def callBackForWriteAttributeIfNeeded(self, key):
# Scan for this device if there are any pending Write Attributes needed.
if key not in self.ListOfDevices:
return
if "Ep" not in self.ListOfDevices[key]:
return
for endpoint in self.ListOfDevices[key]["Ep"]:
for clusterId in self.ListOfDevices[key]["Ep"][endpoint]:
if clusterId in ("Type", "ColorMode", "ClusterType"):
continue
for attribute in list(
get_list_waiting_request_datastruct(
self, "WriteAttributes", key, endpoint, clusterId)):
self.log.logging(
"WriteAttributes", "Debug",
"device awake let's write attribute for %s/%s" %
(key, endpoint), key)
request = get_request_datastruct(self, "WriteAttributes", key,
endpoint, clusterId,
attribute)
if request is None:
continue
data_type, EPin, EPout, manuf_id, manuf_spec, data, ackIsDisabled = request
write_attribute(self, key, EPin, EPout, clusterId, manuf_id,
manuf_spec, attribute, data_type, data,
ackIsDisabled)
def thermostat_eurotronic_hostflag(self, NwkId, action):
HOSTFLAG_ACTION = {
"turn_display": 0x000002,
"boost": 0x000004,
"clear_off": 0x000010,
"set_off_mode": 0x000020,
"child_lock": 0x000080,
}
if action not in HOSTFLAG_ACTION:
self.log.logging("Thermostats", "Log", "thermostat_eurotronic_hostflag - unknown action %s" % action)
return
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0x0201
attribute = "%04x" % 0x4008
data_type = "22" # U24
data = "%06x" % HOSTFLAG_ACTION[action]
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, attribute, data_type, data)
self.log.logging(
"Thermostats",
"Debug",
"thermostat_eurotronic_hostflag - for %s with value %s / cluster: %s, attribute: %s type: %s action: %s"
% (NwkId, data, cluster_id, attribute, data_type, action),
nwkid=NwkId,
)
def setXiaomiVibrationSensitivity(self, key, sensitivity="medium"):
VIBRATION_SENSIBILITY = {"high": 0x01, "medium": 0x0B, "low": 0x15}
if sensitivity not in VIBRATION_SENSIBILITY:
sensitivity = "medium"
manuf_id = "115f"
manuf_spec = "01"
cluster_id = "%04x" % 0x0000
attribute = "%04x" % 0xFF0D
data_type = "20" # Int8
data = "%02x" % VIBRATION_SENSIBILITY[sensitivity]
write_attribute(
self,
key,
ZIGATE_EP,
"01",
cluster_id,
manuf_id,
manuf_spec,
attribute,
data_type,
data,
ackIsDisabled=is_ack_tobe_disabled(self, key),
)
def danfoss_control_algo(self, NwkId, mode):
# Scale factor of setpoint filter timeconstant ("aggressiveness" of control algorithm) 1= Quick ... 5=Moderate ... 10=Slow
manuf_id = "1246"
manuf_spec = "01"
cluster_id = "%04x" % 0x0201
Hattribute = "%04x" % 0x4020
data_type = "20" # Uint8
self.log.logging("Thermostats",
"Debug",
"Danfoss Aly Control_Algo: %s" % mode,
nwkid=NwkId)
Hdata = "%02x" % mode
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
self.log.logging(
"Thermostats",
"Debug",
"danfoss_control_algo - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec,
Hattribute, data_type, Hdata)
def danfoss_orientation(self, NwkId, orientation):
# 0110 02 955e 01 01 0201 00 01 1246 01 4014 10 01
orient = 0
if orientation == "V":
orient = 1
elif orientation == "H":
orient = 0
else:
return
manuf_id = "1246"
manuf_spec = "01"
cluster_id = "%04x" % 0x0201
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
Hattribute = "%04x" % 0x4014
data_type = "10" # boolean
self.log.logging("Danfoss",
"Debug",
"danfoss_orientation: %s" % orient,
nwkid=NwkId)
Hdata = "%02x" % orient
self.log.logging(
"Danfoss",
"Debug",
"danfoss_orientation for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=False)
read_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
"00",
manuf_spec,
manuf_id,
1,
Hattribute,
ackIsDisabled=False)
def Thermostat_LockMode(self, NwkId, lockmode):
LOCK_MODE = {"unlocked": 0x00, "templock": 0x02, "off": 0x04, "off-2": 0x05}
if lockmode not in LOCK_MODE:
return
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0x0204
