def LArOFCCondAlgDefault():
mlog = logging.getLogger('LArOFCCondAlg')
mlog.info("entering LArOFCCondAlgDefault")
LArOnOffIdMapping()
condSeq = AthSequencer("AthCondSeq")
if hasattr (condSeq,"LArOFCCondAlg"):
return getattr(condSeq,"LArOFCCondAlg")
theOFCCondAlg=LArOFCCondAlg()
#theOFCCondAlg.MCSym = True
theOFCCondAlg.isMC = True
from LArROD.LArRODFlags import larRODFlags
from AthenaCommon.BeamFlags import jobproperties
theOFCCondAlg.firstSample = larRODFlags.firstSample()
theOFCCondAlg.useHighestGainAutoCorr = larRODFlags.useHighestGainAutoCorr()
if larRODFlags.doOFCPileupOptimization():
if larRODFlags.NumberOfCollisions():
theOFCCondAlg.Nminbias=larRODFlags.NumberOfCollisions()
mlog.info(" setup for Ncollisions %f ", larRODFlags.NumberOfCollisions())
else:
theOFCCondAlg.Nminbias=jobproperties.Beam.numberOfCollisions()
mlog.info(" setup for Ncollisions %f ", jobproperties.Beam.numberOfCollisions())
else:
theOFCCondAlg.Nminbias=0
mlog.info(" setup for no pileup optimization")
pass
condSeq+=theOFCCondAlg
return theOFCCondAlg
def __init__(self, name = 'LArDigitThinner', addToAlgSeq = True) :
super( DefaultLArDigitThinner, self ).__init__( name )
from AthenaCommon.BeamFlags import jobproperties
if jobproperties.Beam.beamType() == "cosmics" :
self.EnergyCuts_Barrel = [ 1000, 500, 1000, 1000 ] # values for [presampler, strips, mid, back ]
self.EnergyCuts_Endcap = [ 1000, 500, 1000, 1000 ] # values for [presampler, strips, mid, back ]
self.EnergyCut_HEC = 2000
self.EnergyCut_FCAL = 3000
else :
self.EnergyCuts_Barrel = [ 1000, 1000, 1000, 1000 ] # values for [presampler, strips, mid, back ]
self.EnergyCuts_Endcap = [ 2000, 2000, 2000, 2000 ] # values for [presampler, strips, mid, back ]
self.EnergyCut_HEC = 5000
self.EnergyCut_FCAL = 20000
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
from AthenaCommon.GlobalFlags import globalflags
if globalflags.DataSource()=='data':
if globalflags.InputFormat() == 'bytestream':
from LArByteStream.LArByteStreamConf import LArRawDataReadingAlg
if LArRawDataReadingAlg() not in topSequence:
topSequence+=LArRawDataReadingAlg()
self.InputContainerName="FREE"
LArOnOffIdMapping()
if addToAlgSeq :
topSequence += self
def LArADC2MeVCondAlgDefault():
LArOnOffIdMapping()
condSeq = AthSequencer("AthCondSeq")
if hasattr(condSeq, "LArADC2MeVCondAlg"):
return getattr(condSeq, "LArADC2MeVCondAlg")
theADC2MeVCondAlg = LArADC2MeVCondAlg(LArADC2MeVKey='LArADC2MeV')
if conddb.isMC:
from LArConditionsCommon.LArCondFlags import larCondFlags
if not larCondFlags.hasMphys():
theADC2MeVCondAlg.LArMphysOverMcalKey = "" #No MphysOVerMcal
else:
theADC2MeVCondAlg.LArMphysOverMcalKey = "LArMphysOverMcalSym"
if not larCondFlags.hasHVCorr():
theADC2MeVCondAlg.LArHVScaleCorrKey = ""
theADC2MeVCondAlg.LAruA2MeVKey = "LAruA2MeVSym"
theADC2MeVCondAlg.LArDAC2uAKey = "LArDAC2uASym"
theADC2MeVCondAlg.LArRampKey = "LArRampSym"
theADC2MeVCondAlg.UseFEBGainTresholds = False
else: # not MC:
from LArRecUtils.LArFebConfigCondAlgDefault import LArFebConfigCondAlgDefault
LArFebConfigCondAlgDefault()
if 'COMP200' in conddb.GetInstance(): # Run1 case
theADC2MeVCondAlg.LAruA2MeVKey = "LAruA2MeVSym"
theADC2MeVCondAlg.LArDAC2uAKey = "LArDAC2uASym"
condSeq += theADC2MeVCondAlg
return theADC2MeVCondAlg
def LArAutoCorrTotalCondAlgDefault():
mlog = logging.getLogger( 'LArAutoCorrTotalCondAlg::__init__ ' )
mlog.info("entering LArAutoCorrTotalCondAlgDefault")
LArOnOffIdMapping()
condSeq = AthSequencer("AthCondSeq")
if hasattr (condSeq,"LArAutoCorrTotalCondAlg"):
return getattr(condSeq,"LArAutoCorrTotalCondAlg")
theAutoCorrTotalCondAlg=LArAutoCorrTotalCondAlg()
from AthenaCommon.BeamFlags import jobproperties
from LArROD.LArRODFlags import larRODFlags
from AthenaCommon.SystemOfUnits import ns
theAutoCorrTotalCondAlg.Nsamples = larRODFlags.nSamples()
theAutoCorrTotalCondAlg.firstSample = larRODFlags.firstSample()
theAutoCorrTotalCondAlg.deltaBunch = int(jobproperties.Beam.bunchSpacing()/( 25.*ns)+0.5)
if larRODFlags.doOFCPileupOptimization():
if larRODFlags.NumberOfCollisions():
theAutoCorrTotalCondAlg.Nminbias=larRODFlags.NumberOfCollisions()
mlog.info(" setup for Ncollisions %f deltaBunch %f", larRODFlags.NumberOfCollisions(), jobproperties.Beam.bunchSpacing())
else:
theAutoCorrTotalCondAlg.Nminbias=jobproperties.Beam.numberOfCollisions()
mlog.info(" setup for Ncollisions %f deltaBunch %f", jobproperties.Beam.numberOfCollisions(), jobproperties.Beam.bunchSpacing())
else:
theAutoCorrTotalCondAlg.Nminbias=0
mlog.info(" setup for computing total noise autocorrelation without pileup")
condSeq+=theAutoCorrTotalCondAlg
return theAutoCorrTotalCondAlg
def LArBadChannelAccess(algname="LArBadChannelCondAlg", dbString=None):
from AthenaCommon.AlgSequence import AthSequencer
condSeq = AthSequencer("AthCondSeq")
if hasattr(condSeq, algname):
print("Access to bad Feb info already set up")
return
from LArCabling.LArCablingAccess import LArOnOffIdMapping
LArOnOffIdMapping()
from IOVDbSvc.CondDB import conddb
if dbString is not None:
foldername = conddb.extractFolder(dbString)
conddb.addFolder("", dbString, className="CondAttrListCollection")
else:
if conddb.isOnline:
foldername = "/LAR/BadChannels/BadChannels"
conddb.addFolder("LAR",
foldername,
className="CondAttrListCollection")
else:
foldername = "/LAR/BadChannelsOfl/BadChannels"
conddb.addFolder("LAR_OFL",
foldername,
className="CondAttrListCollection")
pass
pass
from LArBadChannelTool.LArBadChannelToolConf import LArBadChannelCondAlg
theLArBadChannelCondAlg = LArBadChannelCondAlg(algname)
theLArBadChannelCondAlg.ReadKey = foldername
condSeq += theLArBadChannelCondAlg
return
def LArAutoCorrNoiseCondAlgDefault():
LArOnOffIdMapping()
LArMCSymCondAlgDefault()
condSeq = AthSequencer("AthCondSeq")
if hasattr(condSeq, "LArAutoCorrNoiseCondAlg"):
return getattr(condSeq, "LArAutoCorrNoiseCondAlg")
theAutoCorrNoiseCondAlg = LArAutoCorrNoiseCondAlg(
"LArAutoCorrNoiseCondAlg")
from LArROD.LArRODFlags import larRODFlags
theAutoCorrNoiseCondAlg.nSampl = larRODFlags.nSamples()
condSeq += theAutoCorrNoiseCondAlg
return theAutoCorrNoiseCondAlg
def configure(self):
from AthenaCommon.Logging import logging
mlog = logging.getLogger( 'LArNoisyROSummaryGetter::configure:' )
mlog.info ('entering')
# get handle to upstream CaloCell object
import traceback
try:
from CaloRec.CaloCellGetter import CaloCellGetter
theCaloCellGetter = CaloCellGetter()
except:
mlog.error("could not get handle to CaloCell Quit")
traceback.print_exc()
return False
if not theCaloCellGetter.usable():
if not self.ignoreConfigError():
mlog.error("CaloCellGetter unusable. Quit.")
