def createScene(self):
self.rootEntity = Qt3DCore.QEntity()
self.scannerEntity = Qt3DCore.QEntity(self.rootEntity)
# QSceneLoader loads materials from scanner.mtl referenced in scanner.obj
self.scanner = Qt3DRender.QSceneLoader(self.scannerEntity)
self.scanner.setSource(QUrl.fromLocalFile("scanner.obj"))
self.scannerEntity.addComponent(self.scanner)
self.addTransform()
def __init__(self, parentEntity):
super(Cube, self).__init__()
# build the cube
side = 15
self.cubeEntity = Qt3DCore.QEntity(parentEntity)
# init params of the 6 planes
planeTranslations = [[0, -side / 2, 0], [0, +side / 2, 0],
[-side / 2, 0, 0], [+side / 2, 0, 0],
[0, 0, -side / 2], [0, 0, +side / 2]]
planeRotations = [[0, 0, 180], [0, 0, 0], [0, 0, 90], [0, 0, 270],
[270, 0, 0], [90, 0, 0]]
# allocate planes
self.planeEntities = [None for i in range(6)]
self.planeMeshes = [None for i in range(6)]
self.planeTransforms = [None for i in range(6)]
self.materials = [None for i in range(6)]
# build the planes
for i in range(0, 6):
self.planeMeshes[i] = Qt3DExtras.QPlaneMesh()
self.planeMeshes[i].setWidth(side)
self.planeMeshes[i].setHeight(side)
self.planeTransforms[i] = Qt3DCore.QTransform()
self.planeTransforms[i].setRotationX(planeRotations[i][0])
self.planeTransforms[i].setRotationY(planeRotations[i][1])
self.planeTransforms[i].setRotationZ(planeRotations[i][2])
self.planeTransforms[i].setTranslation(
QVector3D(planeTranslations[i][0], planeTranslations[i][1],
planeTranslations[i][2]))
self.materials[i] = Qt3DExtras.QPhongMaterial(self.cubeEntity)
self.materials[i].setAmbient(
QColor(random.randint(0, 255), random.randint(0, 255),
random.randint(0, 255)))
self.planeEntities[i] = Qt3DCore.QEntity(self.cubeEntity)
self.planeEntities[i].addComponent(self.planeMeshes[i])
self.planeEntities[i].addComponent(self.planeTransforms[i])
self.planeEntities[i].addComponent(self.materials[i])
#initial rotation
self.yaw = -15
self.pitch = 15
self.yawSpeed = 0
self.pitchSpeed = 0
self.cubeTransform = Qt3DCore.QTransform()
self.cubeEntity.addComponent(self.cubeTransform)
self.rotate(
0, 0
) #trigger the computation of the rotation matrix for the initial rotation
def showAll(self):
self.rootEntity = Qt3DCore.QEntity()
self.materialSquare = Qt3DExtras.QPhongMaterial(self.rootEntity)
self.materialSphere = Qt3DExtras.QPhongMaterial(self.rootEntity)
# self.material = Qt3DExtras.QPhongMaterial(self.rootEntity)
with open('local2.csv', 'r') as file:
reader = csv.reader(file)
for row in reader:
if row[0] == 's':
self.sphereEntity = Qt3DCore.QEntity(self.rootEntity)
self.sphereMesh = Qt3DExtras.QSphereMesh()
self.name = row[1]
self.materialSphere.setAmbient(
QColor(int(row[2]), int(row[3]), int(row[4]),
int(row[5])))
self.sphereMesh.setRadius(int(row[6]))
self.QTransformSphere = Qt3DCore.QTransform()
self.sphereEntity.addComponent(self.sphereMesh)
self.sphereEntity.addComponent(self.materialSphere)
self.sphereEntity.addComponent(self.QTransformSphere)
sphereVector3D = QVector3D()
sphereVector3D.setX(int(row[7]))
sphereVector3D.setY(int(row[8]))
sphereVector3D.setZ(int(row[9]))
self.QTransformSphere.setTranslation(sphereVector3D)
else:
self.squareEntity = Qt3DCore.QEntity(self.rootEntity)
self.squareMesh = Qt3DExtras.QCuboidMesh()
self.name = row[1]
self.materialSquare.setAmbient(
QColor(int(row[2]), int(row[3]), int(row[4]),
int(row[5])))
self.squareMesh.setXExtent(int(row[6]))
self.squareMesh.setYExtent(int(row[7]))
self.squareMesh.setZExtent(int(row[8]))
self.QTransformSquare = Qt3DCore.QTransform()
self.squareEntity.addComponent(self.squareMesh)
self.squareEntity.addComponent(self.materialSquare)
self.squareEntity.addComponent(self.QTransformSquare)
squareVector3D = QVector3D()
squareVector3D.setX(int(row[9]))
squareVector3D.setY(int(row[10]))
squareVector3D.setZ(int(row[11]))
self.QTransformSquare.setTranslation(squareVector3D)
self.QTransformSquare.setRotationX(int(row[12]))
self.QTransformSquare.setRotationY(int(row[13]))
self.QTransformSquare.setRotationZ(int(row[14]))
def __init__(self):
super().__init__()
#store objects into array
self.i = 0
self.listOfObjects = []
with open('local2.csv', 'r') as file:
reader = csv.reader(file)
for row in reader:
self.listOfObjects.append(row)
print(self.listOfObjects)
# Camera
self.camera().lens().setPerspectiveProjection(45, 16 / 9, 0.1, 1000)
#setting focus on selected object
if self.listOfObjects[0][0] == 's':
self.camera().setPosition(
QVector3D(int(row[7]), int(row[8]), 50 + int(row[9])))
self.camera().setViewCenter(
QVector3D(int(row[7]), int(row[8]), int(row[9])))
else:
self.camera().setPosition(
QVector3D(int(row[9]), int(row[10]), 50 + int(row[11])))
self.camera().setViewCenter(
QVector3D(int(row[9]), int(row[10]), int(row[11])))
