class CadWindowMdi(QtGui.QMainWindow):
#@+others
#@+node:1.20130426141258.3576: *3* __init__
def __init__(self):
super(CadWindowMdi, self).__init__()
self.mdiArea = QtGui.QMdiArea()
self.mdiArea.setHorizontalScrollBarPolicy(QtCore.Qt.ScrollBarAsNeeded)
self.mdiArea.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAsNeeded)
self.setCentralWidget(self.mdiArea)
self.mdiArea.subWindowActivated.connect(self.subWindowActivatedEvent)
self.oldSubWin = None
# self.readSettings() #now works for position and size, support for toolbars is still missing(http://www.opendocs.net/pyqt/pyqt4/html/qsettings.html)
self.setWindowTitle("PythonCAD")
qIcon = self._getIcon('pythoncad')
if qIcon:
self.setWindowIcon(qIcon)
self.setUnifiedTitleAndToolBarOnMac(True)
#pythoncad kernel
self.__application = Application()
self.__cmd_intf = CmdIntf(self)
#self.__cmd_intf.FunctionHandler.commandExecuted+=self.commandExecuted
# create all dock windows
self._createDockWindows()
# create status bar
self._createStatusBar()
self.setUnifiedTitleAndToolBarOnMac(True)
self._registerCommands()
self.updateMenus()
self.lastDirectory = os.getenv('USERPROFILE') or os.getenv('HOME')
self.readSettings(
) #now works for position and size and ismaximized, and finally toolbar position
return
#@+node:1.20130426141258.3577: *3* scene
@property
def scene(self):
if self.mdiArea.activeSubWindow():
return self.mdiArea.activeSubWindow().scene
#@+node:1.20130426141258.3578: *3* view
@property
def view(self):
if self.mdiArea.activeSubWindow():
return self.mdiArea.activeSubWindow().view
#@+node:1.20130426141258.3579: *3* Application
@property
def Application(self):
"""
get the kernel application object
"""
return self.__application
#@+node:1.20130426141258.3580: *3* LayerDock
@property
def LayerDock(self):
"""
get the layer tree dockable window
"""
return self.__layer_dock
#@+node:1.20130426141258.3581: *3* _createStatusBar
# ###############################################STATUSBAR
# ##########################################################
def _createStatusBar(self):
'''
Creates the statusbar object.
'''
self.statusBar().showMessage("Ready")
#------------------------------------------------------------------------------------Create status buttons
#Force Direction
self.forceDirectionStatus = statusButton(
'SForceDir.png',
'Orthogonal Mode [right click will in the future set increment constrain angle]'
)
self.connect(self.forceDirectionStatus, QtCore.SIGNAL('clicked()'),
self.setForceDirection)
self.forceDirectionStatus.setMenu(getPolarMenu())
self.statusBar().addPermanentWidget(self.forceDirectionStatus)
#Snap
self.SnapStatus = statusButton(
'SSnap.png',
'Snap [right click displays snap list]\n for future implementation it should be a checkist'
)
self.connect(self.SnapStatus, QtCore.SIGNAL('clicked()'),
self.setSnapStatus)
self.SnapStatus.setMenu(self.__cmd_intf.Category.getMenu(6))
self.SnapStatus.setChecked(True)
self.statusBar().addPermanentWidget(self.SnapStatus)
#Grid
self.GridStatus = statusButton('SGrid.png',
'Grid Mode [not available yet]')
self.connect(self.GridStatus, QtCore.SIGNAL('clicked()'), self.setGrid)
self.statusBar().addPermanentWidget(self.GridStatus)
#------------------------------------------------------------------------------------Set coordinates label on statusbar (updated by idocumet)
self.coordLabel = QtGui.QLabel("x=0.000\ny=0.000")
self.coordLabel.setAlignment(QtCore.Qt.AlignVCenter)
self.coordLabel.setFrameStyle(QtGui.QFrame.Panel | QtGui.QFrame.Sunken)
self.coordLabel.setMinimumWidth(80)
self.coordLabel.setMaximumHeight(20)
self.coordLabel.setFont(QtGui.QFont("Sans", 6))
self.statusBar().addPermanentWidget(self.coordLabel)
#@+node:1.20130426141258.3582: *3* setForceDirection
def setForceDirection(self):
if self.forceDirectionStatus.isChecked():
self.scene.forceDirectionEnabled = True
self.forceDirectionStatus.setFocus(False)
if self.scene.activeICommand != None and self.scene.fromPoint != None:
self.scene.GuideHandler.show()
else:
self.scene.forceDirectionEnabled = False
self.scene.GuideHandler.hide()
#@+node:1.20130426141258.3583: *3* setSnapStatus
def setSnapStatus(self):
if self.SnapStatus.isChecked():
self.scene.snappingPoint.activeSnap = SNAP_POINT_ARRAY['LIST']
else:
self.scene.snappingPoint.activeSnap = SNAP_POINT_ARRAY['NONE']
#@+node:1.20130426141258.3584: *3* setGrid
def setGrid(self):
pass
#@+node:1.20130426141258.3585: *3* commandExecuted
# ###############################################END STATUSBAR
# ##########################################################
def commandExecuted(self):
self.resetCommand()
#@+node:1.20130426141258.3586: *3* _createDockWindows
def _createDockWindows(self):
'''
Creates all dockable windows for the application
'''
# commandline
command_dock = self.__cmd_intf.commandLine
# if the commandline exists, add it
if not command_dock is None:
self.addDockWidget(QtCore.Qt.BottomDockWidgetArea, command_dock)
return
#@+node:1.20130426141258.3587: *3* closeEvent
def closeEvent(self, event):
"""
manage close event
"""
self.mdiArea.closeAllSubWindows()
if self.activeMdiChild():
event.ignore()
else:
self.writeSettings()
event.accept()
#@+node:1.20130426141258.3588: *3* subWindowActivatedEvent
def subWindowActivatedEvent(self):
"""
Sub windows activation
"""
if self.mdiArea.activeSubWindow():
if (self.mdiArea.activeSubWindow().document !=
self.__application.ActiveDocument):
self.resetCommand()
self.__application.ActiveDocument = self.mdiArea.activeSubWindow(
).document
self.updateMenus()
#@+node:1.20130426141258.3589: *3* resetCommand
def resetCommand(self):
"""
Resect the active command
"""
self.__cmd_intf.resetCommand()
if self.scene != None:
self.scene.cancelCommand()
self.statusBar().showMessage("Ready")
#@+node:1.20130426141258.3590: *3* updateMenus
# ################################# SET if ICON AND MENU are ENABLED
# ##########################################################
def updateMenus(self):
"""
update menu status
"""
hasMdiChild = (self.activeMdiChild() is not None)
#File
self.__cmd_intf.setVisible('import', hasMdiChild)
self.__cmd_intf.setVisible('saveas', hasMdiChild)
self.__cmd_intf.setVisible('close', hasMdiChild)
self.__cmd_intf.setVisible('print', hasMdiChild)
#Edit
self.__cmd_intf.setVisible('undo', hasMdiChild)
self.__cmd_intf.setVisible('redo', hasMdiChild)
self.__cmd_intf.setVisible('copy', hasMdiChild)
self.__cmd_intf.setVisible('move', hasMdiChild)
self.__cmd_intf.setVisible('delete', hasMdiChild)
self.__cmd_intf.setVisible('mirror', hasMdiChild)
self.__cmd_intf.setVisible('rotate', hasMdiChild)
self.__cmd_intf.setVisible('trim', hasMdiChild)
self.__cmd_intf.setVisible('property', hasMdiChild)
#Draw
self.__cmd_intf.setVisible('point', hasMdiChild)
self.__cmd_intf.setVisible('segment', hasMdiChild)
self.__cmd_intf.setVisible('rectangle', hasMdiChild)
self.__cmd_intf.setVisible('polyline', hasMdiChild)
self.__cmd_intf.setVisible('circle', hasMdiChild)
self.__cmd_intf.setVisible('arc', hasMdiChild)
self.__cmd_intf.setVisible('ellipse', hasMdiChild)
self.__cmd_intf.setVisible('polygon', hasMdiChild)
self.__cmd_intf.setVisible('fillet', hasMdiChild)
self.__cmd_intf.setVisible('chamfer', hasMdiChild)
self.__cmd_intf.setVisible('bisect', hasMdiChild)
self.__cmd_intf.setVisible('text', hasMdiChild)
#Dimension
self.__cmd_intf.setVisible('dimension', hasMdiChild)
#View
self.__cmd_intf.setVisible('fit', hasMdiChild)
self.__cmd_intf.setVisible('zoomwindow', hasMdiChild)
self.__cmd_intf.setVisible('zoomitem', hasMdiChild)
#snap
self.__cmd_intf.setVisible('snapauto', hasMdiChild)
self.__cmd_intf.setVisible('snapend', hasMdiChild)
self.__cmd_intf.setVisible('snapmid', hasMdiChild)
self.__cmd_intf.setVisible('snapcen', hasMdiChild)
self.__cmd_intf.setVisible('snapper', hasMdiChild)
self.__cmd_intf.setVisible('snaptan', False)
self.__cmd_intf.setVisible('snapqua', hasMdiChild)
self.__cmd_intf.setVisible('snap00', hasMdiChild)
self.__cmd_intf.setVisible('snapint', hasMdiChild)
#Tools
self.__cmd_intf.setVisible('info2p', hasMdiChild)
#window
self.__cmd_intf.setVisible('tile', hasMdiChild)
self.__cmd_intf.setVisible('cascade', hasMdiChild)
self.__cmd_intf.setVisible('next', hasMdiChild)
self.__cmd_intf.setVisible('previous', hasMdiChild)
#hasSelection = (self.activeMdiChild() is not None and
# self.activeMdiChild().textCursor().hasSelection())
#self.cutAct.setEnabled(hasSelection)
#self.copyAct.setEnabled(hasSelection)
#StatusBAR Satus Tools
self.forceDirectionStatus.setEnabled(hasMdiChild)
self.GridStatus.setEnabled(hasMdiChild)
self.SnapStatus.setEnabled(hasMdiChild)
#@+node:1.20130426141258.3591: *3* createMdiChild
def createMdiChild(self, file=None):
"""
Create new IDocument
"""
if file:
newDoc = self.__application.openDocument(file)
else:
newDoc = self.__application.newDocument()
for mdiwind in self.mdiArea.subWindowList():
if mdiwind._IDocument__document.dbPath == file:
child = mdiwind
break
else:
child = IDocument(newDoc, self.__cmd_intf, self)
self.mdiArea.addSubWindow(child)
#child.copyAvailable.connect(self.cutAct.setEnabled)
#child.copyAvailable.connect(self.copyAct.setEnabled)
return child
#@+node:1.20130426141258.3592: *3* _registerCommands
#def setAppDocActiveOnUi(self, doc):