return False
else:
mlog.error("CaloCellGetter unusable. Continue nevertheless")
LArOnOffIdMapping() # Set up cabling cond algo
# now configure the algorithm
# cannot have same name
try:
from LArCellRec.LArCellRecConf import LArNoisyROAlg,LArNoisyROTool
except:
mlog.error("could not import LArNoisyROAlg or LArNoisyROTool")
traceback.print_exc()
return False
theLArNoisyROTool=LArNoisyROTool(CellQualityCut=larNoisyROFlags.CellQualityCut(),
BadChanPerFEB=larNoisyROFlags.BadChanPerFEB(),
BadFEBCut=larNoisyROFlags.BadFEBCut(),
MNBLooseCut=larNoisyROFlags.MNBLooseCut(),
MNBTightCut=larNoisyROFlags.MNBTightCut(),
MNBTight_PsVetoCut=larNoisyROFlags.MNBTight_PsVetoCut()
)
theLArNoisyROAlg=LArNoisyROAlg()
theLArNoisyROAlg.Tool=theLArNoisyROTool
self._LArNoisyROMakerHandle = theLArNoisyROAlg
theLArNoisyROAlg.OutputKey=self.outputKey()
if globalflags.DataSource()=='geant4':
theLArNoisyROAlg.isMC = True
# register output in objKeyStore
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addStreamESD(self.outputType(),self.outputKey())
objKeyStore.addTransient(self.outputType(),self.outputKey())
# now add algorithm to topSequence
# this should always come at the end
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
topSequence += theLArNoisyROAlg
return True
DetFlags.digitize.all_setOff()
#DetFlags.Print()
#Set up GeoModel (not really needed but crashes without)
from AtlasGeoModel import SetGeometryVersion
from AtlasGeoModel import GeoModelInit
#Get identifier mapping
include("LArConditionsCommon/LArIdMap_comm_jobOptions.py")
include("LArIdCnv/LArIdCnv_joboptions.py")
include("ByteStreamCnvSvc/BSEventStorageEventSelector_jobOptions.py")
else:
include("LArConditionsCommon/LArMinimalSetup.py")
from LArCabling.LArCablingAccess import LArOnOffIdMapping, LArFebRodMapping, LArCalibIdMapping
LArOnOffIdMapping()
LArFebRodMapping()
LArCalibIdMapping()
if SuperCells:
from LArCabling.LArCablingAccess import LArOnOffIdMappingSC, LArCalibIdMappingSC
LArOnOffIdMappingSC()
LArCalibIdMappingSC()
svcMgr.IOVDbSvc.GlobalTag = LArCalib_Flags.globalFlagDB
svcMgr.IOVDbSvc.DBInstance = ""
from LArBadChannelTool.LArBadChannelAccess import LArBadChannelAccess
if 'InputDBConnectionBadChannel' not in dir():
InputDBConnectionBadChannel = "<db>COOLONL_LAR/CONDBR2</db>"
BadChannelsFolder = "/LAR/BadChannels/BadChannels"
def configure(self):
from AthenaCommon.Logging import logging
mlog = logging.getLogger('CaloCellGetter_DigiHSTruth::configure:')
mlog.info('entering')
doStandardCellReconstruction = True
from CaloRec.CaloCellFlags import jobproperties
# get handle to upstream object
# handle tile
if doStandardCellReconstruction:
from LArROD.LArRODFlags import larRODFlags
# now configure the algorithm, part of this could be done in a separate class
# cannot have same name
try:
from CaloRec.CaloRecConf import CaloCellMaker
except Exception:
mlog.error("could not import CaloRec.CaloCellMaker")
print(traceback.format_exc())
return False
theCaloCellMaker = CaloCellMaker("CaloCellMaker_DigiHSTruth")
self._CaloCellMakerHandle = theCaloCellMaker
from AthenaCommon.AppMgr import ToolSvc
if doStandardCellReconstruction:
# configure CaloCellMaker here
# check LArCellMakerTool_jobOptions.py for full configurability
# FIXME
if rec.doLArg():
from LArCabling.LArCablingAccess import LArOnOffIdMapping
LArOnOffIdMapping()
try:
from LArCellRec.LArCellRecConf import LArCellBuilderFromLArRawChannelTool
theLArCellBuilder = LArCellBuilderFromLArRawChannelTool(
"LArCellBuilder_DigiHSTruth")
theLArCellBuilder.RawChannelsName = "LArRawChannels_DigiHSTruth"
except Exception:
mlog.error(
"could not get handle to LArCellBuilderFromLArRawChannel Quit"
)
print(traceback.format_exc())
return False
if jobproperties.CaloCellFlags.doLArCreateMissingCells():
theLArCellBuilder.addDeadOTX = True
# add the tool to list of tool ( should use ToolHandle eventually)
theCaloCellMaker += theLArCellBuilder
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellBuilder]
if rec.doTile():
try:
from TileRecUtils.TileRecUtilsConf import TileCellBuilder
theTileCellBuilder = TileCellBuilder(
"TileCellBuilder_DigiHSTruth")
theTileCellBuilder.TileRawChannelContainer = "TileRawChannelCnt_DigiHSTruth"
theTileCellBuilder.E4prContainer = "E4prContainer2_DigiHSTruth"
theTileCellBuilder.MBTSContainer = "MBTSContainer2_DigiHSTruth"
theTileCellBuilder.TileDSPRawChannelContainer = "TileRawChannelCnt_DigiHSTruth"
theCaloCellMaker += theTileCellBuilder
theCaloCellMaker.CaloCellMakerToolNames += [
theTileCellBuilder
]
except Exception:
mlog.error("could not get handle to TileCellBuilder Quit")
print(traceback.format_exc())
return False
#
# CaloCellContainerFinalizerTool : closing container and setting up iterators
#
from CaloRec.CaloRecConf import CaloCellContainerFinalizerTool
theCaloCellContainerFinalizerTool = CaloCellContainerFinalizerTool(
"CaloCellContainerFinalizerTool_DigiHSTruth")
theCaloCellMaker += theCaloCellContainerFinalizerTool
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellContainerFinalizerTool
]
#
# Mergeing of calo cellcontainer with sparse raw channel container with improved energies
#
doLArMerge = False
if doLArMerge:
try:
from LArCellRec.LArCellRecConf import LArCellMerger
theLArCellMerger = LArCellMerger()
except Exception:
mlog.error("could not get handle to LArCellMerge Quit")
print(traceback.format_exc())
return False
theLArCellMerger.RawChannelsName = larRODFlags.RawChannelFromDigitsContainerName(
)
theCaloCellMaker += theLArCellMerger
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellMerger]
#
# masking of noisy and sporadic noisy cells in LAr
#
doNoiseMask = False
if jobproperties.CaloCellFlags.doLArNoiseMasking.statusOn and jobproperties.CaloCellFlags.doLArNoiseMasking(
):
doNoiseMask = True
doSporadicMask = False