# For camera controls
self.rootEntity = Qt3DCore.QEntity()
self.showAll()
self.camController = Qt3DExtras.QOrbitCameraController(self.rootEntity)
self.camController.setLinearSpeed(50)
self.camController.setLookSpeed(180)
self.camController.setCamera(self.camera())
self.setRootEntity(self.rootEntity)
def createScene(self):
# Root entity
self.rootEntity = Qt3DCore.QEntity()
# Material
self.material = Qt3DExtras.QPhongMaterial(self.rootEntity)
# Torus
self.torusEntity = Qt3DCore.QEntity(self.rootEntity)
self.torusMesh = Qt3DExtras.QTorusMesh()
self.torusMesh.setRadius(5)
self.torusMesh.setMinorRadius(1)
self.torusMesh.setRings(100)
self.torusMesh.setSlices(20)
self.torusTransform = Qt3DCore.QTransform()
self.torusTransform.setScale3D(QVector3D(1.5, 1, 0.5))
self.torusTransform.setRotation(
QQuaternion.fromAxisAndAngle(QVector3D(1, 0, 0), 45))
self.torusEntity.addComponent(self.torusMesh)
self.torusEntity.addComponent(self.torusTransform)
self.torusEntity.addComponent(self.material)
# Sphere
self.sphereEntity = Qt3DCore.QEntity(self.rootEntity)
self.sphereMesh = Qt3DExtras.QSphereMesh()
self.sphereMesh.setRadius(3)
self.sphereTransform = Qt3DCore.QTransform()
self.controller = OrbitTransformController(self.sphereTransform)
self.controller.setTarget(self.sphereTransform)
self.controller.setRadius(20)
self.sphereRotateTransformAnimation = QPropertyAnimation(
self.sphereTransform)
self.sphereRotateTransformAnimation.setTargetObject(self.controller)
self.sphereRotateTransformAnimation.setPropertyName("angle")
self.sphereRotateTransformAnimation.setStartValue(0)
self.sphereRotateTransformAnimation.setEndValue(360)
self.sphereRotateTransformAnimation.setDuration(10000)
self.sphereRotateTransformAnimation.setLoopCount(-1)
self.sphereRotateTransformAnimation.start()
self.sphereEntity.addComponent(self.sphereMesh)
self.sphereEntity.addComponent(self.sphereTransform)
self.sphereEntity.addComponent(self.material)
def create_qentity(components: List[Qt3DCore.QComponent],
parent=None) -> Qt3DCore.QEntity:
"""
Creates a QEntity and gives it all of the QComponents that are contained in a list.
"""
entity = Qt3DCore.QEntity(parent)
for component in components:
entity.addComponent(component)
return entity
def __init__(self, view: Qt3DExtras.Qt3DWindow) -> None:
"""
Initialize a new instance.
Args:
view: where to render the planetary sphere.
"""
self.root_entity = Qt3DCore.QEntity()
ce = self.camera_entity = view.camera()
ce.lens().setPerspectiveProjection(45.0, 1.0, 0.1, 1000.0)
ce.setPosition(V3(0, 8, 8))
ce.setUpVector(V3(0, 1, 0))
ce.setViewCenter(V3(0, 0, 0))
self.light = Qt3DCore.QEntity(self.root_entity)
self.point_light = Qt3DRender.QPointLight(self.light)
self.point_light.setColor("white")
self.point_light.setIntensity(1.0)
self.light.addComponent(self.point_light)
# Move the light to the camera's position - on-camera 'flash'!
t = self.light_transform = Qt3DCore.QTransform(self.light)
t.setTranslation(ce.position())
self.light.addComponent(t)
self.mesh = Qt3DExtras.QSphereMesh()
self.mesh.setRings(30)
self.mesh.setSlices(30)
self.mesh.setRadius(2)
t = self.transform = Qt3DCore.QTransform()
t.setScale(1.3)
t.setTranslation(V3(0.0, 0.0, 0.0))
m = self.material = Qt3DExtras.QDiffuseSpecularMaterial()
m.setAmbient(QColor(200, 200, 255))
m.setShininess(20.0)
self.entity = Qt3DCore.QEntity(self.root_entity)
self.entity.addComponent(self.mesh)
self.entity.addComponent(self.material)
self.entity.addComponent(self.transform)
view.setRootEntity(self.root_entity)
self.entity.setEnabled(True)
def add_acq_sphere(self, df, label):
pos = df.loc[label, ["x", "y", "z"]].values*1000 # m to mm
if label not in self.acq_coordinate_entities:
self.acq_coordinate_meshes[label] = Qt3DExtras.QSphereMesh(rings=20, slices=20, radius=3)
self.acq_coordinate_entities[label] = Qt3DCore.QEntity(self.root_entity)
self.acq_coordinate_transforms[label] = Qt3DCore.QTransform(self.acq_coordinate_meshes[label])
self.acq_coordinate_entities[label].addComponent(self.acq_coordinate_meshes[label])
self.acq_coordinate_entities[label].addComponent(self.acq_coordinate_transforms[label])
self.acq_coordinate_entities[label].addComponent(self.acq_material)
self.acq_coordinate_transforms[label].setTranslation(QtGui.QVector3D(*pos))
def __init__(self, type, parent):
super(Node, self).__init__()
parentEntity = parent.entity() if parent else None
self._entity = Qt3DCore.QEntity(parentEntity)
self._id = Node.Id
Node.Id += 1
self._type = type
self._parent = parent
self._children = [] # C++: QList<Node*>
self._components = {} # C++: QHash<ComponentType, Component*>
self._propertyMap = [] # C++: QList<NodeProperty*>
self._componentMap = [] # C++: QList<Component*>
if parent is not None:
parent.addChild(self)
