def getCommands(self, group):
cmdlist = []
cmdsubs = {}
for cmd in self.commands[group]:
command, subgroup = cmd
if subgroup != None and GroupButtonMode > 0:
if not(subgroup in cmdsubs):
cmdsubs[subgroup] = []
if GroupButtonMode == 2:
cmdlist.append(subgroup.replace(" ", ""))
cmdlist.append("Separator")
cmdsubs[subgroup].append(command)
else:
cmdlist.append(command)
for subcommand in cmdsubs:
if GroupButtonMode == 2:
Gui.addCommand(subcommand.replace(" ", ""), FSGroupCommand(cmdsubs[subcommand], subcommand, subcommand))
else:
cmdlist.append((subcommand.replace(" ", ""), cmdsubs[subcommand]))
return cmdlist
new_part = freecad_document.addObject("Part::Feature", "test")
transform_shape(part, new_part, freecad_document)
bound_box = new_part.Shape.BoundBox
shift_vector = FreeCAD.Vector(-bound_box.XMin + x_pos,
-bound_box.YMin + y_pos,
z_fix - bound_box.ZMin)
x_pos += bound_box.XLength + margin
new_part.Placement.Base = new_part.Placement.Base.add(shift_vector)
bound_box = new_part.Shape.BoundBox
freecad_document.recompute()
if (bound_box.YLength + y_pos) > max_line_y:
max_line_y = bound_box.YLength + y_pos
if (i + 1) % per_line == 0:
y_pos = max_line_y + margin
x_pos = 0
new_parts_list.append(new_part)
for tmppart in new_parts_list:
Draft.makeShape2DView(tmppart)
freecad_document.recompute()
return new_parts_list
Gui.addCommand('export_command', ExportCommand())
return {
'Pixmap':
icon, # the name of a svg file available in the resources
'MenuText': "Add Press-Nut",
'ToolTip': "Add PEM Self Clinching Metric Nut"
}
def Activated(self):
FastenerBase.FSGenerateObjects(FSPressNutObject, "PressNut")
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSPressNut", FSPressnutCommand())
FastenerBase.FSCommands.append("FSPressNut", "screws", "PEM Inserts")
###################################################################################
# PEM Self Clinching standoffs types: SO/SOS/SOA/SO4
SOLengths = {
'3': 0,
'4': 0,
'6': 0,
'8': 0,
'10': 4,
'12': 4,
'14': 4,
'16': 8,
'18': 8,
'20': 8,
activeBody = view.getActiveObject('pdbody')
if not smIsOperationLegal(activeBody, selobj):
return
doc.openTransaction("Add Bend")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython","SolidBend")
SMSolidBend(a)
SMBendViewProviderTree(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython","SolidBend")
SMSolidBend(a)
SMBendViewProviderFlat(a.ViewObject)
activeBody.addObject(a)
FreeCADGui.Selection.clearSelection()
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 1 or len(Gui.Selection.getSelectionEx()[0].SubElementNames) < 1:
return False
# selobj = Gui.Selection.getSelection()[0]
for selFace in Gui.Selection.getSelectionEx()[0].SubObjects:
if type(selFace) != Part.Edge :
return False
return True
Gui.addCommand('SMMakeBend',AddBendCommandClass())
def Activated(self):
doc = FreeCAD.ActiveDocument
modifiers = QtGui.QApplication.keyboardModifiers()
pg = FreeCAD.ParamGet("User parameter:Plugins/MeshRemodel")
prec = pg.GetInt("SketchRadiusPrecision", 1)
if modifiers == QtCore.Qt.NoModifier:
if not "Sketcher_NewSketch" in Gui.listCommands():
Gui.activateWorkbench("SketcherWorkbench")
Gui.activateWorkbench("MeshRemodelWorkbench")
Gui.runCommand("Sketcher_NewSketch")
return
doc.openTransaction("Create sketch")
if modifiers == QtCore.Qt.AltModifier:
#alternative method: on alt+click make separate sketch from each object, then merge them together
sketches = []
for obj in self.objs:
sketches.append(
Draft.makeSketch(obj,
autoconstraints=True,
radiusPrecision=prec))
doc.recompute()
FreeCADGui.Selection.clearSelection()
for sk in sketches:
if sk:
FreeCADGui.Selection.addSelection(sk)
if len(sketches) >= 2:
if not "Sketcher_NewSketch" in Gui.listCommands():
Gui.activateWorkbench("SketcherWorkbench")
Gui.activateWorkbench("MeshRemodelWorkbench")
FreeCADGui.runCommand("Sketcher_MergeSketches")
sketch = doc.ActiveObject
doc.recompute()
for sk in sketches:
if sk:
doc.removeObject(sk.Name)
elif modifiers == QtCore.Qt.ControlModifier:
#on ctrl+click make single sketch out of selected objects
sketch = Draft.makeSketch(self.objs,
autoconstraints=True,
radiusPrecision=prec)
doc.recompute()
for o in self.objs:
if hasattr(o, "ViewObject"):
o.ViewObject.Visibility = False
doc.recompute()
doc.commitTransaction()
return
shape = origshape
for diam in fp.diameters:
FreeCAD.Console.PrintLog("Generating hole tool for: " + diam + "\n")
edge, m, f, o, type = cshSplitEdgeDiam(diam)
cshole = cshMakeCSHole(m, type)
FastenerBase.FSMoveToObject(cshole, origshape.getElement(edge), f == '1', float(o))
