def __init__(self, localPathPlanner):
WalkingMode.__init__(self, localPathPlanner)
self.step_index_for_reset = 0
# Initialize atlas mode and atlas_sim_interface_command publishers
self.asi_command = rospy.Publisher(
'/atlas/atlas_sim_interface_command', AtlasSimInterfaceCommand,
None, False, True, None)
self._Odometer = Odometer()
# ##############################
# #self._StrategyForward = BDI_StrategyForward(self._Odometer)
# self._stepDataInit = BDI_Strategy(self._Odometer)
# self._StepQueue = StepQueue()
# self._SteppingStonesQueue = PathQueue()
# self._SteppingStonesPath = []
# self._setStep = True
# self._passedSteppingStones = False
# ##############################
self._BDI_StateMachine = BDI_StateMachine(self._Odometer)
#self._odom_position = Pose()
self._bDone = False
############################
#joint controller
self._cur_jnt = [0] * 28
robot_name = "atlas"
jnt_names = [
'back_lbz',
'back_mby',
'back_ubx',
'neck_ay', #3
'l_leg_uhz',
'l_leg_mhx',
'l_leg_lhy',
'l_leg_kny',
'l_leg_uay',
'l_leg_lax', #9
'r_leg_uhz',
'r_leg_mhx',
'r_leg_lhy',
'r_leg_kny',
'r_leg_uay',
'r_leg_lax', #15
'l_arm_usy',
'l_arm_shx',
'l_arm_ely',
'l_arm_elx',
'l_arm_uwy',
'l_arm_mwx', #21
'r_arm_usy',
'r_arm_shx',
'r_arm_ely',
'r_arm_elx',
'r_arm_uwy',
'r_arm_mwx'
] #27
self._JC = JointCommands_msg_handler(robot_name, jnt_names)
def __init__(self, iTf):
WalkingMode.__init__(self, DD_PathPlanner())
self._tf = iTf
# Initialize atlas atlas_sim_interface_command publisher
self.asi_command = rospy.Publisher(
'/atlas/atlas_sim_interface_command', AtlasSimInterfaceCommand,
None, False, True, None)
# for debug publish:
self._debug_pub_StepIndex = rospy.Publisher('debug_DD_StepIndex',
Int32)
self._Odometer = Odometer()
self._bDone = False
self._StepIndex = 1
self._command = 0
############################
#joint controller
self._cur_jnt = [0] * 28
robot_name = "atlas"
jnt_names = [
'back_lbz',
'back_mby',
'back_ubx',
'neck_ay', #3
'l_leg_uhz',
'l_leg_mhx',
'l_leg_lhy',
'l_leg_kny',
'l_leg_uay',
'l_leg_lax', #9
'r_leg_uhz',
'r_leg_mhx',
'r_leg_lhy',
'r_leg_kny',
'r_leg_uay',
'r_leg_lax', #15
'l_arm_usy',
'l_arm_shx',
'l_arm_ely',
'l_arm_elx',
'l_arm_uwy',
'l_arm_mwx', #21
'r_arm_usy',
'r_arm_shx',
'r_arm_ely',
'r_arm_elx',
'r_arm_uwy',
'r_arm_mwx'
] #27
self._JC = JointCommands_msg_handler(robot_name, jnt_names)
def __init__(self, pathPlanner):
#StateMachine
StateMachine.__init__(self, State('Idle'))
self._bIsDone = False
self._StepQueue = deque([])
self._actualRobot = CD_ActualRobot(pathPlanner, self._StepQueue)
self._phantomRobot = CD_PhantomRobot(CD_PathPlanner(), Odometer(),
self._StepQueue)
# Add states
StateMachine.AddState(self, State('WaitingForPhantom'))
StateMachine.AddState(self, State('BothWalking'))
StateMachine.AddState(self, State('WaitingForActual'))
StateMachine.AddState(self, State('WindDown'))
# Add transitions
StateMachine.AddTransition(self, 'Idle', 'Start', 'WaitingForPhantom')
StateMachine.AddTransition(self, 'WaitingForPhantom', 'Both',
'BothWalking')
StateMachine.AddTransition(self, 'BothWalking', 'Actual',
'WaitingForActual')
StateMachine.AddTransition(self, 'WaitingForActual', 'WindingDown',
'WindDown')
StateMachine.AddTransition(self, 'WaitingForActual', 'Both',
'BothWalking')
StateMachine.AddTransition(self, 'WindDown', 'Done', 'Idle')
class DD_WalkingMode(WalkingMode):
def __init__(self, iTf):
WalkingMode.__init__(self, DD_PathPlanner())
self._tf = iTf
# Initialize atlas atlas_sim_interface_command publisher
self.asi_command = rospy.Publisher(
'/atlas/atlas_sim_interface_command', AtlasSimInterfaceCommand,
None, False, True, None)
# for debug publish:
self._debug_pub_StepIndex = rospy.Publisher('debug_DD_StepIndex',
Int32)
self._Odometer = Odometer()
self._bDone = False
self._StepIndex = 1
self._command = 0
############################
#joint controller
self._cur_jnt = [0] * 28
robot_name = "atlas"
jnt_names = [
'back_lbz',
'back_mby',
'back_ubx',
'neck_ay', #3
'l_leg_uhz',
'l_leg_mhx',
'l_leg_lhy',
'l_leg_kny',
'l_leg_uay',
'l_leg_lax', #9
'r_leg_uhz',
'r_leg_mhx',
'r_leg_lhy',
'r_leg_kny',
'r_leg_uay',
'r_leg_lax', #15
'l_arm_usy',
'l_arm_shx',
'l_arm_ely',
'l_arm_elx',
'l_arm_uwy',
'l_arm_mwx', #21
'r_arm_usy',
'r_arm_shx',
'r_arm_ely',
'r_arm_elx',
'r_arm_uwy',
'r_arm_mwx'
] #27
self._JC = JointCommands_msg_handler(robot_name, jnt_names)
def Initialize(self, parameters):
WalkingMode.Initialize(self, parameters)
self._LPP.Initialize()
self._bRobotIsStatic = True
self._BDIswitch_client = rospy.ServiceProxy('C25/BDIswitch', C25BDI)
state = Int32()
state.data = 1
resp_switched_to_BDI_odom = self._BDIswitch_client(state)
print "Using BDI odom"
# rospy.wait_for_service('foot_placement_path') # used for clone
# self._foot_placement_client = rospy.ServiceProxy('foot_placement_path', FootPlacement_Service)
rospy.wait_for_service('foot_placement')
self._foot_placement_client = rospy.ServiceProxy(
'foot_placement', FootPlacement_Service)
# Subscribers:
self._Subscribers["Odometry"] = rospy.Subscriber(
'/C25/publish', C25C0_ROP, self._odom_cb)
self._Subscribers["ASI_State"] = rospy.Subscriber(
'/atlas/atlas_sim_interface_state', AtlasSimInterfaceState,
self.asi_state_cb)
self._Subscribers["IMU"] = rospy.Subscriber('/atlas/imu', Imu,
self._get_imu)
self._Subscribers["JointStates"] = rospy.Subscriber(
'/atlas/joint_states', JointState, self._get_joints)
rospy.sleep(0.3)