def createScene(self):
# Root entity
self.rootEntity = Qt3DCore.QEntity()
# Material
self.material = Qt3DExtras.QPhongMaterial(self.rootEntity)
# Torus
self.torusEntity = Qt3DCore.QEntity(self.rootEntity)
self.torusMesh = Qt3DExtras.QTorusMesh()
self.torusMesh.setRadius(5)
self.torusMesh.setMinorRadius(1)
self.torusMesh.setRings(100)
self.torusMesh.setSlices(20)
self.torusTransform = Qt3DCore.QTransform()
self.torusTransform.setScale3D(QVector3D(1.5, 1, 0.5))
self.torusTransform.setRotation(
QQuaternion.fromAxisAndAngle(QVector3D(1, 0, 0), 45))
self.torusEntity.addComponent(self.torusMesh)
self.torusEntity.addComponent(self.torusTransform)
self.torusEntity.addComponent(self.material)
# Sphere
self.sphereEntity = Qt3DCore.QEntity(self.rootEntity)
self.sphereMesh = Qt3DExtras.QSphereMesh()
self.sphereMesh.setRadius(3)
self.sphereTransform = Qt3DCore.QTransform()
self.controller = OrbitTransformController(self.sphereTransform)
self.controller.setTarget(self.sphereTransform)
self.controller.setRadius(20)
self.sphereEntity.addComponent(self.sphereMesh)
self.sphereEntity.addComponent(self.sphereTransform)
self.sphereEntity.addComponent(self.material)
def __init__(self):
super(Cube3DWindow, self).__init__()
# Root entity
self.rootEntity = Qt3DCore.QEntity()
self.setRootEntity(self.rootEntity)
# Camera
self.camera().lens().setPerspectiveProjection(45, 16 / 9, 0.1, 1000)
self.camera().setPosition(QVector3D(0, 0, 40))
self.camera().setViewCenter(QVector3D(0, 0, 0))
self.mouseLastPos = QPoint()
self.mouseDown = False
self.timer = QTimer(self)
self.timer.timeout.connect(self.onTimer)
def importerLoaded(self, status):
if status != Kuesa.GLTF2Importer.Status.Ready:
return
# First let's take the components that we are going to use to create our clones
parent = self.rootEntity.entity("KuesaEntity_0")
parent.setObjectName("KuesaEntity_0")
orig_entity = self.rootEntity.entity("KuesaEntity_2").childNodes()[1]
orig_geometry = orig_entity.childNodes()[0]
orig_material = orig_entity.childNodes()[1]
row = 10
col = 10
distance = 200
r = 500
# Then create clones by giving them a custom transform, and the same components than before
for i in range(0, col):
for j in range(0, row):
new_entity = Qt3DCore.QEntity(parent)
# Note : there is an inconsistency in the Python bindings -
# In C++ it is not necessary to assign a parent to the transform.
new_transform = Qt3DCore.QTransform(new_entity)
new_material = self.cloneMaterial(orig_material, new_entity)
new_material.setEffect(orig_material.effect())
new_props = new_material.metallicRoughnessProperties()
new_props.setMetallicFactor(i / col)
new_props.setRoughnessFactor(j / row)
dt = QVector3D(i * distance, j * distance, 0)
new_transform.setTranslation(dt)
# Add the custom transform to the entity
new_entity.addComponent(new_transform)
# Add the material we created
new_entity.addComponent(new_material)
# These two components will be shared across all the ducks.
new_entity.addComponent(orig_geometry)
def add_sphere(self, radius, x, y, z, rings=10, slices=10):
sphereEntity = Qt3DCore.QEntity(self.rootEntity)
# Mesh
sphereMesh = Qt3DExtras.QSphereMesh()
sphereMesh.setRadius(radius)
sphereMesh.setRings(rings)
sphereMesh.setSlices(slices)
# Transforms
sphereTransform = Qt3DCore.QTransform()
sphereTransform.setTranslation(QVector3D(x, y, z))
sphereEntity.addComponent(sphereMesh)
sphereEntity.addComponent(self.material)
sphereEntity.addComponent(sphereTransform)
self.spheres.append(sphereEntity)
self.meshes.append(sphereMesh)
self.transforms.append(sphereTransform)
def importerLoaded(self, status):
if status != Kuesa.GLTF2Importer.Status.Ready:
return
# First let's take the components that we are going to use to create our clones
parent = self.rootEntity.entity("KuesaEntity_0")
parent.setObjectName("KuesaEntity_0")
orig_entity = self.rootEntity.entity("KuesaEntity_2").childNodes()[1]
orig_geometry = orig_entity.childNodes()[0]
orig_material = orig_entity.childNodes()[1]
self.ducks = 1000
r = 500
# Then create clones by giving them a custom transform, and the same components than before
for i in range(0, self.ducks):
new_entity = Qt3DCore.QEntity(parent)
# Note : there is an inconsistency in the Python bindings -
# In C++ it is not necessary to assign a parent to the transform.
new_transform = Qt3DCore.QTransform(new_entity)
new_transform.setScale(0.2)
dt = QVector3D(random.randint(-r, r), random.randint(-r, r),
random.randint(-r, r))
new_transform.setTranslation(dt)
new_transform.setRotationX(random.randint(0, 360))
new_transform.setRotationY(random.randint(0, 360))
new_transform.setRotationZ(random.randint(0, 360))
# Add the custom transform, plus the original components, to the entity
new_entity.addComponent(new_transform)