shape = shape.cut(cshole)
fp.Shape = shape
class FSFilletCommand:
"""Make holes for countersunk screws"""
def GetResources(self):
icon = os.path.join( iconPath , 'IconCSHole.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Make countersunk" ,
'ToolTip' : "Chamfer holes for countersunk screws"}
def Activated(self):
Gui.Control.showDialog(FSTaskFilletDialog(None))
return
def IsActive(self):
return len(Gui.Selection.getSelectionEx()) == 1
Gui.addCommand("FSFillet", FSFilletCommand())
FastenerBase.FSCommands.append("FSFillet", "command")
# to monitor selections: add SelObserver http://www.freecadweb.org/wiki/index.php?title=Code_snippets#Function_resident_with_the_mouse_click_action
# to filter selections: use Gui.Selection.SelectionGate
def IsActive(self):
selObjs = self.GetSelection()
return len(selObjs) > 0
def GetSelection(self):
screwObj = []
for selobj in Gui.Selection.getSelectionEx():
obj = selobj.Object
#FreeCAD.Console.PrintLog("sel obj: " + str(obj) + "\n")
if (hasattr(obj, 'Proxy') and isinstance(obj.Proxy, FSBaseObject)):
if obj.baseObject != None:
screwObj.append(obj)
return screwObj
Gui.addCommand('FSFlip',FSFlipCommand())
FSCommands.append('FSFlip', "command")
class FSMoveCommand:
"""Move Screw command"""
def GetResources(self):
icon = os.path.join( iconPath , 'IconMove.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Move fastner" ,
'ToolTip' : "Move fastner to a new location"}
def Activated(self):
selObj = self.GetSelection()
if selObj[0] == None:
return
"............. ",
"............. ",
" .... ",
" .. ",
" . . ",
" . . ",
" . . ",
" ",
" "};
"""
def Initialize(self):
import ExportPanel
from panel import multiplejoins
cmd_list = ["multiple_tabs_command", "export_command"] # A list of command names created in the line above
self.appendToolbar("Laser Cut Commands", cmd_list) # creates a new toolbar with your commands
def Activated(self):
return
def Deactivated(self):
return
def ContextMenu(self, recipient):
self.appendContextMenu("My commands", self.list)
def GetClassName(self):
return "Gui::PythonWorkbench"
Gui.addWorkbench(LCInterlockingWorkbench())
activeBody = view.getActiveObject('pdbody')
if not smIsOperationLegal(activeBody, selobj):
return
doc.openTransaction("Add Junction")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython","Junction")
SMJunction(a)
SMJViewProviderTree(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython","Junction")
SMJunction(a)
SMJViewProviderFlat(a.ViewObject)
activeBody.addObject(a)
FreeCADGui.Selection.clearSelection()
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 1 or len(Gui.Selection.getSelectionEx()[0].SubElementNames) < 1:
return False
# selobj = Gui.Selection.getSelection()[0]
for selEdge in Gui.Selection.getSelectionEx()[0].SubObjects:
if type(selEdge) != Part.Edge :
return False
return True
Gui.addCommand('SMMakeJunction',AddJunctionCommandClass())
new_parts_list = []
per_line = int(math.sqrt(len(parts_list)))
for i in range(len(parts_list)):
part = parts_list[i]
new_part = freecad_document.addObject("Part::Feature", "test")
transform_shape(part, new_part, freecad_document)
bound_box = new_part.Shape.BoundBox
shift_vector = FreeCAD.Vector(-bound_box.XMin + x_pos, -bound_box.YMin + y_pos, z_fix - bound_box.ZMin)
x_pos += bound_box.XLength + margin
new_part.Placement.Base = new_part.Placement.Base.add(shift_vector)
bound_box = new_part.Shape.BoundBox
freecad_document.recompute()
if (bound_box.YLength + y_pos) > max_line_y:
max_line_y = bound_box.YLength + y_pos
if (i+1) % per_line == 0:
y_pos = max_line_y + margin
x_pos = 0
new_parts_list.append(new_part)
Draft.makeShape2DView(new_part)
freecad_document.recompute()
return new_parts_list
Gui.addCommand('export_command', ExportCommand())
self.top_box_param.get_properties()
self.obj_box.need_recompute = True
class MakeRoundedBoxCommand:
def __init__(self):
return
def GetResources(self):
return {
'Pixmap': os.path.join(
iconPath, 'roundbox.xpm'
), # the name of a svg file available in the resources
'MenuText': "Rounded box",
'ToolTip': "Make rounded box without tab"
}
def IsActive(self):
return FreeCAD.ActiveDocument is not None
def Activated(self):
groupRoundedBox = FreeCAD.ActiveDocument.addObject(
"Part::FeaturePython", "RoundedBox")
GroupRoundedBox(groupRoundedBox)
vp = ViewProviderGroupRoundedBox(groupRoundedBox.ViewObject)
vp.setEdit(ViewProviderGroupRoundedBox)
return
Gui.addCommand('make_rounded_box_command', MakeRoundedBoxCommand())
'Pixmap':
icon, # the name of a svg file available in the resources