self._k_effort = [0] * 28
self._k_effort[3] = 255 # k_effort[0:4] = 4*[255]
# k_effort[16:28] = 12*[255]
self._JC.set_k_eff(self._k_effort)
self._JC.set_all_pos(self._cur_jnt)
self._JC.send_command()
self._RequestFootPlacements()
self._bDone = False
self._bIsSwaying = False
self._StepIndex = 1
self._command = 0
#self._bRobotIsStatic = False
self._GetOrientationDelta0Values(
) # Orientation difference between BDI odom and Global
# Put robot into stand position
stand = AtlasSimInterfaceCommand(None, AtlasSimInterfaceCommand.STAND,
None, None, None, None,
self._k_effort)
self.asi_command.publish(stand)
rospy.sleep(0.3)
def StartWalking(self):
self._bDone = False
def Walk(self):
WalkingMode.Walk(self)
command = self.GetCommand()
#print ("Walk ",command)
self.asi_command.publish(command)
#print(command)
self._WalkingModeStateMachine.PerformTransition("Go")
self._StepIndex = self._StepIndex + 1
def EmergencyStop(self):
WalkingMode.Stop(self)
def IsDone(self):
return self._bDone
def GetCommand(self):
command = AtlasSimInterfaceCommand()
command.behavior = AtlasSimInterfaceCommand.WALK
# command.k_effort = [0] * 28
# k_effort = [0] * 28
# k_effort[3] = 255 # k_effort[0:4] = 4*[255]
# # k_effort[16:28] = 12*[255]
step_queue = self._LPP.GetNextStep()
if (0 == step_queue):
command = 0
else:
for i in range(4):
command.walk_params.step_queue[i] = copy.deepcopy(
step_queue[i])
command.walk_params.step_queue[
i].step_index = self._StepIndex + i
command.walk_params.step_queue[i].duration = 0.63
#print("GetCommand",command.walk_params.step_queue)
command.walk_params.step_queue[
i] = self._TransforFromGlobalToBDI(
command.walk_params.step_queue[i], i)
return command
def HandleStateMsg(self, state):
command = 0
if ("Idle" == self._WalkingModeStateMachine.GetCurrentState().Name):
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
elif ("Wait" == self._WalkingModeStateMachine.GetCurrentState().Name):
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
print("Odometer Updated")
#print(2)
self._WalkingModeStateMachine.PerformTransition("Go")
elif ("Walking" == self._WalkingModeStateMachine.GetCurrentState().Name
):
#print(3)
if (DD_PathPlannerEnum.Active == self._LPP.State):
command = self.GetCommand()
elif (DD_PathPlannerEnum.Waiting == self._LPP.State):
self._RequestFootPlacements()
elif ("Done" == self._WalkingModeStateMachine.GetCurrentState().Name):
#print(4)
self._bDone = True
else:
raise Exception("QS_WalkingModeStateMachine::Bad State Name")
return command
def _RequestFootPlacements(self):
print("Request Foot Placements")
# Perform a service request from FP
try:
# Handle preemption?
# if received a "End of mission" sort of message from FP
start_pose, other_foot_pose = self._GetStartingFootPose()
resp = self._foot_placement_client(0, start_pose, other_foot_pose)
if [] == resp.foot_placement_path: # 1 == resp.done:
self._WalkingModeStateMachine.PerformTransition("Finished")
else:
listSteps = []
for desired in resp.foot_placement_path:
#print("Desired: ",desired)
command = AtlasSimInterfaceCommand()
step = command.step_params.desired_step
step.foot_index = desired.foot_index
step.swing_height = desired.clearance_height
step.pose.position.x = desired.pose.position.x
step.pose.position.y = desired.pose.position.y
step.pose.position.z = desired.pose.position.z
Q = quaternion_from_euler(desired.pose.ang_euler.x,
desired.pose.ang_euler.y,
desired.pose.ang_euler.z)
step.pose.orientation.x = Q[0]
step.pose.orientation.y = Q[1]
step.pose.orientation.z = Q[2]
step.pose.orientation.w = Q[3]
listSteps.append(step)
self._LPP.SetPath(listSteps)
#print("listSteps: ",listSteps)
except rospy.ServiceException, e:
print "Foot Placement Service call failed: %s" % e
class QS_WalkingMode(WalkingMode):
def __init__(self, iTf):
self._LPP = QS_PathPlanner()
WalkingMode.__init__(self, self._LPP)
self._tf = iTf
# Initialize atlas atlas_sim_interface_command publisher
self.asi_command = rospy.Publisher(
'/atlas/atlas_sim_interface_command', AtlasSimInterfaceCommand,
None, False, True, None)
self._Odometer = Odometer()
self._bDone = False
self._bIsSwaying = False
self._command = 0
############################
#joint controller
self._cur_jnt = [0] * 28
robot_name = "atlas"
jnt_names = [
'back_lbz',
'back_mby',
'back_ubx',
'neck_ay', #3
'l_leg_uhz',
'l_leg_mhx',
'l_leg_lhy',
'l_leg_kny',
'l_leg_uay',
'l_leg_lax', #9
'r_leg_uhz',
'r_leg_mhx',
'r_leg_lhy',
'r_leg_kny',
'r_leg_uay',
'r_leg_lax', #15
'l_arm_usy',
'l_arm_shx',
'l_arm_ely',
'l_arm_elx',
'l_arm_uwy',
'l_arm_mwx', #21
'r_arm_usy',
'r_arm_shx',
'r_arm_ely',
'r_arm_elx',
'r_arm_uwy',
'r_arm_mwx'
] #27
self._JC = JointCommands_msg_handler(robot_name, jnt_names)
def Initialize(self, parameters):
WalkingMode.Initialize(self, parameters)
self._command = 0
self._bRobotIsStatic = True
rospy.wait_for_service('foot_placement_path')
self._foot_placement_client = rospy.ServiceProxy(
'foot_placement_path', FootPlacement_Service)
# Subscribers:
self._Subscribers["Odometry"] = rospy.Subscriber(
'/C25/publish', C25C0_ROP, self._odom_cb)
self._Subscribers["ASI_State"] = rospy.Subscriber(
'/atlas/atlas_sim_interface_state', AtlasSimInterfaceState,
self.asi_state_cb)
self._Subscribers["IMU"] = rospy.Subscriber('/atlas/imu', Imu,
self._get_imu)
self._Subscribers["JointStates"] = rospy.Subscriber(
'/atlas/joint_states', JointState, self._get_joints)
rospy.sleep(0.3)