if jobproperties.CaloCellFlags.doLArSporadicMasking.statusOn and jobproperties.CaloCellFlags.doLArSporadicMasking(
):
doSporadicMask = True
if doNoiseMask or doSporadicMask:
try:
from LArCellRec.LArCellRecConf import LArCellNoiseMaskingTool
theLArCellNoiseMaskingTool = LArCellNoiseMaskingTool()
except Exception:
mlog.error(
"could not get handle to LArCellNoiseMaskingTool Quit")
print(traceback.format_exc())
return False
if doSporadicMask:
try:
from LArBadChannelTool.LArBadChannelToolConf import LArBadChannelMasker
theLArSporadicNoiseMasker = LArBadChannelMasker(
"LArSporadicNoiseMasker")
except Exception:
mlog.error("could not access bad channel tool Quit")
print(traceback.format_exc())
return False
theLArSporadicNoiseMasker.DoMasking = True
theLArSporadicNoiseMasker.ProblemsToMask = [
"sporadicBurstNoise"
]
ToolSvc += theLArSporadicNoiseMasker
theLArCellNoiseMaskingTool.MaskingSporadicTool = theLArSporadicNoiseMasker
if doNoiseMask:
try:
from LArBadChannelTool.LArBadChannelToolConf import LArBadChannelMasker
theLArNoiseMasker = LArBadChannelMasker("LArNoiseMasker")
except Exception:
mlog.error("could not access bad channel tool Quit")
print(traceback.format_exc())
return False
theLArNoiseMasker.DoMasking = True
theLArNoiseMasker.ProblemsToMask = [
"highNoiseHG", "highNoiseMG", "highNoiseLG", "deadReadout",
"deadPhys"
]
ToolSvc += theLArNoiseMasker
theLArCellNoiseMaskingTool.MaskingTool = theLArNoiseMasker
theLArCellNoiseMaskingTool.maskNoise = doNoiseMask
theLArCellNoiseMaskingTool.maskSporadic = doSporadicMask
# quality cut for sporadic noise masking
theLArCellNoiseMaskingTool.qualityCut = 4000
theCaloCellMaker += theLArCellNoiseMaskingTool
theCaloCellMaker.CaloCellMakerToolNames += [
theLArCellNoiseMaskingTool
]
#
# masking of Feb problems
#
doBadFebMasking = False
if doBadFebMasking:
try:
from LArCellRec.LArCellRecConf import LArBadFebMaskingTool
theLArBadFebMaskingTool = LArBadFebMaskingTool()
if (
rec.doExpressProcessing()
or athenaCommonFlags.isOnline()
): # In online or express processing, EventInfo::LArError is triggered if >=4 FEB with data corrupted
theLArBadFebMaskingTool.minFebInError = 4
except Exception:
mlog.error("could not get handle to LArBadFebMaskingTool Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theLArBadFebMaskingTool
theCaloCellMaker.CaloCellMakerToolNames += [
theLArBadFebMaskingTool
]
#
# emulate gain pathologies on MC
#
doGainPathology = False
if jobproperties.CaloCellFlags.doLArCellGainPathology.statusOn and jobproperties.CaloCellFlags.doLArCellGainPathology(
):
if globalflags.DataSource() == 'geant4':
doGainPathology = True
if doGainPathology:
try:
from LArCellRec.LArCellRecConf import LArCellGainPathology
theLArCellGainPathology = LArCellGainPathology()
except Exception:
mlog.error("could not get handle to LArCellGainPatholog< Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theLArCellGainPathology
theCaloCellMaker.CaloCellMakerToolNames += [
theLArCellGainPathology
]
# lar miscalibration if MC only (should be done after finalisation)
if not jobproperties.CaloCellFlags.doLArCellEmMisCalib.statusOn:
# the flag has not been set, so decide a reasonable default
# this is the old global flags should use the new one as
# soon as monitoring does
doLArCellEmMisCalib = True
mlog.info(
"jobproperties.CaloCellFlags.doLArMisCalib not set and Monte Carlo: apply LArCellEmMisCalibTool"
)
else:
doLArCellEmMisCalib = jobproperties.CaloCellFlags.doLArCellEmMisCalib(
)
if doLArCellEmMisCalib:
mlog.info("LArCellEmMisCalibTool requested")
else:
mlog.info("LArCellEmMisCalibTool explicitly not requested")
if doLArCellEmMisCalib:
try:
from LArCellRec.LArCellRecConf import LArCellEmMiscalib
theLArCellEmMiscalib = LArCellEmMiscalib("LArCellEmMiscalib")
except Exception:
mlog.error("could not get handle to LArCellEmMisCalib Quit")
print(traceback.format_exc())
return False
# examples on how to change miscalibration. Default values are 0.005 and 0.007
# theLArCellEmMiscalib.SigmaPerRegion = 0.005
# theLArCellEmMiscalib.SigmaPerCell = 0.005
ToolSvc += theLArCellEmMiscalib
try:
from CaloRec.CaloRecConf import CaloCellContainerCorrectorTool
from CaloIdentifier import SUBCALO
theMisCalibTool = CaloCellContainerCorrectorTool(
"MisCalibTool",
CaloNums=[SUBCALO.LAREM],
CellCorrectionToolNames=[theLArCellEmMiscalib])
except Exception:
mlog.error("could not get handle to MisCalibTool Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theMisCalibTool
theCaloCellMaker.CaloCellMakerToolNames += [theMisCalibTool]
#
# Pedestal shift correction
#
doPedestalCorr = False
if jobproperties.CaloCellFlags.doPedestalCorr.statusOn:
if jobproperties.CaloCellFlags.doPedestalCorr() and (
jobproperties.CaloCellFlags.doPileupOffsetBCIDCorr):
doPedestalCorr = True
mlog.info("Apply cell level pedestal shift correction")
if doPedestalCorr:
try:
from CaloCellCorrection.CaloCellPedestalCorrDefault import CaloCellPedestalCorrDefault
theCaloCellPedestalCorr = CaloCellPedestalCorrDefault()
theCaloCellMaker += theCaloCellPedestalCorr
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellPedestalCorr
]
except Exception:
mlog.error("could not get handle to CaloCellPedestalCorr")
print(traceback.format_exc())
#
# Correction for MinBias energy shift for MC pileup reco
#
doMinBiasAverage = False
if jobproperties.CaloCellFlags.doMinBiasAverage.statusOn:
from AthenaCommon.BeamFlags import jobproperties
if jobproperties.CaloCellFlags.doMinBiasAverage(
) and globalflags.DataSource() == 'geant4' and (
not jobproperties.Beam.zeroLuminosity()):
doMinBiasAverage = True
if doMinBiasAverage:
try:
from CaloTools.CaloMBAverageToolDefault import CaloMBAverageToolDefault
theCaloMBAverageTool = CaloMBAverageToolDefault()
except Exception:
mlog.error("could not get handle to CaloMBAverageTool Quit")
print(traceback.format_exc())
return False
ToolSvc += theCaloMBAverageTool
try:
from CaloCellCorrection.CaloCellCorrectionConf import CaloCellMBAverageCorr
theCaloCellMBAverageCorr = CaloCellMBAverageCorr(
"CaloCellMBAverageCorr")
theCaloCellMBAverageCorr.CaloMBAverageTool = theCaloMBAverageTool
except Exception:
mlog.error(
"could not get handle to CaloCellMBAverageCorr Quit")
print(traceback.format_exc())
return False
ToolSvc += theCaloCellMBAverageCorr
try:
from CaloRec.CaloRecConf import CaloCellContainerCorrectorTool
from CaloIdentifier import SUBCALO
theMBAverageTool = CaloCellContainerCorrectorTool(
"MBAverageTool",
CaloNums=[SUBCALO.NSUBCALO],
CellCorrectionToolNames=[theCaloCellMBAverageCorr])
except Exception:
mlog.error(
"could not get handle to CaloCellContainerCorrectorTool/MBAverageTool Quit"
)
print(traceback.format_exc())
return False
theCaloCellMaker += theMBAverageTool
theCaloCellMaker.CaloCellMakerToolNames += [theMBAverageTool]
#
# Correction for dead cells, where we average the energy density of neighbor cells
#
doNeighborsAverage = False
if jobproperties.CaloCellFlags.doDeadCellCorr.statusOn:
if jobproperties.CaloCellFlags.doDeadCellCorr():
doNeighborsAverage = True
if doNeighborsAverage:
try:
from CaloCellCorrection.CaloCellCorrectionConf import CaloCellNeighborsAverageCorr
theCaloCellNeighborsAverageCorr = CaloCellNeighborsAverageCorr(
"CaloCellNeighborsAverageCorr")
theCaloCellNeighborsAverageCorr.testMode = False
except Exception:
mlog.error(
"could not get handle to CaloCellNeighborsAverageCorr Quit"
)
print(traceback.format_exc())
return False
theCaloCellMaker += theCaloCellNeighborsAverageCorr
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellNeighborsAverageCorr
]
#
# correction for missing Febs based on L1 readout
doLArDeadOTXCorr = False
if jobproperties.CaloCellFlags.doLArDeadOTXCorr.statusOn and jobproperties.CaloCellFlags.doLArCreateMissingCells.statusOn:
if jobproperties.CaloCellFlags.doLArDeadOTXCorr(
) and jobproperties.CaloCellFlags.doLArCreateMissingCells(
) and doStandardCellReconstruction:
if rec.doTrigger():
doLArDeadOTXCorr = True
else:
mlog.warning(
"Trigger is switched off. Can't run deadOTX correction."
)
if doLArDeadOTXCorr:
try:
from LArCellRec.LArCellDeadOTXCorrToolDefault import LArCellDeadOTXCorrToolDefault
theLArCellDeadOTXCorr = LArCellDeadOTXCorrToolDefault()
except Exception:
mlog.error("could not get handle to LArCellDeadOTXCorr Quit")
print(traceback.format_exc())
theCaloCellMaker += theLArCellDeadOTXCorr
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellDeadOTXCorr]
# make lots of checks (should not be necessary eventually)
# to print the check add:
from CaloRec.CaloRecConf import CaloCellContainerCheckerTool
theCaloCellContainerCheckerTool = CaloCellContainerCheckerTool()
# FIXME
# theCaloCellContainerCheckerTool.OutputLevel=DEBUG
theCaloCellMaker += theCaloCellContainerCheckerTool
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellContainerCheckerTool
]
# sets output key
theCaloCellMaker.CaloCellsOutputName = self.outputKey()
# register output in objKeyStore
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addStreamESD(self.outputType(), self.outputKey())
# Also note that we produce it as a transient output.
objKeyStore.addTransient(self.outputType(), self.outputKey())
from TileRecUtils.TileDQstatusAlgDefault import TileDQstatusAlgDefault
TileDQstatusAlgDefault()
# now add algorithm to topSequence
# this should always come at the end
mlog.info(" now adding CaloCellMaker to topSequence")
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
topSequence += theCaloCellMaker
return True
def configure(self):
from AthenaCommon.Logging import logging
mlog = logging.getLogger('CaloCellGetter::configure:')
mlog.info('entering')
doStandardCellReconstruction = True
from CaloRec.CaloCellFlags import jobproperties
from AthenaCommon.AppMgr import ToolSvc
if not jobproperties.CaloCellFlags.doFastCaloSim.statusOn:
doFastCaloSim = False
mlog.info("doFastCaloSim not set, so not using it")
else:
doFastCaloSim = jobproperties.CaloCellFlags.doFastCaloSim()
if doFastCaloSim:
mlog.info("doFastCaloSim requested")
doStandardCellReconstruction = False
if jobproperties.CaloCellFlags.doFastCaloSimAddCells():
doStandardCellReconstruction = True
mlog.info(
"doFastCaloSimAddCells requested: FastCaloSim is added to fullsim calorimeter"
)
else:
mlog.info(
"doFastCaloSimAddCells not requested: Stand alone FastCaloSim is running"
)
else:
mlog.info("doFastCaloSim explicitly not requested")
# get handle to upstream object
# handle tile
if doStandardCellReconstruction:
from LArROD.LArRODFlags import larRODFlags
from AthenaCommon.GlobalFlags import globalflags
if larRODFlags.readDigits() and globalflags.DataSource() == 'data':
from LArROD.LArRawChannelBuilderDefault import LArRawChannelBuilderDefault
LArRawChannelBuilderDefault()
# writing of thinned digits
if jobproperties.CaloCellFlags.doLArThinnedDigits.statusOn and jobproperties.CaloCellFlags.doLArThinnedDigits(
):
from AthenaCommon.GlobalFlags import globalflags
if globalflags.DataSource() == 'data':
try:
from LArROD.LArDigits import DefaultLArDigitThinner
LArDigitThinner = DefaultLArDigitThinner(
'LArDigitThinner'
) # automatically added to topSequence
LArDigitThinner.InputContainerName = "FREE"
LArDigitThinner.OutputContainerName = "LArDigitContainer_Thinned"
except Exception:
treatException("Problem with LArDigitThinner ")
# now configure the algorithm, part of this could be done in a separate class
# cannot have same name
try:
from CaloRec.CaloRecConf import CaloCellMaker
except Exception:
mlog.error("could not import CaloRec.CaloCellMaker")
print(traceback.format_exc())
return False
theCaloCellMaker = CaloCellMaker()
self._CaloCellMakerHandle = theCaloCellMaker
if doStandardCellReconstruction:
# configure CaloCellMaker here
# check LArCellMakerTool_jobOptions.py for full configurability
# FIXME
if rec.doLArg():
