def _addlist(mlist, fp):
# Set up the mailman-loop address
loopaddr = Utils.ParseEmail(Utils.get_site_email(extra='loop'))[0]
loopmbox = os.path.join(mm_cfg.DATA_DIR, 'owner-bounces.mbox')
# Seek to the end of the text file, but if it's empty write the standard
# disclaimer, and the loop catch address.
fp.seek(0, 2)
if not fp.tell():
print >> fp, """\
# This file is generated by Mailman, and is kept in sync with the
# binary hash file aliases.db. YOU SHOULD NOT MANUALLY EDIT THIS FILE
# unless you know what you're doing, and can keep the two files properly
# in sync. If you screw it up, you're on your own.
"""
print >> fp, '# The ultimate loop stopper address'
print >> fp, '%s: %s' % (loopaddr, loopmbox)
print >> fp
# Bootstrapping. bin/genaliases must be run before any lists are created,
# but if no lists exist yet then mlist is None. The whole point of the
# exercise is to get the minimal aliases.db file into existance.
if mlist is None:
return
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
# The text file entries get a little extra info
print >> fp, '# STANZA START:', listname
print >> fp, '# CREATED:', time.ctime(time.time())
# Now add all the standard alias entries
for k, v in makealiases(listname):
# Format the text file nicely
print >> fp, k + ':', ((fieldsz - len(k)) * ' ') + v
# Finish the text file stanza
print >> fp, '# STANZA END:', listname
print >> fp
def _addlist(mlist, fp):
# Set up the mailman-loop address
loopaddr = Utils.ParseEmail(Utils.get_site_email(extra='loop'))[0]
loopmbox = os.path.join(mm_cfg.DATA_DIR, 'owner-bounces.mbox')
# Seek to the end of the text file, but if it's empty write the standard
# disclaimer, and the loop catch address.
fp.seek(0, 2)
if not fp.tell():
print >> fp, """\
# This file is generated by Mailman, and is kept in sync with the
# binary hash file aliases.db. YOU SHOULD NOT MANUALLY EDIT THIS FILE
# unless you know what you're doing, and can keep the two files properly
# in sync. If you screw it up, you're on your own.
"""
print >> fp, '# The ultimate loop stopper address'
print >> fp, '%s: %s' % (loopaddr, loopmbox)
print >> fp
# Bootstrapping. bin/genaliases must be run before any lists are created,
# but if no lists exist yet then mlist is None. The whole point of the
# exercise is to get the minimal aliases.db file into existance.
if mlist is None:
return
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
# The text file entries get a little extra info
print >> fp, '# STANZA START:', listname
print >> fp, '# CREATED:', time.ctime(time.time())
# Now add all the standard alias entries
for k, v in makealiases(listname):
# Format the text file nicely
print >> fp, k + ':', ((fieldsz - len(k)) * ' ') + v
# Finish the text file stanza
print >> fp, '# STANZA END:', listname
print >> fp
def _addvirtual(mlist, fp):
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
hostname = mlist.host_name
# Set up the mailman-loop address
loopaddr = Utils.get_site_email(mlist.host_name, extra='loop')
loopdest = Utils.ParseEmail(loopaddr)[0]
# Seek to the end of the text file, but if it's empty write the standard
# disclaimer, and the loop catch address.
fp.seek(0, 2)
if not fp.tell():
print >> fp, """\
# This file is generated by Mailman, and is kept in sync with the binary hash
# file virtual-mailman.db. YOU SHOULD NOT MANUALLY EDIT THIS FILE unless you
# know what you're doing, and can keep the two files properly in sync. If you
# screw it up, you're on your own.
#
# Note that you should already have this virtual domain set up properly in
# your Postfix installation. See README.POSTFIX for details.
# LOOP ADDRESSES START
%s\t%s
# LOOP ADDRESSES END
""" % (loopaddr, loopdest)
# The text file entries get a little extra info
print >> fp, '# STANZA START:', listname
print >> fp, '# CREATED:', time.ctime(time.time())
# Now add all the standard alias entries
for k, v in makealiases(listname):
fqdnaddr = '%s@%s' % (k, hostname)
# Format the text file nicely
print >> fp, fqdnaddr, ((fieldsz - len(k)) * ' '), k
# Finish the text file stanza
print >> fp, '# STANZA END:', listname
print >> fp
def create(mlist, cgi=False, nolock=False, quiet=False):
if mlist is None:
return
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
if cgi:
# If a list is being created via the CGI, the best we can do is send
# an email message to mailman-owner requesting that the proper aliases
# be installed.
sfp = StringIO()
if not quiet:
print(_("""
The mailing list `%(listname)s' has been created via the through-the-web
interface. In order to complete the activation of this mailing list, the
proper /etc/aliases (or equivalent) file must be updated. The program
`newaliases' may also have to be run.