k_effort = [0] * 28
k_effort[0:4] = 4 * [255]
k_effort[16:28] = 12 * [255]
self._JC.set_k_eff(k_effort)
self._JC.set_all_pos(self._cur_jnt)
self._JC.send_command()
self._bDone = False
self._bIsSwaying = False
self._bRobotIsStatic = False
self._RequestFootPlacements()
self._GetOrientationDelta0Values(
) # Orientation difference between BDI odom and Global
# Put robot into stand position
stand = AtlasSimInterfaceCommand(None, AtlasSimInterfaceCommand.STAND,
None, None, None, None,
self._k_effort)
self.asi_command.publish(stand)
rospy.sleep(0.3)
def StartWalking(self):
self._bDone = False
def Walk(self):
WalkingMode.Walk(self)
self._command = self.GetCommand(self._BDI_state)
self.asi_command.publish(self._command)
#print(command)
self._WalkingModeStateMachine.PerformTransition("Go")
self._bIsSwaying = True
def EmergencyStop(self):
WalkingMode.Stop(self)
def Stop(self):
WalkingMode.Stop(self)
def IsDone(self):
return self._bDone
def GetCommand(self, state):
command = AtlasSimInterfaceCommand()
command.behavior = AtlasSimInterfaceCommand.STEP
#give user control over neck, back_z and arms
command.k_effort = [0] * 28
command.k_effort[2:4] = 2 * [255]
command.k_effort[16:28] = 12 * [255]
command.step_params.desired_step = self._LPP.GetNextStep()
if (0 != command.step_params.desired_step):
# Not sure why such a magic number
command.step_params.desired_step.duration = 0.63
# Apparently this next line is a must
command.step_params.desired_step.step_index = 1
command.step_params.desired_step = self._TransforFromGlobalToBDI(
command.step_params.desired_step, state)
else:
command = 0
return command
def HandleStateMsg(self, state):
command = 0
if ("Idle" == self._WalkingModeStateMachine.GetCurrentState().Name):
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
elif ("Wait" == self._WalkingModeStateMachine.GetCurrentState().Name):
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
print("Odometer Updated")
#print(2)
self._WalkingModeStateMachine.PerformTransition("Go")
elif ("Walking" == self._WalkingModeStateMachine.GetCurrentState().Name
):
#print(3)
if (QS_PathPlannerEnum.Active == self._LPP.State):
command = self.GetCommand(state)
elif (QS_PathPlannerEnum.Waiting == self._LPP.State):
self._RequestFootPlacements()
elif ("Done" == self._WalkingModeStateMachine.GetCurrentState().Name):
#print(4)
self._bDone = True
else:
raise Exception("QS_WalkingModeStateMachine::Bad State Name")
return command
def _RequestFootPlacements(self):
print("Request Foot Placements")
# Perform a service request from FP
try:
# Handle preemption?
# if received a "End of mission" sort of message from FP
start_pose, other_foot_pose = self._GetStartingFootPose()
resp = self._foot_placement_client(0, start_pose, other_foot_pose)
if [] == resp.foot_placement_path: # 1 == resp.done:
self._WalkingModeStateMachine.PerformTransition(
"Finished"
) # if array is empty need to finish with error (didn't reach goal)
else:
listSteps = []
for desired in resp.foot_placement_path:
command = AtlasSimInterfaceCommand()
step = command.step_params.desired_step
step.foot_index = desired.foot_index
step.swing_height = desired.clearance_height
step.pose.position.x = desired.pose.position.x
step.pose.position.y = desired.pose.position.y
step.pose.position.z = desired.pose.position.z
Q = quaternion_from_euler(desired.pose.ang_euler.x,
desired.pose.ang_euler.y,
desired.pose.ang_euler.z)
step.pose.orientation.x = Q[0]
step.pose.orientation.y = Q[1]
step.pose.orientation.z = Q[2]
step.pose.orientation.w = Q[3]
listSteps.append(step)
self._LPP.SetPath(listSteps)
#print(listSteps)
except rospy.ServiceException, e:
print "Foot Placement Service call failed: %s" % e
class AP_WalkingMode(WalkingMode):
def __init__(self, iTf):
self._LPP = AP_PathPlanner()
WalkingMode.__init__(self, self._LPP)
self._tf = iTf
self._StepIndex = 1
# Initialize atlas atlas_sim_interface_command publisher
self.asi_command = rospy.Publisher(
'/atlas/atlas_sim_interface_command', AtlasSimInterfaceCommand,
None, False, True, None)
self._Odometer = Odometer()
self._bDone = False
self._bIsSwaying = False
self._command = 0
############################
#joint controller
self._cur_jnt = [0] * 28
robot_name = "atlas"
jnt_names = [
'back_lbz',
'back_mby',
'back_ubx',
'neck_ay', #3
'l_leg_uhz',
'l_leg_mhx',
'l_leg_lhy',
'l_leg_kny',
'l_leg_uay',
'l_leg_lax', #9
'r_leg_uhz',
'r_leg_mhx',
'r_leg_lhy',
'r_leg_kny',
'r_leg_uay',
'r_leg_lax', #15
'l_arm_usy',
'l_arm_shx',
'l_arm_ely',
'l_arm_elx',
'l_arm_uwy',
'l_arm_mwx', #21
'r_arm_usy',
'r_arm_shx',
'r_arm_ely',
'r_arm_elx',
'r_arm_uwy',
'r_arm_mwx'
] #27
self._JC = JointCommands_msg_handler(robot_name, jnt_names)
def Initialize(self, parameters):
WalkingMode.Initialize(self, parameters)
self._LPP.Initialize()
self._command = 0
self._bRobotIsStatic = True
self._bGotStaticPose = False
self._BDI_Static_pose = Pose()
self._started_to_walk = False
self._target_pose = None
self._StepIndex = 1
self._isDynamic = False
self._stepWidth = 0.25 # Width of stride
self._theta_max = 0.30 # max turning angle per step
self._x_length_max = 0.25 # [meters] max step length (radius =~ 0.42 [m])
self._y_length_max = 0.15 # [meters]
# parameters to tune (see also 'Motion' task parameters):
self._err_rot = 0.018 #0.10 # [rad]
self._err_trans = 0.02 # 0.1 # [meters]
## USING task parameters:
if ((None != parameters) and ('Motion' in parameters)):
