def _configureInput(self):
"""
Tune initialisation
"""
# Input data type
inputType = self.getProp("InputType").upper()
# Get the event time (for CondDb) from ODIN
from Configurables import EventClockSvc
EventClockSvc().EventTimeDecoder = "OdinTimeDecoder"
# if property set explcicitly - use it!
if self.isPropertySet('EnableUnpack'):
unPack = self.getProp('EnableUnpack')
DstConf(EnableUnpack=unPack)
PhysConf(EnableUnpack=unPack)
elif inputType != "MDF":
defaultUnpacking = ["Reconstruction", "Stripping"]
DstConf(EnableUnpack=defaultUnpacking)
PhysConf(EnableUnpack=defaultUnpacking)
if inputType != "MDST":
if self.getProp("Simulation"):
DstConf().setProp("SimType", "Full")
return inputType
def defineGeometry(self):
# DIGI is always simulation, as is usage of MC truth!
if self.getProp( "WithMC" ) or self.getProp( "InputType" ).upper() == 'DIGI':
self.setProp( "Simulation", True )
# Check that detector list does not contain non-upgrade detectors if in upgrade mode (can crash later)
if( self.getProp("DataType") is "Upgrade"):
for det in self.getProp("Detectors"):
if det in ['Velo', 'TT', 'OT', 'IT']:
log.warning("You are running with non-upgrade detector %s in upgrade mode."%det)
# Delegate handling to LHCbApp configurable
self.setOtherProps(LHCbApp(),["DataType","CondDBtag","DDDBtag","Simulation","Detectors"])
# Set list of detectors in DstConf
dstConfDetList = []
simConfDetList = []
for det in self.getProp("Detectors"):
if det in ['Rich1', 'Rich2', 'Rich1Pmt', 'Rich2Pmt']:
if "Rich" not in dstConfDetList:
dstConfDetList.append("Rich")
if "Rich" not in simConfDetList:
simConfDetList.append("Rich")
elif det in ['Prs', 'Spd', 'Ecal', 'Hcal']:
simConfDetList.append(det)
if "Calo" not in dstConfDetList:
dstConfDetList.append("Calo")
else:
dstConfDetList.append(det)
simConfDetList.append(det)
DstConf().setProp("Detectors", dstConfDetList)
from Configurables import SimConf
SimConf().setProp("Detectors", simConfDetList)
def _defineMonitors(self):
if self.getProp("KillDAQ"):
from Configurables import EventNodeKiller
daqKiller = EventNodeKiller("DAQKiller")
daqKiller.Nodes += ["DAQ"]
ApplicationMgr().TopAlg += [daqKiller]
ApplicationMgr().TopAlg += ["PrintHeader"]
ApplicationMgr().ExtSvc += ["ToolSvc", "DataOnDemandSvc"]
if self.getProp("LoadAll"):
from Configurables import StoreExplorerAlg, TESFingerPrint
storeExp = StoreExplorerAlg(Load=True,
PrintFreq=1,
ExploreRelations=1)
fingerPrint = TESFingerPrint(HeuristicsLevel="Medium",
OutputLevel=1)
ApplicationMgr().TopAlg += [storeExp, fingerPrint]
if self.getProp("DataContent").upper() == "DST":
from Configurables import DumpTracks
dumpTracks = DumpTracks(OutputLevel=2)
ApplicationMgr().TopAlg += ["DumpTracks"]
DstConf().EnableUnpack = ["Reconstruction", "Stripping"]
if self.getProp("WithMC"):
DigiConf().EnableUnpack = True
SimConf().EnableUnpack = True
ApplicationMgr().TopAlg += ["DumpMCEventAlg"]
if self.getProp("DataContent").upper() == "SIM":
ApplicationMgr().TopAlg += ["DumpHepMC"]
def _configureSubPackages(self):
"""
Define DB and so on
"""
# Delegate handling to LHCbApp configurable
self.setOtherProps(LHCbApp(), [
"DataType", "CondDBtag", "DDDBtag", "DQFLAGStag", "Simulation",
"IgnoreDQFlags"
])
self.setOtherProps(
PhysConf(), ["DataType", "Simulation", "InputType", "Detectors"])
self.setOtherProps(AnalysisConf(), ["DataType", "Simulation"])
self.setOtherProps(DstConf(), ["DataType"])
def __apply_configuration__(self):
GaudiKernel.ProcessJobOptions.PrintOff()
GaudiKernel.ProcessJobOptions.PrintOn()
log.info("Initializing sequences!")
self.setOtherProps(
RecSysConf(), ["SpecialData", "Context", "OutputType", "DataType"])
#if self.isPropertySet("RecoSequence") :
#self.setOtherProp(RecSysConf(),["RecoSequence"])
RecSysConf().RecoSequence = self.CheckRecoSequence()
# there is a bug in setOtherProps, so we cannot use it to set the MoniSequence.
if not self.getProp("OnlineMode"):
self.setOtherProps(RecMoniConf(), ["Context", "DataType"])
RecMoniConf().MoniSequence = self.getProp("MoniSequence")
else:
self.setOtherProps(RecMoniConf(), ["Context", "DataType"])
RecMoniConf().MoniSequence = self.getProp("MoniSequence")
RecMoniConf().Context = "Offline"
RecMoniConf().OutputLevel = FATAL
RecMoniConf().Histograms = "OfflineFull"
self.defineGeometry()
self.defineEvents()
self.defineOptions()