from LArCabling.LArCablingAccess import LArOnOffIdMapping
LArOnOffIdMapping()
try:
from LArCellRec.LArCellRecConf import LArCellBuilderFromLArRawChannelTool
theLArCellBuilder = LArCellBuilderFromLArRawChannelTool()
except Exception:
mlog.error(
"could not get handle to LArCellBuilderFromLArRawChannel Quit"
)
print(traceback.format_exc())
return False
if jobproperties.CaloCellFlags.doLArCreateMissingCells():
theLArCellBuilder.addDeadOTX = True
# add the tool to list of tool ( should use ToolHandle eventually)
theCaloCellMaker += theLArCellBuilder
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellBuilder]
if rec.doTile():
from AthenaCommon.GlobalFlags import globalflags
if globalflags.DataSource(
) == 'data' and globalflags.InputFormat() == 'bytestream':
try:
svcMgr.ByteStreamCnvSvc.ROD2ROBmap = ["-1"]
if "TileDigitsContainer/TileDigitsCnt" not in svcMgr.ByteStreamAddressProviderSvc.TypeNames:
svcMgr.ByteStreamAddressProviderSvc.TypeNames += [
"TileBeamElemContainer/TileBeamElemCnt",
"TileDigitsContainer/TileDigitsCnt",
"TileL2Container/TileL2Cnt",
"TileLaserObject/TileLaserObj",
"TileMuonReceiverContainer/TileMuRcvCnt"
]
except Exception:
mlog.warning(
"Cannot add TileDigitsContainer/TileDigitsCnt et al. to bytestream list"
)
# set options for TileRawChannelMaker
from TileRecUtils.TileRecFlags import jobproperties
jobproperties.TileRecFlags.TileRunType = 1 # physics run type
# reading of digits can be disabled before calling CaloCellGetter
# if this is not done, but digits are not available in BS file
# reading of digits is automatically disabled at start of run
if jobproperties.TileRecFlags.readDigits() \
and not (jobproperties.TileRecFlags.doTileFlat \
or jobproperties.TileRecFlags.doTileFit \
or jobproperties.TileRecFlags.doTileFitCool \
or jobproperties.TileRecFlags.doTileOF1 \
or jobproperties.TileRecFlags.doTileOpt2 \
or jobproperties.TileRecFlags.doTileOptATLAS \
or jobproperties.TileRecFlags.doTileMF):
from AthenaCommon.BeamFlags import jobproperties
# run Opt filter with iterations by default, both for cosmics and collisions before 2011
# run Opt filter without iterations for collisions in 2011 and later
if 'doTileOpt2' not in dir():
from RecExConfig.AutoConfiguration import GetRunNumber
rn = GetRunNumber()
if not athenaCommonFlags.isOnline(
) and rn > 0 and rn < 171194:
doTileOpt2 = True
elif jobproperties.Beam.beamType() == 'collisions':
doTileOpt2 = False # use OF without iterations for collisions
else:
doTileOpt2 = True # always run OF with iterations for cosmics
# jobproperties.TileRecFlags.calibrateEnergy=True # use pCb for RawChannels
# please, note that time correction and best phase are used only for collisions
if doTileOpt2:
jobproperties.TileRecFlags.doTileOpt2 = True # run optimal filter with iterations
jobproperties.TileRecFlags.doTileOptATLAS = False # disable optimal filter without iterations
jobproperties.TileRecFlags.correctAmplitude = False # don't do parabolic correction
if jobproperties.Beam.beamType() == 'collisions':
jobproperties.TileRecFlags.correctTime = True # apply time correction in physics runs
jobproperties.TileRecFlags.BestPhaseFromCOOL = False # best phase is not needed for iterations
else:
jobproperties.TileRecFlags.doTileOpt2 = False # disable optimal filter with iterations
jobproperties.TileRecFlags.doTileOptATLAS = True # run optimal filter without iterations
jobproperties.TileRecFlags.correctAmplitude = True # apply parabolic correction
if jobproperties.Beam.beamType() == 'collisions':
jobproperties.TileRecFlags.correctTime = False # don't need time correction if best phase is used
jobproperties.TileRecFlags.BestPhaseFromCOOL = True # use best phase stored in DB
try:
from TileRecUtils.TileRawChannelGetter import TileRawChannelGetter
theTileRawChannelGetter = TileRawChannelGetter(
) # noqa: F841
except Exception:
mlog.error("could not load TileRawChannelGetter Quit")
print(traceback.format_exc())
return False
try:
from TileRecAlgs.TileRecAlgsConf import TileDigitsFilter
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
topSequence += TileDigitsFilter()
except Exception:
mlog.error("Could not configure TileDigitsFilter")
from AthenaCommon.AlgSequence import AthSequencer
condSequence = AthSequencer("AthCondSeq")
checkDCS = hasattr(condSequence, 'TileDCSCondAlg')
try:
from TileRecUtils.TileRecUtilsConf import TileCellBuilder
theTileCellBuilder = TileCellBuilder(CheckDCS=checkDCS)
from TileRecUtils.TileRecFlags import jobproperties
theTileCellBuilder.TileRawChannelContainer = jobproperties.TileRecFlags.TileRawChannelContainer(
)
if (jobproperties.TileRecFlags.noiseFilter() == 1
and jobproperties.TileRecFlags.readDigits()
and globalflags.DataSource() == 'data'
and not globalflags.isOverlay()):
theTileCellBuilder.TileDSPRawChannelContainer = 'TileRawChannelCntCorrected'
rawChannelContainer = ''
if globalflags.DataSource(
) == 'data' and globalflags.InputFormat() == 'bytestream':
if jobproperties.TileRecFlags.readDigits():
# everything is already corrected at RawChannel level
theTileCellBuilder.correctTime = False
theTileCellBuilder.correctAmplitude = False
else:
rawChannelContainer = 'TileRawChannelCnt'
# by default parameters are tuned for opt.filter without iterations
theTileCellBuilder.correctTime = jobproperties.TileRecFlags.correctTime(
)
theTileCellBuilder.correctAmplitude = jobproperties.TileRecFlags.correctAmplitude(
)
theTileCellBuilder.AmpMinForAmpCorrection = jobproperties.TileRecFlags.AmpMinForAmpCorrection(
)
if jobproperties.TileRecFlags.TimeMaxForAmpCorrection(
) <= jobproperties.TileRecFlags.TimeMinForAmpCorrection(
):
from AthenaCommon.BeamFlags import jobproperties
mlog.info(
"adjusting min/max time of parabolic correction for %s",
jobproperties.Beam.bunchSpacing)
halfBS = jobproperties.Beam.bunchSpacing.get_Value(
) / 2.
