def profiledata(Binc, Bdec, Bigrf, depth, susc, comp, irt, Q, rinc, rdec,
update):
# Get the line extent from the 2D survey for now
sim = Mag.Simulation()
sim.prism = prism.result
xyzLoc = survey.receiver_locations.copy()
xyzLoc[:, 2] += depth
rxLoc = mag.receivers.Point(xyzLoc)
srcField = mag.sources.SourceField(receiver_list=[rxLoc],
parameters=(Bigrf, -Binc, Bdec))
survey2D = mag.Survey(srcField)
sim.survey = survey2D
sim.Q, sim.rinc, sim.rdec = Q, -rinc, rdec
sim.uType, sim.mType = comp, irt
sim.susc = susc
# Compute fields from prism
fields = sim.fields()
dpred = np.zeros_like(fields[0])
for b in fields:
dpred += b
dpred += +Bigrf
a = np.r_[xyzLoc[:, 0].min(), 0]
b = np.r_[xyzLoc[:, 0].max(), 0]
return plotProfile(xyzLoc, dobj, a, b, 10, pred=dpred, dType="2D")
def MagSurvey2D(East, North, Width, Height, Azimuth, Length, Npts,
Profile):
# Get the line extent from the 2D survey for now
Azimuth /= 180.0 / np.pi
Length /= 2.0 * 0.98
a = [
East - np.cos(-Azimuth) * Length, North - np.sin(-Azimuth) * Length
]
b = [
East + np.cos(-Azimuth) * Length, North + np.sin(-Azimuth) * Length
]
xlim = East + np.asarray([-Width / 2.0, Width / 2.0])
ylim = North + np.asarray([-Height / 2.0, Height / 2.0])
# Re-sample the survey within the region
rxLoc = survey.receiver_locations
ind = np.all(
[
rxLoc[:, 0] > xlim[0],
rxLoc[:, 0] < xlim[1],
rxLoc[:, 1] > ylim[0],
rxLoc[:, 1] < ylim[1],
],
axis=0,
)
rxLoc = mag.receivers.Point(rxLoc[ind, :])
srcField = mag.sources.SourceField(
receiver_list=[rxLoc], parameters=survey.source_field.parameters)
surveySim = mag.Survey(srcField)
fig = plt.figure(figsize=(6, 9))
ax1 = plt.subplot(2, 1, 1)
plotMagSurvey2D(surveySim, dobj.dobs[ind], a, b, Npts, fig=fig, ax=ax1)
if Profile:
ax2 = plt.subplot(2, 1, 2)
xyz = surveySim.receiver_locations
plotProfile(xyz,
dobj.dobs[ind],
a,
b,
Npts,
pred=None,
fig=fig,
ax=ax2)
return surveySim
def setUp(self):
# Define inducing field and sphere parameters
H0 = (50000.0, 60.0, 250.0)
# H0 = (50000., 90., 0.)
self.b0 = mag.analytics.IDTtoxyz(-H0[1], H0[2], H0[0])
self.rad = 2.0
self.chi = 0.01
# Define a mesh
cs = 0.2
hxind = [(cs, 21)]
hyind = [(cs, 21)]
hzind = [(cs, 21)]
mesh = discretize.TensorMesh([hxind, hyind, hzind], "CCC")
# Get cells inside the sphere
sph_ind = getIndicesSphere([0.0, 0.0, 0.0], self.rad, mesh.gridCC)
# Adjust susceptibility for volume difference
Vratio = (4.0 / 3.0 * np.pi * self.rad**3.0) / (np.sum(sph_ind) *
cs**3.0)
model = np.ones(mesh.nC) * self.chi * Vratio
self.model = model[sph_ind]
# Creat reduced identity map for Linear Pproblem
idenMap = maps.IdentityMap(nP=int(sum(sph_ind)))
# Create plane of observations
xr = np.linspace(-20, 20, nx)
yr = np.linspace(-20, 20, ny)
self.xr = xr
self.yr = yr
X, Y = np.meshgrid(xr, yr)
components = ["bx", "by", "bz", "tmi"]
# Move obs plane 2 radius away from sphere
Z = np.ones((xr.size, yr.size)) * 2.0 * self.rad