# database hacking for online.
if self.getProp('UseDBSnapshot'): self.configureDBSnapshot()
# Use TimingAuditor for timing, suppress printout from SequencerTimerTool
from Configurables import (ApplicationMgr, AuditorSvc,
SequencerTimerTool)
ApplicationMgr().ExtSvc += ['ToolSvc', 'AuditorSvc']
ApplicationMgr().AuditAlgorithms = True
AuditorSvc().Auditors += ['TimingAuditor']
SequencerTimerTool().OutputLevel = 4
log.info(self)
log.info(LHCbApp())
log.info(RecSysConf())
log.info(TrackSys())
if not self.getProp("OnlineMode"):
log.info(RecMoniConf())
log.info(TAlignment())
log.info(DstConf())
GaudiKernel.ProcessJobOptions.PrintOff()
Escher().DataType = 'Upgrade'
Escher().Upgrade = True
RecSysConf().Detectors = detectors
RecMoniConf().Detectors = detectors
Escher().ExpertTracking = ["kalmanSmoother"]
TrackSys().TrackExtraInfoAlgorithms = []
TrackSys().DataType = 'Upgrade'
TrackSys().Simulation = True
TrackSys().WithMC = True
#TrackSys().TrackTypes = ["Velo"]
TrackSys().TrackPatRecAlgorithms = [
"VP", "Forward", "TsaSeed", "Match", "Downstream"
]
DstConf().Detectors = detectors
hvpseq = GaudiSequencer("VPSeq")
prLHCbID2mc = PrLHCbID2MCParticle()
prPixTr = PrPixelTracking()
prPixStCl = PrPixelStoreClusters()
hvpseq.Members += [prPixStCl, prPixTr, prLHCbID2mc]
AlignAlgorithm("Alignment").ForcedInitialTime = 1
elements = Alignables()
elements.VPModules("TxTyTzRxRyRz")
# elements.VPLeft("TxTy")
# elements.VPRight("TxTyRz")
# constraints = ["Rz","Ry","Rx","Szx","Szy","SRz"]
def __apply_configuration__(self):
"""
Swimming configuration
"""
log.info("Applying Swimming configuration")
log.info(self)
if not self.getProp('SwimStripping') and not self.getProp(
'TransformName'):
raise TypeError, "No or invalid HLT transform specified when trying to swim the trigger!"
if not self.getProp('SwimStripping') and self.getProp('SwimOffSel'):
raise TypeError, "You cannot swim the trigger and offline selection in the same job!"
if self.getProp('SelectMethod') not in [
'random', 'first', 'all', 'none'
]:
raise TypeError, 'The selectMethod must be eiter "random", "first", "all" or "none".'
if type(self.getProp('OffCands')) != dict:
raise TypeError, 'OffCands must be a dict'
if type(self.getProp('StripCands')) != dict:
raise TypeError, 'StripCands must be a dict'
for key, value in self.getProp('StripCands').iteritems():
if type(value) != list or not isinstance(key, basestring):
raise TypeError, 'StripCands must be a { string : [ ] } dict'
if type(self.getProp('MuDSTCands')) != list:
raise TypeError, 'MuDSTCands must be a list'
if type(self.getProp('StrippingLines')) != list:
raise TypeError, 'StrippingLines must be a list'
if type(self.getProp('MicroDSTElements')) != list:
raise TypeError, 'MicroDSTElements must be a list'
if not self.getProp('OutputType') in ['DST', 'MDST']:
raise TypeError, "The only supported output types are DST and MDST."
if not self.getProp('SwimStripping') and self.getProp(
'OutputType') == 'MDST':
raise TypeError, "You cannot write a MicroDST when swimming the trigger."
if type(self.getProp('LifetimeFitter')) != list:
raise TypeError, "LifetimeFitter must be a list of strings."
for lifetimefitter in self.getProp('LifetimeFitter'):
if lifetimefitter not in ['LifetimeFitter', 'DecayTreeFitter']:
raise TypeError, "Allowed LifetimeFitters are LifetimeFitter and DecayTreeFitter."
if type(self.getProp('DecayTreeFitterConstraints')) != dict:
raise TypeError, "DecayTreeFitterConstraints must be a dict"
extension = self.getProp("OutputFile").rsplit(os.path.extsep, 1)[-1]
if extension.upper() != self.getProp('OutputType'):
log.warning(
"You have specified a different output file extension " +
"than OutputType; this is ignored.")
from Configurables import DataOnDemandSvc
app = LHCbApp()
self.setOtherProps(
app,
['EvtMax', 'SkipEvents', 'Simulation', 'DataType', 'Persistency'])
# Configure XMLSummarySvc
if self.getProp('XMLSummary'):
app.XMLSummary = self.getProp('XMLSummary')
from Configurables import XMLSummarySvc
XMLSummarySvc(
'CounterSummarySvc').EndEventIncident = 'SwimmingEndEvent'
DstConf(EnableUnpack=["Reconstruction", "Stripping"])
# TODO check if we need: CaloDstUnPackConf ( Enable = True )
importOptions("$STDOPTS/DecodeRawEvent.py")
appConf = ApplicationMgr()
appConf.HistogramPersistency = 'ROOT'
appConf.ExtSvc += ['DataOnDemandSvc']
EventSelector().PrintFreq = -1
EventSelector().OutputLevel = 6
if not (self.getProp('Input') == []):
from GaudiConf import IOHelper
IOHelper('ROOT').inputFiles(self.getProp('Input'))
# Swimming::Service
ApplicationMgr().ExtSvc += ['Swimming::Service']
from Configurables import Swimming__Service as Service
Service().RefitPVs = self.getProp('RefitPVs')
Service().OfflinePVLocation = self.getProp('OfflinePV')
# FileStager
if self.getProp('UseFileStager'):
from FileStager.Configuration import configureFileStager
configureFileStager()
IODataManager().UseGFAL = False
# Disable muons in TisTosTool
from Configurables import TriggerTisTos
ToolSvc().addTool(TriggerTisTos, 'TriggerTisTos')
ToolSvc().TriggerTisTos.TOSFracMuon = 0.
# Disable TT hits also
ToolSvc().TriggerTisTos.TOSFracTT = 0.
def configureOutput(self, dstType, withMC, handleLumi):
"""
Set up output stream
"""
# Merge genFSRs
if self.getProp("WriteFSR"):
if self.getProp("MergeGenFSR"):
GaudiSequencer("OutputDSTSeq").Members += ["GenFSRMerge"]
if dstType in [ "XDST", "DST", "LDST", "RDST" ]:
writerName = "DstWriter"
packType = self.getProp( "PackType" )
# event output
dstWriter = OutputStream( writerName )
dstWriter.AcceptAlgs += ["Reco"] # Write only if Rec phase completed
if handleLumi and self.getProp( "WriteLumi" ):
dstWriter.AcceptAlgs += ["LumiSeq"] # Write also if Lumi sequence completed
# set verbosity
if self.getProp( "ProductionMode" ):
if not dstWriter.isPropertySet( "OutputLevel" ):
dstWriter.OutputLevel = INFO
if self.getProp("WriteFSR"):
FSRWriter = RecordStream( "FSROutputStreamDstWriter")
if not FSRWriter.isPropertySet( "OutputLevel" ):
FSRWriter.OutputLevel = INFO
# Suppress spurious error when reading POOL files without run records
if self.getProp("WriteFSR"):
if self.getProp( "InputType" ).upper() not in [ "MDF" ]:
from Configurables import FileRecordDataSvc
FileRecordDataSvc().OutputLevel = FATAL
if dstType == "XDST":