# These two components will be shared across all the ducks.
new_entity.addComponent(orig_geometry)
new_entity.addComponent(orig_material)
def __init__(self, parent):
super().__init__()
self.root_entity = Qt3DCore.QEntity()
# Make additional entities for the gnomon and instrument components
self.combined_component_axes_entity = Qt3DCore.QEntity(
self.root_entity)
self.component_root_entity = Qt3DCore.QEntity(
self.combined_component_axes_entity)
self.axes_root_entity = Qt3DCore.QEntity(
self.combined_component_axes_entity)
self.gnomon_root_entity = Qt3DCore.QEntity(self.root_entity)
# Create the 3DWindow and place it in a widget with a layout
lay = QVBoxLayout(self)
self.view = InstrumentZooming3DWindow(self.component_root_entity)
self.view.defaultFrameGraph().setClearColor(QColor("lightgrey"))
self.view.setRootEntity(self.root_entity)
container = QWidget.createWindowContainer(self.view)
lay.addWidget(container)
# Set the properties of the instrument camera controller
camera_entity = self.view.camera()
cam_controller = Qt3DExtras.QFirstPersonCameraController(
self.root_entity)
cam_controller.setLinearSpeed(20)
cam_controller.setCamera(camera_entity)
# Enable the camera to see a large distance by giving it a small nearView and large farView
self.view.camera().lens().setPerspectiveProjection(
45, 16 / 9, 0.01, 1000)
# Set the camera view centre as the origin and position the camera so that it looks down at the initial sample
self.view.camera().setPosition(QVector3D(6, 8, 30))
self.view.camera().setViewCenter(QVector3D(0, 0, 0))
# Make sure that the size of the gnomon stays the same when the 3D view is resized
self.view.heightChanged.connect(self.update_gnomon_size)
self.view.widthChanged.connect(self.update_gnomon_size)
# Keep a reference to the gnomon viewport so that it can be resized to preserve the original size of the gnomon
self.gnomon_viewport = None
# Choose a fixed height and width for the gnomon so that this can be preserved when the 3D view is resized
self.gnomon_height = self.gnomon_width = 140
# Create the gnomon resources
self.gnomon = Gnomon(self.gnomon_root_entity, self.view.camera())
# Create the axes lines objects
InstrumentViewAxes(self.axes_root_entity,
self.view.camera().farPlane())
# Dictionary of components and transformations so that we can delete them later
self.component_entities: Dict[str, EntityCollection] = {}
self.transformations = {}
# Create layers in order to allow one camera to only see the gnomon and one camera to only see the
# components and axis lines
self.create_layers()
self.initialise_view()
# Insert the beam cylinder last. This ensures that the semi-transparency works correctly.
self.gnomon.setup_beam_cylinder()
# Move the gnomon when the camera view changes
self.view.camera().viewVectorChanged.connect(self.gnomon.update_gnomon)
def __init__(self):
super(Window, self).__init__()
# Default set-up - by now you know the drill :-)
self.rootEntity = Kuesa.SceneEntity()
self.rootEntity.addComponent(DefaultEnvMap(self.rootEntity))
self.gltfImporter = Kuesa.GLTF2Importer(self.rootEntity)
self.gltfImporter.setSceneEntity(self.rootEntity)
self.gltfImporter.setSource(assetsUrl() + "/models/duck/Duck.glb")
self.camera().setPosition(QVector3D(10, 1.5, 10))
self.camera().setViewCenter(QVector3D(0, .5, 0))
self.camera().setUpVector(QVector3D(0, 1, 0))
self.camera().setAspectRatio(16. / 9.)
self.camController = Qt3DExtras.QOrbitCameraController(self.rootEntity)
self.camController.setCamera(self.camera())
self.fg = Kuesa.ForwardRenderer()
self.fg.setCamera(self.camera())
self.fg.setClearColor("white")
self.setActiveFrameGraph(self.fg)
envmap_root = assetsUrl() + "/envmaps/pink_sunrise"
envmap_name = "pink_sunrise" + ("_16f" if platform.system() == "Darwin"
else "") + "_radiance"
self.skybox = Kuesa.Skybox(self.rootEntity)
self.skybox.setBaseName(envmap_root + "/" + envmap_name)
self.skybox.setExtension(".dds")
# Now we create some lights.
# All lights have an intensity and a color.
# Specific light types have relevant additional properties.
# Point light
self.pointLightEntity = Qt3DCore.QEntity(self.rootEntity)
self.pointLightTransform = Qt3DCore.QTransform(self.pointLightEntity)
self.pointLightTransform.setTranslation(QVector3D(20, -10, -10))
self.pointLight = Kuesa.PointLight(self.pointLightEntity)
self.pointLight.setIntensity(1000.0)
self.pointLight.setColor("red")
self.pointLightEntity.addComponent(self.pointLightTransform)
self.pointLightEntity.addComponent(self.pointLight)
# Spot light
self.spotLightEntity = Qt3DCore.QEntity(self.rootEntity)
self.spotLightTransform = Qt3DCore.QTransform(self.spotLightEntity)
self.spotLightTransform.setTranslation(QVector3D(-10, 10, 10))
self.spotLight = Kuesa.SpotLight(self.spotLightEntity)
self.spotLight.setIntensity(1000.0)
self.spotLight.setColor("green")
self.spotLight.setInnerConeAngle(50)
self.spotLight.setOuterConeAngle(100)
self.spotLight.setRange(1000)
self.spotLightEntity.addComponent(self.spotLightTransform)
self.spotLightEntity.addComponent(self.spotLight)
# Directional light
self.directionalLightEntity = Qt3DCore.QEntity(self.rootEntity)