'MenuText': "Add threaded rod for tapping holes",
'ToolTip': "Add arbitrary length threaded rod for tapping holes"
}
def Activated(self):
for selObj in FastenerBase.FSGetAttachableSelections():
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"ScrewTap")
FSScrewRodObject(a, selObj)
a.Label = a.Proxy.itemText
FSViewProviderTree(a.ViewObject)
FreeCAD.ActiveDocument.recompute()
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSScrewTap", FSScrewRodCommand())
FastenerBase.FSCommands.append("FSScrewTap", "screws", "misc")
## add fastener types
FastenerBase.FSAddFastenerType("Screw")
FastenerBase.FSAddFastenerType("Washer", False)
FastenerBase.FSAddFastenerType("Nut", False)
FastenerBase.FSAddFastenerType("ScrewTap", True, False)
for item in ScrewMaker.screwTables:
FastenerBase.FSAddItemsToType(ScrewMaker.screwTables[item][0], item)
from FreeCAD import Base
from FreeCAD import Gui
import ArachNURBS as AN
# Locate Workbench Directory
import os, Silk_dummy
path_Silk = os.path.dirname(Silk_dummy.__file__)
path_Silk_icons = os.path.join(path_Silk, 'Resources', 'Icons')
class StarTrim_CubicNStar():
def Activated(self):
CubicNStar = Gui.Selection.getSelection()[0]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"StarTrim_CubicNStar")
AN.StarTrim_CubicNStar(a, CubicNStar)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.DisplayMode = u"Shaded"
a.ViewObject.ShapeColor = (0.33, 0.67, 1.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap': path_Silk_icons + '/StarTrim_CubicNStar.svg',
'MenuText': 'StarTrim_CubicNStar',
'ToolTip': 'StarTrim_CubicNStar'
}
Gui.addCommand('StarTrim_CubicNStar', StarTrim_CubicNStar())
cshole = cshMakeCSHole(m, type)
FastenerBase.FSMoveToObject(cshole, origshape.getElement(edge),
f == '1', float(o))
shape = shape.cut(cshole)
fp.Shape = shape
class FSFilletCommand:
"""Make holes for countersunk screws"""
def GetResources(self):
icon = os.path.join(iconPath, 'IconCSHole.svg')
return {
'Pixmap':
icon, # the name of a svg file available in the resources
'MenuText': "Make countersunk",
'ToolTip': "Chamfer holes for countersunk screws"
}
def Activated(self):
Gui.Control.showDialog(FSTaskFilletDialog(None))
return
def IsActive(self):
return len(Gui.Selection.getSelectionEx()) == 1
Gui.addCommand("FSFillet", FSFilletCommand())
FastenerBase.FSCommands.append("FSFillet", "command")
# to monitor selections: add SelObserver http://www.freecadweb.org/wiki/index.php?title=Code_snippets#Function_resident_with_the_mouse_click_action
# to filter selections: use Gui.Selection.SelectionGate
if hasattr(view, 'getActiveObject'):
activeBody = view.getActiveObject('pdbody')
if not smIsOperationLegal(activeBody, selobj):
return
doc.openTransaction("SketchOnSheet")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython", "SketchOnSheet")
SMSketchOnSheet(a)
SMSketchOnSheetVP(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython", "SketchOnSheet")
SMSketchOnSheet(a)
SMSketchOnSheetPDVP(a.ViewObject)
activeBody.addObject(a)
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 2:
return False
# selobj = Gui.Selection.getSelection()[1]
# if str(type(selobj)) != "<type 'Sketcher.SketchObject'>" :
# return False
return True
Gui.addCommand('SMSketchOnSheet', AddSketchOnSheetCommandClass())
def IsActive(self):
selObjs = self.GetSelection()
return len(selObjs) > 0
def GetSelection(self):
screwObj = []
for selobj in Gui.Selection.getSelectionEx():
obj = selobj.Object
#FreeCAD.Console.PrintLog("sel obj: " + str(obj) + "\n")
if (hasattr(obj, 'Proxy') and isinstance(obj.Proxy, FSBaseObject)):
if obj.baseObject != None:
screwObj.append(obj)
return screwObj
Gui.addCommand('FSFlip', FSFlipCommand())
FSCommands.append('FSFlip', "command")
class FSMoveCommand:
"""Move Screw command"""
def GetResources(self):
icon = os.path.join(iconPath, 'IconMove.svg')
return {
'Pixmap':
icon, # the name of a svg file available in the resources
'MenuText': "Move fastner",
'ToolTip': "Move fastner to a new location"
}
def Activated(self):
class ControlGrid5Star66_5Sub():
def Activated(self):
sel = Gui.Selection.getSelection()
Sub_0 = Gui.Selection.getSelection()[0]
Sub_1 = Gui.Selection.getSelection()[1]
Sub_2 = Gui.Selection.getSelection()[2]
Sub_3 = Gui.Selection.getSelection()[3]
Sub_4 = Gui.Selection.getSelection()[4]
SubList = [Sub_0, Sub_1, Sub_2, Sub_3, Sub_4]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"ControlGrid5Star66_5Sub")
AN.ControlGrid5Star66_5Sub(a, SubList)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (1.00, 0.67, 0.00)
a.ViewObject.PointSize = 2.00