DesiredMotion = parameters['Motion']
if "Dynamic" == DesiredMotion: # Dynamic parameters
self._isDynamic = True
self._stepWidth = 0.2 #0.3 # Width of stride
self._theta_max = 0.15 #0.35 # max turning angle per step
self._x_length_max = 0.02 #0.25 # [meters] max step length (radius =~ 0.42 [m])
self._y_length_max = 0.15 #0.2 # [meters]
if "Dynamic10" == DesiredMotion: # Dynamic parameters
self._isDynamic = True
self._stepWidth = 0.2 #0.3 # Width of stride
self._theta_max = 0.15 #0.35 # max turning angle per step
self._x_length_max = 0.10 #0.25 # [meters] max step length (radius =~ 0.42 [m])
self._y_length_max = 0.10 #0.2 # [meters]
else: # Quasi-Static parameters (default)
self._isDynamic = False
self._stepWidth = 0.25 # Width of stride
self._theta_max = 0.30 # max turning angle per step
self._x_length_max = 0.25 # [meters] max step length (radius =~ 0.42 [m])
self._y_length_max = 0.15 # [meters]
self._R = self._stepWidth / 2 # Radius of turn, turn in place
# parameter 'Object' uses service to get delta alignment to target object
if ((None != parameters) and ('Object' in parameters)):
self._DesiredObject = parameters['Object']
else:
self._DesiredObject = "delta"
# parameter to turn in place and move (translate):
self._delta_yaw = 0.0
self._delta_trans = Point()
self._delta_trans.x = 0.0
self._delta_trans.y = 0.0
self._delta_trans.z = 0.0
# 'turn_in_place_Yaw' uses the parameter of the Yaw angle to turn in place
if ((None != parameters) and ('turn_in_place_Yaw' in parameters)):
self._target_pose = "Rotate_Translate_delta"
self._delta_yaw = float(parameters['turn_in_place_Yaw'])
# 'Xmovement' uses the parameter to translate x meters (+=fwd/-=bwd) from the starting place of the robot
if ((None != parameters) and ('Xmovement' in parameters)):
self._target_pose = "Rotate_Translate_delta"
self._delta_trans.x = float(parameters['Xmovement'])
# 'Ymovement' uses the parameter to translate y meters (+=left/-=right) from the starting place of the robot
if ((None != parameters) and ('Ymovement' in parameters)):
self._target_pose = "Rotate_Translate_delta"
self._delta_trans.y = float(parameters['Ymovement'])
if None == self._target_pose:
rospy.wait_for_service('C23/C66')
self._foot_placement_client = rospy.ServiceProxy(
'C23/C66', C23_orient) # object recognition service
# rospy.wait_for_service('foot_aline_pose')
# self._foot_placement_client = rospy.ServiceProxy('foot_aline_pose', C23_orient) # clone_service
self._BDIswitch_client = rospy.ServiceProxy('C25/BDIswitch', C25BDI)
state = Int32()
state.data = 1
resp_switched_to_BDI_odom = self._BDIswitch_client(state)
print "Using BDI odom"
# Subscribers:
#self._Subscribers["Odometry"] = rospy.Subscriber('/ground_truth_odom',Odometry,self._odom_cb)
self._Subscribers["ASI_State"] = rospy.Subscriber(
'/atlas/atlas_sim_interface_state', AtlasSimInterfaceState,
self.asi_state_cb)
self._Subscribers["IMU"] = rospy.Subscriber('/atlas/imu', Imu,
self._get_imu)
self._Subscribers["JointStates"] = rospy.Subscriber(
'/atlas/joint_states', JointState, self._get_joints)
rospy.sleep(0.3)
self._RequestTargetPose(self._DesiredObject)
self._k_effort = [0] * 28
self._k_effort[3] = 255
# self._k_effort[0:4] = 4*[255]
# self._k_effort[16:28] = 12*[255]
self._JC.set_k_eff(self._k_effort)
self._JC.set_all_pos(self._cur_jnt)
self._JC.send_command()
self._bDone = False
self._bIsSwaying = False
#self._bRobotIsStatic = False
#self._GetOrientationDelta0Values() # Orientation difference between BDI odom and Global
# Put robot into stand position
stand = AtlasSimInterfaceCommand(None, AtlasSimInterfaceCommand.STAND,
None, None, None, None,
self._k_effort)
self.asi_command.publish(stand)
rospy.sleep(0.3)
def StartWalking(self):
self._bDone = False
def Walk(self):
WalkingMode.Walk(self)
#self._command = self.GetCommand(self._BDI_state)
if self._isDynamic:
self._command = self.GetCommandDynamic()
self._StepIndex = self._StepIndex + 1
else:
self._command = self.GetCommandStatic(self._BDI_state)
if (0 != self._command):
self.asi_command.publish(self._command)
self._bIsSwaying = True
#print(command)
self._WalkingModeStateMachine.PerformTransition("Go")
def EmergencyStop(self):
WalkingMode.Stop(self)
def Stop(self):
WalkingMode.Stop(self)
def IsDone(self):
return self._bDone
def IsReady(self):
return True
def GetCommandStatic(self, state):
command = AtlasSimInterfaceCommand()
command.behavior = AtlasSimInterfaceCommand.STEP
#give user control over neck, back_z and arms
command.k_effort = self._k_effort
command.step_params.desired_step = self._LPP.GetNextStaticStep()
if (0 != command.step_params.desired_step):
# Not sure why such a magic number
command.step_params.desired_step.duration = 0.63
# Apparently this next line is a must
command.step_params.desired_step.step_index = 1
#command.step_params.desired_step = self._TransforFromGlobalToBDI(command.step_params.desired_step,state)
else:
command = 0
return command
def GetCommandDynamic(self):
command = AtlasSimInterfaceCommand()
command.behavior = AtlasSimInterfaceCommand.WALK
# command.k_effort = [0] * 28
# k_effort = [0] * 28
# k_effort[3] = 255 # k_effort[0:4] = 4*[255]
# # k_effort[16:28] = 12*[255]
command.k_effort = self._k_effort
step_queue = self._LPP.GetNextDynamicStep()
if (0 == step_queue):
command = 0
else:
for i in range(4):
command.walk_params.step_queue[i] = copy.deepcopy(
step_queue[i])