self.directionalLightTransform = Qt3DCore.QTransform(
self.directionalLightEntity)
self.directionalLight = Kuesa.DirectionalLight(
self.directionalLightEntity)
self.directionalLight.setIntensity(100.0)
self.directionalLight.setColor("blue")
self.directionalLight.setDirection(QVector3D(10, 10, -10))
self.directionalLightEntity.addComponent(
self.directionalLightTransform)
self.directionalLightEntity.addComponent(self.directionalLight)
self.setRootEntity(self.rootEntity)
def __init__(self, parent, fs_subject="sample"):
super(MeshDisplayWidget, self).__init__(parent)
self.config = parent.config
self.fs_subject = fs_subject
self.view = Qt3DExtras.Qt3DWindow()
self.view.defaultFrameGraph().setClearColor(QtGui.QColor("#4d4d4f"))
self.container = QtWidgets.QWidget.createWindowContainer(self.view, self)
screen_size = self.view.screen().size()
self.container.setMinimumSize(QtCore.QSize(600, 100))
self.container.setMaximumSize(screen_size)
#h_layout = QtWidgets.QHBoxLayout(self)
#h_layout.addWidget(self.container)
self.addWidget(self.container)
self.tableView = QtWidgets.QTableView(self)
self.tableView.setObjectName("tableView")
v_layout = QtWidgets.QVBoxLayout()
v_layout.addWidget(self.tableView)
self.overlay_btn = QtWidgets.QPushButton("Update and overlay digitized points")
self.overlay_btn.clicked.connect(self.update_acquisition_overlay)
v_layout.addWidget(self.overlay_btn)
subject_name_layout = QtWidgets.QHBoxLayout()
subject_name_layout.addWidget(QtWidgets.QLabel("Subject name:"))
self.subject_name_wgt = QtWidgets.QComboBox()
subject_name_layout.addWidget(self.subject_name_wgt)
self.new_subject_wgt = QtWidgets.QPushButton("New subject")
self.new_subject_wgt.clicked.connect(self.new_subject)
subject_name_layout.addWidget(self.new_subject_wgt)
self.mute_sound_wgt = QtWidgets.QCheckBox("Mute sound")
subject_name_layout.addWidget(self.mute_sound_wgt)
v_layout.addLayout(subject_name_layout)
if "subject_dir" not in self.config["DEFAULT"]:
self.config["DEFAULT"]["subject_dir"] = str(Path(__file__).parent.absolute() / "subjects_data")
subject_dir_layout = QtWidgets.QHBoxLayout()
subject_dir_layout.addWidget(QtWidgets.QLabel("Subject dir:"))
self.subject_dir_wgt = QtWidgets.QLineEdit(self.config["DEFAULT"]["subject_dir"])
self.subject_dir_wgt.setReadOnly(False)
subject_dir_layout.addWidget(self.subject_dir_wgt)
select_subject_dir_btn = QtWidgets.QPushButton("...")
subject_dir_layout.addWidget(select_subject_dir_btn)
select_subject_dir_btn.clicked.connect(self.open_subject_dir_dlg)
v_layout.addLayout(subject_dir_layout)
self.subject_dir_wgt.textChanged.connect(self.set_subject_dir)
if not Path(self.config["DEFAULT"]["subject_dir"]).exists():
msgBox = QtWidgets.QMessageBox()
msgBox.setIcon(QtWidgets.QMessageBox.Information)
msgBox.setText(f"The chosen subject directory (i.e. {self.config['DEFAULT']['subject_dir']}) does not "
"exist. Do you want to create it or to select a new directory?")
msgBox.setWindowTitle("Non-existent subject directory")
button_create = msgBox.addButton("Create it!", QtWidgets.QMessageBox.YesRole);
msgBox.addButton("Select a different directory", QtWidgets.QMessageBox.NoRole)
msgBox.exec_()
if msgBox.clickedButton() == button_create:
Path(self.config["DEFAULT"]["subject_dir"]).mkdir(exist_ok=True, parents=True)
else:
self.open_subject_dir_dlg()
#h_layout.addLayout(v_layout)
v_layout_widget = QtWidgets.QWidget(self)
v_layout_widget.setLayout(v_layout)
self.addWidget(v_layout_widget)
self.data = QtCore.QUrl.fromLocalFile(str(Path(__file__).parent.absolute() / f"{self.fs_subject}_head.obj"))
self.root_entity = Qt3DCore.QEntity()
self.material = Qt3DExtras.QPhongMaterial()
self.material.setDiffuse(QtGui.QColor(254, 254, 254))
self.camera = self.view.camera()
self.camera.lens().setPerspectiveProjection(400.0, 16.0/9.0, 100, 1200.0)
self.camera.setPosition(QtGui.QVector3D(0, 500, 0))
self.camera.setUpVector(QtGui.QVector3D(0, 0, 1))
self.lightEntities = {}
self.lights = {}
self.lightTransforms = {}
for trans_x in [200, -200]:
for trans_y in [200, -200]:
self.lightEntities[(trans_x, trans_y)] = Qt3DCore.QEntity(self.root_entity)
self.lights[(trans_x, trans_y)] = Qt3DRender.QPointLight(self.lightEntities[(trans_x, trans_y)])
self.lights[(trans_x, trans_y)].setColor("white")
self.lights[(trans_x, trans_y)].setIntensity(0.4)
self.lightEntities[(trans_x, trans_y)].addComponent(self.lights[(trans_x, trans_y)])
self.lightTransforms[(trans_x, trans_y)] = Qt3DCore.QTransform(self.lightEntities[(trans_x, trans_y)])
self.lightTransforms[(trans_x, trans_y)].setTranslation(QtGui.QVector3D(trans_x, trans_y, 100.0))
self.lightEntities[(trans_x, trans_y)].addComponent(self.lightTransforms[(trans_x, trans_y)])
# Get co-registered head, fiducials and electrodes
data_path = Path(mne.datasets.sample.data_path())
fs_subjects_dir = data_path / 'subjects'
trans_fname = data_path / 'MEG' / 'sample' / 'sample_audvis_raw-trans.fif'
trans = mne.read_trans(trans_fname)
montage = mne.channels.make_standard_montage('GSN-HydroCel-129')
info = mne.create_info(montage.ch_names, 100, ch_types='eeg')
