def try_weight_sensor(self):
print("Try Weight Sensor")
try:
# Allocate a new Phidget Channel object
self.ch = VoltageRatioInput()
self.do = DigitalOutput()
self.ch.setChannel(0)
self.do.setChannel(6)
self.ch.setOnAttachHandler(onAttachHandler)
self.ch.setOnDetachHandler(onDetachHandler)
self.ch.setOnErrorHandler(onErrorHandler)
self.ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
self.ch.setOnSensorChangeHandler(onSensorChangeHandler)
# Open the channel with a timeout
try:
self.ch.openWaitForAttachment(5000)
self.do.openWaitForAttachment(5000)
except PhidgetException as e:
# PrintOpenErrorMessage(e, self.ch)
raise EndProgramSignal("Program Terminated: Open Failed")
print("THREAD STARTING")
weight_thread = threading.Thread(
target=self.start_getting_weight_value)
weight_thread.daemon = True
weight_thread.start()
except Exception as e:
self.ch.close()
self.try_conneting_again()
def attachSensor(self):
'''
Connects the strain sensor to the application
'''
self.channel = VoltageRatioInput()
self.channel.setDeviceSerialNumber(self.deviceSN)
self.channel.setChannel(self.channelNo)
self.channel.openWaitForAttachment(100)
print("\n***** {} Sensor Attached *****".format(self.sensorName))
self.attached = True
self.channel.setDataInterval(self.dataInterval)
self.channel.setBridgeGain(0x8)
def __init__(self, tunnel_info, name, logger):
self.tunnel_info = tunnel_info
self.name = name
self.logger = logger
self.latches = {}
for name, info in self.tunnel_info.latches_info.items():
self.latches[name] = Latch(info, self.name + '_' + name + "_latch",
self.logger)
self.voltage_ratio_input = VoltageRatioInput(
self.tunnel_info.voltage_ratio_input_info,
self.name + '_load_cell', self.logger)
def main():
print("Setting up Phidget...")
try:
ch = VoltageRatioInput()
ch.setOnAttachHandler(onAttachHandler)
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
print("Phidget Set Up.")
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
print(e)
print("Cleaning up...")
ch.close()
runningLED.on()
line = []
testNum = 0
while 1:
if startButton.is_pressed:
testNum += 1
timeStruct = time.localtime()
startTime = "{}-{}-{}T{}{}{}".format(timeStruct[0],
timeStruct[1],
timeStruct[2],
timeStruct[3],
timeStruct[4],
timeStruct[5])
output_file = startTime + ".csv"
simpleQ = startCollecting(ch, testNum, output_file)
time.sleep(0.5)
offset = configureOffset(77262, ch.voltageRatio)
print(offset)
currentVoltage = ch.voltageRatio
currentSec = time.time()
secondsElapsed = 0
while not stopButton.is_pressed:
if currentVoltage != ch.voltageRatio:
force = 77262 * ch.voltageRatio - offset
currentVoltage = ch.voltageRatio
force = "{0:.2f}".format(force)
print(force)
if time.time() - currentSec > 0.9:
secondsElapsed += 1
currentSec = time.time()
seconds = "{}".format(secondsElapsed)
simpleQ.put((seconds, force))
try:
stopCollecting(ch, testNum, simpleQ, output_file)
time.sleep(1)
except error as e:
print("Something went wrong.")
print(e)
pause()
def main():
voltageRatioInput0 = VoltageRatioInput()
voltageRatioInput0.setOnVoltageRatioChangeHandler(onVoltageRatioChange)
voltageRatioInput0.openWaitForAttachment(5000)
try:
input("Press Enter to Stop\n")
except (Exception, KeyboardInterrupt):
pass
voltageRatioInput0.close()
def main():
#Create your Phidget channels
voltageRatioInput0 = VoltageRatioInput()
#Set addressing parameters to specify which channel to open (if any)
#Assign any event handlers you need before calling open so that no events are missed.
voltageRatioInput0.setOnSensorChangeHandler(onSensorChange)
#Open your Phidgets and wait for attachment
voltageRatioInput0.openWaitForAttachment(5000)
#Do stuff with your Phidgets here or in your event handlers.
#Set the sensor type to match the analog sensor you are using after opening the Phidget
voltageRatioInput0.setSensorType(VoltageRatioSensorType.SENSOR_TYPE_1111)
try:
input("Press Enter to Stop\n")
except (Exception, KeyboardInterrupt):
pass
#Close your Phidgets once the program is done.
voltageRatioInput0.close()
def connect_to_device():