self.locXyz = np.c_[utils.mkvc(X), utils.mkvc(Y), utils.mkvc(Z)]
rxLoc = mag.Point(self.locXyz, components=components)
srcField = mag.SourceField([rxLoc], parameters=H0)
self.survey = mag.Survey(srcField)
self.sim = mag.Simulation3DIntegral(
mesh,
survey=self.survey,
chiMap=idenMap,
actInd=sph_ind,
store_sensitivities="forward_only",
)
def createMagSurvey(xyzd, B):
"""
Create SimPEG magnetic survey pbject
INPUT
:param array: xyzd, n-by-4 array of observation points and data
:param array: B, 1-by-3 array of inducing field param [|B|, Inc, Dec]
"""
rxLoc = mag.receivers.Point(xyzd[:, :3])
source_field = mag.sources.SourceField(receiver_list=[rxLoc], parameters=B)
survey = mag.Survey(source_field)
dobj = data.Data(survey, xyzd[:, 3])
return survey, dobj
def setUp(self):
Inc = 45.0
Dec = 45.0
Btot = 51000
H0 = (Btot, Inc, Dec)
self.b0 = mag.analytics.IDTtoxyz(-Inc, Dec, Btot)
cs = 25.0
hxind = [(cs, 5, -1.3), (cs / 2.0, 41), (cs, 5, 1.3)]
hyind = [(cs, 5, -1.3), (cs / 2.0, 41), (cs, 5, 1.3)]
hzind = [(cs, 5, -1.3), (cs / 2.0, 40), (cs, 5, 1.3)]
M = discretize.TensorMesh([hxind, hyind, hzind], "CCC")
chibkg = 0.0
self.chiblk = 0.01
chi = np.ones(M.nC) * chibkg
self.rad = 100
self.sphere_center = [0.0, 0.0, 0.0]
sph_ind = getIndicesSphere(self.sphere_center, self.rad, M.gridCC)
chi[sph_ind] = self.chiblk
xr = np.linspace(-300, 300, 41)
yr = np.linspace(-300, 300, 41)
X, Y = np.meshgrid(xr, yr)
Z = np.ones((xr.size, yr.size)) * 150
components = ["bx", "by", "bz"]
self.xr = xr
self.yr = yr
self.rxLoc = np.c_[utils.mkvc(X), utils.mkvc(Y), utils.mkvc(Z)]
receivers = mag.Point(self.rxLoc, components=components)
srcField = mag.SourceField([receivers], parameters=H0)
self.survey = mag.Survey(srcField)
self.sim = mag.simulation.Simulation3DDifferential(
M,
survey=self.survey,
muMap=maps.ChiMap(M),
solver=Pardiso,
)
self.M = M
self.chi = chi
def setUp(self):
mesh = discretize.TensorMesh([4, 4, 4])
# Magnetic inducing field parameter (A,I,D)
B = [50000, 90, 0]
# Create a MAGsurvey
rx = mag.Point(np.vstack([[0.25, 0.25, 0.25], [-0.25, -0.25, 0.25]]))
srcField = mag.SourceField([rx], parameters=(B[0], B[1], B[2]))
survey = mag.Survey(srcField)
# Create the forward model operator
sim = mag.Simulation3DIntegral(mesh,
survey=survey,
chiMap=maps.IdentityMap(mesh))
# Compute forward model some data
m = np.random.rand(mesh.nC)
data = sim.make_synthetic_data(m, add_noise=True)
reg = regularization.Sparse(mesh)
reg.mref = np.zeros(mesh.nC)
reg.norms = np.c_[0, 1, 1, 1]
reg.eps_p, reg.eps_q = 1e-3, 1e-3
# Data misfit function
dmis = data_misfit.L2DataMisfit(data)
dmis.W = 1.0 / data.relative_error
# Add directives to the inversion
opt = optimization.ProjectedGNCG(maxIter=2,
lower=-10.0,
upper=10.0,
maxIterCG=2)
invProb = inverse_problem.BaseInvProblem(dmis, reg, opt)
self.mesh = mesh
self.invProb = invProb
self.sim = sim
def setUp(self):
np.random.seed(0)