raw = mne.io.RawArray(np.zeros((len(montage.ch_names), 100)), info)
raw.set_montage(montage)
eeg, fid, surf = get_aligned_artifacts(raw.info, subject=self.fs_subject, trans=trans,
subjects_dir=fs_subjects_dir, coord_frame='mri')
self.head_surf = surf
path_out = Path(str(Path(__file__).parent.absolute() / f"{self.fs_subject}_head.obj"))
if True: #not path_out.exists():
mesh = trimesh.Trimesh(surf["rr"] * 1000, surf["tris"])
open3d_mesh = open3d.geometry.TriangleMesh(vertices=open3d.utility.Vector3dVector(mesh.vertices),
triangles=open3d.utility.Vector3iVector(mesh.faces))
mesh = open3d_mesh.simplify_quadric_decimation(int(20000))
mesh = trimesh.Trimesh(np.asarray(mesh.vertices), np.asarray(mesh.triangles))
with path_out.open('w') as file_obj:
file_obj.write(trimesh.exchange.obj.export_obj(mesh))
# Head
self.data = QtCore.QUrl.fromLocalFile(str(path_out))
self.head_entity = Qt3DCore.QEntity(self.root_entity)
self.head_mesh = Qt3DRender.QMesh()
self.head_mesh.setMeshName(str(path_out))
self.head_mesh.setSource(self.data)
self.head_entity.addComponent(self.head_mesh)
self.head_entity.addComponent(self.material)
self.camController = Qt3DExtras.QOrbitCameraController(self.head_mesh)
self.camController.setCamera(self.camera)
self.camController.setLinearSpeed(self.camController.linearSpeed()*100)
self.mesh_center_of_mass = np.median(surf['rr'], 0)*1000
self.camera.setViewCenter(QtGui.QVector3D(*(self.mesh_center_of_mass)))
self.camera.viewCenterChanged.connect(self.cam_view_center_changed)
## EEG electrodes and Fiducials
self.electrode_material = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#665423"))
self.fid_material = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#0000FF"))
self.selected_material = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#FF0000"))
self.edited_material = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#FFFF00"))
self.acq_material = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#00FF00"))
self.selected_item = None
self.coordinate_meshes = {}
self.coordinate_entities = {}
self.coordinate_transforms = {}
self.coordinate_materials = {}
for kind, var in zip(["fid", "elec"], [fid, eeg]):
for label, pos in var.iterrows():
pos = pos.values*1000
self.coordinate_meshes[label] = Qt3DExtras.QSphereMesh(rings=20, slices=20, radius=3)
self.coordinate_entities[label] = Qt3DCore.QEntity(self.root_entity)
self.coordinate_transforms[label] = Qt3DCore.QTransform(self.coordinate_meshes[label])
self.coordinate_transforms[label].setTranslation(QtGui.QVector3D(*pos))
self.coordinate_entities[label].addComponent(self.coordinate_meshes[label])
self.coordinate_entities[label].addComponent(self.coordinate_transforms[label])
self.acq_coordinate_meshes = {}
self.acq_coordinate_entities = {}
self.acq_coordinate_transforms = {}
self.df_montage = pd.concat([fid, eeg])
self.df_montage.columns = ["x", "y", "z"]
self.df_acq = pd.concat([self.df_montage.copy().rename(columns={"x": f"x{i+1}", "y": f"y{i+1}", "z": f"z{i+1}"})
for i in range(4)], axis=1)
model = DataFrameModel(self.df_acq)
self.tableView.setModel(model)
self.df_acq.loc[:, :] = np.nan
self.set_table_view_selection(0)
self.view.setRootEntity(self.root_entity)
self.subject_name_wgt.currentTextChanged.connect(self.load_subject)
self.update_subject_lst()
def createScene(self):
# Root entity
self.rootEntity = Qt3DCore.QEntity()
# Material
self.material = Qt3DExtras.QPhongMaterial(self.rootEntity)
def __init__(self, parent=None):
super().__init__(parent)
self.rnd_lat = random.randrange(5200,5300) / 100.0
self.rnd_hdg = random.randrange(-300,300) / 100.0
self.rnd_dec = random.randrange(-50,50) / 10.0
print(self.rnd_lat, self.rnd_hdg, self.rnd_dec)
self.view = Qt3DExtras.Qt3DWindow()
self.view.defaultFrameGraph().setClearColor(QtGui.QColor("#4d4d4f"))
self.container = QtWidgets.QWidget.createWindowContainer(self.view)
self.vLayout = QtWidgets.QVBoxLayout(self)
self.vLayout.addWidget(self.container, 1)
self.input_aspect = Qt3DInput.QInputAspect()
self.view.registerAspect(self.input_aspect)
self.rootEntity = Qt3DCore.QEntity()
self.view.setRootEntity(self.rootEntity)
###
cameraEntity = self.view.camera()
cameraEntity.lens().setPerspectiveProjection(5.0, 16.0 / 9.0, 10, 100000.0)
cameraEntity.setPosition(QtGui.QVector3D(0, 1000, 50000))
cameraEntity.setUpVector(QtGui.QVector3D(0, 1, 0))
cameraEntity.setViewCenter(QtGui.QVector3D(0, 1000, 0))
self.camController = Qt3DExtras.QOrbitCameraController(self.rootEntity)
self.camController.setCamera(cameraEntity)
###
self.lightEntity = Qt3DCore.QEntity(self.rootEntity)
self.light = Qt3DRender.QPointLight(self.lightEntity)
self.light.setColor("white")
self.light.setIntensity(1)
self.lightTransform = Qt3DCore.QTransform(self.lightEntity)
self.lightTransform.setTranslation(cameraEntity.position())
self.lightEntity.addComponent(self.light)
self.lightEntity.addComponent(self.lightTransform)