a.ViewObject.PointColor = (1.00, 1.00, 0.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap': path_Silk_icons + '/ControlGrid5Star66_5Sub.svg',
'MenuText': 'ControlGrid5Star66_5Sub',
'ToolTip': 'ControlGrid5Star66_5Sub'
}
Gui.addCommand('ControlGrid5Star66_5Sub', ControlGrid5Star66_5Sub())
def activated(self):
#FreeCAD.Console.PrintMessage("activate\n")
self.obj=None
self.view=Gui.activeDocument().activeView()
self.call = self.view.addEventCallback("SoEvent",self.observe)
FreeCADGui.seToolbar.show(self.mode)
class SubGrid33_2Grid64():
def Activated(self):
sel = Gui.Selection.getSelection()
Grid_a = Gui.Selection.getSelection()[0]
Grid_b = Gui.Selection.getSelection()[1]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"SubGrid33_2Grid64")
AN.SubGrid33_2Grid64(a, Grid_a, Grid_b)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (0.67, 1.00, 1.00)
a.ViewObject.PointSize = 4.00
a.ViewObject.PointColor = (0.00, 0.33, 1.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap':
path_Silk_icons + '/SubGrid33_2Grid64.svg',
'MenuText':
'SubGrid33_2Grid64',
'ToolTip':
'SubGrid33_2Grid64: \n Select two ControlGrid_64 objects meeting at a corner \n to generate a corner blend partial grid. \n this is intended for the case where the two ControlGrid_64 objects \n are blends grids which have segments of one common surface as inputs'
}
Gui.addCommand('SubGrid33_2Grid64', SubGrid33_2Grid64())
"""Add Screw Rod command"""
def GetResources(self):
icon = os.path.join( iconPath , 'ScrewTap.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Add Threaded Rod" ,
'ToolTip' : "Add arbitrary length threaded rod"}
def Activated(self):
for selObj in FastenerBase.FSGetAttachableSelections():
a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","ScrewTap")
FSScrewRodObject(a, selObj)
a.Label = a.Proxy.itemText
FSViewProviderTree(a.ViewObject)
FreeCAD.ActiveDocument.recompute()
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSScrewTap",FSScrewRodCommand())
FastenerBase.FSCommands.append("FSScrewTap", "screws", "misc")
## add fastener types
FastenerBase.FSAddFastenerType("Screw")
FastenerBase.FSAddFastenerType("Washer", False)
FastenerBase.FSAddFastenerType("Nut", False)
FastenerBase.FSAddFastenerType("ScrewTap", True, False)
for item in ScrewMaker.screwTables:
FastenerBase.FSAddItemsToType(ScrewMaker.screwTables[item][0], item)
activeBody = None
selobj = Gui.Selection.getSelectionEx()[0].Object
if hasattr(view,'getActiveObject'):
activeBody = view.getActiveObject('pdbody')
if not smIsOperationLegal(activeBody, selobj):
return
doc.openTransaction("Bend")
if activeBody == None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython","Fold")
SMFoldWall(a)
SMFoldViewProvider(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython","Fold")
SMFoldWall(a)
SMFoldPDViewProvider(a.ViewObject)
activeBody.addObject(a)
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 2 :
return False
# selobj = Gui.Selection.getSelection()[1]
# if str(type(selobj)) != "<type 'Sketcher.SketchObject'>" :
# return False
return True
Gui.addCommand('SMFoldWall',AddFoldWallCommandClass())
def activated(self):
#FreeCAD.Console.PrintMessage("activate\n")
self.obj = None
self.view = Gui.activeDocument().activeView()
self.call = self.view.addEventCallback("SoEvent", self.observe)
FreeCADGui.seToolbar.show(self.mode)
def Activated(self):
for selObj in FastenerBase.FSGetAttachableSelections():
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"ScrewTap")
FSScrewRodObject(a, selObj)
a.Label = a.Proxy.itemText
FSViewProviderTree(a.ViewObject)
FreeCAD.ActiveDocument.recompute()
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSScrewTap", FSScrewRodCommand())
FastenerBase.FSCommands.append("FSScrewTap", "screws", "misc")
class FSScrewDieObject(FSBaseObject):
def __init__(self, obj, attachTo):
'''"Add screw die" '''
FSBaseObject.__init__(self, obj, attachTo)
self.itemText = "ScrewDie"
self.type = 'ScrewDie'
diameters = screwMaker.GetAllDiams(self.type)
diameters.insert(0, 'Auto')
#self.Proxy = obj.Name
obj.addProperty("App::PropertyEnumeration", "diameter", "Parameters",
"Screw diameter standard").diameter = diameters
return
doc.openTransaction("Add Relief")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython", "Relief")
SMRelief(a)
SMReliefViewProviderTree(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython", "Relief")
SMRelief(a)
SMReliefViewProviderFlat(a.ViewObject)
activeBody.addObject(a)
FreeCADGui.Selection.clearSelection()
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 1 or len(
