def readPartcase(self):
varNotFound = []
for v in self._part.variables:
if getExistingFilename(v.filename) == None:
self._part.variables.remove(v)
varNotFound.append( v.filename )
else:
self._dataFileNames[ v.name ] = v.filename
self._dataVariableType[ v.name ] = v.variableDimension
# check if file is transient
self._isTransient = False
filename = getExistingFilename(self._part.filename)
if filename == None:
raise CoviseFileNotFoundError(self._part.filename)
in_file = open(filename, "rb") # open in binary mode (makes a difference on windows (read() may stop too early))
# first check if we have TIMESTEP at the end
in_file.seek(-100, os.SEEK_END)
tail = in_file.read(100)
if b"TIMESTEP" in tail:
self._isTransient = True
else:
# if not already recognized as transient, check if we have SETELE at the beginning
head = in_file.read(100)
if b"SETELE" in head:
# if we have, check the entire file since we might have nested sets
in_file.seek(0, os.SEEK_BEGIN)
line = in_file.readline()
while line:
if b"TIMESTEP" in line:
self._isTransient = True
break
line = in_file.readline()
in_file.close()
return varNotFound
def recreate(self, negMsgHandler, parentKey, offset):
VrmlVisParams.mergeDefaultParams(
self.params) # explicitly call mergeDefaultParams of this class
self.__initBase()
VisItem.recreate(self, negMsgHandler, parentKey, offset)
if getExistingFilename(self.params.filename) == None:
raise CoviseFileNotFoundError(self.params.filename)
def __update(self, negMsgHandler):
""" __update is called from the run method to update the module parameter before execution
+ update module parameters """
_infoer.function = str(self.__update)
_infoer.write(" ")
self.__init(negMsgHandler)
#update params
# check if filename exists
if getExistingFilename(self.params.filename) == None:
raise IOError(self.params.filename)
"""
fn = os.path.basename(filename)
# if a path allready was selected
if not _newPath == None:
fname = VRPCoviseNetAccess._newPath + fn
# test new path
if not os.access(fname, os.R_OK):
filename = VRPCoviseNetAccess.changePath(filename, fn)
else:
filename = fname
else:
filename = VRPCoviseNetAccess.changePath(filename , fn)
"""
self.rwCovise.set_grid_path(self.params.filename)
self.rwCovise.set_stepNo(self.params.stepNo)
if (self.params.rotate_output == True):
self.rwCovise.set_rotate_output('TRUE')
else:
self.rwCovise.set_rotate_output('FALSE')
self.rwCovise.set_rotation_axis(self.params.rotation_axis)
self.rwCovise.set_rot_speed(self.params.rot_speed)
def recreate(self, negMsgHandler, parentKey, offset):
""" recreate is called after all classes of the session have been unpickled """
_infoer.function = str(self.recreate)
_infoer.write(" ")
coDocumentMgrParams.mergeDefaultParams(self.params) # explicitly call mergeDefaultParams of this class
self.__initBase()
VisItem.recreate(self, negMsgHandler, parentKey, offset)
self.params.changed = False
if getExistingFilename(self.params.imageName) == None:
raise CoviseFileNotFoundError(self.params.imageName)
def recreate(self, negMsgHandler, parentKey, offset):
""" recreate is called after all classes of the session have been unpickled """
_infoer.function = str(self.recreate)
_infoer.write(" ")
coDocumentMgrParams.mergeDefaultParams(
self.params) # explicitly call mergeDefaultParams of this class
self.__initBase()
VisItem.recreate(self, negMsgHandler, parentKey, offset)
self.params.changed = False
if getExistingFilename(self.params.imageName) == None:
raise CoviseFileNotFoundError(self.params.imageName)
def readPartcase(self):
varNotFound = []
for v in self._part.variables:
if getExistingFilename(v.filename) == None:
self._part.variables.remove(v)
varNotFound.append(v.filename)
else:
self._dataFileNames[v.name] = v.filename
self._dataVariableType[v.name] = v.variableDimension