### sky
# self.skyMesh = Qt3DExtras.QSphereMesh(radius=5000, rings=94, slices=48)
# self.skyMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#ff0000"))
# self.skyEntity = Qt3DCore.QEntity(self.rootEntity)
# self.skyEntity.addComponent(self.skyMesh)
# self.skyEntity.addComponent(self.skyMaterial)
### hdg, x right, y up
# Cylinder cog = (0,0,0) long direction = y
self.hdgMesh = Qt3DExtras.QCylinderMesh(length=1200.0, radius=100.0, rings=100, slices=20)
rotation = QtGui.QQuaternion.fromAxisAndAngle(QtGui.QVector3D(0.0, 0.0, 1.0), 15.0)
translation = QtGui.QVector3D(0.0, 600.0, 0.0)
self.hdgTransform = Qt3DCore.QTransform(translation=translation, rotation=rotation)
self.hdgMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#ff0000"))
self.hdgEntity = Qt3DCore.QEntity(self.rootEntity)
self.hdgEntity.addComponent(self.hdgMesh)
self.hdgEntity.addComponent(self.hdgMaterial)
self.hdgEntity.addComponent(self.hdgTransform)
### lat x up, y left
self.latMesh = Qt3DExtras.QCylinderMesh(length=200.0, radius=100.0, rings=100, slices=20)
rotation = QtGui.QQuaternion.fromAxisAndAngle(QtGui.QVector3D(0.0, 0.0, 1.0), 90.0)
translation = QtGui.QVector3D(0.0, 700.0, 0.0)
self.latTransform = Qt3DCore.QTransform(rotation=rotation, translation=translation)
self.latMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#00ff00"))
self.latEntity = Qt3DCore.QEntity(self.hdgEntity)
self.latEntity.addComponent(self.latMesh)
self.latEntity.addComponent(self.latMaterial)
self.latEntity.addComponent(self.latTransform)
### ra x up, y left
self.raMesh = Qt3DExtras.QCylinderMesh(length=500.0, radius=100.0, rings=100, slices=20)
rotation1 = QtGui.QQuaternion.fromAxisAndAngle(QtGui.QVector3D(0.0, 0.0, -1.0), 90)
rotation2 = QtGui.QQuaternion.fromAxisAndAngle(QtGui.QVector3D(-1.0, 0.0, 0.0), 90)
rotation = rotation1 * rotation2
translation = QtGui.QVector3D(200.0, 0.0, 0.0)
self.raTransform = Qt3DCore.QTransform(rotation=rotation, translation=translation)
self.raMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#beb32b"))
self.raEntity = Qt3DCore.QEntity(self.latEntity)
self.raEntity.addComponent(self.raMesh)
self.raEntity.addComponent(self.raMaterial)
self.raEntity.addComponent(self.raTransform)
### dec
self.decMesh = Qt3DExtras.QCylinderMesh(length=500.0, radius=100.0, rings=100, slices=20)
rotation = QtGui.QQuaternion.fromAxisAndAngle(QtGui.QVector3D(1.0, 0.0, 0.0), 90.0)
translation = QtGui.QVector3D(0.0, 350.0, 0.0)
self.decTransform = Qt3DCore.QTransform(rotation=rotation, translation=translation)
self.decMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#0000ff"))
self.decEntity = Qt3DCore.QEntity(self.raEntity)
self.decEntity.addComponent(self.decMesh)
self.decEntity.addComponent(self.decMaterial)
self.decEntity.addComponent(self.decTransform)
### tube
self.tubeMesh = Qt3DExtras.QCylinderMesh(length=1200.0, radius=100.0, rings=100, slices=20)
rotation = QtGui.QQuaternion.fromAxisAndAngle(QtGui.QVector3D(-1.0, 0.0, 0.0), 90.0)
translation = QtGui.QVector3D(0.0, 350.0, 100.0)
self.tubeTransform = Qt3DCore.QTransform(rotation=rotation, translation=translation)
self.tubeMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#ffffff"))
self.tubeEntity = Qt3DCore.QEntity(self.decEntity)
self.tubeEntity.addComponent(self.tubeMesh)
self.tubeEntity.addComponent(self.tubeMaterial)
self.tubeEntity.addComponent(self.tubeTransform)
self.ocuMesh = Qt3DExtras.QCylinderMesh(length=100.0, radius=50.0, rings=100, slices=20)
translation = QtGui.QVector3D(0.0, -650.0, 0.0)
self.ocuTransform = Qt3DCore.QTransform(translation=translation)
self.ocuMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#ffffff"))
self.ocuEntity = Qt3DCore.QEntity(self.tubeEntity)
self.ocuEntity.addComponent(self.ocuMesh)
self.ocuEntity.addComponent(self.ocuMaterial)
self.ocuEntity.addComponent(self.ocuTransform)
self.fakeMesh = Qt3DExtras.QCuboidMesh(xExtent=500, yExtent=500, zExtent=500)
translation = QtGui.QVector3D(-1000.0, 0, 0.0)
self.fakeTransform = Qt3DCore.QTransform(translation=translation)
self.fakeMaterial = Qt3DExtras.QPhongMaterial(diffuse=QtGui.QColor("#ffffff"))
self.fakeEntity = Qt3DCore.QEntity(self.rootEntity)
self.fakeEntity.addComponent(self.fakeMesh)
self.fakeEntity.addComponent(self.fakeMaterial)
self.fakeEntity.addComponent(self.fakeTransform)
self._heading = 0
self._latitude = 45
self._ra = 0
self._dec = 90
def __init__(self, args, parent=None):
super().__init__(parent)
##############################################################################
# UI初期化処理
self.ui = MainWindowUi.loader(os.path.join(os.getcwd(), 'ui/main.ui'))
self.setWindowTitle('self.viewer test')
self.setCentralWidget(self.ui.widgets)
self.view = Qt3DExtras.Qt3DWindow()
self.view.defaultFrameGraph().setClearColor(QtGui.QColor(0, 0, 0))
self.container = QWidget.createWindowContainer(self.view)
screen_size = self.view.screen().size()
self.ui.viewer.addWidget(self.container)
self.container.setMinimumSize(QtCore.QSize(400, 600))
self.container.setMaximumSize(screen_size)
# QSize screenSize = self.view -> screen() -> size();
# container -> setMinimumSize(QSize(200, 100));
# container -> setMaximumSize(screenSize);
# vLayout -> setAlignment(Qt: : AlignTop);
# hLayout -> addWidget(container, 1);
# hLayout -> addLayout(vLayout);
# input_aspect = Qt3DInput.QInputAspect()
# self.view.registerAspect(input_aspect)
# root entity
self.root_entity: Qt3DCore.QEntity = Qt3DCore.QEntity()