Here are the entries for the /etc/aliases file:
"""),
file=sfp)
outfp = sfp
else:
if not quiet:
print(
C_("""\
To finish creating your mailing list, you must edit your /etc/aliases (or
equivalent) file by adding the following lines, and possibly running the
`newaliases' program:
"""))
print(C_("""\
## %(listname)s mailing list"""))
outfp = sys.stdout
# Common path
for k, v in makealiases(listname):
print(k + ':', ((fieldsz - len(k)) * ' '), v, file=outfp)
# If we're using the command line interface, we're done. For ttw, we need
# to actually send the message to mailman-owner now.
if not cgi:
print(file=outfp)
return
# Send the message to the site -owner so someone can do something about
# this request.
siteowner = Utils.get_site_email(extra='owner')
# Should this be sent in the site list's preferred language?
msg = Message.UserNotification(
siteowner, siteowner,
_('Mailing list creation request for list %(listname)s'),
sfp.getvalue(), mm_cfg.DEFAULT_SERVER_LANGUAGE)
msg.send(mlist)
def create(mlist, cgi=False, nolock=False, quiet=False):
if mlist is None:
return
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
if cgi:
# If a list is being created via the CGI, the best we can do is send
# an email message to mailman-owner requesting that the proper aliases
# be installed.
sfp = StringIO()
if not quiet:
print >> sfp, _("""\
The mailing list `%(listname)s' has been created via the through-the-web
interface. In order to complete the activation of this mailing list, the
proper /etc/aliases (or equivalent) file must be updated. The program
`newaliases' may also have to be run.
Here are the entries for the /etc/aliases file:
""")
outfp = sfp
else:
if not quiet:
print _("""\
To finish creating your mailing list, you must edit your /etc/aliases (or
equivalent) file by adding the following lines, and possibly running the
`newaliases' program:
""")
print _("""\
## %(listname)s mailing list""")
outfp = sys.stdout
# Common path
for k, v in makealiases(listname):
print >> outfp, k + ':', ((fieldsz - len(k)) * ' '), v
# If we're using the command line interface, we're done. For ttw, we need
# to actually send the message to mailman-owner now.
if not cgi:
print >> outfp
return
# Send the message to the site -owner so someone can do something about
# this request.
siteowner = Utils.get_site_email(extra='owner')
# Should this be sent in the site list's preferred language?
msg = Message.UserNotification(
siteowner, siteowner,
_('Mailing list creation request for list %(listname)s'),
sfp.getvalue(), mm_cfg.DEFAULT_SERVER_LANGUAGE)
msg.send(mlist)
def remove(mlist, cgi=False):
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
if cgi:
# If a list is being removed via the CGI, the best we can do is send
# an email message to mailman-owner requesting that the appropriate
# aliases be deleted.
sfp = StringIO()
print(_("""\
The mailing list `%(listname)s' has been removed via the through-the-web
interface. In order to complete the de-activation of this mailing list, the
appropriate /etc/aliases (or equivalent) file must be updated. The program
`newaliases' may also have to be run.
Here are the entries in the /etc/aliases file that should be removed:
"""),
file=sfp)
outfp = sfp
else:
print(
C_("""
To finish removing your mailing list, you must edit your /etc/aliases (or
equivalent) file by removing the following lines, and possibly running the
`newaliases' program:
## %(listname)s mailing list"""))
outfp = sys.stdout
# Common path
for k, v in makealiases(listname):
print(k + ':', ((fieldsz - len(k)) * ' '), v, file=outfp)
# If we're using the command line interface, we're done. For ttw, we need
# to actually send the message to mailman-owner now.
if not cgi:
print(file=outfp)
return
siteowner = Utils.get_site_email(extra='owner')
# Should this be sent in the site list's preferred language?
msg = Message.UserNotification(
siteowner, siteowner,
_('Mailing list removal request for list %(listname)s'),
sfp.getvalue(), mm_cfg.DEFAULT_SERVER_LANGUAGE)
msg['Date'] = email.utils.formatdate(localtime=1)
outq = get_switchboard(mm_cfg.OUTQUEUE_DIR)
outq.enqueue(msg, recips=[siteowner], nodecorate=1)
def remove(mlist, cgi=False):
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
if cgi:
# If a list is being removed via the CGI, the best we can do is send
# an email message to mailman-owner requesting that the appropriate
# aliases be deleted.
sfp = StringIO()
print >> sfp, _("""\
The mailing list `%(listname)s' has been removed via the through-the-web
interface. In order to complete the de-activation of this mailing list, the
appropriate /etc/aliases (or equivalent) file must be updated. The program
`newaliases' may also have to be run.
