def onPartView(self):
self.focus()
device = self.device
numPorts = device['ports'].GetValue()
referenceDesignator = device['ref'].GetValue()
portLine = 'port'
for port in range(numPorts):
portLine = portLine + ' ' + str(
port + 1) + ' ' + referenceDesignator + ' ' + str(port + 1)
deviceLine = device.NetListLine()
netList = [deviceLine, portLine]
import SignalIntegrity.Lib as si
spnp = si.p.SystemSParametersNumericParser(
si.fd.EvenlySpacedFrequencyList(
SignalIntegrity.App.
Project['CalculationProperties.EndFrequency'], SignalIntegrity.
App.Project['CalculationProperties.FrequencyPoints']))
spnp.AddLines(netList)
try:
sp = spnp.SParameters()
except si.SignalIntegrityException as e:
messagebox.showerror('S-parameter Calculator',
e.parameter + ': ' + e.message)
return
fileParts = copy.copy(self.parent.parent.fileparts)
fileParts.filename = fileParts.filename + '_' + referenceDesignator
spd = SParametersDialog(
self.parent.parent,
sp,
filename=fileParts.FullFilePathExtension('s' + str(sp.m_P) + 'p'))
spd.grab_set()
def onFileView(self):
self.parentFrame.focus()
filename = self.partProperty.GetValue()
if filename != '':
import SignalIntegrity.Lib as si
if self.partProperty['PropertyName'] == 'filename':
fp = FileParts(filename)
if fp.fileext == '.si':
result = os.system('SignalIntegrity ' +
os.path.abspath(filename) +
' --external')
if result != 0:
messagebox.showerror('ProjectFile',
'could not be opened')
return
else:
try:
sp = si.sp.SParameterFile(filename)
except si.SignalIntegrityException as e:
messagebox.showerror('S-parameter Viewer',
e.parameter + ': ' + e.message)
return
spd = SParametersDialog(self.parent.parent.parent, sp,
filename)
spd.grab_set()
elif self.partProperty['PropertyName'] == 'waveformfilename':
if FileParts(filename).fileext == '.si':
result = os.system('SignalIntegrity ' +
os.path.abspath(filename) +
' --external')
if result != 0:
messagebox.showerror('ProjectFile',
'could not be opened')
return
else:
filenametoshow = ('/'.join(
filename.split('\\'))).split('/')[-1]
if filenametoshow is None:
filenametoshow = ''
try:
wf = self.parent.device.Waveform()
except si.SignalIntegrityException as e:
messagebox.showerror('Waveform Viewer',
e.parameter + ': ' + e.message)
return
sd = SimulatorDialog(self.parent.parent)
sd.title(filenametoshow)
sd.UpdateWaveforms([wf], [filenametoshow])
sd.state('normal')
sd.grab_set()
def onExamineTransferMatrices(self):
buttonLabelList=[[out+' due to '+inp for inp in self.parent.sourceNames] for out in self.parent.outputWaveformLabels]
maxLength=len(max([item for sublist in buttonLabelList for item in sublist],key=len))
buttonLabelList=[[item.ljust(maxLength) for item in sublist] for sublist in buttonLabelList]
sp=self.parent.transferMatrices.SParameters()
SParametersDialog(self.parent.parent,sp,
self.parent.parent.fileparts.FullFilePathExtension('s'+str(sp.m_P)+'p'),
'Transfer Parameters',buttonLabelList)
def VirtualProbe(self,TransferMatricesOnly=False):
netList=self.parent.Drawing.schematic.NetList()
netListText=netList.Text()
import SignalIntegrity.Lib as si
cacheFileName=None
if SignalIntegrity.App.Preferences['Cache.CacheResults']:
cacheFileName=self.parent.fileparts.FileNameTitle()
si.sd.Numeric.trySVD=SignalIntegrity.App.Preferences['Calculation.TrySVD']
snp=si.p.VirtualProbeNumericParser(
si.fd.EvenlySpacedFrequencyList(
SignalIntegrity.App.Project['CalculationProperties.EndFrequency'],
SignalIntegrity.App.Project['CalculationProperties.FrequencyPoints']),
cacheFileName=cacheFileName)
snp.AddLines(netListText)
progressDialog=ProgressDialog(self.parent,"Transfer Parameters",snp,snp.TransferMatrices, granularity=1.0)
try:
self.transferMatrices=progressDialog.GetResult()
except si.SignalIntegrityException as e:
messagebox.showerror('Virtual Probe',e.parameter+': '+e.message)
return
