def configureExtrapolator(egammaExtrapolator):
# this turns off dynamic calculation of eloss in calorimeters
egammaExtrapolator.DoCaloDynamic = False
# all left to MaterialEffects/EnergyLossUpdators
from TrkExTools.TrkExToolsConf import (Trk__MaterialEffectsUpdator as
MaterialEffectsUpdator)
egammaMaterialEffectsUpdator = MaterialEffectsUpdator(
name='egammaMaterialEffectsUpdator')
egammaNoElossMaterialEffectsUpdator = MaterialEffectsUpdator(
name='egammaNoElossMaterialEffectsUpdator')
egammaNoElossMaterialEffectsUpdator.EnergyLoss = False
MyUpdators = []
MyUpdators += [egammaMaterialEffectsUpdator]
MyUpdators += [egammaNoElossMaterialEffectsUpdator]
MySubUpdators = []
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for Global
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for ID
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for BeamPipe
MySubUpdators += [egammaNoElossMaterialEffectsUpdator.name()] # for Calo
# for muon spectrometer
MySubUpdators += [egammaNoElossMaterialEffectsUpdator.name()]
MySubUpdators += [egammaMaterialEffectsUpdator.name()] # for cavern
# egamma RungeKutta Propagator
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import (
Trk__RungeKuttaPropagator as RkPropagator)
egammaRungeKuttaPropagator = RkPropagator(
name='egammaRungeKuttaPropagator')
# egamma STEP_Propagator with no material effects
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import (
Trk__STEP_Propagator as STEP_Propagator)
egammaNoMatSTEP_Propagator = STEP_Propagator(
name='egammaNoMatSTEP_Propagator')
egammaNoMatSTEP_Propagator.MaterialEffects = False
myPropagators = []
myPropagators += [egammaRungeKuttaPropagator]
myPropagators += [egammaNoMatSTEP_Propagator]
MySubPropagators = []
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for Global
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for ID
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for BeamPipe
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for Calo
MySubPropagators += [egammaNoMatSTEP_Propagator.name()] # for MS
MySubPropagators += [egammaRungeKuttaPropagator.name()] # for cavern
egammaExtrapolator.MaterialEffectsUpdators = MyUpdators
egammaExtrapolator.SubMEUpdators = MySubUpdators
egammaExtrapolator.Propagators = myPropagators
egammaExtrapolator.SubPropagators = MySubPropagators
# egamma STEP with no eloss for calo intersections
egammaExtrapolator.STEP_Propagator = egammaNoMatSTEP_Propagator
HLTMonManager.AthenaMonTools += montool
###### Run Zee part if calo is present #############
if rec.doCalo:
##########################################################################################################
# Configure the extrapolator
##########################################################################################################
from TrkExTools.AtlasExtrapolator import AtlasExtrapolator
theAtlasExtrapolator = AtlasExtrapolator(name='egammaExtrapolator')
theAtlasExtrapolator.DoCaloDynamic = False # this turns off dynamic calculation of eloss in calorimeters
# all left to MaterialEffects/EnergyLossUpdators
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
AtlasMaterialEffectsUpdator = MaterialEffectsUpdator(
name='AtlasMaterialEffectsUpdator')
ToolSvc += AtlasMaterialEffectsUpdator #default material effects updator
NoElossMaterialEffectsUpdator = MaterialEffectsUpdator(
name='NoElossMaterialEffectsUpdator')
NoElossMaterialEffectsUpdator.EnergyLoss = False
ToolSvc += NoElossMaterialEffectsUpdator
# setup MaterialEffectsUpdator arrays
MyUpdators = []