jobproperties.TileRecFlags.TimeMinForAmpCorrection = -halfBS
jobproperties.TileRecFlags.TimeMaxForAmpCorrection = halfBS
if jobproperties.TileRecFlags.TimeMaxForAmpCorrection(
) > jobproperties.TileRecFlags.TimeMinForAmpCorrection(
):
theTileCellBuilder.TimeMinForAmpCorrection = jobproperties.TileRecFlags.TimeMinForAmpCorrection(
)
theTileCellBuilder.TimeMaxForAmpCorrection = jobproperties.TileRecFlags.TimeMaxForAmpCorrection(
)
theCaloCellMaker += theTileCellBuilder
theCaloCellMaker.CaloCellMakerToolNames += [
theTileCellBuilder
]
except Exception:
mlog.error("could not get handle to TileCellBuilder Quit")
print(traceback.format_exc())
return False
if doFastCaloSim:
mlog.info('configuring FastCaloSim here')
try:
from FastCaloSim.FastCaloSimConf import EmptyCellBuilderTool
theEmptyCellBuilderTool = EmptyCellBuilderTool()
theCaloCellMaker += theEmptyCellBuilderTool
theCaloCellMaker.CaloCellMakerToolNames += [
theEmptyCellBuilderTool
]
print(theEmptyCellBuilderTool)
mlog.info("configure EmptyCellBuilderTool worked")
except Exception:
mlog.error("could not get handle to EmptyCellBuilderTool Quit")
print(traceback.format_exc())
return False
try:
from FastCaloSim.FastCaloSimFactory import FastCaloSimFactory
theFastShowerCellBuilderTool = FastCaloSimFactory()
theCaloCellMaker += theFastShowerCellBuilderTool
theCaloCellMaker.CaloCellMakerToolNames += [
theFastShowerCellBuilderTool
]
mlog.info("configure FastShowerCellBuilderTool worked")
except Exception:
mlog.error(
"could not get handle to FastShowerCellBuilderTool Quit")
print(traceback.format_exc())
return False
doFastCaloSimNoise = jobproperties.CaloCellFlags.doFastCaloSimNoise(
)
if doFastCaloSimNoise:
try:
from FastCaloSim.AddNoiseCellBuilderToolDefault import AddNoiseCellBuilderToolDefault
theAddNoiseCellBuilderTool = AddNoiseCellBuilderToolDefault(
)
print(theAddNoiseCellBuilderTool)
theCaloCellMaker += theAddNoiseCellBuilderTool
theCaloCellMaker.CaloCellMakerToolNames += [
theAddNoiseCellBuilderTool
]
mlog.info("configure AddNoiseCellBuilderTool worked")
except Exception:
mlog.error(
"could not get handle to AddNoiseCellBuilderTool Quit")
print(traceback.format_exc())
return False
#
# CaloCellContainerFinalizerTool : closing container and setting up iterators
#
from CaloRec.CaloRecConf import CaloCellContainerFinalizerTool
theCaloCellContainerFinalizerTool = CaloCellContainerFinalizerTool()
theCaloCellMaker += theCaloCellContainerFinalizerTool
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellContainerFinalizerTool
]
#
# Mergeing of calo cellcontainer with sparse raw channel container with improved energies
#
doLArMerge = False
if globalflags.DataSource(
) == 'data' and jobproperties.CaloCellFlags.doLArRawChannelMerge.statusOn and jobproperties.CaloCellFlags.doLArRawChannelMerge(
):
from LArROD.LArRODFlags import larRODFlags
if larRODFlags.readDigits() and larRODFlags.keepDSPRaw():
doLArMerge = True
if doLArMerge:
try:
from LArCellRec.LArCellRecConf import LArCellMerger
theLArCellMerger = LArCellMerger()
except Exception:
mlog.error("could not get handle to LArCellMerge Quit")
print(traceback.format_exc())
return False
theLArCellMerger.RawChannelsName = larRODFlags.RawChannelFromDigitsContainerName(
)
theCaloCellMaker += theLArCellMerger
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellMerger]
#
# masking of noisy and sporadic noisy cells in LAr
#
doNoiseMask = False
if jobproperties.CaloCellFlags.doLArNoiseMasking.statusOn and jobproperties.CaloCellFlags.doLArNoiseMasking(
):
doNoiseMask = True
doSporadicMask = False
if jobproperties.CaloCellFlags.doLArSporadicMasking.statusOn and jobproperties.CaloCellFlags.doLArSporadicMasking(
):
doSporadicMask = True
if doNoiseMask or doSporadicMask:
try:
from LArCellRec.LArCellRecConf import LArCellNoiseMaskingTool
theLArCellNoiseMaskingTool = LArCellNoiseMaskingTool()
except Exception:
mlog.error(
"could not get handle to LArCellNoiseMaskingTool Quit")
print(traceback.format_exc())
return False
if doSporadicMask:
try:
from LArBadChannelTool.LArBadChannelToolConf import LArBadChannelMasker
theLArSporadicNoiseMasker = LArBadChannelMasker(
"LArSporadicNoiseMasker")
except Exception:
mlog.error("could not access bad channel tool Quit")
print(traceback.format_exc())
return False
theLArSporadicNoiseMasker.DoMasking = True
theLArSporadicNoiseMasker.ProblemsToMask = [
"sporadicBurstNoise"
]
#ToolSvc += theLArSporadicNoiseMasker
theLArCellNoiseMaskingTool.MaskingSporadicTool = theLArSporadicNoiseMasker
if doNoiseMask:
try:
from LArBadChannelTool.LArBadChannelToolConf import LArBadChannelMasker
theLArNoiseMasker = LArBadChannelMasker("LArNoiseMasker")
except Exception:
mlog.error("could not access bad channel tool Quit")
print(traceback.format_exc())
return False
theLArNoiseMasker.DoMasking = True
theLArNoiseMasker.ProblemsToMask = [
"highNoiseHG", "highNoiseMG", "highNoiseLG", "deadReadout",
"deadPhys"
]
#ToolSvc+=theLArNoiseMasker
theLArCellNoiseMaskingTool.MaskingTool = theLArNoiseMasker
theLArCellNoiseMaskingTool.maskNoise = doNoiseMask
theLArCellNoiseMaskingTool.maskSporadic = doSporadicMask
# quality cut for sporadic noise masking
theLArCellNoiseMaskingTool.qualityCut = 4000
theCaloCellMaker += theLArCellNoiseMaskingTool
theCaloCellMaker.CaloCellMakerToolNames += [
theLArCellNoiseMaskingTool
]
#
# masking of Feb problems
#
doBadFebMasking = False
if jobproperties.CaloCellFlags.doLArBadFebMasking.statusOn and jobproperties.CaloCellFlags.doLArBadFebMasking(
):
from AthenaCommon.GlobalFlags import globalflags
if globalflags.DataSource() == 'data':
doBadFebMasking = True
if doBadFebMasking:
try:
from LArCellRec.LArCellRecConf import LArBadFebMaskingTool
theLArBadFebMaskingTool = LArBadFebMaskingTool()
if (
rec.doExpressProcessing()
or athenaCommonFlags.isOnline()
): # In online or express processing, EventInfo::LArError is triggered if >=4 FEB with data corrupted
theLArBadFebMaskingTool.minFebInError = 4
except Exception:
mlog.error("could not get handle to LArBadFebMaskingTool Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theLArBadFebMaskingTool