self.transferMatriceProcessor=si.td.f.TransferMatricesProcessor(self.transferMatrices)
si.td.wf.Waveform.adaptionStrategy='SinX' if SignalIntegrity.App.Preferences['Calculation.UseSinX'] else 'Linear'
si.td.wf.Waveform.maximumWaveformSize = SignalIntegrity.App.Preferences['Calculation.MaximumWaveformSize']
try:
self.inputWaveformList=self.parent.Drawing.schematic.InputWaveforms()
self.sourceNames=netList.MeasureNames()
except si.SignalIntegrityException as e:
messagebox.showerror('Virtual Probe',e.parameter+': '+e.message)
return
if TransferMatricesOnly:
buttonLabelList=[[out+' due to '+inp for inp in self.sourceNames] for out in self.outputWaveformLabels]
maxLength=len(max([item for sublist in buttonLabelList for item in sublist],key=len))
buttonLabelList=[[item.ljust(maxLength) for item in sublist] for sublist in buttonLabelList]
sp=self.transferMatrices.SParameters()
SParametersDialog(self.parent,sp,
self.parent.fileparts.FullFilePathExtension('s'+str(sp.m_P)+'p'),
'Transfer Parameters',buttonLabelList)
progressDialog=ProgressDialog(self.parent,"Waveform Processing",self.transferMatriceProcessor,self._ProcessWaveforms)
try:
outputWaveformList = progressDialog.GetResult()
except si.SignalIntegrityException as e:
messagebox.showerror('Virtual Probe',e.parameter+': '+e.message)
return
self.outputWaveformLabels=netList.OutputNames()
for outputWaveformIndex in range(len(outputWaveformList)):
outputWaveform=outputWaveformList[outputWaveformIndex]
outputWaveformLabel = self.outputWaveformLabels[outputWaveformIndex]
for device in self.parent.Drawing.schematic.deviceList:
if device['partname'].GetValue() in ['Output','DifferentialVoltageOutput','CurrentOutput','EyeProbe','DifferentialEyeProbe']:
if device['ref'].GetValue() == outputWaveformLabel:
# probes may have different kinds of gain specified
gainProperty = device['gain']
gain=gainProperty.GetValue()
offset=device['offset'].GetValue()
delay=device['td'].GetValue()
if gain != 1.0 or offset != 0.0 or delay != 0.0:
outputWaveform = outputWaveform.DelayBy(delay)*gain+offset
outputWaveformList[outputWaveformIndex]=outputWaveform
break
userSampleRate=SignalIntegrity.App.Project['CalculationProperties.UserSampleRate']
outputWaveformList = [wf.Adapt(
si.td.wf.TimeDescriptor(wf.td.H,int(wf.td.K*userSampleRate/wf.td.Fs),userSampleRate))
for wf in outputWaveformList]
self.SimulatorDialog().title('Virtual Probe: '+self.parent.fileparts.FileNameTitle())
self.SimulatorDialog().ExamineTransferMatricesDoer.Activate(True)
self.SimulatorDialog().SimulateDoer.Activate(True)
self.UpdateWaveforms(outputWaveformList, self.outputWaveformLabels)
self.SimulatorDialog().update_idletasks()
# gather up the eye probes and create a dialog for each one
eyeDiagramDict=[]
for outputWaveformIndex in range(len(outputWaveformList)):
outputWaveform=outputWaveformList[outputWaveformIndex]
outputWaveformLabel = self.outputWaveformLabels[outputWaveformIndex]
for device in self.parent.Drawing.schematic.deviceList:
if device['partname'].GetValue() in ['EyeProbe','DifferentialEyeProbe']:
if device['ref'].GetValue() == outputWaveformLabel:
eyeDict={'Name':outputWaveformLabel,
'BaudRate':device['br'].GetValue(),
'Waveform':outputWaveformList[self.outputWaveformLabels.index(outputWaveformLabel)],
'Config':device.configuration}
eyeDiagramDict.append(eyeDict)
break
self.UpdateEyeDiagrams(eyeDiagramDict)
def Simulate(self, SParameters=False):
"""
simulates with a network analyzer model
"""
#
# the first step is to calculate the s-parameters of a DUT connected to the ports
# of the network analyzer.
#
self.parent.Drawing.stateMachine.Nothing()
netList = self.parent.Drawing.schematic.NetList().Text()
import SignalIntegrity.Lib as si
fd = si.fd.EvenlySpacedFrequencyList(
SignalIntegrity.App.Project['CalculationProperties.EndFrequency'],
SignalIntegrity.App.