# First we need to define the direction of the inducing field
# As a simple case, we pick a vertical inducing field of magnitude
# 50,000nT.
# From old convention, field orientation is given as an
# azimuth from North (positive clockwise)
# and dip from the horizontal (positive downward).
H0 = (50000.0, 90.0, 0.0)
# Create a mesh
h = [5, 5, 5]
padDist = np.ones((3, 2)) * 100
nCpad = [2, 4, 2]
# Create grid of points for topography
# Lets create a simple Gaussian topo and set the active cells
[xx, yy] = np.meshgrid(np.linspace(-200.0, 200.0, 50),
np.linspace(-200.0, 200.0, 50))
b = 100
A = 50
zz = A * np.exp(-0.5 * ((xx / b)**2.0 + (yy / b)**2.0))
# We would usually load a topofile
topo = np.c_[utils.mkvc(xx), utils.mkvc(yy), utils.mkvc(zz)]
# Create and array of observation points
xr = np.linspace(-100.0, 100.0, 20)
yr = np.linspace(-100.0, 100.0, 20)
X, Y = np.meshgrid(xr, yr)
Z = A * np.exp(-0.5 * ((X / b)**2.0 + (Y / b)**2.0)) + 5
# Create a MAGsurvey
xyzLoc = np.c_[utils.mkvc(X.T), utils.mkvc(Y.T), utils.mkvc(Z.T)]
rxLoc = mag.Point(xyzLoc)
srcField = mag.SourceField([rxLoc], parameters=H0)
survey = mag.Survey(srcField)
# self.mesh.finalize()
self.mesh = meshutils.mesh_builder_xyz(
xyzLoc,
h,
padding_distance=padDist,
mesh_type="TREE",
)
self.mesh = meshutils.refine_tree_xyz(
self.mesh,
topo,
method="surface",
octree_levels=nCpad,
octree_levels_padding=nCpad,
finalize=True,
)
# Define an active cells from topo
actv = utils.surface2ind_topo(self.mesh, topo)
nC = int(actv.sum())
# We can now create a susceptibility model and generate data
# Lets start with a simple block in half-space
self.model = utils.model_builder.addBlock(
self.mesh.gridCC,
np.zeros(self.mesh.nC),
np.r_[-20, -20, -15],
np.r_[20, 20, 20],
0.05,
)[actv]
# Create active map to go from reduce set to full
self.actvMap = maps.InjectActiveCells(self.mesh, actv, np.nan)
# Creat reduced identity map
idenMap = maps.IdentityMap(nP=nC)
# Create the forward model operator
sim = mag.Simulation3DIntegral(
self.mesh,
survey=survey,
chiMap=idenMap,
actInd=actv,
store_sensitivities="ram",
)
self.sim = sim
data = sim.make_synthetic_data(self.model,
relative_error=0.0,
noise_floor=1.0,
add_noise=True)
# Create a regularization
reg = regularization.Sparse(self.mesh, indActive=actv, mapping=idenMap)
reg.norms = np.c_[0, 0, 0, 0]
reg.mref = np.zeros(nC)
# Data misfit function
dmis = data_misfit.L2DataMisfit(simulation=sim, data=data)
# Add directives to the inversion
opt = optimization.ProjectedGNCG(
maxIter=10,
lower=0.0,
upper=10.0,
maxIterLS=5,
maxIterCG=5,
tolCG=1e-4,
stepOffBoundsFact=1e-4,
)
invProb = inverse_problem.BaseInvProblem(dmis, reg, opt, beta=1e6)
# Here is where the norms are applied
# Use pick a treshold parameter empirically based on the distribution of
# model parameters
IRLS = directives.Update_IRLS(f_min_change=1e-3,
max_irls_iterations=20,
beta_tol=1e-1,
beta_search=False)
update_Jacobi = directives.UpdatePreconditioner()
sensitivity_weights = directives.UpdateSensitivityWeights()
self.inv = inversion.BaseInversion(
invProb, directiveList=[IRLS, sensitivity_weights, update_Jacobi])
def setUp(self):
np.random.seed(0)
H0 = (50000.0, 90.0, 0.0)
# The magnetization is set along a different
# direction (induced + remanence)
M = np.array([45.0, 90.0])