# Connect to device. Make sure anything else reading it is closed.
ch = VoltageRatioInput.VoltageRatioInput()
ch.close()
ch.setDeviceSerialNumber(533042)
ch.setChannel(1)
ch.open() # not sure if needed
ch.openWaitForAttachment(800)
time.sleep(1.5)
print("trying to read voltage ratio:")
print(ch.getVoltageRatio())
print("setting data interval to 8ms")
ch.setDataInterval(8)
return ch
def main():
snd1 = SoundSensor()
snd2 = SoundSensor()
temp = VoltageRatioInput()
hum = VoltageRatioInput()
light = VoltageInput()
openChannels(snd1, snd2, temp, hum, light)
for i in range(10):
print(getJSONSensorValues(snd1, snd2, temp, hum, light))
print('')
time.sleep(1)
snd1.close()
snd2.close()
temp.close()
hum.close()
light.close()
def __init__(self):
self.channelList = [
VoltageRatioInput(),
VoltageRatioInput(),
VoltageRatioInput(),
VoltageRatioInput(),
VoltageRatioInput(),
VoltageRatioInput(),
VoltageRatioInput(),
VoltageRatioInput()
]
i = 0
for i in range(len(self.channelList)):
self.channelList[i].setChannel(i)
i = i + 1
self.sensorOutput = [0, 0, 0, 0, 0, 0, 0, 0]
self.hasSensor = [False] * 8
self.hasNewData = False
self.channelLabel = [""] * 8
class SensorHandler:
startTime = 0
voltageRatioInput0 = VoltageRatioInput()
results = {}
def __init__(self, calibrateOutput):
self.calibrateOutput = calibrateOutput
def onSensorChangeCalibration(self, test, sensorValue, sensorUnit):
self.calibrateOutput.setText(str(int(round(100 * sensorValue))) + "%")
def StartSensorCalibrate(self, outputPath):
#Set addressing parameters to specify which channel to open (if any)
self.voltageRatioInput0.setIsHubPortDevice(True)
self.voltageRatioInput0.setHubPort(0)
self.voltageRatioInput0.setOnSensorChangeHandler(
self.onSensorChangeCalibration)
try:
self.voltageRatioInput0.openWaitForAttachment(5000)
self.voltageRatioInput0.setSensorType(
VoltageRatioSensorType.SENSOR_TYPE_1112)
except PhidgetException:
print("Please attach the sensor")
def CloseSensor(self):
self.voltageRatioInput0.close()
return self.results
def onSensorChange(self, test, sensorValue, sensorUnit):
if self.startTime == 0:
self.startTime = time.time()
self.results["{0:.2f}".format(time.time() - self.startTime)] = str(
sensorValue * 100)
def StartSensor(self, outputPath):
self.voltageRatioInput0.setOnSensorChangeHandler(self.onSensorChange)
try:
self.voltageRatioInput0.openWaitForAttachment(5000)
self.voltageRatioInput0.setSensorType(
VoltageRatioSensorType.SENSOR_TYPE_1112)
except PhidgetException:
print("Please attach the sensor")
async def LoadCellManagerTest(logger_func, **kwargs):
"""
First Prototype Function
"""
voltage_func = lambda V: kwargs["m"] * V + kwargs["b"]
manager = Manager()
def onVoltage(self, vr):
logger_func(voltage_func, vr)
volr = VoltageRatioInput()
volr.setOnVoltageRatioChangeHandler(onVoltage)
volr.openWaitForAttachment(5000)
while 1:
pass
async def LoadCellManager(logger_func, **kwargs):
"""
Generic Function for DataRecorderClass Format
"""
#voltage_func = lambda V: kwargs["m"]*V + kwargs["b"]
manager = Manager()
def onVoltage(self, vr):
data = {"timestamp": ts(), "voltage": vr}
logger_func(data)
volr = VoltageRatioInput()
volr.setOnVoltageRatioChangeHandler(onVoltage)
volr.openWaitForAttachment(5000)
while 1:
pass
def init_load_cell(self, cfg):
self.lc = VoltageRatioInput()
self.lc.setDeviceSerialNumber(cfg["serialnumber"])
self.lc.setChannel(cfg["channel"])
class HardwareManager:
cmdbuffer = stack(max=64)
#true -> on
#false -> off
states = {
"pressurize_tanks": False,
"lox_vent": False,
"kerosene_vent": False,
"lox_dump": False,
"kerosene_dump": False,
"shutdown": False,
"emergency_shutdown": False
}
current_pressures = {"p1": 0, "p2": 0, "p3": 0, "p4": 0}
def init_load_cell(self, cfg):
self.lc = VoltageRatioInput()
self.lc.setDeviceSerialNumber(cfg["serialnumber"])
self.lc.setChannel(cfg["channel"])
def __init__(self, cfg, net: Net):
self.hcfg = cfg["rpi"]["GPIO"]
self.net = net
self.logger = logging.getLogger("Hardware")
#init gpio
for valve in self.hcfg["valves"].keys():
GPIO.setup(self.hcfg[valve]["v"], GPIO.OUT, initial=GPIO.LOW)
for sensor in self.hcfg["pressure"].keys():
pass
self.init_load_cell(self.hcfg["loadcell"])
self.logger.info("Hardware Initialized")
def report_states(self):
return self.states
def report_data(self) -> dict:
pass
async def collect_data(self):
while 1:
pass
def cmd(self, cmd):
self.cmdbuffer.put_nowait(cmd)
def exec(self, cmd: str):
"""
executes necessary hardware changes to cause system change
:param cmd: string for selected hardware sequence
:return: nothing
"""
if cmd == "lox_vent":
self.states["lox_vent"] = True
elif cmd == "kerosene_vent":
self.states["kerosene_vent"] = True
elif cmd == "ignition":
self.states["kerosene_dump"] = True
self.states["lox_dump"] = True
elif cmd == "kerosene_dump":
self.states["kerosene_dump"] = True
elif cmd == "lox_dump":
self.states["lox_dump"] = True
elif cmd == "pressurize":
self.states["pressurize"] = True
elif cmd == "shutdown":
pass
def main():
try:
"""
* Allocate a new Phidget Channel object
"""
ch = VoltageRatioInput()
"""
* Set matching parameters to specify which channel to open
"""
#You may remove this line and hard-code the addressing parameters to fit your application
channelInfo = AskForDeviceParameters(ch)
ch.setDeviceSerialNumber(channelInfo.deviceSerialNumber)
ch.setHubPort(channelInfo.hubPort)
ch.setIsHubPortDevice(channelInfo.isHubPortDevice)
ch.setChannel(channelInfo.channel)
if (channelInfo.netInfo.isRemote):
ch.setIsRemote(channelInfo.netInfo.isRemote)
if (channelInfo.netInfo.serverDiscovery):
try:
Net.enableServerDiscovery(
PhidgetServerType.PHIDGETSERVER_DEVICEREMOTE)
except PhidgetException as e:
PrintEnableServerDiscoveryErrorMessage(e)
raise EndProgramSignal(
"Program Terminated: EnableServerDiscovery Failed")
else:
Net.addServer("Server", channelInfo.netInfo.hostname,
channelInfo.netInfo.port,
channelInfo.netInfo.password, 0)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
print("\nSetting OnAttachHandler...")
