#! /usr/bin/python
#Written By Tom Paulus, @tompaulus, www.tompaulus.com
#For DCC 2013.1
import time
import spidev
import RPi.GPIO as GPIO
from Adafruit_LEDBackpack.Adafruit_7Segment import SevenSegment
import smbus
GPIO.setmode(GPIO.BCM)
segment = SevenSegment(address=0x70) # which port the display is
spi = spidev.SpiDev()
light_adc = 7
l = list()
statusLED = 25
print "Press CTRL+Z to exit"
GPIO.setup(statusLED, GPIO.OUT)
def analogRead(port):
"""Read the given ADC port and preform the necessary shifting of bits"""
spi.open(0, 0)
if (port > 7) or (port < 0):
print 'analogRead -- Port Error, Must use a port between 0 and 7'
return -1
r = spi.xfer2([1, (8 + port) << 4, 0])
value = ((r[1] & 3) << 8) + r[2]
spi.close()
return value
from Adafruit_LEDBackpack.Adafruit_7Segment import SevenSegment
from Ard import *
green = 25
yellow = 24
red = 23
mosfet = 18
led1 = 4
led2 = 22
led3 = 21
pot_adc = 7
light_adc = 6
mode = 0
l = list()
segment = SevenSegment(address=0x70) #which port the display is
A = Arduino("BCM") #define the port name style
print "Press CTRL+Z to exit"
#Set the port types
A.pinMode(green,'IN')
A.pinMode(yellow,'IN')
A.pinMode(red,'IN')
A.pinMode(led1,'OUT')
A.pinMode(led2,'OUT')
A.pinMode(led3,'OUT')
#Turn off all LEDs
A.digitalWrite(led1,"LOW")
A.digitalWrite(led2,"LOW")
A.digitalWrite(led3,"LOW")
#!/usr/bin/python import time import datetime from Adafruit_LEDBackpack.Adafruit_7Segment import SevenSegment # =========================================================================== # Clock Example # =========================================================================== segment = SevenSegment(address=0x74) print "Press CTRL+Z to exit" c = 0 # Continually update the time on a 4 char, 7-segment display # Continually update the 8x8 display one pixel at a time # Set hours segment.writeDigitRaw(0, 0x00) segment.writeDigitRaw(1, 0x01) # Ones # Set minutes segment.writeDigitRaw(3, 0x02) # Tens segment.writeDigitRaw(4, 0x03) # Ones # Toggle color segment.setColon(1) # Toggle colon at 1Hz
#!/usr/bin/python import time import datetime from Adafruit_LEDBackpack.Adafruit_7Segment import SevenSegment from Adafruit_LEDBackpack.Adafruit_8x8 import EightByEight # =========================================================================== # 8x8 Pixel Example # =========================================================================== grid = EightByEight(address=0x70) # =========================================================================== # Clock Example # =========================================================================== segment = SevenSegment(address=0x74) print "Press CTRL+Z to exit" c = 0 # Continually update the time on a 4 char, 7-segment display # Continually update the 8x8 display one pixel at a time while(True): now = datetime.datetime.now() hour = now.hour minute = now.minute second = now.second # Set hours segment.writeDigit(0, int(hour / 10)) # Tens segment.writeDigit(1, hour % 10) # Ones