# Create grid of points for topography
# Lets create a simple Gaussian topo
# and set the active cells
[xx, yy] = np.meshgrid(np.linspace(-200, 200, 50),
np.linspace(-200, 200, 50))
b = 100
A = 50
zz = A * np.exp(-0.5 * ((xx / b)**2.0 + (yy / b)**2.0))
# We would usually load a topofile
topo = np.c_[utils.mkvc(xx), utils.mkvc(yy), utils.mkvc(zz)]
# Create and array of observation points
xr = np.linspace(-100.0, 100.0, 20)
yr = np.linspace(-100.0, 100.0, 20)
X, Y = np.meshgrid(xr, yr)
Z = A * np.exp(-0.5 * ((X / b)**2.0 + (Y / b)**2.0)) + 5
# Create a MAGsurvey
xyzLoc = np.c_[utils.mkvc(X.T), utils.mkvc(Y.T), utils.mkvc(Z.T)]
rxLoc = mag.Point(xyzLoc)
srcField = mag.SourceField([rxLoc], parameters=H0)
survey = mag.Survey(srcField)
# Create a mesh
h = [5, 5, 5]
padDist = np.ones((3, 2)) * 100
mesh = mesh_builder_xyz(xyzLoc,
h,
padding_distance=padDist,
depth_core=100,
mesh_type="tree")
mesh = refine_tree_xyz(mesh,
topo,
method="surface",
octree_levels=[4, 4],
finalize=True)
self.mesh = mesh
# Define an active cells from topo
actv = utils.surface2ind_topo(mesh, topo)
nC = int(actv.sum())
model = np.zeros((mesh.nC, 3))
# Convert the inclination declination to vector in Cartesian
M_xyz = utils.mat_utils.dip_azimuth2cartesian(M[0], M[1])
# Get the indicies of the magnetized block
ind = utils.model_builder.getIndicesBlock(
np.r_[-20, -20, -10],
np.r_[20, 20, 25],
mesh.gridCC,
)[0]
# Assign magnetization values
model[ind, :] = np.kron(np.ones((ind.shape[0], 1)), M_xyz * 0.05)
# Remove air cells
self.model = model[actv, :]
# Create active map to go from reduce set to full
self.actvMap = maps.InjectActiveCells(mesh, actv, np.nan)
# Creat reduced identity map
idenMap = maps.IdentityMap(nP=nC * 3)
# Create the forward model operator
sim = mag.Simulation3DIntegral(
self.mesh,
survey=survey,
model_type="vector",
chiMap=idenMap,
actInd=actv,
store_sensitivities="disk",
)
self.sim = sim
# Compute some data and add some random noise
data = sim.make_synthetic_data(utils.mkvc(self.model),
relative_error=0.0,
noise_floor=5.0,
add_noise=True)
# This Mapping connects the regularizations for the three-component
# vector model
wires = maps.Wires(("p", nC), ("s", nC), ("t", nC))
# Create three regularization for the different components
# of magnetization
reg_p = regularization.Sparse(mesh, indActive=actv, mapping=wires.p)
reg_p.mref = np.zeros(3 * nC)
reg_s = regularization.Sparse(mesh, indActive=actv, mapping=wires.s)
reg_s.mref = np.zeros(3 * nC)
reg_t = regularization.Sparse(mesh, indActive=actv, mapping=wires.t)
reg_t.mref = np.zeros(3 * nC)
reg = reg_p + reg_s + reg_t
reg.mref = np.zeros(3 * nC)
# Data misfit function
dmis = data_misfit.L2DataMisfit(simulation=sim, data=data)
# dmis.W = 1./survey.std
# Add directives to the inversion
opt = optimization.ProjectedGNCG(maxIter=10,
lower=-10,
upper=10.0,
maxIterLS=5,
maxIterCG=5,
tolCG=1e-4)
invProb = inverse_problem.BaseInvProblem(dmis, reg, opt)
# A list of directive to control the inverson
betaest = directives.BetaEstimate_ByEig(beta0_ratio=1e1)
# Here is where the norms are applied
# Use pick a treshold parameter empirically based on the distribution of
# model parameters
IRLS = directives.Update_IRLS(f_min_change=1e-3,
max_irls_iterations=0,
beta_tol=5e-1)
# Pre-conditioner
update_Jacobi = directives.UpdatePreconditioner()