ch.setOnAttachHandler(onAttachHandler)
print("Setting OnDetachHandler...")
ch.setOnDetachHandler(onDetachHandler)
print("Setting OnErrorHandler...")
ch.setOnErrorHandler(onErrorHandler)
#This call may be harmlessly removed
PrintEventDescriptions()
print("\nSetting OnVoltageRatioChangeHandler...")
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
print("\nSetting OnSensorChangeHandler...")
ch.setOnSensorChangeHandler(onSensorChangeHandler)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
try:
ch.openWaitForAttachment(5000)
except PhidgetException as e:
PrintOpenErrorMessage(e, ch)
raise EndProgramSignal("Program Terminated: Open Failed")
print("Sampling data for 10 seconds...")
print(
"You can do stuff with your Phidgets here and/or in the event handlers."
)
time.sleep(10)
"""
* Perform clean up and exit
"""
print("\nDone Sampling...")
print("Cleaning up...")
ch.close()
print("\nExiting...")
return 0
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
DisplayError(e)
traceback.print_exc()
print("Cleaning up...")
ch.close()
return 1
except EndProgramSignal as e:
print(e)
print("Cleaning up...")
ch.close()
return 1
except RuntimeError as e:
sys.stderr.write("Runtime Error: \n\t" + e)
traceback.print_exc()
return 1
finally:
print("Press ENTER to end program.")
readin = sys.stdin.readline()
import sys
import time
import csv
from Phidget22.Devices.VoltageRatioInput import *
from Phidget22.PhidgetException import *
from Phidget22.Phidget import *
from Phidget22.Net import *
#declaration des 2 cartes et des 4 voies par jauges (8 au total)
ch1 = VoltageRatioInput()
ch10 = VoltageRatioInput()
ch11 = VoltageRatioInput()
ch12 = VoltageRatioInput()
ch13 = VoltageRatioInput()
ch2 = VoltageRatioInput()
ch20 = VoltageRatioInput()
ch21 = VoltageRatioInput()
ch22 = VoltageRatioInput()
ch23 = VoltageRatioInput()
def init():
#declaration des cartes avec numero de serie le gain de 1, internal de temps 8 millisecondes
ch1.setDeviceSerialNumber(513024)
ch1.openWaitForAttachment(5000)
ch1.setBridgeGain(1)
ch1.setDataInterval(8)
ch1.setBridgeEnabled(1)
ch1.close()
time.sleep(0.5)
ch2.setDeviceSerialNumber(514788)
elif compensatedvalue > self.maxVoltageRatio:
self.maxVoltageRatio = voltageRatio
"""
* Outputs the VoltageRatioInput's most recently reported sensor value.
* Fired when a VoltageRatioInput channel with onSensorChangeHandler registered meets DataInterval and ChangeTrigger criteria
*
* @param self The VoltageRatioInput channel that fired the SensorChange event
* @param sensorValue The reported sensor value from the VoltageRatioInput channel
"""
def onSensorChangeHandler(self, sensorValue, sensorUnit):
print("[Sensor Event] -> Sensor Value: " + str(sensorValue) +
sensorUnit.symbol)
# New channel object
ch = VoltageRatioInput()
# Make directory and open file for writting
if not os.path.exists(LOG_FOLDER_NAME):
os.makedirs(LOG_FOLDER_NAME)
f = open(FILE_LOG_SESSION, "w+") # Overwrite
# Write CSV file header
f.write("Time, Time Since Begin, V/V Raw Data, Force \n")
ch.file = f
# Setup Phidget device parameters
ch.setDeviceSerialNumber(-1)
ch.setHubPort(-1)
ch.setIsHubPortDevice(False)
ch.setChannel(0)
class PneumaticFrame2:
def __init__(self, master, initial_name, top_name, color, sol, reg_pwr,
reg_set, reg_get, PSI):
self.frame = Frame(master, borderwidth=2, relief=SUNKEN, bg=color)
self.frame.pack()
self.master = master
self.frame_name = StringVar()
self.frame_name.set(initial_name)
self.state = 0
self.fontType = "Comic Sans"
self.activeColor = 'SpringGreen4'
self.frameColor = color
self.pressure = IntVar()
self.lock_flag = IntVar()
self.pressure.set("")
self.power = Button(self.frame,
text="PWR",
activebackground=self.activeColor,
command=lambda: self.toggle_pwr())
self.set_label = Button(self.frame,
text="SET LABEL",
font=(self.fontType, 7),
command=lambda: self.get_label_input())
self.observed_pressure = Entry(self.frame,
width=5,
state="readonly",
textvariable=self.pressure)
if self.frame_name.get() == "Hydro":
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=92,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
else:
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=50,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
self.custom_label = Label(self.frame,
textvariable=self.frame_name,
font=(self.fontType, 14),
bg=color)
self.label = Label(self.frame, text=initial_name, bg=color)
self.lock = Checkbutton(self.frame,
text="LOCK",
bg=color,
variable=self.lock_flag,
command=self.lock)
self.frame_name.set(top_name)
