def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[self.fileIdx])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
line = p.stderr.readline()
while(len(line) > 0):
line = line.rstrip()
self.progressLog.append(line)
line = p.stderr.readline()
self.returnCode = p.wait()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
if len(self.filelist) > 1:
self._stitchMultiExtruder()
gcodeFilename = sliceRun.getExportFilename(self.filelist[0])
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Running plugins")
ret = profile.runPostProcessingPlugins(gcodeFilename)
if ret != None:
self.progressLog.append(ret)
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def main():
parser = OptionParser(usage="usage: %prog [options] <X,Y> <filename>[, <X,Y> <filename>][, ...]")
parser.add_option("-p", "--profile", action="store", type="string", dest="profile",
help="Encoded profile to use for the print")
parser.add_option("-o", "--output", action="store", type="string", dest="output",
help="Output filename")
(options, args) = parser.parse_args()
if options.output is None:
print 'Missing output filename'
sys.exit(1)
if options.profile is not None:
profile.loadGlobalProfileFromString(options.profile)
options.output = fixUTF8(options.output)
clearZ = 0
resultFile = open(options.output, "w")
for idx in xrange(0, len(args), 2):
position = map(float, args[idx].split(','))
if len(position) < 9 + 2:
position = position[0:2]
position += [1,0,0]
position += [0,1,0]
position += [0,0,1]
filenames = fixUTF8(args[idx + 1]).split('|')
profile.setTempOverride('object_center_x', position[0])
profile.setTempOverride('object_center_y', position[1])
if idx == 0:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('start.gcode').replace('?filename?', ' '.join(filenames).encode('ascii', 'replace')))
else:
resultFile.write(';TYPE:CUSTOM\n')
n = output[-1].rfind('Z')+1
zString = output[-1][n:n+20]
zString = zString[0:zString.find(' ')]
clearZ = max(clearZ, float(zString) + 10)
profile.setTempOverride('clear_z', clearZ)
resultFile.write(profile.getAlterationFileContents('nextobject.gcode').replace('?filename?', ' '.join(filenames).encode('ascii', 'replace')))
output = []
for filename in filenames:
extruderNr = filenames.index(filename)
profile.resetTempOverride()
if extruderNr > 0:
profile.setTempOverride('object_center_x', position[0] - profile.getPreferenceFloat('extruder_offset_x%d' % (extruderNr)))
profile.setTempOverride('object_center_y', position[1] - profile.getPreferenceFloat('extruder_offset_y%d' % (extruderNr)))
profile.setTempOverride('fan_enabled', 'False')
profile.setTempOverride('skirt_line_count', '0')
profile.setTempOverride('alternative_center', filenames[0])
else:
profile.setTempOverride('object_center_x', position[0])
profile.setTempOverride('object_center_y', position[1])
profile.setTempOverride('object_matrix', ','.join(map(str, position[2:11])))
output.append(export.getOutput(filename))
profile.resetTempOverride()
if len(output) == 1:
resultFile.write(output[0])
else:
stitchMultiExtruder(output, resultFile)
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
print "Running plugins"
ret = profile.runPostProcessingPlugins(options.output)
if ret is not None:
print ret
print "Finalizing %s" % (os.path.basename(options.output))
def main():
parser = OptionParser(
usage=
"usage: %prog [options] <X,Y> <filename>[, <X,Y> <filename>][, ...]")