command.walk_params.step_queue[
i].step_index = self._StepIndex + i
command.walk_params.step_queue[i].duration = 0.63
#print("GetCommand",command.walk_params.step_queue)
#command.walk_params.step_queue[i] = self._TransforFromGlobalToBDI(command.walk_params.step_queue[i],i)
return command
def HandleStateMsg(self, state):
command = 0
if ("Idle" == self._WalkingModeStateMachine.GetCurrentState().Name):
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
elif ("Wait" == self._WalkingModeStateMachine.GetCurrentState().Name):
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
print("Odometer Updated")
#print(2)
self._WalkingModeStateMachine.PerformTransition("Go")
elif ("Walking" == self._WalkingModeStateMachine.GetCurrentState().Name
):
#print(3)
if (AP_PathPlannerEnum.Active == self._LPP.State):
if self._isDynamic:
command = self.GetCommandDynamic()
else:
command = self.GetCommandStatic(state)
elif (AP_PathPlannerEnum.Waiting == self._LPP.State
): # or (AP_PathPlannerEnum.Empty == self._LPP.State):
self._RequestTargetPose(self._DesiredObject)
elif ("Done" == self._WalkingModeStateMachine.GetCurrentState().Name):
#print(4)
self._bDone = True
else:
raise Exception("AL_WalkingModeStateMachine::Bad State Name")
return command
def _RequestTargetPose(self, desired_object):
# Perform a service request from FP
try:
# Handle preemption?
# if received a "End of mission" sort of message from FP
#start_pose,other_foot_pose = self._GetStartingFootPose()
if None == self._target_pose:
print("Request Target Pose to ", desired_object)
self._target_pose = self._foot_placement_client(
desired_object) # "target: 'Firehose'") #
print("Got from C23/C66 service the following Pose:",
self._target_pose)
delta_yaw, delta_trans = self._GetDeltaToObject(
desired_object, self._target_pose)
elif "Rotate_Translate_delta" == self._target_pose and not self._started_to_walk:
delta_yaw = self._delta_yaw
delta_trans = self._delta_trans
else:
delta_yaw = 0.0
delta_trans = Point()
delta_trans.x = 0.0
delta_trans.y = 0.0
delta_trans.z = 0.0
start_position = copy.copy(self._BDI_Static_pose.position)
start_orientation = euler_from_quaternion([
self._BDI_Static_pose.orientation.x,
self._BDI_Static_pose.orientation.y,
self._BDI_Static_pose.orientation.z,
self._BDI_Static_pose.orientation.w
])
self._foot_placement_path = []
if math.fabs(delta_yaw) > self._err_rot:
self._foot_placement_path = self._foot_placement_path + self._GetRotationDeltaFP_Path(
delta_yaw, start_position, start_orientation)
self._started_to_walk = True
if self._DistanceXY(delta_trans) > self._err_trans:
self._foot_placement_path = self._foot_placement_path + self._GetTranslationDeltaFP_Path(
delta_yaw, delta_trans, start_position, start_orientation)
self._started_to_walk = True
#listSteps = []
# if (math.fabs(delta_yaw) <= self._err_rot) and (self._DistanceXY(delta_trans) <= self._err_trans): # finished task
if [] == self._foot_placement_path and self._started_to_walk: # 1 == resp.done:
self._WalkingModeStateMachine.PerformTransition("Finished")
# if big error need to finish with error (didn't reach goal)
else:
if not self._started_to_walk:
self._started_to_walk = True
## Step in place: two first steps
self._foot_placement_path = self._GetTwoFirstStepFP_Path(
start_position, start_orientation, False)
listSteps = []
for desired in self._foot_placement_path:
command = AtlasSimInterfaceCommand()
step = command.step_params.desired_step
step.foot_index = desired.foot_index
step.swing_height = desired.clearance_height
step.pose.position.x = desired.pose.position.x
step.pose.position.y = desired.pose.position.y
step.pose.position.z = desired.pose.position.z
Q = quaternion_from_euler(desired.pose.ang_euler.x,
desired.pose.ang_euler.y,
desired.pose.ang_euler.z)
step.pose.orientation.x = Q[0]
step.pose.orientation.y = Q[1]
step.pose.orientation.z = Q[2]
step.pose.orientation.w = Q[3]
#print ("step command:",step)
listSteps.append(step)
self._LPP.SetPath(listSteps)
#print(listSteps)
except rospy.ServiceException, e:
print "Foot Placement Service call failed: %s" % e
class WalkingModeBDI(WalkingMode):
def __init__(self, localPathPlanner):
WalkingMode.__init__(self, localPathPlanner)
self.step_index_for_reset = 0
# Initialize atlas mode and atlas_sim_interface_command publishers
self.asi_command = rospy.Publisher(
'/atlas/atlas_sim_interface_command', AtlasSimInterfaceCommand,
None, False, True, None)
self._Odometer = Odometer()
# ##############################
# #self._StrategyForward = BDI_StrategyForward(self._Odometer)
# self._stepDataInit = BDI_Strategy(self._Odometer)
# self._StepQueue = StepQueue()
# self._SteppingStonesQueue = PathQueue()
# self._SteppingStonesPath = []
# self._setStep = True
# self._passedSteppingStones = False
# ##############################
self._BDI_StateMachine = BDI_StateMachine(self._Odometer)
#self._odom_position = Pose()
self._bDone = False
############################
#joint controller
self._cur_jnt = [0] * 28
robot_name = "atlas"
jnt_names = [
'back_lbz',
'back_mby',
'back_ubx',
'neck_ay', #3
'l_leg_uhz',
'l_leg_mhx',
'l_leg_lhy',
'l_leg_kny',
'l_leg_uay',
'l_leg_lax', #9
'r_leg_uhz',
'r_leg_mhx',
'r_leg_lhy',
'r_leg_kny',
'r_leg_uay',
'r_leg_lax', #15
'l_arm_usy',
'l_arm_shx',
'l_arm_ely',
'l_arm_elx',
'l_arm_uwy',
'l_arm_mwx', #21
'r_arm_usy',
'r_arm_shx',
'r_arm_ely',
'r_arm_elx',
'r_arm_uwy',
'r_arm_mwx'
] #27