Project['CalculationProperties.FrequencyPoints'])
cacheFileName = None
if SignalIntegrity.App.Preferences['Cache.CacheResults']:
cacheFileName = self.parent.fileparts.FileNameTitle(
) + '_DUTSParameters'
si.sd.Numeric.trySVD = SignalIntegrity.App.Preferences[
'Calculation.TrySVD']
spnp = si.p.DUTSParametersNumericParser(fd,
cacheFileName=cacheFileName)
spnp.AddLines(netList)
progressDialog = ProgressDialog(self.parent,
"Calculating DUT S-parameters",
spnp,
spnp.SParameters,
granularity=1.0)
try:
(DUTSp, NetworkAnalyzerProjectFile) = progressDialog.GetResult()
showDutsp = False
if showDutsp:
from SignalIntegrity.App.SParameterViewerWindow import SParametersDialog
self.spd = self.spd = SParametersDialog(
self.parent,
DUTSp,
filename=self.parent.fileparts.FullFilePathExtension(
's' + str(DUTSp.m_P) + 'p'))
except si.SignalIntegrityException as e:
messagebox.showerror('DUT S-parameter Calculator',
e.parameter + ': ' + e.message)
return None
#
# DUTSp now contains the s-parameters of the DUT. The DUT has a number of ports dictated by how many ports were actually connected
# to the network analzyer, and the port connections are in spnp.NetworkAnalyzerPortConnectionList
#
# The next step is to get the netlist from the network analyzer model's project
#
netListText = None
if NetworkAnalyzerProjectFile != None:
level = SignalIntegrityAppHeadless.projectStack.Push()
try:
app = SignalIntegrityAppHeadless()
if app.OpenProjectFile(
os.path.realpath(NetworkAnalyzerProjectFile)):
app.Drawing.DrawSchematic()
netList = app.Drawing.schematic.NetList()
netListText = netList.Text()
else:
raise SignalIntegrityExceptionNetworkAnalyzer(
'file could not be opened: ' +
NetworkAnalyzerProjectFile)
except SignalIntegrityException as e:
messagebox.showerror('Network Analyzer Model: ',
e.parameter + ': ' + e.message)
finally:
SignalIntegrityAppHeadless.projectStack.Pull(level)
else:
netList = self.parent.Drawing.schematic.NetList()
netListText = self.parent.NetListText()
if netListText == None:
return
#
# Now, with the dut s-parameters and the netlist of the network analyzer model, get the transfer matrices for a simulation with the DUT
# using the network analyzer model.
#
cacheFileName = self.parent.fileparts.FileNameTitle(
) + '_TransferMatrices' if SignalIntegrity.App.Preferences[
'Cache.CacheResults'] else None
si.sd.Numeric.trySVD = SignalIntegrity.App.Preferences[
'Calculation.TrySVD']
snp = si.p.NetworkAnalyzerSimulationNumericParser(
fd,
DUTSp,
spnp.NetworkAnalyzerPortConnectionList,
cacheFileName=cacheFileName)
snp.AddLines(netListText)
progressDialog = ProgressDialog(self.parent,
"Calculating Transfer Matrices",
snp,
snp.TransferMatrices,
granularity=1.0)
level = SignalIntegrityAppHeadless.projectStack.Push()
try:
os.chdir(
FileParts(os.path.abspath(
NetworkAnalyzerProjectFile)).AbsoluteFilePath())
self.transferMatrices = progressDialog.GetResult()
except si.SignalIntegrityException as e:
messagebox.showerror('Transfer Matrices Calculation: ',
e.parameter + ': ' + e.message)
return None
finally:
SignalIntegrityAppHeadless.projectStack.Pull(level)
self.sourceNames = snp.m_sd.SourceVector()
