def run_test(self):
"""
Execute the test
"""
# Call WCDMA VoiceCall base run_test function
LabWcdmaVcBase.run_test(self)
# Release any previous call (Robustness)
self._voice_call_api.release()
# Check PDP is active
self._ns_data_3g.check_data_connection_state("PDP_ACTIVE",
self._call_setup_time)
# Mobile Terminated originate call
self._ns_voice_call_3g.mt_originate_call()
# pylint: disable=E1101
# Wait for state "incoming" before callSetupTimeout seconds
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.INCOMING, self._call_setup_time)
# Answer call
self._voice_call_api.answer()
# Check call state "CONNECTED" before callSetupTimeout seconds
self._ns_voice_call_3g.check_call_connected(self._call_setup_time,
blocking=False)
# Wait for state "active" before callSetupTimeout seconds
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.ACTIVE, self._call_setup_time)
# Check PDP is active
self._ns_data_3g.check_data_connection_state("PDP_ACTIVE",
self._call_setup_time)
# Check call is connected for x seconds
# (x is CALL_DURATION value in seconds)
self._ns_voice_call_3g.is_voice_call_connected(self._call_duration)
# Network Release call
self._ns_voice_call_3g.voice_call_network_release()
# Check voice call state is "IDLE"
self._ns_voice_call_3g.check_call_state("IDLE",
self._call_setup_time,
blocking=False)
# Check voice call state is "no_call"
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.NOCALL, self._call_setup_time)
# Check PDP is active
self._ns_data_3g.check_data_connection_state("PDP_ACTIVE",
self._call_setup_time)
# pylint: enable=E1101
return Global.SUCCESS, "No errors"
def run_test(self):
"""
Execute the test
"""
# pylint: disable=E1101
# Disable this pylint error due to Enum class VOICE_CALL_STATE
# Call WCDMA VoiceCall base run_test function
LabWcdmaVcBase.run_test(self)
# Release any previous call (Robustness)
self._voice_call_api.release()
# Dial using PHONE_NUMBER parameter
self._voice_call_api.dial(self._phone_number)
# Check call state "CONNECTED" before callSetupTimeout seconds
self._ns_voice_call_3g.check_call_connected(self._call_setup_time,
blocking=False)
# Wait for state "active" before callSetupTimeout seconds
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.ACTIVE,
self._call_setup_time)
# Check call is connected for x seconds
# (x is CALL_DURATION value in seconds)
self._ns_voice_call_3g.is_voice_call_connected(self._call_duration)
# Network Release call
self._ns_voice_call_3g.voice_call_network_release()
# Check voice call state is "IDLE"
self._ns_voice_call_3g.check_call_state("IDLE",
self._call_setup_time,
blocking=False)
# Check voice call state is "no_call"
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.NOCALL,
self._call_setup_time)
# pylint: enable=E1101
return Global.SUCCESS, "No errors"
def run_test(self):
"""
Execute the test
"""
# pylint: disable=E1101
# Disable this pylint error due to Enum class VOICE_CALL_STATE
# Call Wcdma VoiceCall base run_test function
LabWcdmaVcBase.run_test(self)
# Update the list of RIL Emergency Numbers on the DUT
# This imperatively has to be done after settting the Flight Mode
self._logger.info("Add Emergency Number in ril.ecclist list")
if self._is_emergency_number:
# Update the property holding the Emergency Numbers list.
self._device.set_property_value(
LabWcdmaFlightmodeEmVc.EMERGENCY_NUMBER_PROPERTY_NAME,
self._phone_number)
self._logger.info("Add Emergency Number in NVM:cust.emergency list "
"at index %s" % self._index)
#Start up the proxy for sending AT commands
self.at_proxy_com_port = self._modem_flashing_api.start_at_proxy_from_mos(
int(self._launch_mode))
#check serial connection
self._serial_handler.set_data_analyser(
ATCommandAnalyser(self._expected_result))
self._serial_handler.set_default_timeout(self._command_timeout)
self._logger.info("Connecting to the port " +
str(self.at_proxy_com_port))
# Connect to the at proxy
self._serial_handler.connect(self.at_proxy_com_port)
# Check that the modem is available
modem_status = self._modem_flashing_api.ping_modem_from_serial(
self._serial_handler.get_serial())
if modem_status:
self._logger.info("AT Proxy correctly respond to ping command")
self.modem_available = True
else:
raise TestEquipmentException(
TestEquipmentException.CONNECTION_ERROR,
"Connection to AT proxy failed")
#Send AT@NVM to get initial parameters stored at index "self.index" for restore at
#finalize
self._logger.info("Read NVM:cust.emergency list at index %s" %
self._index)
inerrogate_at_nvm_command = self._command + "[" + \
str(self.index) + "]" + "?"