# MyUpdators += [AtlasMaterialEffectsUpdator] # for ID
MyUpdators += [NoElossMaterialEffectsUpdator] # for ID
MyUpdators += [NoElossMaterialEffectsUpdator] # for Calo
MyUpdators += [NoElossMaterialEffectsUpdator] # for muon
# MyUpdators += [NoElossMaterialEffectsUpdator] # for muon
MySubUpdators = []
TestPropagators += [TestPropagator]
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as STEP_Propagator
TestSTEP_Propagator = STEP_Propagator(name='TestSTEP_Propagator')
ToolSvc += TestSTEP_Propagator
TestSTEP_Propagator.DetailedEloss = True
TestPropagators += [TestSTEP_Propagator]
# UPDATOR DEFAULTS -----------------------------------------------------------------------------------------
TestUpdators = []
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
TestMaterialEffectsUpdator = MaterialEffectsUpdator(
name='TestMaterialEffectsUpdator')
ToolSvc += TestMaterialEffectsUpdator
if myPDG == 998:
TestMaterialEffectsUpdator.EnergyLoss = False
TestMaterialEffectsUpdator.MultipleScattering = False
TestUpdators += [TestMaterialEffectsUpdator]
TestMaterialEffectsUpdatorLandau = MaterialEffectsUpdator(
name='TestMaterialEffectsUpdatorLandau')
TestMaterialEffectsUpdatorLandau.LandauMode = True
ToolSvc += TestMaterialEffectsUpdatorLandau
if myPDG == 998:
TestMaterialEffectsUpdatorLandau.EnergyLoss = False
TestMaterialEffectsUpdatorLandau.MultipleScattering = False
def getPhotonConversionTool():
if jobproperties.tauRecFlags.useVertexBasedConvFinder():
from AthenaCommon.AppMgr import ToolSvc
name = "_PhotonConversionVertex"
##
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
AtlasMaterialEffectsUpdator = MaterialEffectsUpdator(
name='AtlasMaterialEffectsUpdator')
ToolSvc += AtlasMaterialEffectsUpdator #default material effects updator
NoElossMaterialEffectsUpdator = MaterialEffectsUpdator(
name='NoElossMaterialEffectsUpdator')
NoElossMaterialEffectsUpdator.EnergyLoss = False
ToolSvc += NoElossMaterialEffectsUpdator
# setup MaterialEffectsUpdator arrays
MyUpdators = []
MyUpdators += [AtlasMaterialEffectsUpdator] # for ID
MyUpdators += [NoElossMaterialEffectsUpdator] # for Calo
# MyUpdators += [NoElossMaterialEffectsUpdator] # for muon
MySubUpdators = []
MySubUpdators += [AtlasMaterialEffectsUpdator.name()] # for ID
MySubUpdators += [NoElossMaterialEffectsUpdator.name()] # for Calo
MySubUpdators += [NoElossMaterialEffectsUpdator.name()] # for muon
#Configure the extrapolator
from TrkExTools.AtlasExtrapolator import AtlasExtrapolator
theAtlasExtrapolator = AtlasExtrapolator(name='theAtlasExtrapolator' +
name)
theAtlasExtrapolator.DoCaloDynamic = False # this turns off dynamic
theAtlasExtrapolator.MaterialEffectsUpdators = MyUpdators
theAtlasExtrapolator.SubMEUpdators = MySubUpdators
ToolSvc += theAtlasExtrapolator
# from TrkMagFieldTools.TrkMagFieldToolsConf import Trk__MagneticFieldTool
# InDetMagField = Trk__MagneticFieldTool('InDetMagField'+name)
# ToolSvc += InDetMagField
### Ly S swith bellow off Oct 7
# from AthenaCommon.AppMgr import ServiceMgr
# from MagFieldServices.MagFieldServicesConf import MagField__AtlasFieldSvc
# ServiceMgr += MagField__AtlasFieldSvc("myAtlasFieldSvc")
#
# Setup track summary tool
#
from InDetAssociationTools.InDetAssociationToolsConf import InDet__InDetPRD_AssociationToolGangedPixels
tauInDetPrdAssociationTool = InDet__InDetPRD_AssociationToolGangedPixels(
name="tauInDetPrdAssociationTool",
PixelClusterAmbiguitiesMapName='PixelClusterAmbiguitiesMap')
ToolSvc += tauInDetPrdAssociationTool