# check if file is transient
self._isTransient = False
filename = getExistingFilename(self._part.filename)
if filename == None:
raise CoviseFileNotFoundError(self._part.filename)
in_file = open(
filename, "rb"
) # open in binary mode (makes a difference on windows (read() may stop too early))
# first check if we have TIMESTEP at the end
in_file.seek(-100, os.SEEK_END)
tail = in_file.read(100)
if b"TIMESTEP" in tail:
self._isTransient = True
else:
# if not already recognized as transient, check if we have SETELE at the beginning
head = in_file.read(100)
if b"SETELE" in head:
# if we have, check the entire file since we might have nested sets
in_file.seek(0, os.SEEK_BEGIN)
line = in_file.readline()
while line:
if b"TIMESTEP" in line:
self._isTransient = True
break
line = in_file.readline()
in_file.close()
return varNotFound
def setGridPath(self, filename, doWrite = False):
# check if filename exists
if not doWrite and (getExistingFilename(filename) == None):
#raise IOError(filename)
raise CoviseFileNotFoundError(filename)
"""
fn = os.path.basename(filename)
# if a path allready was selected
if not _newPath == None:
fname = _newPath + fn
# test new path
if not os.access(fname, os.R_OK):
filename = changePath(filename, fn)
else:
filename = fname
else:
filename = changePath(filename , fn)
"""
self._module.set_grid_path(filename)
self.__gridPath = filename
def recreate(self, negMsgHandler, parentKey, offset):
VrmlVisParams.mergeDefaultParams(self.params) # explicitly call mergeDefaultParams of this class
self.__initBase()
VisItem.recreate(self, negMsgHandler, parentKey, offset)
if getExistingFilename(self.params.filename) == None:
raise CoviseFileNotFoundError(self.params.filename)
def setParamsCB(self, requestNr, key, params):
""" received params from negotiator """
_infoer.write('setParamsCB(requestNr %s, key %s, paramName= %s)' %
(str(requestNr), str(key), str(params.name)))
if not key in self.__objects:
return
self.__objects[key].params = params
self.sigGuiParamChanged.emit(key)
#for compatibility
Application.vrpApp.key2params[key] = params
typeNr = self.__objects[key].type
if (typeNr in [
TYPE_SCENEGRAPH_ITEM, TYPE_COLOR_CREATOR, TYPE_COLOR_MGR,
VIS_DOMAINLINES, TYPE_SCENEGRAPH_MGR, TYPE_DNA_MGR,
TYPE_DNA_ITEM, TYPE_GENERIC_OBJECT_MGR, TYPE_GENERIC_OBJECT,
TYPE_JOURNAL_STEP, TYPE_PROJECT, TYPE_CASE, TYPE_2D_GROUP,
TYPE_3D_GROUP, TYPE_2D_CUTGEOMETRY_PART
]):
pass
elif typeNr in [
VIS_STREAMLINE, VIS_MOVING_POINTS, VIS_PATHLINES,
VIS_STREAMLINE_2D, VIS_PLANE, VIS_VECTOR, VIS_ISOPLANE,
VIS_ISOCUTTER, VIS_CLIPINTERVAL, VIS_VECTORFIELD,
VIS_DOMAINSURFACE
]: #, VIS_POINTPROBING, VIS_MAGMATRACE
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
self.checkForUpdate(key, params)
elif TYPE_CAD_PART == typeNr: #TYPE_2D_PART == typeNr or
""" CAD Change"
if hasattr(params, 'featureAngleDefault'):
VRPMainWindow.tesselationPanel.setParams(key)
VRPMainWindow.tesselationPanel.setParams(params)
"""
# vis = VRPMainWindow.globalAccessToTreeView.getItemData(key).isChecked
vis = False
paramsForTree = NamedCheckable(params.name, vis)
Application.vrpApp.key2params[key] = params
#Application.vrpApp.mw.raisePanelForKey(key)
elif TYPE_2D_PART == typeNr:
self.__copyNames.append(params.name)
elif TYPE_2D_COMPOSED_PART == typeNr:
if self.__objects[key].params.name == 'Composed.2DPart':
parentPanelParams = Application.vrpApp.mw.getPanelForKey(
self.getParentOfObject(key)).getParams()
self.__objects[key].params.name = parentPanelParams.name
self.__objects[key].params.subKeys = parentPanelParams.subKeys
self.__objects[
key].params.definitions = parentPanelParams.definitions
#VRPMainWindow.globalAccessToTreeView.setItemData(key, parentPanelParams.name)
Application.vrpApp.mw.globalAccessToTreeView().setItemData(
key, parentPanelParams.name)
theGuiMsgHandler().setParams(key, params)