Here are the entries in the /etc/aliases file that should be removed:
""")
outfp = sfp
else:
print _("""
To finish removing your mailing list, you must edit your /etc/aliases (or
equivalent) file by removing the following lines, and possibly running the
`newaliases' program:
## %(listname)s mailing list""")
outfp = sys.stdout
# Common path
for k, v in makealiases(listname):
print >> outfp, k + ':', ((fieldsz - len(k)) * ' '), v
# If we're using the command line interface, we're done. For ttw, we need
# to actually send the message to mailman-owner now.
if not cgi:
print >> outfp
return
siteowner = Utils.get_site_email(extra='owner')
# Should this be sent in the site list's preferred language?
msg = Message.UserNotification(
siteowner, siteowner,
_('Mailing list removal request for list %(listname)s'),
sfp.getvalue(), mm_cfg.DEFAULT_SERVER_LANGUAGE)
msg['Date'] = email.Utils.formatdate(localtime=1)
outq = get_switchboard(mm_cfg.OUTQUEUE_DIR)
outq.enqueue(msg, recips=[siteowner], nodecorate=1)
def _addvirtual(mlist, fp):
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
hostname = mlist.host_name
# Set up the mailman-loop address
loopaddr = Utils.get_site_email(mlist.host_name, extra='loop')
loopdest = Utils.ParseEmail(loopaddr)[0]
if mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN:
loopdest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
# Seek to the end of the text file, but if it's empty write the standard
# disclaimer, and the loop catch address.
fp.seek(0, 2)
if not fp.tell():
print >> fp, """\
# This file is generated by Mailman, and is kept in sync with the binary hash
# file virtual-mailman.db. YOU SHOULD NOT MANUALLY EDIT THIS FILE unless you
# know what you're doing, and can keep the two files properly in sync. If you
# screw it up, you're on your own.
#
# Note that you should already have this virtual domain set up properly in
# your Postfix installation. See README.POSTFIX for details.
# LOOP ADDRESSES START
%s\t%s
# LOOP ADDRESSES END
""" % (loopaddr, loopdest)
# The text file entries get a little extra info
print >> fp, '# STANZA START:', listname
print >> fp, '# CREATED:', time.ctime(time.time())
# Now add all the standard alias entries
for k, v in makealiases(listname):
fqdnaddr = '%s@%s' % (k, hostname)
if mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN:
localaddr = '%s@%s' % (k, mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN)
else:
localaddr = k
# Format the text file nicely
print >> fp, fqdnaddr, ((fieldsz - len(k)) * ' '), localaddr
# Finish the text file stanza
print >> fp, '# STANZA END:', listname
print >> fp
def _addvirtual(mlist, fp):
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
hostname = mlist.host_name
# Set up the mailman-loop address
loopaddr = Utils.get_site_email(mlist.host_name, extra='loop')
loopdest = Utils.ParseEmail(loopaddr)[0]
# And the site list posting address.
siteaddr = Utils.get_site_email(mlist.host_name)
sitedest = Utils.ParseEmail(siteaddr)[0]
# And the site list -owner address.
siteowneraddr = Utils.get_site_email(mlist.host_name, extra='owner')
siteownerdest = Utils.ParseEmail(siteowneraddr)[0]
if mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN:
loopdest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
sitedest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
siteownerdest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
# If the site list's host_name is a virtual domain, adding the list and
# owner addresses to the SITE ADDRESSES will duplicate the entries in the
# stanza for the list. Postfix doesn't like dups so we try to comment them
# here, but only for the actual site list domain.
if (MailList(mm_cfg.MAILMAN_SITE_LIST,
lock=False).host_name.lower() == hostname.lower()):
siteaddr = '#' + siteaddr
siteowneraddr = '#' + siteowneraddr
# Seek to the end of the text file, but if it's empty write the standard
# disclaimer, and the loop catch address and site address.
fp.seek(0, 2)
if not fp.tell():