sensitivity_weights = directives.UpdateSensitivityWeights(
everyIter=False)
inv = inversion.BaseInversion(
invProb,
directiveList=[sensitivity_weights, IRLS, update_Jacobi, betaest])
# Run the inversion
m0 = np.ones(3 * nC) * 1e-4 # Starting model
mrec_MVIC = inv.run(m0)
sim.chiMap = maps.SphericalSystem(nP=nC * 3)
self.mstart = sim.chiMap.inverse(mrec_MVIC)
dmis.simulation.model = self.mstart
beta = invProb.beta
# Create a block diagonal regularization
wires = maps.Wires(("amp", nC), ("theta", nC), ("phi", nC))
# Create a Combo Regularization
# Regularize the amplitude of the vectors
reg_a = regularization.Sparse(mesh, indActive=actv, mapping=wires.amp)
reg_a.norms = np.c_[0.0, 0.0, 0.0,
0.0] # Sparse on the model and its gradients
reg_a.mref = np.zeros(3 * nC)
# Regularize the vertical angle of the vectors
reg_t = regularization.Sparse(mesh,
indActive=actv,
mapping=wires.theta)
reg_t.alpha_s = 0.0 # No reference angle
reg_t.space = "spherical"
reg_t.norms = np.c_[2.0, 0.0, 0.0, 0.0] # Only norm on gradients used
# Regularize the horizontal angle of the vectors
reg_p = regularization.Sparse(mesh, indActive=actv, mapping=wires.phi)
reg_p.alpha_s = 0.0 # No reference angle
reg_p.space = "spherical"
reg_p.norms = np.c_[2.0, 0.0, 0.0, 0.0] # Only norm on gradients used
reg = reg_a + reg_t + reg_p
reg.mref = np.zeros(3 * nC)
Lbound = np.kron(np.asarray([0, -np.inf, -np.inf]), np.ones(nC))
Ubound = np.kron(np.asarray([10, np.inf, np.inf]), np.ones(nC))
# Add directives to the inversion
opt = optimization.ProjectedGNCG(
maxIter=5,
lower=Lbound,
upper=Ubound,
maxIterLS=5,
maxIterCG=5,
tolCG=1e-3,
stepOffBoundsFact=1e-3,
)
opt.approxHinv = None
invProb = inverse_problem.BaseInvProblem(dmis, reg, opt, beta=beta)
# Here is where the norms are applied
IRLS = directives.Update_IRLS(
f_min_change=1e-4,
max_irls_iterations=5,
minGNiter=1,
beta_tol=0.5,
coolingRate=1,
coolEps_q=True,
sphericalDomain=True,
)
# Special directive specific to the mag amplitude problem. The sensitivity
# weights are update between each iteration.
ProjSpherical = directives.ProjectSphericalBounds()
sensitivity_weights = directives.UpdateSensitivityWeights()
update_Jacobi = directives.UpdatePreconditioner()
self.inv = inversion.BaseInversion(
invProb,
directiveList=[
ProjSpherical, IRLS, sensitivity_weights, update_Jacobi
],
)
def setUp(self):
np.random.seed(0)
# Define the inducing field parameter
H0 = (50000, 90, 0)
# Create a mesh
dx = 5.0
hxind = [(dx, 5, -1.3), (dx, 5), (dx, 5, 1.3)]
hyind = [(dx, 5, -1.3), (dx, 5), (dx, 5, 1.3)]
hzind = [(dx, 5, -1.3), (dx, 6)]
self.mesh = discretize.TensorMesh([hxind, hyind, hzind], "CCC")
# Get index of the center
midx = int(self.mesh.nCx / 2)
midy = int(self.mesh.nCy / 2)
# Lets create a simple Gaussian topo and set the active cells
[xx, yy] = np.meshgrid(self.mesh.vectorNx, self.mesh.vectorNy)
zz = -np.exp((xx**2 + yy**2) / 75**2) + self.mesh.vectorNz[-1]
# Go from topo to actv cells
topo = np.c_[utils.mkvc(xx), utils.mkvc(yy), utils.mkvc(zz)]
actv = utils.surface2ind_topo(self.mesh, topo, "N")
actv = np.where(actv)[0]
# Create active map to go from reduce space to full
self.actvMap = maps.InjectActiveCells(self.mesh, actv, -100)
nC = len(actv)
# Create and array of observation points
xr = np.linspace(-20.0, 20.0, 20)
yr = np.linspace(-20.0, 20.0, 20)