# self.mdiArea.
def _registerCommands(self):
'''
Register all commands that are handed by this object
'''
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'new',
'&New Drawing', self._onNewDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'open',
'&Open Drawing...',
self._onOpenDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File,
'import', '&Import Drawing...',
self._onImportDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File,
'saveas', '&Save As...',
self._onSaveAsDrawing)
#
# Create recentFile structure
#
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
i = 0
for file in self.Application.getRecentFiles:
fileName = self.strippedName(file)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File,
'file_' + str(i), fileName,
self._onOpenRecent)
i += 1
#
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'close',
'&Close', self._onCloseDrawing)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'print',
'&Print', self._onPrint)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'quit',
'&Quit', self.close)
# Edit
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'undo',
'&Undo', self._onUndo)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'redo',
'&Redo', self._onRedo)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit,
'property', '&Property',
self._onProperty)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit,
'preferences', '&User Preferences',
self.preferences)
#Modify
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify,
'copy', '&Copy', self._onCopy)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify,
'move', '&Move', self._onMove)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify,
'rotate', '&Rotate', self._onRotate)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify,
'mirror', '&Mirror', self._onMirror)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify,
'delete', '&Delete', self._onDelete)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify,
'trim', '&Trim', self._onTrim)
# Draw
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'point',
'&Point', self._onPoint)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'segment', '&Segment', self._onSegment)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'rectangle', '&Rectangle',
self._onRectangle)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'polyline', '&Polyline',
self._onPolyline)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'circle', '&Circle', self._onCircle)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'arc',
'&Arc', self._onArc)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'ellipse', '&Ellipse', self._onEllipse)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'polygon', '&Polygon', self._onPolygon)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'fillet', '&Fillet', self._onFillet)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'chamfer', '&Chamfer', self._onChamfer)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw,
'bisect', '&Bisect', self._onBisect)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'text',
'&Text', self._onText)
# Dimension
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Dimension,
'dimension', '&Aligned Dimension',
self._onDimension)
# View
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'fit',
'&Fit', self._onFit)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View,
'zoomwindow', 'Zoom&Window',
self._onZoomWindow)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View,
'zoomitem', 'Zoom&Item',
self._onCenterItem)
# Snap
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapauto', 'Automatic Snap',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapend', 'End', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapmid', 'Middle',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapint', 'Intersection',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapper', 'Perpendicular',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapcen', 'Center',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snapqua', 'Quadrant',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snaptan', 'Tangent',
self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap,
'snap00', 'Origin',
self._onSnapCommand)
#Tools
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Tools,
'info2p', 'Info Two Points',
self._onInfo2p)
#--menu: Windows
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows,
'tile', '&Tile', self._onTile)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows,
'cascade', '&Cascade', self._onCascade)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows,
'next', 'Ne&xt',
self.mdiArea.activateNextSubWindow)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows,
'previous', 'Pre&vious',
self.mdiArea.activatePreviousSubWindow)
# Help
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Help, 'about',
'&About PythonCAD', self._onAbout)
return
#@+node:1.20130426141258.3593: *3* updateRecentFileList
def updateRecentFileList(self):
"""
update the menu recent file list
"""
i = 0
for file in self.Application.getRecentFiles:
fileName = self.strippedName(file)
self.__cmd_intf.updateText('file_' + str(i), fileName)
i += 1
#@+node:1.20130426141258.3594: *3* strippedName
def strippedName(self, fullFileName):
"""
get only the name of the filePath
"""
return QtCore.QFileInfo(fullFileName).fileName()
#@+node:1.20130426141258.3595: *3* _onNewDrawing
# ########################################## ON COMMANDS
# ##########################################################
def _onNewDrawing(self):
'''
Create a new drawing
'''
child = self.createMdiChild()
child.show()
self.updateRecentFileList()
return
#@+node:1.20130426141258.3596: *3* _onOpenDrawing
def _onOpenDrawing(self):
'''
Open an existing drawing PDR or DXF
'''
# ask the user to select an existing drawing
drawing = str(
QtGui.QFileDialog.getOpenFileName(parent=self,
directory=self.lastDirectory,
caption="Open Drawing",
filter="Drawings (*.pdr *.dxf)"))
# open a document and load the drawing
if len(drawing) > 0:
self.lastDirectory = os.path.split(drawing)[0]
(name, extension) = os.path.splitext(drawing)
if extension.upper() == '.DXF':
child = self.createMdiChild()
child.importExternalFormat(drawing)
elif extension.upper() == '.PDR':
child = self.createMdiChild(drawing)
else:
self.critical("Wrong command selected")
return
child.show()
self.updateRecentFileList()
self.view.fit()
return
#@+node:1.20130426141258.3597: *3* _onImportDrawing
def _onImportDrawing(self):
'''
Import existing drawing in current drawing (some issues with PyQt4.7)
'''
drawing = QtGui.QFileDialog.getOpenFileName(
parent=self,
caption="Import Drawing",
directory=self.lastDirectory,
filter="Dxf (*.dxf)")
# open a document and load the drawing
if len(drawing) > 0:
self.lastDirectory = os.path.split(drawing)[0]
self.mdiArea.activeSubWindow().importExternalFormat(drawing)
return
#@+node:1.20130426141258.3598: *3* _onOpenRecent
def _onOpenRecent(self):
"""
on open recent file
"""
#FIXME: if in the command line we insert file_1 or file_2
#here we get en error action dose not have command attributes
# action is en edit command not an action and have an empty value
action = self.sender()
if action:
spool, index = action.command.split('_')
fileName = self.Application.getRecentFiles[int(index)]
if len(fileName) > 0:
child = self.createMdiChild(fileName)
child.show()
self.updateRecentFileList()
self.view.fit()
return
#@+node:1.20130426141258.3599: *3* _onSaveAsDrawing
def _onSaveAsDrawing(self):
drawing = QtGui.QFileDialog.getSaveFileName(
self, "Save As...", "/home", filter="Drawings (*.pdr *.dxf)")
if len(drawing) > 0:
self.__application.saveAs(drawing)
#@+node:1.20130426141258.3600: *3* _onPrint
def _onPrint(self):
# printer.setPaperSize(QPrinter.A4);
self.scene.clearSelection()
printer = QtGui.QPrinter()
printDialog = QtGui.QPrintDialog(printer)
if (printDialog.exec_() == QtGui.QDialog.Accepted):
painter = QtGui.QPainter()
painter.begin(printer)
painter.setRenderHint(QtGui.QPainter.Antialiasing)
#self.mdiArea.activeSubWindow().scene.render(painter)
self.mdiArea.activeSubWindow().view.render(painter)
painter.end()
self.statusBar().showMessage("Ready")
return
#@+node:1.20130426141258.3601: *3* _onCloseDrawing
def _onCloseDrawing(self):
path = self.mdiArea.activeSubWindow().fileName
self.__application.closeDocument(path)
self.mdiArea.closeActiveSubWindow()
return
#@+node:1.20130426141258.3602: *3* _onPoint
#---------------------ON COMMANDS in DRAW
def _onPoint(self):
self.statusBar().showMessage("CMD:Point")
self.callCommand('POINT')
return
#@+node:1.20130426141258.3603: *3* _onSegment
def _onSegment(self):
self.statusBar().showMessage("CMD:Segment")
self.callCommand('SEGMENT')
return
#@+node:1.20130426141258.3604: *3* _onCircle
def _onCircle(self):
self.statusBar().showMessage("CMD:Circle")
self.callCommand('CIRCLE')
return
#@+node:1.20130426141258.3605: *3* _onArc
def _onArc(self):
self.statusBar().showMessage("CMD:Arc")
self.callCommand('ARC')
return
#@+node:1.20130426141258.3606: *3* _onEllipse
def _onEllipse(self):
self.statusBar().showMessage("CMD:Ellipse")
self.callCommand('ELLIPSE')
return
#@+node:1.20130426141258.3607: *3* _onRectangle
def _onRectangle(self):
self.statusBar().showMessage("CMD:Rectangle")
self.callCommand('RECTANGLE')
return
#@+node:1.20130426141258.3608: *3* _onPolygon
def _onPolygon(self):
self.statusBar().showMessage("CMD:Polygon")
self.callCommand('POLYGON')
return
#@+node:1.20130426141258.3609: *3* _onPolyline
def _onPolyline(self):
self.statusBar().showMessage("CMD:Polyline")
self.callCommand('POLYLINE')
return
#@+node:1.20130426141258.3610: *3* _onFillet
def _onFillet(self):
self.statusBar().showMessage("CMD:Fillet")
self.callCommand('FILLET')
return
#@+node:1.20130426141258.3611: *3* _onChamfer
def _onChamfer(self):
self.statusBar().showMessage("CMD:Chamfer")
self.callCommand('CHAMFER')
return
#@+node:1.20130426141258.3612: *3* _onBisect
def _onBisect(self):
self.statusBar().showMessage("CMD:Bisect")
self.callCommand('BISECTOR')
return
#@+node:1.20130426141258.3613: *3* _onText
def _onText(self):
self.statusBar().showMessage("CMD:Text")
self.callCommand('TEXT')
return
#@+node:1.20130426141258.3614: *3* _onDimension
def _onDimension(self):
self.statusBar().showMessage("CMD:Dimension")
self.callCommand('DIMENSION')
return
#@+node:1.20130426141258.3615: *3* _onUndo
#-------------------------ON COMMANDS in EDIT
def _onUndo(self):
self.scene.clearSelection()
try:
self.mdiArea.activeSubWindow().unDo()
except UndoDbExc:
self.critical("Unable To Perform Undo")
self.statusBar().showMessage("Ready")
return
#@+node:1.20130426141258.3616: *3* _onRedo
def _onRedo(self):
self.scene.clearSelection()
try:
self.mdiArea.activeSubWindow().reDo()
except UndoDbExc:
self.critical("Unable To Perform Redo")
self.statusBar().showMessage("Ready")
#@+node:1.20130426141258.3617: *3* _onProperty
def _onProperty(self):
self.statusBar().showMessage("CMD:Property")
self.callCommand('PROPERTY')
#@+node:1.20130426141258.3618: *3* preferences
def preferences(self):
p = Preferences(self)
#TODO: Fill up preferences
if (p.exec_() == QtGui.QDialog.Accepted):
#TODO: save Preferences
pass
#@+node:1.20130426141258.3619: *3* _onCopy
#---------------------------ON COMMANDS in MODIFY
def _onCopy(self):
self.statusBar().showMessage("CMD:Copy")
self.callCommand('COPY')
return
#@+node:1.20130426141258.3620: *3* _onMove
def _onMove(self):
self.statusBar().showMessage("CMD:Move")
self.callCommand('MOVE')
return
#@+node:1.20130426141258.3621: *3* _onDelete
def _onDelete(self):
self.statusBar().showMessage("CMD:Delete")
self.callCommand('DELETE')
self.statusBar().showMessage("Ready")
return
#@+node:1.20130426141258.3622: *3* _onTrim
def _onTrim(self):
self.statusBar().showMessage("CMD:Trim")
self.callCommand('TRIM')
self.statusBar().showMessage("Ready")
return
#@+node:1.20130426141258.3623: *3* _onMirror
def _onMirror(self):
self.statusBar().showMessage("CMD:Mirror")
self.callCommand('MIRROR')
return
#@+node:1.20130426141258.3624: *3* _onRotate
def _onRotate(self):
self.statusBar().showMessage("CMD:Rotate")
self.callCommand('ROTATE')
return
#@+node:1.20130426141258.3625: *3* _onFit
#---------------------------ON COMMANDS in VIEW
def _onFit(self):
self.view.fit()
#@+node:1.20130426141258.3626: *3* _onZoomWindow
def _onZoomWindow(self):
self.statusBar().showMessage("CMD:ZoomWindow")
self.scene._cmdZoomWindow = True
#@+node:1.20130426141258.3627: *3* _onCenterItem
def _onCenterItem(self):
self.view.centerOnSelection()
#@+node:1.20130426141258.3628: *3* _onSnapCommand
#---------------------------ON COMMANDS in SNAP
def _onSnapCommand(self):
"""
On snep Command action
"""
#__________SNAP NONE?