# Init the pressure scale to the default value.
self.set_pressure_scale.set(PSI)
# Lock hydo at startup
if initial_name == "Hydro":
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
self.frame.rowconfigure(0, minsize=30)
self.custom_label.grid(row=0, column=0, columnspan=2, sticky=S)
self.set_label.grid(column=0, row=1, columnspan=2)
self.frame.rowconfigure(2, minsize=50)
self.power.grid(column=0, row=2)
self.observed_pressure.grid(column=1, row=2)
self.set_pressure_scale.grid(column=0, row=3, columnspan=2, padx=20)
self.frame.rowconfigure(4, minsize=5)
self.label.grid(column=0, row=5)
self.lock.grid(column=1, row=5)
# Connect to Phidget Solid State Relay for solinoid control
if self.frame_name.get() == "Hydro":
self.solenoid_switch = DigitalOutput()
self.solenoid_switch.setDeviceSerialNumber(sol[0])
self.solenoid_switch.setIsHubPortDevice(False)
self.solenoid_switch.setHubPort(sol[1])
self.solenoid_switch.setChannel(sol[2])
self.solenoid_switch.openWaitForAttachment(5000)
#Connect to Phidget Solid State Relay for regulator power control
self.reg_switch = DigitalOutput()
self.reg_switch.setDeviceSerialNumber(reg_pwr[0])
self.reg_switch.setIsHubPortDevice(False)
self.reg_switch.setHubPort(reg_pwr[1])
self.reg_switch.setChannel(reg_pwr[2])
self.reg_switch.openWaitForAttachment(5000)
#Connect to Phidget Voltage Ouptut for pressure control
self.pressure_ctrl = VoltageOutput()
self.pressure_ctrl.setDeviceSerialNumber(reg_set[0])
self.pressure_ctrl.setIsHubPortDevice(False)
self.pressure_ctrl.setHubPort(reg_set[1])
self.pressure_ctrl.setChannel(reg_set[2])
self.pressure_ctrl.openWaitForAttachment(5000)
#Connect to Phidget Analog Input for pressure reading
self.pressure_reading = VoltageRatioInput()
self.pressure_reading.setDeviceSerialNumber(reg_get[0])
#One of the VINT Hubs on the SBC is used and needs special configuration
if reg_get[0] == SBCH:
self.pressure_reading.setIsHubPortDevice(True)
self.pressure_reading.setHubPort(0)
self.pressure_reading.setChannel(reg_get[1])
self.pressure_reading.openWaitForAttachment(5000)
def toggle_pwr(self):
#Turn on air channel
if self.state == 0:
#Turn on power to regulator and show active button color
self.power.config(bg=self.activeColor)
self.reg_switch.setState(True)
if self.frame_name.get() == "Hydro":
self.solenoid_switch.setState(True)
#Start monitoring air pressure
self.update_pressure()
#Change state of air channel
self.state = 1
#Turn off air channel
elif self.state == 1:
remember_state = self.set_pressure_scale.get()
if self.frame_name.get() != "Hydro":
messagebox.showinfo(
self.frame_name.get() + " Warning",
"Pressure will be set to zero. Acknowledge that " +
self.frame_name.get() + " is in a safe configuration")
# Change pressure to zero
self.set_pressure_scale.set(0)
self.set_pressure(0)
time.sleep(0.5)
self.frame.update()
self.reg_switch.setState(False)
time.sleep(0.5)
self.set_pressure_scale.set(remember_state)
if self.frame_name.get() == "Hydro":
self.solenoid_switch.setState(False)
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
#Turn off power to reguluator and remove active button color
self.power.config(bg="SystemButtonFace")
#Update air channel state
self.state = 0
def get_label_input(self):
self.window = popupWindow(self.master)
self.set_label.config(state=DISABLED)
self.master.wait_window(self.window.top)
self.set_label.config(state=NORMAL)
#If the user does not enter a value exception will be produced
try:
if len(self.window.value) > 12:
self.frame_name.set("SET ERROR")
else:
self.frame_name.set(self.window.value)
except:
self.frame_name.set("SET ERROR")
def set_pressure(self, val):
# Pressure Range
range = MAXPR - MINPR
# Calculate volts/PSI
ratio = 5 / range
self.pressure_ctrl.setVoltage(float(val) * ratio)
def update_pressure(self):
if self.reg_switch.getState():
try:
val = float(self.pressure_reading.getSensorValue())
PSI = val * 165.63 - 30.855
PSI = round(PSI, 2)
self.pressure.set(PSI)
#Low pressure check
if PSI < (self.set_pressure_scale.get() - 3):
if self.frame.cget('bg') == "Red":
self.frame.config(bg=self.frameColor)
self.set_pressure_scale.config(bg=self.frameColor)
self.custom_label.config(bg=self.frameColor)
self.label.config(bg=self.frameColor)
self.lock.config(bg=self.frameColor)
else:
self.frame.config(bg='Red')
self.set_pressure_scale.config(bg="Red")
self.custom_label.config(bg="Red")
self.label.config(bg="Red")
self.lock.config(bg="Red")
if PSI > (self.set_pressure_scale.get() - 3):
if self.frame.cget('bg') == "Red":
self.frame.config(bg=self.frameColor)
self.set_pressure_scale.config(bg=self.frameColor)
self.custom_label.config(bg=self.frameColor)
self.label.config(bg=self.frameColor)
self.lock.config(bg=self.frameColor)
except:
print("Init Air Pressure")
root.after(200, self.update_pressure)
else:
self.pressure.set("")
def lock(self):
if self.lock_flag.get() == True:
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
elif self.lock_flag.get() == False:
self.set_pressure_scale.config(state="normal")
self.power.config(state="normal")
def __init__(self, provider, channel):