parser.add_option("-p",
"--profile",
action="store",
type="string",
dest="profile",
help="Encoded profile to use for the print")
parser.add_option("-o",
"--output",
action="store",
type="string",
dest="output",
help="Output filename")
(options, args) = parser.parse_args()
if options.output is None:
print 'Missing output filename'
sys.exit(1)
if options.profile is not None:
profile.loadGlobalProfileFromString(options.profile)
options.output = fixUTF8(options.output)
clearZ = 0
resultFile = open(options.output, "w")
for idx in xrange(0, len(args), 2):
position = map(float, args[idx].split(','))
if len(position) < 9 + 2:
position = position[0:2]
position += [1, 0, 0]
position += [0, 1, 0]
position += [0, 0, 1]
filenames = fixUTF8(args[idx + 1]).split('|')
profile.setTempOverride('object_center_x', position[0])
profile.setTempOverride('object_center_y', position[1])
if idx == 0:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(
profile.getAlterationFileContents(
'start.gcode', len(filenames)).replace(
'?filename?',
' '.join(filenames).encode('ascii', 'replace')))
else:
resultFile.write(';TYPE:CUSTOM\n')
n = output[-1].rfind('Z') + 1
zString = output[-1][n:n + 20]
zString = zString[0:zString.find(' ')]
clearZ = max(clearZ, float(zString) + 10)
profile.setTempOverride('clear_z', clearZ)
print position
print profile.getAlterationFileContents('nextobject.gcode')
resultFile.write(
profile.getAlterationFileContents('nextobject.gcode').replace(
'?filename?',
' '.join(filenames).encode('ascii', 'replace')))
output = []
for filename in filenames:
extruderNr = filenames.index(filename)
profile.resetTempOverride()
if extruderNr > 0:
profile.setTempOverride(
'object_center_x', position[0] -
profile.getPreferenceFloat('extruder_offset_x%d' %
(extruderNr)))
profile.setTempOverride(
'object_center_y', position[1] -
profile.getPreferenceFloat('extruder_offset_y%d' %
(extruderNr)))
profile.setTempOverride('fan_enabled', 'False')
profile.setTempOverride('skirt_line_count', '0')
profile.setTempOverride('alternative_center', filenames[0])
else:
profile.setTempOverride('object_center_x', position[0])
profile.setTempOverride('object_center_y', position[1])
profile.setTempOverride('object_matrix',
','.join(map(str, position[2:11])))
if extruderNr > 0:
if profile.getProfileSettingFloat('filament_diameter%d' %
(extruderNr + 1)) > 0:
profile.setTempOverride(
'filament_diameter',
profile.getProfileSetting('filament_diameter%d' %
(extruderNr + 1)))
print extruderNr, profile.getPreferenceFloat(
'extruder_offset_x%d' %
(extruderNr)), profile.getPreferenceFloat(
'extruder_offset_y%d' % (extruderNr))
output.append(export.getOutput(filename))
profile.resetTempOverride()
if len(output) == 1:
resultFile.write(output[0])
else:
stitchMultiExtruder(output, resultFile)
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
print "Running plugins"
ret = profile.runPostProcessingPlugins(options.output)
if ret is not None:
print ret
print "Finalizing %s" % (os.path.basename(options.output))
if profile.getPreference('submit_slice_information') == 'True':
filenames = fixUTF8(args[idx + 1]).split('|')
for filename in filenames:
m = hashlib.sha512()
f = open(filename, "rb")
while True:
chunk = f.read(1024)
if not chunk:
break
m.update(chunk)
f.close()
data = {
'processor': platform.processor(),
'machine': platform.machine(),
'platform': platform.platform(),
'profile': profile.getGlobalProfileString(),
'preferences': profile.getGlobalPreferencesString(),
'modelhash': m.hexdigest(),
'version': version.getVersion(),
}
try:
f = urllib2.urlopen("http://platform.ultimaker.com/curastats/",
data=urllib.urlencode(data),
timeout=5)
f.read()
f.close()
except:
pass
def _watchProcess(self, commandList, oldThread):
if oldThread is not None:
if self._process is not None:
self._process.terminate()
oldThread.join()
self._id += 1
self._callback(-1.0, False)
try:
self._process = self._runSliceProcess(commandList)