self.scene.clearSelection()
action = self.sender()
if action:
if action.command == "snapauto":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["LIST"])
elif action.command == "snapend":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["END"])
elif action.command == "snapmid":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["MID"])
elif action.command == "snapcen":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["CENTER"])
elif action.command == "snapper":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ORTHO"])
elif action.command == "snaptan":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["TANGENT"])
elif action.command == "snapqua":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["QUADRANT"])
elif action.command == "snap00":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ORIG"])
elif action.command == "snapint":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["INTERSECTION"])
else:
self.scene.setActiveSnap(SNAP_POINT_ARRAY["LIST"])
#@+node:1.20130426141258.3629: *3* _onInfo2p
#------------------------ON COMMANDS in TOOLS
def _onInfo2p(self):
"""
on info two point command
"""
self.scene.clearSelection()
self.statusBar().showMessage("CMD:Info2Points")
self.callCommand('DISTANCE2POINT', 'document')
return
#@+node:1.20130426141258.3630: *3* _onTile
#-- - - -=- - - - -=on commands in menu: Windows
def _onTile(self): #<-(by: S-PM 110524)
"on Tile command" #standard "Documentation String"
self.mdiArea.tileSubWindows() #--call "tile" method
return
#@+node:1.20130426141258.3631: *3* _onCascade
#_onTile>
def _onCascade(self): #<-(by: S-PM 110524)
"on Cascade command" #standard "Documentation String"
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
# Prologue
def cascadeFit(self): #<-"Fit" function definition
#--Register
rgL = [] #List
rgN = 0 #Integer
rgGp = None #General purpose
#--Action
rgL = self.mdiArea.subWindowList() #--get child-List,
rgN = len(rgL) # and child-count
if (rgN < 1): return (rgN) #no sub-window: exit
rgW = self.mdiArea.width() #--get actually available room
rgH = self.mdiArea.height()
#--compute cascade offset dimensions
if (rgN < 2): #<-less than 2 sub-windows: no offset
rgCx = 0
rgCy = 0
elif (rgN > 1): #<-more than 1 sub-window: get offset
rgCx = rgL[1].x()
rgCy = rgL[1].y()
#>
rgCx = rgCx * (rgN - 1) #compute total cascade offset
rgCy = rgCy * (rgN - 1)
#<-loop resize all sub-windows, so to fit them into available room
for rgGp in rgL:
rgGp.resize(rgW - rgCx, rgH - rgCy)
#>
return (rgN)
#cascadeFit>
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
# Action
#--call "cascade" method, as-is (rudimentary)
self.mdiArea.cascadeSubWindows()
rgN = cascadeFit(self) #"fit" all sub-windows into available room
return
#@+node:1.20130426141258.3632: *3* _onAbout
#encoding: utf-8
#_onCascade>
#-----------------------ON COMMANDS in ABOUT
def _onAbout(self):
QtGui.QMessageBox.about(
self, "About PythonCAD",
"""<b>PythonCAD</b> is a CAD package written, surprisingly enough, in Python using the PyQt4 interface.<p>
The PythonCAD project aims to produce a scriptable, open-source,
easy to use CAD package for any Python/PyQt supported Platforms
<p>
This is an Alfa Release For The new R38 Vesion <b>(R38.0.0.5)<b><P>
<p>
<a href="http://sourceforge.net/projects/pythoncad/">PythonCAD Web Site On Sourceforge</a>
<p>
<a href="http://pythoncad.sourceforge.net/dokuwiki/doku.php">PythonCAD Wiki Page</a>
<p>
註解: 這是一個利用 Leo 編輯器開發的版本.
""")
return
#@+node:1.20130426141258.3633: *3* callCommand
# ########################################## CALL COMMAND
# ##########################################################
def callCommand(self, commandName, commandFrom=None):
"""
call a document command (kernel)
"""
try:
if commandFrom == None or commandFrom == 'kernel':
self.scene.activeKernelCommand = self.__application.getCommand(
commandName)
elif commandFrom == 'document':
self.scene.activeKernelCommand = self.getCommand(commandName)
else:
return
self.scene.activeICommand = ICommand(self.scene)
self.scene.activeICommand.updateInput += self.updateInput
self.updateInput(self.scene.activeKernelCommand.activeMessage)
except EntityMissing:
self.scene.cancelCommand()
self.critical(
"You need to have an active document to perform this command")
#checks if scene has selected items and launches them directly to the ICommand
#if it's first prompt it's "give me entities"
if len(self.scene.selectedItems()) > 0:
if self.scene.activeKernelCommand.activeException(
) == ExcMultiEntity:
qtItems = [
item for item in self.scene.selectedItems()
if isinstance(item, BaseEntity)
]
self.scene.activeICommand.addMauseEvent(point=None,
entity=qtItems,
force=None)
else:
self.scene.clearSelection()
#@+node:1.20130426141258.3634: *3* getCommand
def getCommand(self, name):
"""
get an interface command
"""
if name in INTERFACE_COMMAND:
return INTERFACE_COMMAND[name](
self.mdiArea.activeSubWindow().document,
self.mdiArea.activeSubWindow())
else:
self.critical("Wrong command")
#@+node:1.20130426141258.3635: *3* updateInput
def updateInput(self, message):
self.__cmd_intf.commandLine.printMsg(str(message))
self.statusBar().showMessage(str(message))
#@+node:1.20130426141258.3636: *3* critical
@staticmethod
def critical(text):
'''
Shows an critical message dialog
'''
dlg = QtGui.QMessageBox()
dlg.setText(text)
dlg.setIcon(QtGui.QMessageBox.Critical)
dlg.exec_()
return
#@+node:1.20130426141258.3637: *3* readSettings
# ########################################## SETTINGS STORAGE
# ##########################################################
def readSettings(self):
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
# Method to restore application settings saved at previous session end.
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
#-create application settings object, platform-independent.
# Requires two names: Organization, Application
# here given as <?>hardcoded values, an example of primitive coding
lRg = QtCore.QSettings('PythonCAD', 'MDI Settings')
lRg.beginGroup("CadWindow") #get this settings group
if (bool(lRg.value("maximized", False))): #<-window "maximized":
self.showMaximized()
else: #<-window not "maximized": use last window parameters
lRg1 = lRg.value("size", QtCore.QSize(800, 600)).toSize()
lRg2 = lRg.value("pos", QtCore.QPoint(400, 300)).toPoint()
self.resize(lRg1)
self.move(lRg2)
#>
lRg.endGroup() #close the group
lRg.beginGroup("CadWindowState") #now this other group
self.restoreState(bytearray(lRg.value('State')))
lRg.endGroup() #close the group
#@+node:1.20130426141258.3638: *3* writeSettings
#readSettings>
def writeSettings(self):
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
# Method to save current settings at the application exit.
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
#-create application settings object (see: "readSettings")
lRg = QtCore.QSettings('PythonCAD', 'MDI Settings')
lRg.beginGroup("CadWindow") #-save this group of settings
lRg.setValue('pos', self.pos())
lRg.setValue('size', self.size())
lRg.setValue('maximized', self.isMaximized())
lRg.endGroup() #close
lRg.beginGroup("CadWindowState") #-now this other group
lRg.setValue("state", self.saveState())
lRg.endGroup() #close
#@+node:1.20130426141258.3639: *3* activeMdiChild
#writeSettings>
# ########################################## END SETTINGS STORAGE
# ##########################################################
def activeMdiChild(self):
activeSubWindow = self.mdiArea.activeSubWindow()
if activeSubWindow:
return activeSubWindow.widget()
return None
#@+node:1.20130426141258.3640: *3* switchLayoutDirection
def switchLayoutDirection(self):
if self.layoutDirection() == QtCore.Qt.LeftToRight:
QtGui.qApp.setLayoutDirection(QtCore.Qt.RightToLeft)
else:
QtGui.qApp.setLayoutDirection(QtCore.Qt.LeftToRight)
#@+node:1.20130426141258.3641: *3* setActiveSubWindow
def setActiveSubWindow(self, window):
if window:
self.mdiArea.setActiveSubWindow(window)
#@+node:1.20130426141258.3642: *3* _getIcon
def _getIcon(self, cmd):
'''
Create an QIcon object based on the command name.
The name of the icon is ':/images/' + cmd + '.png'.
If the cmd = 'Open', the name of the icon is ':/images/Open.png'.