#
# to clear up any confusion, if the DUT was not connected to all of the network analyzer ports, a multi-port DUT with
# opens on the unconnected ports was constructed and connected as the DUT, but it was remembered which network
# analyzer ports are actually driven. The driven ports, in order, are the first names in self.sourceNames with
# snp.simulationNumPorts containing the number of them.
#
# In other words, if a single-port reflect calibration is performed on port 2 of the network analyzer, a two-port
# DUT was installed, with an open on port 1, and the transfer parameters were computed for only the outputs needed
# (the superfluous probe outputs were removed). self.sourceNames would contain only the reference designator for
# the transmitter that is on port 2, followed by any other waveforms supplied to the system (usuaully noise).
#
# Now, we loop over all of the transmitters that are driven and create a list of lists, where each element in the list
# is a list of input waveforms to be used in the simulation under that driven condition. We do this by first, setting
# all of the transmitters in the appropriate on/off state, and then gathering all of the waveforms.
#
gdoDict = {}
self.wflist = []
if NetworkAnalyzerProjectFile != None:
level = SignalIntegrityAppHeadless.projectStack.Push()
try:
app = SignalIntegrityAppHeadless()
if app.OpenProjectFile(
os.path.realpath(NetworkAnalyzerProjectFile)):
app.Drawing.DrawSchematic()
# get output gain, offset, delay
for name in [rdn[2] for rdn in snp.m_sd.pOutputList]:
gdoDict[name] = {
'gain': float(app.Device(name)['gain']['Value']),
'offset':
float(app.Device(name)['offset']['Value']),
'delay': float(app.Device(name)['td']['Value'])
}
for driven in range(snp.simulationNumPorts):
for port in range(snp.simulationNumPorts):
app.Device(self.sourceNames[port])['state'][
'Value'] = 'on' if port == driven else 'off'
self.wflist.append([
app.Device(self.sourceNames[wfIndex]).Waveform()
for wfIndex in range(len(self.sourceNames))
])
else:
raise SignalIntegrityExceptionNetworkAnalyzer(
'file could not be opened: ' +
NetworkAnalyzerProjectFile)
except SignalIntegrityException as e:
messagebox.showerror('Network Analyzer Model: ',
e.parameter + ': ' + e.message)
finally:
SignalIntegrityAppHeadless.projectStack.Pull(level)
else:
# since we're modifying the current schematic, keep the state for restoring
stateList = [
app.Device(self.sourceNames[port])['state']['Value']
for port in range(snp.simulationNumPorts)
]
for name in [rdn[2] for rdn in snp.m_sd.pOutputList]:
gdoDict[name] = {
'gain': float(app.Device()[name]['gain']['Value']),
'offset': float(app.Device()[name]['offset']['Value']),
'delay': float(app.Device()[name]['td']['Value'])
}
for driven in range(snp.simulationNumPorts):
for port in range(snp.simulationNumPorts):
app.Device(
self.sourceNames[port]
)['state']['Value'] = 'on' if port == driven else 'off'
self.wflist.append([
app.Device(self.sourceNames[wfIndex]).Waveform()
for wfIndex in range(len(self.sourceNames))
])
# restore the states
for port in range(snp.simulationNumPorts):
app.Device(
self.sourceNames[port])['state']['Value'] = stateList[port]
#
# Now, the list of list of input waveforms are processed, generating a list of list of output waveforms in
# self.outputwflist.
#
self.transferMatriceProcessor = si.td.f.TransferMatricesProcessor(
self.transferMatrices)
si.td.wf.Waveform.adaptionStrategy = 'SinX' if SignalIntegrity.App.Preferences[
'Calculation.UseSinX'] else 'Linear'
progressDialog = ProgressDialog(self.parent, "Waveform Processing",
self.transferMatriceProcessor,
self._ProcessWaveforms)
try:
outputWaveformList = progressDialog.GetResult()
except si.SignalIntegrityException as e:
messagebox.showerror('Simulator', e.parameter + ': ' + e.message)
return
#
# The list of list of input waveforms have been processed processed, generating a list of list of output waveforms in
# self.outputwflist. The names of the output waveforms are in snp.m_sd.pOutputList.
#
self.outputwflist = [[
wf.Adapt(
si.td.wf.TimeDescriptor(wf.td[wf.td.IndexOfTime(-5e-9)],
fd.TimeDescriptor().K, wf.td.Fs))
for wf in driven
] for driven in self.outputwflist]