self.ai = VoltageRatioInput()
self.ai.setDeviceSerialNumber(provider)
self.ai.setChannel(channel)
self.ai.setOnAttachHandler(self._attached)
self.ai.openWaitForAttachment(1000)
def main():
voltageRatioInput0 = VoltageRatioInput()
voltageRatioInput0.setIsHubPortDevice(True)
voltageRatioInput0.setHubPort(0)
print(*[x for x in voltageRatioInput0.__dir__() if "DataInterval" in x],
sep="\n")
voltageRatioInput0.setOnVoltageRatioChangeHandler(onVoltageRatioChange)
voltageRatioInput0.openWaitForAttachment(5000)
print(voltageRatioInput0.getMinDataInterval(),
voltageRatioInput0.getMaxDataInterval())
voltageRatioInput0.setDataInterval(100)
voltageRatioInput0.setSensorValueChangeTrigger(0.01)
try:
input("Press Enter to Stop\n")
except (Exception, KeyboardInterrupt):
pass
voltageRatioInput0.close()
def main():
global current, voltage, app, serverUpdateThread, hadPhidgetException, sessionFile
hadPhidgetException = False
voltage_sensor = None
current_sensor = None
serverUpdateThread = StoppableThread()
sessionNum = 0
with open("numSessions.txt", "r+") as numSessionsFile:
sessionNum = int(numSessionsFile.read()) + 1
print(sessionNum)
numSessionsFile.seek(0)
numSessionsFile.write(str(sessionNum))
numSessionsFile.truncate()
numSessionsFile.close()
timestamp = datetime.now()
sessionFile = open(
"Sessions/session" + str(sessionNum) + "_" + str(timestamp.month) +
"-" + str(timestamp.day) + "_" + str(timestamp.hour) + "-" +
str(timestamp.minute) + "-" + str(timestamp.second) + ".txt", "w+")
print("Session File created")
try:
voltage_sensor = VoltageInput()
current_sensor = VoltageRatioInput()
voltage_sensor.setHubPort(0)
voltage_sensor.setIsHubPortDevice(False)
voltage_sensor.setOnVoltageChangeHandler(on_new_voltage_reading)
current_sensor.setHubPort(1)
current_sensor.setIsHubPortDevice(True)
current_sensor.setOnVoltageRatioChangeHandler(on_new_current_reading)
voltage_sensor.openWaitForAttachment(1000)
current_sensor.openWaitForAttachment(1000)
serverUpdateThread.start()
atexit.register(exit_handler)
app.run(host='0.0.0.0')
voltage_sensor.close()
current_sensor.close()
except PhidgetException as e:
print(e)
hadPhidgetException = True
exit_handler(voltage_sensor, current_sensor)
except KeyboardInterrupt as key:
print(key)
exit_handler(voltage_sensor, current_sensor)
except IOError as e:
print(e)
exit_handler(voltage_sensor, current_sensor)
def main2():
global sleeptime
try:
"""
* Allocate a new Phidget Channel object
"""
ch2 = VoltageRatioInput()
"""
* Set matching parameters to specify which channel to open
"""
#You may remove this line and hard-code the addressing parameters to fit your application
#channelInfo = AskForDeviceParameters(ch)
ch2.setDeviceSerialNumber(566690)
ch2.setChannel(2)
"""
* Add event handlers before calling open so that no events are missed.
"""
#print("\n--------------------------------------")
#print("\nSetting OnAttachHandler...")
ch2.setOnAttachHandler(onAttachHandler)
#print("Setting OnDetachHandler...")
ch2.setOnDetachHandler(onDetachHandler)
#print("Setting OnErrorHandler...")
ch2.setOnErrorHandler(onErrorHandler)
#This call may be harmlessly removed
#PrintEventDescriptions()
#print("\nSetting OnVoltageRatioChangeHandler...")
ch2.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
#print("\nSetting OnSensorChangeHandler...")
ch2.setOnSensorChangeHandler(onSensorChangeHandler)
"""
* Open the channel with a timeout
"""
#print("\nOpening and Waiting for Attachment...")
try:
ch2.openWaitForAttachment(5000)
except PhidgetException as e:
PrintOpenErrorMessage(e, ch2)
raise EndProgramSignal("Program Terminated: Open Failed")
#print("Sampling data for 10 seconds...")
#print("You can do stuff with your Phidgets here and/or in the event handlers.")
time.sleep(sleeptime)
"""
* Perform clean up and exit
"""
#print("\nDone Sampling...")
#print("Cleaning up...")
ch2.close()
#print("\nExiting...")
global data
weight2 = data
datalist.clear()
return weight2
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
DisplayError(e)
traceback.print_exc()
print("Cleaning up...")
ch2.close()
return 1
except EndProgramSignal as e:
print(e)
print("Cleaning up...")
ch2.close()
return 1
except RuntimeError as e:
sys.stderr.write("Runtime Error: \n\t" + e)
traceback.print_exc()
return 1
bCur = CurrentInput()
bCur.setDeviceSerialNumber(465371)
bCur.openWaitForAttachment(1000)
if C:
# Motor C: Setup Motor Control and Motor Current
mtrC = DCMotor()
mtrC.setDeviceSerialNumber(474333)
mtrC.openWaitForAttachment(1000)
mtrC.setAcceleration(ACCEL)
cCur = CurrentInput()
cCur.setDeviceSerialNumber(474333)
cCur.openWaitForAttachment(1000)
pot = VoltageRatioInput()
pot.setDeviceSerialNumber(474333)
pot.openWaitForAttachment(1000)
pot.setOnVoltageRatioChangeHandler(joystick_movement)
pot.setVoltageRatioChangeTrigger(0.05)
root = Tk()
if A:
aCur_reading = StringVar()
if B:
bCur_reading = StringVar()
if C:
cCur_reading = StringVar()
title = Label(root, text="3 Axis Open Loop Controller", font="Courier, 14")
def main():
port = "/dev/ttyACM0"
try:
print("Trying Arduino Set Up...")