from InDetRecExample.InDetJobProperties import InDetFlags
from InDetTrackHoleSearch.InDetTrackHoleSearchConf import InDet__InDetTrackHoleSearchTool
tauInDetHoleSearchTool = InDet__InDetTrackHoleSearchTool(
name="tauInDetHoleSearchTool",
Extrapolator=theAtlasExtrapolator,
checkBadSCTChip=InDetFlags.checkDeadElementsOnTrack())
ToolSvc += tauInDetHoleSearchTool
from AthenaCommon.DetFlags import DetFlags
from InDetTrackSummaryHelperTool.InDetTrackSummaryHelperToolConf import InDet__InDetTrackSummaryHelperTool
tauInDetTrackSummaryHelperTool = InDet__InDetTrackSummaryHelperTool(
name="tauInDetTrackSummaryHelper",
AssoTool=tauInDetPrdAssociationTool,
DoSharedHits=False,
HoleSearch=tauInDetHoleSearchTool,
usePixel=DetFlags.haveRIO.pixel_on(),
useSCT=DetFlags.haveRIO.SCT_on(),
useTRT=DetFlags.haveRIO.TRT_on())
ToolSvc += tauInDetTrackSummaryHelperTool
# from TrkTrackSummaryTool.AtlasTrackSummaryTool import AtlasTrackSummaryTool
# MyInDetTrackSummaryTool = AtlasTrackSummaryTool(
# InDetSummaryHelperTool = tauInDetTrackSummaryHelperTool,
# doSharedHits = False )
from TrkTrackSummaryTool.TrkTrackSummaryToolConf import Trk__TrackSummaryTool
MyInDetTrackSummaryTool = Trk__TrackSummaryTool(
name="MyInDetTrackSummaryTool",
InDetSummaryHelperTool=tauInDetTrackSummaryHelperTool,
doSharedHits=False,
InDetHoleSearchTool=tauInDetHoleSearchTool)
ToolSvc += MyInDetTrackSummaryTool
from TrkVKalVrtFitter.TrkVKalVrtFitterConf import Trk__TrkVKalVrtFitter
InDetConversionVxFitterTool = Trk__TrkVKalVrtFitter(
name="InDetConversionVxFitter" + name,
Extrapolator=theAtlasExtrapolator,
# Extrapolator = "Trk::Extrapolator/AtlasExtrapolator",
IterationNumber=30,
MakeExtendedVertex=True,
FirstMeasuredPoint=False,
# MagFieldSvc = InDetMagField,
## MagFieldSvc="Trk::MagneticFieldTool/InDetMagField",
# AtlasMagFieldSvc="myAtlasFieldSvc",
Robustness=6,
usePhiCnst=True,
useThetaCnst=True,
FirstMeasuredPointLimit=True,
InputParticleMasses=[0.511, 0.511],
VertexForConstraint=[0., 0., 0.],
CovVrtForConstraint=[
0.015 * 0.015, 0., 0.015 * 0.015, 0., 0., 10000. * 10000.
])
ToolSvc += InDetConversionVxFitterTool
print InDetConversionVxFitterTool
# Distance of minimum approach utility
#
from TrkVertexSeedFinderUtils.TrkVertexSeedFinderUtilsConf import Trk__SeedNewtonTrkDistanceFinder
InDetConversionTrkDistanceFinder = Trk__SeedNewtonTrkDistanceFinder(
name='InDetConversionTrkDistanceFinder' + name)
ToolSvc += InDetConversionTrkDistanceFinder
print InDetConversionTrkDistanceFinder
# Straight line propagator needed to clean-up single track conversions
#
# from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as Propagator
# Helper Tool
#
from InDetConversionFinderTools.InDetConversionFinderToolsConf import InDet__ConversionFinderUtils
InDetConversionHelper = InDet__ConversionFinderUtils(
name="InDetConversionFinderUtils" + name)
ToolSvc += InDetConversionHelper
print InDetConversionHelper
# Track selector tool
#
from InDetTrackSelectorTool.InDetTrackSelectorToolConf import InDet__InDetConversionTrackSelectorTool
InDetConversionTrackSelector = InDet__InDetConversionTrackSelectorTool(
name="InDetConversionTrackSelector" + name,
TrackSummaryTool=MyInDetTrackSummaryTool,
Extrapolator=theAtlasExtrapolator,
maxSiD0=10000., #50.0,
maxTrtD0=10000., #100.,
maxSiZ0=10000., #350.0,
maxTrtZ0=10000., #1400.,
minPt=300, #InDetNewTrackingCuts.minSecondaryPt()
RatioCut1=0.0, #0.5,
RatioCut2=0.05,
RatioCut3=0.05,
RatioTRT=0.05,
IsConversion=True,
significanceD0_Si=-1.,
RatioV0=-1.)