# draw grid and axis
"""
self.x_axis: Qt3DRender.QGeometry = Qt3DRender.QGeometry(self.root_entity)
x_axis_pos: QtCore.QByteArray = QtCore.QByteArray()
x_axis_pos.append(0)
x_axis_pos.append(0)
x_axis_pos.append(0)
x_axis_pos.append(10)
x_axis_pos.append(0)
x_axis_pos.append(0)
x_axis_buf: Qt3DRender.QBuffer = Qt3DRender.QBuffer(self.x_axis)
x_axis_buf.setData(x_axis_pos)
x_axis_attr: Qt3DRender.QAttribute = Qt3DRender.QAttribute(self.x_axis)
x_axis_attr.setVertexBaseType(Qt3DRender.QAttribute.Float)
x_axis_attr.setVertexSize(3)
x_axis_attr.setAttributeType(Qt3DRender.QAttribute.VertexAttribute)
x_axis_attr.setBuffer(x_axis_buf)
x_axis_attr.setByteStride(3)
x_axis_attr.setCount(2)
self.x_axis.addAttribute(x_axis_attr)
"""
test_mtl = Qt3DExtras.QTextureMaterial(self.root_entity)
self.test = Qt3DCore.QEntity(self.root_entity)
self.test_mesh: Qt3DExtras.QTorusMesh = Qt3DExtras.QTorusMesh()
self.test_mesh.setRadius(5)
self.test_mesh.setMinorRadius(1)
self.test_mesh.setRings(100)
self.test_mesh.setSlices(20)
self.test_tr = Qt3DCore.QTransform()
self.test_tr.setTranslation(QtGui.QVector3D(0, 0, 0))
# test_tr.setScale3D()
self.test.addComponent(self.test_mesh)
self.test.addComponent(self.test_tr)
self.test.addComponent(self.test_mtl)
# camera entity
camera_entity: Qt3DRender.QCamera = self.view.camera()
camera_entity.lens().setPerspectiveProjection(45.0, 16.0 / 9.0, 0.1, 1000.0)
camera_entity.setPosition(QtGui.QVector3D(0, 0, 20.0))
camera_entity.setUpVector(QtGui.QVector3D(0, 1, 0))
camera_entity.setViewCenter(QtGui.QVector3D(0, 0, 0))
light_entity = Qt3DCore.QEntity(self.root_entity)
light = Qt3DRender.QPointLight(light_entity)
light.setColor("white")
light.setIntensity(1)
light_entity.addComponent(light)
light_transform = Qt3DCore.QTransform(light_entity)
light_transform.setTranslation(camera_entity.position())
light_entity.addComponent(light_transform)
# for camera controls
cam_controller = Qt3DExtras.QFirstPersonCameraController(self.root_entity)
cam_controller.setCamera(camera_entity)
# set root object of the scene
self.view.setRootEntity(self.root_entity)
def __init__(self):
super(AthenaViewer, self).__init__()
self._qtrefs = []
self.framegraph = AthenaFrameGraph(self)
self.setActiveFrameGraph(self.framegraph.root)
self.resetBackgroundColor()
self.lightOrientation = int(0) # Internal integer controlling light.position attribute
self.renderSettings().setRenderPolicy(self.renderSettings().OnDemand)
self.rootEntity = Qt3DCore.QEntity()
self.initParameters() # defined in metaclass
self.faceEnableChanged.connect( self.handleFaceRenderChange )
self.lightPositionChanged.connect( self.handleLightPositionChange )
self.wireEnableChanged.connect( self.handleWireframeRenderChange )
self.sphere_material = self._imposterMaterial('sphere')
self.cylinder_material = self._imposterMaterial('cylinder')
self.cone_material = self._imposterMaterial('cone')
self.flat_material = self._plyMeshMaterial( 'flat' )
self.flat_material.addParameter( self._flatColorParam )
self.gooch_material = self._plyMeshMaterial( 'gooch' )
self.gooch_material.addParameter( self._coolColorParam )
self.gooch_material.addParameter( self._warmColorParam )
self.gooch_material.addParameter( self._lightPositionParam )
# The vertical split line enabled for split-screen view
self.overlay_material = self._overlayMaterial()
self.splitLineEntity = decorations.LineDecoration( self.rootEntity, [0,-1,0], [0,1,0], [1,1,1,1] )
self.splitLineEntity.addComponent( self.overlay_material )
self.splitLineEntity.setEnabled(False)
# Each time a mesh is loaded, we create a new Plymesh and add a material as a component.
# Old meshes are deleteLater()-ed. A problem with this approach is that the deleted QEntities
# also delete their components (and this seems true even if we try to remove the component first).
# The workaround we use here is to also add the materials as components of the root entity,
# which keeps Qt3D from deleting them. I don't know if this is the best approach, but it works.
self.rootEntity.addComponent(self.flat_material)
self.rootEntity.addComponent(self.gooch_material)
self.rootEntity.addComponent(self.sphere_material)
self.rootEntity.addComponent(self.cylinder_material)
self.rootEntity.addComponent(self.cone_material)
self.setRootEntity(self.rootEntity)
self.meshEntityParent = Qt3DCore.QEntity( self.rootEntity )
self.meshEntity = None
class DecorationEntity(Qt3DCore.QEntity):
def __init__(self, parent):
super().__init__(parent)
self.spheres = None
self.cylinders = None
self.cones = None
self.cylModelEntity = DecorationEntity( self.rootEntity )
self.routModelEntities = [ DecorationEntity( self.rootEntity ) for x in range(2) ]
self.atomModelEntities = [ DecorationEntity( self.rootEntity ) for x in range(2) ]
self.lastpos = None
self.mouseTool = 'rotate'
self.setDpi( self.screen().physicalDotsPerInch() )
self.camControl = OrthoCamController(self,self.camera(),None,False)