# Allow multiple files open at once (SIM,DST,DIGI etc.)
IODataManager().AgeLimit += 1
if dstType in ["DST","XDST","LDST"] and packType not in ["MDF"]:
jseq=GaudiSequencer("RawEventSplitSeq")
#################################
# Split the Raw Event for the DST
# Use the RawEventJuggler.
# Not delegated to DSTConf.
# Some information must be shared with DSTConf
#################################
juggler=RawEventJuggler()
juggler.Sequencer=jseq
dstseq=GaudiSequencer("OutputDSTSeq")
dstseq.Members.append(jseq)
# Set the output version if not already overwritten
if juggler.isPropertySet("Output") and juggler.getProp("Output") is not None:
#it's already set
pass
else:
juggler.setProp("Output",self.getProp("SplitRawEventOutput"))
#set the input version, could come from several places
if self.isPropertySet("SplitRawEventInput") and self.getProp("SplitRawEventInput") is not None:
#if set, take it from Brunel()
juggler.setProp("Input",self.getProp("SplitRawEventInput"))
#otherwise use the setting of the juggler if it is set
elif juggler.isPropertySet("Input") and juggler.getProp("Input") is not None:
pass
#else find it from DecodeRawEvent
elif DecodeRawEvent().isPropertySet("OverrideInputs") and DecodeRawEvent().getProp("OverrideInputs") is not None:
juggler.setProp("Input",DecodeRawEvent().getProp("OverrideInputs"))
#else if I'm input with a DST, assume it is a Stripping20 type
elif self._isReprocessing(self.getProp("InputType")):
juggler.setProp("Input",2.0)
else:
#or set the default to whatever comes out of Moore by default
juggler.setProp("Input","Moore")
#share information from the Juggler with DSTConf
#always write out to where the Juggler asked!
DstConf().setProp("SplitRawEventOutput", juggler.getProp("Output"))
#or else the default in the juggler is used, should be 0.0
#TODO, handle the turned off Calo, shouldn't actually be a problem...
from RawEventCompat.Configuration import _checkv
from Configurables import RawEventFormatConf
RawEventFormatConf().loadIfRequired()
if juggler.getProp("Input")!=juggler.getProp("Output"):
if (juggler.getProp("Input") is None or juggler.getProp("Output")) is None or (_checkv(juggler.getProp("Input")))!=(_checkv(juggler.getProp("Output"))):
juggler.KillExtraBanks=True
juggler.KillExtraNodes=True
#really kill /Event/DAQ to prevent it re-appearing!
juggler.KillExtraDirectories=True
from Configurables import TrackToDST
# Filter Best Track States to be written
trackFilter = TrackToDST("FilterBestTrackStates")
from Configurables import ProcessPhase
ProcessPhase("Output").DetectorList += [ "DST" ]
GaudiSequencer("OutputDSTSeq").Members += [ trackFilter ]
### For Run 2, filter the fitted Velo tracks for PV
if( self.getProp("DataType") in self.Run2DataTypes ):
fittedVeloTracksFilter = TrackToDST("FilterFittedVeloTrackStates", veloStates = ["ClosestToBeam"])
fittedVeloTracksFilter.TracksInContainer = "Rec/Track/FittedHLT1VeloTracks"
GaudiSequencer("OutputDSTSeq").Members += [ fittedVeloTracksFilter ]
if "Muon" in self.getProp("Detectors"):
# Filter Muon Track States
muonTrackFilter = TrackToDST("FilterMuonTrackStates")
muonTrackFilter.TracksInContainer = "/Event/Rec/Track/Muon"
GaudiSequencer("OutputDSTSeq").Members += [ muonTrackFilter ]
if packType != "NONE":
# Add the sequence to pack the DST containers
packSeq = GaudiSequencer("PackDST")
DstConf().PackSequencer = packSeq
DstConf().AlwaysCreate = True
GaudiSequencer("OutputDSTSeq").Members += [ packSeq ]
# Run the packers also on Lumi only events to write empty containers
if handleLumi and self.getProp( "WriteLumi" ):
notPhysSeq = GaudiSequencer("NotPhysicsSeq")
notPhysSeq.Members += [ packSeq ]
# Define the file content
DstConf().Writer = writerName
DstConf().DstType = dstType
DstConf().PackType = packType
#In case we didn't juggle the raw event,
#We should write out the same as the input type!
if not DstConf().isPropertySet("SplitRawEventOutput"):
if self.isPropertySet("SplitRawEventInput") and self.getProp("SplitRawEventInput") is not None:
DstConf().setProp("SplitRawEventOutput",self.getProp("SplitRawEventInput"))
elif DecodeRawEvent().isPropertySet("OverrideInputs") and DecodeRawEvent().getProp("OverrideInputs") is not None:
DstConf().setProp("SplitRawEventOutput",DecodeRawEvent().getProp("SplitRawEventInput"))
if withMC:
DstConf().SimType = "Full"
elif self.getProp("DigiType").capitalize() == "Minimal":
from Configurables import PackMCVertex
GaudiSequencer("OutputDSTSeq").Members += [PackMCVertex()]
DstConf().SimType = "Minimal"
DstConf().OutputName = self.outputName()
self.setOtherProps(DstConf(),["DataType","WriteFSR"])
def defineOptions(self):
# Kept for Dirac backward compatibility
if self.getProp( "NoWarnings" ) :
log.warning("Brunel().NoWarnings=True property is obsolete and maintained for Dirac compatibility. Please use Brunel().ProductionMode=True instead")
self.setProp( "ProductionMode", True )
# Special settings for production
if self.getProp( "ProductionMode" ) :
if not self.isPropertySet( "OutputLevel" ) :
self.setProp("OutputLevel", ERROR)
if not LHCbApp().isPropertySet( "TimeStamp" ) :
LHCbApp().setProp( "TimeStamp", True )
if not self.isPropertySet( "PrintFreq" ) :
self.setProp("PrintFreq", 1000)
# HC does not exist in Run 1, so use appropriate split output
if self.getProp( "DataType" ) in self.Run1DataTypes :