'''
icon_name = cmd + '.png'
icon_path = os.path.join(os.path.join(os.getcwd(), 'icons'), icon_name)
# check if icon exist
if os.path.exists(icon_path):
icon = QtGui.QIcon(icon_path)
return icon
# icon not found, don't use an icon, return None
return None
#@+node:1.20130426141258.3643: *3* keyPressEvent
def keyPressEvent(self, event):
if event.key() == QtCore.Qt.Key_Escape:
self.resetCommand()
super(CadWindowMdi, self).keyPressEvent(event)
#@+node:1.20130426141258.3644: *3* plotFromSympy
# ########################################## SYMPY INTEGRATION
# ##########################################################
def plotFromSympy(self, objects):
"""
plot the sympy Object into PythonCAD
"""
if self.mdiArea.currentSubWindow() == None:
self._onNewDrawing()
for obj in objects:
self.plotSympyEntity(obj)
#@+node:1.20130426141258.3645: *3* plotSympyEntity
def plotSympyEntity(self, sympyEntity):
"""
plot the sympy entity
"""
self.mdiArea.currentSubWindow().document.saveSympyEnt(sympyEntity)
#@+node:1.20130426141258.3646: *3* createSympyDocument
def createSympyDocument(self):
"""
create a new document to be used by sympy plugin
"""
self._onNewDrawing()
#@+node:1.20130426141258.3647: *3* getSympyObject
def getSympyObject(self):
"""
get an array of sympy object
"""
#if self.Application.ActiveDocument==None:
if self.mdiArea.currentSubWindow() == None:
raise StructuralError("unable to get the active document")
ents = self.mdiArea.currentSubWindow().scene.getAllBaseEntity()
return [ents[ent].geoItem.getSympy() for ent in ents if ent != None]
class CadWindowMdi(QtWidgets.QMainWindow):
def __init__(self):
super(CadWindowMdi, self).__init__()
self.mdiArea = QtWidgets.QMdiArea()
self.mdiArea.setHorizontalScrollBarPolicy(QtCore.Qt.ScrollBarAsNeeded)
self.mdiArea.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAsNeeded)
self.setCentralWidget(self.mdiArea)
self.mdiArea.subWindowActivated.connect(self.subWindowActivatedEvent)
self.oldSubWin=None
# self.readSettings() #now works for position and size, support for toolbars is still missing(http://www.opendocs.net/pyqt/pyqt4/html/qsettings.html)
self.setWindowTitle("PythonCAD")
qIcon=self._getIcon('pythoncad')
if qIcon:
self.setWindowIcon(qIcon)
self.setUnifiedTitleAndToolBarOnMac(True)
#pythoncad kernel
self.__application = Application()
self.__cmd_intf = CmdIntf(self)
#self.__cmd_intf.FunctionHandler.commandExecuted+=self.commandExecuted
# create all dock windows
self._createDockWindows()
# create status bar
self._createStatusBar()
self.setUnifiedTitleAndToolBarOnMac(True)
self._registerCommands()
self.updateMenus()
self.lastDirectory=os.getenv('USERPROFILE') or os.getenv('HOME')
self.readSettings() #now works for position and size and ismaximized, and finally toolbar position
return
@property
def scene(self):
if self.mdiArea.activeSubWindow():
return self.mdiArea.activeSubWindow().scene
@property
def view(self):
if self.mdiArea.activeSubWindow():
return self.mdiArea.activeSubWindow().view
@property
def Application(self):
"""
get the kernel application object
"""
return self.__application
@property
def LayerDock(self):
"""
get the layer tree dockable window
"""
return self.__layer_dock
# ###############################################STATUSBAR
# ##########################################################
def _createStatusBar(self):
'''
Creates the statusbar object.
'''
self.statusBar().showMessage("Ready")
#------------------------------------------------------------------------------------Create status buttons
#Force Direction
self.forceDirectionStatus=statusButton('SForceDir.png', 'Orthogonal Mode [right click will in the future set increment constrain angle]')
self.forceDirectionStatus.clicked.connect(self.setForceDirection)
self.forceDirectionStatus.setMenu(getPolarMenu())
self.statusBar().addPermanentWidget(self.forceDirectionStatus)
#Snap
self.SnapStatus=statusButton('SSnap.png', 'Snap [right click displays snap list]\n for future implementation it should be a checkist')
self.SnapStatus.clicked.connect(self.setSnapStatus)
self.SnapStatus.setMenu(self.__cmd_intf.Category.getMenu(6))
self.SnapStatus.setChecked(True)
self.statusBar().addPermanentWidget(self.SnapStatus)
#Grid
self.GridStatus=statusButton('SGrid.png', 'Grid Mode [not available yet]')
self.GridStatus.clicked.connect(self.setGrid)
self.statusBar().addPermanentWidget(self.GridStatus)
#------------------------------------------------------------------------------------Set coordinates label on statusbar (updated by idocumet)
self.coordLabel=QtWidgets.QLabel("x=0.000\ny=0.000")
self.coordLabel.setAlignment(QtCore.Qt.AlignVCenter)
self.coordLabel.setFrameStyle(QtWidgets.QFrame.Panel | QtWidgets.QFrame.Sunken)
self.coordLabel.setMinimumWidth(80)
self.coordLabel.setMaximumHeight(20)
self.coordLabel.setFont(QtGui.QFont("Sans", 6))
self.statusBar().addPermanentWidget(self.coordLabel)
def setForceDirection(self):
if self.forceDirectionStatus.isChecked():
self.scene.forceDirectionEnabled=True
self.forceDirectionStatus.setFocus(False)
if self.scene.activeICommand!=None and self.scene.fromPoint!=None:
self.scene.GuideHandler.show()
else:
self.scene.forceDirectionEnabled=False
self.scene.GuideHandler.hide()
def setSnapStatus(self):
if self.SnapStatus.isChecked():
self.scene.snappingPoint.activeSnap=SNAP_POINT_ARRAY['LIST']
else:
self.scene.snappingPoint.activeSnap=SNAP_POINT_ARRAY['NONE']
def setGrid(self):
pass
# ###############################################END STATUSBAR
# ##########################################################
def commandExecuted(self):
self.resetCommand()
def _createDockWindows(self):
'''
Creates all dockable windows for the application
'''
# commandline
command_dock = self.__cmd_intf.commandLine
# if the commandline exists, add it
if not command_dock is None:
self.addDockWidget(QtCore.Qt.BottomDockWidgetArea, command_dock)
return
def closeEvent(self, event):
"""
manage close event
"""
self.mdiArea.closeAllSubWindows()
if self.activeMdiChild():
event.ignore()
else:
self.writeSettings()
event.accept()
def writeSettings(self):
settings = QtCore.QSettings('PythonCAD', 'MDI Settings')
def subWindowActivatedEvent(self):
"""
Sub windows activation
"""
if self.mdiArea.activeSubWindow():
if (self.mdiArea.activeSubWindow().document!=
self.__application.ActiveDocument):
self.resetCommand()
self.__application.ActiveDocument=self.mdiArea.activeSubWindow().document
self.updateMenus()
def resetCommand(self):
"""
Resect the active command
"""
self.__cmd_intf.resetCommand()
if self.scene!=None:
self.scene.cancelCommand()
self.statusBar().showMessage("Ready")
# ################################# SET if ICON AND MENU are ENABLED
# ##########################################################
def updateMenus(self):
"""
update menu status
"""
hasMdiChild = (self.activeMdiChild() is not None)
#File
self.__cmd_intf.setVisible('import', hasMdiChild)
self.__cmd_intf.setVisible('saveas', hasMdiChild)
self.__cmd_intf.setVisible('close', hasMdiChild)
self.__cmd_intf.setVisible('print', hasMdiChild)
#Edit
self.__cmd_intf.setVisible('undo', hasMdiChild)
self.__cmd_intf.setVisible('redo', hasMdiChild)
self.__cmd_intf.setVisible('copy', hasMdiChild)
self.__cmd_intf.setVisible('move', hasMdiChild)
self.__cmd_intf.setVisible('delete', hasMdiChild)
self.__cmd_intf.setVisible('mirror', hasMdiChild)
self.__cmd_intf.setVisible('rotate', hasMdiChild)
self.__cmd_intf.setVisible('trim', hasMdiChild)
self.__cmd_intf.setVisible('property', hasMdiChild)
#Draw
self.__cmd_intf.setVisible('point', hasMdiChild)
self.__cmd_intf.setVisible('segment', hasMdiChild)
self.__cmd_intf.setVisible('rectangle', hasMdiChild)
self.__cmd_intf.setVisible('polyline', hasMdiChild)
self.__cmd_intf.setVisible('circle', hasMdiChild)
self.__cmd_intf.setVisible('arc', hasMdiChild)
self.__cmd_intf.setVisible('ellipse', hasMdiChild)
self.__cmd_intf.setVisible('polygon', hasMdiChild)
self.__cmd_intf.setVisible('fillet', hasMdiChild)
self.__cmd_intf.setVisible('chamfer', hasMdiChild)
self.__cmd_intf.setVisible('bisect', hasMdiChild)
self.__cmd_intf.setVisible('text', hasMdiChild)
#Dimension
self.__cmd_intf.setVisible('dimension', hasMdiChild)
#View
self.__cmd_intf.setVisible('fit', hasMdiChild)
self.__cmd_intf.setVisible('zoomwindow', hasMdiChild)
self.__cmd_intf.setVisible('zoomitem', hasMdiChild)
#snap
self.__cmd_intf.setVisible('snapauto', hasMdiChild)
self.__cmd_intf.setVisible('snapend', hasMdiChild)
self.__cmd_intf.setVisible('snapmid', hasMdiChild)
self.__cmd_intf.setVisible('snapcen', hasMdiChild)
self.__cmd_intf.setVisible('snapper', hasMdiChild)
self.__cmd_intf.setVisible('snaptan', False)
self.__cmd_intf.setVisible('snapqua', hasMdiChild)
self.__cmd_intf.setVisible('snap00', hasMdiChild)
self.__cmd_intf.setVisible('snapint', hasMdiChild)
#Tools
self.__cmd_intf.setVisible('info2p', hasMdiChild)
#window
self.__cmd_intf.setVisible('tile', hasMdiChild)
self.__cmd_intf.setVisible('cascade', hasMdiChild)
self.__cmd_intf.setVisible('next', hasMdiChild)
self.__cmd_intf.setVisible('previous', hasMdiChild)
#hasSelection = (self.activeMdiChild() is not None and
# self.activeMdiChild().textCursor().hasSelection())
#self.cutAct.setEnabled(hasSelection)
#self.copyAct.setEnabled(hasSelection)
#StatusBAR Satus Tools
self.forceDirectionStatus.setEnabled(hasMdiChild)
self.GridStatus.setEnabled(hasMdiChild)
self.SnapStatus.setEnabled(hasMdiChild)
def createMdiChild(self, file=None):
"""
Create new IDocument
"""
if file:
newDoc=self.__application.openDocument(file)
else:
newDoc=self.__application.newDocument()
for mdiwind in self.mdiArea.subWindowList():
if mdiwind._IDocument__document.dbPath==file:
child=mdiwind
break
else:
child = IDocument(newDoc,self.__cmd_intf, self)
self.mdiArea.addSubWindow(child)
#child.copyAvailable.connect(self.cutAct.setEnabled)
#child.copyAvailable.connect(self.copyAct.setEnabled)
return child
#def setAppDocActiveOnUi(self, doc):