Gui.Selection.getSelectionEx()[0].SubElementNames) < 1:
return False
# selobj = Gui.Selection.getSelection()[0]
for selVertex in Gui.Selection.getSelectionEx()[0].SubObjects:
if type(selVertex) != Part.Vertex:
return False
return True
Gui.addCommand('SMMakeRelief', AddReliefCommandClass())
def FSAddScrewCommand(type, help, dropGroup=None):
cmd = 'FS' + type
Gui.addCommand(cmd, FSScrewCommand(type, help))
FastenerBase.FSCommands.append(cmd, "screws", dropGroup)
AN.ControlPoly6_2N(a, sketch0, sketch1)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (0.00, 1.00, 1.00)
a.ViewObject.PointSize = 4.00
a.ViewObject.PointColor = (0.00, 0.00, 1.00)
FreeCAD.ActiveDocument.recompute()
if mode == 'FilletBezier':
CubicCurve4_0 = Gui.Selection.getSelection()[0]
CubicCurve4_1 = Gui.Selection.getSelection()[1]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"ControlPoly6_FilletBezier")
AN.ControlPoly6_FilletBezier(a, CubicCurve4_0, CubicCurve4_1)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (0.00, 1.00, 1.00)
a.ViewObject.PointSize = 4.00
a.ViewObject.PointColor = (0.00, 0.00, 1.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap': path_Silk_icons + '/ControlPoly6.svg',
'MenuText': 'ControlPoly6',
'ToolTip': 'ControlPoly6'
}
Gui.addCommand('ControlPoly6', ControlPoly6())
return
doc.openTransaction("Bend")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython","Bend")
SMBendWall(a)
SMViewProviderTree(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython","Bend")
SMBendWall(a)
SMViewProviderFlat(a.ViewObject)
activeBody.addObject(a)
FreeCADGui.Selection.clearSelection()
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 1 or len(Gui.Selection.getSelectionEx()[0].SubElementNames) < 1:
return False
selobj = Gui.Selection.getSelection()[0]
if selobj.isDerivedFrom("Sketcher::SketchObject"):
return False
for selFace in Gui.Selection.getSelectionEx()[0].SubObjects:
if type(selFace) == Part.Vertex :
return False
return True
Gui.addCommand('SMMakeWall',AddWallCommandClass())
a.ViewObject.LineColor = (0.00, 1.00, 1.00)
a.ViewObject.PointSize = 4.00
a.ViewObject.PointColor = (0.00, 0.00, 1.00)
FreeCAD.ActiveDocument.recompute()
if mode == '2N':
sketch0 = Gui.Selection.getSelection()[0]
sketch1 = Gui.Selection.getSelection()[1]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"ControlPoly4_2N")
AN.ControlPoly4_2N(a, sketch0, sketch1)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (0.00, 1.00, 1.00)
a.ViewObject.PointSize = 4.00
a.ViewObject.PointColor = (0.00, 0.00, 1.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap':
path_Silk_icons + '/ControlPoly4.svg',
'MenuText':
'ControlPoly4',
'ToolTip':
'ControlPoly4: \n Creates a 4 point control polygon from a variety of inputs. \n -a sketch of three lines connected end to end \n -two sketches containing a circle and a line each \n -if a single sketch is selected that does not contain \n three elements, the first element is converted \n (this works for line, arc of circle, and arc of ellipse elements)'
}
Gui.addCommand('ControlPoly4', ControlPoly4())
if not smIsOperationLegal(activeBody, selobj):
return
doc.openTransaction("Corner Relief")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython", "CornerRelief")
SMCornerRelief(a)
SMCornerReliefVP(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython", "CornerRelief")
SMCornerRelief(a)
SMCornerReliefPDVP(a.ViewObject)
activeBody.addObject(a)
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 1 or len(
Gui.Selection.getSelectionEx()[0].SubElementNames) < 2:
return False
# selobj = Gui.Selection.getSelection()[0]
for selVertex in Gui.Selection.getSelectionEx()[0].SubObjects:
if type(selVertex) != Part.Edge:
return False
return True
Gui.addCommand('SMCornerRelief', AddCornerReliefCommandClass())
# Locate Workbench Directory
import os, Silk_dummy
path_Silk = os.path.dirname(Silk_dummy.__file__)
path_Silk_icons = os.path.join(path_Silk, 'Resources', 'Icons')
class ControlGrid44_EdgeSegment():
def Activated(self):
surface = Gui.Selection.getSelection()[0]
curve = Gui.Selection.getSelection()[1]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"ControlGrid44_EdgeSegment")
AN.ControlGrid44_EdgeSegment(a, surface, curve)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (0.67, 1.00, 1.00)
a.ViewObject.PointSize = 4.00
a.ViewObject.PointColor = (0.00, 0.33, 1.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap': path_Silk_icons + '/ControlGrid44_EdgeSegment.svg',
'MenuText': 'ControlGrid44_EdgeSegment',