Hattribute = "%04x" % 0x0001
data_type = "30" # Int16
self.log.logging("Thermostats", "Debug", "lockmode: %s" % lockmode, nwkid=NwkId)
lockmode = LOCK_MODE[lockmode]
Hdata = "%02x" % lockmode
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0204" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
self.log.logging(
"Thermostats",
"Debug",
"Thermostat_LockMode - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, Hattribute, data_type, Hdata)
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, Hattribute, data_type, Hdata)
def OrviboRegistration(self, nwkid):
cluster = "0000"
attribute = "0099"
datatype = "20"
value = "01"
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "0000" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
# Set Commissioning as Done
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "0000"
Hattribute = "0099"
data_type = "20" # Bool
data = "01"
Domoticz.Log("Orvibo registration for %s" % nwkid)
write_attribute(
self,
nwkid,
ZIGATE_EP,
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
data,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
def tuya_cmd_ts004F(self, NwkId, mode):
TS004F_MODE = {
'Scene': 0x01, # Scene controller
'Dimmer': 0x00, # Remote dimming
}
# By default set to 0x00
if mode not in TS004F_MODE:
return
write_attribute(self,
NwkId,
ZIGATE_EP,
"01",
"0006",
"0000",
"00",
"8004",
"30",
'%02x' % TS004F_MODE[mode],
ackIsDisabled=False)
ieee = self.ListOfDevices[NwkId]['IEEE']
cluster = "0006"
bindDevice(self, ieee, "01", cluster, destaddr=None, destep="01")
bindDevice(self, ieee, "02", cluster, destaddr=None, destep="01")
bindDevice(self, ieee, "03", cluster, destaddr=None, destep="01")
bindDevice(self, ieee, "04", cluster, destaddr=None, destep="01")
def danfoss_exercise_trigger_time(self, NwkId, min_from_midnight):
# Minutes since midnight, 0xFFFF = undefined
if min_from_midnight > 1439:
return
manuf_id = "1246"
manuf_spec = "01"
cluster_id = "%04x" % 0x0201
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
Hattribute = "%04x" % 0x4011
data_type = "21" # uint16
self.log.logging("Danfoss",
"Debug",
"Danfoss Aly Trigger_time Min from Midnigh: %s" %
min_from_midnight,
nwkid=NwkId)
Hdata = "%04x" % min_from_midnight
EPout = "01"
self.log.logging(
"Danfoss",
"Debug",
"danfoss_exercise_trigger_time - Trigger time for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self,
NwkId,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=False)
read_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
"00",
manuf_spec,
manuf_id,
1,
Hattribute,
ackIsDisabled=False)
def danfoss_write_external_sensor_temp(self, NwkId, temp):
# 0110 02 955e 01 01 0201 00 01 1246 01 4015 29 02bc
# Convert value to a 0.5 multiple
temp = 50 * (temp // 50)
manuf_id = "1246"
manuf_spec = "01"
cluster_id = "%04x" % 0x0201
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
Hattribute = "%04x" % 0x4015
data_type = "29" # Int16
self.log.logging("Danfoss",
"Debug",
"danfoss_write_external_sensor_temp: %s" % temp,
nwkid=NwkId)
Hdata = "%04x" % temp
self.log.logging(
"Danfoss",
"Debug",
"danfoss_write_external_sensor_temp - Trigger time for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=False)
read_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
"00",
manuf_spec,
manuf_id,
1,
Hattribute,
ackIsDisabled=False)
def tuya_window_cover_calibration(self, nwkid, start_stop):
# (0x0102) | Write Attributes (0x02) | 0xf001 | 8-Bit (0x30) | 0 (0x00) | Start Calibration
# (0x0102) | Write Attributes (0x02) | 0xf001 | 8-Bit (0x30) | 1 (0x01) | End Calibration
write_attribute(self,
nwkid,
ZIGATE_EP,
"01",
"0102",
"0000",
"00",
"f001",
"30",
start_stop,
ackIsDisabled=True)
def danfoss_exercise_day_of_week(self, NwkId, week_num):
# 0 = Sunday, 1 = Monday, … 6 = Saturday, 7 = undefined
if week_num > 6:
return
manuf_id = "1246"
manuf_spec = "01"
cluster_id = "%04x" % 0x0201
EPout = ListOfEp = getListOfEpForCluster(self, NwkId, "0201")
Hattribute = "%04x" % 0x4010
data_type = "30" # enum8
self.log.logging("Danfoss",
"Debug",
"Danfoss Aly Trigger_Week Num: %s" % week_num,
nwkid=NwkId)
Hdata = "%02x" % week_num
self.log.logging(
"Danfoss",
"Debug",
"danfoss_exercise_trigger_time - Week Num for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
for ep in EPout:
write_attribute(self,
NwkId,
"01",
ep,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=False)
read_attribute(self,
NwkId,
ZIGATE_EP,
ep,
cluster_id,
"00",
manuf_spec,
manuf_id,
1,
Hattribute,
ackIsDisabled=False)
def thermostat_Mode(self, NwkId, mode):
SYSTEM_MODE = {
"Off": 0x00,
"Auto": 0x01,
"Reserved": 0x02,
"Cool": 0x03,
"Heat": 0x04,
"Emergency Heating": 0x05,
"Pre-cooling": 0x06,
"Fan Only": 0x07,
"Dry": 0x08,
"Sleep": 0x09,
}
if mode not in SYSTEM_MODE:
Domoticz.Error("thermostat_Mode - unknown system mode: %s" % mode)
return
if "Model" in self.ListOfDevices[NwkId] and self.ListOfDevices[NwkId]["Model"] in ("AC211", "AC221", "CAC221"):
casaia_check_irPairing(self, NwkId)
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0x0201
attribute = "%04x" % 0x001C
data_type = "30" # Enum8
data = "%02x" % SYSTEM_MODE[mode]
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, attribute, data_type, data)
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Mode - for %s with value %s / cluster: %s, attribute: %s type: %s" % (NwkId, data, cluster_id, attribute, data_type),
nwkid=NwkId,
)
if "Model" in self.ListOfDevices[NwkId] and self.ListOfDevices[NwkId]["Model"] in ("TAFFETAS2 D1.00P1.01Z1.00"):
self.log.logging(
"Thermostats",
"Log",
"thermostat_Mode - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, data, cluster_id, attribute, data_type),
nwkid=NwkId,
)
def tuya_sirene_registration(self, nwkid):
self.log.logging("Tuya", "Debug", "tuya_sirene_registration - Nwkid: %s" % nwkid)
EPout = "01"
payload = "11" + get_and_inc_SQN(self, nwkid) + "10" + "002a"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
# (1) 3 x Write Attribute Cluster 0x0000 - Attribute 0xffde - DT 0x20 - Value: 0x13
EPout = "01"
write_attribute(self, nwkid, ZIGATE_EP, EPout, "0000", "0000", "00", "ffde", "20", "13", ackIsDisabled=False)
# (2) Cmd 0xf0 send on Cluster 0x0000 - no data
payload = "11" + get_and_inc_SQN(self, nwkid) + "f0"
raw_APS_request(
self,
nwkid,
EPout,
"0000",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
# (3) Cmd 0x03 on Cluster 0xef00 (Cluster Specific)
payload = "11" + get_and_inc_SQN(self, nwkid) + "03"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
# Set the Siren to °C
tuya_siren_temp_unit(self, nwkid, unit="C")
def philips_set_pir_occupancySensibility(self, nwkid, level):
if level in (0, 1, 2):
write_attribute(self,
nwkid,
ZIGATE_EP,
"02",
"0406",
"100b",
"01",
"0030",
"20",
"%02x" % level,
ackIsDisabled=False)
ReadAttributeRequest_0406_philips_0030(self, nwkid)
def tuya_window_cover_motor_reversal(self, nwkid, mode):
# (0x0102) | Write Attributes (0x02) | 0xf002 | 8-Bit (0x30) | 0 (0x00) | Off
# (0x0102) | Write Attributes (0x02) | 0xf002 | 8-Bit (0x30) | 1 (0x01) | On
if int(mode) in (0, 1):
write_attribute(self,
nwkid,
ZIGATE_EP,
"01",
"0102",
"0000",
"00",
"f002",
"30",
"%02x" % int(mode),
ackIsDisabled=True)
def tuya_TS0121_registration(self, NwkId):
self.log.logging("Tuya", "Debug",
"tuya_TS0121_registration - Nwkid: %s" % NwkId)
# (1) 3 x Write Attribute Cluster 0x0000 - Attribute 0xffde - DT 0x20 - Value: 0x13
EPout = "01"
write_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
"0000",
"0000",
"00",
"ffde",
"20",
"13",
ackIsDisabled=False)
def setPowerOn_OnOff(self, key, OnOffMode=0xFF):