print >> fp, """\
# This file is generated by Mailman, and is kept in sync with the binary hash
# file virtual-mailman.db. YOU SHOULD NOT MANUALLY EDIT THIS FILE unless you
# know what you're doing, and can keep the two files properly in sync. If you
# screw it up, you're on your own.
#
# Note that you should already have this virtual domain set up properly in
# your Postfix installation. See README.POSTFIX for details.
# LOOP ADDRESSES START
%s\t%s
# LOOP ADDRESSES END
# We also add the site list address in each virtual domain as that address
# is exposed on admin and listinfo overviews, and we add the site list-owner
# address as it is exposed in the list created email notice.
# SITE ADDRESSES START
%s\t%s
%s\t%s
# SITE ADDRESSES END
""" % (loopaddr, loopdest, siteaddr, sitedest, siteowneraddr, siteownerdest)
# The text file entries get a little extra info
print >> fp, '# STANZA START:', listname
print >> fp, '# CREATED:', time.ctime(time.time())
# Now add all the standard alias entries
for k, v in makealiases(listname):
fqdnaddr = '%s@%s' % (k, hostname)
if mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN:
localaddr = '%s@%s' % (k, mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN)
else:
localaddr = k
# Format the text file nicely
print >> fp, fqdnaddr, ((fieldsz - len(k)) * ' '), localaddr
# Finish the text file stanza
print >> fp, '# STANZA END:', listname
print >> fp
def _addvirtual(mlist, fp):
listname = mlist.internal_name()
fieldsz = len(listname) + len('-unsubscribe')
hostname = mlist.host_name
# Set up the mailman-loop address
loopaddr = Utils.get_site_email(mlist.host_name, extra='loop')
loopdest = Utils.ParseEmail(loopaddr)[0]
# And the site list posting address.
siteaddr = Utils.get_site_email(mlist.host_name)
sitedest = Utils.ParseEmail(siteaddr)[0]
# And the site list -owner address.
siteowneraddr = Utils.get_site_email(mlist.host_name, extra='owner')
siteownerdest = Utils.ParseEmail(siteowneraddr)[0]
if mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN:
loopdest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
sitedest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
siteownerdest += '@' + mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN
# If the site list's host_name is a virtual domain, adding the list and
# owner addresses to the SITE ADDRESSES will duplicate the entries in the
# stanza for the list. Postfix doesn't like dups so we try to comment them
# here, but only for the actual site list domain.
if (MailList(mm_cfg.MAILMAN_SITE_LIST, lock=False).host_name.lower() ==
hostname.lower()):
siteaddr = '#' + siteaddr
siteowneraddr = '#' + siteowneraddr
# Seek to the end of the text file, but if it's empty write the standard
# disclaimer, and the loop catch address and site address.
fp.seek(0, 2)
if not fp.tell():
print >> fp, """\
# This file is generated by Mailman, and is kept in sync with the binary hash
# file virtual-mailman.db. YOU SHOULD NOT MANUALLY EDIT THIS FILE unless you
# know what you're doing, and can keep the two files properly in sync. If you
# screw it up, you're on your own.
#
# Note that you should already have this virtual domain set up properly in
# your Postfix installation. See README.POSTFIX for details.
# LOOP ADDRESSES START
%s\t%s
# LOOP ADDRESSES END
# We also add the site list address in each virtual domain as that address
# is exposed on admin and listinfo overviews, and we add the site list-owner
# address as it is exposed in the list created email notice.
# SITE ADDRESSES START
%s\t%s
%s\t%s
# SITE ADDRESSES END
""" % (loopaddr, loopdest, siteaddr, sitedest, siteowneraddr, siteownerdest)
# The text file entries get a little extra info
print >> fp, '# STANZA START:', listname
print >> fp, '# CREATED:', time.ctime(time.time())
# Now add all the standard alias entries
for k, v in makealiases(listname):
fqdnaddr = '%s@%s' % (k, hostname)
if mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN:
localaddr = '%s@%s' % (k, mm_cfg.VIRTUAL_MAILMAN_LOCAL_DOMAIN)
else:
localaddr = k
# Format the text file nicely
print >> fp, fqdnaddr, ((fieldsz - len(k)) * ' '), localaddr
# Finish the text file stanza
print >> fp, '# STANZA END:', listname
print >> fp