'ToolTip': 'ControlGrid44_EdgeSegment'
}
Gui.addCommand('ControlGrid44_EdgeSegment', ControlGrid44_EdgeSegment())
"""Add Preass-nut command"""
def GetResources(self):
icon = os.path.join( iconPath , 'PEMPressNut.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Add Press-Nut" ,
'ToolTip' : "Add PEM Self Clinching Metric Nut"}
def Activated(self):
FastenerBase.FSGenerateObjects(FSPressNutObject, "PressNut")
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSPressNut", FSPressnutCommand())
FastenerBase.FSCommands.append("FSPressNut", "screws", "PEM Inserts")
###################################################################################
# PEM Self Clinching standoffs types: SO/SOS/SOA/SO4
SOLengths = {'3':0, '4':0, '6':0, '8':0, '10':4, '12':4, '14':4, '16':8, '18':8, '20':8, '22':11, '25':11}
#BSLengths = {'6':3.2, '8':4, '10':4, '12':5, '14':6.5, '16':6.5, '18':9.5, '20':9.5, '22':9.5, '25':9.5}
SODiameters = ['Auto', 'M3', '3.5M3', 'M3.5', 'M4', 'M5' ]
SOPEMTable = {
# B, C, H, d, Lmin, Lmax
'M3': (3.2, 4.2, 4.8, 2.5, 3, 18),
'3.5M3':(3.2, 5.39, 6.4, 2.5, 3, 25),
'M3.5': (3.9, 5.39, 6.4, 2.9, 3, 25),
'M4': (4.8, 7.12, 7.9, 3.3, 3, 25),
'M5': (5.36, 7.12, 7.9, 4.2, 3, 25)
a=FreeCAD.ActiveDocument.addObject("Part::FeaturePython","Bend")
SMBendWall(a)
SMViewProviderTree(a.ViewObject)
FreeCAD.ActiveDocument.recompute()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 1 or len(Gui.Selection.getSelectionEx()[0].SubElementNames) < 1:
return False
selobj = Gui.Selection.getSelection()[0]
for selFace in Gui.Selection.getSelectionEx()[0].SubObjects:
if type(selFace) != Part.Face:
return False
return True
Gui.addCommand('SMMakeWall',AddWallCommandClass())
###########################################################################################
# Extrude
###########################################################################################
def smExtrude(extLength = 10.0, selFaceNames = '', selObjectName = ''):
# selFace = Gui.Selection.getSelectionEx()[0].SubObjects[0]
# selObjectName = Gui.Selection.getSelection()[0].Name
AAD = FreeCAD.ActiveDocument
MainObject = AAD.getObject( selObjectName )
finalShape = MainObject.Shape
for selFaceName in selFaceNames:
selFace = AAD.getObject(selObjectName).Shape.getElement(selFaceName)
'MenuText': "Change fastener parameters" ,
'ToolTip' : "Change parameters of selected fasteners"}
def Activated(self):
dlg = FSTaskChangeParamDialog(None)
fstype = FastenerBase.FSFasenerTypeDB[self.type]
dlg.FillFields(fstype)
Gui.Control.showDialog(dlg)
return
def IsActive(self):
sel = Gui.Selection.getSelection()
if len(sel) == 0:
return False
self.type = None
tmaxlen = 0
for typename in FastenerBase.FSFasenerTypeDB:
#FreeCAD.Console.PrintLog(typename + "\n")
if filter(lambda c: not c.isdigit(), sel[0].Name) == typename:
self.type = typename
if self.type == None:
return False
for obj in sel:
if filter(lambda c: not c.isdigit(), obj.Name) != self.type:
return False
return True
Gui.addCommand("FSChangeParams", FSChangeParamCommand())
FastenerBase.FSCommands.append("FSChangeParams", "command")
from FreeCAD import Base
from FreeCAD import Gui
import ArachNURBS as AN
# Locate Workbench Directory
import os, Silk_dummy
path_Silk = os.path.dirname(Silk_dummy.__file__)
path_Silk_icons = os.path.join(path_Silk, 'Resources', 'Icons')
class CubicNStarSurface_NStar66():
def Activated(self):
NStar66 = Gui.Selection.getSelection()[0]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"CubicNStarSurface_NStar66")
AN.CubicNStarSurface_NStar66(a, NStar66)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.DisplayMode = u"Shaded"
a.ViewObject.ShapeColor = (0.33, 0.67, 1.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap': path_Silk_icons + '/CubicNStarSurface_NStar66.svg',
'MenuText': 'CubicNStarSurface_NStar66',
'ToolTip': 'CubicNStarSurface_NStar66'
}
Gui.addCommand('CubicNStarSurface_NStar66', CubicNStarSurface_NStar66())
if hasattr(view, 'getActiveObject'):
activeBody = view.getActiveObject('pdbody')
# if not smIsOperationLegal(activeBody, selobj):
# return
doc.openTransaction("BaseBend")
if activeBody is None or not smIsSketchObject(selobj):
a = doc.addObject("Part::FeaturePython", "BaseBend")
SMBaseBend(a)
SMBaseViewProvider(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython", "BaseBend")
SMBaseBend(a)
SMBaseViewProvider(a.ViewObject)
activeBody.addObject(a)
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) != 1:
return False
selobj = Gui.Selection.getSelection()[0]
if not (selobj.isDerivedFrom("Sketcher::SketchObject")):