# OSRAM/LEDVANCE
# 0xfc0f --> Command 0x01
# 0xfc01 --> Command 0x01
# Tested on Ikea Bulb without any results !
POWERON_MODE = (0x00, 0x01, 0xFE) # Off # On # Previous state
if "Manufacturer" in self.ListOfDevices[key]:
manuf_spec = "01"
manuf_id = self.ListOfDevices[key]["Manufacturer"]
else:
manuf_spec = "00"
manuf_id = "0000"
EPin = "01"
EPout = "01"
for tmpEp in self.ListOfDevices[key]["Ep"]:
if "0006" in self.ListOfDevices[key]["Ep"][tmpEp]:
EPout = tmpEp
cluster_id = "0006"
attribute = "4003"
data_type = "30" #
data = "ff"
data = "%02x" % OnOffMode if OnOffMode in POWERON_MODE else "%02x" % 255
self.log.logging(
"Output", "Debug", "set_PowerOn_OnOff for %s/%s - OnOff: %s" %
(key, EPout, OnOffMode), key)
write_attribute(
self,
key,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
attribute,
data_type,
data,
ackIsDisabled=is_ack_tobe_disabled(self, key),
)
ReadAttributeRequest_0006_400x(self, key)
def cable_connected_mode(self, nwkid, Mode):
data_type = "09" # 16-bit Data
Hattribute = "0000"
Hdata = "0000"
if Mode == "10":
# Sortie de Cable: 0x0100
# Radiateur sans FIP: 0x0100
# Appareil de cuisine: 0x0100
Hdata = "0100" # Disable FIP
elif Mode == "20":
# FIP
# Radiateur avec FIP: 0x0200 + Bind fc40 + configReporting ( fc40 / 0000 / TimeOut 600 )
Hdata = "0200" # Enable FIP
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0xFC01
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "fc01" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
write_attribute(
self,
nwkid,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata[2:4] + Hdata[0:2],
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
ReadAttributeRequest_0006_0000(self, nwkid)
ReadAttributeRequest_0b04_050b(self, nwkid)
ReadAttributeRequest_fc40(self, nwkid)
def tuya_backlight_command(self, nwkid, mode):
# 0x0006 / 0x80001
# Indicator LED off: 0x00
# Indicator switch On/Off: 0x01
# Indicate swicth location: 0x02
# (0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 0 (0x00) | Light Mode 1
# (0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 1 (0x01) | Light Mode 2
# (0x0006) | Write Attributes (0x02) | 0x8001 | 8-Bit (0x30) | 2 (0x02) | Light Mode 3
if int(mode) in (0, 1, 2):
write_attribute(self,
nwkid,
ZIGATE_EP,
"01",
"0006",
"0000",
"00",
"8001",
"30",
"%02x" % int(mode),
ackIsDisabled=True)
def casaia_swing_OnOff(self, NwkId, OnOff):
if OnOff not in ("00", "01"):
return
EPout = get_ffad_endpoint(self, NwkId)
write_attribute(
self,
NwkId,
ZIGATE_EP,
EPout,
"0201",
CASAIA_MANUF_CODE,
"01",
"fd00",
"10",
OnOff,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
self.log.logging(
"CasaIA", "Debug",
"swing_OnOff ++++ %s/%s OnOff: %s" % (NwkId, EPout, OnOff), NwkId)
def enableOppleSwitch(self, nwkid):
if nwkid not in self.ListOfDevices:
return
if "Model" not in self.ListOfDevices[nwkid]:
return
if (self.ListOfDevices[nwkid]["Model"]
in ("lumi.remote.b686opcn01-bulb", "lumi.remote.b486opcn01-bulb",
"lumi.remote.b286opcn01-bulb")
and "Lumi" not in self.ListOfDevices[nwkid]):
self.ListOfDevices[nwkid]["Lumi"] = {"AqaraOppleBulbMode": True}
return
manuf_id = "115f"
manuf_spec = "01"
cluster_id = "fcc0"
Hattribute = "0009"
data_type = "20"
Hdata = "01"
self.log.logging(
"Lumi", "Debug",
"Write Attributes LUMI Opple Magic Word Nwkid: %s" % nwkid, nwkid)
write_attribute(
self,
nwkid,
ZIGATE_EP,
"01",
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
def change_fan_mode(self, NwkId, Ep, fan_mode):
if fan_mode not in FAN_MODE:
return
if "Model" in self.ListOfDevices[NwkId] and self.ListOfDevices[NwkId]["Model"] in ("AC211", "AC221", "CAC221"):
casaia_check_irPairing(self, NwkId)
# Fan Mode Sequence
data = "%02x" % 0x02