if not self.isPropertySet( "SplitRawEventOutput" ) :
self.setProp( "SplitRawEventOutput", 4.0 )
# Online mode
if self.getProp( "OnlineMode" ) :
if not self.isPropertySet("Histograms") :
self.setProp("Histograms","Online")
if not CondDB().isPropertySet("Online") :
CondDB().setProp("Online", True)
inputType = self.getProp( "InputType" ).upper()
if inputType not in self.KnownInputTypes:
raise TypeError( "Invalid inputType '%s'"%inputType )
outputType = self.getProp( "OutputType" ).upper()
histOpt = self.getProp("Histograms")
if histOpt not in self.KnownHistograms:
raise RuntimeError("Unknown Histograms option '%s'"%histOpt)
withMC = self.getProp("WithMC")
if withMC:
if inputType in [ "MDF" ]:
log.warning( "WithMC = True, but InputType = '%s'. Forcing WithMC = False"%inputType )
withMC = False # Force it, MDF never contains MC truth
if outputType in [ "RDST" ]:
log.warning( "WithMC = True, but OutputType = '%s'. Forcing WithMC = False"%inputType )
withMC = False # Force it, RDST never contains MC truth
if self.getProp("WriteFSR") and self.getProp("PackType").upper() in ["MDF"]:
if hasattr( self, "WriteFSR" ): log.warning("Don't know how to write FSR to MDF output file")
self.setProp("WriteFSR", False)
if self.getProp( "MergeGenFSR") and not self.getProp( "Simulation" ):
if hasattr( self, "MergeGenFSR" ): log.warning("Cannot MergeGenFSR on real data")
self.setProp( "MergeGenFSR", False )
# Do not look for Hlt errors in data without HltDecReports bank
if self.getProp( "DataType" ) in [ "2008", "2009" ]:
self.setProp( "VetoHltErrorEvents", False )
# For simulation, change the default but allow to override
if self.getProp( "Simulation" ) and not hasattr( self, "VetoHltErrorEvents" ):
self.setProp( "VetoHltErrorEvents", False )
# Flag to handle or not LumiEvents
handleLumi = inputType in ["MDF"] and not withMC and not self.getProp('UseDBSnapshot')
# Top level configuration for skipping tracking
if self.getProp("SkipTracking"):
if inputType in ["MDF", "DIGI" ]:
raise RuntimeError( "Cannot skip tracking if tracks not present on the input file" )
if withMC:
raise RuntimeError( "SkipTracking not (yet) supported for simulation input" )
if( self.getProp("DataType") is "Upgrade"):
raise RuntimeError( "SkipTracking not (yet) supported for Upgrade configurations" )
ApplicationMgr().ExtSvc += [ "DataOnDemandSvc" ] # to decode the tracks from the DST
DstConf().setProp("EnableUnpack", ["Tracking"] )
# veto Hlt Error Events
vetoHltErrorEvents = self.getProp("VetoHltErrorEvents")
self.configureSequences( withMC, handleLumi, vetoHltErrorEvents )
self.configureInit( inputType )
self.configureInput( inputType )
self.configureOutput( outputType, withMC, handleLumi )
if withMC:
# Create associators for checking and for DST
from Configurables import ProcessPhase
ProcessPhase("MCLinks").DetectorList += self.getProp("MCLinksSequence")
# Unpack Sim data
GaudiSequencer("MCLinksUnpackSeq").Members += [ "UnpackMCParticle"]
# particle gun uses MCVertex to fake a reconstructed one
# unpacking again would lead to crash
if "pGun" not in self.getProp("SpecialData"):
GaudiSequencer("MCLinksUnpackSeq").Members += [ "UnpackMCVertex" ]
else:
# Cannot run trigger on pGun events...
L0Conf().EnsureKnownTCK=False
GaudiSequencer("MCLinksTrSeq").Members += [ "TrackAssociator" ]
GaudiSequencer("MCLinksCaloSeq").Members += [ "CaloDigit2MCLinks2Table", "CaloClusterMCTruth", "CaloHypoMCTruth" ]
# activate all configured checking (uses MC truth)
self.configureCheck( histOpt == "Expert" )
# data on demand needed to pack RichDigitSummary for DST, when reading unpacked DIGI
# Also needed to unpack MCHit containers when expert checking enabled
ApplicationMgr().ExtSvc += [ "DataOnDemandSvc" ]
# ROOT persistency for histograms
ApplicationMgr().HistogramPersistency = "ROOT"
from Configurables import RootHistCnv__PersSvc
RootHistCnv__PersSvc('RootHistCnv').ForceAlphaIds = True
if histOpt == "None" or histOpt == "":
# HistogramPersistency still needed to read in CaloPID DLLs.
# so do not set ApplicationMgr().HistogramPersistency = "NONE"
return
# Pass expert checking option to RecSys and RecMoni
if histOpt == "Expert":
DstConf().EnablePackingChecks = True
# Use a default histogram file name if not already set
if not HistogramPersistencySvc().isPropertySet( "OutputFile" ):
histosName = self.getProp("DatasetName")
if histosName == "": histosName = "Brunel"
if self.getProp( "RecL0Only" ): histosName += '-L0Yes'
if (self.evtMax() > 0): histosName += '-' + str(self.evtMax()) + 'ev'
if histOpt == "Expert": histosName += '-expert'
histosName += '-histos.root'
HistogramPersistencySvc().OutputFile = histosName
#reconfigure decoders to point to default location, if required!
if DecodeRawEvent().isPropertySet("OverrideInputs") and DecodeRawEvent().getProp("OverrideInputs") is not None:
#do nothing, it's been configured by someone else!
pass
elif self.isPropertySet("SplitRawEventInput") and self.getProp("SplitRawEventInput") is not None:
#print "WAAAAH Overriding RawEvent Locations"
DecodeRawEvent().setProp("OverrideInputs",self.getProp("SplitRawEventInput"))
elif inputType in [ "MDF", "DIGI", "XDIGI" ]:
#set to the default of what comes out of Moore
DecodeRawEvent().setProp("OverrideInputs","Moore")
#remember that the default is a long list of locations,
#starting with places which only exist _after_ brunel has run!