# The port connection list, which is a list of True or False for each port on the network analyzer, is
# converted to a list of network port indices corresponding to the driven ports.
#
portConnections = []
for pci in range(len(snp.PortConnectionList)):
if snp.PortConnectionList[pci]: portConnections.append(pci)
# Here, the output waveforms are refined by applying any probe gain, offset, and delay, and the
# waveform labels are converted to a list of list of waveform labels, with the driven port appended.
outputWaveformList = []
self.outputWaveformLabels = []
for r in range(len(self.outputwflist)):
wflist = self.outputwflist[r]
for c in range(len(wflist)):
wf = wflist[c]
wfName = snp.m_sd.pOutputList[c][2]
gain = gdoDict[wfName]['gain']
offset = gdoDict[wfName]['offset']
delay = gdoDict[wfName]['delay']
if gain != 1.0 or offset != 0.0 or delay != 0.0:
wf = wf.DelayBy(delay) * gain + offset
outputWaveformList.append(wf)
self.outputWaveformLabels.append(wfName +
str(portConnections[r] + 1))
userSampleRate = SignalIntegrity.App.Project[
'CalculationProperties.UserSampleRate']
outputWaveformList = [
wf.Adapt(
si.td.wf.TimeDescriptor(
wf.td.H, int(wf.td.K * userSampleRate / wf.td.Fs),
userSampleRate)) for wf in outputWaveformList
]
td = si.td.wf.TimeDescriptor(
-5e-9,
SignalIntegrity.App.Project['CalculationProperties.TimePoints'],
SignalIntegrity.App.Project['CalculationProperties.BaseSampleRate']
)
frequencyList = td.FrequencyList()
if snp.simulationType != 'CW':
# note this matrix is transposed from what is normally expected
Vmat = [[
outputWaveformList[self.outputWaveformLabels.index(
'V' + str(portConnections[r] + 1) +
str(portConnections[c] + 1))]
for r in range(len(portConnections))
] for c in range(len(portConnections))]
for vli in range(len(Vmat)):
tdr = si.m.tdr.TDRWaveformToSParameterConverter(
WindowForwardHalfWidthTime=500e-12,
WindowReverseHalfWidthTime=500e-12,
WindowRaisedCosineDuration=250e-12,
Step=(snp.simulationType == 'TDRStep'),
Length=0,
Denoise=(snp.simulationType != 'TDRStep'),
DenoisePercent=20.,
Inverted=False,
fd=frequencyList)
tdr.Convert(Vmat[vli], vli)
for r in range(len(portConnections)):
outputWaveformList.append(tdr.IncidentWaveform if r ==
vli else si.td.wf.Waveform(td))
self.outputWaveformLabels.append(
'A' + str(portConnections[r] + 1) +
str(portConnections[vli] + 1))
for r in range(len(portConnections)):
outputWaveformList.append(tdr.ReflectWaveforms[r])
self.outputWaveformLabels.append(
'B' + str(portConnections[r] + 1) +
str(portConnections[vli] + 1))
if not SParameters:
self.SimulatorDialog().title('Sim: ' +
self.parent.fileparts.FileNameTitle())
self.SimulatorDialog().ExamineTransferMatricesDoer.Activate(True)
self.SimulatorDialog().SimulateDoer.Activate(True)
self.SimulatorDialog().ViewTimeDomainDoer.Set(
snp.simulationType != 'CW')
self.SimulatorDialog().ViewTimeDomainDoer.Activate(
snp.simulationType != 'CW')
self.SimulatorDialog().ViewSpectralContentDoer.Set(
snp.simulationType == 'CW')
self.SimulatorDialog().ViewSpectralDensityDoer.Set(False)
self.UpdateWaveforms(outputWaveformList, self.outputWaveformLabels)
else:
frequencyContentList = [
wf.FrequencyContent(fd) for wf in outputWaveformList
]
Afc = [[
frequencyContentList[self.outputWaveformLabels.index(
'A' + str(portConnections[r] + 1) +
str(portConnections[c] + 1))]
for c in range(len(portConnections))
] for r in range(len(portConnections))]
Bfc = [[
frequencyContentList[self.outputWaveformLabels.index(
'B' + str(portConnections[r] + 1) +
str(portConnections[c] + 1))]
for c in range(len(portConnections))
] for r in range(len(portConnections))]
from numpy import matrix
data = [None for _ in range(len(frequencyList))]
for n in range(len(frequencyList)):
B = [[Bfc[r][c][n] for c in range(snp.simulationNumPorts)]
for r in range(snp.simulationNumPorts)]
A = [[Afc[r][c][n] for c in range(snp.simulationNumPorts)]
for r in range(snp.simulationNumPorts)]
data[n] = (matrix(B) * matrix(A).getI()).tolist()
sp = si.sp.SParameters(frequencyList, data)
return sp
def onPartView(self):
self.focus()
device = self.device
numPorts = device['ports'].GetValue()
referenceDesignator = device['ref'].GetValue()
portLine = 'port'
for port in range(numPorts):
portLine = portLine + ' ' + str(
port + 1) + ' ' + referenceDesignator + ' ' + str(port + 1)
deviceLine = device.NetListLine()
netList = [deviceLine, portLine]
import SignalIntegrity.Lib as si
spnp = si.p.SystemSParametersNumericParser(
si.fd.EvenlySpacedFrequencyList(
SignalIntegrity.App.