X, Y = np.meshgrid(xr, yr)
# Move the observation points 5m above the topo
Z = -np.exp((X**2 + Y**2) / 75**2) + self.mesh.vectorNz[-1] + 5.0
# Create a MAGsurvey
rxLoc = np.c_[utils.mkvc(X.T), utils.mkvc(Y.T), utils.mkvc(Z.T)]
rxLoc = mag.Point(rxLoc)
srcField = mag.SourceField([rxLoc], parameters=H0)
survey = mag.Survey(srcField)
# We can now create a susceptibility model and generate data
# Here a simple block in half-space
model = np.zeros((self.mesh.nCx, self.mesh.nCy, self.mesh.nCz))
model[(midx - 2):(midx + 2), (midy - 2):(midy + 2), -6:-2] = 0.02
model = utils.mkvc(model)
self.model = model[actv]
# Create active map to go from reduce set to full
self.actvMap = maps.InjectActiveCells(self.mesh, actv, -100)
# Creat reduced identity map
idenMap = maps.IdentityMap(nP=nC)
# Create the forward model operator
sim = mag.Simulation3DIntegral(
self.mesh,
survey=survey,
chiMap=idenMap,
actInd=actv,
store_sensitivities="disk",
)
self.sim = sim
# Compute linear forward operator and compute some data
data = sim.make_synthetic_data(self.model,
relative_error=0.0,
noise_floor=1.0,
add_noise=True)
# Create a regularization
reg = regularization.Sparse(self.mesh, indActive=actv, mapping=idenMap)
reg.norms = np.c_[0, 0, 0, 0]
reg.gradientType = "component"
# reg.eps_p, reg.eps_q = 1e-3, 1e-3
# Data misfit function
dmis = data_misfit.L2DataMisfit(simulation=sim, data=data)
# dmis.W = 1/wd
# Add directives to the inversion
opt = optimization.ProjectedGNCG(maxIter=100,
lower=0.0,
upper=1.0,
maxIterLS=20,
maxIterCG=10,
tolCG=1e-3)
invProb = inverse_problem.BaseInvProblem(dmis, reg, opt)
betaest = directives.BetaEstimate_ByEig()
# Here is where the norms are applied
IRLS = directives.Update_IRLS(f_min_change=1e-4, minGNiter=1)
update_Jacobi = directives.UpdatePreconditioner()
sensitivity_weights = directives.UpdateSensitivityWeights(
everyIter=False)
self.inv = inversion.BaseInversion(
invProb,
directiveList=[IRLS, sensitivity_weights, betaest, update_Jacobi])
def run(plotIt=True):
H0 = (50000.0, 90.0, 0.0)
# Create a mesh
dx = 5.0
hxind = [(dx, 5, -1.3), (dx, 10), (dx, 5, 1.3)]
hyind = [(dx, 5, -1.3), (dx, 10), (dx, 5, 1.3)]
hzind = [(dx, 5, -1.3), (dx, 10)]
mesh = discretize.TensorMesh([hxind, hyind, hzind], "CCC")
# Lets create a simple Gaussian topo and set the active cells
[xx, yy] = np.meshgrid(mesh.vectorNx, mesh.vectorNy)
zz = -np.exp((xx ** 2 + yy ** 2) / 75 ** 2) + mesh.vectorNz[-1]
# We would usually load a topofile
topo = np.c_[utils.mkvc(xx), utils.mkvc(yy), utils.mkvc(zz)]
# Go from topo to array of indices of active cells
actv = utils.surface2ind_topo(mesh, topo, "N")
actv = np.where(actv)[0]
# Create and array of observation points
xr = np.linspace(-20.0, 20.0, 20)
yr = np.linspace(-20.0, 20.0, 20)
X, Y = np.meshgrid(xr, yr)
# Move the observation points 5m above the topo
Z = -np.exp((X ** 2 + Y ** 2) / 75 ** 2) + mesh.vectorNz[-1] + 5.0
# Create a MAGsurvey
rxLoc = np.c_[utils.mkvc(X.T), utils.mkvc(Y.T), utils.mkvc(Z.T)]
rxLoc = magnetics.Point(rxLoc)
srcField = magnetics.SourceField([rxLoc], parameters=H0)
survey = magnetics.Survey(srcField)
# We can now create a susceptibility model and generate data
model = np.zeros(mesh.nC)
# Change values in half the domain
model[mesh.gridCC[:, 0] < 0] = 0.01
# Add a block in half-space
model = utils.model_builder.addBlock(