# Following needed to build RecSummary, even if tracking is skipped.
if self.getProp("SkipTracking"):
from TrackSys import RecoTracking
RecoTracking.DecodeTracking(["FastVelo"])
def configureSequences(self):
# Check for special data options
for option in self.getProp('SpecialData'):
if option not in self.KnownSpecialData:
raise RunTimeError("Unknown SpecialData option '%s'" % option)
escherSeq = GaudiSequencer("EscherSequencer")
#escherSeq.Context = self.getProp("Context")
ApplicationMgr().TopAlg = [escherSeq]
mainSeq = self.getProp("MainSequence")
if len(mainSeq) == 0:
self.MainSequence = self.DefaultSequence
mainSeq = self.MainSequence
escherSeq.Members += mainSeq
ProcessPhase("Init").DetectorList += self.getProp("InitSequence")
ProcessPhase("Init").Context = self.getProp("Context")
from Configurables import RecInit, TrackSys
log.info("Setting up alignment sequence")
recInit = RecInit(name="EscherInit",
PrintFreq=self.getProp("PrintFreq"))
GaudiSequencer("InitEscherSeq").Members += [recInit]
# set up the HltFilterSeq
from Configurables import HltCompositionMonitor
from Configurables import LoKi__HDRFilter as HDRFilter
hltFilterSeq = GaudiSequencer("HltFilterSeq")
from DAQSys.Decoders import DecoderDB
from DAQSys.DecoderClass import decodersForBank
from itertools import chain
hltdecs = [DecoderDB.get("HltDecReportsDecoder/Hlt1DecReportsDecoder")]
if not self.getProp("OnlineMode"):
## HLT2 decreports are only used offline.
hltdecs += [
DecoderDB.get("HltDecReportsDecoder/Hlt2DecReportsDecoder")
]
hltFilterSeq.Members = [d.setup() for d in hltdecs]
## FIXME: These lines should go back in as soon as an easy to use filter
## FIXME: is available that works for HLT1 and HLT2 decreports at the same time.
## identifies events that are not of type Hlt1ErrorEvent or Hlt2ErrorEvent
## hltErrCode = "HLT_PASS_RE('Hlt1(?!ErrorEvent).*Decision') & HLT_PASS_RE('Hlt2(?!ErrorEvent).*Decision')"
## hltErrorFilter = HDRFilter('HltErrorFilter', Code = hltErrCode ) # the filter
## hltFilterSeq.Members += [ HltCompositionMonitor(), hltErrorFilter ]
## add more hlt filters, if requested
## if hasattr(self,"HltFilterCode") and len(self.getProp("HltFilterCode"))>0:
## hltfilter = HDRFilter ( 'HLTFilter',
## Code = self.getProp("HltFilterCode"))
## hltfilter.Preambulo += [ "from LoKiCore.functions import *" ]
## hltFilterSeq.Members += [ hltfilter ]
# in Escher we'll always use the DOD
ApplicationMgr().ExtSvc += ["DataOnDemandSvc"]
alignSeq = GaudiSequencer("AlignSequence")
# if the patter reco is not run, we need the DataOnDemand svc
# so that e.g. the track container(s) is unpacked:
if not GaudiSequencer("RecoTrSeq").getProp("Enable"):
DstConf(EnableUnpack=True)
# Setup tracking sequence
trackConf = TrackSys()
self.setOtherProps(trackConf, [
"SpecialData", "OutputType", "DataType", "Simulation", "GlobalCuts"
])
trackConf.ExpertTracking = self.getProp("ExpertTracking")
ta = TAlignment()
ta.Upgrade = self.getProp("Upgrade")
self.setOtherProps(ta,
["DatasetName", "OnlineMode", "OnlineAligWorkDir"])
ta.Sequencer = alignSeq
if self.getProp("Millepede"):
log.info("Using Millepede type alignment!")
self.setProp("Incident", "GlobalMPedeFit")
ta.Method = "Millepede"
ta.Sequencer = GaudiSequencer("MpedeAlignSeq")
# Example 2010 collisions options for RichParticleSearch
# Syntax is:
# gaudirun.py myOptions.py
#
from GaudiKernel.ProcessJobOptions import importOptions
importOptions("$APPCONFIGOPTS/Brunel/DataType-2011.py")
from Gaudi.Configuration import *
from Configurables import Brunel, LHCbApp, CondDB, CondDBAccessSvc, ApplicationMgr
# Run faster over dsts
from Configurables import DstConf
ApplicationMgr().ExtSvc += ["DataOnDemandSvc"]
DstConf().EnableUnpack = ["Reconstruction"]
from Configurables import RichRecSysConf
rConf = RichRecSysConf("RichOfflineRec")
##faster photon reconstruction
rConf.richTools().photonReco().FindUnambiguousPhotons = [False, False, False]
#
#rConf.richTools().PhotonRecoType = "EstiFromRadius"#use for faster photon reconstruction!!
#Brunel options
Brunel().DataType = "2011"
Brunel().EvtMax = -1
Brunel().PrintFreq = 1
Brunel().OutputType = "None"
Brunel().InitSequence = ["Brunel"]
Brunel().RecoSequence = ["RICH"]
HltConfigSvc().ApplyTransformation = thisTransform
#
# Define the swimming algorithm
#
myswimmer = HltMoveVerticesForSwimming("HltMovePVs4Swimming")
myswimmer.SwimmingDistance = 0.0
myswimmer.Bcontainer = offCands if options.select == 'none' else swimCands
myswimmer.InputSelection = options.onlinePV
myswimmer.OutputSelection = options.outPVSel
myswimmer.OutputLevel = 4
#The general setup
from Swimming import GeneralSetup
from Configurables import DstConf, CaloDstUnPackConf
CaloDstUnPackConf(Enable=True)
DstConf(EnableUnpack=True) #
ApplicationMgr().TopAlg = [deathstar] + ApplicationMgr().TopAlg
# New persistency
if options.ROOT:
from GaudiConf import IOHelper
IOHelper("ROOT", "ROOT").postConfigServices()
# FileStager
if options.filestager:
from FileStager.Configuration import configureFileStager
configureFileStager()
# Disable muons in TisTosTool
from Configurables import TriggerTisTos
ToolSvc().addTool(TriggerTisTos, 'TriggerTisTos')
def _configureForOnline(self):
#
DecodeRawEvent().DataOnDemand=False
writer=InputCopyStream( self.writerName )
DstConf().setProp("SplitRawEventOutput", self.getProp("RawFormatVersion"))
# Use RawEventJuggler to create the Turbo stream raw event format
tck = "0x409f0045" # DUMMY
TurboBanksSeq=GaudiSequencer("TurboBanksSeq")
RawEventJuggler().TCK=tck
RawEventJuggler().Input="Moore"
RawEventJuggler().Output=self.getProp("RawFormatVersion")
RawEventJuggler().Sequencer=TurboBanksSeq
RawEventJuggler().WriterOptItemList=writer
RawEventJuggler().KillExtraNodes=True
RawEventJuggler().KillExtraBanks=True
RawEventJuggler().KillExtraDirectories = True
self.teslaSeq.Members += [TurboBanksSeq]
# Begin Lumi configuration
lumiSeq = GaudiSequencer("LumiSeq")
#
# Add ODIN decoder to LumiSeq ***
from DAQSys.Decoders import DecoderDB
CreateODIN=DecoderDB["createODIN"].setup()
#********************************
#
# Main algorithm config
lumiCounters = GaudiSequencer("LumiCounters")
lumiCounters.Members+=[CreateODIN]
lumiSeq.Members += [ lumiCounters ]
LumiAlgsConf().LumiSequencer = lumiCounters
LumiAlgsConf().OutputLevel = self.getProp('OutputLevel')
LumiAlgsConf().InputType = "MDF"
#
# Filter out Lumi only triggers from further processing, but still write to output
# Trigger masks changed in 2016, see LHCBPS-1486
physFilterRequireMask = []
lumiFilterRequireMask = []
if self.getProp( "DataType" ) in ["2012","2015"]: # 2012 needed for nightlies tests.
