def run(self, name=None):
state = VintageState(self.view)
state.cancel_macro = False
if not (name and state.latest_macro_name):
return
if name == '@':
# Run the macro recorded latest.
commands = state.macros[state.latest_macro_name]
else:
try:
commands = state.macros[name]
except KeyError:
# TODO: Add 'delayed message' support to VintageState.
return
for cmd in commands:
if state.cancel_macro:
utils.blink()
break
self.view.run_command(cmd['command'], cmd['args'])
def run(self, name=None):
state = VintageState(self.view)
state.cancel_macro = False
if not (name and state.latest_macro_name):
return
if name == '@':
# Run the macro recorded latest.
commands = state.macros[state.latest_macro_name]
else:
try:
commands = state.macros[name]
except KeyError:
# TODO: Add 'delayed message' support to VintageState.
return
for cmd in commands:
if state.cancel_macro:
utils.blink()
break
self.view.run_command(cmd['command'], cmd['args'])
def run(self, edit, **vi_cmd_data):
self.debug("Data in ViRunCommand:", vi_cmd_data)
state = VintageState(self.view)
try:
# Always save carets just in case.
self.save_caret_pos()
# If we're about to jump, we need to remember the current position so we can jump back
# here. XXX creates_jump_at_current_position might be redundant.
# TODO: Extract method.
if vi_cmd_data['creates_jump_at_current_position'] or vi_cmd_data['is_jump']:
self.add_to_jump_list(vi_cmd_data)
sels_before_motion = list(self.view.sel())
# XXX: Fix this. When should we run the motion exactly?
if vi_cmd_data['action']:
# If no motion is present, we know we just have to run the action (like ctrl+w, v).
if ((vi_cmd_data['motion']) or
(vi_cmd_data['motion_required'] and
not view.has_non_empty_selection_region())):
self.do_whole_motion(vi_cmd_data)
# The motion didn't change the selections: abort action if so required.
# TODO: What to do with .post_action() and .restore_original_carets_if_needed() in this event?
if (vi_cmd_data['mode'] in (_MODE_INTERNAL_NORMAL, MODE_VISUAL) and
any([(old == new) for (old, new) in zip(sels_before_motion, list(self.view.sel()))]) and
vi_cmd_data['cancel_action_if_motion_fails']):
# TODO: There should be a method that lets us do this without modifying vi_cmd_data.
vi_cmd_data['restore_original_carets'] = True
# FIXME: This is redundant: we call the same method in 'finally' clause.
self.restore_original_carets_if_needed(vi_cmd_data)
utils.blink()
state.cancel_macro = True
return
self.reorient_begin_to_end(vi_cmd_data)
self.do_action(vi_cmd_data)
else:
self.do_whole_motion(vi_cmd_data)
if (vi_cmd_data['mode'] == MODE_NORMAL and
any([(old == new) for (old, new) in zip(sels_before_motion, list(self.view.sel()))])):
state.cancel_macro = True
utils.blink()
finally:
# XXX: post_action should be run only if do_action succeeds (?).
self.do_post_action(vi_cmd_data)
# TODO: Extract method.
if vi_cmd_data['must_update_xpos']:
state = VintageState(self.view)
state.update_xpos()
self.do_modify_selections(vi_cmd_data)
self.restore_original_carets_if_needed(vi_cmd_data)
# TODO: Extract method.
if vi_cmd_data['scroll_into_view']:
if vi_cmd_data['scroll_command']:
self.view.run_command(*vi_cmd_data['scroll_command'])
else:
# TODO: If moving by lines, scroll the minimum amount to display the new sels.
self.view.show(self.view.sel()[0])
# We cannot run (maybe_)mark_undo_groups_for_gluing/glue_marked_undo_groups commands
# within a command meant to be subsumed in the group to be glued. It won't work. So
# let's save the data we need to transtion to the next mode, which will be taken care
# of later by VintageState.reset().
# XXX: This code can probably be moved to VintageState.run().
# TODO: Extract method.
state = VintageState(self.view)
state.next_mode = vi_cmd_data['next_mode']
state.next_mode_command = vi_cmd_data['follow_up_mode']
def run(self, edit, **vi_cmd_data):
self.debug("Data in ViRunCommand:", vi_cmd_data)
state = VintageState(self.view)
try:
# Always save carets just in case.
self.save_caret_pos()
# If we're about to jump, we need to remember the current position so we can jump back
# here. XXX creates_jump_at_current_position might be redundant.
# TODO: Extract method.
if vi_cmd_data['creates_jump_at_current_position'] or vi_cmd_data[
'is_jump']:
self.add_to_jump_list(vi_cmd_data)
sels_before_motion = list(self.view.sel())
# XXX: Fix this. When should we run the motion exactly?
if vi_cmd_data['action']:
# If no motion is present, we know we just have to run the action (like ctrl+w, v).
if ((vi_cmd_data['motion'])
or (vi_cmd_data['motion_required']
and not view.has_non_empty_selection_region())):
self.do_whole_motion(vi_cmd_data)
# The motion didn't change the selections: abort action if so required.
# TODO: What to do with .post_action() and .restore_original_carets_if_needed() in this event?
if (vi_cmd_data['mode']
in (_MODE_INTERNAL_NORMAL, MODE_VISUAL)
and any([(old == new) for (old, new) in zip(
sels_before_motion, list(self.view.sel()))])
and vi_cmd_data['cancel_action_if_motion_fails']):
# TODO: There should be a method that lets us do this without modifying vi_cmd_data.
vi_cmd_data['restore_original_carets'] = True
# FIXME: This is redundant: we call the same method in 'finally' clause.
self.restore_original_carets_if_needed(vi_cmd_data)
utils.blink()
state.cancel_macro = True
return
self.do_action(vi_cmd_data)
else:
self.do_whole_motion(vi_cmd_data)
if (vi_cmd_data['mode'] == MODE_NORMAL
and any([(old == new) for (old, new) in zip(
sels_before_motion, list(self.view.sel()))])):
state.cancel_macro = True
utils.blink()
finally:
# XXX: post_action should be run only if do_action succeeds (?).
self.do_post_action(vi_cmd_data)
# TODO: Extract method.
if vi_cmd_data['must_update_xpos']:
state = VintageState(self.view)
state.update_xpos()
self.do_modify_selections(vi_cmd_data)
self.restore_original_carets_if_needed(vi_cmd_data)
# TODO: Extract method.
if vi_cmd_data['scroll_into_view']:
if vi_cmd_data['scroll_command']:
self.view.run_command(*vi_cmd_data['scroll_command'])
else:
# TODO: If moving by lines, scroll the minimum amount to display the new sels.
self.view.show(self.view.sel()[0])
# We cannot run (maybe_)mark_undo_groups_for_gluing/glue_marked_undo_groups commands
# within a command meant to be subsumed in the group to be glued. It won't work. So
# let's save the data we need to transtion to the next mode, which will be taken care
# of later by VintageState.reset().
# XXX: This code can probably be moved to VintageState.run().
# TODO: Extract method.
state = VintageState(self.view)
state.next_mode = vi_cmd_data['next_mode']
state.next_mode_command = vi_cmd_data['follow_up_mode']