Project['CalculationProperties.EndFrequency'], SignalIntegrity.
App.Project['CalculationProperties.FrequencyPoints']))
spnp.AddLines(netList)
try:
sp = spnp.SParameters()
except si.SignalIntegrityException as e:
messagebox.showerror('S-parameter Calculator',
e.parameter + ': ' + e.message)
return
fileParts = copy.copy(self.parent.parent.fileparts)
fileParts.filename = fileParts.filename + '_' + referenceDesignator
spd = SParametersDialog(
self.parent.parent,
sp,
filename=fileParts.FullFilePathExtension('s' + str(sp.m_P) + 'p'))
try:
import platform
thisOS = platform.system()
if thisOS == 'Linux':
spd.attributes('-type', 'dialog')
elif thisOS == 'Windows':
spd.attributes('-toolwindow', True)
def disable_event():
pass
self.parent.protocol("WM_DELETE_WINDOW", disable_event)
spd.attributes('-topmost', 1)
spd.focus_set()
spd.grab_set()
# spd.transient(self.parent)
self.wait_window(spd)
finally:
self.parent.protocol("WM_DELETE_WINDOW", self.parent.cancel)
def onFileView(self):
self.parentFrame.focus()
filename = self.partProperty.GetValue()
if filename != '':
import SignalIntegrity.Lib as si
if FileParts(filename).fileext == '.si':
result = os.system('SignalIntegrity "' +
os.path.abspath(filename) + '" --external')
if result != 0:
messagebox.showerror('ProjectFile', 'could not be opened')
return
elif self.partProperty['PropertyName'] == 'filename':
try:
sp = si.sp.SParameterFile(filename)
except si.SignalIntegrityException as e:
messagebox.showerror('S-parameter Viewer',
e.parameter + ': ' + e.message)
return
spd = SParametersDialog(self.parent.parent.parent, sp,
filename)
try:
spd.grab_set()
spd.focus_set()
import platform
thisOS = platform.system()
if thisOS == 'Linux':
spd.attributes('-type', 'dialog')
elif thisOS == 'Windows':
spd.attributes('-toolwindow', True)
def disable_event():
pass
self.parent.parent.protocol("WM_DELETE_WINDOW",
disable_event)
spd.attributes('-topmost', 1)
# spd.transient(self.parent.parent)
self.wait_window(spd)
finally:
self.parent.parent.protocol("WM_DELETE_WINDOW",
self.parent.parent.cancel)
elif self.partProperty['PropertyName'] == 'waveformfilename':
filenametoshow = ('/'.join(
filename.split('\\'))).split('/')[-1]
if filenametoshow is None:
filenametoshow = ''
try:
wf = self.parent.device.Waveform()
except si.SignalIntegrityException as e:
messagebox.showerror('Waveform Viewer',
e.parameter + ': ' + e.message)
return
sd = SimulatorDialog(self.parent.parent)
sd.title(filenametoshow)
sd.UpdateWaveforms([wf], [filenametoshow])
sd.state('normal')
try:
import platform
thisOS = platform.system()
if thisOS == 'Linux':
sd.attributes('-type', 'dialog')
elif thisOS == 'Windows':
sd.attributes('-toolwindow', True)
def disable_event():
pass
self.parent.parent.protocol("WM_DELETE_WINDOW",
disable_event)
sd.attributes('-topmost', 1)
sd.focus_set()
sd.grab_set()
# sd.transient(self.parent.parent)
self.wait_window(sd)
finally:
self.parent.parent.protocol("WM_DELETE_WINDOW",
self.parent.parent.cancel)
elif self.partProperty['PropertyName'] == 'errorterms':
calibration = self.parent.parent.parent.OpenCalibrationFile(
os.path.abspath(filename))
if calibration is None:
messagebox.showerror('Calibration File',
'could not be opened')
return
else:
self.parent.parent.parent.ViewCalibration(calibration)