physFilterRequireMask = [ 0x0, 0x4, 0x0 ]
lumiFilterRequireMask = [ 0x0, 0x2, 0x0 ]
else:
physFilterRequireMask = [ 0x0, 0x0, 0x80000000 ]
lumiFilterRequireMask = [ 0x0, 0x0, 0x40000000 ]
from Configurables import HltRoutingBitsFilter
physFilter = HltRoutingBitsFilter( "PhysFilter", RequireMask = physFilterRequireMask )
lumiFilter = HltRoutingBitsFilter( "LumiFilter", RequireMask = lumiFilterRequireMask )
lumiSeq.Members += [ lumiFilter, physFilter ]
lumiSeq.ModeOR = True
#
from Configurables import RecordStream
FSRWriter = RecordStream( "FSROutputStreamDstWriter")
FSRWriter.OutputLevel = INFO
#
# Sequence to be executed if physics sequence not called (nano events)
notPhysSeq = GaudiSequencer("NotPhysicsSeq")
notPhysSeq.ModeOR = True
notPhysSeq.Members = [ physFilter ]
writer.AcceptAlgs += ["LumiSeq","NotPhysicsSeq"]
self.teslaSeq.Members += [lumiSeq, notPhysSeq]
def configureReco(self, init):
"""
Configure Reconstruction to be redone
"""
## CaloReco & CaloPIDs on-demand
clusters = ['Digits', 'Clusters']
from Configurables import CaloProcessor
caloProc = CaloProcessor(EnableOnDemand=True,
OutputLevel=self.getProp("OutputLevel"))
caloProc.RecList = clusters
# ---
if self.getProp('DataType') == 'Upgrade':
caloProc.NoSpdPrs = True
## General unpacking
from Configurables import DstConf
if self.isPropertySet('EnableUnpack'):
DstConf().setProp('EnableUnpack', self.getProp('EnableUnpack'))
## unpack Calo Hypos ?
from Configurables import CaloDstUnPackConf
unpack = CaloDstUnPackConf()
hypos = ['Photons', 'MergedPi0s', 'SplitPhotons',
'Electrons'] # CaloHypos
if self.isPropertySet(
'EnableUnpack') and "Reconstruction" in self.getProp(
'EnableUnpack'):
unpack.setProp('Enable', True)
else:
caloProc.RecList += hypos # enable caloHypos onDemand
# Reprocess explicitely the full calo sequence in the init sequence ?
inputtype = self.getProp('InputType').upper()
if (self.getProp("CaloReProcessing") and inputtype != 'MDST'):
caloProc.RecList = clusters + hypos
caloSeq = caloProc.sequence(
) # apply the CaloProcessor configuration
cSeq = GaudiSequencer('CaloReProcessing')
cSeq.Members += [caloSeq]
init.Members += [cSeq]
unpack.setProp('Enable', False)
# update CaloHypo->MC Linker
if self.getProp('Simulation'):
log.info(
"CaloReprocessing : obsolete CaloHypo2MC Links is updated")
from Configurables import (TESCheck, EventNodeKiller,
CaloHypoMCTruth)
caloMCLinks = ["Link/Rec/Calo"]
caloMCSeq = GaudiSequencer("cleanCaloMCLinks")
checkCaloMCLinks = TESCheck("checkCaloMCLinks")
checkCaloMCLinks.Inputs = caloMCLinks
checkCaloMCLinks.Stop = False
killCaloMCLinks = EventNodeKiller("killCaloMCLinks")
killCaloMCLinks.Nodes = caloMCLinks
caloMCSeq.Members = [checkCaloMCLinks, killCaloMCLinks]
init.Members += [caloMCSeq]
update = self.getProp("UpdateCaloMCLinks")
if update:
redoCaloMCLinks = CaloHypoMCTruth("recreteCaloMCLinks")
init.Members += [redoCaloMCLinks]
else:
caloProc.applyConf()
if inputtype != 'MDST':
log.info(
"CaloReProcessing cannot be processed on reduced (m)DST data"
)
# For backwards compatibility with MC09, we need the following to rerun
# the Muon Reco on old data. To be removed AS SOON as this backwards compatibility
# is no longer needed
if (self.getProp("DataType") == 'MC09' and inputtype != 'MDST'
and self.getProp("AllowPIDRerunning") and inputtype != 'RDST'):
from Configurables import DataObjectVersionFilter, MuonRec, TESCheck
from MuonID import ConfiguredMuonIDs
rerunPIDSeq = GaudiSequencer("ReRunMuonPID")
init.Members += [rerunPIDSeq]
# Check data version, to see if this is needed or not
rerunPIDSeq.Members += [
DataObjectVersionFilter(
"MuonPIDVersionCheck",
DataObjectLocation="/Event/Rec/Muon/MuonPID",
MaxVersion=0)
]
# Check raw event is available
rerunPIDSeq.Members += [
TESCheck("TESCheckRawEvent",
Inputs=["DAQ/RawEvent"],
Stop=False)
]
# Run Muon PID
cm = ConfiguredMuonIDs.ConfiguredMuonIDs(
data=self.getProp("DataType"))
rerunPIDSeq.Members += [MuonRec(), cm.getMuonIDSeq()]