self._JC = JointCommands_msg_handler(robot_name, jnt_names)
def Initialize(self, parameters):
WalkingMode.Initialize(self, parameters)
self._Preview_Distance = 0.0 # planned ahead distance in BDI command
# Subscriber
self._Subscribers["Path"] = rospy.Subscriber('/path', C31_Waypoints,
self._path_cb)
self._Subscribers["Odometry"] = rospy.Subscriber(
'/C25/publish', C25C0_ROP, self._odom_cb) #
# self._Subscribers["Odometry"] = rospy.Subscriber('/ground_truth_odom',Odometry,self._odom_cb)
self._Subscribers["ASI_State"] = rospy.Subscriber(
'/atlas/atlas_sim_interface_state', AtlasSimInterfaceState,
self.asi_state_cb)
self._Subscribers["IMU"] = rospy.Subscriber('/atlas/imu', Imu,
self._get_imu)
self._Subscribers["JointStates"] = rospy.Subscriber(
'/atlas/joint_states', JointState, self._get_joints)
rospy.sleep(0.3)
self._bDone = False
# # Puts robot into freeze behavior, all joints controlled
# # Put the robot into a known state
k_effort = [0] * 28
k_effort[0:4] = 4 * [255]
k_effort[16:28] = 12 * [255]
self._JC.set_k_eff(k_effort)
self._JC.set_all_pos(self._cur_jnt)
self._JC.send_command()
# freeze = AtlasSimInterfaceCommand(None,AtlasSimInterfaceCommand.FREEZE, None, None, None, None, k_effort )
# self.asi_command.publish(freeze)
# # Puts robot into stand_prep behavior, a joint configuration suitable
# # to go into stand mode
# stand_prep = AtlasSimInterfaceCommand(None,AtlasSimInterfaceCommand.STAND_PREP, None, None, None, None, k_effort)
# self.asi_command.publish(stand_prep)
# rospy.sleep(2.0)
# self.mode.publish("nominal")
# Put robot into stand position
stand = AtlasSimInterfaceCommand(None, AtlasSimInterfaceCommand.STAND,
None, None, None, None, k_effort)
rospy.sleep(0.3)
self.asi_command.publish(stand)
# Initialize some variables before starting.
self.is_swaying = False
self._BDI_StateMachine.Initialize(self.step_index_for_reset)
def StartWalking(self):
self._bDone = False
return 0.3
def Walk(self):
WalkingMode.Walk(self)
self._yaw = 0
self._Odometer.SetYaw(self._yaw)
def Stop(self):
if (WalkingMode.Stop(self)):
self._BDI_StateMachine.Stop()
def EmergencyStop(self):
# Puts robot into freeze behavior, all joints controlled
# Put the robot into a known state
k_effort = [0] * 28
k_effort[3] = 255
# freeze = AtlasSimInterfaceCommand(None,AtlasSimInterfaceCommand.FREEZE, None, None, None, None, k_effort )
# self.asi_command.publish(freeze)
# rospy.sleep(0.3)
# Put robot into stand position
stand = AtlasSimInterfaceCommand(None, AtlasSimInterfaceCommand.STAND,
None, None, None, None, k_effort)
def IsDone(self):
return self._bDone
###################################################################################
#--------------------------- CallBacks --------------------------------------------
###################################################################################
def _path_cb(self, path):
rospy.loginfo('got path %s', path)
p = []
for wp in path.points:
p.append(Waypoint(wp.x, wp.y))
self.SetPath(p)
def _get_joints(self, msg):
self._cur_jnt = msg.position
# /atlas/atlas_sim_interface_state callback. Before publishing a walk command, we need
# the current robot position
def asi_state_cb(self, state):
# if self._LPP.GetDoingQual() and (16.2 < self._LPP.GetPos().GetX()) and (self._LPP.GetPos().GetX() < 19.7) and not self._passedSteppingStones:
# if (True == self._setStep): # Initialize before stepping stones
# self.step_index = state.walk_feedback.next_step_index_needed -1
# step1,step2,step3,step4 = self.initSteppingStoneStepData(self.step_index, state)
# self._StepQueue.Initialize(step1,step2,step3,step4)
# self.GetSteppingStoneStepPlan(state)
# print("asi_state_cb:: SteppingStonesQueue length: ",self._SteppingStonesQueue.Length() )
# self._setStep = False
# command = self.SteppingStoneCommand(state);
# #print(command)
# else:
# if self._LPP.GetDoingQual() and (False == self._setStep): # Initialize after stepping stones
# self._passedSteppingStones = True
# self._Odometer.SetPosition(state.pos_est.position.x,state.pos_est.position.y)
# print("asi_state_cb:: Initialize after stepping stones. Odometer X,Y: ",self._Odometer.GetGlobalPosition() )
# #self.Initialize()
# print("asi_state_cb:: Initialize after stepping stones. step index: ",self.step_index )
# WalkingMode.Initialize(self)
# self._BDI_StateMachine.Initialize(self.step_index)
# # self.step_index = state.behavior_feedback.walk_feedback.next_step_index_needed -1
# # step1,step2,step3,step4 = self.initSteppingStoneStepData(self.step_index, state)
# command = self.HandleStateMsg(state)
# self._bDone = self._WalkingModeStateMachine.IsDone()
# ######################
# self._setStep = True
command = self._StateMachine.HandleStateMsg(state)
self._bDone = self._StateMachine.IsDone()
if (0 != command):
self.asi_command.publish(command)
def _odom_cb(self, odom):
# SHOULD USE:
self._LPP.UpdatePosition(
odom.pose.pose.pose.position.x, odom.pose.pose.pose.position.y,
self._Preview_Distance) # from C25_GlobalPosition
#self._LPP.UpdatePosition(odom.pose.pose.position.x,odom.pose.pose.position.y) # from /ground_truth_odom
#self._odom_position = odom.pose.pose
def _get_imu(self, msg): #listen to /atlas/imu/pose/pose/orientation
roll, pitch, self._yaw = euler_from_quaternion([
msg.orientation.x, msg.orientation.y, msg.orientation.z,
msg.orientation.w
])
###############################################################################################