s1 = serial.Serial(port, 9600)
if s1.name == port:
current_time_struct = time.localtime()
current_time = "{}:{}:{}".format(current_time_struct[3],
current_time_struct[4],
current_time_struct[5])
s1.flushInput()
lines = []
time.sleep(1.5)
try:
with open("hx711_output.csv", newline='') as csvFile:
print("Successfully found CSV file.\n")
reader = csv.reader(csvFile)
except:
print("File does not exist, creating file.\n")
with open("hx711_output.csv", 'w') as csvFile:
writer = csv.writer(csvFile)
writer.writerows(["Time", "Weight"])
with open("hx711_output.csv", 'a') as csvFile:
print("Successfully opened CSV file for writing\n")
writer = csv.writer(csvFile)
while 1:
current_time_struct = time.localtime()
current_time = '{}:{}:{}'.format(current_time_struct[3],
current_time_struct[4],
current_time_struct[5])
if s1.in_waiting > 0:
num_bytes = s1.read(1)
print(num_bytes)
weight = s1.read(num_bytes)
print(weight)
#writer.writerows([current_time, weight])
except:
try:
print("Arduino Set Up Failed, Trying Phidget...")
ch = VoltageRatioInput()
ch.setOnAttachHandler(onAttachHandler)
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
ch.voltageRatio = 0.0
try:
print("Waiting for Attachment")
ch.openWaitForAttachment(10000)
ch.setDataInterval(10)
except PhidgetException as e:
print("Attachment Timed Out")
#time.sleep(10)
#Checks to see if enter has been pressed
readin = sys.stdin.readline()
while readin != "\n":
time.sleep(1)
ch.close()
return 0
except PhidgetException as e:
sys.stderr.write("\nExiting with error(s)...")
DisplayError(e)
traceback.print_exc()
print("Cleaning up...")
ch.close()
return 1
except RunTimeError as e:
sys.stderr.write("Runtime Error: \n\t" + e)
traceback.print_exc()
return 1
def main():
"""
* Define how long the program runs for
"""
runtime = int(input("Measure for long long: ")) # seconds
"""
* Allocate a new Phidget Channel object
"""
ch = VoltageRatioInput()
ch2 = VoltageRatioInput()
ch3 = VoltageRatioInput()
ch4 = VoltageRatioInput()
"""
* Set matching parameters to specify which channel to open
"""
ch.setDeviceSerialNumber(533379)
ch.setIsHubPortDevice(False)
ch.setChannel(0)
ch2.setDeviceSerialNumber(533379)
ch2.setIsHubPortDevice(False)
ch2.setChannel(1)
ch3.setDeviceSerialNumber(533379)
ch3.setIsHubPortDevice(False)
ch3.setChannel(2)
ch4.setDeviceSerialNumber(533379)
ch4.setIsHubPortDevice(False)
ch4.setChannel(3)
"""
* Add event handlers before calling open so that no events are missed.
"""
print("\n--------------------------------------")
ch.setOnAttachHandler(onAttachHandler)
ch2.setOnAttachHandler(onAttachHandler)
ch3.setOnAttachHandler(onAttachHandler)
ch4.setOnAttachHandler(onAttachHandler)
ch.setOnDetachHandler(onDetachHandler)
ch2.setOnDetachHandler(onDetachHandler)
ch3.setOnDetachHandler(onDetachHandler)
ch4.setOnDetachHandler(onDetachHandler)
ch.setOnErrorHandler(onErrorHandler)
ch2.setOnErrorHandler(onErrorHandler)
ch3.setOnErrorHandler(onErrorHandler)
ch4.setOnErrorHandler(onErrorHandler)
ch.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler)
ch2.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler2)
ch3.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler3)
ch4.setOnVoltageRatioChangeHandler(onVoltageRatioChangeHandler4)
"""
* Open the channel with a timeout
"""
print("\nOpening and Waiting for Attachment...")
ch.openWaitForAttachment(5000)
ch2.openWaitForAttachment(5000)
ch3.openWaitForAttachment(5000)
ch4.openWaitForAttachment(5000)
time.sleep(runtime)
"""
* Perform clean up and exit
"""
#clear the VoltageRatioChange event handler
ch.setOnVoltageRatioChangeHandler(None)
ch2.setOnVoltageRatioChangeHandler(None)
ch3.setOnVoltageRatioChangeHandler(None)
ch4.setOnVoltageRatioChangeHandler(None)
print("Cleaning up...")
ch.close()
ch2.close()
ch3.close()
ch4.close()
f1.close()
f2.close()
f3.close()
f4.close()
print("\nExiting...")