# If muon PID has rerun, need to re make the Combined DLLS...
from Configurables import (ChargedProtoParticleAddMuonInfo,
ChargedProtoCombineDLLsAlg)
rerunPIDSeq.Members += [
ChargedProtoParticleAddMuonInfo("CProtoPAddNewMuon"),
ChargedProtoCombineDLLsAlg("CProtoPCombDLLNewMuon")
]
# Compatibility with pre-2011 data, where Rec/Summary and Trigger/RawEvent are missing
import PhysConf.CheckMissingTESData as DataCheck
DataCheck.checkForMissingData()
PhysConf().OutputLevel = appMgr.OutputLevel
#AnalysisConf().OutputLevel = appMgr.OutputLevel
datatype = "2015"
PhysConf().DataType = datatype
AnalysisConf().DataType = datatype
LumiAlgsConf().DataType = datatype
DDDBConf().DataType = datatype
inputType = "DST"
LumiAlgsConf().InputType = inputType
PhysConf().InputType = inputType
unPack = ["Reconstruction"]
PhysConf().EnableUnpack = unPack
DstConf().EnableUnpack = unPack
lumiSeq = GaudiSequencer("LumiSeq")
LumiAlgsConf().LumiSequencer = lumiSeq
appMgr.TopAlg += [ PhysConf().initSequence(),
AnalysisConf().initSequence(),
sc.sequence(), lumiSeq ]
#from Configurables import DaVinci
#DaVinci().ProductionType = "Stripping"
#DaVinci().DataType = datatype
#DaVinci().DDDBtag = LHCbApp().DDDBtag
#DaVinci().CondDBtag = LHCbApp().CondDBtag
#DaVinci().appendToMainSequence( [ sc.sequence() ] )
if options.data:
importOptions(options.data)
## Moore settings
app = LHCbApp()
app.EvtMax = options.nevents
app.CondDBtag = 'sim-20131023-vc-md100'
app.DDDBtag = 'dddb-20130929-1'
app.DataType = '2015'
app.Simulation = True
ApplicationMgr().HistogramPersistency = "ROOT"
PhysConf(EnableUnpack = ["Reconstruction", "Stripping"])
DstConf(EnableUnpack = ["Reconstruction", "Stripping"])
if app.getProp('Simulation'):
from Configurables import SimConf
SimConf(EnableUnpack = True, EnablePack = False)
EventSelector().PrintFreq = 100
eos_dir = '/eos/lhcb/grid/prod/lhcb/MC/Dev/XDST/00034704/0000'
p = subprocess.Popen(['/afs/cern.ch/project/eos/installation/0.3.15/bin/eos.select', 'ls', eos_dir],
stdout = subprocess.PIPE, stderr = subprocess.STDOUT)
o, e = p.communicate()
input_files = sorted(['root://eoslhcb.cern.ch/' + os.path.join(eos_dir, f.strip()) for f in o.split()])
seq = GaudiSequencer( "TopSequence" )
from Configurables import ( DecodeVeloRawBuffer, RawBankToSTLiteClusterAlg,
def add_line_tuple_sequence(self, linesettings,
toolList = ["TupleToolPropertime",
"TupleToolKinematic",
"TupleToolGeometry",
"TupleToolEventInfo",
"TupleToolPrimaries",
"TupleToolPid",
"TupleToolANNPID",
"TupleToolTrackInfo",
"TupleToolRecoStats",],
mcToolList = ['TupleToolMCTruth',
'TupleToolMCBackgroundInfo',
'MCTupleToolPrompt'],
L0List = [],
HLT1List = [],
HLT2List = [],
strippingList = [],
aliases = {},
labXAliases = False,
substitutions = {}) :
if not isinstance(linesettings, dict) :
linesettings = self.get_line_settings(*linesettings)
isTrigger = is_trigger(linesettings['version'])
rootInTES = linesettings['rootInTES']
linename = linesettings['linename']
version = linesettings['version']
decayDescs = linesettings['decayDescs']
inputlocation = linesettings['inputLocation']
if self.getProp('Simulation') :
rootInTES = '/'.join(rootInTES.split('/')[:-1] + ['AllStreams'])
if self.getProp('InputType').lower() != 'mdst' :
inputlocation = os.path.join(rootInTES, inputlocation)
rootInTES = ''
self.RootInTES = rootInTES
if isTrigger :
from Configurables import DstConf
dstconf = DstConf()
dstconf.Turbo = True
self.extraobjs.add(dstconf)
lineseq = GaudiSequencer(linename + '-Sequence')
if substitutions :
subs = {}
for i, desc in enumerate(decayDescs) :
descsubs, newdesc = desc.get_substitutions(substitutions)
subs.update(descsubs)
decayDescs[i] = newdesc
newinputlocation = inputlocation.split('/')
newinputlocation[-2] += '-SubPID'
newinputlocation = '/'.join(newinputlocation)
subpid = SubstitutePID(linename + '-SubPID',
Code = 'ALL',
Substitutions = subs,
Inputs = [inputlocation],
Output = newinputlocation)
lineseq.Members += [subpid]
inputlocation = newinputlocation
for desc in decayDescs :
if labXAliases :
desc.set_labX_aliases()
elif aliases :
desc.set_aliases(aliases)
desctuple = DecayTreeTuple(desc.get_full_alias() + 'Tuple',
ToolList = [])
desctuple.configure_for_line(desc, inputlocation,
linename, version,
self.getProp('Simulation'),
toolList,
mcToolList,
L0List, HLT1List, HLT2List,
strippingList)
lineseq.Members.append(desctuple)
self.UserAlgorithms.append(lineseq)
return linesettings, lineseq
def configureOutput(self, dstType):
"""
Set up output stream
"""
if dstType in ["DST", "RDST"]:
if hasattr(self, "Persistency"):
if self.getProp("Persistency") is not None:
DstConf().Persistency = self.getProp("Persistency")
writerName = "DstWriter"
packType = self.getProp("PackType")
# Do not pack DC06 DSTs, for consistency with existing productions
if self.getProp("DataType") == "DC06": packType = "NONE"
dstWriter = OutputStream(writerName)
dstWriter.RequireAlgs += ["Reco"
] # Write only if Rec phase completed
# Set a default output file name if not already defined in the user job options
if not hasattr(dstWriter, "Output"):
DstConf().OutputName = self.outputName()
# Define the file content
DstConf().Writer = writerName
DstConf().DstType = dstType
DstConf().PackType = packType
DstConf().setProp("WriteFSR", self.getProp("WriteFSR"))