def SteppingStoneCommand(self, state):
command = 0
nextindex = state.walk_feedback.next_step_index_needed
if (nextindex > self.step_index):
self.step_index += 1
command = self.GetCommand()
# Instead of generating new steps, just pop a predefined queue
stepData = self._StepQueue.Push(self._SteppingStonesQueue.Pop())
#print("SteppingStoneCommand:: SteppingStonesQueue length: ",self._SteppingStonesQueue.Length() )
#print("SteppingStoneCommand:: index: ",self.step_index)
return command
# def SteppingStoneCommandStatic(self, state):
# # When the robot status_flags are 1 (SWAYING), you can publish the next step command.
# if (state.behavior_feedback.step_feedback.status_flags == 1 and self._setStep):
# self.step_index += 1
# self._setStep = False
# print("Step " + str(self.step_index))
# elif (state.behavior_feedback.step_feedback.status_flags == 2):
# self._setStep = True
# print("No Step")
# is_right_foot = self.step_index % 2
# command = AtlasSimInterfaceCommand()
# command.behavior = AtlasSimInterfaceCommand.STEP
# # k_effort is all 0s for full bdi control of all joints
# command.k_effort = [0] * 28
# # step_index should always be one for a step command
# command.step_params.desired_step.step_index = 1
# command.step_params.desired_step.foot_index = is_right_foot
# # duration has far as I can tell is not observed
# command.step_params.desired_step.duration = 0.63
# # swing_height is not observed
# command.step_params.desired_step.swing_height = 0.1
# #if self.step_index > 30:
# #print(str(self.calculate_pose(self.step_index)))
# # Determine pose of the next step based on the number of steps we have taken
# command.step_params.desired_step.pose = self.calculate_pose(self.step_index,state)
# return command
# # This method is used to calculate a pose of step based on the step_index
# # The step poses just cause the robot to walk in a circle
# def calculate_pose(self, step_index,state):
# # Right foot occurs on even steps, left on odd
# is_right_foot = step_index % 2
# is_left_foot = 1 - is_right_foot
# # Calculate orientation quaternion
# Q = quaternion_from_euler(0, 0, 0)
# pose = Pose()
# pose.position.x = state.pos_est.position.x - 3
# pose.position.y = state.pos_est.position.y + 0.15*is_left_foot
# # The z position is observed for static walking, but the foot
# # will be placed onto the ground if the ground is lower than z
# pose.position.z = 0
# pose.orientation.x = Q[0]
# pose.orientation.y = Q[1]
# pose.orientation.z = Q[2]
# pose.orientation.w = Q[3]
# return pose
def GetCommand(self):
command = AtlasSimInterfaceCommand()
command.behavior = AtlasSimInterfaceCommand.WALK
for i in range(4):
command.walk_params.step_queue[i] = self._StepQueue.Peek(i)
return command
def initSteppingStoneStepData(self, step_index, state):
print("initSteppingStoneStepData - index need to match:: cmd index = ",
step_index, "state first index = ",
state.walk_feedback.step_queue_saturated[0].step_index)
stepData1 = copy.deepcopy(state.walk_feedback.step_queue_saturated[0])
stepData2 = copy.deepcopy(state.walk_feedback.step_queue_saturated[1])
stepData3 = copy.deepcopy(stepData2)
stepData4 = copy.deepcopy(stepData2)
# corrections to step 3 and 4: y position foot width corection + ?alinement with stones?
step_width = 0.25 # [meters]
stepData3.step_index = step_index + 2
stepData3.foot_index = stepData3.step_index % 2
stepData4.step_index = step_index + 3
if 0 == stepData3.foot_index: # Left foot
stepData3.pose.position.y = stepData2.pose.position.y + step_width
else: # Right foot
stepData3.pose.position.y = stepData2.pose.position.y - step_width
# stepData3.pose.orientation.x = 0.0
# stepData3.pose.orientation.y = 0.0
# stepData3.pose.orientation.z = 0.0
# stepData3.pose.orientation.w = 1.0
return stepData1, stepData2, stepData3, stepData4
def GetSteppingStoneStepPlan(self, state):
# foot placement path:
path_start_foot_index = 1 # start stepping of SteppingStonesPath with Right foot
#Stepping stones centers in world cord. [FootPlacement(16.7,8.0,0.0),FootPlacement(17.4,8.0,0.0),FootPlacement(17.9,8.5,0.0),FootPlacement(18.6,8.5,0.0),FootPlacement(19.1,8.0,0.0),FootPlacement(20.0,8.0,0.0)]
self._SteppingStonesPath = [FootPlacement(16.9,7.87,0.0),FootPlacement(16.9,8.13,0.0),FootPlacement(17.3,7.87,0.0),FootPlacement(17.3,8.13,0.0),\
FootPlacement(17.5,7.87,deg2r(30.0)),FootPlacement(17.5,8.2,deg2r(45.0)),FootPlacement(17.6,8.05,deg2r(45.0)),\
FootPlacement(17.8,8.55,0.0),FootPlacement(17.8,8.35,0.0),FootPlacement(17.85,8.65,0.0),FootPlacement(18.0,8.35,0.0),FootPlacement(18.1,8.6,0.0),\
FootPlacement(18.5,8.35,0.0),FootPlacement(18.5,8.6,0.0),FootPlacement(18.7,8.35,deg2r(-30.0)),FootPlacement(18.7,8.5,deg2r(-30.0)),\
FootPlacement(19.0,8.0,deg2r(-30.0)),FootPlacement(19.0,8.17,0.0),FootPlacement(19.25,7.87,0.0),FootPlacement(19.25,8.13,0.0),\
FootPlacement(19.65,7.87,0.0),FootPlacement(19.65,8.13,0.0),FootPlacement(19.9,7.87,0.0),FootPlacement(19.9,8.13,0.0),FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0),\
FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0),FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0),FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0),\
FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0),FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0),FootPlacement(20.0,7.87,0.0),FootPlacement(20.0,8.13,0.0)]