write_attribute(
self,
NwkId,
ZIGATE_EP,
Ep,
"0202",
"0000",
"00",
"0001",
"30",
data,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
data = "%02x" % FAN_MODE[fan_mode]
write_attribute(
self,
NwkId,
ZIGATE_EP,
Ep,
"0202",
"0000",
"00",
"0000",
"30",
data,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
def thermostat_Setpoint_SPZB(self, NwkId, setpoint):
manuf_id = "1037"
manuf_spec = "01"
cluster_id = "%04x" % 0x0201
Hattribute = "%04x" % 0x4003
data_type = "29" # Int16
self.log.logging("Thermostats", "Debug", "setpoint: %s" % setpoint, nwkid=NwkId)
setpoint = int((setpoint * 2) / 2) # Round to 0.5 degrees
self.log.logging("Thermostats", "Debug", "setpoint: %s" % setpoint, nwkid=NwkId)
Hdata = "%04x" % setpoint
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Setpoint_SPZB - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, Hattribute, data_type, Hdata)
def thermostat_Setpoint(self, NwkId, setpoint):
self.log.logging("Thermostats", "Debug", "thermostat_Setpoint - for %s with value %s" % (NwkId, setpoint), nwkid=NwkId)
if "Model" in self.ListOfDevices[NwkId] and self.ListOfDevices[NwkId]["Model"] != {}:
if self.ListOfDevices[NwkId]["Model"] == "SPZB0001":
# Eurotronic
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Setpoint - calling SPZB for %s with value %s" % (NwkId, setpoint),
nwkid=NwkId,
)
thermostat_Calibration(self, NwkId)
thermostat_Setpoint_SPZB(self, NwkId, setpoint)
return
if self.ListOfDevices[NwkId]["Model"] in ("EH-ZB-RTS", "EH-ZB-HACT", "EH-ZB-VACT", "Wiser2-Thermostat", "iTRV"):
# Schneider
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Setpoint - calling Schneider for %s with value %s" % (NwkId, setpoint),
nwkid=NwkId,
)
schneider_setpoint(self, NwkId, setpoint)
return
if self.ListOfDevices[NwkId]["Model"] in (TUYA_eTRV_MODEL):
# Tuya
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Setpoint - calling Tuya for %s with value %s" % (NwkId, setpoint),
nwkid=NwkId,
)
tuya_setpoint(self, NwkId, setpoint)
return
if self.ListOfDevices[NwkId]["Model"] in ("AC201A",):
casaia_setpoint(self, NwkId, setpoint)
return
if self.ListOfDevices[NwkId]["Model"] in ("eTRV0100", "eT093WRO"):
if "Param" in self.ListOfDevices[NwkId] and "DanfossSetPointType" in self.ListOfDevices[NwkId]["Param"] and int(self.ListOfDevices[NwkId]["Param"]["DanfossSetPointType"]):
thermostat_Calibration(self, NwkId)
thermostat_Setpoint_Danfoss(self, NwkId, setpoint)
ReadAttributeRequest_0201(self, NwkId)
return
self.log.logging("Thermostats", "Debug", "thermostat_Setpoint - standard for %s with value %s" % (NwkId, setpoint), nwkid=NwkId)
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
# Heat setpoint by default
cluster_id = "%04x" % 0x0201
Hattribute = "%04x" % 0x0012
if (
cluster_id in self.ListOfDevices[NwkId]["Ep"][EPout]
and "001c" in self.ListOfDevices[NwkId]["Ep"][EPout][cluster_id]
and self.ListOfDevices[NwkId]["Ep"][EPout][cluster_id]["001c"] == 0x03
):
# Cool Setpoint
Hattribute = "%04x" % 0x0011
manuf_id = "0000"
manuf_spec = "00"
data_type = "29" # Int16
self.log.logging("Thermostats", "Debug", "setpoint: %s" % setpoint, nwkid=NwkId)
setpoint = int((setpoint * 2) / 2) # Round to 0.5 degrees
self.log.logging("Thermostats", "Debug", "setpoint: %s" % setpoint, nwkid=NwkId)
Hdata = "%04x" % setpoint
if self.ZiGateModel == 2 and int(self.FirmwareVersion, 16) < 0x0320:
# Bug on ZiGate V2 - firmware 0x320 fix it
Domoticz.Log("---Zigate Model: %s Version: %s" % (self.ZiGateModel, self.FirmwareVersion))
Hdata = Hdata[2:4] + Hdata[0:2]
Domoticz.Log("Patch Hdata %s" % Hdata)
EPout = "01"
self.log.logging(
"Thermostats",
"Deug",