return False
return True
Gui.addCommand('SMBase', AddBaseCommandClass())
"""Add Preass-nut command"""
def GetResources(self):
icon = os.path.join( iconPath , 'PEMPressNut.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Add Press-Nut" ,
'ToolTip' : "Add PEM Self Clinching Metric Nut"}
def Activated(self):
FastenerBase.FSGenerateObjects(FSPressNutObject, "PressNut")
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSPressNut", FSPressnutCommand())
FastenerBase.FSCommands.append("FSPressNut", "screws", "PEM Inserts")
###################################################################################
# PEM Self Clinching standoffs types: SO/SOS/SOA/SO4
SOLengths = {'3':0, '4':0, '6':0, '8':0, '10':4, '12':4, '14':4, '16':8, '18':8, '20':8, '22':11, '25':11}
#BSLengths = {'6':3.2, '8':4, '10':4, '12':5, '14':6.5, '16':6.5, '18':9.5, '20':9.5, '22':9.5, '25':9.5}
SODiameters = ['Auto', 'M3', '3.5M3', 'M3.5', 'M4', 'M5' ]
SOPEMTable = {
# B, C, H, d, Lmin, Lmax
'M3': (3.2, 4.2, 4.8, 2.5, 3, 18),
'3.5M3':(3.2, 5.39, 6.4, 2.5, 3, 25),
'M3.5': (3.9, 5.39, 6.4, 2.9, 3, 25),
'M4': (4.8, 7.12, 7.9, 3.3, 3, 25),
'M5': (5.36, 7.12, 7.9, 4.2, 3, 25)
activeBody = view.getActiveObject('pdbody')
if not smIsOperationLegal(activeBody, selobj):
return
doc.openTransaction("Bend")
if activeBody is None or not smIsPartDesign(selobj):
a = doc.addObject("Part::FeaturePython","Fold")
SMFoldWall(a)
SMFoldViewProvider(a.ViewObject)
else:
#FreeCAD.Console.PrintLog("found active body: " + activeBody.Name)
a = doc.addObject("PartDesign::FeaturePython","Fold")
SMFoldWall(a)
SMFoldPDViewProvider(a.ViewObject)
activeBody.addObject(a)
doc.recompute()
doc.commitTransaction()
return
def IsActive(self):
if len(Gui.Selection.getSelection()) < 2 :
return False
selFace = Gui.Selection.getSelectionEx()[0].SubObjects[0]
if type(selFace) != Part.Face:
return False
selobj = Gui.Selection.getSelection()[1]
if not(selobj.isDerivedFrom('Sketcher::SketchObject')) :
return False
return True
Gui.addCommand('SMFoldWall',AddFoldWallCommandClass())
("M6", 6),
("M8", 8)
)
FSCScrewTypes = (
("ISO7045.svg", "Metric Screw", ScrewMaker.FSCScrewHoleChart),
("PEMPressNut.svg", "PEM Press-nut", FSCPEMPressNutHoleChart),
("PEMBLStandoff.svg", "PEM Stand-off", FSCPEMStudHoleChart),
("PEMStud.svg", "PEM Stud", FSCPEMStudHoleChart)
)
FSScrewCalcDlg = QtGui.QDockWidget()
FSScrewCalcDlg.ui = Ui_DockWidget()
FSScrewCalcDlg.ui.setupUi(FSScrewCalcDlg)
FSScrewCalcDlg.ui.fillScrewTypes()
Gui.getMainWindow().addDockWidget(QtCore.Qt.RightDockWidgetArea, FSScrewCalcDlg)
FSScrewCalcDlg.setFloating(True)
FSScrewCalcDlg.hide()
class FSScrewCalcCommand:
"""Display a calculator for needed screw holes"""
def GetResources(self):
FreeCAD.Console.PrintLog("Getting resources\n")
icon = os.path.join( iconPath , 'IconScrewCalc.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Screw calculator" ,
'ToolTip' : "Show a screw hole calculator"}
def Activated(self):
import os, Silk_dummy
path_Silk = os.path.dirname(Silk_dummy.__file__)
path_Silk_icons = os.path.join(path_Silk, 'Resources', 'Icons')
class SubGrid63_2Surf64():
def Activated(self):
sel = Gui.Selection.getSelection()
Surf_0 = Gui.Selection.getSelection()[0]
Surf_1 = Gui.Selection.getSelection()[1]
a = FreeCAD.ActiveDocument.addObject("Part::FeaturePython",
"SubGrid63_2Surf64")
AN.SubGrid63_2Surf64(a, Surf_0, Surf_1)
a.ViewObject.Proxy = 0 # just set it to something different from None (this assignment is needed to run an internal notification)
a.ViewObject.LineWidth = 1.00
a.ViewObject.LineColor = (1.00, 0.67, 0.00)
a.ViewObject.PointSize = 2.00
a.ViewObject.PointColor = (1.00, 1.00, 0.00)
FreeCAD.ActiveDocument.recompute()
def GetResources(self):
return {
'Pixmap': path_Silk_icons + '/SubGrid63_2Surf64.svg',
'MenuText': 'SubGrid63_2Surf64',
'ToolTip': 'SubGrid63_2Surf64'
}
Gui.addCommand('SubGrid63_2Surf64', SubGrid63_2Surf64())
def Activated(self):
if not "Sketcher_NewSketch" in Gui.listCommands():
Gui.activateWorkbench("SketcherWorkbench")
Gui.activateWorkbench("MeshRemodelWorkbench")
Gui.runCommand("Sketcher_ValidateSketch")
return
def initialize():
if FreeCAD.GuiUp:
Gui.addCommand("MeshRemodelCreatePointsObject",
MeshRemodelCreatePointsObjectCommandClass())
Gui.addCommand("MeshRemodelCreateCoplanarPointsObject",
MeshRemodelCreateCoplanarPointsObjectCommandClass())
Gui.addCommand("MeshRemodelCreateLine",
MeshRemodelCreateLineCommandClass())
Gui.addCommand("MeshRemodelCreatePolygon",
MeshRemodelCreatePolygonCommandClass())