return 0
class Tunnel():
def __init__(self, tunnel_info, name, logger):
self.tunnel_info = tunnel_info
self.name = name
self.logger = logger
self.latches = {}
for name, info in self.tunnel_info.latches_info.items():
self.latches[name] = Latch(info, self.name + '_' + name + "_latch",
self.logger)
self.voltage_ratio_input = VoltageRatioInput(
self.tunnel_info.voltage_ratio_input_info,
self.name + '_load_cell', self.logger)
def open(self):
for name, latch in self.latches.items():
latch.open()
self.voltage_ratio_input.open()
def close(self):
for name, latch in self.latches.items():
latch.close()
self.voltage_ratio_input.close()
def set_on_attach_handler(self, on_attach_handler):
for name, latch in self.latches.items():
latch.set_on_attach_handler(on_attach_handler)
self.voltage_ratio_input.set_on_attach_handler(on_attach_handler)
def _on_attach_handler(self, handle):
for name, latch in self.latches.items():
if latch.has_handle(handle):
latch._on_attach_handler(handle)
return
if self.voltage_ratio_input.has_handle(handle):
self.voltage_ratio_input._on_attach_handler(handle)
def is_attached(self):
for name, latch in self.latches.items():
if not latch.is_attached():
return False
if not self.voltage_ratio_input.is_attached():
return False
return True
def set_stepper_on_change_handlers(self, stepper_on_change_handler):
for name, latch in self.latches.items():
latch.stepper_joint.stepper.set_on_position_change_handler(
stepper_on_change_handler)
latch.stepper_joint.stepper.set_on_velocity_change_handler(
stepper_on_change_handler)
def set_stepper_on_change_handlers_to_disabled(self):
for name, latch in self.latches.items():
latch.stepper_joint.stepper.set_on_position_change_handler(None)
latch.stepper_joint.stepper.set_on_velocity_change_handler(None)
def set_stepper_on_stopped_handlers(self, stepper_on_stopped_handler):
for name, latch in self.latches.items():
latch.stepper_joint.stepper.set_on_stopped_handler(
stepper_on_stopped_handler)
def set_stepper_on_stopped_handlers_to_disabled(self):
for name, latch in self.latches.items():
latch.stepper_joint.stepper.set_on_stopped_handler(None)
def set_stepper_on_homed_handlers(self, on_homed_handler):
for name, latch in self.latches.items():
latch.stepper_joint.set_on_homed_handler(on_homed_handler)
def set_limit_switch_handlers(self, limit_switch_handler):
for name, latch in self.latches.items():
latch.stepper_joint.set_limit_switch_handler(limit_switch_handler)
def home_latches(self):
for name, latch in self.latches.items():
latch.stepper_joint.home()
def all_latches_homed(self):
all_homed = True
for name, latch in self.latches.items():
if not latch.stepper_joint.homed:
all_homed = False
break
return all_homed
def any_latches_moving(self):
any_moving = False
for name, latch in self.latches.items():
if latch.stepper_joint.stepper.is_moving():
any_moving = True
break
return any_moving
def latch_all(self):
for name, latch in self.latches.items():
latch.latch()
def unlatch_all(self):
for name, latch in self.latches.items():
latch.unlatch()
def __init__(self, master, initial_name, top_name, color, sol, reg_pwr,
reg_set, reg_get, PSI):
self.frame = Frame(master, borderwidth=2, relief=SUNKEN, bg=color)
self.frame.pack()
self.master = master
self.frame_name = StringVar()
self.frame_name.set(initial_name)
self.state = 0
self.fontType = "Comic Sans"
self.activeColor = 'SpringGreen4'
self.frameColor = color
self.pressure = IntVar()
self.lock_flag = IntVar()
self.pressure.set("")
self.power = Button(self.frame,
text="PWR",
activebackground=self.activeColor,
command=lambda: self.toggle_pwr())
self.set_label = Button(self.frame,
text="SET LABEL",
font=(self.fontType, 7),
command=lambda: self.get_label_input())
self.observed_pressure = Entry(self.frame,
width=5,
state="readonly",
textvariable=self.pressure)
if self.frame_name.get() == "Hydro":
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=92,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
else:
self.set_pressure_scale = Scale(self.frame,
orient=HORIZONTAL,
from_=0,
to=50,
resolution=0.5,
bg=color,
label="Set Pressure (PSI)",
highlightthickness=0,
command=self.set_pressure)
self.custom_label = Label(self.frame,
textvariable=self.frame_name,
font=(self.fontType, 14),
bg=color)
self.label = Label(self.frame, text=initial_name, bg=color)
self.lock = Checkbutton(self.frame,
text="LOCK",
bg=color,
variable=self.lock_flag,
command=self.lock)
self.frame_name.set(top_name)
# Init the pressure scale to the default value.
self.set_pressure_scale.set(PSI)
# Lock hydo at startup
if initial_name == "Hydro":
self.lock.select()
self.set_pressure_scale.config(state="disabled")
self.power.config(state="disable")
self.frame.rowconfigure(0, minsize=30)
self.custom_label.grid(row=0, column=0, columnspan=2, sticky=S)
self.set_label.grid(column=0, row=1, columnspan=2)
self.frame.rowconfigure(2, minsize=50)
self.power.grid(column=0, row=2)
self.observed_pressure.grid(column=1, row=2)
self.set_pressure_scale.grid(column=0, row=3, columnspan=2, padx=20)
self.frame.rowconfigure(4, minsize=5)
self.label.grid(column=0, row=5)
self.lock.grid(column=1, row=5)
# Connect to Phidget Solid State Relay for solinoid control
if self.frame_name.get() == "Hydro":
self.solenoid_switch = DigitalOutput()
self.solenoid_switch.setDeviceSerialNumber(sol[0])
self.solenoid_switch.setIsHubPortDevice(False)
self.solenoid_switch.setHubPort(sol[1])
self.solenoid_switch.setChannel(sol[2])
self.solenoid_switch.openWaitForAttachment(5000)
#Connect to Phidget Solid State Relay for regulator power control
self.reg_switch = DigitalOutput()
self.reg_switch.setDeviceSerialNumber(reg_pwr[0])
self.reg_switch.setIsHubPortDevice(False)
self.reg_switch.setHubPort(reg_pwr[1])
self.reg_switch.setChannel(reg_pwr[2])
self.reg_switch.openWaitForAttachment(5000)
#Connect to Phidget Voltage Ouptut for pressure control
self.pressure_ctrl = VoltageOutput()
self.pressure_ctrl.setDeviceSerialNumber(reg_set[0])
self.pressure_ctrl.setIsHubPortDevice(False)
self.pressure_ctrl.setHubPort(reg_set[1])
self.pressure_ctrl.setChannel(reg_set[2])
self.pressure_ctrl.openWaitForAttachment(5000)
#Connect to Phidget Analog Input for pressure reading
self.pressure_reading = VoltageRatioInput()
self.pressure_reading.setDeviceSerialNumber(reg_get[0])
#One of the VINT Hubs on the SBC is used and needs special configuration
if reg_get[0] == SBCH:
self.pressure_reading.setIsHubPortDevice(True)
self.pressure_reading.setHubPort(0)
self.pressure_reading.setChannel(reg_get[1])
self.pressure_reading.openWaitForAttachment(5000)
except PhidgetException as e:
sys.stderr.write("Runtime Error -> Set Detach Handler: \n\t")
DisplayError(e)
raise
print("Setting OnErrorHandler...")