# self.mdiArea.
def _registerCommands(self):
'''
Register all commands that are handed by this object
'''
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'new', '&New Drawing', self._onNewDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'open', '&Open Drawing...', self._onOpenDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'import', '&Import Drawing...', self._onImportDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'saveas', '&Save As...', self._onSaveAsDrawing)
#
# Create recentFile structure
#
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
i=0
for file in self.Application.getRecentFiles:
fileName=self.strippedName(file)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'file_'+str(i), fileName, self._onOpenRecent)
i+=1
#
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'close', '&Close', self._onCloseDrawing)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'print', '&Print', self._onPrint)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'quit', '&Quit', self.close)
# Edit
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'undo', '&Undo', self._onUndo)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'redo', '&Redo', self._onRedo)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'property', '&Property', self._onProperty)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'preferences', '&User Preferences', self.preferences)
#Modify
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'copy', '&Copy', self._onCopy)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'move', '&Move', self._onMove)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'rotate', '&Rotate', self._onRotate)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'mirror', '&Mirror', self._onMirror)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'delete', '&Delete', self._onDelete)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'trim', '&Trim', self._onTrim)
# Draw
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'point', '&Point', self._onPoint)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'segment', '&Segment', self._onSegment)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'rectangle', '&Rectangle', self._onRectangle)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'polyline', '&Polyline', self._onPolyline)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'circle', '&Circle', self._onCircle)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'arc', '&Arc', self._onArc)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'ellipse', '&Ellipse', self._onEllipse)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'polygon', '&Polygon', self._onPolygon)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'fillet', '&Fillet', self._onFillet)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'chamfer', '&Chamfer', self._onChamfer)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'bisect', '&Bisect', self._onBisect)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'text', '&Text', self._onText)
# Dimension
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Dimension, 'dimension', '&Aligned Dimension', self._onDimension)
# View
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'fit', '&Fit', self._onFit)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'zoomwindow', 'Zoom&Window', self._onZoomWindow)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'zoomitem', 'Zoom&Item',self._onCenterItem)
# Snap
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapauto', 'Automatic Snap', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapend', 'End', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapmid', 'Middle', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapint', 'Intersection', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapper', 'Perpendicular', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapcen', 'Center', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snapqua', 'Quadrant', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snaptan', 'Tangent', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'snap00', 'Origin', self._onSnapCommand)
#Tools
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Tools, 'info2p', 'Info Two Points', self._onInfo2p)
#--menu: Windows
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'tile', '&Tile', self._onTile)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'cascade', '&Cascade', self._onCascade)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'next', 'Ne&xt', self.mdiArea.activateNextSubWindow)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'previous', 'Pre&vious', self.mdiArea.activatePreviousSubWindow)
# Help
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Help, 'about', '&About PythonCAD', self._onAbout)
return
def updateRecentFileList(self):
"""
update the menu recent file list
"""
i=0
for file in self.Application.getRecentFiles:
fileName=self.strippedName(file)
self.__cmd_intf.updateText('file_'+str(i), fileName)
i+=1
def strippedName(self, fullFileName):
"""
get only the name of the filePath
"""
# 正確取得 stripped file name
return QtCore.QFileInfo(fullFileName).fileName()
# ########################################## ON COMMANDS
# ##########################################################
def _onNewDrawing(self):
'''
Create a new drawing
'''
child = self.createMdiChild()
child.show()
self.updateRecentFileList()
return
def _onOpenDrawing(self):
'''
Open an existing drawing PDR or DXF
'''
# ask the user to select an existing drawing
# 可以正確打開檔案, 與 PyQt4 不同
drawing = str(QtWidgets.QFileDialog.getOpenFileName(parent=self,directory=self.lastDirectory, caption ="Open Drawing", filter ="Drawings (*.pdr *.dxf)")[0])
# open a document and load the drawing
#print("drawing is:", drawing)
if len(drawing)>0:
self.lastDirectory=os.path.split(drawing)[0]
(name, extension)=os.path.splitext(drawing)
if extension.upper()=='.DXF':
child = self.createMdiChild()
child.importExternalFormat(drawing)
elif extension.upper()=='.PDR':
child = self.createMdiChild(drawing)
else:
self.critical("Wrong command selected")
return
child.show()
self.updateRecentFileList()
self.view.fit()
return
def _onImportDrawing(self):
'''
Import existing drawing in current drawing (some issues with PyQt4.7)
'''
drawing = QtWidgets.QFileDialog.getOpenFileName(parent=self, caption="Import Drawing", directory=self.lastDirectory, filter="Dxf (*.dxf)")[0]
# open a document and load the drawing
if len(drawing)>0:
self.lastDirectory=os.path.split(drawing)[0]
self.mdiArea.activeSubWindow().importExternalFormat(drawing)
return
def _onOpenRecent(self):
"""
on open recent file
"""
#FIXME: if in the command line we insert file_1 or file_2
#here we get en error action dose not have command attributes
# action is en edit command not an action and have an empty value
action = self.sender()
if action:
spool, index=action.command.split('_')
fileName=self.Application.getRecentFiles[int(index)]
if len(fileName)>0:
child = self.createMdiChild(fileName)
child.show()
self.updateRecentFileList()
self.view.fit()
return
def _onSaveAsDrawing(self):
drawing = QtWidgets.QFileDialog.getSaveFileName(self, "Save As...", "/home", filter ="Drawings (*.pdr *.dxf)")[0]
if len(drawing)>0:
self.__application.saveAs(drawing)
def _onPrint(self):
# printer.setPaperSize(QPrinter.A4);
self.scene.clearSelection()
printer=QtPrintSupport.QPrinter()
printDialog=QtPrintSupport.QPrintDialog(printer)
if (printDialog.exec_() == QtWidgets.QDialog.Accepted):
painter=QtGui.QPainter()
painter.begin(printer)
painter.setRenderHint(QtGui.QPainter.Antialiasing);
#self.mdiArea.activeSubWindow().scene.render(painter)
self.mdiArea.activeSubWindow().view.render(painter)
painter.end()
self.statusBar().showMessage("Ready")
return
def _onCloseDrawing(self):
path=self.mdiArea.activeSubWindow().fileName
self.__application.closeDocument(path)
self.mdiArea.closeActiveSubWindow()
return
#---------------------ON COMMANDS in DRAW
def _onPoint(self):
self.statusBar().showMessage("CMD:Point")
self.callCommand('POINT')
return
def _onSegment(self):
self.statusBar().showMessage("CMD:Segment")
self.callCommand('SEGMENT')
return
def _onCircle(self):
self.statusBar().showMessage("CMD:Circle")
self.callCommand('CIRCLE')
return
def _onArc(self):
self.statusBar().showMessage("CMD:Arc")
self.callCommand('ARC')
return
def _onEllipse(self):
self.statusBar().showMessage("CMD:Ellipse")
self.callCommand('ELLIPSE')
return
def _onRectangle(self):
self.statusBar().showMessage("CMD:Rectangle")
self.callCommand('RECTANGLE')
return
def _onPolygon(self):
self.statusBar().showMessage("CMD:Polygon")
self.callCommand('POLYGON')
return
def _onPolyline(self):
self.statusBar().showMessage("CMD:Polyline")
self.callCommand('POLYLINE')
return
def _onFillet(self):
self.statusBar().showMessage("CMD:Fillet")
self.callCommand('FILLET')
return
def _onChamfer(self):
self.statusBar().showMessage("CMD:Chamfer")
self.callCommand('CHAMFER')
return
def _onBisect(self):
self.statusBar().showMessage("CMD:Bisect")
self.callCommand('BISECTOR')
return
def _onText(self):
self.statusBar().showMessage("CMD:Text")
self.callCommand('TEXT')
return
def _onDimension(self):
self.statusBar().showMessage("CMD:Dimension")
self.callCommand('DIMENSION')
return
#-------------------------ON COMMANDS in EDIT
def _onUndo(self):
self.scene.clearSelection()
try:
self.mdiArea.activeSubWindow().unDo()
except UndoDbExc:
self.critical("Unable To Perform Undo")
self.statusBar().showMessage("Ready")
return
def _onRedo(self):
self.scene.clearSelection()
try:
self.mdiArea.activeSubWindow().reDo()
except UndoDbExc:
self.critical("Unable To Perform Redo")
self.statusBar().showMessage("Ready")
def _onProperty(self):
self.statusBar().showMessage("CMD:Property")
self.callCommand('PROPERTY')
def preferences(self):
p=Preferences(self)
#TODO: Fill up preferences
if (p.exec_() == QtWidgets.QDialog.Accepted):
#TODO: save Preferences
pass
#---------------------------ON COMMANDS in MODIFY
def _onCopy(self):
self.statusBar().showMessage("CMD:Copy")
self.callCommand('COPY')
return
def _onMove(self):
self.statusBar().showMessage("CMD:Move")
self.callCommand('MOVE')
return
def _onDelete(self):
self.statusBar().showMessage("CMD:Delete")
self.callCommand('DELETE')
self.statusBar().showMessage("Ready")
return
def _onTrim(self):
self.statusBar().showMessage("CMD:Trim")
self.callCommand('TRIM')
self.statusBar().showMessage("Ready")
return
def _onMirror(self):
self.statusBar().showMessage("CMD:Mirror")
self.callCommand('MIRROR')
return
def _onRotate(self):
self.statusBar().showMessage("CMD:Rotate")
self.callCommand('ROTATE')
return
#---------------------------ON COMMANDS in VIEW
def _onFit(self):
self.view.fit()
def _onZoomWindow(self):
self.statusBar().showMessage("CMD:ZoomWindow")
self.scene._cmdZoomWindow=True
def _onCenterItem(self):
self.view.centerOnSelection()
#---------------------------ON COMMANDS in SNAP
def _onSnapCommand(self):
"""
On snep Command action
"""
#__________SNAP NONE?