except OSError:
traceback.print_exc()
return
if self._thread != threading.currentThread():
self._process.terminate()
self._callback(0.0, False)
self._sliceLog = []
self._printTimeSeconds = None
self._filamentMM = [0.0, 0.0]
line = self._process.stdout.readline()
objectNr = 0
while len(line):
line = line.strip()
if line.startswith('Progress:'):
line = line.split(':')
if line[1] == 'process':
objectNr += 1
elif line[1] in self._progressSteps:
progressValue = float(line[2]) / float(line[3])
progressValue /= len(self._progressSteps)
progressValue += 1.0 / len(self._progressSteps) * self._progressSteps.index(line[1])
progressValue /= self._objCount
progressValue += 1.0 / self._objCount * objectNr
try:
self._callback(progressValue, False)
except:
pass
elif line.startswith('Print time:'):
self._printTimeSeconds = int(line.split(':')[1].strip())
elif line.startswith('Filament:'):
self._filamentMM[0] = int(line.split(':')[1].strip())
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
radius = profile.getProfileSettingFloat('filament_diameter') / 2.0
self._filamentMM[0] /= (math.pi * radius * radius)
elif line.startswith('Filament2:'):
self._filamentMM[1] = int(line.split(':')[1].strip())
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
radius = profile.getProfileSettingFloat('filament_diameter') / 2.0
self._filamentMM[1] /= (math.pi * radius * radius)
else:
self._sliceLog.append(line.strip())
line = self._process.stdout.readline()
for line in self._process.stderr:
self._sliceLog.append(line.strip())
returnCode = self._process.wait()
try:
if returnCode == 0:
pluginError = profile.runPostProcessingPlugins(self._exportFilename)
if pluginError is not None:
print pluginError
self._sliceLog.append(pluginError)
self._callback(1.0, True)
else:
for line in self._sliceLog:
print line
self._callback(-1.0, False)
except:
pass
self._process = None
def main():
parser = OptionParser(usage="usage: %prog [options] <X,Y> <filename>[, <X,Y> <filename>][, ...]")
parser.add_option("-p", "--profile", action="store", type="string", dest="profile",
help="Encoded profile to use for the print")
parser.add_option("-o", "--output", action="store", type="string", dest="output",
help="Output filename")
(options, args) = parser.parse_args()
if options.output is None:
print 'Missing output filename'
sys.exit(1)
if options.profile is not None:
profile.loadGlobalProfileFromString(options.profile)
options.output = fixUTF8(options.output)
clearZ = 0
resultFile = open(options.output, "w")
for idx in xrange(0, len(args), 2):
position = map(float, args[idx].split(','))
if len(position) < 9 + 2:
position = position[0:2]
position += [1,0,0]
position += [0,1,0]
position += [0,0,1]
filenames = fixUTF8(args[idx + 1]).split('|')
profile.setTempOverride('object_center_x', position[0])
profile.setTempOverride('object_center_y', position[1])
if idx == 0:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('start.gcode', len(filenames)).replace('?filename?', ' '.join(filenames).encode('ascii', 'replace')))
else:
resultFile.write(';TYPE:CUSTOM\n')
n = output[-1].rfind('Z')+1
zString = output[-1][n:n+20]
zString = zString[0:zString.find(' ')]
clearZ = max(clearZ, float(zString) + 10)
profile.setTempOverride('clear_z', clearZ)
print position
print profile.getAlterationFileContents('nextobject.gcode')
resultFile.write(profile.getAlterationFileContents('nextobject.gcode').replace('?filename?', ' '.join(filenames).encode('ascii', 'replace')))
output = []
for filename in filenames:
extruderNr = filenames.index(filename)
profile.resetTempOverride()
if extruderNr > 0:
profile.setTempOverride('object_center_x', position[0] - profile.getPreferenceFloat('extruder_offset_x%d' % (extruderNr)))
profile.setTempOverride('object_center_y', position[1] - profile.getPreferenceFloat('extruder_offset_y%d' % (extruderNr)))
profile.setTempOverride('fan_enabled', 'False')
profile.setTempOverride('skirt_line_count', '0')
