot Switch to digital port D3
# SIG,NC,VCC,GND
switch = 3
# Connect the Netmaxiot Relay to digital port D4
# SIG,NC,VCC,GND
relay = 4
Netmaxiot.pinMode(switch,"INPUT")
Netmaxiot.pinMode(relay,"OUTPUT")
while True:
try:
if Netmaxiot.digitalRead(switch):
Netmaxiot.digitalWrite(relay,1)
else:
Netmaxiot.digitalWrite(relay,0)
time.sleep(.5)
except KeyboardInterrupt:
Netmaxiot.digitalWrite(relay,0)
break
except IOError:
print ("Error")
import Netmaxiot
import time
# Netmaxiot.pinMode(2,"INPUT")
# Netmaxiot.pinMode(5,"OUTPUT")
# Netmaxiot.pinMode(6,"OUTPUT")
# Netmaxiot.pinMode(7,"OUTPUT")
a = [2, 3, 4, 5, 6, 7]
i = 0
for i in range(0, 6):
Netmaxiot.pinMode(a[i], "OUTPUT")
i = 0
while 1:
for i in range(0, 6):
print("LED ON ###############################")
Netmaxiot.digitalWrite(a[i], 1)
time.sleep(0.5)
print("LED OFF ##############################")
Netmaxiot.digitalWrite(a[i], 0)
time.sleep(0.5)
# while 1:
# a=Netmaxiot.digitalRead(2)
# if(a==1):
# print "led on............."
# Netmaxiot.digitalWrite(5,1)
# time.sleep(0.2)
# Netmaxiot.digitalWrite(6,1)
# time.sleep(0.2)
# Netmaxiot.digitalWrite(7,1)
# time.sleep(1)
# else:
#!/usr/bin/env python
import time
import Netmaxiot
Netmaxiot.pinMode(2, "OUTPUT")
Netmaxiot.pinMode(3, "OUTPUT")
Netmaxiot.pinMode(4, "OUTPUT")
Netmaxiot.pinMode(5, "OUTPUT")
Netmaxiot.pinMode(6, "OUTPUT")
time.sleep(1)
i = 0
try:
Netmaxiot.digitalWrite(2, 0)
Netmaxiot.digitalWrite(3, 0)
Netmaxiot.digitalWrite(4, 0)
Netmaxiot.analogWrite(3, 255)
time.sleep(2)
Netmaxiot.analogWrite(3, 128)
time.sleep(2)
while True:
print(i)
Netmaxiot.analogWrite(3, i)
Netmaxiot.analogWrite(5, i)
Netmaxiot.analogWrite(6, i)
i = i + 5
time.sleep(0.05)
if i > 255:
i = 0
except KeyboardInterrupt:
Netmaxiot.analogWrite(3, 0)
# SIG,NC,VCC,GND
led = 4
# Turn on LED once sensor exceeds threshold resistance
threshold = 10
Netmaxiot.pinMode(light_sensor, "INPUT")
Netmaxiot.pinMode(led, "OUTPUT")
while True:
try:
# Get sensor value
sensor_value = Netmaxiot.analogRead(light_sensor)
# Calculate resistance of sensor in K
resistance = (float)(1023 - sensor_value) * 10 / sensor_value
if resistance > threshold:
# Send HIGH to switch on LED
Netmaxiot.digitalWrite(led, 1)
else:
# Send LOW to switch off LED
Netmaxiot.digitalWrite(led, 0)
print("sensor_value = %d resistance =%.2f" %
(sensor_value, resistance))
time.sleep(.5)
except IOError:
print("Error")
import Netmaxiot
from time import sleep
pins = [2, 3, 4, 5, 6, 7]
for i in range(0, 6):
Netmaxiot.pinMode(pins[i], "OUTPUT")
while True:
for i in range(0, 6):
Netmaxiot.digitalWrite(pins[i], 1)
sleep(0.1)
print i
sleep(2)
for i in range(5, -1, -1):
Netmaxiot.digitalWrite(pins[i], 0)
sleep(0.1)
print i
sleep(2)
#!/usr/bin/env python
import Netmaxiot
import time
Netmaxiot.pinMode(5,"OUTPUT")
Netmaxiot.pinMode(6,"OUTPUT")
Netmaxiot.pinMode(7,"OUTPUT")
try:
while 1:
print("led on................................")
Netmaxiot.digitalWrite(5,1)
time.sleep(0.2)
Netmaxiot.digitalWrite(6,1)
time.sleep(0.2)
Netmaxiot.digitalWrite(7,1)
time.sleep(1)
print("led off...............................")
Netmaxiot.digitalWrite(5,0)
time.sleep(0.2)
Netmaxiot.digitalWrite(6,0)
time.sleep(0.2)
Netmaxiot.digitalWrite(7,0)
time.sleep(1)
except:
print("Error !!! Please Check Your Connections")
import Netmaxiot
from time import sleep
led=3
led1=5
led2=6
Netmaxiot.pinMode(led,"OUTPUT")
Netmaxiot.pinMode(led1,"OUTPUT")
Netmaxiot.pinMode(led2,"OUTPUT")
sleep(1)
i=0
try:
Netmaxiot.digitalWrite(led,0)
Netmaxiot.digitalWrite(led1,0)
Netmaxiot.digitalWrite(led2,0)
while 1:
print(i)
print("analog pin 3,5,6,9")
Netmaxiot.analogWrite(led,i)
Netmaxiot.analogWrite(led1,i)
Netmaxiot.analogWrite(led2,i)
i=i+5
sleep(0.05)
if(i>255):
i=0
except KeyboardInterrupt:
Netmaxiot.digitalWrite(led,0)
Netmaxiot.digitalWrite(led1,0)
Netmaxiot.digitalWrite(led2,0)
button = 14 # This is the A0 pin.
buzzer = 8 # This is the D8 pin.
Netmaxiot.pinMode(button, "INPUT")
Netmaxiot.pinMode(buzzer, "OUTPUT")
print("Netmaxiot Basic Hardware Test.")
print(
"Setup: Connect the button sensor to port A0. Connect a simple Buzzer to port D8."
)
print(
"Press the button on Netmax iot Shield and the buzzer will buzz tadaaaaaa!"
)
time.sleep(4.0)
while True:
try:
butt_val = Netmaxiot.digitalRead(
button) # Each time we go through the loop, we read A0.
print(butt_val) # Print the value of A0 huhaaaaa hahaha :)
if butt_val == 1:
Netmaxiot.digitalWrite(buzzer, 1)
print('start')
time.sleep(1)
else:
Netmaxiot.digitalWrite(buzzer, 0)
time.sleep(.5)
except IOError:
print("Error")