self.scene.clearSelection()
action = self.sender()
if action:
if action.command=="snapauto":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["LIST"])
elif action.command=="snapend":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["END"])
elif action.command=="snapmid":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["MID"])
elif action.command=="snapcen":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["CENTER"])
elif action.command=="snapper":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ORTHO"])
elif action.command=="snaptan":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["TANGENT"])
elif action.command=="snapqua":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["QUADRANT"])
elif action.command=="snap00":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ORIG"])
elif action.command=="snapint":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["INTERSECTION"])
else:
self.scene.setActiveSnap(SNAP_POINT_ARRAY["LIST"])
#------------------------ON COMMANDS in TOOLS
def _onInfo2p(self):
"""
on info two point command
"""
self.scene.clearSelection()
self.statusBar().showMessage("CMD:Info2Points")
self.callCommand('DISTANCE2POINT', 'document')
return
#-- - - -=- - - - -=on commands in menu: Windows
def _onTile(self): #<-(by: S-PM 110524)
"on Tile command" #standard "Documentation String"
self.mdiArea.tileSubWindows() #--call "tile" method
return
#_onTile>
def _onCascade(self): #<-(by: S-PM 110524)
"on Cascade command" #standard "Documentation String"
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
# Prologue
def cascadeFit(self): #<-"Fit" function definition
#--Register
rgL=[] #List
rgN=0 #Integer
rgGp=None #General purpose
#--Action
rgL=self.mdiArea.subWindowList() #--get child-List,
rgN=len(rgL) # and child-count
if (rgN<1): return(rgN) #no sub-window: exit
rgW = self.mdiArea.width() #--get actually available room
rgH = self.mdiArea.height()
#--compute cascade offset dimensions
if (rgN<2): #<-less than 2 sub-windows: no offset
rgCx=0
rgCy=0
elif (rgN>1): #<-more than 1 sub-window: get offset
rgCx=rgL[1].x()
rgCy=rgL[1].y()
#>
rgCx=rgCx*(rgN-1) #compute total cascade offset
rgCy=rgCy*(rgN-1)
#<-loop resize all sub-windows, so to fit them into available room
for rgGp in rgL:
rgGp.resize(rgW-rgCx, rgH-rgCy)
#>
return(rgN)
#cascadeFit>
#-- - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=- - - - -=
# Action
#--call "cascade" method, as-is (rudimentary)
self.mdiArea.cascadeSubWindows()
rgN=cascadeFit(self) #"fit" all sub-windows into available room
return
#encoding: utf-8
#_onCascade>
#-----------------------ON COMMANDS in ABOUT
def _onAbout(self):
QtWidgets.QMessageBox.about(self, "About PythonCAD",
"""<b>PythonCAD</b> is a CAD package written, surprisingly enough, in Python using the PyQt5 interface.<p>
The PythonCAD project aims to produce a scriptable, open-source,
easy to use CAD package for any Python/PyQt supported Platforms
<p>
This is an Alfa Release For The new R38 Vesion <b>(R38.0.0.5)<b><P>
<p>
<a href="http://sourceforge.net/projects/pythoncad/">PythonCAD Web Site On Sourceforge</a>
<p>
<a href="http://pythoncad.sourceforge.net/dokuwiki/doku.php">PythonCAD Wiki Page</a>
<p>
由 KMOL 改為 Python3 與 PyQt5 版本
""")
return
# ########################################## CALL COMMAND
# ##########################################################
def callCommand(self, commandName, commandFrom=None):
"""
call a document command (kernel)
"""
try:
if commandFrom==None or commandFrom=='kernel':
self.scene.activeKernelCommand=self.__application.getCommand(commandName)
elif commandFrom=='document':
self.scene.activeKernelCommand=self.getCommand(commandName)
else:
return
self.scene.activeICommand=ICommand(self.scene)
self.scene.activeICommand.updateInput+=self.updateInput
self.updateInput(self.scene.activeKernelCommand.activeMessage)
except EntityMissing:
self.scene.cancelCommand()
self.critical("You need to have an active document to perform this command")
#checks if scene has selected items and launches them directly to the ICommand
#if it's first prompt it's "give me entities"
if len(self.scene.selectedItems())>0:
if self.scene.activeKernelCommand.activeException()==ExcMultiEntity:
qtItems=[item for item in self.scene.selectedItems() if isinstance(item, BaseEntity)]
self.scene.activeICommand.addMauseEvent(point=None,
entity=qtItems,
force=None)
else:
self.scene.clearSelection()
def getCommand(self, name):
"""
get an interface command
"""
if name in INTERFACE_COMMAND:
return INTERFACE_COMMAND[name](self.mdiArea.activeSubWindow().document,
self.mdiArea.activeSubWindow())
else:
self.critical("Wrong command")
def updateInput(self, message):
self.__cmd_intf.commandLine.printMsg(str(message))
self.statusBar().showMessage(str(message))
@staticmethod
def critical(text):
'''
Shows an critical message dialog
'''
dlg = QtWidgets.QMessageBox()
dlg.setText(text)
dlg.setIcon(QtWidgets.QMessageBox.Critical)
dlg.exec_()
return
# ########################################## SETTINGS STORAGE
# ##########################################################
def readSettings(self):
settings = QtCore.QSettings('PythonCAD', 'MDI Settings')
settings.beginGroup("CadWindow")
max = settings.value("maximized", False)
# settings.setValue("size", QtCore.QSize(800, 600))
# settings.setValue("pos", QtCore.QPoint(400, 300))
if max == True: # if cadwindow was maximized set it maximized again
self.showMaximized()
else: # else set it to the previous position and size
try:
self.resize(settings.value("size").toSize()) # self.resize(settings.value("size", QtCore.QSize(800, 600)).toSize())
self.move(settings.value("pos").toPoint()) # self.move(settings.value("pos", QtCore.QPoint(400, 300)).toPoint())+
#self.resize(settings.value("size", QtCore.QSize(800, 600)))
#self.move(settings.value("pos", QtCore.QPoint(400, 300)))
#self.resize(settings.value("size"))
#self.move(settings.value("pos"))
except:
print("Warning: unable to set the previews values")
settings.endGroup()
settings.beginGroup("CadWindowState")
try:
self.restoreState(settings.value('State').toByteArray())
except:
print("Warning: Unable to set state")
settings.endGroup()
# ########################################## END SETTINGS STORAGE
# ##########################################################
def activeMdiChild(self):
activeSubWindow = self.mdiArea.activeSubWindow()
if activeSubWindow:
return activeSubWindow.widget()
return None
def switchLayoutDirection(self):
if self.layoutDirection() == QtCore.Qt.LeftToRight:
QtWidgets.QApplication.setLayoutDirection(QtCore.Qt.RightToLeft)
else:
QtWidgets.QApplication.setLayoutDirection(QtCore.Qt.LeftToRight)
def setActiveSubWindow(self, window):
if window:
self.mdiArea.setActiveSubWindow(window)
def _getIcon(self, cmd):
'''
Create an QIcon object based on the command name.
The name of the icon is ':/images/' + cmd + '.png'.
If the cmd = 'Open', the name of the icon is ':/images/Open.png'.
'''
icon_name = cmd + '.png'
icon_path = os.path.join(os.path.join(os.getcwd(), 'icons'), icon_name)
# check if icon exist
if os.path.exists(icon_path):
icon = QtGui.QIcon(icon_path)
return icon
# icon not found, don't use an icon, return None
return None
def keyPressEvent(self, event):
if event.key()==QtCore.Qt.Key_Escape:
self.resetCommand()
super(CadWindowMdi, self).keyPressEvent(event)
# ########################################## SYMPY INTEGRATION
# ##########################################################
def plotFromSympy(self, objects):
"""
plot the sympy Object into PythonCAD
"""
if self.mdiArea.currentSubWindow()==None:
self._onNewDrawing()
for obj in objects:
self.plotSympyEntity(obj)
def plotSympyEntity(self, sympyEntity):
"""
plot the sympy entity
"""
self.mdiArea.currentSubWindow().document.saveSympyEnt(sympyEntity)
def createSympyDocument(self):
"""
create a new document to be used by sympy plugin
"""
self._onNewDrawing()
def getSympyObject(self):
"""
get an array of sympy object
"""
#if self.Application.ActiveDocument==None:
if self.mdiArea.currentSubWindow()==None:
raise StructuralError("unable to get the active document")
ents=self.mdiArea.currentSubWindow().scene.getAllBaseEntity()
return [ents[ent].geoItem.getSympy() for ent in ents if ent!=None]
class CadWindowMdi(QtWidgets.QMainWindow):
def __init__(self):
super(CadWindowMdi, self).__init__()
self.mdiArea = QtWidgets.QMdiArea()
self.mdiArea.setHorizontalScrollBarPolicy(QtCore.Qt.ScrollBarAsNeeded)
self.mdiArea.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAsNeeded)
self.setCentralWidget(self.mdiArea)
self.mdiArea.subWindowActivated.connect(self.subWindowActivatedEvent)
# self.readSettings() #now works for position and size, support for toolbars is still missing(http://www.opendocs.net/pyqt/pyqt4/html/qsettings.html)
self.setWindowTitle("PythonCAD")
qIcon = self._getIcon('pythoncad')
if qIcon:
self.setWindowIcon(qIcon)
self.setUnifiedTitleAndToolBarOnMac(True)
#pythoncad kernel
self.__application = Application()
self.__cmd_intf = CmdIntf(self)
#self.__cmd_intf.FunctionHandler.commandExecuted+=self.commandExecuted
# create all dock windows
self._createDockWindows()
# create status bar
self._createStatusBar()
self.setUnifiedTitleAndToolBarOnMac(True)
self._registerCommands()
self.updateMenus()
self.lastDirectory = os.getenv('USERPROFILE') or os.getenv('HOME')
self.readSettings() #now works for position and size and ismaximized, and finally toolbar position
return
@property
def scene(self):
if self.mdiArea.activeSubWindow():
return self.mdiArea.activeSubWindow().scene
@property
def view(self):
if self.mdiArea.activeSubWindow():
return self.mdiArea.activeSubWindow().view
@property
def Application(self):
"""
get the kernel application object
"""
return self.__application
@property
def LayerDock(self):
"""
get the layer tree dockable window
"""
return self.__layer_dock
# ###############################################STATUSBAR
# ##########################################################
def _createStatusBar(self):
'''
Creates the statusbar object.