self._logger.info("Send AT command: %s" % inerrogate_at_nvm_command)
self._at_inter_nvm_em_verdict, at_nvm_params_to_be_rest_raw =\
self._serial_handler.send_at_command_and_get_result(inerrogate_at_nvm_command, self._command_timeout)
at_nvm_params_to_be_rest = re.match("{*.*}",
at_nvm_params_to_be_rest_raw)
at_nvm_params_to_be_rest = at_nvm_params_to_be_rest.group(0)
self._logger.info(
"Data read from NVM:cust.emergency list at index %s are: %s" %
(self._index, at_nvm_params_to_be_rest))
self.command_to_rest_em_in_nvm = "%s[%s]=%s" % (str(
self._command), str(self._index), str(at_nvm_params_to_be_rest))
#Send AT@NVM to add an emergency number to NNV emergency number list
self._logger.info("Add NVM:cust.emergency number \"%s\" "
"at index %s" % (self._phone_number, self._index))
self._at_set_nvm_em, msg = self._serial_handler.send_at_command_and_get_result(
self.command_to_add_em_in_nvm, self._command_timeout)
if msg == "OK":
self._logger.info("Response to AT command %s "
"is: %s" % (self.command_to_add_em_in_nvm, msg))
else:
raise DeviceException(
DeviceException.OPERATION_SET_ERROR,
"Response to AT command %s is: %s" %
(self.command_to_add_em_in_nvm, msg))
self._logger.info(
"Start the Emergency Call when DUT is in Flight Mode")
# Release any previous call (Robustness)
self._voice_call_api.release()
# Enable flight mode
self._networking_api.set_flight_mode("on")
# Wait 30 seconds to be sure that modem is down before dialing
time.sleep(30)
# Wake the screen otherwise the Voice Call will not be established
self._phone_system.wake_screen()
self._phone_system.set_phone_lock(0)
# Dial using PHONE_NUMBER parameter
self._voice_call_api.dial(self._phone_number)
# Check call state "CONNECTED" before callSetupTimeout seconds
self._ns_voice_call_3g.check_call_connected(self._call_setup_time,
blocking=False)
# Wait for state "active" before callSetupTimeout seconds
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.ACTIVE, self._call_setup_time)
# Check call is connected for CALL_DURATION seconds
self._ns_voice_call_3g.is_voice_call_connected(self._call_duration)
# Mobile Release call
self._voice_call_api.release()
# Check voice call state is "IDLE" (8960)
self._ns_voice_call_3g.check_call_state("IDLE",
self._call_setup_time,
blocking=False)
# pylint: disable=E1101
# Disable this pylint error due to Enum class VOICE_CALL_STATE
# Check voice call state is "no_call" (CDK)
time.sleep(self._wait_btwn_cmd)
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.NOCALL, self._call_setup_time)
# pylint: enable=E1101
# Disable flight mode
self._networking_api.set_flight_mode("off")
return Global.SUCCESS, "No errors"
def run_test(self):
"""
Execute the test
"""
# Call WCDMA VoiceCall base run_test function
LabWcdmaVcBase.run_test(self)
# Release any previous call (Robustness)
self._voice_call_api.release()
# Turn off the CLIP.
self._ns_voice_call_3g.include_calling_party_number("OFF")
# Calling the DUT from the network simulator.
self._ns_voice_call_3g.mt_originate_call()
# Waiting for the phone to receive the call, not need to answer the
# call.
# pylint: disable=E1101
# As pylint is not able to resolve enum types
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.INCOMING, self._call_setup_time)
# pylint: enable=E1101
# Once the alerting state has been reached release the call on the
# network simulator.
self._ns_voice_call_3g.voice_call_network_release()
time.sleep(self._wait_btwn_cmd)
# Getting the last call information from DUT.
(number, call_type,
_sim) = self._voice_call_api.get_last_call_details()
# Checking the last call type is missed.
self._logger.info("Checking last call type is MISSED.")
# pylint: disable=E1101
# As pylint is not able to resolve enum types
if call_type != str(self._uecmd_types.VOICE_CALL_TYPE.MISSED):
# pylint: enable=E1101
return (Global.FAILURE,
"Last call should be MISSED, is: %s" % call_type)
# Checking the last call number not displayed on the DUT.
self._logger.info("Checking last call number is private")
# "" is the phone number returned when the number is unknown
if number != "":
return (Global.FAILURE, "The CLIP is not included but the phone"
" number was shown. Incoming number: %s" % number)
time.sleep(self._wait_btwn_cmd)
# Turn the CLIP on.
self._ns_voice_call_3g.include_calling_party_number("ON")
self._ns_voice_call_3g.set_calling_party_pi("ALLOWED")
# Set the phone number the network simulator will use to call the DUT.
self._ns_voice_call_3g.set_calling_party_number(self._phone_number)
# Calling the DUT from the network simulator.
self._ns_voice_call_3g.mt_originate_call()
# Waiting for the phone to receive the call, not need to answer the
# call.
# pylint: disable=E1101
# As pylint is not able to resolve enum types
self._voice_call_api.wait_for_state(
self._uecmd_types.VOICE_CALL_STATE.INCOMING, self._call_setup_time)
# pylint: enable=E1101
self._ns_voice_call_3g.voice_call_network_release()
time.sleep(self._wait_btwn_cmd)
# Getting the last call information from DUT.
(number, call_type,
_sim) = self._voice_call_api.get_last_call_details()
# Checking the last call type is missed.
self._logger.info("Checking last call type is MISSED.")
# pylint: disable=E1101
# As pylint is not able to resolve enum types
if call_type != str(self._uecmd_types.VOICE_CALL_TYPE.MISSED):
# pylint: enable=E1101
return (Global.FAILURE,
"Last call should be MISSED, is: %s" % call_type)
# Checking the last call number is the expected one.
self._logger.info("Checking last call number is displayed on DUT and"
" is the same as the one given as parameter.")
if number != self._phone_number:
return (Global.FAILURE, "The CLIP is included but the phone"
" number shown on the DUT is not the same"
" as the one set on the network"
" simulator. Incoming number: %s" % number)
return Global.SUCCESS, "No errors"