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
theGuiMsgHandler().runObject(key)
elif TYPE_3D_PART == typeNr:
self.__copyNames.append(params.name)
elif TYPE_3D_COMPOSED_PART == typeNr:
if self.__objects[key].params.name == 'Composed.3DPart':
parentPanelParams = Application.vrpApp.mw.getPanelForKey(
self.getParentOfObject(key)).getParams()
self.__objects[key].params.name = parentPanelParams.name
self.__objects[key].params.subKeys = parentPanelParams.subKeys
self.__objects[
key].params.velDefinitions = parentPanelParams.velDefinitions
#VRPMainWindow.globalAccessToTreeView.setItemData(key, parentPanelParams.name)
Application.vrpApp.mw.globalAccessToTreeView().setItemData(
key, parentPanelParams.name)
theGuiMsgHandler().setParams(key, params)
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
theGuiMsgHandler().runObject(key)
elif TYPE_PRESENTATION == typeNr:
Application.vrpApp.mw.presenterManager.updateForObject(key)
#Application.vrpApp.mw.raisePanelForKey(key)
elif TYPE_JOURNAL == typeNr:
Application.vrpApp.globalJournalMgrParams = params
"""
if params.currentIdx==params.maxIdx:
Application.vrpApp.mw.editRedoAction.setEnabled(False)
Application.vrpApp.mw.editUndoAction.setEnabled(True)
else:
Application.vrpApp.mw.editUndoAction.setEnabled(True)
Application.vrpApp.mw.editRedoAction.setEnabled(True)
if params.currentIdx<=0:
Application.vrpApp.mw.editUndoAction.setEnabled(False)
"""
elif TYPE_PRESENTATION_STEP == typeNr:
Application.vrpApp.mw.presenterManager.setParams(key, params)
elif TYPE_VIEWPOINT == typeNr:
# do not add the default viewpoints to listview
if not params.view == None and not params.view == 'default':
Application.vrpApp.mw.viewpointManager.addViewpoint(key)
Application.vrpApp.mw.viewpointManager.setParams(key, params)
#VRPMainWindow.globalAccessToTreeView.setItemSelected(key, True)
elif TYPE_VIEWPOINT_MGR == typeNr:
Application.vrpApp.mw.viewpointManager.updateForObject(key)
elif TYPE_TRACKING_MGR == typeNr:
Application.vrpApp.mw.trackingManager.updateForObject(key)
elif VIS_2D_RAW == typeNr:
""" CAD Change
paramsForTreeView = NamedCheckable(params.name, params.isVisible)
VRPMainWindow.globalAccessToTreeView.setItemData(key, paramsForTreeView)
"""
self.refactoringThing02(requestNr, key, params)
self.checkForUpdate(key, params)
#need to do this for copieing 2d parts
self.setParams(key, params)
elif VIS_3D_BOUNDING_BOX == typeNr:
self.refactoringThing02(requestNr, key, params)
elif VIS_COVISE == typeNr or VIS_DOCUMENT == typeNr or TYPE_CAD_PRODUCT == typeNr:
if not self.newCoviseFileName == None:
if hasattr(params, 'documentName'):
# check if document exists
filename = self.newCoviseFileName
if getExistingFilename(filename) == None:
raise CoviseFileNotFoundError(filename)
params.documentName = os.path.basename(
filename) #(self.newCoviseFileName)
params.documentName = params.documentName[:len(
params.documentName) - 4]
params.imageName = filename #self.newCoviseFileName
params.name = params.documentName
else:
params.filename = self.newCoviseFileName
params.name = os.path.basename(self.newCoviseFileName)
self.newCoviseFileName = None
if hasattr(params, 'documentName'):
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
# check if document exists
filename = params.imageName
if getExistingFilename(filename) == None:
raise CoviseFileNotFoundError(filename)
params.imageName = filename
if hasattr(params, 'isVisible'):
p = NamedCheckable(params.name, params.isVisible)
else:
p = params.name
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, p)
theGuiMsgHandler().setParams(key, params)
theGuiMsgHandler().runObject(key)
elif VIS_VRML == typeNr:
if not self.newCoviseFileName == None:
params.filename = self.newCoviseFileName
params.name = os.path.basename(self.newCoviseFileName)
self.newCoviseFileName = None