"thermostat_Setpoint - for %s with value 0x%s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, Hattribute, data_type, Hdata)
ReadAttributeRequest_0201(self, NwkId)
def danfoss_viewdirection(self, NwkId, viewdirection):
# Command Manufactuer Specific
# Set viewing direction
# 0110 02 955e 01 01 0204 00 01 1246 01 4000 30 01
viewdir = 0
if viewdirection == 1:
viewdir = 0
elif viewdirection == 2:
viewdir = 1
else:
return
manuf_id = "1246"
manuf_spec = "01"
cluster_id = "%04x" % 0x0204
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
Hattribute = "%04x" % 0x4000
data_type = "30" # enum8
self.log.logging("Danfoss",
"Debug",
"danfoss_viewdirection: %s" % viewdir,
nwkid=NwkId)
Hdata = "%02x" % viewdir
self.log.logging(
"Danfoss",
"Debug",
"danfoss_viewdirection for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, Hdata, cluster_id, Hattribute, data_type),
nwkid=NwkId,
)
write_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=False)
read_attribute(self,
NwkId,
ZIGATE_EP,
EPout,
cluster_id,
"00",
manuf_spec,
manuf_id,
1,
Hattribute,
ackIsDisabled=False)
def legrand_fc01(self, nwkid, command, OnOff):
# EnableLedInDark -> enable to detect the device in dark
# EnableDimmer -> enable/disable dimmer
# EnableLedIfOn -> enable Led with device On
self.log.logging("Legrand", "Debug", "legrand_fc01 Nwkid: %s Cmd: %s OnOff: %s " % (nwkid, command, OnOff), nwkid)
LEGRAND_REFRESH_TIME = (3 * 3600) + 15
LEGRAND_COMMAND_NAME = ("LegrandFilPilote", "EnableLedInDark", "EnableDimmer", "EnableLedIfOn", "EnableLedShutter")
if nwkid not in self.ListOfDevices:
return
if command not in LEGRAND_COMMAND_NAME:
Domoticz.Error("Unknown Legrand command %s" % command)
return
if "Model" not in self.ListOfDevices[nwkid]:
return
if self.ListOfDevices[nwkid]["Model"] in ( {} , "" ):
return
if self.ListOfDevices[nwkid]["Model"] not in LEGRAND_CLUSTER_FC01:
self.log.logging(
"Legrand",
"Error",
"%s is not an Legrand known model: %s" % (nwkid, self.ListOfDevices[nwkid]["Model"]),
nwkid,
)
return
if "Legrand" not in self.ListOfDevices[nwkid]:
self.ListOfDevices[nwkid]["Legrand"] = {}
for cmd in LEGRAND_COMMAND_NAME:
if cmd not in self.ListOfDevices[nwkid]["Legrand"]:
self.ListOfDevices[nwkid]["Legrand"][cmd] = 0xFF
if command == "EnableLedInDark" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableLedInDark"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableLedInDark"] = int(time())
data_type = "10" # Bool
Hdata = "%02x" % OnOff
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
elif command == "EnableLedShutter" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableLedShutter"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableLedShutter"] = int(time())
data_type = "10" # Bool
Hdata = "%02x" % OnOff
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
elif command == "EnableDimmer" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableDimmer"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableDimmer"] = int(time())
data_type = "09" # 16-bit Data
if OnOff == 1:
Hdata = "0101" # Enable Dimmer
elif OnOff == 0:
Hdata = "0100" # Disable Dimmer
else:
Hdata = "0000"
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
elif command == "EnableLedIfOn" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableLedIfOn"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableLedIfOn"] = int(time())
data_type = "10" # Bool
Hdata = "%02x" % OnOff
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
else:
return
Hattribute = LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]][command]
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0xFC01
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "fc01" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