ToolSvc += InDetConversionTrackSelector
print InDetConversionTrackSelector
# Track pairs selector
#
## There are many tunings on Oct 5
from InDetConversionFinderTools.InDetConversionFinderToolsConf import InDet__TrackPairsSelector
InDetConversionTrackPairsSelector = InDet__TrackPairsSelector(
name="InDetConversionTrackPairsSelector" + name,
ConversionFinderHelperTool=InDetConversionHelper,
DistanceTool=InDetConversionTrkDistanceFinder,
# MaxEta = [0.12,10000.,10000.], #[0.5,1.0,0.5])
MaxEta=[0.15, 0.3, 0.5], #[0.5,1.0,0.5])
# MaxDistBetweenTracks = [6.6,10000.,10000.], #[6.,80.,30.]
MaxDistBetweenTracks=[7.5, 15., 30.], #[6.,80.,30.]
MaxInitDistance=[10000., 10000., 10000.],
MinTrackAngle=0.)
ToolSvc += InDetConversionTrackPairsSelector
print InDetConversionTrackPairsSelector
# Vertex point estimator
#
from InDetConversionFinderTools.InDetConversionFinderToolsConf import InDet__VertexPointEstimator
InDetConversionVtxPointEstimator = InDet__VertexPointEstimator(
name="InDetConversionVtxPointEstimator" + name,
MaxTrkXYDiffAtVtx=[10000., 10000., 10000.],
MaxTrkZDiffAtVtx=[10000., 10000., 10000.],
MaxTrkXYValue=[10000., 10000., 10000.],
MinArcLength=[-10000., -10000., -10000.],
MaxArcLength=[10000., 10000., 10000.],
MinDeltaR=[-5., -25., -50.],
# MaxDeltaR = [10000.,10000.,10000.],
MaxDeltaR=[5., 10., 10.],
# MaxHl = [10000.,10000.,10000.],
# MaxPhi = [0.034, 10000., 10000.] #[0.05, 0.1, 0.1]
# MaxPhi = [ 10000., 10000., 10000.]
MaxPhi=[0.05, 0.1, 0.2])
ToolSvc += InDetConversionVtxPointEstimator
print InDetConversionVtxPointEstimator
# Conversion post selector
#
from InDetConversionFinderTools.InDetConversionFinderToolsConf import InDet__ConversionPostSelector
InDetConversionPostSelector = InDet__ConversionPostSelector(
name="InDetConversionPostSelector" + name,
# MaxChi2Vtx = [10000.,10000.,10000.], #[40.,100.,80.],
MaxChi2Vtx=[500., 700., 900.], #[40.,100.,80.],
# MaxInvariantMass = [45.,25000.,25000.], #[60.,60.,30.],
MaxInvariantMass=[350., 400., 500.], #[60.,60.,30.],
MinFitMomentum=[0., 0., 0.], #[2000.,2000.,2000.],
MinRadius=[21, 20., 15.], #[30.,35.,250.],
# MinRadius = [ -10000.0, -10000.0, -10000.0 ], #[30.,35.,250.],
MinPt=0.,
# MaxdR = 10000., #-250.,
## equivalent to InDetConversionFinderTools.MaxDistVtxHit
MaxdR=-10000., #-250.,
# MaxPhiVtxTrk = 0.046 #0.2
MaxPhiVtxTrk=0.05)
ToolSvc += InDetConversionPostSelector
print InDetConversionPostSelector
# Single track conversion tool
#
from InDetConversionFinderTools.InDetConversionFinderToolsConf import InDet__SingleTrackConversionTool
InDetSingleTrackConversion = InDet__SingleTrackConversionTool(
name="InDetSingleTrackConversionTool" + name,
ConversionFinderHelperTool=InDetConversionHelper,
TrackSummaryTool=MyInDetTrackSummaryTool,
Extrapolator=theAtlasExtrapolator,
MaxBLayerHits=0,
MinInitialHitRadius=70.,
MinInitialHitRadius_noBlay=90.,
MinRatioOfHLhits=0.95)
ToolSvc += InDetSingleTrackConversion