theCaloCellMaker.CaloCellMakerToolNames += [
theLArBadFebMaskingTool
]
#
# emulate gain pathologies on MC
#
doGainPathology = False
if jobproperties.CaloCellFlags.doLArCellGainPathology.statusOn and jobproperties.CaloCellFlags.doLArCellGainPathology(
):
from AthenaCommon.GlobalFlags import globalflags
if globalflags.DataSource() == 'geant4':
doGainPathology = True
if doGainPathology:
try:
from LArCellRec.LArCellRecConf import LArCellGainPathology
theLArCellGainPathology = LArCellGainPathology()
except Exception:
mlog.error("could not get handle to LArCellGainPatholog< Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theLArCellGainPathology
theCaloCellMaker.CaloCellMakerToolNames += [
theLArCellGainPathology
]
# lar miscalibration if MC only (should be done after finalisation)
if not jobproperties.CaloCellFlags.doLArCellEmMisCalib.statusOn:
# the flag has not been set, so decide a reasonable default
# this is the old global flags should use the new one as
# soon as monitoring does
from AthenaCommon.GlobalFlags import globalflags
if globalflags.DataSource() == 'data':
doLArCellEmMisCalib = False
mlog.info(
"jobproperties.CaloCellFlags.doLArMisCalib not set and real data: do not apply LArCellEmMisCalibTool"
)
else:
doLArCellEmMisCalib = True
mlog.info(
"jobproperties.CaloCellFlags.doLArMisCalib not set and Monte Carlo: apply LArCellEmMisCalibTool"
)
else:
doLArCellEmMisCalib = jobproperties.CaloCellFlags.doLArCellEmMisCalib(
)
if doLArCellEmMisCalib:
mlog.info("LArCellEmMisCalibTool requested")
else:
mlog.info("LArCellEmMisCalibTool explicitly not requested")
if doLArCellEmMisCalib:
try:
from LArCellRec.LArCellRecConf import LArCellEmMiscalib
theLArCellEmMiscalib = LArCellEmMiscalib("LArCellEmMiscalib")
except Exception:
mlog.error("could not get handle to LArCellEmMisCalib Quit")
print(traceback.format_exc())
return False
# examples on how to change miscalibration. Default values are 0.005 and 0.007
# theLArCellEmMiscalib.SigmaPerRegion = 0.005
# theLArCellEmMiscalib.SigmaPerCell = 0.005
try:
from CaloRec.CaloRecConf import CaloCellContainerCorrectorTool
from CaloIdentifier import SUBCALO
theMisCalibTool = CaloCellContainerCorrectorTool(
"MisCalibTool",
CaloNums=[SUBCALO.LAREM],
CellCorrectionToolNames=[theLArCellEmMiscalib])
except Exception:
mlog.error("could not get handle to MisCalibTool Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theMisCalibTool
theCaloCellMaker.CaloCellMakerToolNames += [theMisCalibTool]
#
# Pedestal shift correction
#
doPedestalCorr = False
if jobproperties.CaloCellFlags.doPedestalCorr.statusOn:
from AthenaCommon.GlobalFlags import globalflags
if jobproperties.CaloCellFlags.doPedestalCorr() and (
globalflags.DataSource() == 'data'
or jobproperties.CaloCellFlags.doPileupOffsetBCIDCorr):
doPedestalCorr = True
mlog.info("Apply cell level pedestal shift correction")
if doPedestalCorr:
try:
from CaloCellCorrection.CaloCellPedestalCorrDefault import CaloCellPedestalCorrDefault
theCaloCellPedestalCorr = CaloCellPedestalCorrDefault()
theCaloCellMaker += theCaloCellPedestalCorr
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellPedestalCorr
]
except Exception:
mlog.error("could not get handle to CaloCellPedestalCorr")
print(traceback.format_exc())
#
# HV correction for offline reprocessing, reading HV from Cool-DCS database
#
doHVCorr = False
from AthenaCommon.DetFlags import DetFlags
if DetFlags.dcs.LAr_on():
if jobproperties.CaloCellFlags.doLArHVCorr.statusOn:
from AthenaCommon.GlobalFlags import globalflags
if jobproperties.CaloCellFlags.doLArHVCorr(
) and globalflags.DataSource() == 'data':
doHVCorr = True
mlog.info(
"Redoing HV correction at cell level from COOL/DCS database"
)
if doHVCorr:
from LArCellRec.LArCellRecConf import LArCellContHVCorrTool
theLArCellHVCorrTool = LArCellContHVCorrTool()
#theCaloCellMaker += theHVCorrTool
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellHVCorrTool]
#
# correction to undo online calibration and apply new LAr electronics calibration for ADC->MeV conversion
#
doLArRecalibration = False
if jobproperties.CaloCellFlags.doLArRecalibration.statusOn:
from AthenaCommon.GlobalFlags import globalflags
from LArConditionsCommon.LArCondFlags import larCondFlags
if jobproperties.CaloCellFlags.doLArRecalibration(
) and globalflags.DataSource() == 'data' and (
not larCondFlags.SingleVersion()):
doLArRecalibration = True
mlog.info("Redoing LAr electronics calibration for ADC->MeV")
if doLArRecalibration:
# get tool for cell recalibration
try:
from LArCellRec.LArCellRecConf import LArCellRecalibration
theLArCellRecalibration = LArCellRecalibration(
"LArCellRecalibration")
except Exception:
mlog.error("could not get handle to LArCellRecalibration Quit")
print(traceback.format_exc())
return False
# get new ADC2MeVTool
try:
from LArRecUtils.LArADC2MeVToolDefault import LArADC2MeVToolDefault
theLArADC2MeVToolDefault = LArADC2MeVToolDefault()
except Exception:
mlog.error(
"Could not get handle to LArADC2MeVToolDefault Quit")
print(traceback.format_exc())
return False
ToolSvc += theLArADC2MeVToolDefault
# get old ADC2MeVTool
try:
from LArRecUtils.LArADC2MeVToolOnline import LArADC2MeVToolOnline
theLArADC2MeVToolOnline = LArADC2MeVToolOnline()
except Exception:
mlog.error("Could not get handle to LArADC2MeVToolOnline Quit")
print(traceback.format_exc())
return False
ToolSvc += theLArADC2MeVToolOnline
theLArCellRecalibration.adc2MeVTool = theLArADC2MeVToolDefault
theLArCellRecalibration.adc2MeVToolOnline = theLArADC2MeVToolOnline
try:
from CaloRec.CaloRecConf import CaloCellContainerCorrectorTool
from CaloIdentifier import SUBCALO
theLArRecalibrationTool = CaloCellContainerCorrectorTool(
"LArRecalibrationTool",
CaloNums=[SUBCALO.LAREM, SUBCALO.LARHEC, SUBCALO.LARFCAL],
CellCorrectionToolNames=[theLArCellRecalibration])
except Exception:
mlog.error("could not get handle to HVCorrTool Quit")
print(traceback.format_exc())
return False
theCaloCellMaker += theLArRecalibrationTool
theCaloCellMaker.CaloCellMakerToolNames += [