self.log.logging(
"Legrand",
"Debug",
"legrand %s OnOff - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (command, nwkid, Hdata, cluster_id, Hattribute, data_type),
nwkid=nwkid,
)
write_attribute(
self,
nwkid,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
ReadAttributeRequest_fc01(self, nwkid)
def tuya_registration(self, nwkid, device_reset=False, parkside=False):
if "Model" not in self.ListOfDevices[nwkid]:
return
_ModelName = self.ListOfDevices[nwkid]["Model"]
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s Model: %s" % (nwkid, _ModelName))
# (1) 3 x Write Attribute Cluster 0x0000 - Attribute 0xffde - DT 0x20 - Value: 0x13 ( 19 Decimal)
# It looks like for Lidl Watering switch the Value is 0x0d ( 13 in decimal )
EPout = "01"
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s ----- 0x13 in 0x0000/0xffde" % nwkid)
if parkside:
write_attribute(self,
nwkid,
ZIGATE_EP,
EPout,
"0000",
"0000",
"00",
"ffde",
"20",
"0d",
ackIsDisabled=True)
else:
write_attribute(self,
nwkid,
ZIGATE_EP,
EPout,
"0000",
"0000",
"00",
"ffde",
"20",
"13",
ackIsDisabled=True)
# (3) Cmd 0x03 on Cluster 0xef00 (Cluster Specific) / Zigbee Device Reset
if device_reset:
payload = "11" + get_and_inc_SQN(self, nwkid) + "03"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s reset device Cmd: 03" % nwkid)
# Gw->Zigbee gateway query MCU version
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s Request MCU Version Cmd: 10" % nwkid)
if _ModelName in ("TS0601-_TZE200_nklqjk62", ):
payload = "11" + get_and_inc_SQN(self, nwkid) + "10" + "000e"
else:
payload = "11" + get_and_inc_SQN(self, nwkid) + "10" + "0002"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
def thermostat_Calibration(self, NwkId, calibration=None):
# Calibration is an int8 representing a temperature offset (in the range -2.5°C to 2.5°C)
# from 0xE7 ( -2.5 ) to 0x19 ( +2.5 )
# that can be added to or subtracted from the displayed temperature
if (
"Param" in self.ListOfDevices[NwkId]
and "Calibration" in self.ListOfDevices[NwkId]["Param"]
and isinstance(self.ListOfDevices[NwkId]["Param"]["Calibration"], (float, int))
):
calibration = int(10 * self.ListOfDevices[NwkId]["Param"]["Calibration"])
if calibration is None:
calibration = 0
if calibration < -25 or calibration > 25:
self.log.logging(
"Thermostats",
"Error",
"thermostat_Calibration - Wrong Calibration offset on %s off %s" % (NwkId, calibration),
)
calibration = 0
if calibration < 0:
# in two’s complement form
calibration = int(hex(-calibration - pow(2, 32))[9:], 16)
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Calibration - 2 complement form of Calibration offset on %s off %s" % (NwkId, calibration),
)
if "Thermostat" not in self.ListOfDevices[NwkId]:
self.ListOfDevices[NwkId]["Thermostat"] = {}
if (
"Calibration" in self.ListOfDevices[NwkId]["Thermostat"]
and calibration == 10 * self.ListOfDevices[NwkId]["Thermostat"]["Calibration"]
):
return
self.log.logging("Thermostats", "Log", "thermostat_Calibration - Set Thermostat offset on %s off %s" % (NwkId, calibration))
self.ListOfDevices[NwkId]["Thermostat"]["Calibration"] = calibration
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0x0201
attribute = "%04x" % 0x0010
data_type = "28" # Int8
data = "%02x" % calibration
EPout = "01"
for tmpEp in self.ListOfDevices[NwkId]["Ep"]:
if "0201" in self.ListOfDevices[NwkId]["Ep"][tmpEp]:
EPout = tmpEp
write_attribute(self, NwkId, "01", EPout, cluster_id, manuf_id, manuf_spec, attribute, data_type, data)
self.log.logging(
"Thermostats",
"Debug",
"thermostat_Calibration - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (NwkId, data, cluster_id, attribute, data_type),
nwkid=NwkId,
)