print InDetSingleTrackConversion
## Oct 5, following egamma
from InDetConversionFinderTools.InDetConversionFinderToolsConf import InDet__InDetConversionFinderTools
MyInDetConversionFinderTools = InDet__InDetConversionFinderTools(
name="InDetConversionFinderTools" + name,
VertexFitterTool=InDetConversionVxFitterTool,
TrackSelectorTool=InDetConversionTrackSelector,
TrackPairsSelector=InDetConversionTrackPairsSelector,
ConversionFinderHelperTool=InDetConversionHelper,
VertexPointEstimator=InDetConversionVtxPointEstimator,
PostSelector=InDetConversionPostSelector,
SingleTrackConversionTool=InDetSingleTrackConversion,
Extrapolator=theAtlasExtrapolator,
TrackParticleCollection="InDetTrackParticles",
# MinDistVtxHit = -10000.,
MinDistVtxHit=-350.,
MaxDistVtxHit=230.,
MinFlightAngle=0.0,
MinInitVtxR=0.0,
RemoveTrtTracks=False,
IsConversion=True)
ToolSvc += MyInDetConversionFinderTools
print MyInDetConversionFinderTools
from tauRecTools.tauRecToolsConf import PhotonConversionVertex
photonConv = PhotonConversionVertex(
name="PhotonConversionVertex",
TauRecContainer="TauJets",
TrackParticleContainer="InDetTrackParticles",
OutputConversionVertexContainerName="ConversionsVertex_Container",
MaxTauJetDr=0.5,
ConversionFinderTool=MyInDetConversionFinderTools)
return photonConv
else:
from tauRecTools.tauRecToolsConf import PhotonConversionPID
photonConv = PhotonConversionPID(
ConversionCandidatesName="ConversionCandidate",
ConversionOutputName="ConversionsPID_Container",
ElectronProbability=0.9)
return photonConv
def __init__(self, name='AtlasExtrapolator'):
# get the correct TrackingGeometry setup
from TrkDetDescrSvc.AtlasTrackingGeometrySvc import AtlasTrackingGeometrySvc
from AthenaCommon.AppMgr import ServiceMgr as svcMgr
AtlasTrackingGeometrySvc = svcMgr.AtlasTrackingGeometrySvc
# import the ToolSvc
from AthenaCommon.AppMgr import ToolSvc
if 'ToolSvc' not in dir():
ToolSvc = ToolSvc()
# PROPAGATOR DEFAULTS --------------------------------------------------------------------------------------
self.AtlasPropagators = []
from TrkExRungeKuttaPropagator.TrkExRungeKuttaPropagatorConf import Trk__RungeKuttaPropagator as RkPropagator
AtlasRungeKuttaPropagator = RkPropagator(
name='AtlasRungeKuttaPropagator')
ToolSvc += AtlasRungeKuttaPropagator
self.AtlasPropagators += [AtlasRungeKuttaPropagator]
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as STEP_Propagator
AtlasSTEP_Propagator = STEP_Propagator(name='AtlasSTEP_Propagator')
ToolSvc += AtlasSTEP_Propagator
self.AtlasPropagators += [AtlasSTEP_Propagator]
# UPDATOR DEFAULTS -----------------------------------------------------------------------------------------
self.AtlasUpdators = []
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
AtlasMaterialEffectsUpdator = MaterialEffectsUpdator(
name='AtlasMaterialEffectsUpdator')
ToolSvc += AtlasMaterialEffectsUpdator