if hasattr(self, "Persistency"):
if self.getProp("Persistency") is not None:
DstConf().setProp("Persistency",
self.getProp("Persistency"))
from Configurables import TrackToDST
if dstType == "DST":
# Sequence for altering DST content
ProcessPhase("Output").DetectorList += ["DST"]
# Filter Track States to be written
trackFilter = TrackToDST()
else:
# Sequence for altering content of rDST compared to DST
ProcessPhase("Output").DetectorList += ["L0", "DST"]
# Filter Track States to be written
trackFilter = TrackToDST("TrackToRDST")
trackFilter.veloStates = ["ClosestToBeam"]
trackFilter.longStates = ["ClosestToBeam"]
trackFilter.TTrackStates = ["FirstMeasurement"]
trackFilter.downstreamStates = ["FirstMeasurement"]
trackFilter.upstreamStates = ["ClosestToBeam"]
GaudiSequencer("OutputDSTSeq").Members += [trackFilter]
if packType != "NONE":
# Add the sequence to pack the DST containers
packSeq = GaudiSequencer("PackDST")
DstConf().PackSequencer = packSeq
DstConf().AlwaysCreate = True
GaudiSequencer("OutputDSTSeq").Members += [packSeq]
# Always write an ETC if ETC input
if self.getProp("InputType").upper() == "ETC":
raise DeprecationWarning, "ETC are no longer supported by LHCb"
etcWriter = TagCollectionSvc("EvtTupleSvc")
ApplicationMgr().ExtSvc.append(etcWriter)
ApplicationMgr().OutStream.append("GaudiSequencer/SeqTagWriter")
importOptions("$ESCHEROPTS/DefineETC.opts")
if not hasattr(etcWriter, "Output"):
etcWriter.Output = [
"EVTTAGS2 DATAFILE='" + self.getProp("DatasetName") +
"-etc.root' TYP='POOL_ROOTTREE' OPT='RECREATE' "
]
# Do not print event number at every event (done already by Brunel)
EventSelector().PrintFreq = -1
CountingPrescaler("EscherPrescaler").PrintFreq = self.getProp(
"PrintFreq")
# Modify printout defaults
if self.getProp("NoWarnings"):
importOptions("$ESCHEROPTS/SuppressWarnings.opts")
from Brunel.Configuration import *
from Configurables import Brunel, LHCbApp
importOptions("CKRefractCalib-FullBrunelReco.py")
Brunel().InputType = "DST"
from Configurables import DstConf
ApplicationMgr().ExtSvc += ["DataOnDemandSvc"]
DstConf().EnableUnpack = True
from Configurables import RecMoniConf
RecMoniConf().MoniSequence = ["RICH"]
Brunel().RecoSequence = ["RICH"]
Brunel().InitSequence = ["Brunel"]
Brunel().MCCheckSequence = ["RICH"]
from Gaudi.Configuration import *
from LHCbKernel.Configuration import *
from Configurables import GaudiSequencer, RawEventJuggler
from Configurables import DaVinci
from Configurables import DecodeRawEvent
from Configurables import DstConf
DstConf().Turbo = True
DaVinci()
DaVinci().EvtMax = -1
DaVinci().DataType = "2015"
from GaudiConf import IOHelper
IOHelper().inputFiles(["tesla_2015_TCK.dst"], clear=True)
import GaudiPython
from Gaudi.Configuration import ApplicationMgr
from Configurables import LoKiSvc
from GaudiKernel import ROOT6WorkAroundEnabled
if ROOT6WorkAroundEnabled('ROOT-7492'):
# trigger autoloading of LHCbKernel dictionary
GaudiPython.gbl.LHCb.LHCbID
# trigger autoloading of DigiEvent dictionary
GaudiPython.gbl.LHCb.CaloDigit
gaudi = GaudiPython.AppMgr()
gaudi.initialize()
TES = gaudi.evtsvc()
def add_line_tuple_sequence(self, linesettings,
toolList = ["TupleToolPropertime",
"TupleToolKinematic",
"TupleToolGeometry",
"TupleToolEventInfo",
"TupleToolPrimaries",
"TupleToolPid",
"TupleToolANNPID",
"TupleToolTrackInfo",
"TupleToolRecoStats",],
mcToolList = ['TupleToolMCTruth',
'TupleToolMCBackgroundInfo',
'MCTupleToolPrompt'],
L0List = [],
HLT1List = [],
HLT2List = [],
strippingList = [],
aliases = {},
labXAliases = False,
substitutions = {},
suffix = '') :
if not isinstance(linesettings, dict) :
linesettings = self.get_line_settings(*linesettings)
isTrigger = is_trigger(linesettings['version'])
rootInTES = linesettings['rootInTES']
linename = linesettings['linename']
version = linesettings['version']
decayDescs = linesettings['decayDescs']
inputlocation = linesettings['inputLocation']
if self.getProp('Simulation') and not isTrigger :
rootInTES = '/'.join(rootInTES.split('/')[:-1] + ['AllStreams'])
if self.getProp('InputType').lower() != 'mdst' :
inputlocation = os.path.join(rootInTES, inputlocation)
rootInTES = ''
self.RootInTES = rootInTES
if isTrigger :
from Configurables import DstConf
dstconf = DstConf()
dstconf.Turbo = True
self.extraobjs.add(dstconf)
lineseq = GaudiSequencer(linename + '-Sequence')
if substitutions :
subs = {}
for i, desc in enumerate(decayDescs) :
descsubs, newdesc = desc.get_substitutions(substitutions)
subs.update(descsubs)
decayDescs[i] = newdesc
newinputlocation = inputlocation.split('/')
newinputlocation[-2] += '-SubPID'
newinputlocation = '/'.join(newinputlocation)
subpid = SubstitutePID(linename + '-SubPID',
Code = 'ALL',
Substitutions = subs,
Inputs = [inputlocation],
Output = newinputlocation)
lineseq.Members += [subpid]
inputlocation = newinputlocation
for desc in decayDescs :
if labXAliases :
desc.set_labX_aliases()
elif aliases :
desc.set_aliases(aliases)
desctuple = DecayTreeTuple(desc.get_full_alias() + suffix + 'Tuple',
ToolList = [])
desctuple.configure_for_line(desc, inputlocation,
linename, version,
self.getProp('Simulation'),
toolList,
mcToolList,
L0List, HLT1List, HLT2List,
strippingList)
lineseq.Members.append(desctuple)
self.UserAlgorithms.append(lineseq)
return linesettings, lineseq
