def CreateRoundStrutwithCone(name, diameter, start, height, coneHeight, topDiameter, frameHeight):
#print(name)
vector = XYZ(0, 0, height*-1)
coneVector = XYZ(0, 0, (coneHeight-frameHeight)*-1)
frameVector = XYZ(0, 0, frameHeight * -1)
pp = Plane.CreateByNormalAndOrigin(vector, start + coneVector + frameVector*2)
ppCone = Plane.CreateByNormalAndOrigin(vector, start + frameVector)
ppFrame = Plane.CreateByNormalAndOrigin(vector, start)
frameProfile = CurveLoop().Create([Arc.Create(ppFrame, topDiameter/2, 0, math.pi), Arc.Create(ppFrame, topDiameter/2, math.pi, math.pi*2)])
coneProfile = CurveLoop().Create([Arc.Create(ppCone, topDiameter/2 + frameHeight + 1/12, 0, math.pi), Arc.Create(ppCone, topDiameter/2 + frameHeight + 1/12, math.pi, math.pi*2)])
profile = CurveLoop().Create([Arc.Create(pp, diameter/2, 0, math.pi), Arc.Create(pp, diameter/2, math.pi, math.pi*2)])
frame = GeometryCreationUtilities.CreateExtrusionGeometry([frameProfile], frameVector, frameHeight)
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile], vector, height - coneHeight-frameHeight)
try:
cone = GeometryCreationUtilities.CreateLoftGeometry([coneProfile, profile], SolidOptions(ElementId.InvalidElementId, ElementId.InvalidElementId))
# Create Element
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo, cone, frame])
ele.SetName(name)
return ele.Id
except:
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo, frame])
ele.SetName(name)
return ele.Id
def find_outer_contur_in_cls(cls, curve_loops):
"""Ищет внешний контур."""
all_cl_with_extrussion = []
inner_cls = []
outer_cls = []
i_x = 0
for cl in curve_loops:
plane_normal = cl.GetPlane().Normal
solid_elem = GeometryCreationUtilities.CreateExtrusionGeometry(
[cl], plane_normal, 1)
i_x = i_x + 1
for face in solid_elem.Faces:
if face.FaceNormal.IsAlmostEqualTo(plane_normal):
all_cl_with_extrussion.append((
face,
cl,
i_x))
for elem in all_cl_with_extrussion:
outside = True
for elem_2 in all_cl_with_extrussion:
if not elem[2] == elem_2[2]:
if cls.first_point_is_inside_face(elem, elem_2):
outside = False
break
if outside:
outer_cls.append(elem[1])
else:
inner_cls.append(elem[1])
return (outer_cls, inner_cls)
def CreateStraightPipe(name, diameter, thickness, startO, endO, length):
#correction = XYZ(0, 0, diameter/2)
#print("Diameter" + str(diameter))
#print(name)
correction = XYZ(0, 0, 0)
start = startO + correction
end = endO + correction
#print(name)
#print(length)
if (end - start).GetLength() > 0.1:
pp = Plane.CreateByNormalAndOrigin(end - start, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2 + thickness, 0, math.pi),
Arc.Create(pp, diameter / 2 + thickness, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile],
end - start,
length)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
else:
print("Duct too small")
return None
def CreateCubeStrut(csdname, csdwidth, csdlength, csdheight, csdstart,
csdrotation, scdthickness):
#print(csdname)
vector = XYZ(0, 0, csdheight * -1)
pp = Plane.CreateByNormalAndOrigin(vector, csdstart)
trans = Transform.CreateRotationAtPoint(vector, csdrotation, csdstart)