self.AtlasUpdators += [AtlasMaterialEffectsUpdator]
AtlasMaterialEffectsUpdatorLandau = MaterialEffectsUpdator(
name='AtlasMaterialEffectsUpdatorLandau')
AtlasMaterialEffectsUpdatorLandau.LandauMode = True
ToolSvc += AtlasMaterialEffectsUpdatorLandau
self.AtlasUpdators += [AtlasMaterialEffectsUpdatorLandau]
# the UNIQUE NAVIGATOR ( === UNIQUE GEOMETRY) --------------------------------------------------------------
from TrkExTools.TrkExToolsConf import Trk__Navigator
AtlasNavigator = Trk__Navigator(name='AtlasNavigator')
AtlasNavigator.TrackingGeometrySvc = AtlasTrackingGeometrySvc
ToolSvc += AtlasNavigator
# CONFIGURE PROPAGATORS/UPDATORS ACCORDING TO GEOMETRY SIGNATURE
AtlasSubPropagators = []
AtlasSubUpdators = []
# -------------------- set it depending on the geometry ----------------------------------------------------
# default for Global is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for ID is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for BeamPipe is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for Calo is (STEP,Mat)
AtlasSubPropagators += [AtlasSTEP_Propagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for MS is (STEP,Mat)
AtlasSubPropagators += [AtlasSTEP_Propagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# default for Cavern is (Rk,Mat)
AtlasSubPropagators += [AtlasRungeKuttaPropagator.name()]
AtlasSubUpdators += [AtlasMaterialEffectsUpdator.name()]
# ----------------------------------------------------------------------------------------------------------
# call the base class constructor
Trk__Extrapolator.__init__(self,name,\
Navigator = AtlasNavigator,\
MaterialEffectsUpdators = self.AtlasUpdators,\
Propagators = self.AtlasPropagators,\
SubPropagators = AtlasSubPropagators,\
SubMEUpdators = AtlasSubUpdators,\
DoCaloDynamic = False
)
ToolSvc += AtlasRungeKuttaPropagator
AtlasPropagators += [AtlasRungeKuttaPropagator]
from TrkExSTEP_Propagator.TrkExSTEP_PropagatorConf import Trk__STEP_Propagator as STEP_Propagator
AtlasSTEP_Propagator = STEP_Propagator(name = 'AtlasSTEP_Propagator')
ToolSvc += AtlasSTEP_Propagator
AtlasPropagators += [AtlasSTEP_Propagator]
# UPDATOR DEFAULTS -----------------------------------------------------------------------------------------
AtlasUpdators = []
from TrkExTools.TrkExToolsConf import Trk__MaterialEffectsUpdator as MaterialEffectsUpdator
AtlasMaterialEffectsUpdator = MaterialEffectsUpdator(name = 'AtlasMaterialEffectsUpdator')
ToolSvc += AtlasMaterialEffectsUpdator
AtlasUpdators += [ AtlasMaterialEffectsUpdator ]
AtlasMaterialEffectsUpdatorLandau = MaterialEffectsUpdator(name = 'AtlasMaterialEffectsUpdatorLandau')
AtlasMaterialEffectsUpdatorLandau.LandauMode = True
ToolSvc += AtlasMaterialEffectsUpdatorLandau
AtlasUpdators += [ AtlasMaterialEffectsUpdatorLandau ]
# CONFIGURE PROPAGATORS/UPDATORS ACCORDING TO GEOMETRY SIGNATURE
AtlasSubPropagators = []
AtlasSubUpdators = []