profile.setTempOverride('alternative_center', filenames[0])
else:
profile.setTempOverride('object_center_x', position[0])
profile.setTempOverride('object_center_y', position[1])
profile.setTempOverride('object_matrix', ','.join(map(str, position[2:11])))
if extruderNr > 0:
if profile.getProfileSettingFloat('filament_diameter%d' % (extruderNr + 1)) > 0:
profile.setTempOverride('filament_diameter', profile.getProfileSetting('filament_diameter%d' % (extruderNr + 1)))
print extruderNr, profile.getPreferenceFloat('extruder_offset_x%d' % (extruderNr)), profile.getPreferenceFloat('extruder_offset_y%d' % (extruderNr))
output.append(export.getOutput(filename))
profile.resetTempOverride()
if len(output) == 1:
resultFile.write(output[0])
else:
stitchMultiExtruder(output, resultFile)
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
print "Running plugins"
ret = profile.runPostProcessingPlugins(options.output)
if ret is not None:
print ret
print "Finalizing %s" % (os.path.basename(options.output))
if profile.getPreference('submit_slice_information') == 'True':
filenames = fixUTF8(args[idx + 1]).split('|')
for filename in filenames:
m = hashlib.sha512()
f = open(filename, "rb")
while True:
chunk = f.read(1024)
if not chunk:
break
m.update(chunk)
f.close()
data = {
'processor': platform.processor(),
'machine': platform.machine(),
'platform': platform.platform(),
'profile': profile.getGlobalProfileString(),
'preferences': profile.getGlobalPreferencesString(),
'modelhash': m.hexdigest(),
'version': version.getVersion(),
}
try:
f = urllib2.urlopen("http://platform.ultimaker.com/curastats/", data = urllib.urlencode(data), timeout = 5);
f.read()
f.close()
except:
pass
def _watchProcess(self, commandList, oldThread):
if oldThread is not None:
if self._process is not None:
self._process.terminate()
oldThread.join()
self._id += 1
self._callback(-1.0, False)
try:
self._process = self._runSliceProcess(commandList)
except OSError:
traceback.print_exc()
return
if self._thread != threading.currentThread():
self._process.terminate()
self._callback(0.0, False)
self._sliceLog = []
self._printTimeSeconds = None
self._filamentMM = [0.0, 0.0]
line = self._process.stdout.readline()
objectNr = 0
while len(line):
line = line.strip()
if line.startswith('Progress:'):
line = line.split(':')
if line[1] == 'process':
objectNr += 1
elif line[1] in self._progressSteps:
progressValue = float(line[2]) / float(line[3])
progressValue /= len(self._progressSteps)
progressValue += 1.0 / len(
self._progressSteps) * self._progressSteps.index(
line[1])
progressValue /= self._objCount
progressValue += 1.0 / self._objCount * objectNr
try:
self._callback(progressValue, False)
except:
pass
elif line.startswith('Print time:'):
self._printTimeSeconds = int(line.split(':')[1].strip())
elif line.startswith('Filament:'):
self._filamentMM[0] = int(line.split(':')[1].strip())
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
radius = profile.getProfileSettingFloat(
'filament_diameter') / 2.0
self._filamentMM[0] /= (math.pi * radius * radius)
elif line.startswith('Filament2:'):
self._filamentMM[1] = int(line.split(':')[1].strip())
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
radius = profile.getProfileSettingFloat(
'filament_diameter') / 2.0
self._filamentMM[1] /= (math.pi * radius * radius)
else:
self._sliceLog.append(line.strip())
line = self._process.stdout.readline()
for line in self._process.stderr:
self._sliceLog.append(line.strip())
returnCode = self._process.wait()
try:
if returnCode == 0:
pluginError = profile.runPostProcessingPlugins(
self._exportFilename)
if pluginError is not None:
print pluginError
self._sliceLog.append(pluginError)
self._callback(1.0, True)
else:
for line in self._sliceLog:
print line
self._callback(-1.0, False)
except:
pass
self._process = None
def main():
parser = OptionParser(usage="usage: %prog [options] <X,Y> <filename>[, <X,Y> <filename>][, ...]")