theLArRecalibrationTool
]
#
# Correction for MinBias energy shift for MC pileup reco
#
doMinBiasAverage = False
if jobproperties.CaloCellFlags.doMinBiasAverage.statusOn:
from AthenaCommon.GlobalFlags import globalflags
from AthenaCommon.BeamFlags import jobproperties
if jobproperties.CaloCellFlags.doMinBiasAverage(
) and globalflags.DataSource() == 'geant4' and (
not jobproperties.Beam.zeroLuminosity()):
doMinBiasAverage = True
if doMinBiasAverage:
try:
from CaloTools.CaloMBAverageToolDefault import CaloMBAverageToolDefault
theCaloMBAverageTool = CaloMBAverageToolDefault()
except Exception:
mlog.error("could not get handle to CaloMBAverageTool Quit")
print(traceback.format_exc())
return False
ToolSvc += theCaloMBAverageTool
try:
from CaloCellCorrection.CaloCellCorrectionConf import CaloCellMBAverageCorr
theCaloCellMBAverageCorr = CaloCellMBAverageCorr(
"CaloCellMBAverageCorr")
theCaloCellMBAverageCorr.CaloMBAverageTool = theCaloMBAverageTool
except Exception:
mlog.error(
"could not get handle to CaloCellMBAverageCorr Quit")
print(traceback.format_exc())
return False
try:
from CaloRec.CaloRecConf import CaloCellContainerCorrectorTool
from CaloIdentifier import SUBCALO
theMBAverageTool = CaloCellContainerCorrectorTool(
"MBAverageTool",
CaloNums=[SUBCALO.NSUBCALO],
CellCorrectionToolNames=[theCaloCellMBAverageCorr])
except Exception:
mlog.error(
"could not get handle to CaloCellContainerCorrectorTool/MBAverageTool Quit"
)
print(traceback.format_exc())
return False
theCaloCellMaker += theMBAverageTool
theCaloCellMaker.CaloCellMakerToolNames += [theMBAverageTool]
#
# Correction for dead cells, where we average the energy density of neighbor cells
#
doNeighborsAverage = False
if jobproperties.CaloCellFlags.doDeadCellCorr.statusOn:
if jobproperties.CaloCellFlags.doDeadCellCorr():
doNeighborsAverage = True
if doNeighborsAverage:
try:
from CaloCellCorrection.CaloCellCorrectionConf import CaloCellNeighborsAverageCorr
theCaloCellNeighborsAverageCorr = CaloCellNeighborsAverageCorr(
"CaloCellNeighborsAverageCorr")
theCaloCellNeighborsAverageCorr.testMode = False
except Exception:
mlog.error(
"could not get handle to CaloCellNeighborsAverageCorr Quit"
)
print(traceback.format_exc())
return False
theCaloCellMaker += theCaloCellNeighborsAverageCorr
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellNeighborsAverageCorr
]
#
# correction for missing Febs based on L1 readout
doLArDeadOTXCorr = False
if jobproperties.CaloCellFlags.doLArDeadOTXCorr.statusOn and jobproperties.CaloCellFlags.doLArCreateMissingCells.statusOn:
if jobproperties.CaloCellFlags.doLArDeadOTXCorr(
) and jobproperties.CaloCellFlags.doLArCreateMissingCells(
) and doStandardCellReconstruction:
if rec.doTrigger():
doLArDeadOTXCorr = True
else:
if globalflags.DataSource.get_Value(
) != 'geant4': #warning only if not MC
mlog.warning(
"Trigger is switched off. Can't run deadOTX correction."
)
if doLArDeadOTXCorr:
try:
from LArCellRec.LArCellDeadOTXCorrToolDefault import LArCellDeadOTXCorrToolDefault
theLArCellDeadOTXCorr = LArCellDeadOTXCorrToolDefault()
except Exception:
mlog.error("could not get handle to LArCellDeadOTXCorr Quit")
print(traceback.format_exc())
theCaloCellMaker += theLArCellDeadOTXCorr
theCaloCellMaker.CaloCellMakerToolNames += [theLArCellDeadOTXCorr]
if jobproperties.CaloCellFlags.doCaloCellEnergyCorr(
) and globalflags.DataSource(
) == 'data' and not athenaCommonFlags.isOnline():
try:
from CaloCellCorrection.CaloCellCorrectionConf import CaloCellEnergyRescaler
theCCERescalerTool = CaloCellEnergyRescaler()
theCCERescalerTool.Folder = "/LAR/CellCorrOfl/EnergyCorr"
from IOVDbSvc.CondDB import conddb
# conddb.addFolder("","/LAR/CellCorrOfl/EnergyCorr<tag>EnergyScale-00</tag><db>sqlite://;schema=escale.db;dbname=COMP200</db>")
conddb.addFolder("LAR_OFL",
"/LAR/CellCorrOfl/EnergyCorr",
className="AthenaAttributeList")
theCaloCellMaker += theCCERescalerTool
theCaloCellMaker.CaloCellMakerToolNames += [theCCERescalerTool]
except Exception:
mlog.error(
"could not get handle to CaloCellEnergyRescaler Quit")
print(traceback.format_exc())
return False
pass
if jobproperties.CaloCellFlags.doCaloCellTimeCorr(
) and globalflags.DataSource(
) == 'data' and not athenaCommonFlags.isOnline():
try:
from CaloCellCorrection.CaloCellCorrectionConf import CaloCellTimeCorrTool
theLArTimeCorr = CaloCellTimeCorrTool()
theLArTimeCorr.Folder = "/LAR/TimeCorrectionOfl/CellTimeOffset"
from IOVDbSvc.CondDB import conddb
# conddb.addFolder("","/LAR/TimeCorrectionOfl/CellTimeOffset<tag>LARTimeCorrectionOflCellTimeOffset-empty</tag><db>sqlite://;schema=timecorr.db;dbname=COMP200</db>")
conddb.addFolder("LAR_OFL",
"/LAR/TimeCorrectionOfl/CellTimeOffset",
className="AthenaAttributeList")
theCaloCellMaker.CaloCellMakerToolNames += [theLArTimeCorr]
except Exception:
mlog.error("could not get handle to CaloCellTimeCorrTool Quit")
print(traceback.format_exc())
return False
pass
# make lots of checks (should not be necessary eventually)
# to print the check add:
from CaloRec.CaloRecConf import CaloCellContainerCheckerTool
theCaloCellContainerCheckerTool = CaloCellContainerCheckerTool()
# FIXME
# theCaloCellContainerCheckerTool.OutputLevel=DEBUG
theCaloCellMaker += theCaloCellContainerCheckerTool
theCaloCellMaker.CaloCellMakerToolNames += [
theCaloCellContainerCheckerTool
]
#
# sets output key
theCaloCellMaker.CaloCellsOutputName = self.outputKey()
# register output in objKeyStore
from RecExConfig.ObjKeyStore import objKeyStore
objKeyStore.addStreamESD(self.outputType(), self.outputKey())
# Also note that we produce it as a transient output.
objKeyStore.addTransient(self.outputType(), self.outputKey())
from TileRecUtils.TileDQstatusAlgDefault import TileDQstatusAlgDefault
TileDQstatusAlgDefault(TileRawChannelContainer=rawChannelContainer)
# now add algorithm to topSequence
# this should always come at the end
mlog.info(" now adding CaloCellMaker to topSequence")
from AthenaCommon.AlgSequence import AlgSequence
topSequence = AlgSequence()
topSequence += theCaloCellMaker
return True