theGuiMsgHandler().setParams(key, params)
p = params.name
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, p)
elif VIS_SCENE_OBJECT == typeNr:
if not self.newCoviseFileName == None:
params.filename = self.newCoviseFileName
params.name = os.path.basename(self.newCoviseFileName)
self.newCoviseFileName = None
theGuiMsgHandler().setParams(key, params)
theGuiMsgHandler().runObject(key)
p = params.name
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, p)
elif TYPE_COLOR_TABLE == typeNr:
Application.vrpApp.mw.globalColorManager().setParams(key, params)
else:
assert False, 'unknown type'
if key in Application.vrpApp.guiKey2visuKey:
visKey = Application.vrpApp.guiKey2visuKey[key]
self.__objects[visKey].params.name = params.name
theGuiMsgHandler().setParams(visKey, self.__objects[visKey].params)
theGuiMsgHandler().answerOk(requestNr)
def setParamsCB(self, requestNr, key, params):
""" received params from negotiator """
_infoer.write('setParamsCB(requestNr %s, key %s, paramName= %s)' % ( str(requestNr), str(key), str(params.name)))
if not key in self.__objects:
return
self.__objects[key].params = params
self.sigGuiParamChanged.emit(key )
#for compatibility
Application.vrpApp.key2params[key] = params
typeNr = self.__objects[key].type
if (typeNr in [TYPE_SCENEGRAPH_ITEM, TYPE_COLOR_CREATOR, TYPE_COLOR_MGR, VIS_DOMAINLINES, TYPE_SCENEGRAPH_MGR, TYPE_DNA_MGR, TYPE_DNA_ITEM, TYPE_GENERIC_OBJECT_MGR, TYPE_GENERIC_OBJECT, TYPE_JOURNAL_STEP, TYPE_PROJECT, TYPE_CASE, TYPE_2D_GROUP, TYPE_3D_GROUP, TYPE_2D_CUTGEOMETRY_PART]):
pass
elif typeNr in [VIS_STREAMLINE, VIS_MOVING_POINTS, VIS_PATHLINES, VIS_STREAMLINE_2D, VIS_PLANE, VIS_VECTOR, VIS_ISOPLANE, VIS_ISOCUTTER, VIS_CLIPINTERVAL, VIS_VECTORFIELD, VIS_DOMAINSURFACE]: #, VIS_POINTPROBING, VIS_MAGMATRACE
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
self.checkForUpdate( key, params)
elif TYPE_CAD_PART == typeNr:#TYPE_2D_PART == typeNr or
""" CAD Change"
if hasattr(params, 'featureAngleDefault'):
VRPMainWindow.tesselationPanel.setParams(key)
VRPMainWindow.tesselationPanel.setParams(params)
"""
# vis = VRPMainWindow.globalAccessToTreeView.getItemData(key).isChecked
vis = False
paramsForTree = NamedCheckable(params.name, vis)
Application.vrpApp.key2params[key] = params
#Application.vrpApp.mw.raisePanelForKey(key)
elif TYPE_2D_PART == typeNr:
self.__copyNames.append(params.name)
elif TYPE_2D_COMPOSED_PART == typeNr:
if self.__objects[key].params.name == 'Composed.2DPart':
parentPanelParams = Application.vrpApp.mw.getPanelForKey(self.getParentOfObject(key)).getParams()
self.__objects[key].params.name = parentPanelParams.name
self.__objects[key].params.subKeys = parentPanelParams.subKeys
self.__objects[key].params.definitions = parentPanelParams.definitions
#VRPMainWindow.globalAccessToTreeView.setItemData(key, parentPanelParams.name)
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, parentPanelParams.name)
theGuiMsgHandler().setParams( key, params )
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
theGuiMsgHandler().runObject(key)
elif TYPE_3D_PART == typeNr:
self.__copyNames.append(params.name)
elif TYPE_3D_COMPOSED_PART == typeNr:
if self.__objects[key].params.name == 'Composed.3DPart':
parentPanelParams = Application.vrpApp.mw.getPanelForKey(self.getParentOfObject(key)).getParams()
self.__objects[key].params.name = parentPanelParams.name
self.__objects[key].params.subKeys = parentPanelParams.subKeys
self.__objects[key].params.velDefinitions = parentPanelParams.velDefinitions
#VRPMainWindow.globalAccessToTreeView.setItemData(key, parentPanelParams.name)
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, parentPanelParams.name)
theGuiMsgHandler().setParams( key, params )
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
theGuiMsgHandler().runObject(key)
elif TYPE_PRESENTATION == typeNr:
Application.vrpApp.mw.presenterManager.updateForObject(key)
#Application.vrpApp.mw.raisePanelForKey(key)
elif TYPE_JOURNAL == typeNr:
Application.vrpApp.globalJournalMgrParams = params
"""
if params.currentIdx==params.maxIdx:
Application.vrpApp.mw.editRedoAction.setEnabled(False)
Application.vrpApp.mw.editUndoAction.setEnabled(True)
else:
Application.vrpApp.mw.editUndoAction.setEnabled(True)
Application.vrpApp.mw.editRedoAction.setEnabled(True)
if params.currentIdx<=0:
Application.vrpApp.mw.editUndoAction.setEnabled(False)
"""
elif TYPE_PRESENTATION_STEP == typeNr:
Application.vrpApp.mw.presenterManager.setParams( key, params )
elif TYPE_VIEWPOINT == typeNr:
# do not add the default viewpoints to listview
if not params.view == None and not params.view == 'default':
Application.vrpApp.mw.viewpointManager.addViewpoint(key)
Application.vrpApp.mw.viewpointManager.setParams( key, params )
#VRPMainWindow.globalAccessToTreeView.setItemSelected(key, True)
elif TYPE_VIEWPOINT_MGR == typeNr:
Application.vrpApp.mw.viewpointManager.updateForObject(key)
elif TYPE_TRACKING_MGR == typeNr:
Application.vrpApp.mw.trackingManager.updateForObject(key)
elif VIS_2D_RAW == typeNr:
""" CAD Change
paramsForTreeView = NamedCheckable(params.name, params.isVisible)
VRPMainWindow.globalAccessToTreeView.setItemData(key, paramsForTreeView)
"""
self.refactoringThing02(requestNr, key, params)
self.checkForUpdate( key, params)
#need to do this for copieing 2d parts
self.setParams(key, params)
elif VIS_3D_BOUNDING_BOX == typeNr:
self.refactoringThing02(requestNr, key, params)
elif VIS_COVISE==typeNr or VIS_DOCUMENT==typeNr or TYPE_CAD_PRODUCT==typeNr:
if not self.newCoviseFileName==None:
if hasattr( params, 'documentName' ):
# check if document exists
filename = self.newCoviseFileName
if getExistingFilename(filename) == None:
raise CoviseFileNotFoundError(filename)
params.documentName = os.path.basename(filename)#(self.newCoviseFileName)
params.documentName = params.documentName[:len(params.documentName)-4]
params.imageName = filename#self.newCoviseFileName
params.name = params.documentName
else :
params.filename = self.newCoviseFileName
params.name = os.path.basename(self.newCoviseFileName)
self.newCoviseFileName=None
if hasattr( params, 'documentName' ):
#Application.vrpApp.mw.raisePanelForKey(key)
theGuiMsgHandler().answerOk(requestNr)
# check if document exists
filename = params.imageName
if getExistingFilename(filename) == None:
raise CoviseFileNotFoundError(filename)
params.imageName = filename
if hasattr( params, 'isVisible'):
p = NamedCheckable(params.name, params.isVisible)
else:
p = params.name
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, p)
theGuiMsgHandler().setParams( key, params )
theGuiMsgHandler().runObject(key)
elif VIS_VRML==typeNr:
if not self.newCoviseFileName==None:
params.filename = self.newCoviseFileName
params.name = os.path.basename(self.newCoviseFileName)
self.newCoviseFileName=None
theGuiMsgHandler().setParams( key, params )
p = params.name
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, p)
elif VIS_SCENE_OBJECT==typeNr:
if not self.newCoviseFileName==None:
params.filename = self.newCoviseFileName
params.name = os.path.basename(self.newCoviseFileName)
self.newCoviseFileName=None
theGuiMsgHandler().setParams( key, params )
theGuiMsgHandler().runObject(key)
p = params.name
Application.vrpApp.mw.globalAccessToTreeView().setItemData(key, p)
elif TYPE_COLOR_TABLE==typeNr:
Application.vrpApp.mw.globalColorManager().setParams( key, params)
else:
assert False, 'unknown type'
if key in Application.vrpApp.guiKey2visuKey:
visKey = Application.vrpApp.guiKey2visuKey[key]
self.__objects[visKey].params.name = params.name
theGuiMsgHandler().setParams( visKey, self.__objects[visKey].params )
theGuiMsgHandler().answerOk(requestNr)