'''
self.statusBar().showMessage("Ready")
#------------------------------------------------------------------------------------Create status buttons
#Force Direction
self.forceDirectionStatus = statusButton('SForceDir.png', 'Orthogonal Mode [right click will in the future set increment constrain angle]')
# self.connect(self.forceDirectionStatus, QtCore.SIGNAL('clicked()'), self.setForceDirection) # old, for new, help here: http://qt-project.org/wiki/Signals_and_Slots_in_PySide
# http://stackoverflow.com/questions/15080731/call-a-function-when-a-button-is-pressed-pyqt
self.forceDirectionStatus.clicked.connect(self.setForceDirection)
self.statusBar().addPermanentWidget(self.forceDirectionStatus)
#Snap
self.SnapStatus = statusButton('SSnap.png', 'Snap [right click displays snap list]\n for future implementation it should be a checkist')
# self.connect(self.SnapStatus, QtCore.SIGNAL('clicked()'), self.setSnapStatus)
self.SnapStatus.clicked.connect(self.setSnapStatus)
self.SnapStatus.setMenu(self.__cmd_intf.Category.getMenu(5))
self.statusBar().addPermanentWidget(self.SnapStatus)
#Grid
self.GridStatus = statusButton('SGrid.png', 'Grid Mode [not available yet]')
# self.connect(self.GridStatus, QtCore.SIGNAL('clicked()'), self.setGrid)
self.GridStatus.clicked.connect(self.setGrid)
self.statusBar().addPermanentWidget(self.GridStatus)
#------------------------------------------------------------------------------------Set coordinates label on statusbar (updated by idocumet)
self.coordLabel = QtWidgets.QLabel("x=0.000\ny=0.000")
self.coordLabel.setAlignment(QtCore.Qt.AlignVCenter)
self.coordLabel.setFrameStyle(QtWidgets.QFrame.Panel | QtWidgets.QFrame.Sunken)
self.coordLabel.setMinimumWidth(80)
self.coordLabel.setMaximumHeight(20)
self.coordLabel.setFont(QtGui.QFont("Sans", 6))
self.statusBar().addPermanentWidget(self.coordLabel)
def setForceDirection(self):
if self.forceDirectionStatus.isChecked():
print("abilita")
self.scene.forceDirection = True
self.forceDirectionStatus.setFocus(False)
else:
self.scene.forceDirection = False
def setSnapStatus(self):
print("status")
pass
def setGrid(self):
pass
# ###############################################END STATUSBAR
# ##########################################################
def commandExecuted(self):
self.resetCommand()
def _createDockWindows(self):
'''
Creates all dockable windows for the application
'''
# commandline
command_dock = self.__cmd_intf.commandLine
# if the commandline exists, add it
if not command_dock is None:
self.addDockWidget(QtCore.Qt.BottomDockWidgetArea, command_dock)
return
def closeEvent(self, event):
"""
manage close event
"""
self.mdiArea.closeAllSubWindows()
if self.activeMdiChild():
event.ignore()
else:
self.writeSettings()
event.accept()
def subWindowActivatedEvent(self):
"""
Sub windows activation
"""
if self.mdiArea.activeSubWindow():
self.resetCommand()
self.__application.setActiveDocument(self.mdiArea.activeSubWindow().document)
self.updateMenus()
def resetCommand(self):
"""
Resect the active command
"""
self.__cmd_intf.resetCommand()
if self.scene != None:
self.scene.cancelCommand()
self.statusBar().showMessage("Ready")
# ################################# SET if ICON AND MENU are ENABLED
# ##########################################################
def updateMenus(self):
"""
update menu status
"""
hasMdiChild = (self.activeMdiChild() is not None)
#File
self.__cmd_intf.setVisible('import', hasMdiChild)
self.__cmd_intf.setVisible('saveas', hasMdiChild)
self.__cmd_intf.setVisible('close', hasMdiChild)
self.__cmd_intf.setVisible('print', hasMdiChild)
#Edit
self.__cmd_intf.setVisible('undo', hasMdiChild)
self.__cmd_intf.setVisible('redo', hasMdiChild)
self.__cmd_intf.setVisible('copy', hasMdiChild)
self.__cmd_intf.setVisible('move', hasMdiChild)
self.__cmd_intf.setVisible('delete', hasMdiChild)
self.__cmd_intf.setVisible('mirror', hasMdiChild)
self.__cmd_intf.setVisible('rotate', hasMdiChild)
#Draw
self.__cmd_intf.setVisible('point', hasMdiChild)
self.__cmd_intf.setVisible('segment', hasMdiChild)
self.__cmd_intf.setVisible('rectangle', hasMdiChild)
self.__cmd_intf.setVisible('polyline', hasMdiChild)
self.__cmd_intf.setVisible('arc', hasMdiChild)
self.__cmd_intf.setVisible('ellipse', hasMdiChild)
self.__cmd_intf.setVisible('polygon', hasMdiChild)
self.__cmd_intf.setVisible('fillet', hasMdiChild)
self.__cmd_intf.setVisible('chamfer', hasMdiChild)
self.__cmd_intf.setVisible('bisect', hasMdiChild)
self.__cmd_intf.setVisible('text', hasMdiChild)
#View
self.__cmd_intf.setVisible('fit', hasMdiChild)
self.__cmd_intf.setVisible('zoomwindow', hasMdiChild)
self.__cmd_intf.setVisible('zoomitem', hasMdiChild)
#snap
self.__cmd_intf.setVisible('autosnap', hasMdiChild)
self.__cmd_intf.setVisible('endsnap', hasMdiChild)
self.__cmd_intf.setVisible('middlesnap', hasMdiChild)
self.__cmd_intf.setVisible('centersnap', hasMdiChild)
self.__cmd_intf.setVisible('ortosnap', False)
self.__cmd_intf.setVisible('tangentsnap', False)
self.__cmd_intf.setVisible('quadrantsnap', hasMdiChild)
self.__cmd_intf.setVisible('originsnap', hasMdiChild)
self.__cmd_intf.setVisible('intersection', hasMdiChild)
#Tools
self.__cmd_intf.setVisible('info2p', hasMdiChild)
#window
self.__cmd_intf.setVisible('tile', hasMdiChild)
self.__cmd_intf.setVisible('cascade', hasMdiChild)
self.__cmd_intf.setVisible('next', hasMdiChild)
self.__cmd_intf.setVisible('previous', hasMdiChild)
#hasSelection = (self.activeMdiChild() is not None and
# self.activeMdiChild().textCursor().hasSelection())
#self.cutAct.setEnabled(hasSelection)
#self.copyAct.setEnabled(hasSelection)
#StatusBAR Satus Tools
self.forceDirectionStatus.setEnabled(hasMdiChild)
self.GridStatus.setEnabled(hasMdiChild)
self.SnapStatus.setEnabled(hasMdiChild)
def createMdiChild(self, file=None):
"""
Create new IDocument
"""
if file:
newDoc = self.__application.openDocument(file)
else:
newDoc = self.__application.newDocument()
for mdiwind in self.mdiArea.subWindowList():
if mdiwind._IDocument__document.dbPath == file:
child = mdiwind
break
else:
child = IDocument(newDoc,self.__cmd_intf, self)
self.mdiArea.addSubWindow(child)
# child.copyAvailable.connect(self.cutAct.setEnabled)
# child.copyAvailable.connect(self.copyAct.setEnabled)
return child
# def setAppDocActiveOnUi(self, doc):
# self.mdiArea.
def _registerCommands(self):
'''
Register all commands that are handed by this object
'''
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'new', '&New Drawing', self._onNewDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'open', '&Open Drawing...', self._onOpenDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'import', '&Import Drawing...', self._onImportDrawing)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'saveas', '&Save In A Different location...', self._onSaveAsDrawing)
#
# Create recentFile structure
#
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
i = 0
for file in self.Application.getRecentFiles:
fileName = self.strippedName(file)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'file_' + str(i), fileName, self._onOpenRecent)
i += 1
#
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'close', '&Close', self._onCloseDrawing)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'print', '&Print', self._onPrint)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.File, 'quit', '&Quit PyCAD', self.close)
# Edit
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'undo', '&Undo', self._onUndo)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'redo', '&Redo', self._onRedo)
# separator
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Edit, 'preferences', '&User Preferences', self.preferences)
#Modify
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'copy', '&Copy', self._onCopy)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'move', '&Move', self._onMove)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'rotate', '&Rotate', self._onRotate)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'mirror', '&Mirror', self._onMirror)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Modify, 'delete', '&Delete', self._onDelete)
# Draw
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'point', '&Point', self._onPoint)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'segment', '&Segment', self._onSegment)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'rectangle', '&Rectangle', self._onRectangle)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'polyline', '&Polyline', self._onPolyline)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'arc', '&Arc', self._onArc)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'ellipse', '&Ellipse', self._onEllipse)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'polygon', '&polygon', self._onPolygon)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'fillet', '&Fillet', self._onFillet)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'chamfer', '&Chamfer', self._onChamfer)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'bisect', '&Bisect', self._onBisect)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, '-')
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Draw, 'text', '&Text', self._onText)
# View
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'fit', '&Fit', self._onFit)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'zoomwindow', 'Zoom&Window', self._onZoomWindow)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.View, 'zoomitem', 'Zoom&Item',self._onCenterItem)
# Snap
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'autosnap', 'Automatic Snap', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'endsnap', 'End', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'middlesnap', 'Middle', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'centersnap', 'Center', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'ortosnap', 'Ortogonal', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'tangentsnap', 'Tangent', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'quadrantsnap', 'Quadrant', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'intersection', 'Intersection', self._onSnapCommand)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Snap, 'originsnap', 'Origin', self._onSnapCommand)
#Tools
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Tools, 'info2p', 'Info Two Points', self._onInfo2p)
# window
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'tile', '&Tile', self.mdiArea.tileSubWindows)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'cascade', '&Cascade', self.mdiArea.cascadeSubWindows)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'next', 'Ne&xt', self.mdiArea.activateNextSubWindow)
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Windows, 'previous', 'Pre&vious', self.mdiArea.activatePreviousSubWindow)
# Help
self.__cmd_intf.registerCommand(self.__cmd_intf.Category.Help, 'about', '&About PyCAD', self._onAbout)
return
def updateRecentFileList(self):
"""
update the menu recent file list
"""
i=0
for file in self.Application.getRecentFiles:
fileName=self.strippedName(file)
self.__cmd_intf.updateText('file_'+str(i), fileName)
i+=1
def strippedName(self, fullFileName):
"""
get only the name of the filePath
"""
fullFileName_str = fullFileName[0]
return QtCore.QFileInfo(fullFileName_str).fileName()
# ########################################## ON COMMANDS
# ##########################################################
def _onNewDrawing(self):
'''
Create a new drawing
'''
child = self.createMdiChild()
child.show()
self.updateRecentFileList()
return
def _onOpenDrawing(self):
# ask the user to select an existing drawing
drawing = QtWidgets.QFileDialog.getOpenFileName(parent=self,directory=self.lastDirectory, caption ="Open Drawing", filter ="Drawings (*.pdr *.dxf)");
# open a document and load the drawing
if len(drawing) > 0:
# self.lastDirectory = os.path.split(drawing)[0]
self.lastDirectory = os.path.split(drawing[0])
# (name, extension) = os.path.splitext(drawing)
(name, extension) = os.path.splitext(drawing[0])
if extension.upper() == '.DXF':
child = self.createMdiChild()
child.importExternalFormat(drawing)
elif extension.upper() == '.PDR':
child = self.createMdiChild(drawing)
else:
self.critical("Wrong command selected")
return
child.show()
self.updateRecentFileList()
return
def _onImportDrawing(self):
drawing = QtGui.QFileDialog.getOpenFileName(parent=self, caption="Import Drawing", directory=self.lastDirectory, filter="Dxf (*.dxf)");
# open a document and load the drawing
if len(drawing)>0:
self.lastDirectory=os.path.split(drawing)[0]
self.mdiArea.activeSubWindow().importExternalFormat(drawing)
return
def _onOpenRecent(self):
"""
on open recent file
"""
#FIXME: if in the command line we insert file_1 or file_2
#here we get en error action dose not have command attributes
# action is en edit command not an action and have an empty value
action = self.sender()
if action:
spool, index=action.command.split('_')
fileName=self.Application.getRecentFiles[int(index)]
if len(fileName)>0:
child = self.createMdiChild(fileName)
child.show()
self.updateRecentFileList()
return
def _onSaveAsDrawing(self):
drawing = QtGui.QFileDialog.getSaveFileName(self, "Save As Drawing", "/home", "Drawings (*.pdr)");
if len(drawing)>0:
self.__application.saveAs(drawing)
def _onPrint(self):
# printer.setPaperSize(QPrinter.A4);
self.scene.clearSelection()
printer=QtGui.QPrinter()
printDialog=QtGui.QPrintDialog(printer)
if (printDialog.exec_() == QtGui.QDialog.Accepted):
painter=QtGui.QPainter()
painter.begin(printer)
painter.setRenderHint(QtGui.QPainter.Antialiasing);
#self.mdiArea.activeSubWindow().scene.render(painter)
self.mdiArea.activeSubWindow().view.render(painter)
painter.end()
self.statusBar().showMessage("Ready")
return
def _onCloseDrawing(self):
path=self.mdiArea.activeSubWindow().fileName
self.__application.closeDocument(path)
self.mdiArea.closeActiveSubWindow()
return
#---------------------ON COMMANDS in DRAW
def _onPoint(self):
self.statusBar().showMessage("CMD:Point")
self.callCommand('POINT')
return
def _onSegment(self):
self.statusBar().showMessage("CMD:Segment")
self.callCommand('SEGMENT')
return
def _onArc(self):
self.statusBar().showMessage("CMD:Arc")
self.callCommand('ARC')
return
def _onEllipse(self):
self.statusBar().showMessage("CMD:Ellipse")
self.callCommand('ELLIPSE')
return
def _onRectangle(self):
self.statusBar().showMessage("CMD:Rectangle")
self.callCommand('RECTANGLE')
return
def _onPolygon(self):
self.statusBar().showMessage("CMD:Polygon")
self.callCommand('POLYGON')
return
def _onPolyline(self):
self.statusBar().showMessage("CMD:Polyline")
self.callCommand('POLYLINE')
return
def _onFillet(self):
self.statusBar().showMessage("CMD:Fillet")
self.callCommand('FILLET')
return
def _onChamfer(self):
self.statusBar().showMessage("CMD:Chamfer")
self.callCommand('CHAMFER')
return
def _onBisect(self):
self.statusBar().showMessage("CMD:Bisect")
self.callCommand('BISECTOR')
return
def _onText(self):
self.statusBar().showMessage("CMD:Text")
self.callCommand('TEXT')
return
#-------------------------ON COMMANDS in EDIT
def _onUndo(self):
self.scene.clearSelection()
try:
self.mdiArea.activeSubWindow().unDo()
except UndoDbExc:
self.critical("Unable To Perform Undo")
self.statusBar().showMessage("Ready")
return
def _onRedo(self):
self.scene.clearSelection()
try:
self.mdiArea.activeSubWindow().reDo()
except UndoDbExc:
self.critical("Unable To Perform Redo")
self.statusBar().showMessage("Ready")
def preferences(self):
p=ConfigDialog()
#p.exec_()
#---------------------------ON COMMANDS in EDIT
def _onCopy(self):
self.statusBar().showMessage("CMD:Copy")
self.callCommand('COPY')
return
def _onMove(self):
self.statusBar().showMessage("CMD:Move")
self.callCommand('MOVE')
return
def _onDelete(self):
self.statusBar().showMessage("CMD:Delete")
self.callCommand('DELETE')
self.statusBar().showMessage("Ready")
return
def _onMirror(self):
self.statusBar().showMessage("CMD:Mirror")
self.callCommand('MIRROR')
return
def _onRotate(self):
self.statusBar().showMessage("CMD:Rotate")
self.callCommand('ROTATE')
return
#---------------------------ON COMMANDS in VIEW
def _onFit(self):
self.view.fit()
def _onZoomWindow(self):
self.statusBar().showMessage("CMD:ZoomWindow")
self.scene._cmdZoomWindow=True
def _onCenterItem(self):
self.view.centerOnSelection()
#---------------------------ON COMMANDS in SNAP
def _onSnapCommand(self):
"""
On snep Command action
"""
#__________SNAP NONE?
self.scene.clearSelection()
action = self.sender()
if action:
if action.command=="autosnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ALL"])
elif action.command=="endsnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["END"])
elif action.command=="middlesnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["MID"])
elif action.command=="centersnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["CENTER"])
elif action.command=="ortosnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ORTO"])
elif action.command=="tangentsnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["TANGENT"])
elif action.command=="quadrantsnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["QUADRANT"])
elif action.command=="originsnap":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ORIG"])
elif action.command=="intersection":
self.scene.setActiveSnap(SNAP_POINT_ARRAY["INTERSECTION"])
else:
self.scene.setActiveSnap(SNAP_POINT_ARRAY["ALL"])
#------------------------ON COMMANDS in TOOLS
def _onInfo2p(self):
"""
on info two point command
"""
self.scene.clearSelection()
self.statusBar().showMessage("CMD:Info2Points")
self.callCommand('DISTANCE2POINT', 'document')
return
#-----------------------ON COMMANDS in ABOUT
def _onAbout(self):
QtWidgets.QMessageBox.about(self, "About PythonCAD",
"""<b>PythonCAD</b> is a CAD package written, surprisingly enough, in Python using the PyQt4 interface.<p>
The PythonCAD project aims to produce a scriptable, open-source,
easy to use CAD package for any Python/PyQt supported Platforms
<p>
This is an Alfa Release For The new R38 Vesion <b>(R38.0.0.4)<b><P>
<p>
<a href="http://sourceforge.net/projects/pythoncad/">PythonCAD Web Site On Sourceforge</a>
<p>
<a href="http://pythoncad.sourceforge.net/dokuwiki/doku.php">PythonCAD Wiki Page</a>
""")
return
# ########################################## CALL COMMAND
# ##########################################################
def callCommand(self, commandName, commandFrom=None):
"""
call a document command (kernel)
"""
try:
if commandFrom==None or commandFrom=='kernel':
self.scene.activeKernelCommand=self.__application.getCommand(commandName)
elif commandFrom=='document':
self.scene.activeKernelCommand=self.getCommand(commandName)
else:
return
self.scene.activeICommand=ICommand(self.scene)
self.scene.activeICommand.updateInput+=self.updateInput
self.updateInput(self.scene.activeKernelCommand.activeMessage)
except EntityMissing:
self.scene.cancelCommand()
self.critical("You need to have an active document to perform this command")
#checks if scene has selected items and lauches them direclty to the Icommand if it's first prompt it's "give me entities"
if len(self.scene.selectedItems())>0:
print("selezioneesiste")
if self.scene.activeKernelCommand.activeException()==ExcMultiEntity:
qtItems=[item for item in self.scene.selectedItems() if isinstance(item, BaseEntity)]
self.scene.activeICommand.addMauseEvent(point=None,
entity=qtItems,
force=None)
else:
self.scene.clearSelection()
def getCommand(self, name):
"""
get an interface command
"""
if INTERFACE_COMMAND.has_key(name):
return INTERFACE_COMMAND[name](self.mdiArea.activeSubWindow().document,
self.mdiArea.activeSubWindow())
else:
self.critical("Wrong command")
def updateInput(self, message):
self.__cmd_intf.commandLine.printMsg(str(message))
self.statusBar().showMessage(str(message))
@staticmethod
def critical(text):
'''
Shows an critical message dialog
'''
dlg = QtGui.QMessageBox()
dlg.setText(text)
dlg.setIcon(QtGui.QMessageBox.Critical)
dlg.exec_()
return
# ########################################## SETTINGS STORAGE
# ##########################################################
def readSettings(self):
settings = QtCore.QSettings('PythonCAD', 'MDI Settings')
settings.beginGroup("CadWindow")
max = settings.value("maximized", False)
# settings.setValue("size", QtCore.QSize(800, 600))
# settings.setValue("pos", QtCore.QPoint(400, 300))
if max == True: # if cadwindow was maximized set it maximized again
self.showMaximized()
else: # else set it to the previous position and size
try:
self.resize(settings.value("size").toSize()) # self.resize(settings.value("size", QtCore.QSize(800, 600)).toSize())
self.move(settings.value("pos").toPoint()) # self.move(settings.value("pos", QtCore.QPoint(400, 300)).toPoint())+
#self.resize(settings.value("size", QtCore.QSize(800, 600)))
#self.move(settings.value("pos", QtCore.QPoint(400, 300)))
#self.resize(settings.value("size"))
#self.move(settings.value("pos"))
except:
print("Warning: unable to set the previews values")
settings.endGroup()
settings.beginGroup("CadWindowState")
try:
self.restoreState(settings.value('State').toByteArray())
except:
print("Warning: Unable to set state")
settings.endGroup()
def writeSettings(self):
settings = QtCore.QSettings('PythonCAD', 'MDI Settings')
settings.beginGroup("CadWindow")
settings.setValue('pos', self.pos())
settings.setValue('size', self.size())
settings.setValue('maximized', self.isMaximized())
settings.endGroup()
settings.beginGroup("CadWindowState")
settings.setValue("state", self.saveState())
settings.endGroup()
# ########################################## END SETTINGS STORAGE
# ##########################################################
def activeMdiChild(self):
activeSubWindow = self.mdiArea.activeSubWindow()
if activeSubWindow:
return activeSubWindow.widget()
return None
def switchLayoutDirection(self):
if self.layoutDirection() == QtCore.Qt.LeftToRight:
QtGui.qApp.setLayoutDirection(QtCore.Qt.RightToLeft)
else:
QtGui.qApp.setLayoutDirection(QtCore.Qt.LeftToRight)
def setActiveSubWindow(self, window):
if window:
self.mdiArea.setActiveSubWindow(window)
def _getIcon(self, cmd):
'''
Create an QIcon object based on the command name.
The name of the icon is ':/images/' + cmd + '.png'.
If the cmd = 'Open', the name of the icon is ':/images/Open.png'.
'''
icon_name = cmd + '.png'
icon_path = os.path.join(os.path.join(os.getcwd(), 'icons'), icon_name)
# check if icon exist
if os.path.exists(icon_path):
icon = QtGui.QIcon(icon_path)
return icon
# icon not found, don't use an icon, return None
return None
def keyPressEvent(self, event):
if event.key()==QtCore.Qt.Key_Escape:
self.resetCommand()
super(CadWindowMdi, self).keyPressEvent(event)
# ########################################## SYMPY INTEGRATION
# ##########################################################
def plotFromSympy(self, objects):
"""
plot the sympy Object into PythonCAD
"""
if self.mdiArea.currentSubWindow() == None:
self._onNewDrawing()
for obj in objects:
self.plotSympyEntity(obj)
def plotSympyEntity(self, sympyEntity):
"""
plot the sympy entity
"""
self.mdiArea.currentSubWindow().document.saveSympyEnt(sympyEntity)
def createSympyDocument(self):
"""
create a new document to be used by sympy plugin
"""
self._onNewDrawing()
def getSympyObject(self):
"""
get an array of sympy object
"""
#if self.Application.getActiveDocument()==None:
if self.mdiArea.currentSubWindow() == None:
raise StructuralError("unable to get the active document")
ents = self.mdiArea.currentSubWindow().scene.getAllBaseEntity()
return [ents[ent].geoItem.getSympy() for ent in ents if ent!=None]