parser.add_option(
"-p", "--profile", action="store", type="string", dest="profile", help="Encoded profile to use for the print"
)
parser.add_option("-o", "--output", action="store", type="string", dest="output", help="Output filename")
(options, args) = parser.parse_args()
if options.output is None:
print "Missing output filename"
sys.exit(1)
if options.profile is not None:
profile.loadGlobalProfileFromString(options.profile)
options.output = fixUTF8(options.output)
clearZ = 0
resultFile = open(options.output, "w")
for idx in xrange(0, len(args), 2):
position = map(float, args[idx].split(","))
if len(position) < 9 + 2:
position = position[0:2]
position += [1, 0, 0]
position += [0, 1, 0]
position += [0, 0, 1]
filenames = fixUTF8(args[idx + 1]).split("|")
profile.setTempOverride("object_center_x", position[0])
profile.setTempOverride("object_center_y", position[1])
if idx == 0:
resultFile.write(";TYPE:CUSTOM\n")
resultFile.write(
profile.getAlterationFileContents("start.gcode").replace(
"?filename?", " ".join(filenames).encode("ascii", "replace")
)
)
else:
resultFile.write(";TYPE:CUSTOM\n")
n = output[-1].rfind("Z") + 1
zString = output[-1][n : n + 20]
zString = zString[0 : zString.find(" ")]
clearZ = max(clearZ, float(zString) + 10)
profile.setTempOverride("clear_z", clearZ)
print position
print profile.getAlterationFileContents("nextobject.gcode")
resultFile.write(
profile.getAlterationFileContents("nextobject.gcode").replace(
"?filename?", " ".join(filenames).encode("ascii", "replace")
)
)
output = []
for filename in filenames:
extruderNr = filenames.index(filename)
profile.resetTempOverride()
if extruderNr > 0:
profile.setTempOverride(
"object_center_x", position[0] - profile.getPreferenceFloat("extruder_offset_x%d" % (extruderNr))
)
profile.setTempOverride(
"object_center_y", position[1] - profile.getPreferenceFloat("extruder_offset_y%d" % (extruderNr))
)
profile.setTempOverride("fan_enabled", "False")
profile.setTempOverride("skirt_line_count", "0")
profile.setTempOverride("alternative_center", filenames[0])
else:
profile.setTempOverride("object_center_x", position[0])
profile.setTempOverride("object_center_y", position[1])
profile.setTempOverride("object_matrix", ",".join(map(str, position[2:11])))
output.append(export.getOutput(filename))
profile.resetTempOverride()
if len(output) == 1:
resultFile.write(output[0])
else:
stitchMultiExtruder(output, resultFile)
resultFile.write(";TYPE:CUSTOM\n")
resultFile.write(profile.getAlterationFileContents("end.gcode"))
resultFile.close()
print "Running plugins"
ret = profile.runPostProcessingPlugins(options.output)
if ret is not None:
print ret
print "Finalizing %s" % (os.path.basename(options.output))
if profile.getPreference("submit_slice_information") == "True":
filenames = fixUTF8(args[idx + 1]).split("|")
for filename in filenames:
m = hashlib.sha512()
f = open(filename, "rb")
while True:
chunk = f.read(1024)
if not chunk:
break
m.update(chunk)
f.close()
data = {
"processor": platform.processor(),
"machine": platform.machine(),
"platform": platform.platform(),
"profile": profile.getGlobalProfileString(),
"preferences": profile.getGlobalPreferencesString(),
"modelhash": m.hexdigest(),
"version": version.getVersion(),
}
try:
f = urllib2.urlopen("http://platform.ultimaker.com/curastats/", data=urllib.urlencode(data), timeout=5)
f.read()
f.close()
except:
pass