try:
ph.setOnErrorHandler(onErrorHandler)
except PhidgetException as e:
sys.stderr.write("Runtime Error -> Set Error Handler: \n\t")
DisplayError(e)
raise
return
ch = VoltageRatioInput()
ch.openWaitForAttachment(5000)
# ch.setDeviceSerialNumber(-1)
# ch.setChannel(2)
# # ch.setDataInterval(1000)
# # ch.setVoltageRatioChangeTrigger(0.0)
# SetAttachDetachError_Handlers(ch)
# SetVoltageRatioHandler(ch,onVoltageRatioChangeHandler)
# SetSensorHandler(ch,onSensorChangeHandler)
# OpenPhidgetChannel_waitForAttach(ch,5000)
state = ch.getVoltageRatio()
print(state)
from Phidget22.Phidget import *
from Phidget22.Devices.VoltageRatioInput import *
print("testing")
ch1 = VoltageRatioInput()
ch1.setChannel(1)
ch1.openWaitForAttachment(1000)
ch2=VoltageRatioInput()
ch2.setChannel(2)
ch2.openWaitForAttachment(1000)
ch3 = VoltageRatioInput()
ch3.setChannel(0)
ch3.openWaitForAttachment(1000)
excitationvoltage=-10000 / 0.0459
while True:
voltageRatio1 = excitationvoltage*ch1.getVoltageRatio() +1.3
voltageRatio2 = excitationvoltage*ch2.getVoltageRatio() +1.3
voltageRatio3 = excitationvoltage*ch3.getVoltageRatio() +1.3 + 2.5
bucket1=voltageRatio1+voltageRatio2+voltageRatio3
print(bucket1)
ch1.close()
import time
from Phidget22.Devices.VoltageRatioInput import *
from Phidget22.PhidgetException import *
from Phidget22.Phidget import *
from Phidget22.Net import *
#%% Paul DeTrempe8, Hybrid rocket load cell data collection script
# Big shoutout to Phidget for writing 90% of this
# Change data collection time duration in %%Collect Data section
# Change output text file name in %%Store Voltage Ratios section
# define storage vector of voltage ratios
Vratios = [0.0]
try:
ch = VoltageRatioInput()
#ch.open()
except RuntimeError as e:
print("Runtime Exception %s" % e.details)
print("Press Enter to Exit...\n")
readin = sys.stdin.read(1)
exit(1)
def VoltageRatioInputAttached(e):
try:
attached = e
print("\nAttach Event Detected (Information Below)")
print("===========================================")
print("Library Version: %s" % attached.getLibraryVersion())
print("Serial Number: %d" % attached.getDeviceSerialNumber())
def main():
ir_reflective_sensor = VoltageRatioInput()
ir_reflective_sensor.setChannel(5)
ir_reflective_sensor.setOnSensorChangeHandler(on_ir_change)
ir_reflective_sensor.openWaitForAttachment(5000)
ir_reflective_sensor.setSensorType(VoltageRatioSensorType.SENSOR_TYPE_1103)
sharp_distance_sensor_left = VoltageRatioInput()
sharp_distance_sensor_left.setChannel(6)
sharp_distance_sensor_left.setOnSensorChangeHandler(on_sharp_change)
sharp_distance_sensor_left.openWaitForAttachment(5000)
sharp_distance_sensor_left.setSensorType(
VoltageRatioSensorType.SENSOR_TYPE_1101_SHARP_2Y0A21)
sharp_distance_sensor_right = VoltageRatioInput()
sharp_distance_sensor_right.setChannel(7)
sharp_distance_sensor_right.setOnSensorChangeHandler(on_sharp_change)
sharp_distance_sensor_right.openWaitForAttachment(5000)
sharp_distance_sensor_right.setSensorType(
VoltageRatioSensorType.SENSOR_TYPE_1101_SHARP_2Y0A21)
while True:
pass
ir_reflective_sensor.close()
sharp_distance_sensor_left.close()
sharp_distance_sensor_right.close()
class jigCurrent(object):
'''current sensor'''
def __init__(self, provider, channel):
self.ai = VoltageRatioInput()
self.ai.setDeviceSerialNumber(provider)
self.ai.setChannel(channel)
self.ai.setOnAttachHandler(self._attached)
self.ai.openWaitForAttachment(1000)
def _attached(self, event):
self.ai.setSensorType(VoltageRatioSensorType.SENSOR_TYPE_1122_DC)
self.ai.setDataInterval(100)
self.ai.setVoltageRatioChangeTrigger(0)
@property
def current(self):
return self.ai.getSensorValue()
@property
def unitInfo(self):
return self.ai.getSensorUnit()