Gui.addCommand("MeshRemodelCreateBSpline",
MeshRemodelCreateBSplineCommandClass())
Gui.addCommand("MeshRemodelCreateCircle",
MeshRemodelCreateCircleCommandClass())
Gui.addCommand("MeshRemodelCreateArc",
MeshRemodelCreateArcCommandClass())
Gui.addCommand("MeshRemodelCreateWire",
MeshRemodelCreateWireCommandClass())
Gui.addCommand("MeshRemodelCreateSketch",
MeshRemodelCreateSketchCommandClass())
Gui.addCommand("MeshRemodelMergeSketches",
MeshRemodelMergeSketchesCommandClass())
Gui.addCommand("MeshRemodelValidateSketch",
MeshRemodelValidateSketchCommandClass())
Gui.addCommand("MeshRemodelSettings",
MeshRemodelSettingsCommandClass())
def FSAddScrewCommand(type, help, dropGroup = None): cmd = 'FS' + type Gui.addCommand(cmd,FSScrewCommand(type, help)) FastenerBase.FSCommands.append(cmd, "screws", dropGroup)
def Activated(self):
doc = FreeCAD.ActiveDocument
pg = FreeCAD.ParamGet("User parameter:Plugins/MeshRemodel")
line_width = pg.GetFloat("LineWidth", 5.0)
point_size = pg.GetFloat("PointSize", 4.0)
coplanar_tolerance = pg.GetFloat("CoplanarTolerance", .001)
#QtGui.QApplication.setOverrideCursor(QtCore.Qt.WaitCursor)
doc.openTransaction("Create coplanar")
modifiers = QtGui.QApplication.keyboardModifiers()
trio = [self.pts[0], self.pts[1], self.pts[2]]
candidates = []
if self.obj and hasattr(self.obj, "Shape"):
candidates = self.obj.Shape.Vertexes
coplanar = []
for v in candidates:
if modifiers == QtCore.Qt.AltModifier or modifiers == QtCore.Qt.AltModifier.__or__(
QtCore.Qt.ShiftModifier):
poly = Part.makePolygon([trio[0], trio[1], trio[2], v.Point])
if DraftGeomUtils.isPlanar(poly):
planar = True
else:
planar = False
else: #use our own complanar check
if gu.isCoplanar(trio, v.Point, coplanar_tolerance):
planar = True
else:
planar = False
if planar:
coplanar.append(Part.Point(v.Point).toShape())
coplanar.extend([Part.Point(v).toShape() for v in trio])
Part.show(Part.makeCompound(coplanar), "MR_Points_Coplanar")
doc.ActiveObject.ViewObject.PointSize = point_size
mr = doc.ActiveObject
if not "Sketcher_NewSketch" in Gui.listCommands():
Gui.activateWorkbench("SketcherWorkbench")
Gui.activateWorkbench("MeshRemodelWorkbench")
Gui.runCommand("Sketcher_NewSketch")
sketch = doc.ActiveObject
sketch.Label = mr.Name + '_Sketch'
sketch.MapReversed = True
for ii in range(0, len(mr.Shape.Vertexes)):
vname = 'Vertex' + str(ii + 1)
sketch.addExternal(mr.Name, vname)
doc.recompute()
if self.obj and hasattr(self.obj, "ViewObject"):
self.obj.ViewObject.Visibility = False
doc.recompute()
doc.commitTransaction()
if modifiers == QtCore.Qt.ShiftModifier or modifiers == QtCore.Qt.ShiftModifier.__or__(
QtCore.Qt.AltModifier):
doc.openTransaction("explode coplanar points")
import CompoundTools.Explode
input_obj = doc.ActiveObject
comp = CompoundTools.Explode.explodeCompound(input_obj)
input_obj.ViewObject.hide()
for obj in comp[1]:
obj.ViewObject.PointSize = point_size
doc.recompute()
doc.commitTransaction()
#QtGui.QApplication.restoreOverrideCursor()
return
s = nutMakeSolid(d)
self.diameter = fp.diameter
fp.Shape = s
fp.Label = fp.diameter + '-Nut'
else:
FreeCAD.Console.PrintLog("Using cached object\n")
if shape != None:
#fp.Placement = FreeCAD.Placement() # reset placement
FastenerBase.FSMoveToObject(fp, shape, fp.invert, fp.offset.Value)
FastenerBase.FSClassIcons[FSHexNutObject] = 'HexNut.svg'
class FSHexNutCommand:
"""Add Preass-nut command"""
def GetResources(self):
icon = os.path.join( iconPath , 'HexNut.svg')
return {'Pixmap' : icon , # the name of a svg file available in the resources
'MenuText': "Add Hex Nut" ,
'ToolTip' : "Add Metric Hexagon Nut - ISO 4032, Style 3"}
def Activated(self):
FastenerBase.FSGenerateObjects(FSHexNutObject, "Nut")
return
def IsActive(self):
return Gui.ActiveDocument != None
Gui.addCommand("FSHexNut", FSHexNutCommand())
#FastenerBase.FSCommands.append("FSHexNut", "screws", "Nut")
def set_transparency(self):
for obj in self.other_object_list:
freecad_object = obj['obj']
freecad_object.ViewObject.Transparency = 90
def check_is_in_active_view(self):
if self.active_document != FreeCAD.ActiveDocument:
raise ValueError("You have to select original document")
return True
class MultipleCommand:
def __init__(self):
return
def GetResources(self):
return {'Pixmap': os.path.join(iconPath, 'one_tab.xpm'), # the name of a svg file available in the resources
'MenuText': "Slots",
'ToolTip': "Slots"}
def IsActive(self):
return True
def Activated(self):
panel = MultipleJoins()
FreeCADGui.Control.showDialog(panel)
return
Gui.addCommand('multiple_tabs_command', MultipleCommand())