## building SteppingStonesQueue:
# difference between BDI est position and LPP position (world cord.)
deltaX = state.pos_est.position.x - self._LPP.GetPos().GetX()
deltaY = state.pos_est.position.y - self._LPP.GetPos().GetY()
deltaYaw = 0.0
deltaFootPlacement = FootPlacement(deltaX, deltaY, deltaYaw)
# feet positions for step data = self._SteppingStonesPath + deltaFootPlacement
index = self._StepQueue.Peek(3).step_index # + 1
# step in place:
# stepData1 = copy.deepcopy(self._StepQueue.Peek(2)) # using stepData3 to have the correct foot y position
# stepData1.step_index = index
# stepData1.foot_index = stepData1.step_index%2
# index += 1
# stepData2 = copy.deepcopy(self._StepQueue.Peek(3)) # using stepData3 to have the correct foot y position
# stepData2.step_index = index
# stepData2.foot_index = stepData2.step_index%2
# self._SteppingStonesQueue.Append([stepData1, stepData2])
if index % 2 == path_start_foot_index:
index += 1
stepData3 = copy.deepcopy(self._StepQueue.Peek(
2)) # using stepData3 to have the correct foot y position
stepData3.step_index = index
stepData3.foot_index = stepData3.step_index % 2
self._SteppingStonesQueue.Append([stepData3])
index += 1
for i in range(len(self._SteppingStonesPath)):
# need to calc. step_index and foot_index for step data
stepData = self._stepDataInit.GetStepData(
index + i) #self._StrategyForward
stepData.pose.position.x = self._SteppingStonesPath[i].GetX(
) + deltaX
stepData.pose.position.y = self._SteppingStonesPath[i].GetY(
) + deltaY
step_yaw = self._SteppingStonesPath[i].GetYaw() + deltaYaw
# Calculate orientation quaternion
Q = quaternion_from_euler(0, 0, step_yaw)
stepData.pose.orientation.x = Q[0]
stepData.pose.orientation.y = Q[1]
stepData.pose.orientation.z = Q[2]
stepData.pose.orientation.w = Q[3]
#print("GetSteppingStoneStepPlan:: step Data: ",stepData)
self._SteppingStonesQueue.Append([stepData])
def HandleStateMsg(self, state):
step_queue_i = 3 # 0-3
self._Preview_Distance = 0.3 + ( (state.pos_est.position.x-state.walk_feedback.step_queue_saturated[step_queue_i].pose.position.x)**2 + \
(state.pos_est.position.y-state.walk_feedback.step_queue_saturated[step_queue_i].pose.position.y)**2 )**0.5
if 2.0 <= self._Preview_Distance:
self._Preview_Distance = 2.0
command = 0
if ("Idle" == self._WalkingModeStateMachine.GetCurrentState().Name):
pass
elif ("Wait" == self._WalkingModeStateMachine.GetCurrentState().Name):
self.step_index_for_reset = state.walk_feedback.next_step_index_needed - 1
self._Odometer.SetPosition(state.pos_est.position.x,
state.pos_est.position.y)
BDI_Static_orientation_q = state.foot_pos_est[0].orientation
BDI_euler = euler_from_quaternion([
BDI_Static_orientation_q.x, BDI_Static_orientation_q.y,
BDI_Static_orientation_q.z, BDI_Static_orientation_q.w
])
self._Odometer.SetYaw(BDI_euler[2])
self._BDI_StateMachine.Initialize(self.step_index_for_reset)
self._BDI_StateMachine.GoForward()
self._WalkingModeStateMachine.PerformTransition("Go")
#yaw?
elif ("Walking" == self._WalkingModeStateMachine.GetCurrentState().Name
):
if (self._LPP.IsActive()):
# x,y = self._Odometer.GetGlobalPosition()
# self._LPP.UpdatePosition(x,y)
self._BDI_StateMachine.SetPathError(self._LPP.GetPathError())
targetYaw = self._LPP.GetTargetYaw()
delatYaw = targetYaw - self._Odometer.GetYaw()
debug_transition_cmd = "NoCommand"
if (math.sin(delatYaw) > 0.15):
#print("Sin(Delta)",math.sin(delatYaw), "Left")
debug_transition_cmd = "TurnLeft"
self._BDI_StateMachine.TurnLeft(targetYaw)
elif (math.sin(delatYaw) < -0.15):
#print("Sin(Delta)",math.sin(delatYaw), "Right")
debug_transition_cmd = "TurnRight"
self._BDI_StateMachine.TurnRight(targetYaw)
else:
debug_transition_cmd = "Stop"
self._BDI_StateMachine.Stop()
if (self._BDI_StateMachine.IsDone()):
self._WalkingModeStateMachine.PerformTransition("Finished")
command = self._BDI_StateMachine.Step(
state.walk_feedback.next_step_index_needed)
if (0 != command):
rospy.loginfo(
"WalkingModeBDI, asi_state_cb: State Machine Transition Cmd = %s, Preview Distance=%f"
% (debug_transition_cmd, self._Preview_Distance))
elif ("Done" == self._WalkingModeStateMachine.GetCurrentState().Name):
pass
else:
raise Exception("BDI_WalkingModeStateMachine::Bad State Name")
return command