point1 = csdstart + XYZ(csdwidth / 2, csdlength / 2, 0)
point2 = csdstart + XYZ(csdwidth / 2 * -1, csdlength / 2, 0)
point3 = csdstart + XYZ(csdwidth / 2 * -1, csdlength / 2 * -1, 0)
point4 = csdstart + XYZ(csdwidth / 2, csdlength / 2 * -1, 0)
profileorigion = CurveLoop().Create([
Line.CreateBound(point1, point2),
Line.CreateBound(point2, point3),
Line.CreateBound(point3, point4),
Line.CreateBound(point4, point1)
])
finalProfile = CurveLoop.CreateViaTransform(profileorigion, trans)
geo = GeometryCreationUtilities.CreateExtrusionGeometry([finalProfile],
vector, csdheight)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(csdname)
return ele.Id
def CreateRoundStrut(name, diameter, start, height):
vector = XYZ(0, 0, height * -1)
print(name)
print(height)
pp = Plane.CreateByNormalAndOrigin(vector, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2, 0, math.pi),
Arc.Create(pp, diameter / 2, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile], vector,
height)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
def CreateStraightPipe(name, diameter, thickness, startO, endO, length):
correction = XYZ(0, 0, diameter / 2)
start = startO + correction
end = endO + correction
print(name)
print(length)
pp = Plane.CreateByNormalAndOrigin(end - start, start)
profile = CurveLoop().Create([
Arc.Create(pp, diameter / 2 + thickness, 0, math.pi),
Arc.Create(pp, diameter / 2 + thickness, math.pi, math.pi * 2)
])
geo = GeometryCreationUtilities.CreateExtrusionGeometry([profile],
end - start,
length)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(name)
return ele.Id
def get_solid_extrusion_from_bbox(bbox):
solid_opt = SolidOptions(ElementId.InvalidElementId,
ElementId.InvalidElementId)
b1 = XYZ(bbox.Min.X, bbox.Min.Y, bbox.Min.Z)
b2 = XYZ(bbox.Max.X, bbox.Min.Y, bbox.Min.Z)
b3 = XYZ(bbox.Max.X, bbox.Max.Y, bbox.Min.Z)
b4 = XYZ(bbox.Min.X, bbox.Max.Y, bbox.Min.Z)
bbox_height = bbox.Max.Z - bbox.Min.Z
lines = List[Curve]()
lines.Add(Line.CreateBound(b1, b2))
lines.Add(Line.CreateBound(b2, b3))
lines.Add(Line.CreateBound(b3, b4))
lines.Add(Line.CreateBound(b4, b1))
rectangle = [CurveLoop.Create(lines)]
extrusion = GeometryCreationUtilities.CreateExtrusionGeometry(
List[CurveLoop](rectangle),
XYZ.BasisZ,
bbox_height,
solid_opt,
)
return extrusion
def CreateStraightDuct(csdname, csdwidth, csdheight, thickness, csdstartO,
csdendO, csdlength):
#print(csdname)
#correction = XYZ(0, 0, csdheight / 2)
correction = XYZ(0, 0, 0)
csdstart = csdstartO + correction
csdend = csdendO + correction
if (csdend - csdstart).GetLength() > 0.1:
pp = Plane.CreateByNormalAndOrigin(csdend - csdstart, csdstart)
profile1 = Arc.Create(pp, csdwidth / 2 + thickness, 0, math.pi)
interVector = XYZ((csdend - csdstart).Y * -1, (csdend - csdstart).X, 0)
a = profile1.GetEndPoint(0)
b = profile1.GetEndPoint(1)
profile2 = Arc.Create(pp, csdheight / 2 + thickness, math.pi / 2,
math.pi * 3 / 2)
c = profile2.GetEndPoint(0)
d = profile2.GetEndPoint(1)
point1 = a + c - csdstart
point2 = b + c - csdstart
point3 = b + d - csdstart
point4 = a + d - csdstart
l1 = Line.CreateBound(point1, point2)
vector1 = point1 - point2