mesh.gridCC, model, np.r_[-10, -10, 20], np.r_[10, 10, 40], 0.05
)
model = utils.mkvc(model)
model = model[actv]
# Create active map to go from reduce set to full
actvMap = maps.InjectActiveCells(mesh, actv, np.nan)
# Create reduced identity map
idenMap = maps.IdentityMap(nP=len(actv))
# Create the forward model operator
prob = magnetics.Simulation3DIntegral(
mesh,
survey=survey,
chiMap=idenMap,
actInd=actv,
store_sensitivities="forward_only",
)
# Compute linear forward operator and compute some data
data = prob.make_synthetic_data(
model, relative_error=0.0, noise_floor=1, add_noise=True
)
# Create a homogenous maps for the two domains
domains = [mesh.gridCC[actv, 0] < 0, mesh.gridCC[actv, 0] >= 0]
homogMap = maps.SurjectUnits(domains)
# Create a wire map for a second model space, voxel based
wires = maps.Wires(("h**o", len(domains)), ("hetero", len(actv)))
# Create Sum map
sumMap = maps.SumMap([homogMap * wires.h**o, wires.hetero])
# Create the forward model operator
prob = magnetics.Simulation3DIntegral(
mesh, survey=survey, chiMap=sumMap, actInd=actv, store_sensitivities="ram"
)
# Make depth weighting
wr = np.zeros(sumMap.shape[1])
print(prob.nC)
# print(prob.M.shape) # why does this reset nC
G = prob.G
# Take the cell number out of the scaling.
# Want to keep high sens for large volumes
scale = utils.sdiag(
np.r_[utils.mkvc(1.0 / homogMap.P.sum(axis=0)), np.ones_like(actv)]
)
for ii in range(survey.nD):
wr += (
(prob.G[ii, :] * prob.chiMap.deriv(np.ones(sumMap.shape[1]) * 1e-4) * scale)
/ data.standard_deviation[ii]
) ** 2.0
# Scale the model spaces independently
wr[wires.h**o.index] /= np.max((wires.h**o * wr))
wr[wires.hetero.index] /= np.max(wires.hetero * wr)
wr = wr ** 0.5
## Create a regularization
# For the homogeneous model
regMesh = discretize.TensorMesh([len(domains)])
reg_m1 = regularization.Sparse(regMesh, mapping=wires.h**o)
reg_m1.cell_weights = wires.h**o * wr
reg_m1.norms = np.c_[0, 2, 2, 2]
reg_m1.mref = np.zeros(sumMap.shape[1])
# Regularization for the voxel model
reg_m2 = regularization.Sparse(mesh, indActive=actv, mapping=wires.hetero)
reg_m2.cell_weights = wires.hetero * wr
reg_m2.norms = np.c_[0, 1, 1, 1]
reg_m2.mref = np.zeros(sumMap.shape[1])
reg = reg_m1 + reg_m2
# Data misfit function
dmis = data_misfit.L2DataMisfit(simulation=prob, data=data)
# Add directives to the inversion
opt = optimization.ProjectedGNCG(
maxIter=100,
lower=0.0,
upper=1.0,
maxIterLS=20,
maxIterCG=10,
tolCG=1e-3,
tolG=1e-3,
eps=1e-6,
)
invProb = inverse_problem.BaseInvProblem(dmis, reg, opt)
betaest = directives.BetaEstimate_ByEig()
# Here is where the norms are applied
# Use pick a threshold parameter empirically based on the distribution of
# model parameters
IRLS = directives.Update_IRLS(f_min_change=1e-3, minGNiter=1)
update_Jacobi = directives.UpdatePreconditioner()
inv = inversion.BaseInversion(invProb, directiveList=[IRLS, betaest, update_Jacobi])
# Run the inversion
m0 = np.ones(sumMap.shape[1]) * 1e-4 # Starting model
prob.model = m0
mrecSum = inv.run(m0)
if plotIt:
mesh.plot_3d_slicer(
actvMap * model,
aspect="equal",
zslice=30,
pcolorOpts={"cmap": "inferno_r"},
transparent="slider",
)
mesh.plot_3d_slicer(
actvMap * sumMap * mrecSum,
aspect="equal",
zslice=30,
pcolorOpts={"cmap": "inferno_r"},
transparent="slider",
)