vector2 = XYZ((point1 - point2).X, (point1 - point2).Y, 0)
#print(vector1)
#print(vector2)
angle = vector1.AngleOnPlaneTo(interVector,
(csdend - csdstart).Normalize())
#angle = vector2.AngleTo(vector1)
#print(angle)
#print(point1)
#print(point2)
trans1 = Transform.CreateRotationAtPoint(csdend - csdstart, angle,
csdstart)
trans2 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle * (-1), csdstart)
trans3 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle * (-1) + math.pi / 2,
csdstart)
trans4 = Transform.CreateRotationAtPoint(csdend - csdstart,
angle + math.pi / 2, csdstart)
#print(angle)
#print(angle*(-1))
#print(angle * (-1) + math.pi/2)
#print(angle + math.pi / 2)
#print(point4)
profileorigion = CurveLoop().Create([
Line.CreateBound(point1, point2),
Line.CreateBound(point2, point3),
Line.CreateBound(point3, point4),
Line.CreateBound(point4, point1)
])
#print(l1.GetEndPoint(0))
#print(l1.GetEndPoint(1))
numbers = {}
list = []
l1Test1 = l1.CreateTransformed(trans1)
l1Test2 = l1.CreateTransformed(trans2)
l1Test3 = l1.CreateTransformed(trans3)
l1Test4 = l1.CreateTransformed(trans4)
numbers[abs(l1Test1.GetEndPoint(0).Z -
l1Test1.GetEndPoint(1).Z)] = trans1
numbers[abs(l1Test2.GetEndPoint(0).Z -
l1Test2.GetEndPoint(1).Z)] = trans2
numbers[abs(l1Test3.GetEndPoint(0).Z -
l1Test3.GetEndPoint(1).Z)] = trans3
numbers[abs(l1Test4.GetEndPoint(0).Z -
l1Test4.GetEndPoint(1).Z)] = trans4
list.append(abs(l1Test1.GetEndPoint(0).Z - l1Test1.GetEndPoint(1).Z))
list.append(abs(l1Test2.GetEndPoint(0).Z - l1Test2.GetEndPoint(1).Z))
list.append(abs(l1Test3.GetEndPoint(0).Z - l1Test3.GetEndPoint(1).Z))
list.append(abs(l1Test4.GetEndPoint(0).Z - l1Test4.GetEndPoint(1).Z))
list.sort()
finalProfile = CurveLoop.CreateViaTransform(profileorigion,
numbers[list[0]])
geo = GeometryCreationUtilities.CreateExtrusionGeometry(
[finalProfile], csdend - csdstart, csdlength)
ele = DirectShape.CreateElement(doc, ElementId(-2000151))
ele.SetShape([geo])
ele.SetName(csdname)
return ele.Id
else:
print("Duct too small")
return None
doc.GetElement(elem_id) for elem_id in uidoc.Selection.GetElementIds()
]
first_selected = selection[0]
solid_opt = SolidOptions(ElementId.InvalidElementId,
ElementId.InvalidElementId)
bbox = first_selected.get_BoundingBox(None)
bottom_z_offset = 0.1
bbox.Min = XYZ(bbox.Min.X, bbox.Min.Y, bbox.Min.Z - bottom_z_offset)
b1 = XYZ(bbox.Min.X, bbox.Min.Y, bbox.Min.Z)
b2 = XYZ(bbox.Max.X, bbox.Min.Y, bbox.Min.Z)
b3 = XYZ(bbox.Max.X, bbox.Max.Y, bbox.Min.Z)
b4 = XYZ(bbox.Min.X, bbox.Max.Y, bbox.Min.Z)
bbox_height = bbox.Max.Z - bbox.Min.Z
lines = List[Curve]()
lines.Add(Line.CreateBound(b1, b2))
lines.Add(Line.CreateBound(b2, b3))
lines.Add(Line.CreateBound(b3, b4))
lines.Add(Line.CreateBound(b4, b1))
rectangle = [CurveLoop.Create(lines)]
extrusion = GeometryCreationUtilities.CreateExtrusionGeometry(
List[CurveLoop](rectangle), XYZ.BasisZ, bbox_height, solid_opt)
category_id = ElementId(Bic.OST_GenericModel)
with db.Transaction("solid_bbox_direct_shape") as tx:
direct_shape = DirectShape.CreateElement(doc, category_id, "A", "B")
direct_shape.SetShape([extrusion])